CCC Vishay Electro-Films CHIP RESISTORS Thin Film, 1010 Center-Tapped Resistors on Alumina FEATURES * Wire bondable * Larger single size for extended value range Product may not be to scale * Resistance range total: 100 to 1 M Custom values: RA or RB - 50 to 500 k * Power: 400 mW The CCC series resistor chips offer good 400 mW power, low shunt capacitance and a center tap feature. The CCCs nichrome resistor material offers excellent stability. The CCCs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. The CCCs are 100 % electrically tested and visually inspected to MIL-STD-883. * Alumina substrate * Low stray capacitance: < 0.2 pF * Resistor material: Nichrome APPLICATIONS Vishay EFI CCC chip resistors provide excellent high-frequency response and are ideally suited for prototyping. Typical application areas are: * Amplifiers * Couplers * Oscillators * Filters * Attenuators Recommended for hermetic environment where die is not exposed to moisture. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES PROCESS CODE Tightest Standard Tolerance Available 0.1 % CLASS H* 203 200 201 202 *MIL-PRF-38534 inspection criteria 10 ppm/C 25 ppm/C 50 ppm/C 100 ppm/C 100 200 500 k CLASS K* 207 204 205 206 1 M STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Noise, MIL-STD-202, Method 308 - 20 dB typ. Center Tap Ratio, RA/RB: Tolerance 11% Stability, 1000 h, + 125 C, 400 mW 0.1 % max. R/R Operating Temperature Range - 55 C to + 125 C Thermal Shock, MIL-STD-202, Method 107, Test Condition F 0.25 % max. R/R High Temperature Exposure, + 150 C, 100 h 0.25 % max. R/R Dielectric Voltage Breakdown 400 V 1012 min. Insulation Resistance Operating Voltage 200 V max. DC Power Rating at + 125 C 400 mW max. 5 x Rated Power Short-Time Overload, + 25 C, 5 s www.vishay.com 70 For technical questions, contact: efi@vishay.com 0.25 % max. R/R Document Number: 61010 Revision: 11-Mar-08 CCC Thin Film, 1010 Center-Tapped Resistors on Vishay Electro-Films Alumina 0.100 0.010 0.010 CHIP RESISTORS DIMENSIONS in inches 0.010 0.100 0.082 0.005 SCHEMATIC R T = RA + R B RA RB MECHANICAL SPECIFICATIONS in inches PARAMETER Chip Size 0.100 x 0.100 0.003 (2.5 x 2.5 0.08 mm) Chip Thickness 0.010 0.002 (0.25 0.03 mm) Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish Resistor Material Nichrome Bonding Pad Size 0.005 x 0.010 (0.12 x 0.24 mm) minimum Number of Pads 6 Pad Material 25 kA minimum gold standard Backing None Options: Gold back for solder die attach Contact Applications Engineer ORDERING INFORMATION Example: 100 % visual, RT = 500 , 50 , 10 %, 50 ppm/C TCR, RA = RB = RT/2, gold pads, class H visual inspection For tighter ratio tolerance, RA, RB or user trim consult factory for P/N. W INSPECTION/ PACKAGING W = 100 % visually inspected parts X = Sample, visually inspected loaded in matrix trays (4 % AQL) Document Number: 61010 Revision: 11-Mar-08 CCC PRODUCT FAMILY 201 PROCESS CODE See Process Code table 5000 RESISTANCE VALUE Use first 4 significant digits of resistance (RT) For technical questions, contact: efi@vishay.com A MULTIPLIER CODE B = 0.01 A = 0.1 0=1 1 = 10 K TOLERANCE CODE B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % G = 2.0 % H = 2.5 % J = 5.0 % K = 10 % *Coating standard www.vishay.com 71 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1