RNF-100 Flexible, flame-retardant, high performance, polyolefin heat-shrinkable tubing RNF-100 tubing is a high-quality, heat-shrinkable product for a wide variety of uses. It has become the industry standard for insulation, strain relief, wire bundling, and color-coding in both commercial and military applications. RNF-100 tubing meets the requirements of AMS-DTL-23053/5, Class 1 (colors) and Class 2 (clear). It is also UL-recognized and CSA-certified at 125C, 600 V. Made from flame-retardant polyolefin, RNF-100 tubing has excellent physical, chemical, and electrical properties that meet industrial and military requirements for a highly reliable, general-purpose tubing. It sets itself apart in that it offers a higher level of performance at elevated temperature, including mechanical abrasion and fluid resistance, than many heat-shrinkable polyolefin tubings available in the marketplace today. Only a few sizes of RNF-100 tubing are required to cover many substrate diameters. Temperature rating Minimum shrink temperature: Continuous operating temperature: 121C -55C to 135C Specifications* (R) Type RNF-100 Type 1 (colors) RNF-100 Type 2 (clear) Raychem RT-350 Type 1 RT-350 Type 2 Military AMS-DTL-23053/5, Cl. 1 AMS-DTL-23053/5, Cl. 2 UL E35586 CSA LR31929 *When ordering, always specify latest issue. Dimensions (millimeters/inches) W Expanded as supplied Fully recovered after heating D Size 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 Inside diameter D (min.) Expanded as supplied 1.2 0.046 1.6 0.063 2.4 0.093 3.2 0.125 4.7 0.187 6.4 0.250 9.5 0.375 12.7 0.500 d (max.) Recovered after heating 0.6 0.023 0.8 0.031 1.2 0.046 1.6 0.062 2.4 0.093 3.2 0.125 4.8 0.187 6.4 0.250 Wall thickness W Recovered after heating** 0.40 0.08 0.016 0.003 0.43 0.08 0.017 0.003 0.51 0.08 0.020 0.003 0.51 0.08 0.020 0.003 0.51 0.08 0.020 0.003 0.64 0.08 0.025 0.003 0.64 0.08 0.025 0.003 0.64 0.08 0.025 0.003 Size 3/4 1 1 1/4 1 1/2 2 3 4 5 Inside diameter D (min.) Expanded as supplied 19.1 0.750 25.4 1.000 31.7 1.250 38.1 1.500 50.8 2.000 76.2 3.000 101.6 4.000 127.0 5.000 d d (max.) Recovered after heating 9.5 0.375 12.7 0.500 15.9 0.625 19.1 0.750 25.4 1.000 38.1 1.500 50.8 2.000 63.5 2.500 Wall thickness W Recovered after heating** 0.77 0.08 0.030 0.003 0.89 0.12 0.035 0.005 1.02 0.15 0.040 0.006 1.02 0.15 0.040 0.006 1.14 0.16 0.045 0.007 1.27 0.20 0.050 0.008 1.40 0.23 0.055 0.009 1.53 0.23 0.060 0.009 **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering information Colors Size selection Standard packaging Ordering description Standard Black (all sizes); clear, white, red, blue, green, and yellow (3/64" through 3") Nonstandard Clear, white, red, blue, and yellow (4" and 5"); brown, orange, violet, and gray (all sizes) Always order the largest size that will shrink snugly over the component being covered. On spools or in 4 foot lengths Specify product name, size, and color; for example, RNF-100-1/4-BK (BK=Black). Specification values Electrical Chemical Followed by test for: Ultimate Elongation Flammability Fungus resistance Water absorption (24 hours at 23C/73F) Fluid resistance (24 hours at 23C/73F) in: JP-8 fuel (MIL-T-5624) Skydrol 500 Hydraulic fluid (MIL-H-5606) Aviation gasoline100/300 (MIL-G-5572) Water Followed by tests for: Dielectric strength Tensile strength Unit mm (inches) percent psi (Mpa) percent psi (Mpa) Requirement Type 1 (colors) See Reverse +0, -5 1500 (10.3) minimum 200 minimum 2.5 X 104 (172) maximum 1.35 maximum No cracking Type 2 (clear) See Reverse +0, -5 1500 (10.3) minimum 200 minimum 2.5 X 104 (172) maximum 1.0 maximum No cracking Method of test ASTM D 2671 ASTM D 2671 ASTM D 2671 ASTM D 2671 ASTM D 2671 ASTM D 2671 AMS-DTL-23053 No dripping, flowing, or cracking No dripping, flowing, or cracking AMS-DTL-23053 ASTM D 2671 percent 150 minimum MIL-STD-104 MIL-STD-104 150 minimum ASTM D 2671 MIL-STD-104 ASTM D 2671 volts/mil (volts/mm) ohm-cm 500 (19,680) minimum 1014 minimum No removal of copper 500 (19,680) minimum 1016 minimum No removal of copper No pitting or blackening of copper No brittleness, glazing, cracking, or severe discoloration of tubing No pitting or blackening of copper No brittleness, glazing, cracking, or severe discoloration of tubing ASTM D 2671 ASTM D 2671 ASTM D 2671 Procedure A ASTM D 2671 Procedure B ASTM D 2671 Procedure B 200 minimum Self-extinguishing within 1 minute, 25% maximum flag burn Rating of 1 or less 0.5 maximum 200 minimum ASTM D 2671 ASTM D 2671 Procedure B Rating of 1 or less 0.2 maximum ASTM G 21 ASTM D 2671 percent percent ASTM D 2671 volts/mil (volts/mm) psi (Mpa) 400 (15,760) minimum 1000 (6.9) minimum 400 (15,760) minimum 1000 (6.9) minimum ASTM D 2671 ASTM D 2671 Note: Consult RT-350 for specific details about test procedures. Raychem is a trademark of Tyco Electronics Corporation. Users should independently evaluate the suitability of the product for their application. Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025-1164 USA Tel: (800) 926-2425 (US & Canada) Tel: +1 (650) 361-3860 (All other countries) Faraday Road Dorcan, Swindon, SN3 5HH United Kingdom Tel: +44 1793 528171 3816 Noborito, Tama-ku Kawasaki, Kanagawa 214-8533 Japan Tel: +81 44 900 5102 Asia Pacific Headquarters 26 Ang Mo Kio, Industrial Park 2 Singapore 569507 Tel: +65 4866 151 All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation's only obligations are those in the Standard Terms and Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Tyco Electronics Corporation's Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification. For more information about this product visit www.tycoelectronics.com (c) 1977, 1993, 1994, 2002 Tyco Electronics Corporation Printed in USA 1654054 Rev. 9/05 Physical Property Dimensions Longitudinal change Tensile strength Ultimate elongation Secant modulus (as supplied) Specific gravity Low temperature flexibility (4 hours at -55C/-67F) Heat shock (4 hours at 250C/482F) Heat resistance (336 hours at 175C/347F) Followed by test for: Ultimate Elongation Color Color stability (48 hours at 175C/347F) Dielectric strength Volume resistivity Copper mirror corrosion (16 hours at 175C/347F) Copper contact corrosion (168 hours at 160C/320F) Copper stability (16 hours at 160C/320F) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: RNF-100-1/16-BK-SP