3030 Series 5Z3030AW55DBZ1N2 Outline(L*W*H): 3.05*3.0*0.7 mm High flux efficiency & offer a middle power 0.5W Good thermal dissipation & optical uniformity Features Table of Contents Product Code Method ----------------------------------------2 Forward current: 150mA Maximum Rating----------------------------------------------2 Typical view angle 50% Iv: 120 Typical Product Characteristics-----------------------------3 RoHS and REACH-compliant Range of Bins--------------------------------------------------3 Lens color: yellowish Color Coordinate Comparison-------------------------------4 MSL 2a qualified according to JEDEC Electronic-optical Characteristics---------------------------5 J-STD20D Dimensions-----------------------------------------------------6 ESD Level 6KV(HBM) Reflow Profile-------------------------------------------------7 Reliability Test: AEC Q-101 qualified Test Circuit and Handling Precautions---------------------8 Applications Packing-----------------------------------------------------------9 Indoor signage display applications Precautions-----------------------------------------------------11 Indoor decorating and entertainment design Test Items and Results of Reliability-----------------------12 Flat backlight for LCD. Switch and symbol Automotive electronics Special applications Version: IS-2.0 NO.: BT-SMD-14080520 Page 1 of 12 3030 Series Product Code Method ------------------------------------------------------------------------------------------------------------------------------------ 5 - Z - 3030 - A - W55D - B - Z - 1 - N - 2 Process Type Category Lead Frame Size View Angle Dice Wavelength &Luminous Rank COB or Bracket Module Code Z: SMD 3030: A: 120o Wxxx: white B: article mode Power LED 3.05*3.0mm 5: special product CRI or Zener Assembly Code Process Code Spectral Condition Code N: PLCC procedure 2: 150mA for test 1: company code for Z: Zener different meaning Maximum Rating(Ta=25) -----------------------------------------------------------------------------------------------------------------------------------Characteristics Symbol Rating Unit DC forward current IF 150 mA Pulse forward current*3 IPF 240 mA Reverse voltage VR 5 V Junction temperature TJ 125 o Operating temperature range TOP -40-105 o Storage temperature range TSTG -40-105 o Soldering temperature*4 TSD 260 o Thermal Resistance Junction/ Solder Point Rth 50 C C C C /W Notes 1: There is no maximum or typical voltage parameter 2: For other ambient, limited setting of current will be depended on de-rating curves. 3: Duty 1/10, pulse width 0.1ms 4: The maximum of soldering time is 5 seconds in TSD Version: IS-2.0 NO.: BT-SMD-14080520 Page 2 of 12 3030 Series Typical Product Characteristics (Ta=25) -----------------------------------------------------------------------------------------------------------------------------------Characteristics Symbol Min. Typ. Max. Unit Test condition Forward Voltage VF 2.8 - 3.8 V IF=150mA Reverse Current IR - - 10 A VR=5V Luminous Lumen 30 38 - lm IF=150mA View Angle 21/2 - 120 - deg IF=150mA x - 0.556 - - y - 0.424 - - Color Coordinate IF=150mA Notes: 1. Measurement Errors: Forward Voltage: 0.1V, Luminous Lumen: 10%, View Angle: 5%, Color Coordinate (x, y) 0.006 2. Electrical-Optical characteristics (Ta=25) Range of Bins -----------------------------------------------------------------------------------------------------------------------------------1). Forward Voltage Bins (IF=150mA) Bin Code Min. VF (V) Max. VF (V) B 2.8 2.9 C 2.9 3.0 D 3.0 3.1 E 3.1 3.2 F 3.2 3.3 G 3.3 3.4 H 3.4 3.5 I 3.5 3.6 J 3.6 3.7 K 3.7 3.8 2). Luminous Lumen Bins (IF=150mA) Bin Code Min. (lm) Max. (lm) 21 30 35 22 35 40 23 40 45 Version: IS-2.0 NO.: BT-SMD-14080520 Page 3 of 12 3030 Series Color Coordinate Comparison ------------------------------------------------------------------------------------------------------------------------------------ Color Rank BIN x y 0.56 0.44 0.5375 0.4174 Y1 Version: IS-2.0 BIN x y BIN 0.5745 0.4253 0.5566 0.4076 Y2 x y 0.5908 0.409 0.578 0.3972 Y3 0.5566 0.4076 0.578 0.3972 0.5745 0.4253 0.5908 0.409 NO.: BT-SMD-14080520 0.5933 0.3896 0.61 0.3896 Page 4 of 12 3030 Series Electronic-Optical Characteristics Relative luminous Intensity(%) -----------------------------------------------------------------------------------------------------------------------------------1).Relative Spectral Distribution 2).Typical Spatial Distribution 3).Relative Luminous Flux .Current 4).Relative Luminous Flux .Ambient Temperature 5). Electrical Characteristics 6).Forward Voltage Temperature 7). Chromaticity Coordinate and Temperature Version: IS-2.0 8).Thermal Design NO.: BT-SMD-14080520 Page 5 of 12 3030 Series Dimensions ------------------------------------------------------------------------------------------------------------------------------------ Cathode Mark 2 1 Cathode 1 2 Recommend Pad layout Notes: 1. All dimensions are in millimeters 2. Tolerance is 0.1mm unless otherwise noted 3. Specifications are subject to change without notice. Version: IS-2.0 NO.: BT-SMD-14080520 Page 6 of 12 3030 Series Reflow Profile -----------------------------------------------------------------------------------------------------------------------------------1. IR reflow soldering Profile for Lead Free solder 300 250 temperature 10sec. max 1-5/sec Pre heating 150-180 200 260 max 2-5/sec 230 max 2-5/sec 150 120sec.Max 50sec.max 100 50 25 0 0 50 100 Time 150 200 250 300 sec Notes: 1. We recommend the reflow temperature 240 (5).the maximum soldering temperature should be limited to 260. 2. Don't cause stress to the silicone resin while it is exposed to high temperature. 3. Number of reflow process shall be less than 3 times. Version: IS-2.0 NO.: BT-SMD-14080520 Page 7 of 12 3030 Series Test Circuit and Handling Precautions -----------------------------------------------------------------------------------------------------------------------------------1. Test circuit V LED 2. Handling precautions 2.1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2.2. Storage 1). It is recommended to store the products in the following conditions: Humidity: 60% R.H. Max. Temperature: 5~30(41~86) 2). Shelf life in sealed bag: 12 month at 5~30 and 60% R.H. after the package is Opened, the products should be used within 4 weeks or they should be keeping to stored at 20%R.H. with zip-lock sealed. 2.3. Baking If the package has been opened for more than 4 weeks, it is recommended to bake the products with the following instruction: 1). 603 X 6hrs and 5%RH, for reel 2). 1253 X 2hrs, for single LED It shall be normal to see slight color fading of carrier (light yellow) after baking in process Version: IS-2.0 NO.: BT-SMD-14080520 Page 8 of 12 3030 Series Packing ----------------------------------------------------------------------------------------------------------------------------------- Dimensions of Reel (Unit: mm) 600.50 130.2 1730.10 Unit:mm 90.5 Labelposition 8.00.15 Dimensions of Tape (Unit: mm) 1.550.05 2.00.05 0.20 0.10 5.250.10 4.00.10 4.00.10 1.0 Arrangement of Tape Empty parts Loaded Parts Empty Parts (min.10) (LED:4000Pcs) (min.40) Feeding Direction Cover Tape Emboss Tape Conclusion Parts Introduction Parts (Min.40mm) (Min.160mm) Notes: 1. Empty component pockets are sealed with top cover tape 2. The max loss number of SMD is 2pcs 3. The cathode is oriented towards the tape sprocket hole in accordance with ANSI/EIA RS-481 specifications 4. 4,000pcs per reel 5. The remainder packing in multiples of 500pcs. Version: IS-2.0 NO.: BT-SMD-14080520 Page 9 of 12 3030 Series Packing ----------------------------------------------------------------------------------------------------------------------------------- Packaging specifications Reel(4000pcs) Moisture-poof bag Label inspection request form Inner box(Max. 7 reels) Label Outer box(Max. 4 inner boxes) . Notes: Reeled product (max.4,000) is packed in a sealed moisture-proof bag. Seven bags are packed in an inner box (size: about 260 X 230 X 100 mm) and four inner boxes are in an outer box (size: about 480 X 275 X 215 mm). On the label of moisture-poof bag, there should be the information of Part No., Lot No. and quantity number; also the total quantity number should be on inspection request form on outer box. Version: IS-2.0 NO.: BT-SMD-14080520 Page 10 of 12 3030 Series Precautions ----------------------------------------------------------------------------------------------------------------------------------1. Abnormal situation caused by improper setting of collet To choose the right collet is the key issue in improving the product's quality. LED is different from other electronic components, which is not only about electrical output but also for optical output. This characteristic made LED more fragile in the process of SMT. If the collet's lowering down height is not well set, it will bring damage to the gold wire at the time of collet's picking up and loading which will cause the LED fail to light up, light up now and then or other quality problems 2. How to choose the collet During SMT, please choose the collet that has larger outer diameter than the lighting area of lens, in case that improper position of collet will damage the gold wire inside the LED. Different collets fit for different products, please refer to the following pictures cross out Outer diameter of collet should be larger than the lighting area Picture 1() Picture 2(X) 3. Other points for attention A. No pressure should be exerted to the epoxy shell of the SMD under high temperature. B. Do not scratch or wipe the lens since the lens and gold wire inside are rather fragile and cross out easy to break. C. LED should be used as soon as possible when being taken out of the original package, and should be stored in anti-moisture and anti-ESD package. 4. This usage and handling instruction is only for your reference. Version: IS-2.0 NO.: BT-SMD-14080520 Page 11 of 12 3030 Series Test Items and Results of Reliability ------------------------------------------------------------------------------------------------------------------------------ Test Item Normal Temperature Life High Temperature Life Test Conditions Ta23(5) IF=150mA Ta85(5) IF=150mA Duration/ Cycle Ac/Re Number of Damage Reference 1008 hrs 0/1 0/22 JESD22 A-108 1008 hrs 0/1 0/22 JESD22 A-108 1008 hrs 0/1 0/22 JESD22 A-108 1008 hrs 0/1 0/22 JESD22 A-104 Ta85(5) High Humidity Heat Life RH=85% IF=150mA -45/30min~105 Thermal shock /30min (5) Electrostatic Discharge (ESD) Test According to the SPEC 3 cycles 0/1 0/22 AEC Q101-001 Low Temperature Storage Ta=-40 1008 hrs 0/1 0/22 JESD22-A103D High Temperature Storage Ta=125 1008 hrs 0/1 0/22 JESD22-A103D Symbol Condition *Criteria for Judging Criteria for Judgment of Pass Item Min Max Forward Voltage VF IF=150mA - USL*1x1.1 Reverse Current IR VR= 5V - 10A Luminous Lumen IF=150mA LSL*2x0.7 [ Note] 1 USL* : Upper Specification Level LSL*2: Lower Specification Level Version: IS-2.0 NO.: BT-SMD-14080520 Page 12 of 12