https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ground modular terminal block, connection method: Power-Turn connection, number of connections: 2, number of positions: 1, cross section: 10 mm-70 mm, AWG:8-2/0, width: 20 mm, color: green-yellow, mounting type: NS 35/15 Your advantages Quick and easy connection is now also possible for large conductors with the high-current terminal block The compact design enables wiring in a confined space The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors In addition to using the existing test connection, pick-off terminal blocks can be connected, each of which can also accommodate two test cables Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356998758 Weight per Piece (excluding packing) 198.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of positions 1 Number of levels 1 Number of connections 2 Nominal cross section 50 mm 01/05/2021Page1/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Technical data General Color green-yellow Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Open side panel No Ambient temperature (operation) -60 C ... 105 C (max. short-term operating temperature130C) Ambient temperature (storage/transport) -25 C ... 60 C (for a short time, not exceeding 24h, -60C to +70C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C Ambient temperature (actuation) -5 C ... 70 C Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 C Static insulating material application in cold -60 C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg 01/05/2021Page2/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Technical data General Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 20 mm Length 101 mm Height NS 35/15 105 mm Connection data Note Use an appropriate NS 35... copper or aluminum DIN rail for connection cross sections > 35 mm/2 AWG. Connection 1 level Connection method Power-Turn connection Stripping length 30 mm ... 32 mm Connection in acc. with standard IEC60947-7-1 Conductor cross section solid min. 10 mm Conductor cross section solid max. 70 mm Conductor cross section AWG min. 8 Conductor cross section AWG max. 2/0 Conductor cross section flexible min. 10 mm Conductor cross section flexible max. 70 mm Min. AWG conductor cross section, flexible 8 Max. AWG conductor cross section, flexible 2/0 Conductor cross section flexible, with ferrule without plastic sleeve min. 10 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 10 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm Cross section with insertion bridge solid min. 10 mm Cross section with insertion bridge, solid max. 50 mm Cross section with insertion bridge stranded min. 10 mm Cross section with insertion bridge, stranded max. 50 mm Cross section with insertion bridge stranded, with ferrule without plastic sleeve min. 10 mm Cross section with insertion bridge stranded, with ferrule without plastic sleeve max. 50 mm Cross section with insertion bridge stranded, with ferrule without plastic sleeve min. 10 mm 01/05/2021Page3/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Technical data Connection data Cross section with insertion bridge stranded, with ferrule with plastic sleeve 50 mm max. Connection cross sections directly pluggable 10 mm 70 mm 8 2/0 Conductor cross section solid min. 10 mm Conductor cross section solid max. 70 mm Conductor cross section flexible, with ferrule without plastic sleeve min. 10 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 10 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm Internal cylindrical gage A10 Standards and Regulations Connection in acc. with standard IEC60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 01/05/2021Page4/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Circuit diagram Schematic diagram PTPOWER AGK 10-PTPOWER 2 2 18 mm 2 2 25 mm 2 2 32 mm 2 2 40 mm 0,5 mm ... 16 mm PTPOWER 35 2,5 mm ... 35 mm PTPOWER 50 0,5 mm ... 50 mm PTPOWER 95 0,5 mm ... 95 mm PTPOWER 185 0,5 mm ... 185 mm 2 2 40 mm SZF 3-1,0 x 5,5 CLICK ! A B Classifications eCl@ss eCl@ss 10.0.1 27141141 eCl@ss 11.0 27141141 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141141 eCl@ss 8.0 27141141 eCl@ss 9.0 27141141 ETIM ETIM 5.0 EC000901 ETIM 6.0 EC000901 ETIM 7.0 EC000901 01/05/2021Page5/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Classifications UNSPSC UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals DNV GL / CSA / UL Recognized / cUL Recognized / EAC / EAC / KEMA-KEUR / IECEE CB Scheme / cULus Recognized Ex Approvals Approval details DNV GL https://approvalfinder.dnvgl.com/ TAE00000Z9 CSA http://www.csagroup.org/services-industries/product-listing/ 13631 B C mm/AWG/kcmil 8 8 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm mm/AWG/kcmil 8 FILE E 60425 01/05/2021Page6/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Approvals cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm C mm/AWG/kcmil 8 FILE E 60425 RU CDE.A*30.B.01742 EAC RU CDE.AI30.B.01102 KEMA-KEUR http://www.dekra-certification.com 71-108088 EAC mm/AWG/kcmil 10-70 IECEE CB Scheme http://www.iecee.org/ NL-57839 cULus Recognized Accessories Accessories Cable end sleeve Ferrule-A 10 -32-1090629 Ferrule, length: 32 mm, color: silver 01/05/2021Page7/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Ferrule-A 16 -32-1090633 Ferrule, length: 32 mm, color: silver Ferrule-A 25 -32-1090636 Ferrule, length: 32 mm, color: silver Ferrule-A 35 -32-1090638 Ferrule, length: 32 mm, color: silver Ferrule-A 50 -32-1090639 Ferrule, length: 32 mm, color: silver Crimping tool Crimping pliers-CRIMPFOX CENTRUS 10S-1213154 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14mm...10 mm, also for TWIN ferrules up to 2 x 4 mm, automatic cross section adjustment, lateral insertion, equipped with fall protection 01/05/2021Page8/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Crimping pliers-CRIMPFOX CENTRUS 10H-1213156 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14mm...10 mm, also for TWIN ferrules up to 2 x 4 mm, automatic cross section adjustment, lateral insertion, equipped with fall protection Crimping pliers-CRIMPFOX 10S-1212045 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14mm...10mm, unlockable pressure lock, lateral entry Crimping pliers-CRIMPFOX 10-1212721 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 4mm...10mm, lateral entry, trapezoidal crimp Crimping pliers-CRIMPFOX 25R-1212039 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 10mm...25mm, lateral entry, WM crimp Crimping pliers-CRIMPFOX 50R-1212041 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 35mm...50mm, lateral entry, WM crimp 01/05/2021Page9/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Crimping pliers-CRIMPFOX-M-1212072 Basic pliers, for accommodating dies for a wide range of type of contacts Crimping pliers-CRIMPFOX-C120-1212318 Basic pliers, for accommodating dies for a wide range of type of contacts up to 120 mm DIN rail DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/05/2021Page10/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 01/05/2021Page11/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 Documentation Mounting material-PTPOWER-IL-1180891 Operating decal for the PTPOWER End block End clamp-E/AL-NS 35-1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum Insertion bridge Insertion bridge-EB 2-20/PT-3260067 Insertion bridge, pitch: 20 mm, length: 64.5 mm, width: 35.3 mm, number of positions: 2, color: red 01/05/2021Page12/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Insertion bridge-EB 3-20/PT-3260068 Insertion bridge, pitch: 20 mm, length: 64.5 mm, width: 55.3 mm, number of positions: 3, color: red Insulating sleeve Insulating sleeve-PS-IH RD-0311579 Insulating sleeve, color: red Insulating sleeve-MPS-IH WH-0201663 Insulating sleeve, color: white Insulating sleeve-MPS-IH RD-0201676 Insulating sleeve, color: red Insulating sleeve-MPS-IH BU-0201689 Insulating sleeve, color: blue 01/05/2021Page13/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Insulating sleeve-MPS-IH YE-0201692 Insulating sleeve, color: yellow Insulating sleeve-MPS-IH GN-0201702 Insulating sleeve, color: green Insulating sleeve-MPS-IH GY-0201728 Insulating sleeve, color: gray Insulating sleeve-MPS-IH BK-0201731 Insulating sleeve, color: black Insulating sleeve-MPS-IH WH-0201663 Insulating sleeve, color: white 01/05/2021Page14/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Insulating sleeve-MPS-IH RD-0201676 Insulating sleeve, color: red Insulating sleeve-MPS-IH BU-0201689 Insulating sleeve, color: blue Insulating sleeve-MPS-IH YE-0201692 Insulating sleeve, color: yellow Insulating sleeve-MPS-IH GN-0201702 Insulating sleeve, color: green Insulating sleeve-MPS-IH GY-0201728 Insulating sleeve, color: gray 01/05/2021Page15/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Insulating sleeve-MPS-IH BK-0201731 Insulating sleeve, color: black Labeled terminal marker Marker for terminal blocks-TMT 10 R CUS-0824500 Marker for terminal blocks, can be ordered: by line, white, labeled according to customer specifications, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 6.35 x 10.15 mm Zack marker strip-ZB 10 CUS-0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB10,QR:FORTL.ZAHLEN-1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 01/05/2021Page16/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Marker for terminal blocks-ZB10,LGS:L1-N,PE-1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB10,LGS:U-N-1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 10 CUS-0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TM 10 CUS-0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack Marker strip, flat-ZBF10 CUS-0825031 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10 01/05/2021Page17/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Zack Marker strip, flat-ZBF10,LGS:FORTL.ZAHLEN-0810009 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10 Zack Marker strip, flat-ZBF10,QR:FORTL.ZAHLEN-0810025 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TMF 10 CUS-0824662 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TMF 10 CUS-0829679 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm, Number of individual labels: 36 Pick-off terminal block Pick-off terminal block-AGK 10-PTPOWER-3260145 Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom. voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm-16 mm, AWG:20-6, width: 18.5 mm, height: 34.7 mm, color: gray, mounting type: on base element 01/05/2021Page18/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Pick-off terminal block-AGK 10-PTPOWER BU-3260148 Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom. voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm-16 mm, AWG:20-6, width: 18.5 mm, height: 34.7 mm, color: blue, mounting type: on base element Pick-off terminal block-AGK 10-PTPOWER GN/YE-3260151 Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom. voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm-16 mm, AWG:20-6, width: 18.5 mm, height: 34.7 mm, color: green/yellow, mounting type: on base element Pick-off terminal block-AGK 10-PTPOWER BK/YE-3260154 Pick-off terminal block, For use with PTPOWER 50, 95, 150, and 185 Power-Turn high-current terminal blocks, nom. voltage: 1500 V, nominal current: 57 A, connection method: Push-in connection, number of connections: 2, cross section: 0.5 mm-16 mm, AWG:20-6, width: 18.5 mm, height: 34.7 mm, color: black/yellow, mounting type: on base element Planning and marking software Software-CLIP-PROJECT ADVANCED-5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails. Software-CLIP-PROJECT PROFESSIONAL-5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices. 01/05/2021Page19/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Screwdriver tools Screwdriver-SZF 3-1,0X5,5-1206612 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip Terminal marking Marker for terminal blocks-TMT 10 R-0816210 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 6.35 x 10.15 mm, Number of individual labels: 10000 Zack marker strip-ZB 10:UNBEDRUCKT-1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 10-0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TM 10-0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 01/05/2021Page20/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Zack Marker strip, flat-ZBF10:UNBEDRUCKT-0809997 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 5.15 x 10 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TMF 10-0818124 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 5.1 mm, Number of individual labels: 48 Marker for terminal blocks-UCT-TMF 10-0829204 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size: 9.4 x 4.7 mm, Number of individual labels: 36 Test plug terminal block Test plugs-PS-MT-0311647 Test plugs, color: silver Test plugs-MPS-MT-0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray 01/05/2021Page21/22 https://www.phoenixcontact.com/us/products/3260052 Ground modular terminal block-PTPOWER 50-PE-3260052 Accessories Test plugs-MPS-MT/ 4MM-3048577 Test plugs, with solder connection up to 1 mm conductor cross section, color: silver Warning label printed Cover-CEC PTPOWER 35/50-1056086 Cover, yellow, labeled: Lightning flash, mounting type: plug in Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/05/2021Page22/22