D2S Subminiature Basic Switch Subminiature Switch with Superb Flux Resistance One-piece terminal construction to keep out flux. High operating-position accuracy (0.25 mm) enables easy peripheral design and positioning. D 2 S Use of pin plunger also allows horizontal operation. RoHS Compliant Model Number Legend 1 @ 2 @ 3 @ 4 D2S - @ 1. Ratings 10 : 250 VAC 10.1 A 3. Maximum Operating Force (OF) None : 1.47 N {150 gf} 5 : 125 VAC 5 A 01 : 30 VDC 0.1 A -F : 0.49 N {50 gf} (For 0.1 A, 5 A) Note: The given values are for pin plunger models only. 4. Terminals None : Solder terminals 2. Actuator None : Pin plunger L : Hinge lever D : Self-clinching PCB terminals L13 : Simulated roller lever L2 : Hinge roller lever List of Models Ratings Actuator Terminals Pin plunger Hinge lever Solder terminals OF max. 1.47 N {150 gf} D2S-10 0.49 N {50 gf} - Self-clinching PCB 1.47 N {150 gf} terminals 0.49 N {50 gf} D2S-10D 0.49 N {50 gf} D2S-10L Solder terminals 0.18 N {18 gf} Self-clinching PCB 0.49 N {50 gf} terminals 0.18 N {18 gf} Simulated roller lever Solder terminals 0.49 N {50 gf} 0.18 N {18 gf} Self-clinching PCB 0.49 N {50 gf} terminals 0.18 N {18 gf} Hinge roller lever 10.1 A Solder terminals 0.49 N {50 gf} 0.18 N {18 gf} Self-clinching PCB 0.49 N {50 gf} terminals 0.18 N {18 gf} - D2S-10LD D2S-10L13 5A D2S-5 0.1 A D2S-01 D2S-5-F D2S-01-F D2S-5D D2S-01D D2S-5-FD D2S-01-FD D2S-5L D2S-01L D2S-5L-F D2S-01L-F D2S-5LD D2S-01LD D2S-5L-FD D2S-01L-FD D2S-5L13 D2S-01L13 - D2S-5L13-F D2S-01L13-F D2S-10L13D D2S-5L13D D2S-01L13D D2S-5L13-FD D2S-01L13-FD D2S-5L2 D2S-01L2 D2S-10L2 D2S-10L2D - Separator (Sold Separately), Terminal Connector (Sold Separately) D2S-5L2-F D2S-01L2-F D2S-5L2D D2S-01L2D D2S-5L2-FD D2S-01L2-FD Refer to "Basic Switch Common Accessories" 1 D2S Subminiature Basic Switch Contact Form SPDT COM NO NC Contact Specifications D 2 S Item Model D2S-10 models Specification Contact Material D2S-5 models Rivet Crossbar Silver alloy Gold alloy Gap (standard value) Inrush current 0.5 mm NC 20A max. NO 15 A max. Minimum applicable load (reference value) * * D2S-01 models 1 A max. 10 A max. 1 A max. 5 VDC 160 mA 5 VDC 1 mA Please refer to "Using Micro Loads" of "Precautions" for more information on the minimum applicable load. Ratings Characteristics Item Rated voltage Resistive load D2S-10 models 250 VAC 10.1 A D2S-5 models 125 VAC 250 VAC 5A 3A D2S-01 models 125 VAC 0.1 A 30 VDC 0.1 A Model Model Permissible operating speed Permissible operating frequency Mechanical Approved Safety Standards Vibration resistance * 2 The items shown in the "List of Models" are not standard approved models. Consult your OMRON sales representative for specific models with standard approvals. UL (UL1054)/CSA(CSA C22.2 No.55) 60 operations/min OF 0.49 N models 30m max. - 50 m max. 50 m max. Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz 1 min Between each terminals and non-current-carrying metal parts 1,500 VAC 50/60 Hz 1 min Malfunction Shock resistance Malfunction * 2 Mechanical Durability * 3 Electrical D2S-5 D2S-01 125 VAC 250 V 10.1 A 5A 3A 0.1 A - Ambient operating temperature 30 VDC - - 0.1 A Ambient operating humidity Degree of protection Weight OF 1.47 N models 1,000 VAC 50/60 Hz 1 min Durability D2S-01 models 100 M min. (at 500 VDC with insulation tester) Between terminals of the same polarity D2S-10 Model D2S-5 models 400 operations/min Electrical Contact resistance (initial value) Dielectric strength * 1 D2S-10 models 0.1 mm to 1 m/s (for pin plunger models) Insulation resistance Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 202C (2) Ambient humidity: 655% (3) Operating frequency: 30 operations/min Rated voltage Item 100 m max. 10 to 55 Hz, 1.5 mm double amplitude OF 1.47 N models 1,000 m/s2 {approx. 100G} max. OF 0.49 N models 500 m/s2 {approx. 50G} max. OF 1.47 N models 300 m/s2 {approx. 30G} max. OF 0.49 models 200 m/s2 {approx. 20G} max. 10,000,000 operations min. (60 operations/min) 30,000,000 operations min. (60 operations/min) 50,000 operations min. (30 operations/min) 200,000 operations min. (30 operations/min) IEC IP40 -25C to +85C (at ambient humidity of 60% max.) (with no icing or condensation) 85% max. (for +5C to +35C) Approx. 1.6 g (pin plunger models) Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch Common Accessories"). *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. 2 D2S Subminiature Basic Switch Terminals/Appearances (Unit: mm) Mounting Holes (Unit: mm) Solder terminals Self-clinching PCB terminals 2-2.4 dia. mounting holes or M2.3 screw holes 3.30.1 3.30.1 1.80.1 2 2 7.3 3-1.6 dia.holes 5.15 1.85 8.80.2 9.50.1 16.10.2 1.6 3.2 0.5 6.40.2 9.50.1 3.9 8.80.2 9.50.1 16.10.2 5.15 1.85 0.8 1.2 0.5 1.3 6.40.2 D 2 S <PCB Mounting Dimensions (Reference)> 3-1.351.5 dia. 8.80.2 16.10.2 PCB's thickness t1.6mm Dimensions (Unit: mm) and Operating Characteristics The following figures show models with self-clinching PCB terminals. For the solder terminals, refer to "Terminals/Appearances". The @ is replaced with the code for the terminal that you need. See the "List of Models" for available combinations of models. Pin plunger D2S-10@ D2S-5@ D2S-5-F@ D2S-01@ D2S-01-F@ 5.3 7.50.1 A 1.8 2.350.05 dia. 2.350.05 dia. 2 Model Operating characteristics OP 7.7 7 3.6 PT 1.80.1 3.30.1 3.9 0.07 dia. 2.50.07 9.50.1 16.10.2 19.80.2 Hinge lever D2S-10L@ D2S-5L@ D2S-5L-F@ D2S-01L@ D2S-01L-F@ t0.3 * 14.5 0.5 1.3 OF RF Max. 1.47 N {150 gf} 0.49 N {50 gf} Min. 0.25 N {25 gf} 0.04 N {4 gf} Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. Operating Position OP A 2.350.05 dia. 3.6 Operating characteristics FP 2.350.05 dia. 7.7 7 2 0.07 dia. 2.50.07 9.50.1 16.10.2 19.80.2 OP 1.80.1 3.30.1 Operating Force Releasing Force 0.5 1.3 * Stainless-steel lever Free Position Operating Position D2S-10L@ D2S-5L@ D2S-01L@ Max. 0.49 N {50 gf} Min. 0.06 N {6 gf} FP Max. OP D2S-5L-F@ D2S-01L-F@ 0.18 N {18 gf} 0.02 N {2 gf} 1.0 mm 0.8 mm 13.6 mm 9.40.8mm 6.40.2 A R1.3 3.6 2.350.05 dia. Operating characteristics FP OP 7.7 7 2 1.80.1 3.30.1 3.9 0.07 dia. 2.50.07 9.50.1 16.10.2 19.80.2 OF RF Overtravel OT Min. Movement Differential MD Max. t0.3 * 2.350.05 dia. 0.7 mm 0.4 mm 0.1 mm 8.40.25 mm Model 15.8 D2S-5-F@ D2S-01-F@ 6.40.2 3.9 Simulated roller lever D2S-10L13@ D2S-5L13@ D2S-5L13-F@ D2S-01L13@ D2S-01L13-F@ Operating Force Releasing Force D2S-10@ D2S-5@ D2S-01@ 0.5 1.3 Operating Force Releasing Force Model D2S-10L13@ D2S-5L13@ D2S-01L13@ OF Max. RF Min. Overtravel OT Min. Movement Differential MD Max. Free Position Operating Position FP Max. OP 0.49 N {50 gf} 0.06 N {6 gf} D2S-5L13-F@ D2S-01L13-F@ 0.18 N {18 gf} 0.02 N {2 gf} 1.0 mm 0.8 mm 15.5 mm 11.40.8 mm *Stainless-steel lever 6.40.2 Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 3 D2S Hinge roller lever D2S-10L2@ D2S-5L2@ D2S-5L2-F@ D2S-01L2@ D2S-01L2-F@ Subminiature Basic Switch 14.5 A 4.8x3.2 *2 dia. Model t=0.3 *1 2.350.05 dia. Operating characteristics FP OP 2.350.05 dia. Operating Force Releasing Force 7.7 7 2 1.80.1 3.30.1 0.07 dia. 2.50.07 9.50.1 16.10.2 19.80.2 *1. Stainless-steel lever *2. Polyacetal resin roller D2S-5L2-F@ D2S-01L2-F@ 0.49 N {50 gf} 0.06 N {6 gf} 0.18 N {18 gf} 0.02 N {2 gf} Overtravel OT Min. Movement Differential MD Max. 3.9 D 2 S OF Max. RF Min. D2S-10L2@ D2S-5L2@ D2S-01L2@ Free Position Operating Position 0.5 1.3 1.0 mm 0.8 mm FP Max. OP 19.3 mm 15.10.8 mm 6.40.2 Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Precautions Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use Soldering Mounting When using automatic soldering baths, we recommend soldering at 2605C within 5 seconds. Make sure that the liquid surface of the solder does not flow over the edge of the board. When soldering terminals manually, complete the soldering at the iron tip temperature between 350 to 400C within 3 seconds, and do not apply any external force for 1 minute after soldering. When applying solder, keep the solder away from the case of the Switch and do not allow solder or flux to flow into the case. Use M2.3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N*m {2.3 to 2.7 kgf*cm}. Using Micro Loads Voltage (V) Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The N-level reference value applies for the minimum applicable load. This value indicates the malfunction reference level for the reliability level of 60% (60). (JIS C5003) The equation, 60=0.5x10-6/operations indicates that the 1 estimated malfunction rate is less than 2,000,000 operations with a reliability level of 60%. 30 0.16 mA 26 mA 100 mA 24 Micro load type Operating range D2S-01 Normal load type Operating range D2S-5 D2S-10 12 5 1 mA 100 mA 160 mA 0 0.1 1 10 100 1,000 Current (mA) 4 D2S Subminiature Basic Switch D 2 S * Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. * Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. B092-E1-06 1014(0207)(O) 5