Spec-00040 I
WATERSHED™ WALLMOUNT ENCLOSURES AND ACCESSORIES WATERSHED™ WAll-MounT EncloSuRES AnD AccESSoRiES
EQUIPMENT PROTECTION SOLUTIONSSUBJECT TO CHANGE WITHOUT NOTICESTAINLESS STEEL1
Spec-00040
I
763.422.2211
763.422.2600
STAINLES S STEEL
WATERSHED™ WAll-MounT EncloSu RES AnD AccESS oRiES
WATERSHED™ WAll-MounT EncloSu RES AnD AccESS oRiES
HOFFMAN WATERSHED™, TYPE 4X
INDUSTRY STANDARDS
Mounting brackets required to meet UL/cUL external mounting
requirement.
UL 508A Listed; Type 4, 4X, 12; File Number E61997
cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12; File Number
E61997
NSF 169
NEMA/EEMAC Type 4, 4X, 12
IEC 60529, IP66
APPLICATION
Specifically designed for use in sanitary washdown production
environments, particularly food and beverage manufacturing.
Hoffman WATERSHED™ Enclosures feature a sloped top, sloped
door edges, bullet-style hinges and additional unique features that
facilitate washdown runoff.
• Manufactured from 14 gauge Type 304 stainless steel
• Seams continuously welded and ground smooth
• Smooth Type 304 stainless steel lift-off bullet-style hinges
• Hinges are shielded by door
• Hinged side of door has provisions to allow direct flushing of
hinge area
• 20-degree sloped top facilitates runoff of water and cleaning
solutions and prohibits the placement of objects on the top of the
enclosure
• 170-degree door opening
• Door edges are sloped 20-degrees at top and bottom edges to
facilitate runoff
• Slanted flange trough collar prohibits pooling of fluids along the
top edge of the enclosure opening
• Stainless steel quarter-turn latches furnished with flush slotted
insert
• Seamless foam-in-place gasket
• Self-grounding latch system with double seal
• Bonding provision on door; grounding stud on body
• Panel studs fit optional NEMA style panels
• Mounting holes in back of body for direct mounting, optional
stand-off kit or mounting bracket kit
• Furnished hardware kit consists of panel mounting nuts,
grounding hardware and sealing washers for wall-mounting
holes
FINISH
External surfaces have a #4 brushed finish.
ACCESSORIES
See also Accessories.
Mounting Bracket Kit
Panels for Type 3R, 4, 4X, 12 and 13 Enclosures
Stand-Off Kit
Padlocking Handle Kit
Padlocking Latch Kit
HOMITTM Vent Drains, Type 4X
HOMITTM Thermoelectric Dehumidifier
BulletIn: WS1