https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page1/8
Combination type 1/2 protective device-FLT 35-260-2800110
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Type 1 / Class I / B arrester (lightning current arrester) with encapsulated arc chopping spark gap, 1-channel.
Housing width: 17.5 mm (1 Div.)
Your advantages
High discharge capacity
1-channel
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 10 pc
GTIN
GTIN 4046356479967
Weight per Piece (excluding packing) 180.000 g
Custom tariff number 85363010
Country of origin Germany
Technical data
Dimensions
Height 88.6 mm
Width 17.6 mm
Depth 66.2 mm
Horizontal pitch 1 Div.
Ambient conditions
Degree of protection IP20 (only when all terminal points are used)
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page2/8
Combination type 1/2 protective device-FLT 35-260-2800110
Technical data
Ambient conditions
Ambient temperature (operation) -40 °C ... 85 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
General
IEC test classification I
T1
EN type T1
IEC power supply system TN-S
TN-C
TT
Mode of protection L-PEN
Mounting type DIN rail: 35 mm
Color black
Housing material PA 6.6
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type DIN rail module, one-piece
Number of positions 1
Surge protection fault message none
Protective circuit
Nominal voltage UN230/400VAC (TN)
230/400VAC (TT)
Nominal frequency fN50 Hz (60Hz)
Maximum continuous operating voltage UC (L-PEN) 385 VAC
Rated load current IL80 A
Residual current IPE ≤ 0.1 mA
Standby power consumption PC≤ 35 mVA
Nominal discharge current In (8/20) µs (L-PEN) 35 kA
Impulse discharge current (10/350) µs (L-PEN), charge 17.5 As
Impulse discharge current (10/350) µs (L-PEN), specific energy 306 kJ/Ω
Impulse discharge current (10/350)µs (L-PEN), peak current value Iimp 35 kA
Follow current interrupt rating Ifi (L-PEN) 3 kA (260 V AC)
1.5 kA (385 V AC)
Short-circuit current rating ISCCR 3 kA (260 V AC)
1.5 kA (385 V AC)
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page3/8
Combination type 1/2 protective device-FLT 35-260-2800110
Technical data
Protective circuit
Voltage protection level Up (L-PEN) ≤ 5 kV
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 5 kV
TOV behavior at UT (L-PEN) 440 VAC (5s / withstand mode)
440 VAC (120min / withstand mode)
Response time tA (L-PEN) ≤ 100 ns
Max. backup fuse with V-type through wiring 80 A AC (gG)
Max. backup fuse with branch wiring 400 A AC (gG)
Connection data
Connection method Screw connection
Screw thread M5
Tightening torque 4.5 Nm
Stripping length 14.5 mm
Conductor cross section flexible min. 2.5 mm²
Conductor cross section flexible max. 25 mm²
Conductor cross section solid min. 2.5 mm²
Conductor cross section solid max. 35 mm²
Conductor cross section AWG 6 ... 2
Standards and Regulations
Standards/regulations IEC61643-11 2011
EN61643-11 2012
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page4/8
Combination type 1/2 protective device-FLT 35-260-2800110
Dimensional drawing
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1 27130802
eCl@ss 4.0 27130800
eCl@ss 4.1 27130800
eCl@ss 5.0 27130800
eCl@ss 5.1 27130800
eCl@ss 6.0 27130800
eCl@ss 7.0 27130802
eCl@ss 8.0 27130802
eCl@ss 9.0 27130802
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page5/8
Combination type 1/2 protective device-FLT 35-260-2800110
Classifications
ETIM
ETIM 2.0 EC000381
ETIM 3.0 EC000381
ETIM 4.0 EC000381
ETIM 5.0 EC000381
ETIM 6.0 EC000381
ETIM 7.0 EC000381
UNSPSC
UNSPSC 6.01 30212010
UNSPSC 7.0901 39121610
UNSPSC 11 39121610
UNSPSC 12.01 39121610
UNSPSC 13.2 39121620
UNSPSC 18.0 39121620
UNSPSC 19.0 39121620
UNSPSC 20.0 39121620
UNSPSC 21.0 39121620
Approvals
Approvals
Approvals
EAC / EAC
Ex Approvals
Approval details
EAC EAC-Zulassung
EAC RU C-
DE.A*30.B01561
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page6/8
Combination type 1/2 protective device-FLT 35-260-2800110
Accessories
Accessories
Bridge
Wiring bridge-MPB 18/1- 2-2809209
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.
Wiring bridge-MPB 18/1- 6-2748564
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.
Wiring bridge-MPB 18/1- 8-2748577
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.
Wiring bridge-MPB 18/1- 9-2748580
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.
Wiring bridge-MPB 18/1-57-2809238
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page7/8
Combination type 1/2 protective device-FLT 35-260-2800110
Accessories
Wiring bridge-MPB 18/1-12-2748593
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.
Wiring bridge-MPB 18/1- 4-2809225
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.
Wiring bridge-MPB 18/1- 3-2809212
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.
Device marking
Zack marker strip-ZBN 18:UNBEDRUCKT-2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
End block
https://www.phoenixcontact.com/us/products/2800110
06/27/2020Page8/8
Combination type 1/2 protective device-FLT 35-260-2800110
Accessories
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Labeled device marker
Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589
Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
Marker pen
Marker pen-B-STIFT-1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com