PCL150103 - AMPHENOL - Datasheet.Directory

High Performance P-Clamps & Omega Clamps

Smart Engineering

VICTREX® PEEK™ Polymer

Overmold Technology

Luminus Series

High Performance Standoffs

More details on back

QuickClips

Engineered for lean manufacturing, the High Performance P-Clamps and Omega Clamps were developed to

replace and outperform traditional P-Clamps and Saddle Clamps. Featuring an overmold silicone cushion with

VICTREX PEEK polymer, our clamps are completely non-conductive/non-corrosive, lightweight, and very durable.

Amphenol Pcd www.amphenolpcd.com email: info@amphenolpcd.com 978-624-3400

More details on back

Benefits at a Glance

Smart Engineering

Designed for Lean Manufacturing

 Lock open & closed feature increases ease of installation

 One piece hinged design with overmolded grommet

 Easily recognizable labels makes inspection easy

 Uses standard 10-32 screws

Flexible Options

 Fuel Resistant and High Temperature resistant rubbers available

 Dedicated to pressurized and unpressurized areas

 Compatible with tubes up to 2” in diameter

 Smaller envelope than existing metal P-Clamps

 Multiple Sizes Available

 P-Clamps: 15

 Omega Clamps: 20

VICTREX PEEK Polymer

 Completely Non-Corrosive & Non-Conductive

 Improved Strength & Stability

 Lighter than Traditional P-Clamps by up to 40%

 High temperature resistance

 Withstands constant vibrations and shock loads

Overmold Technology

 Over 50 years experience in overmold technology

 Silicone or Fluorosilicone Cushion will not come off or slide off

 Allows broad range of variances in wire bundle diameters

Other Products

Technical Specifications

MATERIALS

Clamp Base Polyetheretherketone (PEEK)

per MIL-P-46183

Overmolding Silicone Rubber per

ASTM-D-2000

PERFORMANCE

Temperature

Limits

Continuous: - 65°F to 350°F

Excursions: up to 500°F

Flammability UL94, V0; FAR25.853

Amphenol Pcd www.amphenolpcd.com email: info@amphenolpcd.com 978-624-3400

Part No. Size No. Inner cushion diameter (ØD) F Length (L) H Weight T

in cm in cm in cm in cm in cm ounces grams

PCL150101 101 0.12 0.30 0.59 1.51 1.18 2.99 0.64 1.62 0.18 0.46 0.14 4.08

PCL150102 102 0.22 0.56 0.64 1.63 1.27 3.22 0.71 1.80 0.18 0.46 0.16 4.54

PCL150103 103 0.31 0.79 0.71 1.81 1.41 3.59 0.81 2.06 0.24 0.61 0.22 6.35

PCL150104 104 0.41 1.03 0.76 1.93 1.51 3.83 0.88 2.25 0.24 0.61 0.24 6.80

PCL150105 105 0.50 1.27 0.81 2.05 1.60 4.07 0.96 2.44 0.24 0.61 0.27 7.71

PCL150106 106 0.59 1.51 0.85 2.17 1.70 4.32 1.05 2.68 0.24 0.61 0.29 8.16

PCL150107 107 0.69 1.75 0.93 2.35 1.84 4.67 1.20 3.05 0.30 0.76 0.38 10.89

PCL150108 108 0.78 1.99 0.97 2.47 1.93 4.91 1.32 3.35 0.30 0.76 0.43 12.25

PCL150109 109 0.88 2.22 1.02 2.59 2.03 5.15 1.39 3.53 0.30 0.76 0.45 12.70

PCL150110 110 0.97 2.46 1.07 2.71 2.12 5.38 1.48 3.76 0.30 0.76 0.48 13.61

PCL150111 111 1.06 2.70 1.14 2.89 2.26 5.75 1.62 4.12 0.36 0.91 0.59 16.78

PCL150112 112 1.16 2.94 1.18 3.01 2.36 5.99 1.76 4.47 0.36 0.91 0.64 18.14

PCL150113 113 1.25 3.18 1.23 3.13 2.45 6.23 1.82 4.63 0.36 0.91 0.67 19.05

PCL150114 114 1.34 3.41 1.29 3.28 2.58 6.55 1.93 4.91 0.40 1.00 0.75 21.32

PCL150115 115 1.44 3.65 1.35 3.43 2.69 6.83 2.05 5.20 0.42 1.07 0.85 24.04

High Performance P-Clamps

Application Example

Securing Wire Bundle

Technical Specifications High Performance Omega Clamps

Amphenol Pcd www.amphenolpcd.com email: info@amphenolpcd.com 978-624-3400

Part No. Size

No. Inner cushion diameter (ØD) F Length (L) H E Weight C

in cm in cm in cm in cm in cm in cm ounces grams

PCL250008 08 0.45 1.14 0.78 1.98 2.19 5.56 0.91 2.31 0.20 0.51 1.56 3.96 0.32 9.07

PCL250009 09 0.51 1.30 0.81 2.06 2.25 5.72 0.97 2.46 0.20 0.51 1.62 4.11 0.34 9.53

PCL250010 10 0.57 1.45 0.84 2.13 2.31 5.87 1.03 2.62 0.20 0.51 1.68 4.27 0.35 9.98

PCL250011 11 0.63 1.60 0.89 2.26 2.42 6.15 1.14 2.90 0.25 0.64 1.79 4.55 0.43 12.32

PCL250012 12 0.70 1.78 0.93 2.36 2.49 6.32 1.21 3.07 0.25 0.64 1.86 4.72 0.46 12.94

PCL250013 13 0.77 1.96 0.96 2.44 2.56 6.50 1.28 3.25 0.25 0.64 1.93 4.90 0.48 13.61

PCL250014 14 0.83 2.11 1.00 2.54 2.62 6.65 1.34 3.40 0.25 0.64 1.99 5.05 0.50 14.06

PCL250015 15 0.89 2.26 1.03 2.62 2.68 6.81 1.40 3.56 0.25 0.64 2.05 5.21 0.53 14.95

PCL250016 16 0.95 2.41 1.08 2.74 2.79 7.09 1.51 3.84 0.30 0.76 2.16 5.49 0.67 19.05

PCL250017 17 1.01 2.57 1.11 2.82 2.85 7.24 1.57 3.99 0.30 0.76 2.22 5.64 0.70 19.96

PCL250018 18 1.07 2.72 1.14 2.90 2.91 7.39 1.63 4.14 0.30 0.76 2.28 5.79 0.72 20.41

PCL250019 19 1.13 2.87 1.17 2.97 2.97 7.54 1.69 4.29 0.30 0.76 2.34 5.94 0.75 21.32

PCL250020 20 1.20 3.05 1.22 3.10 3.07 7.80 1.79 4.55 0.33 0.84 2.44 6.20 0.80 22.68

PCL250021 21 1.26 3.20 1.24 3.15 3.10 7.87 1.82 4.62 0.30 0.76 2.47 6.27 0.80 22.68

PCL250022 22 1.33 3.38 1.27 3.23 3.17 8.05 1.89 4.80 0.30 0.76 2.54 6.45 0.82 23.13

PCL250023 23 1.39 3.53 1.30 3.30 3.23 8.20 1.95 4.95 0.30 0.76 2.60 6.60 0.85 24.04

PCL250024 24 1.45 3.68 1.33 3.38 3.29 8.36 2.01 5.11 0.30 0.76 2.66 6.76 0.84 23.80

PCL250025 25 1.51 3.84 1.36 3.45 3.35 8.51 2.07 5.26 0.30 0.76 2.72 6.91 0.90 25.40

PCL250026 26 1.57 3.99 1.39 3.53 3.41 8.66 2.13 5.41 0.30 0.76 2.78 7.06 0.91 25.85

PCL250032 32 1.95 4.95 1.58 4.02 3.82 9.70 2.54 6.45 0.33 0.84 3.16 8.03 1.17 33.11

MATERIALS

Clamp Base Polyetheretherketone (PEEK)

per MIL-P-46183

Overmolding Silicone Rubber per

ASTM-D-2000

PERFORMANCE

Temperature

Limits

Continuous: - 65°F to 350°F

Excursions: up 500°F

Flammability UL94, V0; FAR25.853

Application Example

Power Feeder Separator

PCL250028 28 1.70 4.32 1.46 3.71 3.57 9.07 2.29 5.82 0.33 0.84 2.91 7.39 1.06 30.16

Additional Information

CONNECTING PEOPLE & TECHNOLOGY

Other Products

High Performance Standoffs

 VICTREX PEEK Polymer

 Non-Conductive; Non-Corrosive

 Lightweight

Amphenol Pcd www.amphenolpcd.com email: info@amphenolpcd.com 978-624-3400

Product Customization

The High Performance P-Clamps and Omega Clamps can be customized to your specific

requirements.

Options include, but are not limited to:

 Fuel and High Temperature Applications

 Alternative Polymers and Rubbers Available

 Specific Diameter Requirements

 Accompanying Hardware

Mounting

Installation

A locking feature keeps

P-Clamp Open Wire bundle is

inserted

High Performance

P-Clamp

Surface Mounting Stacked Surface Mounting Standoff Mounting

VICTREX PEEK polymers make Amphenol Pcd High Performance P-Clamps and Omega Clamps not only

stronger, but lighter.

High performance, superior strength VICTREX PEEK polymer is designed to be chemical, radiation, smoke,

and abrasion resistant. Able to withstand temperature as high as 500° F (260° C), VICTREX PEEK enables

Amphenol Pcd to deliver High Performance P-Clamps and Omega Clamps that outperform traditional P-Clamps

and Saddle Clamps.

VICTREX PEEK Polymers provide high-performance, lightweight solutions to a wide variety of markets, including:

 Automotive and Transport

 Electronics

 Semiconductor and Displays

 Industrial

For full technical information regarding VICTREX PEEK Polymer visit the Victrex website at www.victrex.com

 Aerospace

 Defense

 Industrial

 Medical

 Food Processing

Second Locking Feature

keeps P-Clamp Closed

Rev. C: Jan, 2014

Amphenol Pcd

72 Cherry Hill Drive

Beverly, MA 01915 USA

Email: info@amphenolpcd.com

Tel: 978-624-3400

Luminus Series

 Environmentally sealed

 Secure, “snap-locking” mechanism

 Multiple sizes and configurations

 Rugged and lightweight

 Easy to use and maintain

 Uses standard MIL-C-39029 and

Stamped & Formed contacts

QuickClips

 Lightweight

 Customization available

 Strong and Durable

Screw inserted to complete

installation

Stacked Standoff Mounting