MOS FET Relays G3VM-21LR11 High-power, 0.9-A Switching with SSOP Package in a 20-V Load Voltage Model. * RoHS compliant Application Examples * * * * Semiconductor inspection tools Measurement devices Broadband systems Data loggers Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) Model 20 V Number per tape G3VM-21LR11 --- G3VM-21LR11(TR05) 500 G3VM-21LR11(TR) 1,500 Note: Use "TR05" instead of "TR" in the part number, to obtain reels with 500 pc/reel. (e.g., G3VM-21LR11(TR05)) Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR11 4.2 416 228 1.9 14 dia. 3.65 0.15 (0.3) 1.27 Note: The actual product is marked differently from the image shown here. 0.2 3.8 2.04 (0.46) 1.8 Note: A tolerance of 0.1 mm applies to all dimensions unless otherwise specified. Weight: 0.03 g Terminal Arrangement/Internal Connections (Top View) G3VM-21LR11 4 4 3 3 228 1 Pin 1 1 2 The actual product is marked differently from the image shown here. Beveled side is input side. 2 Pin 1 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR11 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR11 243 Absolute Maximum Ratings (Ta = 25C) Item Input Symbol Rating Unit Measurement Conditions LED forward current IF 50 mA LED forward current reduction rate IF/C -0.5 mA/C LED reverse voltage VR 5 V Connection temperature Tj 125 C VOFF 20 V Continuous load current (AC peak/DC) IO 900 mA ON current reduction rate IO/C -12 mA/C Connection temperature Tj 125 C Dielectric strength between input and VI-O output (See note 1.) 1,500 Vrms AC for 1 min Ambient operating temperature Ta -20 to +85 C With no icing or condensation Storage temperature Tstg -40 to +125 C With no icing or condensation Soldering temperature --- 260 Output Load voltage (AC peak/DC) Note: Ta 25C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta 50C C 10 s Electrical Characteristics (Ta = 25C) Item Input Symbol Minimum Typical Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 A VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- --- 3.0 mA IO = 100 mA RON --- 0.18 0.22 IF = 5 mA, IO = 900 mA, t < 1 s Current leakage when the relay is open ILEAK --- 0.2 1.0 nA VOFF = 20 V Capacity between terminals COFF --- 40 80 pF V = 0, f = 100 MHz, t<1s Capacity between I/O terminals CI-O --- 0.3 --- pF f = 1 MHz, Vs = 0 V Insulation resistance between I/O terminals RI-O 1,000 --- --- M VI-O = 500 VDC, RoH 60% Turn-ON time tON --- 0.3 2.0 ms Turn-OFF time tOFF --- 0.2 1.0 ms IF = 5 mA, RL = 200 , VDD = 10 V (See note 2.) Output Maximum resistance with output ON Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 20 V Operating LED forward current IF --- --- 20 mA Continuous load current (AC peak/DC) IO --- --- 900 mA Operating temperature -20 --- 65 C 244 Ta MOS FET Relays G3VM-21LR11 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 RL VDD VOUT IF VOUT 10% t ON 90% t OFF Engineering Data Continuous load current vs. Ambient temperature IO - Ta 60 50 40 30 20 10 0 20 40 60 80 100 1200 1000 800 600 400 200 0 -20 120 0 Continuous load current vs. On-state voltage IO - VON On-state resistance RON () 60 80 100 400 0 -400 -800 -0.1 0 0.1 1 0.5 0.3 I O = 900 mA I F = 5 mA t <1 s 0.35 0.8 0.30 0.25 0.20 0.15 0.10 0 -40 -20 0 20 40 Turn ON, Turn OFF time tON, tOFF (S) 1 t OFF 0.1 t ON 100 LED forward current IF (mA) 0.5 1 1.2 1.4 1.6 1.8 60 80 100 8 I O = 100 mA t <1 s 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 100 Ambient temperature Ta () Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta VDD= 10 V RL= 200 Ta = 25 10 3 Ambient temperature Ta () 10 1 5 Trigger LED forward current vs. Ambient temperature IFT - Ta 0.40 0.2 Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 0.01 10 LED forward voltage VF (V) 0.05 -1200 -0.2 30 0.1 0.6 120 Current leakage vs. Load voltage I LEAK - VOFF Current leakage ILEAK (pA) Continuous load current IO (mA) Ta = 25 I F = 5 mA On-state voltage VON (V) Turn ON, Turn OFF time tON, tOFF (S) 40 Ta = 25 C 50 On-state resistance vs. Ambient temperature RON - Ta 1200 800 20 100 Ambient temperature Ta Ambient temperature Ta () Trigger LED forward current I F T (mA) 0 -20 LED forward current vs. LED forward voltage IF - VF LED forward current I F (mA) 70 Continuous load current I O (mA) LED forward current IF (mA) LED forward current vs. Ambient temperature IF - Ta VDD = 10 V RL = 200 IF = 5 mA 0.4 t ON 0.3 t OFF 0.2 200 180 Ta = 25C 160 140 120 100 80 60 40 20 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta ( 0 5 10 15 20 25 Load voltage VOFF(v) Output terminal capacitance COFF/COFF(ov) vs. Load voltage COFFVOFF 1.0 Output terminal capacitance COFF/COFF(ov) Ta = 25 & 0.8 0.6 0.4 0.2 0 5 10 15 20 25 Load voltage VOFF(v) MOS FET Relays G3VM-21LR11 245 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-21LR11 Printed in USA