Revised July 2005 FSAV330 4 Channel 2:1 Video Switch General Description The Fairchild Video Switch FSAV330 is a quad single pole/ double throw high-speed CMOS TTL-compatible video switch. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When OE is LOW, the select pin connects the A Port to the selected B Port output. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Features O Replacement for the P15V330 O Wide bandwidth 300 MHz O 4: switch connection between two ports O Minimal propagation delay through the switch O Low lCC O Zero bounce in flow-through mode O Control inputs compatible with TTL level Applications * Set Top Boxes * Flat Panel Displays * CRT Displays * DVD - RW Ordering Code: Order Number FSAV330M Package Package Description Number M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow FSAV330QSC MQA16A 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide FSAV330QSCX_NL (Note 1) MQA16A Pb-Free 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide FSAV330MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide FSAV330MTCX_NL (Note 1) MTC16 Pb-Free 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Note 1: "_NL" indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only. (c) 2005 Fairchild Semiconductor Corporation DS500704 www.fairchildsemi.com FSAV330 4 Channel 2:1 Video Switch April 2002 FSAV330 Logic Diagram Connection Diagram Pin Descriptions Truth Table Pin Name Description OE Bus Switch Enable S Select Input S OE Function X H Disconnect L A B1 L A B2 A Bus A L B1-B2 Bus B H www.fairchildsemi.com 2 0.5V to 7.0V 0.5V to 7.0V 0.5V to 7.0V 50 mA Supply Voltage (VCC ) DC Switch Voltage (VS) DC Input Voltage (VIN) (Note 3) DC Input Diode Current (lIK) VIN 0V DC Output (IOUT) Sink Current DC VCC /GND Current (ICC /IGND) Storage Temperature Range (TSTG) Recommended Operating Conditions (Note 4) Power Supply Operating (VCC) 128 mA 4.0V to 5.5V Input Voltage (VIN) 0V to 5.5V Output Voltage (VOUT) 0V to 5.5V Input Rise and Fall Time (tr, tf) / 100 mA 65qC to 150 qC Switch Control Input 0 ns/V to 5 ns/V Switch I/O ESD 0 ns/V to DC 40 qC to 85 qC Free Air Operating Temperature (TA) Human Body Model 4000V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 3: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 4: Unused control inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol Parameter 40 qC to 85 qC TA VCC (V) Min 0 Typ (Note 5) Max Units 2.0 V Conditions Analog Signal Range 5 VIK Clamp Diode Voltage 4.5 VIH HIGH Level Input Voltage 4.0-5.5 VIL LOW Level Input Voltage 4.0-5.5 0.8 V II Input Leakage Current 5.5 r1.0 PA 0 d VIN d 5.5V IOFF OFF-STATE Leakage Current 5.5 r1.0 PA 0 d A, B d VCC RON Switch On Resistance 7 : 1.2 2.0 4.5 (Note 6) V IIN 18 mA V 3 VIN RI VIN 1.0V 75 :, ION 13 mA 2.0V 10 : ICC Quiescent Supply Current 5.5 3 PA VIN ' ICC Increase in ICC per Input 5.5 2.5 mA One Input at 3.4V 4.5 7 RI 75 :, ION 26 mA VCC or GND, IOUT 0 Other Inputs at VCC or GND Note 5: Typical values are at VCC 5.0V and TA 25qC Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B) pins. 3 www.fairchildsemi.com FSAV330 Absolute Maximum Ratings(Note 2) FSAV330 AC Electrical Characteristics 40 qC to 85qC, TA Symbol CL Parameter VCC Min tPZH, tPZL tPHZ, tPLZ 20 pF, RU Typ 75: VCC Max Min Units Number Max 5.2 5.7 Output Enable Time, OE to Bus A, B 5.1 5.6 Output Disable Time, Select to Bus B 5.2 5.5 ns 5.5 OE to Bus A, B 3 dB Bandwidth 5.5 300 58 Crosstalk VI 7V for tPZL VI OPEN for tPZH VI 7V for tPLZ ns VI OPEN for tPHZ MHz RL 150:, TA 25qC (Note 7) XTALK dB RIN RL Differential Gain DG 0.64 % RL f Differential Phase DP 0.1 Deg. RL f 60 Off Isolation OIRR Figure Conditions 4.0V Output Enable Time, Select to Bus B Output Disable Time, Output Enable Time BW RD 4.5 - 5.5V dB RL 10:, 150:, 10 MHz 150:, 3.58 MHz 150:, 3.58 MHz 150:, 10 MHz Note 7: This parameter is determined by device characterization but is not product tested. Capacitance Symbol Parameter CIN CI/O Typ Control Pin Input Capacitance A Port B Port Input/Output Capacitance Switch On Capacitance CON Note 8: TA (Note 8) 25qC, f 1 MHz, Capacitance is characterized but not tested. www.fairchildsemi.com 4 Max Units 3 pF 7 pF 5 pF 12 pF Conditions VCC 5.0V VCC, OE VCC 5.0V 5.0V, OE 0.0V Figures 1, 2 Figures 1, 2 FSAV330 AC Loading and Waveforms Note: Input driven by 50 : source terminated in 50 : Note: C L includes load and stray capacitance Note: Input PRR 1.0 MHz, tW 500 ns FIGURE 1. AC Test Circuit FIGURE 2. AC Waveforms 5 www.fairchildsemi.com FSAV330 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A www.fairchildsemi.com 6 FSAV330 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Package Number MQA16A 7 www.fairchildsemi.com FSAV330 4 Channel 2:1 Video Switch Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 Technology Description The Fairchild Switch family derives from and embodies Fairchild's proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8