FSAV330MTCX_NL - Fairchild Semiconductor

April 2002

Revised July 2005

FSAV330 4 Channel 2:1 Video Switch

FSAV330

4 Channel 2:1 V ideo Switch

General Descript ion

The Fairchild Video Switch FSAV330 is a quad single pole/

double throw high-speed CMOS TTL-compatible video

switch. The low On Resistance of the switch allows inputs

to be connected to outputs without adding propagation

delay or generating additional ground bounce noise.

When OE is LOW, the select pin connects the A Port to the

selected B Port output. When OE is HIGH, the switch is

OPEN and a high-im pedanc e state ex ists betwee n the tw o

ports.

Features

Replacement for the P15V330

Wide bandwidth 300 MHz

switch connection between two ports

Minimal propagation delay through the switch

Low lCC

Zero bounce in flow-through mode

Control inputs compatible with TTL level

Applications

• Set Top Boxes

• Flat Panel Displays

•CRT Displays

•DVD - RW

Ordering Code:

Device a l s o av ailable in Tape and R eel. Specify by appending suffix letter “X” to the ordering code.

Note 1: “_NL” indicates Pb-Fre e pac k age (per JE D EC J -STD-0 20B). Devic e availa ble in Tape and Reel only.

Order Number Package Packag e Descript ion

Number

FSAV330M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

FSAV330QSC MQA16A 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide

FSAV330QSCX_NL

(Note 1) MQA16A Pb-Free 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide

FSAV330MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

FSAV330MTCX_NL

(Note 1) MTC16 Pb-Free 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

www.fairchildsemi.com 2

FSAV330

Logic Diagram

Pin Descriptions

Connection Diagram

Truth Table

Pin Name Description

OE Bus Switch Enable

S Select Input

ABus A

B1–B2Bus B

SOE Function

X H Disconnect

LL A

HL A

3 www.fairchildsemi.com

FSAV330

Absolute Maximum Ratings(Note 2) Recommended Operating

Conditions (Note 4)

Note 2: The Absolute Maximum Ratings are those values beyond which

the safety of the device cannot be guaranteed. The device should not be

operated at these limits. The parametric values defined in the Electrical

Characteristics tables are not guaranteed at the absolute maximum rating.

The Re commend ed Oper ating Cond itions tables will de fine the c onditions

for actu al device operation.

Note 3: The input and output negative voltage ratings may be exceeded if

the in put and output diode cu rrent ratings are observ ed.

Note 4: Unused cont rol input s must be he ld HIG H or L OW. They ma y not

float.

DC Electrical Characteristics

Note 5: Typical valu es are at VCC

5.0V an d T A



Note 6: Measured by t he v oltage dr op betwee n A and B pin s a t the indicat ed curre nt th rough the s w it c h. On Resistan c e is determin ed by the lower of th e

voltages o n t he t w o (A or B) pin s.

Supply Voltage (VCC)



0.5V to



7.0V

DC Switch Vo ltage (VS)



0.5V to



7.0V

DC Input Voltage (VIN) (Note 3)



0.5V to



7.0V

DC Input Diode Current (lIK) VIN





50 mA

DC Output (IOUT) Sink Current 128 mA

DC VCC/GND Current (ICC/IGND)





100 mA

Storage Temperature Range (TSTG)



C to



150

ESD

Human Body Mod el 4000V

Power Sup ply Operat ing (VCC) 4.0V to 5.5V

Input Voltage ( VIN)0V to 5.5V

Output Voltage (VOUT)0V to 5.5V

Input Rise and Fall Time (tr, tf)

Switch Control Input 0 ns/V to 5 ns/V

Switch I/O 0 ns/V to DC

Free Air Ope rat i ng Temperatu re (T A)



C to



Symbol Parameter VCC

(V)



C to



CUnits Conditions

Min Typ

(Note 5) Max

Analog Signal Range 5 0 2.0 V

VIK Clamp Diode Voltage 4.5



1.2 V IIN



18 m A

VIH HIGH Level Input Voltage 4.0–5.5 2.0 V

VIL LOW Level Input Voltage 4.0–5.5 0.8 V

IIInput Leakage Current 5.5

1.0

VIN

5.5V

IOFF OFF-STATE Leakage Current 5.5

1.0

A, B

VCC

RON Switch On Resistance 4.5 3 7

VIN

1.0V

(Note 6) RI

, ION

13 mA

4.5 7 10

VIN

2.0V

, ION

26 mA

ICC Quiescent Supply Current 5.5 3

VCC or GND, IOUT

ICC Increase in ICC per Input 5.5 2.5 mA One Input at 3.4V

Other Inputs at VCC or GND

www.fairchildsemi.com 4

FSAV330

AC Electrical Characteristics

Note 7: This param et er is determined by device character iz at i on but is no t p roduct tes te d.

Cap acitance (Note 8)

Note 8: TA



C, f

1 MHz, Capacitance is characterized but not tested.

Symbol Parameter



C to



Units Conditions

20 pF, RU

Figure

VCC

4.5 – 5.5V VCC

4.0V Number

Min Typ Max Min Max

tPZH, tPZL Output Enable Time, Select to Bus B 5.2 5.7 ns VI

7V for tPZL Figures

1, 2

Output Enable Time, OE to Bus A, B 5.1 5.6 VI

OPEN for tPZH

tPHZ, tPLZ Output Disable Time, Select to Bus B 5.2 5.5 ns VI

7V for tPLZ Figures

1, 2

Output Disable Time, Output Enable Time 5.5 5.5 VI

OPEN for tPHZ

OE to Bus A, B



3 dB Bandwidth 300 MHz RL

150

(Note 7) TA

XTALK Crosstalk



58 dB RIN

150

, 10 MHz

DGDifferential Gain 0.64 % RL

150

3.58 MHz

DPDifferential Phase 0.1 Deg. RL

150

3.58 MHz

OIRR Off Isolation



60 dB RL

150

10 MHz

Symbol Parameter Typ Max Units Conditions

CIN Control Pin Input Capacitance 3 pF VCC

5.0V

CI/O A Port Input/Output Capacitance 7pF

VCC, OE

5.0V

B Port 5 pF

CON Switch On Capacitance 12 pF VCC

5.0V, OE

0.0V

5 www.fairchildsemi.com

FSAV330

AC Loading and Waveforms

Note: Input driven by 50

source terminated in 50

Note: CL includes load and stray capacitance

Note: Input PRR

1.0 MH z, t W

500 ns

FIGURE 1. AC Test Circuit

FIGURE 2. AC Waveforms

www.fairchildsemi.com 6

FSAV330

Physical Dimensions inches (millimeters) unless otherwise noted

16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

Package Number M16A

7 www.fairchildsemi.com

FSAV330

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide

Package Number MQA16A

www.fairchildsemi.com 8

FSAV330 4 Channel 2:1 Video Switc h

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Package Number MTC16

Technology Description

The Fairchild Switch fam ily derives from and embodies Fairchild’s pro ven switch tec hnology used fo r several years in its

74LVX3L384 (FST3384) bus switch product.

Fairchild does no t assume any responsibility for use of any circui try described, no circuit patent licenses are implied and

Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices o r syste ms are device s or systems

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instructions for use provided in the labeling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A criti cal com ponent in any com ponen t of a life su pport

device or system whose failure to perform can be rea-

sonabl y ex pect ed to cause the fa ilu re of the li fe su pp ort

device or system, or to affect its safety or effectiveness.