Web page Sample & buy Tools & software Support & FAQ Document 893 -1 High Frequency, High Current Power Inductors * Excellent Q factors - up to 230 at 400 MHz! * Current handling as high as 57 Amps * Inductance values from 22 to 257 nH Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper Ambient temperature -40C to +125C with Irms current Maximum part temperature +155C (ambient + temp rise). Storage temperature Component: -40C to +155C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Mean Time Between Failures (MTBF) 1 billion hours PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 1010VS-23NME_ 1010VS-46NME_ 1010VS-79NME_ 1010VS-111ME_ 1010VS-141ME_ 1212VS-22NME_ 1212VS-42NME_ 1212VS-66NME_ 1212VS-90NME_ 1212VS-111ME_ 2014VS-33NME_ 2014VS-66NME_ 2014VS-111ME_ 2014VS-151ME_ 2014VS-201ME_ 2014VS-251ME_ Inductance2 Q test 20% Q3 freq SRF typ4 (nH) typ (MHz) (MHz) 23.5 95 100 923 46.5 150 100 526 79.0 135 50 386 111 150 50 382 146 140 50 433 22.0 200 100 918 42.0 195 50 557 66.0 200 50 480 90.0 175 50 444 117 165 50 399 33 230 100 620 66 200 50 413 108 210 50 320 155 205 50 296 202 200 50 262 257 200 50 230 1. When ordering, please specify packaging code: Packaging: 2014VS-251MEC C = 7 machine-ready reel (Standard for 1010VS.) EIA481 embossed plastic tape. D = 13 machine-ready reel (Standard for 1212VS and 2014VS; optional, factory order only, not stocked for 1010VS.) EIA-481 embossed plastic tape. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C for 1010VS; D for 1212VS and 2014VS instead. DCR (mOhm) typmax 1.05 1.20 1.50 1.62 1.95 2.11 2.53 2.73 3.08 3.33 0.48 0.55 0.70 0.77 0.90 0.99 1.10 1.21 1.30 1.43 0.63 0.74 0.90 1.00 1.20 1.34 1.44 1.60 1.70 1.82 1.94 2.15 Irms (A)5 20C40C riserise 18.0 26.0 17.9 25.5 17.8 25.0 15.7 22.0 14.1 19.3 40.5 57.0 38.0 52.0 35.0 48.0 33.0 45.0 32.0 44.0 32.5 43.0 31.5 42.5 31.0 42.0 29.4 39.7 26.3 35.8 24.9 34.5 Weight (g) 0.49 0.65 0.82 0.98 1.23 2.20 2.70 3.20 3.70 4.20 1.60 2.30 3.10 3.60 4.40 5.00 2. Inductance measured at 1.0 MHz, 0.1 Vrms, 0 A using an Agilent/HP HP4291A impedance analyzer with an Agilent/HP 16193A test fixture or equivalents. 3. Q measured at the specified frequency using an Agilent/HP 4291A impedance analyzer or equivalent. 4. SRF measured using an Agilent/HP 8753 network analyzer or equivalent and a Coilcraft CCF1199 test fixture 5. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 893-1 Revised 10/05/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 893-2 High Frequency, High Current Power Inductors - 1010VS, 1212VS, 2014VS L vs Frequency 1000 Q vs Frequency 300 561RAU 1010VS 561RAU 1010VS 250 23.5 nH 225 100 79 nH 175 146 nH Q Factor Inductance (nH) 200 111 nH 79 nH 111 nH 150 125 146 nH 100 46.5 nH 46.5 nH 75 50 23.5 nH 25 10 1 100 10 0 1000 1 10 Frequency (MHz) 1000 100 1000 Frequency (MHz) 300 615RAU 1212VS 615RAU 1212VS 250 225 66 nH 22 nH 175 Q Factor Inductance (nH) 200 117 nH 100 90 nH 66 nH 42 nH 150 90 nH 125 117 nH 100 42 nH 75 50 22 nH 25 10 1 100 10 0 1000 1 10 Frequency (MHz) 1000 100 1000 Frequency (MHz) 300 643RAU 2014VS 643RAU 2014VS 250 257 nH 200 202 nH 175 Q Factor Inductance (nH) 225 155 nH 100 108 nH 33 nH 202 nH 150 66 nH 108 nH 155 nH 257 nH 125 100 66 nH 75 33 nH 50 25 10 1 10 100 1000 0 1 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 10 100 1000 Frequency (MHz) Document 893-2 Revised 10/05/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 893-3 High Frequency, High Current Power Inductors - 1010VS, 1212VS, 2014VS 1010VS 2014VS 0.100 2,54 0.290 7,37 3 0.375 9,53 0.394 max 10,0 XXX X XXX X 0.311 7,91 Internal code Dash number Recommended Land Pattern 0.394 max 10,0 Dash number 0.004 / 0,10 Internal code 0.069 1,75 0.336 0.01 8,55 0,25 Part number Height inches mm 1010VS-23N 1010VS-46N 1010VS-79N 1010VS-111 1010VS-141 0.142 0.161 0.189 0.220 0.240 3,60 4,10 4,80 5,60 6,10 Weight (g) 0.49 0.65 0.82 0.98 1.23 Height (See table) 0.004 / 0,10 0.296 min 7,52 Part number 2014VS-33N 2014VS-66N 2014VS-111 2014VS-151 2014VS-201 2014VS-251 1212VS 0.130 3,30 0.515 16,08 2 3 0.348 8,84 0.13 3,30 Recommended Land Pattern Height (See table) 0.218 min 5,56 0.004 / 0,10 0.10 2,54 0.357 0.040 9,07 1,02 All dimensions are in 1 0.407 10,34 Dash Internal number code 0.453 max 11,5 inches . mm Part number Height inches mm 1212VS-22N 1212VS-42N 1212VS-66N 1212VS-90N 1212VS-111 0.260 0.299 0.346 0.409 0.445 6,60 7,60 8,80 10,4 11,3 Weight (g) 2.2 2.7 3.2 3.7 4.2 2 Recommended Land Pattern 0.10 2,54 0.472 max 12,0 0.185 4,70 0.150 3,81 0.535 max 13,60 XXX X 0.410 10,41 1 Height (See table) 0.211 min 5,36 0.205 5,21 0.643 16,33 0.770 max 19,56 0.160 4,06 Height Weight inches mm (g) 0.236 5,99 1.6 0.279 7,09 2.3 0.327 8,31 3.1 0.362 9,19 3.6 0.409 10,4 4.4 0.449 11,4 5.0 Caution: Terminal 3 is provided for mounting stability only. This terminal is connected to the winding of the inductor and must not be connected to ground or any circuitry. 0.10 2,54 Packaging 1010VS-23N 250/7 reel; ; 1000/13 reel; 3.81 mm pocket depth 1010VS-46N 250/7 reel; ; 900/13 reel; 4.32 mm pocket depth 1010VS-79N 200/7 reel; ; 800/13 reel; 5.05 mm pocket depth Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing 1010VS-111 175/7 reel; ; 700/13 reel; 5.84 mm pocket depth 1010VS-141 150/7 reel; ; 600/13 reel; 6.35 mm pocket depth Plastic tape: 24 mm wide, 0.40 mm thick, 16 mm pocket spacing 1212VS-22N 450/13 reel; 8.86 mm pocket depth 1212VS-42N 400/13 reel; 7.87 mm pocket depth 1212VS-66N 350/13 reel; 9.02 mm pocket depth 1212VS-90N 300/13 reel; 10.67 mm pocket depth 1212VS-111 250/13 reel; 11.68 mm pocket depth Plastic tape: 24 mm wide, 0.50 mm thick, 20 mm pocket spacing 2014VS-33N 500/13 reel; 6,22 mm pocket depth 2014VS-66N 450/13 reel; 7,37 mm pocket depth 2014VS-111 400/13 reel; 8,56 mm pocket depth 2014VS-151 350/13 reel; 9,45 mm pocket depth 2014VS-201 300/13 reel; 10,67 mm pocket depth 2014VS-251 250/13 reel; 11,68 mm pocket depth Plastic tape: 44 mm wide, 0.50 mm thick, 20 mm pocket spacing US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 893-3 Revised 10/05/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 1212VS-111MEB 1010VS-111MEB 2014VS-111MEB 1212VS-111MED 1212VS-66NMED 1010VS-46NMEC 2014VS-251MEB 2014VS-251MED 1212VS-66NMEB 1010VS-111MEC 2014VS-111MED 1010VS-23NMEB 2014VS-151MEB 2014VS-66NMED 1010VS-23NMEC 2014VS-66NMEB 1212VS-22NMED 1010VS-46NMEB 1212VS-22NMEB 1010VS-79NMEC 2014VS-201MED 1212VS-42NMED 1010VS-141MEB 1212VS-42NMEB 2014VS-33NMEB 1212VS-90NMEB 2014VS-151MED 2014VS-201MEB 1010VS-141MEC 1010VS-79NMEB 1212VS-90NMED 2014VS-33NMED