PhotoMOS RELAYS RF (Radio Frequency) Type [1-Channel (Form A) Type] --Low On resistance-- FEATURES 8.80.05 .346.002 1. PhotoMOS relay with high response speed, low leakage current and low On resistance 2. Low capacitance between output terminals ensures high response speed: The capacitance between output terminals is small, typically 10 pF. This enables for a fast operation speed of 200 s. 3. High sensitivity and low On resistance Maximum 0.3 A of load current can be controlled with input current of 5 mA. The 10 (AQV225N) On resistance is less than our conventional models. With no metallic contacts, the PhotoMOS relay has stable switching characteristics. 6.40.05 .252.002 3.90.2 .154.008 6.40.05 .252.002 3.60.2 .142.008 8.80.05 .346.002 mm inch 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, whereas the PhotoMOS relay has only 30 pA even with the rated load voltage of 80 V (AQV225N). 5. Controls low-level analog signals PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 6. Low terminals electromotive force (approx. 1 V) TYPICAL APPLICATIONS * Measuring devices * Scanner, IC checker, Board tester TYPES Part No. Output rating* Type AC/DC type Load voltage Load current Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style 80 V 150 mA AQV225N AQV225NA AQV225NAX AQV225NAZ 200 V 70 mA AQV227N AQV227NA AQV227NAX AQV227NAZ 400 V 50 mA AQV224N AQV224NA AQV224NAX AQV224NAZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Type of Symbol connection IF VR IFP Pin VL A IL B C AQV225N(A) AQV227N(A) AQV224N(A) 80 V 0.15 A 0.20 A 0.30 A 50 mA 3V 1A 75 mW 200 V 0.07 A 0.08 A 0.10 A 400 V 0.05 A 0.06 A 0.08 A 0.45 A 0.21 A 0.15 A f = 100 Hz, Duty factor = 0.1% Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 360 mW 410 mW 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F Temperature limits Remarks A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperatures 559 AQV22N 2. Electrical characteristics (Ambient temperature: 25C 77F) Type of Symbol connection Item Typical LED operate current Input Maximum Minimum Typical Typical Maximum LED turn off current LED dropout voltage IFon -- IFoff -- VF -- Ron A Ron B Ron C Cout -- Typical Maximum Typical On resistance Maximum Typical Output Maximum AQV225N(A) AQV227N(A) 0.90 mA 3.0 mA 0.4 mA 0.85 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V Turn on time* Transfer characteristics IL = Max. IF = 5 mA 30 70 10 50 100 3.5 16 55 5 25 70 1.8 8 28 2.5 12.5 35 15 pF Typical Maximum Typical Maximum Switching speed Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation resisMinimum tance 30 pA IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz 10 pF Maximum Remarks IL = Max. 7.0 Typical Output capacitance Off state leakage current AQV224N(A) 30 pA 10 nA 90 pA IF = 0 VL = Max. ILeak -- Ton -- 0.20 ms 0.5 ms IF = 5 mA IL = Max. Toff -- 0.08 ms 0.2 ms IF = 5 mA IL = Max. Ciso -- 0.8 pF 1.5 pF f = 1 MHz VB = 0 Riso -- 1,000 M 500 V DC Note: Recommendable LED forward current IF = 5mA *Turn on/Turn off time Input 90% Output 10% Ton Toff For Dimensions, see Page 441. For Schematic and Wiring Diagrams, see Page 444. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 12.0 100 Load currnt, mA 100 AQV227N On resistance, 10.0 AQV225N AQV225N 8.0 6.0 On resistance, 150 AQV224N 80 60 4.0 40 2.0 20 AQV227N 50 AQV224N 0 -40 -20 560 0 20 40 60 80 85100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C AQV22N 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics Sample: AQV225N, AQV227N, AQV224N; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV225N, AQV227N, AQV224N; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: AQV225N, AQV227N, AQV224N; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 0.8 0.4 0.6 AQV225N 0.4 AQV227N 0.3 0.2 AQV225N AQV224N 0.2 5 LED operate current, mA 1.0 Turn off time, ms Turn on time, ms 3. Turn on time vs. ambient temperature characteristics 0.1 4 3 AQV225N 2 AQV227N 1 AQV224N AQV224N AQV227N 0 -40 -20 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 80 85 Ambient temperature, C 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Sample: AQV225N, AQV227N, AQV224N; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 4 3 2 AQV225N 1 0 AQV224N -40 -20 1.4 -4 1.2 0 -40 -20 -3 -2 AQV227N AQV224N 50 -1 1 2 3 4 Voltage, V -50 -100 -150 0 20 40 60 80 85 Ambient temperature, C 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 10-6 1.4 Off state leakage current, A AQV225N 100 50mA 30mA 20mA 10mA 5mA 1.1 80 85 0 20 40 60 Ambient temperature, C 9. Off state leakage current 150 1.3 1.0 AQV227N Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Current, mA 1.5 LED dropout voltage, V LED turn off current, mA 5 0.22 AQV224N 1.0 0.8 AQV225N 0.6 10-12 0.14 0.10 AQV225N AQV224N AQV227N 200 300 Load voltage, V 0 400 0.06 AQV224N*AQV227N 0.2 100 0.18 0.4 AQV227N AQV225N 0 Turn on time, ms 10-9 Turn on time, ms 1.2 0 10 0 20 30 40 50 60 LED forward current, mA 0 10 20 30 40 50 60 LED forward current, mA 12. Applied voltage vs. output capacitance characteristics 13. Isolation characteristics (50 impedance) 14. Insertion loss characteristics (50 impedance) Measured portion: between terminals 4 and 6; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 6 100 Insertion loss, dB 5 10 Isolation, dB Output capacitance, pF 12 8 6 4 AQV225N AQV227N 2 0 9/1/2000 AQV224N 0 20 40 60 80 100 Applied voltage, V 80 60 AQV224N 40 AQV224N 4 3 AQV227N 2 AQV225N*AQV227N 20 0 1 104 105 106 Frequency, HZ 107 0 AQV225N 10 4 105 106 Frequency, HZ 107 All Rights Reserved, (c) Copyright Matsushita Electric Works, 561 Ltd. Go To Online Catalog