D-Sub
MILITARY QUALITY,
CRIMP REMOVABLE CONTACT
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS
Positronic Industries
connectpositronic.com
27 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
RD SERIES
RHAPSO-D SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator: Glass filled DAP per ASTM-D-5948,
SDG-F, UL 94V-0, green color.
Contacts:
Signal: Male contacts – precision machined
brass. Female contacts – precision
machined high tensile copper alloy with
stainless steel shroud or open entry
Robi-D design.
Contact Plating: Military performance – 0.000050 inch [1.27
microns] gold over copper plate. Industrial
performance – gold flash over nickel plate.
Other finishes available upon request.
Shells: Steel with tin plate; zinc and cadmium
plate with chromate seal, stainless steel,
passivated. Other materials and finishes
available upon request.
Mounting Spacers: Brass, zinc plate with chromate seal.
Jackscrew Systems: Steel with zinc plate and chromate seal,
or clear zinc plate.
Vibration Lock Systems: Slide lock and lock tabs, steel with nick-
el plate.
Hoods: Thermoplastic UL 94V-0. Composite,
brass or steel with zinc plate and chro-
mate seal.
Non-magnetic versions are available, contact Technical Sales.
CLIMATIC CHARACTERISTICS:
Temperature Range: -55°C to +125°C.
Damp Heat, Steady State: 21 days.
MECHANICAL CHARACTERISTICS:
Removable Contacts: Insert contact to rear face of insulator
and release from rear face of insulator.
Size 20 contact, male – 0.040 inch
[1.02mm] diameter; female – closed
entry design with stainless steel shroud
or open entry Robi-D design.
Contact Retention
In Insulator: 9 lbs. [40 N].
Contact Terminations: Closed barrel crimp, wire sizes 18 AWG
[1.0mm2] through 30 AWG [0.05mm2].
Shells: Male shells may be dimpled for EMI/ESD
ground paths.
Polarization: Trapezoidally shaped shells and polar-
ized jackscrews.
Locking Systems: Jackscrews and vibration locking sys-
tems.
Mechanical Operations: 1000 operations minimum per IEC 512-5
for closed entry female contact.
500 operations per IEC 512-5 for “Robi-D
Open Entry” design female contact.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating: 7.5 amperes nominal.
Initial Contact Resistance: 0.005 ohms maximum.
Proof Voltage: 1000 V r.m.s.
Insulator Resistance: 5 G ohms.
Clearance and Creepage
Distance [minimum]: 0.039 inch [1.0mm].
Working Voltage: 300 V r.m.s.
THERMOCOUPLE CONTACTS:
Size 20 crimp contacts are available, see page 30 for details.
PCB mount contacts are available in HDC series, see page 21 for
details.
Size 20 Signal and
Thermocouple Contacts,
Crimp Removable
Military/Industrial
Quality Connectors
IEC Publication 807-3
Performance Level One
MIL-DTL-24308 and SAE AS 39029
U.L. Recognized CSA Recognized
File #E49351 File #LR54219
Telecommunication
U.L. File #14098
Rhapso-D Series connectors are Military/Industrial quality rectangu-
lar connectors designed for use in sheltered, mildly corrosive environ-
ments having a wide range of temperature, pressure and humidity
changes. These crimp removable contact connectors are qualified to
MIL-DTL-24308 and SAE AS 39029, and will meet the performance
requirements of IEC 807-3, Performance Level One.
Rhapso-D Series connectors utilize precision machined contacts
with closed barrel, crimp terminations. The female contact features a
rugged closed entry design contact with stainless steel shroud. A
“Robi-D Open Entry” female contact is also available.
Six standard connector variants are offered in arrangements of 9,
15, 25, 29, 37 and 50 contacts. Rhapso-D Series connectors are mate-
able and compatible with all D-Subminiature connectors conforming to
MIL-DTL-24308, IEC 807-2 and IEC 807-3.
A wide assortment of cable support hoods and locking systems is
available from stock.
Rhapso-D Series connectors conform to EIA RS 232 and RS 449,
and CCITT X.24 interface connection requirements.
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
RoHS
RoHS
Compliant
For RoHS options
see page 31.
NEW!
RD SERIES
28
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D-Sub
MILITARY QUALITY,
CRIMP REMOVABLE CONTACT
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Positronic Industries
connectpositronic.com
222120
312
2423 26 2725 3028 29 32 3331
654 87 12111091413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
761098
45 4644 49
47 48 50
333028 29 3231
131211 161514 17
9876
15423
1514
121110913
32
1876
54
14
12
252423
22212018
17 19
1615
8
76
543 131210
911
21
11 12
20
21
26
1716
242322
13 14 15
25 2927 28
19
18
76543 1098
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
RD 9 RD 15 RD 25
RD 50RD 37
RD 29
CONNECTOR
VARIANT SIZES
A
±0.015
[0.38]
B
±0.005
[0.13]
B1
±0.005
[0.13]
C
±0.005
[0.13]
D
±0.005
[0.13]
D1
±0.005
[0.13]
E
±0.015
[0.38]
G
±0.010
[0.25]
H
±0.010
[0.25]
K
±0.005
[0.13]
M
±0.010
[0.25]
RD 9 M 1.213
[30.81]
0.666
[16.92]
0.984
[24.99]
0.329
[8.36]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
RD 9 F 1.213
[30.81]
0.643
[16.33]
0.984
[24.99]
0.311
[7.90]
0.494
[12.55]
0.759
[19.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
RD 15 M 1.541
[39.14]
0.994
[25.25]
1.312
[33.32]
0.329
[8.36]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.233
[5.92]
0.422
[10.72]
RD 15 F 1.541
[39.14]
0.971
[24.66]
1.312
[33.32]
0.311
[7.90]
0.494
[12.55]
1.083
[27.51]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
RD 25 M 2.088
[53.04]
1.534
[38.96]
1.852
[47.04]
0.329
[8.36]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
RD 25 F 2.088
[53.04]
1.511
[38.38]
1.852
[47.04]
0.311
[7.90]
0.494
[12.55]
1.625
[41.28]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
RD 29 M 1.770
[44.96]
1.274
[32.36]
1.534
[38.96]
0.450
[11.43]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.217
[5.51]
0.426
[10.82]
RD 29 F 1.770
[44.96]
1.251
[31.78]
1.534
[38.96]
0.431
[10.95]
0.605
[15.37]
1.322
[33.58]
0.539
[13.69]
0.237
[6.02]
0.429
[10.90]
RD 37 M 2.729
[69.32]
2.182
[55.42]
2.500
[63.50]
0.329
[8.36]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.230
[5.84]
0.426
[10.82]
RD 37 F 2.729
[69.32]
2.159
[54.84]
2.500
[63.50]
0.311
[7.90]
0.494
[12.55]
2.272
[57.71]
0.422
[10.72]
0.243
[6.17]
0.429
[10.90]
RD 50 M 2.635
[66.93]
2.079
[52.81]
2.406
[61.11]
0.441
[11.20]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.230
[5.84]
0.426
[10.82]
RD 50 F 2.635
[66.93]
2.064
[52.43]
2.406
[61.11]
0.423
[10.74]
0.605
[15.37]
2.178
[55.32]
0.534
[13.56]
0.243
[6.17]
0.429
[10.90]
K
M
G
H
0.375 [9.53]
Max.
10° Typ.
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
E
B1
B
A
C
D1 D
two places (02 option)
Ø0.154 [3.91] Mounting hole,
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
for stainless steel shell (0 option) [
Mounting hole, two places
Total diametral float
0.032 [0.81] Ø0.086
+0.005
-0.000
0.120±0.010 [3.08±0.25]
+0.13
-0.00
Ø2.18 ]
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS (F)
OPTIONAL SHELL ASSEMBLY (0, 02)
D-Sub
MILITARY QUALITY,
CRIMP REMOVABLE CONTACT
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS
Positronic Industries
connectpositronic.com
29 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
RD SERIES
REMOVABLE CRIMP CONTACTS
CODE 14
20/22/24 AWG CONTACTS
20/22/24 AWG [0.5/0.3/0.25 mm2]
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
FEMALE CONTACT
“ROBI-D OPEN ENTRY” DESIGN PART NUMBER WIRE SIZE
AWG/[mm2]A
FC6120D 20 / 22 / 24
[0.5/0.3/0.25]
0.538
[13.67]
0.045
[1.14]
0.066
[1.68]
MATERIAL: Phosphor bronze.
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76 µ] gold over nickel by adding “-14”
suffix onto part number. Example: FC6120D-14
0.000050 inch [1.27µ] gold over nickel by adding “-15”
suffix onto part number. Example: FC6120D-15
REMOVABLE CRIMP CONTACTS
CODE 1 AND 12
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
CLOSED CRIMP BARREL
MALE CONTACTFEMALE CONTACT
“CLOSED ENTRY” DESIGN
PART NUMBER WIRE SIZE
AWG/[mm2]BØC
FC6020D 20 / 22 / 24
[0.5/0.3/0.25]
0.538
[13.67]
0.045
[1.14]
0.066
[1.68]
FC6026D 26 / 28 / 30
[0.12/0.08/0.05]
0.538
[13.67]
0.027
[0.69]
0.066
[1.68]
PART NUMBER WIRE SIZE
AWG/[mm2]BØC
MC6020D 20 / 22 / 24
[0.5/0.3/0.25]
0.550
[13.97]
0.045
[1.14]
0.066
[1.68]
MC6026D 26 / 28 / 30
[0.12/0.08/0.05]
0.550
[13.97]
0.027
[0.69]
0.066
[1.68]
*M39029/63-368 20 / 22 / 24
[0.5/0.3/0.25]
0.538
[13.67]
0.045
[1.14]
0.066
[1.68] *M39029/64-369 20 / 22 / 24
[0.5/0.3/0.25]
0.550
[13.97]
0.045
[1.14]
0.066
[1.68]
Note: *C60**D contacts can be used in the SD series.
For crimping information and crimp tools, see Application Tools section, pages 69-72.
For crimping information and crimp tools,
see Application Tools section, pages 69-72.
MATERIAL:
MALE CONTACT: Brass.
FEMALE CONTACT: Leaded nickel copper.
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76 µ] gold over nickel by adding “-14”
suffix onto part number. Example: FC6020D-14
0.000050 inch [1.27µ] gold over nickel by adding “-15”
suffix onto part number. Example: MC6026D-15
*MILITARY SPECIFICATION CONTACTS:
STANDARD FINISH: 0.000050 inch [1.27µ]
gold over copper
MALE CONTACT COLOR CODE:
ORANGE/BLUE/WHITE
FEMALE CONTACT COLOR CODE:
ORANGE/BLUE/GRAY
MALE CONTACT FEMALE CONTACT
Dimensionally equivalent to M39029/64-369 ††Dimensionally equivalent to M39029/63-368
TYPE MATERIAL MALE
PART NUMBER
FEMALE
PART NUMBER
COLOR
CODE
WIRE SIZE
AWG [mm2]ØB
K
CHROMEL (+)
MC6020DCHFC6020DCH††
WHITE
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DCH FC6026DCH 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
ALUMEL (-)
MC6020DALFC6020DAL††
GREEN
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DAL FC6026DAL 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
T
COPPER (+)
MC6020DCUFC6020DCU††
RED
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DCU FC6026DCU 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
CONSTANTAN (-)
MC6020DCOFC6020DCO††
YELLOW
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DCO FC6026DCO 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
E
CHROMEL (+)
MC6020DCHFC6020DCH††
WHITE
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DCH FC6026DCH 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
CONSTANTAN (-)
MC6020DCOFC6020DCO††
YELLOW
20 / 22 / 24
[0.5 / 0.3 / 0.25]
0.045
[1.14]
MC6026DCO FC6026DCO 26 / 28 / 30
[0.12 / 0.08 / 0.05]
0.027
[0.69]
RD SERIES
30
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D-Sub
MILITARY QUALITY,
CRIMP REMOVABLE CONTACT
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Positronic Industries
connectpositronic.com
Chromel®and Alumel®
are registered trademarks
of Hoskins Manufacturing
Company.
For more information on the avail-
ability of Type J thermocouple
contacts, and information about
thermocouple contacts with PCB
solder termination, please
contact Technical Sales.
Part Number: FC6018D
For crimping information and crimp tools,
see Application Tools section, pages 69-72.
Part Number: MC6018D
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
MALE CONTACT
For crimping information and
crimp tools, see Application
Tools section, pages 69-72.
REMOVABLE CRIMP CONTACTS
18 AWG CRIMP CONTACTS
18 AWG [1.0mm2]
CONTACTS MUST BE ORDERED SEPARATELY.
MATERIAL:
MALE CONTACT: Brass.
FEMALE CONTACT: Phosphor bronze.
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76 µ] gold over nickel by adding “-14”
suffix onto part number. Example: FC6018D-14
0.000050 inch [1.27µ] gold over nickel by adding “-15”
suffix onto part number. Example: MC6018D-15
THERMOCOUPLE CONTACTS
CONTACTS MUST BE ORDERED SEPARATELY.
D-Sub
MILITARY QUALITY,
CRIMP REMOVABLE CONTACT
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS
Positronic Industries
connectpositronic.com
31 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
RD SERIES
*For additional information on accessories listed in steps 5,
6 and 7, see Accessory Catalog.
For crimping information and crimp tools,
see Application Tools section, pages 69-72.
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
M - Male
F-Female
123456789
RD 25 F 1 0 J VL 0/AA
10
-50
STEP 1 - BASIC SERIES
RD Series.
STEP 10 - SPECIAL OPTIONS
-14 – 0.000030 [0.76µ] gold over
nickel.
-15 – 0.000050 [1.27µ] gold over
nickel.
-50 – 0.000050 [1.27µ] gold over
copper.
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
*STEP 6 - HOODS
0 - None.
J - Hood, Top Opening, Plastic.
L - Hood, Side Opening, Plastic.
Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.
Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.
Z - Hood, Top or Side Opening, Robust Extended Height,
Composite and Plastic with Rotating Male Jackscrews.
Available in size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and
50 only.
G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and
size 50 only.
W - Hood, Top or Side Opening, Plastic. Available in size 9, 15,
and 25 only.
*STEP 5 - MOUNTING STYLE
0 - Mounting Hole, 0.120 [3.05] Ø.
02 - Mounting Hole, 0.154 [3.91] Ø.
F - Float Mounts, Universal.
S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.
S5 - Swaged Locknut, 4-40 Threads.
STEP 4 - CONTACT TERMINATION TYPE
0 - Ordered Without Contacts.
1 - Crimp, 20 AWG–24 AWG [0.5mm2–0.25mm2].
12 - Crimp, 26 AWG–30 AWG [0.12mm2–0.08mm2].
14 - Crimp, 20 AWG–24 AWG [0.5mm2–0.25mm2]
“Robi-D Open Entry” female contact.
STEP 2 - CONNECTOR VARIANTS
9, 15, 25, 29, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
RoHS
RoHS
Compliant
*STEP 7 -LOCKING AND POLARIZING SYSTEMS
0 - None.
V3 - Lock Tab, connector front panel mounted.
V5 - Lock Tab, connector rear panel mounted.
VL - Lock Lever, used with Hoods Only.
T - Fixed Female Jackscrews.
T2 - Fixed Female Jackscrews.
T6 - Fixed Male and Female Polarized Jackscrews.
E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.
E3 - Rotating Male with internal hex for 3/32 hex drives
E6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental
legislation is not required, this step will not
be used. Example: SD25F3S60T6X
NOTE: Once you have made a connector selection, contact
Technical Sales if you would like to receive a drawing in DXF, PDF
format or a 3-dimensional IGES, STEP, or SOLIDWORKS file.
SK Drawing 3-dimensional model
STEP 8 -SHELL OPTIONS
0 - Zinc Plated with Chromate Seal.
S - Stainless Steel.
X - Tin Plated.
Z - Tin Plated and Dimpled (male connectors only).
C - Cadmium plated with Chromate Seal.