SMA5101
No. A1839-1/5
Features
• Wide band : up to Ku band • High conversion gain : --0.5dB (@450MHz)
• Low distortion : IIP3=20dBm (@ICC > 11mA) • Low voltage available : 1.2V and above
• SMT, Ultra small package : 2.0×2.1×0.85mm • Halogen free compliance
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO 8V
Collector-to-Emitter Voltage VCEO 6V
Emitter-to-Base Voltage VEBO 2V
Collector Current ICC 50 mA
Max Power Dissipation PC280 mW
Operating Temperature Topr --40 to +85
°C
Storage Temperature Tstg --55 to +150
°C
Package Dimensions
unit : mm (typ)
7022A-020
O0610AM TK IM TC-00002495
SANYO Semiconductors
DATA SHEET
SMA5101
Silicon Monolithic Linear IC
RF Double Balanced Mixer IC
http://semicon.sanyo.com/en/network
Ordering number : ENA1839
Product & Package Information
• Package : MCPH6
• JEITA, JEDEC : SC-88, SOT363
• Minimum Packing Quantity : 3,000pcs/real
Packing Type: TL Marking
Equivalent Circuit
1 : Base2
2 : Collector1
3 : Collector2
4 : Emitter2
5 : Emitter1
6 : Base1
SANYO : MCPH6
2.0
0.25
1.6
2.1
0.25
0.85
0.3
0.65
0.15
0 to 0.02
0.07
654
123
654
123 LD
LOT No.
LOT No.
TL
1
6
2
3
45
IT15506
SMA5101
No. A1839-2/5
Recommended Operating Conditions at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Supply Voltage
VC1E1 1.236V
VC2E1 1.236V
VC1E2 1.236V
VC2E2 1.236V
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Collector Cutoff Current
IC1B1O VC1B1=5V 1 μA
IC2B1O VC2B1=5V 1 μA
IC1B2O VC1B2=5V 1 μA
IC2B2O VC2B2=5V 1 μA
Emitter Cutoff Current
IE1B1O VE1B1=1V 1 μA
IE2B1O VE2B1=1V 1 μA
IE1B2O VE1B2=1V 1 μA
IE2B2O VE2B2=1V 1 μA
DC Current Gain
hFE1V
C1E1=1V, IC1E1=3mA 20 120
hFE2V
C2E1=1V, IC2E1=3mA 20 120
hFE3V
C1E2=1V, IC1E2=3mA 20 120
hFE4V
C2E2=1V, IC2E2=3mA 20 120
Conversion Gain *1 Gc
VCC=5V, ICC=6mA,
f(RF)=450MHz, f(LO)=500MHz,
P(RF)=--15dBm, P(LO)=--6dBm
--0.5 dB
Input Intercept Point *1 IIP3
VCC=5V, ICC=6mA,
f(RF1)=450MHz, f(RF2)=451MHz,
f(LO)=500MHz,
P(RF1)=P(RF2)=--15dBm, P(LO)=--6dBm
15 dBm
*1 : On evaluation board
Measurement Circuit
0.1μF0.1μF
0.1μF
0.1μF
10kΩ
Balun
BalunBalun
IF
SMA5101
VB
VCC
LO
RF
LD
IT15507
SMA5101
No. A1839-3/5
Evaluation Board
Circuit Example (Self Bias)
LO
VB
VCC
IF
RF
IT15508
T1
T2
T3
C1
C2
C3
C4
R1 R2
IC
IC : SMA5101
T1 to T3 : Balun
C1 to C4 : 0.1μF
R1 : 10kΩ
R2 : 0Ω (short)
0.1μF
0.1μF
0.1μF
0.1μF
Balun
BalunBalun
IF
SMA5101
VCC
Rbias
LO
RF
LD
IT15509
SMA5101
No. A1839-4/5
P1dB -- ICC
P1dB -- dBm
Collector Current, ICC -- mA
IIP3 -- ICC
IIP3 -- dBm
Collector Current, ICC -- mA
Gc -- ICC
Gc -- dB
Collector Current, ICC -- mA
IT15978
0 5 10 15 2520
25
15
10
5
20
0
--3dBm
P(LO)= --6dBm
0dBm
VCC=5V
f(RF1)=450MHz
f(RF2)=451MHz
f(LO)=500MHz
P(RF)= --15dBm
0 5 10 15 2520
IT15976
10
0
--5
5
--10
--6dBm
VCC=5V
f(RF)=450MHz
f(LO)=500MHz
P(LO)= --3dBm
0dBm
0 5 10 15 2520
IT15977
10
0
--5
5
--10
--6dBm
VCC=5V
f(RF)=450MHz
f(LO)=500MHz
P(RF)= --15dBm
P(LO)= --3dBm
0dBm
SMA5101
No. A1839-5/5PS
This catalog provides information as of October, 2010. Specifi cations and information herein are subject
to change without notice.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
