Commercial CCR-33 Miniature DC-18GHz SPDT Switch Latching The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors. The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33 series switch is interchangeable with a variety of switches. Specifications RF Contacts: Break before make Actuator Voltage (VDC) 20O C 12 Current (mA) 140 115 65 Switching Time: 10 msec max Connectors: SMA (f) Weight: 1.65 oz. max 15 28 Temperature Range: -40O C to +65O C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available Typical Contact Life: 5 Million Cycles Insertion Loss Repeatability (1 Million Cycles): DC to 6 GHz: 0.05 dB DC to 20 GHz: 0.1 dB RF Power Handling Typical Performance 3000 Power CW (Watts) 400 200 Sta nda rd S MA Co nne Return Loss 800 cto rs 15 80 25 40 10 0.1 1.0 4.0 Frequency GHz 10 0.01 18 Frequency GHz Isolation dB 0.0 0.4 VSWR (max) Insertion Loss (min) Isolation (max) DC-6 GHz 6-12 GHz 12-18 GHz 1.25:1 0.20 dB 70.0 dB 1.40:1 0.40 dB 60.0 dB 60 IL dB Specifications 18.0 70 1.50:1 0.50 dB 60.0 dB 80 90 0.01 Specifications subject to change without notice. Frequency GHz 18.0 www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007 Commercial CCR-33 Miniature DC-18GHz SPDT Switch Latching Indicators TTL Analog H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body Part Numbering System for CCR-33 (Latching) CCR-33 S 6 C - N Series Options Connectors Actuator Type Actuator Voltage Connector S: SMA Female # Actuator Voltage 6: 28Vdc Latching # 7: 15Vdc Latching # 8: 12Vdc Latching # For other options contact Factory Actuator Type O: No Indicator Contacts # C: Indicator Contacts # D: Self Cutoff Only E: Indicators and Self Cutoff Specifications subject to change without notice. Options T: TTL Drivers with Diodes N: Narrow Body # R: Positive + Common #: Stock item subject to prior sale www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007