P r o d u c t I n n o v a t i o n F r o m PA241M
PA241MU 1
PA241M
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent Current IQ 25°C ±150V VIN = 0, AV = 100 2.5 mA
1 Input Offset Voltage VOS 25°C ±150V VIN = 0, AV = 100 30 mV
1 Input Offset Voltage VOS 25°C ±50V VIN = 0, AV = 100 30 mV
1 Input Offset Voltage VOS 25°C ±175V VIN = 0, AV = 100 30 mV
1 Input Bias Current, +IN +IB 25°C ±150V VIN = 0 50 pA
1 Input Bias Current, –IN –IB 25°C ±150V VIN = 0 50 pA
1 Input Offset Current IOS 25°C ±150V VIN = 0 50 pA
3 Quiescent Current IQ –40°C ±150V VIN = 0, AV = 100 2.5 mA
3 Input Offset Voltage VOS –40°C ±150V VIN = 0, AV = 100 60 mV
3 Input Offset Voltage VOS –40°C ±50V VIN = 0, AV = 100 60 mV
3 Input Bias Current, +IN +IB –40°C ±150V VIN = 0 50 pA
3 Input BiasCurrent, –IN –IB –40°C ±150V VIN = 0 50 pA
3 Input Offset Current IOS –40°C ±150V VIN = 0 50 pA
2 Quiescent Current IQ 125°C ±150V VIN = 0, AV = 100 3 mA
2 Input Offset Voltage VOS 125°C ±150V VIN = 0, AV = 100 30 mV
2 Input Offset Voltage VOS 125°C ±50V VIN = 0, AV = 100 30 mV
2 Input Offset Voltage VOS 125°C ±175V VIN = 0, AV = 100 30 mV
2 Input Bias Current, +IN +IB 125°C ±150V VIN = 0 1 nA
2 Input Bias Current, –IN –IB 125°C ±150V VIN = 0 1 nA
2 Input Offset Current IOS 125°C ±150V VIN = 0 1 nA
4 Output Voltage VO 25°C ±52V RL = 1K, IO = 40mA 40 V
4 Current Limits ICL 25°C ±30V RL = 100Ω 50 125 mA
4 Stability/Noise EN 25°C ±150V RL = 5K, AV = 1, CL = 10nF, CC = 68pF 10 mVrms
4 Slew Rate SR 25°C ±150V RL = 5K, CC = 6.8pF 5 V/µs
4 Open Loop Gain AOL 25°C ±150V RL = 5K, F = 15Hz 90 dB
4 Common Mode Rejection CMR 25°C ±102V RL = 5K, F = DC, VCM = ±90V 84 dB
6 Output Voltage VO –40°C ±52V RL = 1K, IO = 40mA 40 V
6 Slew Rate SR –40°C ±150V RL = 5K, CC = 6.8pF 5 V/µs
6 Open Loop Gain AOL –40°C ±150V RL = 5K, F = 15Hz 90 dB
6 Common Mode Rejection CMR –40°C ±102V RL = 5K, F = DC, VCM = ±90V 80 dB
5 Output Voltage VO 125°C ±50V RL = 1K, IO = 30mA 30 V
5 Slew Rate SR 125°C ±150V RL = 5K, CC = 6.8pF 5 V/µs
5 Open Loop Gain AOL 125°C ±150V RL = 5K, F = 15Hz 90 dB
5 Common Mode Rejection CMR 125°C ±102V RL = 5K, F = DC, VCM = ±90V 80 dB
BURN IN CIRCUIT * These components are used to stabilize device
due to poor high frequency characteristics of
burn in board.
** Internal power dissipation of approximately
2.1W at case temperature = 125°C.
100KΩ
100KΩ
+50V
–50V
5
6
83
760Ω
** *
U.U.T
*
24
1
100pF
R
CL
The PA241M is available ONLY in the CE (8-pin TO-3) package style.
Table 4 Group A Inspection
PA241M
Product Innovation From
Copyright © Cirrus Logic, Inc. 2009
(All Rights Reserved)
http://www.cirrus.com
SEP 2009
APEX − PA241MUREVB
P r o d u c t I n n o v a t i o n F r o m
PA241M
2 PA241MU
CONTACTING CIRRUS LOGIC SUPPORT
For all Apex Precision Power product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@cirrus.com.
International customers can also request support by contacting their local Cirrus Logic Sales Representative.
To nd the one nearest to you, go to www.cirrus.com
IMPORTANT NOTICE
Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject
to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant
information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale
supplied at the time of order acknowledgment, including those pertaining to warranty, indemnication, and limitation of liability. No responsibility is assumed by Cirrus
for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third
parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights,
copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives con-
sent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent
does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROP-
ERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE
SUITABLE FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PROD-
UCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUS-
TOMER’S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE
CUSTOMER OR CUSTOMER’S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES,
BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL
LIABILITY, INCLUDING ATTORNEYS’ FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
Cirrus Logic, Cirrus, and the Cirrus Logic logo designs, Apex Precision Power, Apex and the Apex Precision Power logo designs are trademarks of Cirrus Logic, Inc.
All other brand and product names in this document may be trademarks or service marks of their respective owners.
