BC847BLD SMALL SIGNAL NPN TRANSISTOR WITH CONTROLLED BASE-EMITTER VOLTAGE Features * * * * * * Low Deviation in Base-Emitter Voltage Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free by Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data * * * * * * * * SOT-23 C Case: SOT-23 Case material: Molded Plastic. "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminal Connections: See Diagram Terminals: Finish - Matte Tin annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.008 grams (approximate) Maximum Ratings 3 1 2 B E Schematic & Pin Configuration @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Output Current - Continuous (Note 3) Peak Collector Current Peak Emitter Current Power Dissipation (Note 3) Power Deration Symbol VCBO VCEO VEBO IC ICM IEM Pd Pder Value 50 45 6 200 200 200 300 2.4 Unit V V V mA mA mA mW mW/C Characteristic Thermal Resistance, Junction to Ambient Air (Note 3) Symbol RJA Value 417 Unit C/W Operating and Storage Junction Temperature Range Tj, TSTG -55 to +150 C Thermal Characteristics Notes: 1. No purposefully added lead. 2. Diode's Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on page 4 or on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS30824 Rev. 4 - 2 1 of 4 www.diodes.com BC847BLD (c) Diodes Incorporated Electrical Characteristics: NPN Transistor Characteristic OFF CHARACTERISTICS (Note 4) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Base Cutoff Current (IBEX) @TA = 25C unless otherwise specified Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICEX IBL 50 45 6 -- -- -- -- -- -- -- Collector-Base Cut Off Current ICBO -- -- Collector-Emitter Cut Off Current, IO(OFF) Emitter-Base Cut Off Current ON CHARACTERISTICS (Note 4) ICEO IEBO -- -- -- -- -- -- -- 15 15 15 5 50 50 V V V nA nA nA A nA nA IC = 10A, IE = 0 IC = 1.0mA, IB = 0 IE = 10A, IC = 0 VCE = 50V, VEB(OFF) = 3.0V VCE = 40V, VEB(OFF) = 3.0V VCB = 40V, IE = 0 o VCB = 30V, TA = 150 C VCE = 40V, IB = 0 VEB = 5V, IC = 0 180 150 220 220 150 150 -- -- 647 -- -- -- -- -- -- -- -- 0.09 0.2 657 -- -- -- -- -- -- -- -- 0.18 0.4 667 0.8 0.9 -- -- -- -- -- -- V V mV V V VCE = 5V, IC = 100A VCE = 5V, IC = 500A VCE = 5V, IC = 1mA VCE = 5V, IC = 2mA VCE = 5V, IC = 5mA VCE = 5V, IC = 10mA IC = 10mA, IB = 0.5mA IC = 100mA, IB = 5mA VCE = 5V, IC = 2mA IC = 10mA, IB = 0.5mA IC = 100mA, IB = 5mA COBO -- 3 -- pF VCB = 5.0V, f = 1.0 MHz, IE = 0 hie hre hfe hoe -- -- -- -- -- -- -- -- Current Gain-Bandwidth Product fT 100 4.5 2 200 30 -- Noise Figure NF -- -- 10 DC Current Gain hfe Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Turn-On Voltage VBE(ON) Base-Emitter Saturation Voltage VBE(SAT) Test Condition SMALL SIGNAL CHARACTERISTICS Output Capacitance Input Impedance Voltage Feedback Ratio Small Signal Current Gain Output Admittance 4. Short duration pulse test used to minimize self-heating effect. 350 450 300 400 TA = 150C 350 250 hFE, DC CURRENT GAIN PD, POWER DISSIPATION (mW) Notes: -- K x 10E-4 VCE = 5.0V, IC = 2mA, f = 1.0KHz -- S VCE = 20V, IC = 10 mA, MHz f = 100 MHz VCE = 5V, IC = 100A, dB RS = 1K, f = 1kHz 200 150 100 50 RJA = 417 o C/W 125 150 25 50 75 100 TA, AMBIENT TEMPERATURE (C) Fig. 1 Maximum Power Dissipation vs. Ambient Temperature DS30824 Rev. 4 - 2 T A = 125C 300 250 TA = 85C 200 150 TA = 25C 100 T A = -55C 50 0 0 VC E = 5V 0 175 1 2 of 4 www.diodes.com 10 100 IC, COLLECTOR CURRENT (mA) Fig. 2 Typical hFE vs. IC 1,000 BC847BLD (c) Diodes Incorporated 0.6 0.2 Ib = 3mA Ib = 3.5mA Ib = 4mA VCE(SAT), COLLECTOR EMITTER SATURATION VOLTAGE (V) 0.16 Ib = 4.5mA 0.14 I = 2.5mA b 0.12 0.1 0.08 0.06 0.04 Ib = 1mA Ib 1.5mA 0.02 Ib = 0.5mA 0.5 0.4 0.3 TA = 150C TA = 125C 0.2 TA = 85C 0.1 TA = 25C Ib = 2mA 0 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 VCE, COLLECTOR EMITTER VOLTAGE (V) Fig. 3 Typical IC vs. VCE VCE = 1V VBE, BASE EMITTER VOLTAGE (V) TA = -55C 0 0.1 1 100 10 IC, COLLECTOR CURRENT (mA) Fig. 4 Typical VCE(SAT) vs. IC 1,000 Ic/Ib=10 VBE(SAT), BASE EMITTER SATURATION VOLTAGE (V) IC, COLLECTOR CURRENT (A) Ic/Ib=10 Ib = 5mA 0.18 TA = 25C T A = -55C TA = 150C TA = 25C TA = -55C TA = 150C TA = 125C TA = 85C TA = 85C T A = 125C 0 0.1 0 0.1 1 100 10 IC, COLLECTOR CURRENT (mA) Fig. 5 Typical VBE vs. IC Ordering Information 1,000 5. 1,000 (Note 5) Packaging SOT-23 Device BC847BLD-7 Notes: 1 100 10 IC, COLLECTOR CURRENT (mA) Fig. 6 Typical VBE(SAT) vs. IC Shipping 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. KLD Date Code Key Year Code Month Code DS30824 Rev. 4 - 2 2006 T Jan 1 2007 U Feb 2 2008 V Mar 3 YM Marking Information 2009 W Apr 4 May 5 KLD = Product Type Marking Code YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September 2010 X Jun 6 3 of 4 www.diodes.com 2011 Y Jul 7 2012 Z Aug 8 2013 A Sep 9 2014 B Oct O 2015 C Nov N Dec D BC847BLD (c) Diodes Incorporated Mechanical Details A SOT-23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 8 0 All Dimensions in mm B C H K M K1 D F J L G Suggested Pad Layout Y Z Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 C 2.0 E 1.35 C X E IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30824 Rev. 4 - 2 4 of 4 www.diodes.com BC847BLD (c) Diodes Incorporated