BI1-EG05-AN6X - Turck - Datasheet.Directory

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

Bi1-EG05-AN6X

●threaed barrel, M5 x 0,5

●stainless steel, 1.4301

●3-wire DC, 10...30 VDC

●normally open npn output

●cable connection

Wiring diagram

Function principles

Inductive proximity switches are designed

for wear-free non-contact detection of me-

tal objects. For this they use a high-fre-

quency electro-magnetic AC field that

interacts with the target. With inductive

sensors, this field is generated by an LC re-

sonant circuit with a ferrite core coil.



npn

Type Bi1-EG05-AN6X

Ident-No. 4609840

Rated operating distance Sn 1 mm

Mounting mode flush

Hysteresis (switching distance) 3... 15 %

Min. repeat accuracy ≤ 2 %

Temperature drift ≤ ± 10 %

Operating temperature -25 ...+ 70 °C

Rated operational voltage (DC) UB10... 30 VDC

Max. ripple ≤ 10 % Upp

Rated operational current (DC) Ie≤ 100 mA

No-load current I0≤ 15 mA

Max. OFF-state current ≤ 0,1 mA

Max. switching frequency ≤ 3 kHz

Rated insulation voltage ≤ 0,5 kV

Output function 3-wire, normally open, NPN

Short-circuit protection yes, cyclic

Max. voltage drop at Ie≤ 1,8 V

Wire breakage / reverse polarity protection yes / complete

Housing style threaded barrel; M5 x 0,5

Dimensions 30 mm

Housing material metal, A2 1.4301 (AISI 304)

Active face plastic, PA12-GF20

Max. fixing torque of coupling nut 5 Nm

Wiring cable

Cable Ø 3, LifYY-11Y, PUR, 2 m

Cable cross section 3 x 0,14 mm2

Vibration resistance 55 Hz (1 mm)

Shock resistance 30 x g (11 ms)

Degree of protection IP67

Switching status indication LED yellow

8/2,8

LED

M5 x 0,5

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

Bi1-EG05-AN6X

Mounting instructions minimum gap

Gap D 2 x B

Gap W 3 x Sn

Gap T 3 x B

Gap S 1,5 x B

Gap G 6 x Sn

Diameter of active face B Ø 5 mm