Cat.No.P50E-6
CERAFILr
(Filters/Traps/Discriminators)
for Audio/Visual Equipment
EU RoHS Compliant
s All the products in this catalog comply with EU RoHS.
s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
CONTENTS CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Part Numbering 2
1. CERAFILr
1-1 CERAFILr 10.7MHz
Small Chip Type SFECF Series 5
Chip Type SFECV/SFECK Series 11
Standard Lead Type SFELF Series 14
Low Loss Type SFELF Series 17
Low Spurious Response Type SFELF Series 20
Wide Bandwidth Type SFELF Series 23
Narrow Bandwidth Type SFELF Series 25
For FM-IF Tuners SFELF Series 27
Related Data on Lead Type 30
1-2 CERAFILr 2.3-6.5MHz
4.5-6.5MHz Chip Type SFSKA Series 31
2.3-5.7MHz Chip Type SFSKB Series 34
1-3 CERAFILr 455kHz
Chip Type SFPKA Series 38
Lead Type SFPLA/CFWLA Series 40
For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series 42
SFp Series Temperature Characteristics 44
2. Ceramic Trap
Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 45
3. Ceramic Discriminator
10.7MHz Ultra Thin Chip Type CDSCB Series 47
Applied IC Reference Table 52
Notice 53
Packaging 69
Part Number Index 74
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
o Part Numbering
e
LF
w
E
u
A0
q
SF
t
F
r
10M7
y
A
i
-B0
(Part Number)
qProduct ID
wOscillation/Number of Elements
CERAFILr for FM
SF Ceramic Filters
Product ID
p is "A" or subsequent code, which indicates the structure/size.
eStructure/Size
Bulk
Embossed Taping ø180mm
Embossed Taping ø330mm
1500pcs. /Radial Taping H0=18mm
1000pcs. /Radial Taping H0=18mm
iPackaging
-B0
-R0
-R1
-A0
-A1
Code Packaging
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" are added between "uSeries" and
"iPackaging."
3dB bandwidth of "F" signifies the frequency difference (both + and -)
from reference frequency, which is nominal center frequency.
2 Elements Thickness Expander mode
3 Elements Thickness Expander mode
2 Elements Thickness Expander mode
(2nd Harmonic)
2 Elements Thickness Expander mode
(3rd Overtone)
E
T
V
K
Code Oscillation/Number of Elements
Lead Type
Chip Type
Lp
Cp
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
t3dB Bandwidth
C
D
E
F
G
H
J
K
L
M
N
450kHz min
350kHz min
330kHz
280kHz
230kHz
180kHz
150kHz
110kHz
80kHz
50kHz
35kHz
Code 3dB Bandwidth
uSeries
A0 Two-digit alphanumerics express series
Code Series
yCenter Frequency/Tolerance
A
B
C
D
E
H
V
W
K
Z
M
F
Center Frequency mentioned by specification
-30kHz shifted from center frequency of code "A"
+30kHz shifted from center frequency of code "A"
-60kHz shifted from center frequency of code "A"
+60kHz shifted from center frequency of code "A"
Center Frequency mentioned by specification
-50kHz shifted from center frequency of code "H"
+50kHz shifted from center frequency of code "H"
Center Frequency mentioned by specification
Combination of A, B, C, D, E
Combination of A, B, C
Nominal Center Frequency
Code Center Frequency
±30kHz
±30kHz
±30kHz
±30kHz
±30kHz
±25kHz
±25kHz
±25kHz
±20kHz
—
—
—
Tolerance
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
CERAFILr
u
-R1
e
KA
w
S
r
4M50
y
00
t
CF
q
SF
(Part Number)
qProduct ID
wOscillation/Numbers of Element
SF Ceramic Filters
Product ID
tProduct Specification Code (1)
BF
CF
DF
EF
Code Product Specification Code (1)
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "yProduct Specification
Code (2)" and "uPackaging."
eStructure/Size
Bulk
Embossed Taping ø=330mm
Tight Bandwidth Type
Standard Bandwidth Type
Broad Bandwidth Type
Ultra-broad Bandwidth Type
yProduct Specification Code (2)
00
Code Product Specification Code (2)
Standard Type
uPackaging
-B0
-R1
Code Packaging
2 Elements Thickness Shear mode
S
Code Oscillation/Numbers of Element
Chip Type
Kp
Code Structure/Size
p is "A" or subsequent code, which indicates the structure/size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
(Part Number)
qProduct ID
wOscillation/Numbers of Element
CERAFILr for AM
SF
CF
Ceramic Filters
Ceramic Filters
Three-digit alphanumerics indicate product
specification of 3dB or 6dB frequency tolerance.
Product ID
tProduct Specification
D4A
Code Product Specification
ppA indicates standard type.
p is "A" or subsequent code, which indicates the structure/size. It
varies depending on vibration mode and number of elements.
eStructure/Size
Bulk
Embossed Taping (ø180mm)
Embossed Taping (ø330mm)
Magazine Cassette
yPackaging
-B0
-R0
-R1
-M0
Code Packaging
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "tProduct Specification"
and "yPackaging."
4 Elements Area Expansion mode
P
Code Oscillation/Numbers of Element
Lead Type
Chip Type
Lp
Cp/Kp
Code Structure/Size
y
-B0
e
KA
w
P
r
455K
t
D4A
q
SF
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz."
CERAFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
Ceramic Traps
y
00
u
-R0
e
KA
w
S
r
4M00
t
B
q
TP
(Part Number)
qProduct ID
wFunction
TP Ceramic Traps
Product ID
tProduct Specification Code (1)
B
C
Code Product Specification (1)
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "yProduct Specification
Code (2)" and "uPackaging."
eStructure/Size
Bulk
Embossed Taping ø=330mm
Broad bandwidth Type
Low capacitance Type
yProduct Specification Code (2)
00
Code Product Specification (2)
Standard Type
uPackaging
-B0
-R1
Code Packaging
Single Traps
S
Code Function
Chip Type
Kp
Code Structure/Size
p is "A" or subsequent code, which indicates the structure/size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
e
LF
w
A
r
10M7
i
-B0
u
001
q
CD
t
G
y
A
(Part Number)
qProduct ID
wOscillation
Discriminators for FM
CD Discriminators
Product ID
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "uIC" and "iPackaging."
eStructure/Size
Bulk
Radial Taping H0=18mm
Embossed Taping ø=180mm
Embossed Taping ø=330mm
uIC
001
Code IC
Applicable IC Control Code
iPackaging
-B0
-A0
-R0
-R1
Code Packaging
Thickness Expander mode
Thickness Shear mode
A
S
Code Oscillation
Lead Type
Chip Type
Lp
Cp
Code Structure/Size
p is "A" or subsequent code, which indicates the structure/size.
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
tSeries
G Two-digit alphanumerics express series
Code Series
yCenter Frequency/Tolerance
A
B
C
D
E
H
V
W
K
Z
M
F
Center Frequency mentioned by specification
-30kHz shifted from center frequency of code "A"
+30kHz shifted from center frequency of code "A"
-60kHz shifted from center frequency of code "A"
+60kHz shifted from center frequency of code "A"
Center Frequency mentioned by specification
-50kHz shifted from center frequency of code "H"
+50kHz shifted from center frequency of code "H"
Center Frequency mentioned by specification
Combination of A, B, C, D, E
Combination of A, B, C
Nominal Center Frequency
Code Center Frequency
±30kHz
±30kHz
±30kHz
±30kHz
±30kHz
±25kHz
±25kHz
±25kHz
±20kHz
—
—
—
Tolerance
3dB bandwidth of "F" signifies the frequency difference (both + and -)
from reference frequency, which is nominal center frequency.
Small Chip Type SFECF Series
SFECF10M7 series for FM receivers are small,
high-performance and super thin (1.4mm max.) fi lters.
The piezoelectric element is sandwiched by the ceramic
substrate. They have 1.4mm max. thickness and a small
mounting area (3.45x3.1mm). SFECF series and
CDSCB series (MHz Discriminator) enable customers to
make VICS/RKE/TPMS set very thin and small.
c Features
1. The fi lters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
fl exible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80°C (Standard Type)
-40 to +85°C (High-reliability Type)
Storage Temperature Range:
-40 to +85°C (Standard Type)
-55 to +85°C (High-reliability Type)
0.75±0.3
(in mm)
1.3±0.1
3.1±0.2
3.45±0.2
(0.6) (0.6) (0.6)
(1.28)
(1.28)
0 to 0.4
(6)
(1.28)(1.28)
0.65±0.3
0.85±0.3
0.85±0.3
0 to 0.35 0 to 0.35
0 to 0.4
(5) (4)
(1) (2) (3)
0.65±0.3
0.3 min.0.3 min.
: EIAJ Monthly Code
: Reference( )
(1): Input
(2)(5): Ground
(3)(4): No connection
(6): Output
0.7±0.3
Input electrode
marker
Standard Type
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7HF00-R0
- 10.700 fn±25 min. 510 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7GA00-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7GF00-R0
- 10.700 fn±45 min. 560 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7FA00-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7FF00-R0
- 10.700 fn±65 min. 620 max. 7.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7EA00-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7DA0001-R0
10.700
±30kHz - 420 min. 950 max. 3.0±2.0dB 3.0 max. 35 min.
[within 9MHz to fo]
25 min.
[within fo to 12MHz] 330
SFECF10M7DF00-R0
- 10.700 fn±150 min. 990 max. 6.0max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn]
20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7HF00S0-R0
- 10.700 fn±25 min. 510 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7GA00S0-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7GF00S0-R0
- 10.700 fn±45 min. 560 max. 8.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7FA00S0-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7FF00S0-R0
- 10.700 fn±65 min. 630 max. 7.0max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn]
25 min.
[within fn to 12MHz] 330
SFECF10M7EA00S0-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0±2.0dB 1.0 max. 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFECF10M7DF00S0-R0
- 10.700 fn±145 min. 990 max. 6.0max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn]
20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
Input
Ground
No connection
Output
(1):
(2)(5):
(3)(4):
(6):
(in mm)
It indicates solder resist land pattern.
1.051.401.05
0.10.10.10.1
0.8 0.6 0.8 0.6 0.8
0.1
0.1
0.3
0.3
0.3
(6) (5) (4)
(1) (2) (3)
c Standard Land Pattern Dimensions
(1)
(2)
(3)
(6)
(5)
(4)
R2C2E2
RF
Voltmeter
R1
E1
S.S.G.
Rg
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF voltmeter)
E1: S.S.G. Output Voltage
: Input
: Ground
: No connection
: Output
(1)
(2)(5)
(3)(4)
(6)
c Test Circuit
High-Reliability Type
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
c Frequency Characteristics Standard Type
SFECF10M7HA00-R0/SFECF10M7HF00-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7GA00-R0/SFECF10M7GF00-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7FA00-R0/SFECF10M7FF00-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.300 10.500 10.700 10.900 11.100
SFECF10M7EA00-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7DA0001-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7DF00-R0
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
c Frequency Characteristics High-reliability Type
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.300 10.500 10.700 10.900 11.100
SFECF10M7EA00S0-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECF10M7DF00S0-R0
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7HA00-R0/SFECF10M7HF00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7GA00-R0/SFECF10M7GF00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7FA00-R0/SFECF10M7FF00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7EA00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7DA0001-R0/SFECF10M7DF00-R0
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1
c Frequency Characteristics (Spurious) Standard Type
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7EA00S0-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFECF10M7DF00S0-R0
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
1c Frequency Characteristics (Spurious) High-reliability Type
Chip Type SFECV/SFECK Series
SFECV/SFECK10M7 series for FM receivers are monolithic
type ceramic fi lters that utilize the thickness expander
mode of piezoelectric ceramics. SFECV series enable
customers to make an AM/FM set very thin, and it can be
useful to the total chip circuit.
c Features
1. The piezoelectric element is sandwiched by heat
resistant substrate, thus it has excellent mechanical
strength, and it is suitable for automatic mounting.
2. Various bandwidths are available. Select a suitable
type in accordance with the desired selectivity.
3. Operating Temperature Range:
-20 to +80°C (Standard Type)
-40 to +85°C (High-reliability Type)
Storage Temperature Range:
-40 to +85°C (Standard Type)
-55 to +85°C (High-reliability Type)
c Applications
1. Small, thin radios
2. Automotive radios
3. Headphone stereos
6.9±0.3
∗
∗
∗
2.9±0.31.5±0.2
4.05±0.4
1.2±0.5
1.0±0.5 1.0±0.5
1.2±0.3 1.2±0.5 1.5±0.2
(3) (2) (1)
(1) : Input
(2) : Ground
(3) : Output
∗∗ : EIAJ Monthly Code
∗∗ : Center Frequency Rank Code
: Marking
(in mm)
1.0±0.5
Standard Type
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECV15M0EQ0001-R0 15.000
±50kHz 300 min. 750 max. 7.0max. 1.0 max. 30 min.
[within 14MHz to fo]
30 min.
[within fo to 16MHz] 330
SFECV10M7KA00-R0 10.700
±30kHz 110 ±30kHz 320 max. 6.0±2.0dB 1.0 max. 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
SFECV10M7JA00-R0 10.700
±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 1.0 max. 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECK10M7KA00S0-R0 10.700
±30kHz 110 ±30kHz 320 max. 6.0±2.0dB 1.0 max. 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
SFECK10M7JA00S0-R0 10.700
±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 1.0 max. 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
High-Reliability Type
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
(in mm)
Land
1.2
1.65
2.85 2.85
1.65
1.2 1.2
4.0
c Standard Land Pattern Dimensions
(1) (3)
(2)
R2C2E2
RF
Voltmeter
R1
E1
S.S.G.
=-10dBm
Rg
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
10.0
8.0
6.0
4.0
2.0
0.0
Frequency (MHz)
Attenuation (dB)
14.700 14.800 14.900 15.000 15.100 15.200 15.300
G.D.T. (μsec.)
0
2
4
6
8
10
c Frequency Characteristics Standard Type
SFECV15M0EQ0001-R0
4.0
3.5
4.5
5.0
5.5
6.0
6.5
7.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECV10M7KA00-R0
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECV10M7JA00-R0
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
4.0
3.5
4.5
5.0
5.5
6.0
6.5
7.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
c Frequency Characteristics High-reliability Type
SFECK10M7KA00S0-R0
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFECK10M7JA00S0-R0
0
70
80
13.000 15.00014.000 16.000 17.000
Frequency (MHz)
Attenuation (dB)
60
50
40
30
20
10
SFECV15M0EQ0001-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECV10M7KA00-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECV10M7JA00-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECK10M7KA00S0-R0
8.700
70
60
50
40
30
20
10
0
9.700 10.700
Frequency (MHz)
Attenuation (dB)
11.700 12.700
SFECK10M7JA00S0-R0
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
2
c Frequency Characteristics (Spurious) Standard Type
c Frequency Characteristics (Spurious) High-reliability Type
Standard Lead Type SFELF Series
SFELF10M7 series for FM-receivers are monolithic type
ceramic fi lters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
c Features
1. These miniature fi lters have high mechanical
strength.
2. Low loss, favorable waveform symmetry, and high
selectivity
3. Various bandwidths are available for applications
in wide to narrow bands.
4. Small dispersion and stable characteristics
5. Change in center frequency is typically within
±30ppm/°C at -20 to +80°C.
6. High reliability
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7HA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7GA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7FA00-B0
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7HA00-B0 10.700
±30kHz 180 ±40kHz 520 max. 7.0max. 40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz] 330
SFELF10M7GA00-B0 10.700
±30kHz 230 ±50kHz 570 max. 4.0±2.0dB 40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz] 330
SFELF10M7FA00-B0 10.700
±30kHz 280 ±50kHz 650 max. 4.0±2.0dB 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
c Frequency Characteristics
SFELF10M7HA00-B0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7GA00-B0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Frequency (MHz)
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
SFELF10M7FA00-B0
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFELF10M7HA00-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7GA00-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7FA00-B0
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
3
Low Loss Type SFELF Series
SFELF10M7 series for FM receivers are monolithic type
ceramic fi lters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
c Features
1. Insertion loss is 1 to 1.5dB lower than
conventional products. These types are useful for
elevating the sensitivity of sets.
2. Small dispersion and stable characteristics
3. Excellent shape factor of frequency response
4. Good waveform symmetry
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7JAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7HAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7GAA0-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7FAA0-B0
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7JAA0-B0 10.700
±30kHz 150 ±40kHz 360 max. 4.5±2.0dB 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
SFELF10M7HAA0-B0 10.700
±30kHz 180 ±40kHz 470 max. 3.5±1.5dB 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
SFELF10M7GAA0-B0 10.700
±30kHz 230 ±50kHz 520 max. 3.0±2.0dB 35 min.
[within 9MHz to fo]
35 min.
[within fo to 12MHz] 330
SFELF10M7FAA0-B0 10.700
±30kHz 280 ±50kHz 590 max. 2.5±2.0dB 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
c Frequency Characteristics
SFELF10M7JAA0-B0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7HAA0-B0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7GAA0-B0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7FAA0-B0
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFELF10M7JAA0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7HAA0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7GAA0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7FAA0-B0
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4
Low Spurious Response Type SFELF Series
SFELF10M7 series for FM-receivers are monolithic type
ceramic fi lters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
c Features
These types have lower spurious response compared
to standard fi lters.
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
(in mm)
SFELF10M7KAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
(in mm)
SFELF10M7JAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
(in mm)
SFELF10M7HAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
(in mm)
SFELF10M7GAB0-B0
(1)
(2)
(3)
7.5±2.0
5.0±1.03.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
MARKING
EIAJ
CODE
(in mm)
SFELF10M7FAB0-B0
Continued on the following page.
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7KAB0-B0 10.700
±30kHz 110 ±30kHz 350 max. 7.0±2.0dB 45/30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFELF10M7JAB0-B0 10.700
±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz] 330
SFELF10M7HAB0-B0 10.700
±30kHz 180 ±40kHz 520 max. 5.0±2.0dB 45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz] 330
SFELF10M7GAB0-B0 10.700
±30kHz 230 ±50kHz 570 max. 3.0±2.0dB 45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz] 330
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
Continued from the preceding page.
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
10.70010.60010.500 10.800 10.900
1
2
3
4
5
6
7
0
c Frequency Characteristics
SFELF10M7KAB0-B0
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
10.70010.60010.500 10.800 10.900
1
2
3
4
5
6
7
0
SFELF10M7JAB0-B0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7HAB0-B0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
SFELF10M7GAB0-B0
Continued on the following page.
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7FAB0-B0 10.700
±30kHz 280 ±50kHz 650 max. 3.0±2.0dB 45 min.
[within 9MHz to fo]
45 min.
[within fo to 12MHz] 330
Continued from the preceding page.
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.500 10.600 10.700 10.800 10.900
c Frequency Characteristics
SFELF10M7FAB0-B0
Frequency (MHz)
Attenuation (dB)
0
10
20
30
40
50
60
70
10.700 11.700 12.7008.700 9.700
c Frequency Characteristics (Spurious)
SFELF10M7KAB0-B0
Frequency (MHz)
Attenuation (dB)
0
10.700 11.700 12.7008.700 9.700
10
20
30
40
50
60
70
SFELF10M7JAB0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7HAB0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7GAB0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7FAB0-B0
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
5
Wide Bandwidth Type SFELF Series
SFELF10M7 series for FM-receivers are monolithic type
ceramic fi lters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
c Features
Realizes wider band characteristics not obtained by
conventional ceramic fi lters.
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7EA00-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7DF00-B0
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7EA00-B0 10.700
±30kHz - 330 ±50kHz 680 max. 4.0±2.0dB 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
SFELF10M7DF00-B0 - 10.700 fn±175 min. 950 max. 3.0±2.0dB 20 min.
[within 5MHz to fn]
20 min.
[within fn to 15MHz] 470
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code (SFELF10M7EA00-B0)
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
6
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
10.70010.50010.300 10.900 11.100
1
2
3
4
5
6
7
0
c Frequency Characteristics
SFELF10M7EA00-B0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.300 10.500 10.700 10.900 11.100
SFELF10M7DF00-B0
0
10
20
30
40
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
c Frequency Characteristics (Spurious)
SFELF10M7EA00-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7DF00-B0
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
6
Narrow Bandwidth Type SFELF Series
c Features
SFELF10M7LFTA/KAH0 series realizes narrower band
characteristics not obtained by conventional ceramic
fi lters. Besides, low spurious and temperature
characteristics are stable. This series is suitable for
European car-audio or AM upconversion use that
needs stable narrow band characteristics.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7LFTA-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7KAH0-B0
Part Number
Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFELF10M7LFTA-B0 - 10.700 fn±25 min. 280 max. 7.0±2.0dB 30 min.
[within 9MHz to fn]
30 min.
[within fn to 12MHz] 330
SFELF10M7KAH0-B0 10.700
±30kHz - 110 ±30kHz 350 max. 7.0±2.0dB 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code (SFELF10M7KAH0-B0)
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
7
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.600 10.650 10.700 10.750 10.800
c Frequency Characteristics
SFELF10M7LFTA-B0
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
10.70010.65010.600 10.750 10.800
1
2
3
4
5
6
7
0
SFELF10M7KAH0-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFELF10M7LFTA-B0
10
20
30
40
50
60
0
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
SFELF10M7KAH0-B0
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
7
For FM-IF Tuners SFELF Series
SFELF10M7 series for FM-receivers are monolithic type
ceramic fi lters that use the thickness expander mode
of the piezoelectric ceramic.
As part of the environment protection program, the solder
for terminal plating and terminal-element connection
inside of the ceramic fi lter contain no lead (Pb).
c Features
1. Little dispersion of amplitude characteristics and
phase characteristics (G. D. T. characteristics)
2. The SFELF_G series is based on SFELF_FA00/GA00/
HA00, and it obtains high selectivity with low loss.
There is little dispersion of amplitude and GDT
characteristics, and low distortion rate can be
obtained.
3. The fl atness of GDT is inspected for all products.
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7HA0G-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7GA0G-B0
(1)
(2)
(3)
7.0±2.0
5.0±1.0
2.5±0.2
0.5±0.1
1.7±0.1
0.3±0.1
1.38±0.2
2.5±0.2
7.0±2.0
M A R K I N G
E I A J
C O D E
3.0±1.0
(in mm)
(1) : Input
(2) : Ground
(3) : Output
SFELF10M7FA0G-B0
Part Number
Center
Frequency
(fo) (MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz)
Insertion Loss
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
GDT Bandwidth
(kHz)
Input/Output
Impedance
(ohm)
SFELF10M7HA0G-B0 10.700
±30kHz 180 ±40kHz 520 max. 7.0max. 40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz] fo±45min. 330
SFELF10M7GA0G-B0 10.700
±30kHz 230 ±50kHz 600 max. 7.0max. 40 min.
[within 9MHz to fo]
40 min.
[within fo to 12MHz] fo±60min. 330
SFELF10M7FA0G-B0 10.700
±30kHz 280 ±50kHz 650 max. 4.0±2.0dB 30 min.
[within 9MHz to fo]
30 min.
[within fo to 12MHz] fo±85min. 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point
Center frequency (fo) defi ned by the center of 3dB bandwidth.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
27
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Color Code
Black
Blue
Red
Orange
White
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
(1) (2) (3)
C
S.S.G
RF
Rg
R1
R2
Rg + R1 = R2 = Input and Output Impedance
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
Voltmeter
(1) : Input
(2) : Ground
(3) : Output
c Test Circuit
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.400 10.500 10.600 10.700 10.800 10.900 11.000
c Frequency Characteristics
SFELF10M7HA0G-B0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.400 10.500 10.600 10.700 10.800 10.900 11.000
SFELF10M7GA0G-B0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (μsec.)
7
6
5
4
3
2
1
0
10.400 10.500 10.600 10.700 10.800 10.900 11.000
SFELF10M7FA0G-B0
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFELF10M7HA0G-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7GA0G-B0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
SFELF10M7FA0G-B0
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
8
CERAFILr 10.7MHz Related Data on Lead Type
–20
–40
–20
0
+20
+40
0 +20
Temperature (°C)
+40 +60 +80
Center frequency
–20
–2
–1
0
+1
+2
0 +20
Temperature (°C)
+40 +60 +80
Insertion loss
–20
–40
–20
0
+20
+40
0 +20
Temperature (°C)
+40 +60 +80
3dB Bandwidth
Variation (kHz)Variation (dB)Variation (kHz)
c Temperature Characteristics
SFELF10M7GA00-B0
–20
–40
–20
0
+20
+40
0 +20 +40 +60 +80
–20
–2
–1
0
+1
+2
0 +20 +40 +60 +80
–20
–40
–20
0
+20
+40
0 +20 +40 +60 +80
Temperature (°C)
Center frequency
Temperature (°C)
Insertion loss
Temperature (°C)
3dB Bandwidth
Variation (kHz)Variation (dB)Variation (kHz)
SFELF10M7HA00-B0
c Matching Conditions
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
R2=220ΩR2=330Ω
R2=560ΩR2=1kΩ
Attenuation (dB)Attenuation (dB)
Attenuation (dB)Attenuation (dB)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Group Delay Time (μsec.)Group Delay Time (μsec.)
Group Delay Time (μsec.)Group Delay Time (μsec.)
SFELF10M7GA00-B0
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
7
6
5
4
3
2
1
01.2
1.0
0.8
0.6
0.4
0.2
0
10.7 10.8 10.910.610.5
C=10pF C=33pF
C=56pF C=82pF
Attenuation (dB)Attenuation (dB)
Attenuation (dB)Attenuation (dB)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Group Delay Time (μsec.)Group Delay Time (μsec.)
Group Delay Time (μsec.)Group Delay Time (μsec.)
SFELF10M7HA00-B0
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
c Loaded Resistance and Waveform (Rg+R1=330 ohm)
c Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm)
1. When using ceramic fi lters, it is most important to
match the input/output load to impedance 330 ohm
(SFELF10M7DF00-B0 is 470 ohm).
Waveform symmetry is damaged when reactance is
added to the input/output load.
2. Two ceramic fi lters directly connected can be used
for high selectivity. For reducing waveform
variation, it is recommended to input a buffer AMP
between ceramic fi lters.
3. The SFELF10M7 series are of input/output symmetric
structure so that in theory there is no input/output
directionality. Actual circuits may use different
input/output loading conditions (for example,
mismatched impedance) or capacitance load. In such
cases, the waveform will be a little changed by the
direction of the input/output of the ceramic fi lters.
4.5-6.5MHz Chip Type SFSKA Series
SMD ceramic fi lter SFSKA_CF is a small and thin SMD
fi lter sealed with a metal cap.
Recommended for LCD-TVs, and small and thin tuners.
c Features
1. High attenuation outside bandwidth
2. Small and thin package
3. Refl ow-solderable (1) : Input
(2) : Ground
(3) : Output
7.9±0.2 3.0±0.1
8.5±0.2 3.8±0.2
1.8±0.2
0.5±0.1
0.6±0.2 1.0±0.1
1.3±0.2
2.5±0.2 2.5±0.2
0.3±0.1
1.3±0.2
(1) (2) (3) (in mm)
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKA4M50CF00-R3 4.500 fn±60 min. 600 max. 6.0 max. 20 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz] 1000
SFSKA5M50CF00-R3 5.500 fn±60 min. 600 max. 6.0 max. 25 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz] 600
SFSKA6M00CF00-R3 6.000 fn±60 min. 600 max. 6.0 max. 25 min.
[within 0 to fn]
15 min.
[within fn to 7.5MHz] 470
SFSKA6M50CF00-R3 6.500 fn±60 min. 600 max. 6.0 max. 25 min.
[within 0 to fn]
15 min.
[within fn to 8.5MHz] 470
Area of Insertion Loss: at minimum loss point
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
1.0 1.0
1.5 1.5
4.8
1.0
(in mm)
c Standard Land Pattern Dimensions
E2
C2
R2
RF
Voltmeter
Rg
E1
R1
S.S.G.
(1) (2) (3)
R1+Rg=R2=1000Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1:S.S.G. Output voltage
(1) :
(2) :
(3) :
Input
Ground
Output
c Test Circuit
SFSKA4M50CF00-R3
Continued on the following page.
31
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
9
CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment
Continued from the preceding page.
E2
C2
R2
RF
Voltmeter
Rg
E1
R1
S.S.G.
(1) (2) (3)
R1+Rg=R2=600Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) :
(2) :
(3) :
Input
Ground
Output
c Test Circuit
SFSKA5M50CF00-R3
E2
C2
R2
RF
Voltmeter
Rg
E1
R1
S.S.G.
(1) (2) (3)
R1+Rg=R2=470Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) :
(2) :
(3) :
Input
Ground
Output
SFSKA6M00CF00-R3
E2
C2
R2
RF
Voltmeter
Rg
E1
R1
S.S.G.
(1) (2) (3)
R1+Rg=R2=470Ω ±5%, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
(1) :
(2) :
(3) :
Input
Ground
Output
SFSKA6M50CF00-R3
3.5 3.93.7 4.1 4.5 4.9 5.34.3
Attenuation (dB)
4.7
Frequency (MHz)
5.1 5.5
0
10
20
30
40
50
60
70
c Frequency Characteristics
SFSKA4M50CF00-R3
4.5 4.7 4.9 5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA5M50CF00-R3
5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA6M00CF00-R3
5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA6M50CF00-R3
32
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
9
0.0 2.0 4.0
Attenuation (dB)
6.0
Frequency (MHz)
8.0 10.0
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFSKA4M50CF00-R3
0 2.0 4.0 6.0 8.0 10.0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA5M50CF00-R3
0 2.0 4.0 6.0 8.0 10.0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA6M00CF00-R3
0 2.0 4.0 6.0 8.0 10.0
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKA6M50CF00-R3
33
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
9
2.3-5.7MHz Chip Type SFSKB Series
The SFSKB series are SMD ceramic fi lters suitable
for IR headphone applications.
Center frequencies of 2.3, 2.8, 3.2, 3.8, 4.3, 4.8, 5.2,
5.7MHz are available.
Realized small, thin and lightweight package,
compared with conventional LC fi lters.
It helps to compose multi-channel circuit on one PCB.
No frequency adjustment is required on PCB and it
contributes to the reduction of production cost.
c Features
1. SMD package in plastic emboss tape, available
for automatic placing.
2. They are slim, at only 1.5mm max. thickness,
and have a small mounting area (5.2x3.8mm) enabling
fl exible PCB design.
3. Available for lead (Pb) free refl ow soldering process.
4. Operating temperature range: 0 to +70°C
Storage temperature range: -55 to +85°C
5. No frequency adjustment is required in production
process.
6. Small, thin and lightweight package compared with
conventional LC fi lters
c Applications
1. IR headphone
2. Set Top Box for satellite broadcasting
(in mm)
∗
5.2±0.1
(0.1) 1.5±0.1
0.3±0.1
(2.0) 4-0.35
(4.93)
0.25±0.1
4-0.35 (3.5)
3.8±0.1
(1.6)
1.0±0.1
(0.1) 1.35±0.15
Terminal Connection
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external
capacitor
∗ : EIAJ Monthly Code
Tolerance unless otherwise
specified : ±0.1mm
( ) : Reference
(1)
(1)
(2)
(4)
(3)
(2)
(4)
(3)
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKB2M30GF00-R1 2.300 fn±75 min. 650 max. 6.0 max. 25 min.
[within 1.3 to 1.8MHz]
23 min.
[within 2.8 to 3.3MHz] 1000
SFSKB2M80GF00-R1 2.800 fn±75 min. 650 max. 6.0 max. 25 min.
[within 1.8 to 2.3MHz]
25 min.
[within 3.3 to 3.8MHz] 1000
SFSKB3M20FF00-R1 3.200 fn±75 min. 650 max. 6.0 max. 30 min.
[within 2.2 to 2.8MHz]
30 min.
[within 3.8 to 4.2MHz] 1000
SFSKB3M80GF00-R1 3.800 fn±75 min. 650 max. 6.0 max. 30 min.
[within 2.8 to 3.2MHz]
30 min.
[within 4.3 to 4.8MHz] 1000
SFSKB4M30GF00-R1 4.300 fn±75 min. 650 max. 6.0 max. 30 min.
[within 3.3 to 3.8MHz]
30 min.
[within 4.8 to 5.3MHz] 1000
SFSKB4M80GF00-R1 4.800 fn±75 min. 650 max. 6.0 max. 30 min.
[within 3.8 to 4.3MHz]
30 min.
[within 5.2 to 5.8MHz] 1000
SFSKB5M20GF00-R1 5.200 fn±75 min. 650 max. 6.0 max. 30 min.
[within 4.2 to 4.8MHz]
30 min.
[within 5.7 to 6.2MHz] 1000
SFSKB5M70GF00-R1 5.700 fn±75 min. 650 max. 6.0 max. 30 min.
[within 4.7 to 5.2MHz]
30 min.
[within 6.2 to 6.7MHz] 1000
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
34
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
10
CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment
(in mm)
1.8 2.0 1.8
1.3 1.6 1.3
c Standard Land Pattern Dimensions
R1
Rg
S.S.G.
R2
Cc
C2
RF
Voltmeter
(1)
(3)
(4)
(2)
E2
E1
R1+Rg=R2=1.0kΩ
Cc=22pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
c Test Circuit
SFSKB2M30GF00-R1/SFSKB3MZ0GF00-R1
R1
Rg
S.S.G.
R2
Cc
C2
RF
Voltmeter
(1)
(3)
(4)
(2)
E2
E1
R1+Rg=R2=1.0kΩ
Cc=39pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
SFSKB2M80GF00-R1/SFSKB3M20FF00-R1
R1
Rg
S.S.G.
R2
Cc
C2
RF
Voltmeter
(1)
(3)
(4)
(2)
E2
E1
R1+Rg=R2=1.0kΩ
Cc=33pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
SFSKB4M30GF00-R1/SFSKB5M70GF00-R1
R1
Rg
S.S.G.
R2
Cc
C2
RF
Voltmeter
(1)
(3)
(4)
(2)
E2
E1
R1+Rg=R2=1.0kΩ
Cc=15pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
SFSKB4M80GF00-R1
R1
Rg
S.S.G.
R2
Cc
C2
RF
Voltmeter
(1)
(3)
(4)
(2)
E2
E1
R1+Rg=R2=1.0kΩ
Cc=27pF±5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external capacitor
SFSKB5M20GF00-R1
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
10
1.300 2.3001.800 2.800 3.300
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
c Frequency Characteristics
SFSKB2M30GF00-R1
1.800 2.8002.300 3.300 3.800
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB2M80GF00-R1
2.200 3.2002.700 3.700 4.200
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB3M20FF00-R1
2.800 3.8003.300 4.300 4.800
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB3M80GF00-R1
3.300 4.3003.800 4.800 5.300
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB4M30GF00-R1
3.800 4.8004.300 5.300 5.800
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB4M80GF00-R1
4.200 5.2004.700 5.700 6.200
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB5M20GF00-R1
4.700 5.7005.200 6.200 6.700
Attenuation (dB)
Frequency (MHz)
0
10
20
30
40
50
60
70
SFSKB5M70GF00-R1
36
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
10
0.300 1.300 2.300
Attenuation (dB)
3.300
Frequency (MHz)
4.300
0
10
20
30
40
50
60
70
c Frequency Characteristics (Spurious)
SFSKB2M30GF00-R1
0.800 1.800 2.800
Attenuation (dB)
3.800
Frequency (MHz)
4.800
0
10
20
30
40
50
60
70
SFSKB2M80GF00-R1
1.200 2.200 3.200
Attenuation (dB)
4.200
Frequency (MHz)
5.200
0
10
20
30
40
50
60
70
SFSKB3M20FF00-R1
1.800 2.800 3.800
Attenuation (dB)
4.800
Frequency (MHz)
5.800
0
10
20
30
40
50
60
70
SFSKB3M80GF00-R1
2.300 3.300 4.300
Attenuation (dB)
5.300
Frequency (MHz)
6.300
0
10
20
30
40
50
60
70
SFSKB4M30GF00-R1
2.800 3.800 4.800
Attenuation (dB)
5.800
Frequency (MHz)
6.800
0
10
20
30
40
50
60
70
SFSKB4M80GF00-R1
3.200 4.200 5.200
Attenuation (dB)
6.200
Frequency (MHz)
7.200
0
10
20
30
40
50
60
70
SFSKB5M20GF00-R1
3.700 4.700 5.700
Attenuation (dB)
6.700
Frequency (MHz)
7.700
0
10
20
30
40
50
60
70
SFSKB5M70GF00-R1
37
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
10
Chip Type SFPKA Series
SFPKA series for AM use is one of the most
recommendable intermediate fi lters, having such
distinctive features as high selectivity, high
stability and adjustment-free operation.
Additionally, its easy matching with IC helps create an
easy circuit design.
c Features
1. The fi lters are mountable by automatic placers
and can be refl ow soldered and withstand
washing.
2. The fi lters are wide bandwidth and high
selectivity, so they are suitable for car radio
and multi-band radio.
7.5±0.3
5.0 max.
3.0±0.3
8.4 max.
2.0±0.3
1.5±0.3
7.0±0.3
0.9±0.1
MARKING
EIAJ
CODE
2.0±0.3
(1) (2) (3)
1.5±0.3 1.6±0.3
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
Element
SFPKA450KH1A-R1 450.0 ±1.0kHz fn±3.0 min. 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4
SFPKA450KG1A-R1 450.0 ±1.0kHz fn±4.5 min. 40 min.[fn-10kHz] 40 min.[fn+10kHz] 6.0 max. 1500 4
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
(in mm)
2.0
2.475
6.95
1.61.55 7.45 0.80.9
0.925 2.0 2.0
1.1
c Standard Land Pattern Dimensions
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPKA
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
s-ATCHINGOF#%2!&),r3&0+!SERIESWITH)&4ISDECIDEDBYTHE1UOF)&4
AND)&4SECONDARYSIDEIMPEDANCE\:\3ETTHE1UATABOUTBECAUSE
A1UVALUEWHICHISTOOHIGHEGMAYPRODUCERIPPLEINTHEWAVEFORM
)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\WITHTHATOFTHE
#%2!&),r
c Recommended IFT
Rg+R1=R2=Input/Output Impedance
E1: S.S.G. Output Voltage
E1
R1
Rg
S.S.G.
0dBm
(1)
(2)
(3)
R2 E2
RF Voltmeter
(1): Input
(2): Ground
(3): Output
c Test Circuit
38
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
11
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
100
40
30
20
10
0
Attenuation (dB)
200
400
G.D.T. (μsec.)
425 450 475
Frequency (kHz)
90
80
70
60
50
360
280
320
240
160
120
80
40
0
c Frequency Characteristics
SFPKA450KH1A-R1
100
40
30
20
10
0
Attenuation (dB)
0
200
400
G.D.T. (μsec.)
425 450 475
Frequency (kHz)
90
80
70
60
50
360
320
280
240
160
120
80
40
SFPKA450KG1A-R1
39
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
11
Lead Type SFPLA/CFWLA Series
SFPLA/CFWLA series for AM use is one of the most
suitable intermediate fi lters, having such
distinctive features as high selectivity, high
stability, high attenuation, and adjustment-free
operation. Additionally, its easy matching with IC
helps create an easy circuit design.
This is the most suitable for car stereo and
all band radio with high attenuation.
3.0
±
0.3
7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7
±
0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
SFPLA Series
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.9—0.3
2.9±0.3
CFWLA Series
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
Element
SFPLA450KJ1A-B0 450.0 ±1.0kHz fn±2.0 min. 40 min.[fn-7.5kHz] 40 min.[fn+7.5kHz] 6.0 max. 2000 4
SFPLA450KH1A-B0 450.0 ±1.0kHz fn±3.0 min. 40 min.[fn-9kHz] 40 min.[fn+9kHz] 6.0 max. 2000 4
CFWLA450KJFA-B0 450.0 (fn) fn±2.0 min. 50 min.[fn-7.5kHz] 50 min.[fn+7.5kHz] 7.0 max. 2000 6
CFWLA450KHFA-B0 450.0 (fn) fn±3.0 min. 50 min.[fn-9kHz] 50 min.[fn+9kHz] 6.0 max. 2000 6
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPLA/CFWLA
7x7mm IFT
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
s-ATCHINGOF#%2!&),r3&0,!#&7,!SERIESWITH)&4ISDECIDEDBYTHE
1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE\:\3ETTHE1UATABOUT
BECAUSEA1UVALUEWHICHISTOOHIGHEGMAYPRODUCERIPPLEINTHE
WAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\WITHTHATOF
THE#%2!&),r
c Recommended IFT
Input Output
R1
Rg
SSG
Ground
R2
RF
Voltmeter
Rg+R1 =R2 : Input/Output Impedance
c Test Circuit
40
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
12
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
0
10
20
30
40
50
60
70
Attenuation (dB)
430 440 450 460 470
Frequency (kHz)
c Frequency Characteristics
IFT+SFPLA450KH1A-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
Frequency (kHz)
Attenuation (dB)
IFT+CFWLA450KHFA-B0
70
60
80
50
40
30
20
10
0
012345678910
Frequency (MHz)
Attenuation (dB)
c Frequency Characteristics (Spurious)
IFT+SFPLA450KH1A-B0
70
60
80
50
40
30
20
10
0
012345678910
Frequency (MHz)
Attenuation (dB)
IFT+CFWLA450KHFA-B0
41
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
12
For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series
SFPLA/CFULA/CFWLA series for AM use is one of
the most suitable intermediate fi lters, having such
distinctive features as high selectivity, high stability,
high attenuation, and adjustment-free operation.
Additionally, its easy matching with IC helps create
an easy circuit design.
Especially, CFULA/CFWLA_Y series improves the
frequency fi delity in the high sound area of an AM
stereo with its wide band and fl at characteristics of
group delay time.
3.0
±
0.3
7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7
±
0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
SFPLA Series
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(in mm)
2.9—0.3
2.9±0.3
CFWLA Series
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1): Input
(2): Ground
(3): Output
(in mm)
CFULA Series
Part Number
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Selectivity (-)
(dB)
Selectivity (+)
(dB)
Insertion
Loss
(dB)
GDT 20µsec.
Bandwidth
(kHz)
Input/Output
Impedance
(ohm)
Element
SFPLA450KG1A-B0 450.0 ±1.0kHz fn±4.5 min. 30 min.[fn-9kHz] 30 min.[fn+9kHz] 6.0 max. - 2000 4
SFPLA450KF1A-B0 450.0 ±1.0kHz fn±6.0 min. 40 min.[fn-12.5kHz] 40 min.[fn+12.5kHz] 6.0 max. - 2000 4
SFPLA450KE1A-B0 450.0 ±1.0kHz fn±7.5 min. 40 min.[fn-15kHz] 40 min.[fn+15kHz] 6.0 max. - 1500 4
SFPLA450KD1A-B0 450.0 ±1.0kHz fn±10.0 min. 40 min.[fn-20kHz] 40 min.[fn+20kHz] 4.0 max. - 1500 4
CFULA450KG1Y-B0 450.0 ±1.0kHz fn±4.5 min. 40 min.[fn-15kHz] 40 min.[fn+15kHz] 10.0 max. fn±3 2000 4
CFULA450KF1Y-B0 450.0 ±1.0kHz fn±6.0 min. 40 min.[fn-17.5kHz] 40 min.[fn+17.5kHz] 9.0 max. fn±4 2000 4
CFULA450KD1Y-B0 450.0 ±1.0kHz fn±10.0 min. 40 min.[fn-25kHz] 40 min.[fn+25kHz] 7.0 max. fn±7 1500 4
CFWLA450KG1Y-B0 450.0 ±1.0kHz fn±4.5 min. 50 min.[fn-15kHz] 50 min.[fn+15kHz] 11.0 max. fn±4 2000 6
CFWLA450KF1Y-B0 450.0 ±1.0kHz fn±6.0 min. 50 min.[fn-17.5kHz] 50 min.[fn+17.5kHz] 10.0 max. fn±5 2000 6
CFWLA450KD1Y-B0 450.0 ±1.0kHz fn±10.0 min. 50 min.[fn-25kHz] 50 min.[fn+25kHz] 8.0 max. fn±8 1500 6
CFWLA450KGFA-B0 450.0 (fn) fn±4.5 min. 50 min.[fn-10kHz] 50 min.[fn+10kHz] 6.0 max. - 2000 6
CFWLA450KFFA-B0 450.0 (fn) fn±6.0 min. 50 min.[fn-12.5kHz] 50 min.[fn+12.5kHz] 6.0 max. - 2000 6
CFWLA450KEFA-B0 450.0 (fn) fn±7.5 min. 50 min.[fn-15kHz] 50 min.[fn+15kHz] 6.0 max. - 1500 6
CFWLA450KDFA-B0 450.0 (fn) fn±10.0 min. 50 min.[fn-20kHz] 50 min.[fn+20kHz] 4.0 max. - 1500 6
Area of Insertion Loss: at minimum loss point
Center frequency (fo) is defi ned by the center of 6dB bandwidth.
(fn) means nominal center frequency (450kHz).
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
42
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
13
CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment
(1)
(2)
S(3) (4)S
(6)
Type
Item
Winding Specification
No load Qu
Tuning Capacitance
40
180pF
SFPLA/CFULA/CFWLA
7x7mm IFT
(1)—(2) (2)—(3) (4)—(6)
60T 125T 28T
(Bottom view)
s-ATCHINGOF#%2!&),r3&0,!#&5,!#&7,!SERIESWITH)&4ISDECIDED
BYTHE1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE\:\3ETTHE1UAT
ABOUTBECAUSEA1UVALUEWHICHISTOOHIGHEGMAYPRODUCE
RIPPLEINTHEWAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\:\
WITHTHATOFTHE#%2!&),r
c Recommended IFT
Input Output
R1
Rg
SSG
Ground
R2
RF
Voltmeter
Rg+R1 =R2 : Input/Output Impedance
c Test Circuit
0
10
20
30
40
50
60
70
Attenuation (dB)
430 440 450 460 470
Frequency (kHz)
c Frequency Characteristics
IFT+SFPLA450KF1A-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
Frequency (kHz)
Attenuation (dB)
IFT+CFWLA450KFFA-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
200
100
0
Group Delay Time (μsec.)
Frequency (kHz)
Attenuation (dB)
IFT+CFULA450KF1Y-B0
70
60
50
40
30
20
10
0
430 440 450 460 470
200
100
0
Group Delay Time (μsec.)
Frequency (kHz)
Attenuation (dB)
IFT+CFWLA450KF1Y-B0
43
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
13
CERAFILr 455kHz SFp Series Temperature Characteristics
-
20 020 40 60 80
-
1
0
+1
-
20
020 40
60 80
-
1
0
-
1
+1
-
20 0
20 40 60 80
0
+1
Center Frequency
(kHz)
3dB Bandwidth
(kHz)
Insertion Loss
(dB)
Temperature (°C)
Temperature (°C)
Temperature (°C)
c SFPLA450KH1A-B0
44
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
4.5-6.5MHz Chip Type TPSKA Series
SMD ceramic trap TPSKA_B is a small and thin SMD trap
sealed with a metal cap recommended for LCD-TVs, and
small and thin tuners.
c Features
1. High attenuation and high performance group
delay time
2. Small and thin package
3. Refl ow-solderable (1) : Input
(2) : Ground
(3) : Output
7.9±0.2 3.0±0.1
8.5±0.2 3.8±0.2
1.8±0.2
0.5±0.1
0.6±0.2 1.0±0.1
1.3±0.2
2.5±0.2 2.5±0.2
0.3±0.1
1.3±0.2
(1) (2) (3)
(in mm)
Part Number Nominal Center Frequency (fn1)
(MHz)
Attenuation (at fn1)
(dB)
30dB Attenuation BW (fn1)
(kHz)
TPSKA4M50B00-R3 4.500 35 min. 50 min.
TPSKA5M50B00-R3 5.500 35 min. 70 min.
TPSKA6M00B00-R3 6.000 35 min. 70 min.
TPSKA6M50B00-R3 6.500 35 min. 70 min.
For safety purposes, connect the output of fi lters to the IF amplifi er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic fi lters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
1.0 1.0
1.5 1.5
4.8
1.0
(in mm)
c Standard Land Pattern Dimensions
RF
Voltmeter
Rg
R1
L
S.S.G.
Rg=50Ω
R1=330Ω
R2=1.0kΩ
L=15μH
50ΩR2
c Test Circuit
Attenuation (dB)
Frequency (MHz)
4.0 4.24.1 4.3 4.5 4.7 4.94.4 4.6 4.8 5.0
0
10
20
30
40
50
60
70
c Frequency Characteristics
TPSKA4M50B00-R3
Attenuation (dB)
Frequency (MHz)
5.0 5.25.1 5.3 5.5 5.7 5.95.4 5.6 5.8 6.0
0
10
20
30
40
50
60
70
TPSKA5M50B00-R3
Continued on the following page.
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
14
CERAFILr (Ceramic Trap) for Audio/Visual Equipment
Continued from the preceding page.
Attenuation (dB)
Frequency (MHz)
5.5 5.75.6 5.8 6.0 6.2 6.45.9 6.1 6.3 6.5
0
10
20
30
40
50
60
70
c Frequency Characteristics
TPSKA6M00B00-R3
Attenuation (dB)
Frequency (MHz)
6.0 6.26.1 6.3 6.5 6.7 6.96.4 6.6 6.8 7.0
0
10
20
30
40
50
60
70
TPSKA6M50B00-R3
Attenuation (dB)
Frequency (MHz)
0 1.0 2.0 3.0 4.0 5.0
G.D.T. (nsec)
0
10
20
30
40
50
60
70
80
700
600
500
400
300
200
100
0
c Frequency Characteristics (Spurious)
TPSKA4M50B00-R3
Attenuation (dB)
Frequency (MHz)
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
G.D.T. (nsec.)
0
10
20
30
40
50
60
70
80
1000
800
600
400
200
0
TPSKA5M50B00-R3
Attenuation (dB)
Frequency (MHz)
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
G.D.T. (nsec.)
0
10
20
30
40
50
60
70
80
1000
800
600
400
200
0
TPSKA6M00B00-R3
Attenuation (dB)
Frequency (MHz)
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
G.D.T. (nsec.)
0
10
20
30
40
50
60
70
80
1000
800
600
400
200
0
TPSKA6M50B00-R3
46
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
14
10.7MHz Ultra Thin Chip Type CDSCB Series
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
c Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics.
5. Available lead (Pb) free solder refl ow.
4.1 max.
1.0 max.
4.5±0.1
0.2±0.2
2.0±0.1
0.3±0.2
0.4(ref.) 0.4(ref.)
1.4 max.
0.4±0.05
1.5±0.1
0.8±0.10.8±0.1
1.5±0.1 (in mm)
Part Number
Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV) IC
CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. - TEA5757HL
CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. - TA2154FN
CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. - TRF6901
CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. - LV23100V
CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101
CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122
CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. - TA31161
CDSCB10M7GF107S-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. - TA31272FN
CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. - TK14588V
CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV
(fn) means nominal center frequency (10.700MHz).
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
CODE
D
B
A
C
E
Z
M
30kHz Step
10.64MHz±30kHz
10.67MHz±30kHz
10.70MHz±30kHz
10.73MHz±30kHz
10.76MHz±30kHz
25kHz Step
10.650MHz±25kHz
10.675MHz±25kHz
10.700MHz±25kHz
10.725MHz±25kHz
10.750MHz±25kHz
Combination A, B, C, D, E
Combination A, B, C
c Standard Center Frequency Rank Code
47
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
15
CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment
2.6
1.0 2.0 1.0
3.0
(in mm)
c Standard Land Pattern Dimensions
48 41424344454647
13
12
20191817161514
4.7μ
X
150
S.S.G.
Vcc (3.0V)
0.1μ
0.47μ
TEA5757HL
(PHILIPS)
+
40
21
39
22
38
23
37
24
X: CDSCB10M7GA105A-R0
0.1μ
0.1μ 10μ
100μ
10
100k
+
+
AFC (n)
AFC (p)
AF OUT
DC OUT
330p
0.22μ
11
10
9
8
7
6
5
4
3
2
1
25
26
27
28
29
30
31
32
33
34
35
36
0.1μ
Unit C
R
: F
: Ω
c Test Circuit
CDSCB10M7GA105A-R0
30 23242526272829
1 8765432
2.2μ
D.C. OUT
S.S.G.
Vcc (1.2V)
AF OUT
0.01μ
0.01μ
0.01μ
0.01μ
680p
TA2154FN (TOSHIBA)
+
22
9
21
10
20
11
19
12
18
13
17
14
16
15
X: CDSCB10M7GA113-R0
0.01μ
X
Unit C
R
: F
: Ω
CDSCB10M7GA113-R0
0.01μ
0.01μ
0.01μ
0.01μ
0.01μ
0.47μ
2.2μ 0.1μ
0.1μ
0.22μ
4.7μ
120p
220k
68p
15p
82p
47p
1000p
100p
100p
10k
10k
1k
+
10
IF Input AF Output
Vcc (3.0V)
(TEXAS INSTRUMENTS)
TRF6901
PIC16F84
X
Unit C
R
L
: F
: Ω
: H
+
X: CDSCB10M7GA119-R0
1
2
3
4
5
6
7
8
9
10
11
12
36
35
34
33
32
31
30
29
28
27
26
25
13 14 15 16 17 18 19 20 21 22 23 24
48 47 46 45 44 43 42 41 40 39 38 37
18 17 16 15 14 13 12 11 10
123456789
CDSCB10M7GA119-R0
0.47μ
0.01μ
AF Output D.C. Output
LV23100V (SANYO)
PIC16F84 (Control IC)
10k
10k
10k
Vcc (3.2V)
1μ
0.047μ
0.047μ
2.2μ 0.1μ
1k
0.047μ10k75
0.015μ
0.01μ
100μ
10p
100p
10p
22μ
10μ
3.3k
+
1μ
+
+
+
+
+
+
S.G.
X
Unit C
R
: F
: Ω
X: CDSCB10M7GA121-R0
36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19
1234567 98 101112131415161718
18
1
17
2
16
3
15
4
14
5
13
6
12
7
10
9
11
8
CDSCB10M7GA121-R0
Continued on the following page.
48
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
15
Continued from the preceding page.
Unit C
R
: F
: Ω
X: CDSCB10M7GA135-R0
12345678
9
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
220k
0.01μ
0.01μ
1000p
0.1μ
0.01μ1000p100p
330p
0.033μ
12p
0.01μ
0.01μ
0.01μ
1000p
C.D.
330p10μ
+
S.G.
Vcc (5.0V)
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
FKS-OUTAF-OUT
330k
c Test Circuit
CDSCB10M7GA135-R0
1 2 3 4 5 6 7 8
123456789
18 17 16 15 14 13 12 11 10
9
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
Unit C
R
: F
: Ω
X: CDSCB10M7GA136-R0
0.1μ
2.2μ
1k
100k
3.3k
+0.1μ
100p
10k
PIC16F84 (Control IC)
TH7122
[Internal AFC Enabled]
(MELEXIS)
Vcc (5.0V)
0.01μ
0.01μ
0.1μ0.01μ 330p
330p 100k
330p
S.G. C.D.
FKS-OUT
AF-OUT
330p
330p
0.01μ
CDSCB10M7GA136-R0
16
Vcc (3V)
9101112131415
1 8765432
IF IN
AF OUT
0.01μ
33μ 0.01μ
R
10p
4.7μ
X
0.01μ
0.01μ
0.01μ
+
TA31161 (TOSHIBA)
X: CDSCB10M7GF072-R0
R: 820
Unit C
R
L
: F
: Ω
: H
CDSCB10M7GF072-R0
0.01μ
0.01μ
Vcc (3V)
12k
51k
1000p
8p
+
S.S.G.
R
D.C. OUT AF OUT
X
0.01μ
0.01μ
0.01μ
0.01μ
4.7μ
51
0.01μ
1.2μ
TK14588V (TOKO)
Unit C
R
L
: F
: Ω
: H
X: CDSCB10M7GF109-R0
R: 820
910111213141516
87654321
CDSCB10M7GF109-R0
Vcc (5.0V)
123456789101112
24 23 22 21 20 19 18 17 16 15 14 13
0.1μ
0.01μ
TA31275FN (TOSHIBA)
1000p
3300p
0.01μ
AF OUT
DC-OUT
0.01μ
0.01μ
0.1μ
0.1μ
0.1μ 1.8k
0.01μ
X: CDSCB10M7GF123-R0
Unit C
R
: F
: Ω
S.S.G.
CDSCB10M7GF123-R0
Vcc (5.0V)
12345678910
20 19 18 17 16 15 14 13 12 11
NJM2295AV (JRC)
0.01μ
DC-OUT
100p
0.01μ
10μ
0.01μ
10μ
180
8p
C.D.
0.01μ
X: CDSCB10M7GF126-R0
Unit C
R
: F
: Ω
S.G.
+
+
10μ
+
10μ
+
CDSCB10M7GF126-R0
49
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
15
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
c Recovered Audio Curve
CDSCB10M7GA105A-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 1.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA113-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±60kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA119-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±75kHz
= 1kHz
= 3.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA121-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
CDSCB10M7GA135-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
CDSCB10M7GA136-R0
Continued on the following page.
50
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
15
Continued from the preceding page.
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
100 10
1000 100
10 1
10.1
10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±80kHz
= 1kHz
= 3.0V
c Recovered Audio Curve
CDSCB10M7GF072-R0
Input
fdev.
fmod.
Vcc
= 100dBμ
= ±64kHz
= 1kHz
= 3.0V
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
1000
100
10
1
100
10
1
0.1
10.3 10.5 10.7 10.9 11.1
10.4 10.6 10.8 11.0
CDSCB10M7GF109-R0
Volt (V)
Frequency (MHz)
0.5
0.0
1.0
1.5
2.0
2.5
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
c S Curve
CDSCB10M7GF123-R0
Volt (V)
Frequency (MHz)
1.0
2.0
3.0
4.0
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
CDSCB10M7GF126-R0
51
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
15
Ceramic Discriminator 10.7MHz Applied IC Reference Table
Please see the following table to reference applied IC.
If you cannot find the IC part number you are seeking, please contact our sales representative.
ex. : CDSCB10M7GA105A-R0
Suffix Number
IC Manufacturer IC Part Number Suffix Number
TOSHIBA TA2003
TA2007
TA2008A / AN
TA2022
TA2057
TA2099N
TA2104AFN
TA2104F
TA2111N / F / FN
TA2132
TA2132BP
TA2142FN
TA2149AN
TA2149N
TA2154FN
TA2159F
TA31161
TA31275FN
TA7303P
TA7640AP
TA8122AN / AF
TA8132AN / AF
TB2132FN
031
033
045
050
057
082
080
080A
077
092
092D
102
100A
100
113
116
072
123
008
006
016
018
128
IC Manufacturer IC Part Number Suffix Number
ATMEL
INFINEON
Panasonic
Freescale
Renesas
NXP
ROHM
SAMSUNG
SANYO
SONY
T. I.
TOKO
U4313B
U4490B
TDA1576T
TDA6160X
AN7004
AN7232
MC13156
MC13158
μPC1391M
NE604
SA605
SA626
SA636DK
SA639
TDA1596T
TEA5710
TEA5757HL
TEA5762 / 5757
UAA3220TS
BA1448
BA4230AF
BA4234L
S1A0903
LA1225M
LA1814M
LA1823
LA1827M
LA1831
LA1832 / M
LA1833
LA1835 / M
LA1838 / M
LA7770
LV23000M
LV23100V
CX1691M
CX-20029
CXA1111
CXA1238
CXA1238N
CX1343M
CXA1376AM
CXA1538M / N / S
CXA1611
CX3067M
TRF6901
TK14570L
TK14583V
TK14588V
081
034V
051
038
011
053
049
073
056
020
042
047
096
085
120
040
105A
061
098
060
005
004
118A
108A
115
101
083
043
046
086
048
079
023
114
121
078
001
093
027
027N
032
054
069
075
076
119
122
112
109
52
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Place the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c CERAFILr 10.7MHz Chip Type SFECF Series
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reflow 30°C and below 60%R.H., and solder within 1
week.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
54
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
[Component Direction]
[Component Layout Close to Board]
Put the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Temperature (°C)
100
230
240
30 sec.
min.
30 sec.
max.
Peak
(240°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
56
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
c CERAFILr 10.7MHz Lead Type SFELF Series
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Soldering and Mounting
The component cannot withstand washing.
o Handling
1. Do not use this product with bend. The component may
be damaged if excess mechanical stress is applied to it
mounted on the printed circuit board.
2. Do not apply any type of reflow soldering on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
5. In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
6. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of
miscorrelation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
7. For safety purposes, avoid applying a direct current
between the terminals.
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid such places
where there are large temperature changes. Please store
the products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
57
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to degrade. To
prevent this, be extremely careful in determining
shape and dimension before designing the circuit
board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting chips with a soldering iron, the tip of
the soldering iron should not directly touch the chip
component.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Put the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
58
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
200
260
30 sec.
min.
60 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-170°C)
Heating
(200°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
Put the
component
laterally to the
direction in
which stress
acts.
[Component Layout Close to Board]
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series
60
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
61
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
2. Wash
(1) Reflow
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
(3) Other
s)MMERSION7ASH
2 minutes max. in above solvent at +60°C max.
s3HOWEROR2INSE7ASH
2 minutes max. in above solvent at +60°C max.
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
7ATER$EMINERALIZED7ATER#LEANING7ATER3OLUTION
(Cleanthrough-750H, Pine Alpha 100S), Silicon
4ECHNOCARE&27
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
(1) Cleaning Solvent
(2) Cleaning Conditions
s7HENCOMPONENTSAREIMMERSEDINSOLVENTBESURETO
maintain the temperature of components below the
temperature of solvent.
s0LEASEDONOTUSEULTRASONICCLEANING
s4OTALWASHINGTIMESHOULDBEMINUTESMAXIMUM
s0LEASEENSURETHECOMPONENTISTHOROUGHLYEVALUATEDIN
your application circuit.
s0LEASEDONOTUSECHLORINEPETROLEUMORALKALICLEANING
solvent.
s)FYOUPLANTOUSEANYOTHERTYPESOFSOLVENTSPLEASE
consult with Murata or a Murata representative prior to
using.
(3) Notice
o Soldering and Mounting
0EAK
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. SEC
max.
30 sec.
min.
120 sec.
min.
c CERAFILr 455kHz Chip Type SFPKA Series
62
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. If the component is cleaned, please confirm that the
reliability has not been degraded.
2. The components, packed in a moisture-proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
package cracks or reliability degradation caused by
thermal stress. When unpacked, store the component in
an atmosphere of below 25°C and below 65%R.H., and
solder within 48 hours.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
63
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Soldering and Mounting
The component cannot withstand washing.
o Handling
1. Do not use this product with bend. The component may
be damaged if excessive mechanical stress is applied to
it mounted on the printed circuit board.
2. All kinds of reflow soldering must not be applied on the
component.
3. Do not clean or wash the component as it is not
hermetically sealed.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
5. Conformal coating of the component is not acceptable
due to non-sealed construction.
6. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
7. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
c CERAFILr 455kHz Lead Type SFPLA/CFWLA/CFULA Series
64
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities.
Damage may result from excessive mechanical force.
Please make sure that you have evaluated by using
placement machines before going into mass production.
Do not use placement machines that utilize mechanical
positioning. Please contact Murata for details beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause
destruction resistance characteristics to degrade. To
prevent this, be extremely careful in determining
shape and dimension before designing the circuit
board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated to one positioning
accuracy, etc. Careful checking and maintenance are
necessary to prevent unexpected trouble.
(e) When correcting chips with a soldering iron, the tip of
the soldering iron should not directly touch the chip
component.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Put the
component
lateral to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
1. Product Storage Conditions
Please store the products in room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (Shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
products may be degraded in solderability due to storage
under poor conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to the storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in the places such as
a damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under the poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
66
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
Continued on the following page.
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered at +300±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
The component is recommended for use with placement
machines that employ optical placement capabilities. The
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(3) Conditions for Placement Machines
(a) The component may be damaged if excess
mechanical stress is applied to it mounted on the
printed circuit board.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. To prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent electrode erosion.
(4) Other
o Soldering and Mounting
Temperature (°C)
100
230
260
30 sec.
min.
40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
[Component Direction]
[Component Layout Close to Board]
Place the
component
laterally to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Notice
o Storage and Operating Conditions
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, avoid applying a direct current
between the terminals.
1. Product Storage Conditions
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
Humidity: 15 to 85% R.H.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because quality and solderability
may be degraded due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
(4) Please use the products immediately after package is
opened, because quality and solderability may be
degraded due to storage under poor conditions.
(5) To avoid cracking of ceramic element, please do not
drop the products.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Continued from the preceding page.
Do not clean or wash the component as it is not
hermetically sealed.
2. Wash
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
3. Coating
68
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Packaging
SFECF
SFECV/SFECK
SFELF
SFSKA
SFSKB
CFULA
CFWLA
SFPLA
TPSKA
CDSCB
3,000
3,000
1,000
1,000
3,000
CERAFILr<10.7MHz>
CERAFILr<2.3-6.5MHz>
CERAFILr<455kHz>
Ceramic Traps<4.5-6.5MHz>
Ceramic Discriminators<10.7MHz>
2,000
2,000
2,000
1,500 500
50
50
200
150
200
BoxMagazineBulkAmmo Pack
ø180mmø330mm
Taping
c Minimum Quantity
( ): Reference
(in mm)
Dimensions of Carrier Tape Dimensions of Reel
ø13.0±0.5
2.0±0.5
240 to 280
400 to 560
160 to 190
Empty
Components
Cover film
Empty
Trailer Leader
17.0±1.0
+1.0
-0
13.0
+0
-1.5
180
+1.0
-0
60
Chip filter
ø1.55±0.05
User direction of feed
Cover film
Peeling strength
(0.1 to 0.7N)
0.3±0.05
1.84±0.1
(0.05)
(3°)
10° max.
5.5±0.05
4.1±0.1
1.75±0.1
3° max.
4.1±0.1
4.0±0.1
2.0±0.05
4.0±0.1
3.35
12.0±0.2
+0.1
-0.05
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c CERAFILr 10.7MHz Chip Type SFECF Series
Dimensions of reel
( ) : Reference
(in mm)
ø13.0±0.5
2.0±0.5
17.0±1.0
240-280
400-560
160-190
Empty
Components
Cover film
Empty
Trailer Leader
1.7 +0.1
–0.05
12.0±0.2
0.3±0.05
7.3±0.01
5.5±0.05
1.75±0.1
1.9±0.1
10° max.
Peeling strength 0.1 to 0.7N
Cover film
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
User direction of feed
3.0±0.14.0±0.1
ø1.5 +0.1
–0.0 2.0±0.05 4.0±0.1
(3°)
∗
∗∗
∗
∗∗
∗
∗∗
∗
∗∗
∗
∗∗
Chip filter
Dimensions of carrier tape
13.0+1.0
–0
180+0
–1.5
60+1.0
–0
c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series
Continued on the following page.
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Packaging
Continued from the preceding page.
(in mm)
Lead length under the hold down tape
Length of cut-off
Pitch of components
Pitch of sprocket hole (1)
Length from hole center to lead
Length from hole center to component center
Lead spacing (1)
Lead spacing (2)
Slant forward or backward
Slant to the left or right
Width of carrier tape
Width of hold down tape
Position of sprocket hole
Gap of hold down tape and carrier tape
Distance between the center of sprocket
hole and lead stopper
Diameter of sprocket hole
Total tape thickness
Pitch of sprocket hole (2)
Item Code Dimensions Tolerance Remarks
L1
L2
P
P0
P1
P2
F
F1
dh
dS1
W
W0
W1
W2
H0
D0
t
P020
3.0 min.
2.0 max.
12.7
12.7
3.85
6.35
5.0
2.5
0
0
18.0
6.0 min.
9.0
0
18.0
ø4.0
0.6
254.0
To distinguish the direction
Hold down tape doesn't exceed
the carrier tape
The pitch of 20 sprocket holes
-
-
±0.5
±0.2
±0.5
±0.5
±0.2
±1.0
±1.0
±0.5
-
±0.5
±0.5
±0.2
±0.2
±1.5
+0.5
–0.2
+0.5
–0
P2P
P1
P0
F
F1F1
W
L1
L2
W0
W1
H0
W2
D0
t
dS1
dh dh
c CERAFILr 10.7MHz Lead Type SFELF Series
Continued on the following page.
70
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Packaging
Continued from the preceding page.
(in mm)
21.5±1.0
330±2
80±1
17.5±0.5
Empty
240 to 280 min.
400 to 560
160 to 190
ComponentsEmpty
Trailer Leader
Cover film
2.2±0.5
ø13.0±0.2
Dimensions of Reel
User direction of feed
Chip filter
Cover film
Peeling strength
(0.1 to 0.7N)
+0.1
–0.0
+0.1
–0.05
ø1.5 2.0±0.1 4.0±0.1
1.75±0.1
7.5±0.1
16.0±0.2
2.3±0.1
2.1
0.3±0.05
9.0±0.1
4.3±0.1
(3°)
10° max.
8.0±0.1
Dimensions of Carrier Tape
+0.1
–0.0
ø1.5
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE
c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series
(in mm)
17.5±1.5
(ø330)
(ø80)
13.5±1.0
Empty
240 to 280
400 to 560
160 to 190
ComponentsEmpty
Trailer Leader
Cover Film
2.2±0.2
ø13.0±0.2
Label
Dimensions of ReelDimensions of Carrier Tape
s0ART.UMBERMARKEDSIDEISALWAYSFACINGUPSIDE
∗∗∗
∗
1.6±0.1
8.0±0.1
5SERDIRECTIONOFFEED
4.2±0.1
Cover Film
+0.1
–0.0
ø1.5
2.0±0.1 4.0±0.1
5.6±0.1
5.5±0.1
12.0±0.2
1.75±0.1
c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series
Dimensions of Carrier Tape
User direction of feed
12.0±0.1
16.0±0.2
8.8±0.1
7.5±0.1 1.75±0.1
4.0±0.1
2.0±0.1
5.3±0.1
ø1.5
7.4±0.1
+0.1
-0
Cover film
(in mm)
Dimensions of Reel
Label
ø13.0±0.2
2.2±0.5
21.5±1.0
330±2
80±1
240 to 280
400 to 560
160 to 190
17.5±0.5
EmptyComponents
Cover film
Empty
Trailer Leader
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
c CERAFILr 455kHz Chip Type SFPKA Series
Continued on the following page.
71
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Packaging
Continued from the preceding page.
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "Murata" mark on a
magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note: Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Dimensions of Magazine Cassette
Material: Polycarbonate
Camber of Case: ±1mm max. against entire length (reference)
Twist of Case: ±0.5mm max. (reference)
(in mm)
Tolerance unless otherwise specified: ±0.2
HP51M0003-02
405±1.0
9.0±0.3
7.6±0.25
18.7±0.3
10±0.38.1±0.3
1.1 1.1
c CERAFILr 455kHz Lead Type SFPLA Series
Standard of Magazine Cassette
1. Putting CERAFILr into Magazine
A magazine should contain 50pcs of CERAFILr, with
ground terminals all facing toward the "Murata" mark on a
magazine, and be closed with exclusive stoppers at both
ends. Above should be the minimum packaging unit.
2. Quality of Magazine
(1) Transparent so that input / output direction is visually
recognizable.
(2) With an angle of 35° CERAFILr should slip down
smoothly.
(3) Antistatic finish
(4) Recycling
Note: Magazines should be sent back for recycling.
(Therefore, empty magazines should not be damaged.)
3. Magazine should be packaged in a cardboard box.
MURATA model name, quantity and outgoing inspection
number should be indicated on the box.
Cardboard box may contain maximum 33 magazines
(1,650 pieces of filter).
4. Dimensions of Magazine Cassette
Material: Polycarbonate
Camber of Case: ±1mm max. against entire length (reference)
Twist of Case: ±0.5mm max. (reference)
(in mm)
Tolerance unless otherwise specified: ±0.2
muRataHP51M0064
576.0±2.0
9.0±0.3
7.3±0.25
7.5±0.3
18.7±0.3
9.0±0.3
ANTISTATIC
5.3±0.3
0.6
c CERAFILr 455kHz Lead Type CFWLA Series
Continued on the following page.
72
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Packaging
Continued from the preceding page.
(in mm)
21.5±1.0
330±2
80±1
17.5±0.5
Empty
240 to 280 min.
400 to 560
160 to 190
ComponentsEmpty
Trailer Leader
Cover film
2.2±0.5
ø13.0±0.2
Dimensions of Reel
User direction of feed
Chip filter
Cover film
Peeling strength
(0.1 to 0.7N)
+0.1
–0.0
+0.1
–0.05
ø1.5 2.0±0.1 4.0±0.1
1.75±0.1
7.5±0.1
16.0±0.2
2.3±0.1
2.1
0.3±0.05
9.0±0.1
4.3±0.1
(3°)
10° max.
8.0±0.1
Dimensions of Carrier Tape
+0.1
–0.0
ø1.5
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE
c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series
4.0±0.1
Cover film
4.0±0.1
2.0±0.05
12.0±0.2
(9.0)
ø1.5+0.1
-0
ø1.5+0.1
-0
5.5±0.05
1.75±0.1
4.7±0.1
User direction of feed
s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP
0.3±0.05
MAX
1.1±0.1
(3°)
2.2±0.1
0EELINGSTRENGTH
0.1 to 0.7N 10°
Dimensions of reel
( ): Reference
(in mm)
ø13.0±0.2
2.0±0.5
17.0±1.0
180+0.1
-1.5
60+0.1
-0
240 to 280
400 to 560
160 to 190
%MPTY#OMPONENTS
Cover film
%MPTY
4RAILER ,EADER
13.0+1.0
-0
$IMENSIONSOF#ARRIER4APE
c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series
73
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Part Number Index
CDSCB
CFULA
CFWLA
SFECF
SFECK
SFECV
SFELF
SFPKA
SFPLA
SFSKA
SFSKB
TPSKA
Chip Ceramic Discriminators for FM
Ceramic Filters (CERAFILr) for AM
Ceramic Filters (CERAFILr) for AM
Chip Ceramic Filters (CERAFILr) for FM
Chip Ceramic Filters (CERAFILr) for FM
Chip Ceramic Filters (CERAFILr) for FM
Ceramic Filters (CERAFILr) for FM
Chip Ceramic Filters (CERAFILr) for AM
Ceramic Filters (CERAFILr) for AM
Chip Ceramic Filters (CERAFILr) for TV/VCR
Chip Ceramic Filters (CERAFILr) for TV/VCR
Chip Ceramic Traps
··········
··········
··········
··········
··········
··········
··········
··········
··········
··········
··········
··········
··········································
··········································
·······································
····································
·····································
·····································
·······················
·····································
·······································
·································
·································
·······················································
p47
p42
p40, 42
p5-6
p11
p11
p14, 17, 20-21, 23, 25, 27
p38
p40, 42
p31
p34
p45
74
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircra equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Tra c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of July
2012. They are subject to change or our products
in it may be discontinued without advance notice.
Please check with our sales representatives
or product engineers before ordering. If there
are any questions, please contact our sales
representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the e ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the e ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
