© Semiconductor Components Industries, LLC, 2009
July, 2009 − Rev. 14
1Publication Order Number:
NCP585/D
NCP585
Tri-Mode 300 mA CMOS
LDO Regulator with Enable
The NCP585 series of low dropout regulators are designed for
portable battery powered applications which require precise output
voltage accuracy, low quiescent current, and high ripple rejection.
These devices feature an enable function which lowers current
consumption significantly and are offered in the SOT23−5 and the
HSON−6 packages, in fixed output voltages between 0.8 V and 3.3 V.
This series of devices have three modes. Chip Enable (CE mode),
Fast Transient Mode (FT mode), and Low Power Mode (LP mode).
Both the FT and LP mode are utilized via the ECO pin.
Features
•Tri−mode Operation
•Low Dropout Voltage:
Typ 550 mV at 300 mA, Output Voltage = 0.9 V
Typ 480 mV at 300 mA, Output Voltage = 1.0 V
Typ 310 mV at 300 mA, Output Voltage = 1.5 V
•Excellent Line Regulation of 0.01%/V (0.05%/V LP Mode)
•Excellent Load Regulation of 15 mV (40 mV FT Mode)
•High Output Voltage Accuracy of "2% ("3% LP mode)
•Ultra−Low Iq Current of:
3.5 mA (LP mode, Output Voltage < 1.6 V)
80 mA (FT mode, Output Voltage < 1.8 V)
60 mA (FT mode, Output Voltage = 1.8 V)
•Very Low Shutdown Current of 0.1 mA
•Excellent Power Supply Rejection Ratio of 70 dB at f = 1.0 kHz
•Low Temperature Drift Coefficient on the Output Voltage of
"100 ppm/°C
•Fold Back Protection Circuit
•Input Voltage up to 6.5 V
•These are Pb−Free Devices
Typical Applications
•Portable Equipment
•Hand−Held Instrumentation
•Camcorders and Cameras
SOT23−5
SN SUFFIX
CASE 1212
http://onsemi.com
MARKING
DIAGRAMS
See detailed ordering and shipping information in the package
dimensions section on page 11 of this data sheet.
ORDERING INFORMATION
1
5
1
6
HSON−6
SAN SUFFIX
CASE 506AE
1
6
XXX
XTT
1
5
XXXTT
XXX = Specific Device Code
TT = Traceability Information
*Additional voltage options may be available between
0.8 V and 3.3 V in 100 mV steps.
NCP585
http://onsemi.com
2
+
-
Vin
Vref
Current Limit
CE
Vout
GND
ECO
Figure 1. Simplified Block Diagram for Active Low Figure 2. Simplified Block Diagram for Active High
+
-
Vin
Vref
Current Limit
CE
Vout
GND
ECO
+
-
Vin
Vref
Current Limit
CE
Vout
GND
ECO
Figure 3. Simplified Block Diagram for Active High
with Auto Discharge
PIN FUNCTION DESCRIPTION
HSON−6 SOT23−5Pin Name Description
1 1 Vin Power supply input voltage.
2−NC No Connect.
3 5 Vout Regulated output voltage.
4 4 ECO Mode alternative pin. (VECO = Vin for FT mode; VECO = GND for LP mode)
5 2 GND Power supply ground.
6 3 CE or CE Chip enable pin.
NCP585
http://onsemi.com
3
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage Vin 6.5 V
Input Voltage (CE or CE Pin) VCE −0.3 to 6.5 V
Input Voltage (ECO Pin) VECO −0.3 to 6.5 V
Output Voltage Vout −0.3 to Vin +0.3 V
Output Current Iout 350 mA
Power Dissipation SOT23−5
HSON−6
PD250
400
mW
ESD Capability, Human Body Model, C = 100 pF, R = 1.5 kWESDHBM 2000 V
ESD Capability, Machine Model, C = 200 pF, R = 0 WESDMM 150 V
Operating Ambient Temperature Range TA−40 to +85 °C
Maximum Junction Temperature TJ(max) 125 °C
Storage Temperature Range Tstg −55 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
ELECTRICAL CHARACTERISTICS (Vin = Vout + 1.0 V, TA = 25°C, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
Input Voltage Vin 1.4 −6.0 V
Output Voltage (1.0 mA ≤ Iout ≤ 30 mA)
VECO = Vin
VECO = GND
Vout Vout x 0.980
Vout x 0.970
−
−
Vout x 1.020
Vout x 1.030
V
Line Regulation (Iout = 30 mA, Vout + 0.5 V ≤ Vin ≤ 6.0 V)
FT Mode VECO = Vin
LP Mode VECO = GND
Regline
−
−
0.01
0.05
0.15
0.20
%/V
Load Regulation
FT Mode (1.0 mA ≤ Iout ≤ 300 mA), VECO = Vin
LP Mode (1.0 mA ≤ Iout ≤ 100 mA), VECO = GND
Regload
−
−
40
15
70
30
mV
Dropout Voltage (Iout = 300 mA)
Vout = 0.9 V
1.0 V v Vout v 1.25 V
1.5 V v Vout v 2.5 V
2.8 V v Vout v 3.3 V
VDO
−
−
−
−
ECO = H
0.55
0.48
0.31
0.23
ECO = L
0.59
0.51
0.32
0.24
ECO = H
0.78
0.70
0.45
0.35
ECO = L
0.80
0.75
0.48
0.375
V
Quiescent Current (Iout = 0 mA)
FT Mode, VECO = Vin
Vout < 1.8 V
Vout ≥ 1.8 V
LP Mode, VECO = GND
Vout < 1.6 V
Vout ≥ 1.8 V
Iq
−
−
−
−
80
60
3.5
4.5
111
90
8.0
9.0
mA
Output Current (Vin − Vout = 1.0 V) Iout 300 − − mA
Shutdown Current (VCE = Vin) ISD −0.1 1.0 mA
Output Short Circuit Current (Vout = 0 V) Ilim −50 −mA
Enable Input Threshold Voltage − High
Enable Input Threshold Voltage − Low
Vthenh
Vthenl
1.0
0.0
−
−
Vin
0.3
V
Output Noise Voltage (10 Hz − 100 kHz) Vn−30 −mVrm
s
N−Channel On Resistance for Auto Discharge RLow −60 −W
Ripple Rejection
(Iout = 50 mA, Vout = 0.9 V, Vin − Vout = 1.0 V)
f = 120 Hz
f = 1.0 kHz
f = 10 kHz
RR
−
−
−
75
70
65
−
−
−
dB
Output Voltage Temperature Coefficient
(Iout = 30 mA, −40°C ≤ TA ≤ 85°C)
DVout/
DT
−"100 −ppm/
°C
NCP585
http://onsemi.com
4
TYPICAL CHARACTERISTICS
0.8
0.1 2.1 3.1 4.1
INPUT VOLTAGE, Vin (V)
OUTPUT VOLTAGE, Vout (V)
Iout = 1.0 mA
5.1
0.7
0.6
0.5
0.4
0.3
0.2
0.1
Iout = 30 mA
Iout = 50 mA
6.1
Vout = 0.9 V
ECO = H
1.1
1.0
0.9
1.1
0.8
0.1 2.1 3.1 4.1
INPUT VOLTAGE, Vin (V)
OUTPUT VOLTAGE, Vout (V)
Iout = 1.0 mA
5.1
0.7
0.6
0.5
0.4
0.3
0.2
0.1
Iout = 30 mA
Iout = 50 mA
6.1
Vout = 0.9 V
ECO = L
1.1
1.0
0.9
1.1
1.4
0 200 400
OUTPUT CURRENT, Iout (mA)
OUTPUT VOLTAGE, Vout (V)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
600
1.6
1.4
0 200 400
OUTPUT CURRENT, Iout (mA)
OUTPUT VOLTAGE, Vout (V)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
600
1.6
Figure 4. Output Voltage vs. Output Current Figure 5. Output Voltage vs. Output Current
Figure 6. Output Voltage vs. Input Voltage Figure 7. Output Voltage vs. Input Voltage
Vin = Vout nominal +2.0 V
Vout = Vout nominal
ECO = H
Vin = Vout nominal +0.3 V
Vin = Vout nominal +2.0 V
Vin = Vout nominal +0.3 V
Vout = Vout nominal
ECO = L
Figure 8. Output Voltage vs. Input Voltage
1.9
0.3 2.3 3.3 4.3
INPUT VOLTAGE, Vin (V)
OUTPUT VOLTAGE, Vout (V)
Iout = 1.0 mA
5.3
1.5
1.3
1.1
0.9
0.7
0.5
0.3
Iout = 30 mA
Iout = 50 mA
6.3
Vout = 1.8 V
ECO = H
1.3
1.7
1.9
0.3 2.3 3.3 4.3
INPUT VOLTAGE, Vin (V)
OUTPUT VOLTAGE, Vout (V)
Iout = 1.0 mA
5.3
1.5
1.3
1.1
0.9
0.7
0.5
0.3
Iout = 30 mA
Iout = 50 mA
6.3
Vout = 1.8 V
ECO = L
1.3
1.7
Figure 9. Output Voltage vs. Input Voltage
NCP585
http://onsemi.com
5
TYPICAL CHARACTERISTICS
1.3 2.3 3.3 4.3
INPUT VOLTAGE, Vin (V)
5.3 6.3
8
7
6
5
4
3
2
1
0
0.3
Figure 10. Quiescent Current vs. Input Voltage
1.1 2.1 3.1 4.1
INPUT VOLTAGE, Vin (V)
5.1 6.1
8
7
6
5
4
3
2
1
0
0.1
Vout = 0.9 V
ECO = L
Figure 11. Quiescent Current vs. Input Voltage
1.3 2.3 3.3 4.3
INPUT VOLTAGE, Vin (V)
5.3 6.3
80
70
60
50
40
30
20
10
0
0.3
Figure 12. Quiescent Current vs. Input Voltage Figure 13. Quiescent Current vs. Input Voltage
70
0.1 2.1 3.1 4.1 5.1
60
50
40
30
20
10
0
6.1
Vout = 0.9 V
ECO = H
100
90
80
1.1
INPUT VOLTAGE, Vin (V)
QUIESCENT CURRENT, Iq (mA)
QUIESCENT CURRENT, Iq (mA)
QUIESCENT CURRENT, Iq (mA)
Vout = 1.8 V
ECO = H
QUIESCENT CURRENT, Iq (mA)
Vout = 1.8 V
ECO = L
Figure 14. Output Voltage vs. Temperature
−25 0 25 50
TEMPERATURE (°C)
OUTPUT VOLTAGE, Vout (V)
100
0.93
0.92
0.91
0.90
0.89
0.88
0.87
−50 75
Vout = 0.9 V
ECO = H
Figure 15. Output Voltage vs. Temperature
−25 0 25 50
TEMPERATURE (°C)
OUTPUT VOLTAGE, Vout (V)
100
0.93
0.92
0.91
0.90
0.89
0.88
0.87
−50 75
Vout = 0.9 V
ECO = L
NCP585
http://onsemi.com
6
TYPICAL CHARACTERISTICS
OUTPUT CURRENT, Iout (mA)
−25 0 25 50 100
1.22
1.21
1.20
1.19
1.18
1.17
1.16
−50
1.23
75
Vout = 1.2 V
ECO = H
−25 0 25 50
OUTPUT VOLTAGE, VDO (V)
100
1.22
1.21
1.20
1.19
1.18
1.17
1.16
−50
1.23
75
Vout = 1.2 V
ECO = L
50 100 150 200 300
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
0.7
250
0.8
Vout = 0.9 V
ECO = H
50 100 150 200
DROPOUT VOLTAGE, VDO (V)
300
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
0.7
250
0.8
Vout = 0.9 V
ECO = L
85°C
−40°C25°C
85°C
−40°C
25°C
Figure 16. Output Voltage vs. Temperature Figure 17. Output Voltage vs. Temperature
Figure 18. Dropout Voltage vs. Output Current
DROPOUT VOLTAGE, VDO (V)
TEMPERATURE (°C)
OUTPUT VOLTAGE, VDO (V)
TEMPERATURE (°C)
OUTPUT CURRENT, Iout (mA)
Figure 19. Dropout Voltage vs. Output Current
OUTPUT CURRENT, Iout (mA)
50 100 150 200
OUTPUT CURRENT, Iout (mA)
DROPOUT VOLTAGE, VDO (V)
250 300
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
Figure 20. Dropout Voltage vs. Output Current
Vout = 1.2 V
ECO = H
50 100 150 200 250 300
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
Figure 21. Dropout Voltage vs. Output Current
85°C
−40°C
25°C
DROPOUT VOLTAGE, VDO (V)
Vout = 1.2 V
ECO = L
85°C
−40°C
25°C
NCP585
http://onsemi.com
7
TYPICAL CHARACTERISTICS
FREQUENCY, f (kHz)
RIPPLE REJECTION, RR (dB)
Iout = 1.0 mA
Iout = 30 mA
Iout = 50 mA
OUTPUT CURRENT, Iout (mA)
50 100 150 200 250 300
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0
OUTPUT CURRENT, Iout (mA)
DROPOUT VOLTAGE, VDO (V)
Vout = 1.8 V
ECO = H
85°C
−40°C
25°C
50 100 150 200 250 300
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0
110
FREQUENCY, f (kHz)
RIPPLE REJECTION, RR (dB)
100
100
70
60
50
40
30
20
10
0
0
80
90
110 100
100
70
60
50
40
30
20
10
0
0
80
90
DROPOUT VOLTAGE, VDO (V)
Vout = 1.8 V
ECO = L
85°C
−40°C
25°C
Figure 22. Dropout Voltage vs. Output Current Figure 23. Dropout Voltage vs. Output Current
Figure 24. Ripple Rejection vs. Frequency Figure 25. Ripple Rejection vs. Frequency
Iout = 1.0 mA
Iout = 30 mA
Iout = 50 mA
Vout = 0.9 V
Vin = 1.9 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = H
Vout = 0.9 V
Vin = 1.9 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = L
Iout = 30 mA
110 100
100
70
60
50
40
30
20
10
0
0
80
90
Figure 26. Ripple Rejection vs. Frequency Figure 27. Ripple Rejection vs. Frequency
110 10
0
100
70
60
50
40
30
20
10
0
0
80
90
FREQUENCY, f (kHz)
RIPPLE REJECTION, RR (dB)
Iout = 1.0 mA
Iout = 50 mA
FREQUENCY, f (kHz)
RIPPLE REJECTION, RR (dB)
Iout = 1.0 mA
Iout = 30 mA
Iout = 50 mA
Vout = 1.2 V
Vin = 2.2 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = H
Vout = 1.2 V
Vin = 2.2 V + 0.2 Vp−p
Cout = 2.2 mF, ECO = L
NCP585
http://onsemi.com
8
TYPICAL CHARACTERISTICS
10 50
TIME, t (ms)
OUTPUT VOLTAGE, Vout (V)
100
0.98
0.96
0.94
0.92
0.90
0.88
0.86
0
Output Voltage
Input Voltage
20 6030 7040 80 90
4.1
2.1
1.1
0.1
−1.1
INPUT VOLTAGE, Vin (V)
3.1
ECO = H, Iout = 30 mA
Cout = Tantalum 1.0 mF
Vout = 0.9 V
0.4 2.0
TIME, t (ms)
4.0
3.1
2.6
2.1
1.6
1.1
0.6
0.1
0.0 0.8 2.41.2 2.81.6 3.2 3.6
4.1
2.1
1.1
0.1
−1.1
3.1
−2.1 −2.1
OUTPUT VOLTAGE, Vout (V)
Output Voltage
Input Voltage
INPUT VOLTAGE, Vin (V)
ECO = L, Iout = 30 mA
Cout = Tantalum 1.0 mF
Vout = 0.9 V
Figure 28. Input Transient Response
Time, t (ms)
OUTPUT VOLTAGE, Vout (V)
OUTPUT CURRENT, Iout (mA)
OUTPUT CURRENT, Iout (mA)
5101520 30
1.3
1.1
1.0
0.9
0.8
0.7
0254035
1.2
60
0
−30
−60
−90
−120
30
Time, t (ms)
OUTPUT VOLTAGE, Vout (V)
ECO = H, Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 2.2 mF
Vout = 0.9 V
Output Voltage
Load Current
5101520
Time, t (ms)
OUTPUT VOLTAGE, Vout (V)
30
1.3
1.1
1.0
0.9
0.8
0.7
0254035
1.2
150
50
0
−50
−100
−150
100
OUTPUT CURRENT, Iout (mA)
5101520 30
1.3
1.1
1.0
0.9
0.8
0.7
0254035
1.2
60
0
−30
−60
−90
−120
30
0.5 1.0 1.5 2.0 3.0
3.1
2.1
1.6
1.1
0.6
0.1
0 2.5 4.03.5
2.6
20
0
−10
−20
−30
−40
10
ECO = H, Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 1.0 mF
Vout = 0.9 V
Output Voltage
Load Current
Time, t (ms)
OUTPUT VOLTAGE, Vout (V)
OUTPUT CURRENT, Iout (mA)
ECO = H, Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 1.0 mF
Vout = 0.9 V
Output Voltage
Load Current
ECO = H, Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 1.0 mF
Vout = 0.9 V
Load Current
Output Voltage
Figure 29. Load Transient Response
NCP585
http://onsemi.com
9
TYPICAL CHARACTERISTICS
−0.2 0.2
TIME, t (ms)
CE INPUT VOLTAGE, VCE (V)
0.7
2.8
1.9
1.0
0.1
−1.0
−1.9
−2.8
−0.3 −.01 0.30 0.40.1 0.5 0.6
2.6
1.6
1.1
0.6
0.1
OUTPUT VOLTAGE, Vout (V)
2.1
−0.6
−20 20
TIME, t (ms)
CE INPUT VOLTAGE, VCE (V)
70
2.8
1.9
1.0
0.1
−1.0
−1.9
−2.8
−30 −10 3004010 50 60
2.6
1.6
1.1
0.6
0.1
OUTPUT VOLTAGE, Vout (V)
2.1
ECO = H
Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 1.0 mF
Iout = 300 mA
−0.6
VCE = 0 V → 1.9 V
ECO = L
Vin = 1.9 V
Cin = Tantalum 1.0 mF
Cout = Tantalum 1.0 mF
Iout = 300 mA
VCE = 0 V → 1.9 V
Figure 30. Turn−On Speed with CE Pin, Vout = 0.8 V
0.2 1.0
TIME, t (ms)
OUTPUT VOLTAGE, Vout (V)
0
0.91
−0.2
Iout = 200 mA
0.4 1.20.6 1.40.8 1.6 1.8
3.1
2.1
1.1
0.1
ECO INPUT VOLTAGE, VECO (V)
Iout = 100 mA
Iout = 50 mA
Iout = 10 mA
Iout = 1 mA
Iout = 300 mA
0.90
0.89
0.91
0.90
0.89
0.91
0.90
0.89
0.91
0.90
0.89
0.91
0.90
0.89
0.91
0.90
0.89
0.88
Vin = 1.9 V, Cin = Tantalum 1.0 mF, Cout = Tantalum 1.0 mF, Vout = 0.9 V
Figure 31. Output Voltage at Mode Alternative Point
VECO = 0 V to 1.9 V
NCP585
http://onsemi.com
10
TYPICAL CHARACTERISTICS
50 100
OUTPUT CURRENT (mA)
OUTPUT CAPACITOR ESR (W)
150
100000
1000
100
10
1
0.1
0.01
0
10000
Figure 32. Output Stability, Output Capacitor ESR
vs. Output Load Current (0.1 mF)
Figure 33. Output Stability, Output Capacitor
ESR vs. Output Load Current (1.0 mF)
Stable Region
Unstable
Region
Cout = 0.1 mF
Vout = 1.8 V
FT Mode
Figure 34. Output Stability, Output Capacitor
ESR vs. Output Load Current (10 mF)
Figure 35. Output Stability, Output Capacitor ESR
vs. Output Load Current (100 mF)
200 250 300 50 100
OUTPUT CURRENT (mA)
OUTPUT CAPACITOR ESR (W)
150
100000
1000
100
10
1
0.1
0.01
0
10000
Stable Region
Unstable
Region
200 250 300
50 100
OUTPUT CURRENT (mA)
OUTPUT CAPACITOR ESR (W)
150
100000
1000
100
10
1
0.1
0.01
0
10000
Stable Region
Unstable
Region
200 250 300 50 100
OUTPUT CURRENT (mA)
OUTPUT CAPACITOR ESR (W)
150
100000
1000
100
10
1
0.1
0.01
0
10000
Stable Region
Unstable
Region
200 250 300
No unstable region in LP Mode
Cout = 1.0 mF
Vout = 1.8 V
FT Mode
No unstable region in LP Mode
Cout = 10 mF
Vout = 1.8 V
FT Mode
No unstable region in LP Mode
Cout = 100 mF
Vout = 1.8 V
FT Mode
No unstable region in LP Mode
APPLICATION INFORMATION
Input Decoupling
A 1.0 mF ceramic capacitor is the recommended value to
be connected between Vin and GND. For PCB layout
considerations, the traces on Vin and GND should be
sufficiently wide in order to minimize noise and prevent
unstable operation.
Output Decoupling
It is best to use a 1.0 mF capacitor value on the Vout pin.
For better performance, select a capacitor with low
Equivalent Series Resistance (ESR). For PCB layout
considerations, place the output capacitor close to the
output pin and keep the leads short as possible.
NCP585
http://onsemi.com
11
ORDERING INFORMATION
Device Output Type / Features
Nominal
Output Voltage Marking Package Shipping†
NCP585DSAN09T1G Active High w/Auto Discharge,
LP and FT Mode
0.9 B09D HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585DSAN12T1G Active High w/Auto Discharge,
LP and FT Mode
1.2 B12D HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585DSAN18T1G Active High w/Auto Discharge,
LP and FT Mode
1.8 B18D HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585DSN09T1G Active High w/Auto Discharge,
LP and FT Mode
0.9 R09 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN12T1G Active High w/Auto Discharge,
LP and FT Mode
1.2 R12 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN125T1G Active High w/Auto Discharge,
LP and FT Mode
1.25 R01 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN15T1G Active High w/Auto Discharge,
LP and FT Mode
1.5 R15 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN18T1G Active High w/Auto Discharge,
LP and FT Mode
1.8 R18 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN25T1G Active High w/Auto Discharge,
LP and FT Mode
2.5 R25 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN28T1G Active High w/Auto Discharge,
LP and FT Mode
2.8 R28 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN30T1G Active High w/Auto Discharge,
LP and FT Mode
3.0 R30 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585DSN33T1G Active High w/Auto Discharge,
LP and FT Mode
3.3 R33 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585HSAN09T1G Active High,
LP and FT Mode
0.9 B09B HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585HSAN12T1G Active High,
LP and FT Mode
1.2 B12B HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585HSAN18T1G Active High,
LP and FT Mode
1.8 B18B HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585HSN09T1G Active High,
LP and FT Mode
0.9 Q09 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585HSN10T1G Active High,
LP and FT Mode
1.0 Q10 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585HSN12T1G Active High,
LP and FT Mode
1.2 Q12 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585HSN18T1G Active High,
LP and FT Mode
1.8 Q18 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585HSN30T1G Active High,
LP and FT Mode
3.0 Q30 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585LSAN09T1G Active Low,
LP and FT Mode
0.9 B09A HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585LSAN12T1G Active Low,
LP and FT Mode
1.2 B12A HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585LSAN18T1G Active Low,
LP and FT Mode
1.8 B18A HSON−6
(Pb−Free)
3000 Tape & Reel
NCP585LSN09T1G Active Low,
LP and FT Mode
0.9 P09 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585LSN12T1G Active Low,
LP and FT Mode
1.2 P12 SOT23−5
(Pb−Free)
3000 Tape & Reel
NCP585LSN18T1G Active Low,
LP and FT Mode
1.8 P18 SOT23−5
(Pb−Free)
3000 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Other voltages are available. Consult your ON Semiconductor representative.
NCP585
http://onsemi.com
12
PACKAGE DIMENSIONS
SOT23−5
SN SUFFIX
CASE 1212−01
ISSUE O
DIM MIN MAX
MILLIMETERS
A1 0.00 0.10
A2 1.00 1.30
B0.30 0.50
C0.10 0.25
D2.80 3.00
E2.50 3.10
E1 1.50 1.80
e0.95 BSC
e1 1.90 BSC
L
L1 0.45 0.75
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DATUM C IS A SEATING PLANE.
A
1
5
23
4
D
E1
B
L1
E
e
e1
C
M
0.10 C S
BS
A
B5X
A2
A1
S
0.05
C
L
0.20 ---
0.7
0.028
1.0
0.039
ǒmm
inchesǓ
SCALE 10:1
0.95
0.037
2.4
0.094
1.9
0.074
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
NCP585
http://onsemi.com
13
PACKAGE DIMENSIONS
HSON−6
SAN SUFFIX
CASE 506AE−01
ISSUE A
13
46
DAB
EE1
0.20 C
0.20 C
PIN ONE
REFERENCE
2 X
2 X
TOP VIEW
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION:
MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.10 AND 0.15 MM FROM TERMINAL.
4. COPLANARITY APPLIES TO THE
EXPOSED PAD AS WELL AS THE
TERMINALS.
b6 X
SEATING
PLANE
A
(A3)
L6 X
e
C
0.08 C
6 X
0.10 C
SIDE VIEW
D2
4
6
3
1
0.10 C
0.05 C
E2
A B
BOTTOM VIEW
NOTE 3
DIM MIN MAX
MILLIMETERS
A0.70 0.90
A3 0.15 REF
b0.20 0.40
D2.90 BSC
D2 1.40 1.60
E3.00 BSC
E1 2.80 BSC
E2 1.50 1.70
e0.95 BSC
L0.15 0.25
EXPOSED PAD
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over
time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
NCP585/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
a
Sales Representative
