1
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
DUAL IN-LINE PACKAGES
CRYSTAL CLOCK OSCILLATORS
-5.2 to -4.5Vdc & 1.8 to 15Vdc - 0.01Hz to 200MHz
Dual In-line Packages (Revision E, August 2010 ) (ECO# 9933)
Q-TECH
CORPORATION
Description
Q-Tech’s Dual In-line (DIP) crystal oscillators
consist of a source clock square wave generator, logic
output buffers and/or logic divider stages, and a
round AT high-precision quartz crystal built in a metal
through-hole package in DIP-8 or DIP-14
configurations.
Features
• Made in the USA
• ECCN: EAR99
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• USML Registration # M17677
• Wide frequency range from 0.01Hz to 200MHz
• Available as QPL MIL-PRF-55310/8, /11, /14, /15,
/16, /17, /18, /25, and /26
• Wide operating temperature range
• Choice of output logic options
• Supply voltages from 1.8Vdc to 15Vdc
• Lower or higher supply voltages available
• All metal hermetically sealed package
• Tight or custom symmetry available
• Fast rise and fall times
• Fast start-up time
• Capacitive load drive capability (Z output)
• Multiple outputs available
• Fundamental and third overtone designs
• High operating temperature up to +225ºC
• Custom design available tailors to meet customer’s
needs
• Q-Tech does not use pure lead or pure tin in its
products
• RoHS compliant
Applications
• Designed to meet today’s requirements for all
voltage applications
• Wide military clock applications
• Smart munitions
• Navigation
• Industrial controls
• Microcontroller driver
• Down-hole applications up to +225ºC
Ordering Information
Output frequency
Screened to
MIL-PRF-55310,level B
(Left blank if no screening)
1 = ± 100ppm at 0ºC to +70ºC
3(***) = ± 5ppm at 0ºC to +50ºC
4 = ± 50ppm at 0ºC to +70ºC
5 = ± 25ppm at -20ºC to +70ºC
6 = ± 50ppm at -55ºC to +105ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ± 100ppm at -40ºC to +85ºC
Tristate Option D
(Left blank if no Tristate)
For Non-Standard requirements, contact Q-Tech Corporation at Sales@Q-Tech.com
C = CMOS +5V to +15V (**)
AC = ACMOS +5V
HC = HCMOS +5V
T = TTL +5V
L = LVHCMOS +3.3V
N = LVHCMOS +2.5V
R = LVHCMOS +1.8V
E = 10K ECL -5.2V
EH = 10KH ECL -5.2V
EF = 100K/300K ECL -4.5V
PE = PECL +5V
LP = PECL +3.3V
Z = Z output
Specifications subject to change without prior notice.
All DIP packages are available in surface mount form.
Packaging Options
Other Options Available For An Additional Charge
• Standard packaging in black foam
• Optional anti-static plastic tube
• Lead forming available on all packages. Please contact for details.
• P. I. N. D. test (MIL-STD 883, Method 2020)
• Lead trimming
Frequency stability vs. temperature codes may not be available in all frequencies.
Q-Tech will assign a custom part number for custom specifications and all high
temperature applications with typical frequency stability at ± 250ppm up to +200ºC.
QT6HCD9M-20.000MHz
QT 6 HC D9M-20.000MHz
Sample part number
T = Standard
S = Solder Dip (*)
(**) Please specify supply voltage when ordering CMOS
(*** ) Requires an external capacitor
(*) Hot Solder Dip Sn60 per MIL-PRF 55310 is optional for an additional cost
Model #
(See page 3)