FFD 2.5" SCSI Specifications
Disk Capacity
Unformatted (MBytes): 128, 256, 384, 512, 768, 1024, 1280,
1536, 1792, 2048, 2304, 2560, 2816, 3072, 3328, 3584, 3840,
4096, 4352, 4608, 4864, 5120, 5376
The FFD 2.5” Ultra Narrow SCSI will be available in capacities
of up to 14GB.
SCSI Compatibility
Industry Standard SCSI-2, CCS. ANSI SCSI Standard
X3.131-1994. A SCSI-1 interface is available upon request
Performance
Burst Read/Write: 9.7 MByte/sec
Sustained Read: 3.6 MByte/sec
Sustained Write: 2.2 MByte/sec
Access time: <0.1 ms
Physical
Form factor: 2.5”
Mounting: Industry standard
Dimensions (mm)
17.0 mm height case: 100.2(L) X 69.8(W) X 17.0(H)
12.0 mm height case: 100.2(L) X 69.8(W) X 12.0(H)
8.0 mm height case: 100.2(L) X 69.8(W) X 8.0(H)
Weight
0.195 kg for a 5,376MB unit
Environmental
Operating temperature
Commercial: 0ºC to +70ºC
Enhanced: -25ºC to +75ºC
Extended: -40ºC to +85ºC
Storage temperature: -55ºC to +95ºC
Humidity: 5% to 95% relative, non-condensing
Operating altitude: Up to 80,000 ft
Operating shock: 1,500 G (half sine 0.5 ms), MIL-STD-810F
Operating vibration: 16.3 G RMS (random, 20 Hz to 2000 Hz;
3 vibration axes), MIL-STD-810F
Quick Security Erase
Entire disk erase: 10 sec (typical)
Power
Input vol tage: 5VDC ±5%
Power consumption
1.0GB unit: 545 mA (2.7 W)
5.3GB unit: 600 mA (3.0 W)
Compliance
CE, UL, FCC Class B, MIL-STD-810F
Reliability
MTBF: 4,545,475 hours MTBF for 128MB unit
2,631,586 hours MTBF for 512MB unit
2,173,922 hours MTBF for 1280MB unit
based on British-Telecom-HRD5, GB, 25°C
EDC/ECC: On-the-fly H/W+S/W embedded EDC/ECC
based on 48-bit Reed Solomon algorithm
BER (Bit Error Rate) <10-20
Reliability features
Built-in power-up self-test (BIT)
Manual and automatic self-diagnostics
TrueFFS® Bad Block Mapping (BBM) management
Data integrity under power-cycling
Endurance
Read unlimited
>5,000,000 Write/Erase cycles
TrueFFS® Dynamic Wear-Leveling
Garbage collection process
>10 years data retention
User Interface & Configuration
Configuration options
SCSI ID: 0-7
Write protect: On/Off
Termination power: On/Off
Termination On/Off
Firmware upgrade: Field upgrade capability
Electrical interface: 8-bit interface, SE (Single-Ended)
Transfer Modes: Sync (Fast)/Async
Format: Factory low-level format
Drivers: None required
Warranty
5 years (a longer warranty period can be supported)
Customization
PCB conformal coating
Customized case dimensions
Higher disk capacities
SCSI-I support
Hardware interrupt quick security erase
Read/write rate customization
Manufactured available in the USA & for FMF
Contact Us
USA: +1 -510-494-2090
Taiwan: +886-2-8770-6226
China: +86-755-2519-4732
Japan: +81-3-5423-8101
Europe: +972-9-764-5000
E-mail: ffd@m-sys.com
Web: http://www.m-sys.com
Ordering Information
FFD-250-SCSI-CCCCC-T-HXX
CCCCC: Unformatted capacity (MB) 512 to 5376
T: Temperature range
Blank – Commercial: 0°C to +70°C
N – Enhanced: -25°C to +75°C
X – Extended: -40°C to +85°C
H: Case height
Blank – 17 mm
H12 – 12 mm
H8 – 8 mm
Specifications subject to change without notice.
All rights reserved. TrueFFS® and FFD™ are
trademarks of M -Systems.
47-SR-001-04-8L Rev. 5.4 June 2003