1/16
XC61C Series
Low Voltage Detectors (VDF= 0.8V～1.5V)
Standard Voltage Detectors (VDF 1.6V～6.0V)
■GENERAL DESCRIPTION
The XC61C series are highly precise, low power consumption voltage detectors, manufactured using CMOS and laser
trimming technologies.
Detect voltage is extremely accurate with minimal temperature drift.
Both CMOS and N-ch open drain output configurations are available.
■
A
PPLICATIONS
●Microprocessor reset circuitry
●Memory battery back-up circuits
●Power-on reset circuits
●Power failure detection
●System battery life and charge voltage monitors
■TYPICAL PERFORMANCE CHAR
A
CTERISTICS
■FEATURES
Highly Accurate : ± 2%
:
± 1%(Standard Voltage VD: 2.6V~5.1V)
Low Power Consumption : 0.7μA (TYP.) [VIN=1.5V]
Detect Voltage Range : 0.8V ~ 6.0V in 0.1V increments
Operating Voltage Range : 0.7V ~ 6.0V (Low Voltage)
0.7V～10.0V (Standard Voltage)
Detect Volt age Temperature Characteristics
: ±100ppm/℃ (TYP.)
Output Configuration : N-ch open drain or CMOS
Packages : SSOT-24
SOT-23
SOT-89
Environmentally Friendly : EU RoHS Compliant, Pb Free
■TYPICAL APPLICATION CIRCUITS
ETR0201_016
2/16
XC61C Series
PIN NUMBER PIN NAME FUNCTIONS
SSOT-24 SOT-23 SOT-89
2 3 2 VIN Supply Voltage Input
4 2 3 VSS Ground
1 1 1 VOUT Output
3 - - NC No Connection
DESIGNATOR ITEM SYMBOL DESCRIPTION
① Output Configuration
C CMOS output
N N-ch open drain output
②③ Detect Voltage 08 ~ 60 e.g.0.9V → ②0, ③9
e.g.1.5V → ②1, ③5
④ Output Delay 0 No delay
⑤ Detect Accuracy
1 Within ±1% (VDF(T)=2.6V~5.1V)
2 Within ±2%
⑥⑦-⑧ (*1) Packages (Order Unit)
NR SSOT-24 (3,000pcs/Reel)
NR-G SSOT-24 (3,000pcs/Reel)
MR SOT-23 (3,000pcs/Reel)
MR-G SOT-23 (3,000pcs/Reel)
PR SOT-89 (1,000pcs/Reel)
PR-G SOT-89 (1,000pcs/Reel)
■PIN CONFIGURATION
■PIN ASSIGNMENT
■PRODUCT CLASSIFICATION
●Ordering Information
XC61C①②③④⑤⑥⑦-⑧(*1)
(*1) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
3/16
XC61C
Series
*1: Low voltage: VDF(T)=0.8V~1.5V
*2: Standard voltage: VDF(T)=1.6V~6.0V
PARAMETER SYMBOL RATINGS UNITS
Input Voltage *1 VIN VSS-0.3 ~ 9.0 V
*2 VSS-0.3 ~ 12.0
Output Current IOUT 50 mA
Output Voltage
CMOS
VOUT
VSS -0.3 ~ VIN +0.3
V
N-ch Open Drain Output *1 VSS -0.3 ~ 9.0
N-ch Open Drain Output *2 VSS -0.3 ~ 12.0
Power Dissipation
SSOT-24
Pd
150
mW
SOT-23 150
SOT-89 500
Operating Ambient Temperature Topr
-40～+85 ℃
Storage Temperature Tstg -55～+125 ℃
■BLOCK DIAGRAMS
■
A
BSOLUTE MAXIMUM RATINGS
Ta = 25 OC
(1) CMOS Output (2) N-ch Open Drain Output
4/16
XC61C Series
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX.
UNITS
CIRCUITS
Detect Voltage VDF
VDF(T)=0.8V~1.5V *1
VDF(T)=1.6V~6.0V *2
VDF(T)
x 0.98 VDF(T) VDF(T)
x 1.02 V 1
VDF(T)=2.6V~5.1V *2 VDF(T)
x 0.99 VDF(T) VDF(T)
x 1.01 V 1
Hysteresis Range VHYS VDF
x 0.02
VDF
x 0.05
VDF
x 0.08 V 1
Supply Current ISS
VIN = 1.5V - 0.7 2.3
μA2
VIN = 2.0V - 0.8 2.7
VIN = 3.0V - 0.9 3.0
VIN = 4.0V - 1.0 3.2
VIN = 5.0V - 1.1 3.6
Operating Voltage *1 VIN VDF(T) = 0.8V to 1.5V 0.7 - 6.0 V 1
Operating Voltage *2
VDF(T) = 1.6V to 6.0V 0.7 - 10.0
Output Current *1
IOUT
N-ch VDS = 0.5V VIN = 0.7V 0.10 0.80 -
mA
3
VIN = 1.0V 0.85 2.70 -
CMOS, P-ch VDS = 2.1V VIN = 6.0V - -7.5 -1.5 4
Output Current *2 N-ch VDS = 0.5V
VIN = 1.0V 1.0 2.2 -
3
VIN = 2.0V 3.0 7.7 -
VIN = 3.0V 5.0 10.1 -
VIN = 4.0V 6.0 11.5 -
VIN = 5.0V 7.0 13.0 -
CMOS, P-ch VDS = 2.1V VIN = 8.0V - -10.0 -2.0
4
Leakage
Current
CMOS
Output
(Pch) ILEAK
VIN=VDFx0.9, VOUT=0V - -10 -
nA 3
N-ch
Open
Drain
VIN=6.0V, VOUT=6.0V*1
VIN=10.0V, VOUT=10.0V*2 - 10 100
Temperature
Characteristics
ΔVDF/
(
Δ
Topr
･
V
DF
)
-40℃ ≦ Topr ≦ 85℃ - ±100 - ppm/
℃ 1
Delay Time
(V
DR
→
V
OUT
inversion)
tDLY Inverts from VDR to VOUT - 0.03 0.20 ms 5
■ELECTRICAL CHARACTERISTICS
VDF (T) = 0.8V to 6.0V ± 2%
VDF (T) = 2.6V to 5.1V ± 1%
NOTE:
*1: Low Voltage: VDF(T)=0.8V~1.5V
*2: Standard Voltage: VDF(T)=1.6V~6.0V
VDF (T): Nominal detect voltage
Release Voltage: VDR = VDF + VHYS
Ta=2 5℃
5/16
XC61C
Series
■OPERATIONAL EXPLANATION
(Especially prepared for CMOS output products)
① When input voltage (VIN) is higher than detect voltage (VDF), output voltage (VOUT) will be equal to VIN.
(A condition of high impedance exists with N-ch open drain output configurations.)
② When input voltage (VIN) falls below detect voltage (VDF), output voltage (VOUT) will be equal to the ground voltage (VSS)
level.
③ When input voltage (VIN) falls to a level below that of the minimum operating voltage (VMIN), output will become
unstable. (As for the N-ch open drain product of XC61CN, the pull-up voltage goes out at the output voltage.)
④ When input voltage (VIN) rises above the ground voltage (VSS) level, output will be unstable at levels below the
minimum operating voltage (VMIN). Between the VMIN and detect release voltage (VDR) levels, the ground voltage (VSS)
level will be maintained.
⑤ When input voltage (VIN) rises above detect release voltage (VDR), output voltage (VOUT) will be equal to VIN.
(A condition of high impedance exists with N-ch open drain output configurations.)
⑥ The difference between VDR and VDF represents the hysteresis range.
●Timing Chart
6/16
XC61C Series
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. For temporary, transitional voltage drop or voltage rising
phenomenon, the IC is liable to malfunction should the ratings be exceeded.
2. When a resistor is connected between the VIN pin and the power supply with CMOS output configurations, oscillation may
occur as a result of voltage drops at RIN if load current (IOUT) exists. (refer to the Oscillation Description (1) below)
3. When a resistor is connected between the VIN pin and the power supply with CMOS output configurations, irrespective of
N-ch open-drain output configurations, oscillation may occur as a result of through current at the time of voltage release even
if load current (IOUT) does not exist. (refer to the Oscillation Description (2) below )
4. Please use N-ch open drain output configuration, when a resistor RIN is connected between the VIN pin and power source.
In such cases, please ensure that RIN is less than 10kΩ and that C is more than 0.1μF, please test with the actual device.
(refer to the Oscillation Description (1) below)
5. With a resistor RIN connected between the VIN pin and the power supply, the VIN pin voltage will be getting lower than the
power supply voltage as a result of the IC's supply current flowing through the VIN pin.
6. In order to stabilize the IC's operations, please ensure that VIN pin input frequency's rise and fall times are more than 2 μ s/ V.
7. Torex places an importance on improving our products and its reliability.
However, by any possibility, we would request user fail-safe design and post-aging treatment on system or equipment.
●Oscillation Description
(1) Load current oscillation with the CMOS output configuration
When the voltage applied at power supply, release operations commence and the detector's output voltage increases.
Load current (IOUT) will flow at RL. Because a voltage drop (RIN x IOUT) is produced at the RIN resistor, located between the
power supply and the VIN pin, the load current will flow via the IC's VIN pin. The voltage drop will also lead to a fall in the
voltage level at the VIN pin. When the VIN pin voltage level falls below the detect voltage level, detect operations will
commence. Following detect operations, load current flow will cease and since voltage drop at RIN will disappear, the
voltage level at the VIN pin will rise and release operations will begin over again.
Oscillation may occur with this " release - detect - release " repetition.
Further, this condition will also appear via means of a similar mechanism during detect operations.
(2) Oscillation as a result of through current
Since the XC61C series are CMOS IC S, through current will flow when the IC's internal circuit switching operates (during
release and detect operations). Consequently, oscillation is liable to occur as a result of drops in voltage at the through
current's resistor (RIN) during release voltage operations. (refer to Figure 3)
Since hysteresis exists during detect operations, oscillation is unlikely to occur.
Power supply
Power supply Power supply
7/16
XC61C
Series
100kΩ*
8/16
XC61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS
●Low Voltage
Note : Unless otherwise stated, the N-ch open drain pull-up resistance value is 100kΩ.
9/16
XC61C
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●Low Voltage (Continued)
(4) N-ch Driver Output Current vs. V
DS
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
0.7V
V
IN
=0.8V
Ta=25℃
0
0.5
1.0
1.5
2.0
2.5
3.0
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
V
IN
=1.0V
Ta=25℃
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
0.7V
V
IN
=0.8V
Ta=25℃
0
2.0
4.0
6.0
8.0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
V
DS
(V)
V
IN
=1.4V
Ta=25℃
1.2V
1.0V
ＸＣ６１ＣＣ０９０２ (０.９Ｖ)
Output Current: I
OUT
(mA)Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
ＸＣ６１ＣＣ１１０２ (１.１Ｖ)
ＸＣ６１ＣＣ１５０２ (１.５Ｖ)ＸＣ６１ＣＣ１５０２ (１.５Ｖ)
(5) N-ch Driver Output Current vs. Input Voltage
0
0.5
1.0
1.5
2.0
2.5
0 0.2 0.4 0.6 0.8 1.0
V
DS
=0.5V
Ta=85℃
-40℃
25℃
0
1.0
2.0
3.0
4.0
5.0
0 0.2 0.4 0.6 0.8 1.0 1.2
V
DS
=0.5V Ta=-40℃
80℃
25℃
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
V
DS
=0.5V Ta=-40℃
85℃
25℃
ＸＣ６１ＣＣ０９０２ (０.９Ｖ)ＸＣ６１ＣＣ１１０２ (１.１Ｖ)ＸＣ６１ＣＣ１５０２ (１.５Ｖ)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Input Voltage: V
IN
(V) Input Voltage: V
IN
(V) Input Voltage: V
IN
(V)
(6) P-ch Driver Output Current vs. Input Voltage
0
2
4
6
8
10
12
0123456
V
DS
=2.1V
0.5V
Ta= 25 ℃
1.5V
1.0V
0
2
4
6
8
10
12
0123456
V
DS
=2.1V
0.5V
Ta= 2 5 ℃
1.5V
1.0V
0
2
4
6
8
10
12
0123456
V
DS
=2.1V
0.5V
Ta= 25℃
1.5V
1.0V
ＸＣ６１ＣＣ０９０２ (０.９Ｖ)ＸＣ６１ＣＣ１１０２ (１.１Ｖ)
Input Voltage: V
IN
(V) Input Voltage: V
IN
(V) Input Voltage: V
IN
(V)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
ＸＣ６１ＣＣ１５０２ (１.５Ｖ)
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
0.7V
V
IN
=0.8V
Ta=25℃
Output Current: I
OUT
(mA)
ＸＣ６１ＣＣ１１０２ (１.１Ｖ)
10/16
XC61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●Standard Voltage
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0246810
Ta=85℃
-40℃
25℃
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0246810
Ta=85℃
-40℃
25℃
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0246810
Ta=85℃
-40℃
25℃
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0246810
Ta=85℃
-40℃
25℃
ＸＣ６１ＣＣ１８０２ (１.８Ｖ ） ＸＣ６１ＣＣ２７０２ (２.７Ｖ)
ＸＣ６１ＣＣ３６０２ (３.６Ｖ)ＸＣ６１ＣＣ４５０２ (４.５Ｖ)
Input Voltage: V
IN
(V)Input Voltage: V
IN
(V)
Supply Current: I
SS
(μA)
Supply Current: I
SS
(μA)
Input Voltage: V
IN
(V)Input Voltage: V
IN
(V)
Supply Current: I
SS
(μA)
Supply Current: I
SS
(μA)
(2) Detect, Release Voltage vs. Ambient Temperature
1.75
1.80
1.85
1.90
-50 -25 0 25 50 75 100
Ambient Temperature : Ta (℃)
V
DR
V
DF
2.65
2.70
2.75
2.80
-50 -25 0 25 50 75 100
Ambient Temperature : Ta (℃)
V
DR
V
DF
3.5
3.6
3.7
3.8
-50 -25 0 25 50 75 100
Ambient Temperature : Ta (℃)
V
DR
V
DF
4.4
4.5
4.6
4.7
-50 -25 0 25 50 75 100
Ambient Temperature : Ta (℃)
V
DR
V
DF
ＸＣ６１ＣＣ１８０２ (１.８Ｖ)ＸＣ６１ＣＣ２７０２ (２.７Ｖ)
ＸＣ６１ＣＣ４５０２ (４.５Ｖ)ＸＣ６１ＣＣ３６０２ (３.６Ｖ)
Detect, Release Voltage: V
DF
,V
DR
(V)
Detect, Release Voltage: V
DF
,V
DR
(V)
Detect, Release Voltage: V
DF
,V
DR
(V)
Detect, Release Voltage: V
DF
,V
DR
(V)
(1) Supply Current vs. Input Voltage
11/16
XC61C
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●Standard Voltage (Continued)
(3) Output Voltage vs. Input Voltage
Note : The N-channel open drain pull up resistance value is 100k Ω.
0
1
2
3
0123
Ta=25℃
0
1
2
3
4
01234
Ta=25℃
0
1
2
3
4
5
012345
Ta=25℃
0
1
2
012
Ta=25℃
ＸＣ６１ＣＮ１８０２ （１.８V) ＸＣ６１ＣＮ２７０２ （２.７Ｖ)
Input Voltage: V
IN
(V)
Input Voltage: V
IN
(V)
Output Voltage: V
OUT
(V)Output Voltage: V
OUT
(V)
Output Voltage: V
OUT
(V) Output Voltage: V
OUT
(V)
ＸＣ６１ＣＮ４５０２ (４.５V)ＸＣ６１ＣＮ３６０２ (３.６V)
Input Voltage: V
IN
(V) Input Voltage: V
IN
(V)
(4) N-ch Driver Output Current vs. V
DS
0
2
4
6
8
10
0 0.5 1.0 1.5 2.0
V
DS
(V)
1.0V
V
IN
=1.5VTa=25℃
0
5
10
15
20
25
30
0 0.5 1.0 1.5 2.0 2.5 3.0
V
DS
(V)
1.
0
V
V
IN
=2.5V
Ta=25℃
1.5V
2.0V
0
10
20
30
40
0 0.5 1.0 1.5 2.0 2.5 3.0
V
DS
(V)
1.5V
V
IN
=3.0V
Ta=25℃
2.0V
2.5V
0
10
20
30
40
50
60
70
80
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
V
DS
(V)
V
IN
=4.0V
Ta=25℃
1.5V
2.0V
2.5V
3
.
0
V
3.5V
ＸＣ６１ＣＣ１８０２ (１.８Ｖ)ＸＣ６１ＣＣ２７０２ (２.７V)
ＸＣ６１ＣＣ４５０２ (４.５V)ＸＣ６１ＣＣ３６０２ (３.６Ｖ)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Note : The N-ch open drain pull up resistance value is 100kΩ.
0
10
20
30
40
50
60
70
80
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
V
DS
(V)
XC61CC4502 (4.5V品)
V
IN
=4.0V
Ta=25℃
1.5
V
2.0
V
2.5
V
3.0
V
3.5V
XC61CC4502 (4.5V)
12/16
XC61C Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●Standard Voltage (Continued)
(4) N-ch Driver Output Current vs. V
DS
0
200
400
600
800
1000
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
V
IN
=0.8V
0.7V
Ta=25℃
0
200
400
600
800
1000
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
V
IN
=0.8V
0.7V
Ta=25℃
0
200
400
600
800
1000
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
V
IN
=0.8V
0.7V
Ta=25℃
0
200
400
600
800
1000
0 0.2 0.4 0.6 0.8 1.0
V
DS
(V)
V
IN
=0.8V
0.7V
Ta=25℃
Output Current: I
OUT
(μA)
Output Current: I
OUT
(μA)
Output Current: I
OUT
(μA)
Output Current: I
OUT
(μA)
ＸＣ６１ＣＣ１８０２ (１.８V) ＸＣ６１ＣＣ２７０２ （２.７V)
ＸＣ６１ＣＣ３６０２ (３.６V) ＸＣ６１ＣＣ４５０２ (４.５V)
(5) N-ch Driver Output Current vs. Input Voltage
0
5
10
15
0 0.5 1.0 1.5 2.0
V
DS
=0.5V Ta=-40℃
85℃
25℃
0
5
10
15
20
25
0 0.5 1.0 1.5 2.0 2.5 3.0
V
DS
=0.5V Ta=-40℃
85℃
25℃
0
5
10
15
20
25
30
01234
V
DS
=0.5V Ta=-40℃
85℃
25℃
0
10
20
30
40
012345
V
DS
=0.5V Ta=-40℃
25℃
85℃
ＸＣ６１ＣＣ１８０２ (１.８V) ＸＣ６１ＣＣ２７０２ (２.７V)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Input Voltage: V
IN
(V)Input Voltage: V
IN
(V)
Input Voltage: V
IN
(V) Input Voltage: V
IN
(V)
ＸＣ６１ＣＣ３６０２ (３.６V) ＸＣ６１ＣＣ４５０２ (４.５V)
13/16
XC61C
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●Standard Voltage (Continued)
(6) P-ch Driver Output Current vs. Input Voltage
0
5
10
15
0246810
VDS=2.1V
0.5V
1.0V
1.5V
0
5
10
15
0246810
VDS=2.1V
0.5V
1.0V
1.5V
0
5
10
15
0246810
VDS=2.1V
0.5V
1.0V
1.5V
0
5
10
15
0246810
VDS=2.1V
0.5V
1.0V
1.5V
ＸＣ６１ＣＣ１８０２ (１.８V) ＸＣ６１ＣＣ２７０２ (２.７V)
ＸＣ６１ＣＣ４５０２ (４.５V)ＸＣ６１ＣＣ３６０２ (３.６V)
Input Voltage: V
IN
(V) Input Voltage: V
IN
(V)
Input Voltage: V
IN
(V)Input Voltage: V
IN
(V)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
Output Current: I
OUT
(mA)
14/16
XC61C Series
■PACKAGING INFORMATION
●SSOT-24 ●SOT-23
●SOT-89
2.0±0.1
0.125
+0.1
-0.05
1.3±0.2
0.25
+0.15
-0.1
0
+0.1
-0
0.35
+0.15
-0.1
0.05
0.25
+0.15
-0.1
0.25
+0.15
-0.1
2.5±0.1
4.0±0.25
1.5±0.1
(0.1) (0.4)
1.0±0.2
（0.4)
（1.85)
（0.25)
15/16
XC61C
Series
MARK CONFIGURATION VOLTAGE (V)
A CMOS 0.X
B CMOS 1.X
C CMOS 2.X
D CMOS 3.X
E CMOS 4.X
F CMOS 5.X
H CMOS 6.X
MARK CONFIGURATION VOLTAGE (V)
K N-ch 0.X
L N-ch 1.X
M N-ch 2.X
N N-ch 3.X
P N-ch 4.X
R N-ch 5.X
S N-ch 6.X
MARK
VOLTAGE (V) MARK VOLTAGE (V)
0 X.0 5 X.5
1 X.1 6 X.6
2 X.2 7 X.7
3 X.3 8 X.8
4 X.4 9 X.9
MARK DELAY TIME PRODUCT SERIES
3 No Delay Time XC61Cxxx0xxx
① represents integer of detect voltage and
CMOS Output (XC61CC series)
■MARKING RULE
● SSOT-24, SOT-23, SOT-89
①②④
12
34
① ② ③ ④
12
3
④③
②①
123
N-Channel O
p
en Drain Out
p
ut
(
XC61CN series
)
② represents decimal number of detect voltage
③ represents delay time
(Except for SSOT-24)
④ represents production lot number
Based on the internal standard. (G, I, J, O, Q, W excluded)
16/16
XC61C Series
1. The product and product specifications contained herein are subject to change without notice to
improve performance characteristics. Consult us, or our representatives before use, to confirm that
the information in this datasheet is up to date.
2. The information in this datasheet is intended to illustrate the operation and characteristics of our
products. We neither make warranties or representations with respect to the accuracy or
completeness of the information contained in this datasheet nor grant any license to any intellectual
property rights of ours or any third party concerning with the information in this datasheet.
3. Applicable export control laws and regulations should be complied and the procedures required by
such laws and regulations should also be followed, when the product or any information contained in
this datasheet is exported.
4. The product is neither intended nor warranted for use in equipment of systems which require
extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss
of human life, bodily injury, serious property damage including but not limited to devices or equipment
used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and
other transportation industry and 5) safety devices and safety equipment to control combustions and
explosions. Do not use the product for the above use unless agreed by us in writing in advance.
5. Although we make continuous efforts to improve the quality and reliability of our products;
nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent
personal injury and/or property damage resulting from such failure, customers are required to
incorporate adequate safety measures in their designs, such as system fail safes, redundancy and
fire prevention features.
6. Our products are not designed to be Radiation-resistant.
7. Please use the product listed in this datasheet within the specified ranges.
8. We assume no responsibility for damage or loss due to abnormal use.
9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex
Semiconductor Ltd in writing in advance.
TOREX SEMICONDUCTOR LTD.
