POWER
AGH150 Series
150 Watts
Total Power: 150 Watts
Input Voltage: 36 - 75 V
# of Outputs: Single
SPECIAL FEATURES
2:1 Wide input range
Optimised for high
density, small space applications
Low ripple and noise
Fixed switching frequency
High efciency
High capacitive load capability
Basic insulation system
Pre-bias start-up capability
Openframe structure
with Baseplate option
SAFETY
UL, cUL: UL60950
TUV/CE: IEC/EN60950
Electrical Specications
Input
Input ra nge: 36 - 75 VDC
Efficiency2: 92% @ 5Vo
Output
Voltage tolerance: +/-1%
Line regulation: +/- 0.2%
Load regulation: +/- 0.5%
Noise/ripple: 3.3 Vo: 100 mV
5.0 Vo: 100 mV
Over voltage protection:
Over temperature protection:
Auto-restart
Switching frequency: 280 KHz
Temperature coefficient: ±0.02/°C
Isolation
I/O isolation: 2000 VDC min.
Data Sheet
Environmental Specications
Operating ambient temperature range: -40°C to +85 °C
Storage temperature: -55 °C to +125 °C
Humidity: 5% to 95% (non-condensing)
MTBF: 2 Million hours
RoHS Compliant
AGH150 Series Data Sheet
Mechanical Drawings
Ordering Information
Model number Input voltage Output voltage Power
AGH150-48S05-6 36 - 75 Vin 5V @ 30A 150W
AGH150-48S05B-6 36 - 75 Vin 5V @ 30A 150W
AGH150-48S05P-6 36 - 75 Vin 5V @ 30A 150W
AGH150-48S05PB-6 36 - 75 Vin 5V @ 30A 150W
- Standard version is negative enable
- “-6” = 3.8mm pin length
- “-L” = Rohs6 compliance
- “ -P” = Positive enable
- “B” = Baseplate
AGH150 Series Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
www.artesyn.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use
of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc.
All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective
owners. © 2014 Artesyn Embedded Technologies, Inc. AGH150 DS Rev. 07.08.14
Notes:
1. All specications are subject to change without notice. Mechanical drawings are for reference only.
2. Warranty: 2 years
3. Label and logo appearance may vary from what is shown on mechanical drawings.
Pin Assignments
Pin # Function
1 +V in
2 Enable
3 Case
4 -V in
5 -V out
6 -Sense
7 Trim
8 +Sense
9 +V out
