TECHNICAL DATA SHEET
Microdot
RIGHT ANGLE PLUG
31S201-301E4
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Tel.: +49 8684 18-0
Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de
1 / 2
RF_35/12.04/3.0
All dimensions are in mm; tolerances acc. ISO 2768 m-H
Interface
mateable with MALCO microdot
Documents
Assembly instruction 55 B
Material and plating
Connector parts Material Plating
Center contact Brass Gold, min. 0.8 µm, over nickel
Outer contact Brass Gold, 0.1 µm min.
Dielectric PTFE
Crimping sleeve Copper Gold, 0.1 µm min.
Coupling nut Brass Gold, 0.1 µm min.
TECHNICAL DATA SHEET
Microdot
RIGHT ANGLE PLUG
31S201-301E4
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Tel.: +49 8684 18-0
Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de
2 / 2
RF_35/12.04/3.0
f(GHz)
Electrical data
Impedance 50 Ω
Frequency DC to 2 GHz
Return loss ≥ 16 dB, DC to 1 GHz
Insertion loss ≤ 0.15 x dB, DC to 1 GHz
Insulation resistance ≥ 5 x 10³ MΩ
Center contact resistance ≤ 3.0 mΩ
Outer contact resistance ≤ 3.0 mΩ
Dielectric Withstanding Voltage 1000 V rms
Contact Current 3 A DC max.
- Limitations are possible due to the used cable type -
Mechanical data
Mating cycles ≥ 500
Recommended coupling torque ≤ 90 Ncm
Environmental data
Temperature range -65°C to +125°C
Thermal shock MIL-STD-202, Meth. 107, Cond. B
Corrosion MIL-STD-202, Meth. 101, Cond. B
Vibration MIL-STD-202, Meth. 204, Cond. B
Shock MIL-STD-202, Meth. 213, Cond. H
Moisture resistance MIL-STD-202, Meth. 106
Tooling
Crimping tool 11W150-000
Crimp insert 11W150-101
Suitable cables
RG 196 A/U , RG 178 B/U
Packing
Standard 1 pce in bag
Weight 2.8 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Inge Mühlauer 15/03/05 Chr. Entsfellner 01/04/05 a00 04-0130 Rong Fang 31/03/05
While the information has been carefully compiled to the best of our knowledge, nothi
ng is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
