D Subminiature Connectors D Subminiature The ITT Cannon D Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical Contents Contents Page General Application D Subminiature Connectors Straight PCB Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 D*NG Pressfit Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 D*M Solder Termination (Machined) -- Standard PC Tails . . . . . . . . . . . . . . . . . . . . . . . 6 ZD* Solder Termination (Stamped). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 D* Solder Termination (Machined) -- European PC Tails . . . . . . . . . . . . . . . . . . . . . . . 10 D* Wrap Post Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 solution to any interconnect problem. Ideally suited for 90 PCB Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 D*M Solder Termination (Machined) -- Standard Footprint .318 or .283 inch . . . 16 ZED* Solder Termination (Stamped) -- Standard Footprint .318 inch . . . . . . . . . . . . . . 18 D* Solder Termination (Machined) -- European Footprint 10,2 or 9,4 mm. . . . . . 20 ZD* Solder Termination (Stamped) -- European Footprint 10,2 mm . . . . . . . . . . . . . . . 28 both commercial/industrial applications and military/ aerospace applications, Cable Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 D Solder Cup Solder Termination (Machined) with Tin Shells . . . . . . . . . . . . . . . . . . . . 32 ZD* Solder Cup Solder Termination (Stamped) with Tin Shells . . . . . . . . . . . . . . . . . . . 34 D*A Crimp Connectors without Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 D*W Discrete Wire IDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ITT Cannon D Subminiature connectors have found worldwide acceptance in a multitude of applications ranging from office equipment to satellites. Special Application D Subminiature Connectors Combo D Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Combo D PCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option) . . . . . . . . 44 Combo D PCB Connectors with High Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Combo D PCB Connectors with (Size 20) Signal Contacts Only. . . . . . . . . . . . . . . . . . 74 Combo D Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Combo D Cable Crimp Connectors and Shield Cans . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Loose Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Commercial Micro D Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 MDSM Connectors and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Filter D Selection Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 D*JK PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 D*JT Solder Cup and Combo High Power Connectors. . . . . . . . . . . . . . . . . . . . . . . . . 122 High Reliability D Subminiature Connectors Military/High Reliability Selection Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 PCB 90, Straight, Wrap Post, and Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . 132 MIL-C-24308 Cross References and Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Military/High Reliability Combo D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 Space/High Reliability Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PCB Straight, 90 and Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Cable Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 High Density Cable Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Space/High Reliability Combo D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Space Accessories and Loose (Size 8) Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 NASA/GSFC & ESA-SCC Cross References. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Accessories Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 Locking Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 On the Cover Filter D, Combo D, Commercial Micro D (MDSM), Pressfit D, and Standard D Reader's Resource Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Dimensional Reference Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Lease Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 Obsolete Products/Available Products Not Previously Listed . . . . . . . . . . . . . . . . . . . . 282 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Product Safety and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Combo D is a registered trademark of ITT Cannon in the United States. Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 1 D Subminiature Straight PCB Selection Guide D*NG - Straight Pressfit Termination See pages 4-5. The D*NG is based upon the specification CECC75-301-802. These connectors provide a low-cost alternative to traditional through hole solder contacts. Utilizing stamped ``Eye of the Needle'' compliant contact tails per IEC-352-5, the parts are quickly and easily mounted onto PCBs without soldering, crimping or specialized tooling. The socket contact engaging area utilizes a ``spoon'' shape with four points of interconnection. Hardware options provide flexibility and ensure that the final product fits the electrical requirements of any application. Product Features Quick and easy press-in installation without specialized tooling ``Spoon'' socket contact provides improved interface compared to ``Tuning Fork'' Closed-entry socket for secure blind mating Front-shell only design based on CECC 75-301-802 ``Eye of the Needle'' compliant contact tails Press-in bolt for ground continuity #4-40 UNC and M3 hardware options D*M Straight Solder Termination (Machined) -- Standard PC Tails D*M straight PCB connectors, equivalent to MIL-C-24308 qualified versions (except for finishes) for printed circuit boards and backplanes in demanding applications. Additional contact lengths, hardware and finish options available; consult factory for details. See pages 6-7. Product Features 7.5 A current capacity Machined contacts 2 contact finishes Optional vertical standoffs, screw locks, and boardlocks (4 prongs) UL file number E8572 Dimensionally compatible with Combo D ZD* - Straight Solder Termination (Stamped) ZD* straight connectors are available for applications where price is the primary driver. They are available with or without boardlocks and screw locks. Product Features Stamped contacts with 5 A current capacity Economical Optional vertical standoffs with optional harpoon style boardlocks or screw locks See pages 8-9. D* - Straight Solder Termination (Machined) -- European PC Tails D* straight connectors are available for high performance uses according to DIN 41652. Available with European length OL contacts. Select contact finish from 2 performance classes. See pages 10-11. Product Features High performance commercial connectors Two contact finish performance classes Optional vertical standoffs, threaded inserts and pushfits/boardlocks OL2 contact length, other lengths available Tin plated contact PC tails (pin & socket) Machined contacts D* - Wrap Post Termination D* straight connectors are available for high performance uses according to DIN 41652. Contacts available in two popular lengths. Product Features High performance commercial class connectors Two contact lengths for 2 or 3 wraps Machined contacts See pages 12-13. 2 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Specifications Current Rating Temperature Rating Contact Resistance Test Voltage X Plated Through Hole PC Tail Press-in Force PC Tail Push-out Force PC Board Thickness Materials and Finishes 5 A / 25C, 3.5 A / 70C ambient -55C to 125C 10 m 1200 Vrms at Sea Level 1,09 - 0,94 (.043 - .037) 100N/contact max. 30N/contact min. 3,20 - 1,60 (.125 - .062) Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage -55C to 125C 7.5 A 55 millivolt max at 7.5 A test current 1000 VAC at Sea Level -55C to 105C 5A 15 m 1000 VAC at Sea Level Hardware Steel/Copper Alloy Finish Tin None (color: black) Gold over Nickel (Standard) or Gold over PdNi (-408) Tin/Zinc Description Shell Insulator Contact Material Steel Thermoplastic, UL 94V-0 Copper Alloy Hardware Steel/Copper Alloy Finish Tin None (color: dark green) Gold over Nickel. Terminating end Tin (Socket only) Tin/Zinc Description Shell Insulator Contacts Hardware Material Steel Thermoplastic, UL 94-0 Copper Alloy Steel/Copper Alloy Finish Tin None (color: black) Gold over Nickel Tin/Zinc Materials and Finishes -55C to 125C 5A 10 m 1250 VAC at Sea Level Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Material Steel Thermoplastic, UL 94V-0 Copper Alloy Materials and Finishes Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Description Shell Insulator Contact Materials and Finishes Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Straight PCB Selection Guide Description Shell Insulator Contacts Material Steel Thermoplastic, UL 94V-0 Copper Alloy Hardware Steel/Copper Alloy Finish Tin None (color: dark green) Gold over Nickel in mating area, Tin on balance Tin/Zinc Materials and Finishes -55C to 125C 5A 10 m 1250 VAC at Sea Level Description Shell Insulator Contact Material Steel Thermoplastic, UL 94V-0 Socket: Copper Alloy Hardware Steel/Copper Alloy Finish Tin None (color: dark green) Gold over Nickel. Terminating end Tin (Socket) Tin/Zinc Dimensions are shown in mm (inch) Dimensions subject to change 3 D Subminiature D*NG Straight Pressfit Termination Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Through Hole DENG9P-P1 DANG15P-P1 DBNG25P-P1 DCNG37P-P1 DDNG50P-P1 Clinch Nut # 4-40 UNC DENGE9P-P1 DANGE15P-P1 DBNGE25P-P1 DCNGE37P-P1 DDNGE50P-P1 Clinch Nut M3 DENGX9P-P1 DANGX15P-P1 DBNGX25P-P1 DCNGX37P-P1 DDNGX50P-P1 Press-In Bolt # 4-40 UNC DENGZ9P-P1 DANGZ15P-P1 DBNGZ25P-P1 DCNGZ37P-P1 DDNGZ50P-P1 Press-In Bolt M3 DENGL9P-P1 DANGL15P-P1 DBNGL25P-P1 DCNGL37P-P1 DDNGL50P-P1 Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9P-P1-408. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. Engaging Face DD Configuration A C 2,84 (.112) B 10 1 2 3 4 5 6 7 5,69 (.224) 8 E D 9 10 11 12 13 14 15 5,70 0,20 (.224 .008) 2,15 (.085) MAX 5,60 (.220) MAX 2,84 (.112) 2,15 (.085) MAX 6,00 - 0,25 (.236 - .010) Dimensions A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) Shell Size DE DA DB DC DD B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) Mounting Types Through Hole 4 Clinch Nut Press-In Bolt Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*NG Straight Pressfit Termination Receptacle Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Through Hole DENG9S-P1 DANG15S-P1 DBNG25S-P1 DCNG37S-P1 DDNG50S-P1 Clinch Nut # 4-40 UNC DENGE9S-P1 DANGE15S-P1 DBNGE25S-P1 DCNGE37S-P1 DDNGE50S-P1 Clinch Nut M3 DENGX9S-P1 DANGX15S-P1 DBNGX25S-P1 DCNGX37S-P1 DDNGX50S-P1 Press-In Bolt # 4-40 UNC DENGZ9S-P1 DANGZ15S-P1 DBNGZ25S-P1 DCNGZ37S-P1 DDNGZ50S-P1 Press-In Bolt M3 DENGL9S-P1 DANGL15S-P1 DBNGL25S-P1 DCNGL37S-P1 DDNGL50S-P1 Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9S-P1-408. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. Engaging Face DD Configuration A 5,69 (.224) C 2,84 (.112) B 10 E D 2,15 (.085) MAX 5,70 0,20 (.224 .008) 5,60 (.220) MAX 2,84 (.112) 2,15 (.085) MAX 6,00 - 0,25 (.236 - .010) Dimensions A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) Shell Size DE DA DB DC DD B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) Mounting Types Through Hole Clinch Nut Press-In Bolt Dimensions are shown in mm (inch) Dimensions subject to change 5 D Subminiature D*M Straight Solder Termination (Machined) -- Standard PC Tails Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Standoff DEMV9PNK87 DAMV15PNK87 DBMV25PNK87 DCMV37PNK87 DDMV50PNK87 Standoff & Boardlock DEMZ9PNK87 DAMZ15PNK87 DBMZ25PNK87 DCMZ37PNK87 DDMZ50PNK87 Standoff, Boardlock & Screw Lock DEMN9PNK87 DAMN15PNK87 DBMN25PNK87 DCMN37PNK87 DDMN50PNK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN9PNK127 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C B POSITION 1 E D L Hardware removed for clarity 10 O 0,76 (.030) 2,92 (.115) 2,84 (.112) BOARDLOCK 4,52 (.178) STANDOFF # 4-40 UNC 7,62 0,25 (.300 .010) W 6,50 0,25 (.256 .010) SCREW LOCK # 4-40 UNC F Hardware removed for clarity Dimensions Shell Size DE DA DB DC DD 6 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*M Straight Solder Termination (Machined) -- Standard PC Tails Receptacle Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Standoff & Boardlock DEMZ9SNA197 DAMZ15SNA197 DBMZ25SNA197 DCMZ37SNA197 DDMZ50SNA197 Standoff DEMV9SNA197 DAMV15SNA197 DBMV25SNA197 DCMV37SNA197 DDMV50SNA197 Standoff, Boardlock & Screw Lock DEMN9SNA197 DAMN15SNA197 DBMN25SNA197 DCMN37SNA197 DDMN50SNA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN9SNK126 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C B POSITION 1 E D L 10 Hardware removed for clarity O 0,76 (.030) 2,92 (.115) BOARDLOCK 2,84 (.112) 4,52 (.178) STANDOFF # 4-40 UNC 7,62 0,25 (.300 .010) W 6,50 0,25 (.256 .010) SCREW LOCK # 4-40 UNC F Hardware removed for clarity Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 7 D Subminiature ZD* Straight Solder Termination (Stamped) Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Standoff With Boardlock ZDEE9P-OL2-146 ZDAE15P-OL2-146 ZDBE25P-OL2-146 ZDCE37P-OL2-146 ZDDE50P-OL2-146 Through Hole ZDE9P-OL2 ZDA15P-OL2 ZDB25P-OL2 ZDC37P-OL2 ZDD50P-OL2 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B POSITION 1 E D 10 0,64 (.025) REF 2,84 (.112) 3,18 (.125) MIN 4,32 (.170) REF 6,00 (.236) STANDOFF # 4-40 UNC W F 1,00 (.040) REF Hardware removed for clarity Dimensions Shell Size DE DA DB DC DD 8 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature ZD* Straight Solder Termination (Stamped) Receptacle Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Standoff With Boardlock ZDEE9S-OL2-146 ZDAE15S-OL2-146 ZDBE25S-OL2-146 ZDCE37S-OL2-146 ZDDE50S-OL2-146 Through Hole ZDE9S-OL2 ZDA15S-OL2 ZDB25S-OL2 ZDC37S-OL2 ZDD50S-OL2 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B POSITION 1 E D 10 0,64 (.025) REF 3,18 (.125) MIN 2,84 (.112) 4,32 (.170) REF 6,00 (.236) F STANDOFF # 4-40 UNC W 1,00 (.040) REF Hardware removed for clarity Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2,064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) Dimensions are shown in mm (inch) Dimensions subject to change 9 D Subminiature D* Straight Solder Termination (Machined) -- European PC Tails Plug Part Numbers Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (European), see page 227. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Standoff #4-40 UNC With Pushfit/Boardlock DEE9P-0L2-K87-146 DAE15P-0L2-K87-146 DBE25P-0L2-K87-146 DCE37P-0L2-K87-146 DDE50P-0L2-K87-146 Through Hole DE9P-0L2-K87 DA15P-0L2-K87 DB25P-0L2-K87 DC37P-0L2-K87 DD50P-0L2-K87 Standoff M3 With Pushfit/Boardlock DEX9P-0L2-K87-146 DAX15P-0L2-K87-146 DBX25P-0L2-K87-146 DCX37P-0L2-K87-146 DDX50P-0L2-K87-146 Note: For performance class 2 add -A191. Example DA15P-OL2-A191-K87. PC Tail Modifier OL2 OL4 X 0,30 (.012) 5,20 (.205) 6,75 (.266) Y 0,30 (.012) 10,20 (.401) 11,80 (.465) Engaging Face DD Configuration A 5,69 (.224) C O 3,05 (.120) 2,84 (.112) B POSITION 1 D E L 10 O 0,60 (.024) X 2,84 (.112) Y W F Dimensions Shell Size DE DA DB DC DD 10 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0.25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* Straight Solder Termination (Machined) -- European PC Tails Receptacle Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Layout 9 15 25 37 50 Through Hole DE9S-0L2-A197 DA15S-0L2-A197 DB25S-0L2-A197 DC37S-0L2-A197 DD50S-0L2-A197 Standoff #4-40 UNC With Pushfit/Boardlock DEE9S-0L2-A197-146 DAE15S-0L2-A197-146 DBE25S-0L2-A197-146 DCE37S-0L2-A197-146 DDE50S-0L2-A197-146 Standoff M3 With Pushfit/Boardlock DEX9S-0L2-A197-146 DAX15S-0L2-A197-146 DBX25S-0L2-A197-146 DCX37S-0L2-A197-146 DDX50S-0L2-A197-146 Note: For performance class 2 add -A191. Example DA15S-0L2-A191-A197 PC Tail Modifier OL2 OL4 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (European), see page 227. X 0,30 (.012) 5,20 (.205) 6,75 (.266) Y 0,30 (.012) 10,20 (.401) 11,80 (.465) Engaging Face DD Configuration A 5,69 (.224) C O 3,05 (.120) B POSITION 1 2,84 (.112) D E L 10 O 0,60 (.024) X 2,84 (.112) Y W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 11 D Subminiature D* Wrap Post Termination Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Modification Code F179 F179A Layout 9 15 25 37 50 Number of Wraps 2 3 X max. 10,21 (.402) 13,61 (.536) Through Hole DE9P-F179A-K87 DA15P-F179A-K87 DB25P-F179A-K87 DC37P-F179A-K87 DD50P-F179A-K87 Y 0,89 (.035) 15,20 (.598) 18,60 (.732) Engaging Face DD Configuration 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B POSITION 1 D E L 10 0,61 (.024) REF 2,84 (.112) X Y W F Dimensions Shell Size DE DA DB DC DD 12 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,64 (.269) 6,64 (.269) 6,64 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* Wrap Post Termination Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9S-F179A-A197 DA15S-F179A-A197 DB25S-F179A-A197 DC37S-F179A-A197 DD50S-F179A-A197 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 2-3. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Modification Code F179 F179A Number of Wraps 2 3 X max. 10,21 (.402) 13,61 (.536) Y 0,89 (.035) 15,20 (.598) 18,60 (.732) DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B POSITION 1 D E L 10 0,61 (.024) REF 2.84 (.112) X Y W F Dimensions Shell Size DE DA DB DC DD A 0,13 (.005) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 13 D Subminiature 90 PCB Selection Guide D*M -- 90 Solder Termination (Machined) -- Standard Footprint .318 or .283 inch D*M 90 PCB connectors, equivalent to MIL-C-24308 qualified versions (except for finishes), for use with printed circuit boards in demanding applications. Additional contact lengths, hardware and finish options available; consult factory for details. Product Features 7.5 A current capacity Machined contacts Two contact finishes Metal bracket with threaded insert standard Optional screw locks and boardlocks UL file number E8572 Dimensionally compatible with Combo D See pages 16-17. ZED* -- 90 Solder Termination (Stamped) -- Standard Footprint .318 inch ZED* 90 connectors are available for applications where price is the primary driver. They are available with integrated plastic brackets with Standard footprints. Product Features Stamped contacts with 5 A current capacity Economical Plastic bracket with integrated boardlocks and grounding strap Optional screw locks See pages 18-19. D* -- 90 Solder Termination (Machined) -- European Footprint 10,2 or 9,4 mm D* 90 connectors are available for high performance uses according to DIN 41652. Available with European footprint 1AON contacts, plastic and metal brackets, #4-40 or M3 threads and stamped pushfits/boardlocks. Contact finish available in 2 performance classes. See pages 20-27. Product Features High performance commercial class connectors Two contact performance classes Optional metal and plastic brackets, threaded standoffs, clinch nuts, and stamped pushfits/ boardlocks Tin plated contact PC tails (pin & socket) ZD* -- 90 Solder Termination (Stamped) -- European Footprint 10,2 mm ZD* 90 connectors are available for applications where price is the primary driver. They are available with integrated plastic brackets with European footprints. Product Features Stamped contacts with 5 A current capacity Economical Plastic bracket with integrated boardlocks and grounding strap Optional screw locks See pages 28-29. Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 14 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Specifications Temperature Rating -55C to 125C Current Rating 7.5 A Contact Resistance 55 millivolt max. at 7.5 A test current Dielectric Withstanding Voltage 1000 VAC at Sea Level Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Description Shell Insulator Pin Contact Socket Contact Material Steel Thermoplastic, UL 94V-0 Copper Alloy Copper Alloy Hardware (except Boardlocks) Boardlocks Steel Copper Alloy Finish Tin None (Color: dark green) Gold over Nickel Gold over Nickel in mating area, Tin on balance Tin Tin Materials and Finishes Finish Tin None Gold over Nickel in mating area, Tin on balance 10 m Description Shell Insulator Contacts Material Steel Thermoplastic, UL 94V-0 Copper Alloy 1250 VAC at Sea Level Hardware Boardlocks Steel or Plastic Copper Alloy Finish Tin None (Color: dark green) Gold over Nickel in mating area, Tin on balance Tin or None Tin 15 m Description Shell Insulator Contacts 1000 VAC at Sea Level -55C to +125C 5A Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Materials and Finishes Material Steel Thermoplastic, UL 94V-0 Copper Alloy -55C to 105C 5A Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage 90 PCB Selection Guide -55C to 105C 5A 15 m Materials and Finishes Materials and Finishes Description Shell Insulator Contacts Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel in mating area, Tin on balance 1000 VAC at Sea Level Dimensions are shown in mm (inch) Dimensions subject to change 15 D Subminiature D*M 90 Solder Termination (Machined) -- Standard Footprint .318 or .283 inch Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Layout 9 15 25 37 50 Bracket & Boardlock DEMCP9PJK87 DAMC15PJK87 DBMC25PJK87 DCMC37PJK87 DDMC50PJK87 Bracket DEMP9PJK87 DAMP15PJK87 DBMP25PJK87 DCMP37PJK87 DDMP50PJK87 Bracket, Boardlock & Screw Lock #4-40 UNC DEMG9PJK87 DAMG15PJK87 DBMG25PJK87 DCMG37PJK87 DDMG50PJK87 Bracket & Screw Lock #4-40 UNC DEMD9PJK87 DAMD15PJK87 DBMD25PJK87 DCMD37PJK87 DDMD50PJK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DAMG15PJK127 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. DD Configuration Engaging Face 2,84 (.112) A 5,68 (.224) C B E D 7,18 0,25 (.283 .010) 2,92 (.115) 10 O 0,76 (.030) L BOARDLOCK Screw lock and boardlock removed for clarity BRACKET, METAL M 4,33 0,38 (.170 .015) 2,84 (.112) 4,33 0,38 (.170 .015) RIVNUT #4-40 UNC N 7,18 0,25 (.283 .010) 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W Screw lock and boardlock removed for clarity Note: Dimension varies with alternate bracket configuration. See Reader's Resource page 226. Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W 0,25 (.010) 0,368 (.0145) 0,41 (.016) 10,72 (.422) 6,693 (.2635) -- 10,72 (.422) 6,693 (.2635) -- 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) M 0,25 (.010) 12,34 (.486) 12,34 (.486) 12,34 (.486) 12,34 (.486) 13,74 (.541) N 0,25 (.010) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,06 (.396) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 16 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*M 90 Solder Termination (Machined) -- Standard Footprint .318 or .283 inch Receptacle Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Layout 9 15 25 37 50 Bracket & Boardlock DEMC9SJA197 DAMC15SJA197 DBMC25SJA197 DCMC37SJA197 DDMC50SJA197 Bracket DEMP9SJA197 DAMP15SJA197 DBMP25SJA197 DCMP37SJA197 DDMP50SJA197 Bracket, Boardlock & Screw Lock #4-40 UNC DEMG9SJA197 DAMG15SJA197 DBMG25SJA197 DCMG37SJA197 DDMG50SJA197 Bracket & Screw Lock #4-40 UNC DEMD9SJA197 DAMD15SJA197 DBMD25SJA197 DCMD37SJA197 DDMD50SJA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DAMG15SJK126 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face DD Configuration 2,84 (.112) A 4,33 0,38 (.170 .015) 5,68 (.224) C B D E 7,18 0,25 (.283 .010) L 2,92 (.115) 10 O 0,76 (.030) Screw lock and boardlock removed for clarity BOARDLOCK BRACKET, METAL 4,33 0,38 (.170 .015) 2,84 (.112) RIVNUT #4-40 UNC M N 7,18 0,25 (.283 .010) 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W Screw lock and boardlock removed for clarity Note: Dimension varies with alternate bracket configuration. See Reader's Resource page 226. Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) M 0,25 (.010) 12,34 (.486) 12,34 (.486) 12,34 (.486) 12,34 (.486) 13,74 (.541) N 0,25 (.010) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,06 (.396) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 17 D Subminiature ZED* 90 Solder Termination (Stamped) -- Standard Footprint .318 inch Plug Part Numbers Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Shell Size DE DA DB DC Plastic Bracket, Integrated Grounding Strap, Boardlock, Threaded Insert #4-40 UNC ZEDEL9PBA ZEDAL15PBA ZEDBL25PBA ZEDCL37PBA Layout 9 15 25 37 Plastic Bracket, Integrated Grounding Strap, Boardlock, Screw Lock #4-40 UNC ZEDE9PBA ZEDA15PBA ZEDB25PBA ZEDC37PBA Note: For contacts with 30 microinches of gold add -30. Example: ZEDEL9PBA-30 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (Standard), see page 226. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 (.387 - .365) Engaging Face A C B 8,61 - 8,11 (.339 - .319) 18,45 - 17,69 (.726 - .696) 6,09 - 5,59 (.240 - .220) 12,93 - 12,17 (.509 - .479) 4,06 - 3,30 (.160 - .130) 10 2,84 (.112) 2X GROUNDING HOOK 8,33 - 7,83 (.328 - .308) Dimensions Shell Size DE DA DB DC 18 A 0,38 (.015) 30,89 (1.216) 39,09 (1.539) 53,09 (2.090) 69,40 (2.732) B 0,25 (.010) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,25 (.010) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature ZED* 90 Solder Termination (Stamped) -- Standard Footprint .318 inch Receptacle Part Numbers Shell Size DE DA DB DC Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Plastic Bracket, Integrated Grounding Strap, Boardlock, Threaded Insert #4-40 UNC ZEDEL9SBA ZEDAL15SBA ZEDBL25SBA ZEDCL37SBA Layout 9 15 25 37 Plastic Bracket, Integrated Grounding Strap, Boardlock, Screw Lock #4-40 UNC ZEDE9SBA ZEDA15SBA ZEDB25SBA ZEDC37SBA Note: For contacts with 30 microinches gold add -30. Example: ZEDEL9SBA-30 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (Standard), see page 226. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 ( .385 - .365) Engaging Face A C 8,15 - 7,65 (.321 - .301) B 18,71 - 17,95 (.737 - .707) 6,35 - 5,85 (.250 - .230) 12,93 - 12,17 (.509 - .479) 4,06 - 3,30 (.160 - .130) 10 2X GROUNDING HOOK 2,84 (.112) 8,33 - 7,83 (.328 - .308) Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,89 (1.216) 39,09 (1.539) 53,09 (2.090) 69,40 (2.732) B 0,25 (.010) 16,28 (.641) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,25 (.010) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change 19 D Subminiature D* 90 Solder Termination (Machined) -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9P-1AON-K87 DA15P-1AON-K87 DB25P-1AON-K87 DC37P-1AON-K87 DD50P-1AON-K87 Note: For performance class 2 add -A191. Example: DE9P-1A0N-A191-K87 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration A 2,54 (.100) 4,70 (.185) C 5,08 (.200) O 3,05 (.120) B D E L 9,40 (.370) 10 O 0,60 (.024) 4,70 (.185) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 20 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* 90 Solder Termination (Machined) -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9S-1AON-A197 DA15S-1AON-A197 DB25S-1AON-A197 DC37S-1AON-A197 DD50S-1AON-A197 Note: For performance class 2 add -A191. Example: DE9S-1AON-A191-A197 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A C 4,70 (.185) 5,08 (.200) O 3,05 (.120) B D E L 9,40 (.370) 10 O 0,60 (.024) 4,70 (.185) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 21 D Subminiature D* 90 Solder Termination (Machined) with Metal Bracket -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Shell Size DE DA DB DC DD Bushing with Through Hole DE9P-1AFN-K87 DA15P-1AFN-K87 DB25P-1AFN-K87 DC37P-1AFN-K87 DD50P-1AFN-K87 Layout 9 15 25 37 50 Captive Nut #4-40 UNC DE9P-1A7N-K87 DA15P-1A7N-K87 DB25P-1A7N-K87 DC37P-1A7N-K87 DD50P-1A7N-K87 Captive Nut M3 DE9P-1A9N-K87 DA15P-1A9N-K87 DB25P-1A9N-K87 DC37P-1A9N-K87 DD50P-1A9N-K87 Post #4-40 UNC DE9P-1A8N-K87 DA15P-1A8N-K87 DB25P-1A8N-K87 DC37P-1A8N-K87 DD50P-1A8N-K87 Notes: For pushfit/boardlock option add -146. Example: DE9P-1AFN-K87-146 For performance class 2 add -A191. Example: DE9P-1AFN-A191-K87 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. DD Configuration Engaging Face 2,54 (.100) 3,70 (.146) 5,08 (.200) 9,40 (.370) L 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0.38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0.25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 22 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* 90 Solder Termination (Machined) with Metal Bracket -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Bushing with Through Hole DE9S-1AFN-A197 DA15S-1AFN-A197 DB25S-1AFN-A197 DC37S-1AFN-A197 DD50S-1AFN-A197 Captive Nut #4-40 UNC DE9S-1A7N-A197 DA15S-1A7N-A197 DB25S-1A7N-A197 DC37S-1A7N-A197 DD50S-1A7N-A197 Captive Nut M3 DE9S-1A9N-A197 DA15S-1A9N-A197 DB25S-1A9N-A197 DC37S-1A9N-A197 DD50S-1A9N-A197 Post #4-40 UNC DE9S-1A8N-A197 DA15S-1A8N-A197 DB25S-1A8N-A197 DC37S-1A8N-A197 DD50S-1A8N-A197 Notes: For pushfit/boardlock option add -146. Example: DE9S-1AFN-A197-146 For performance class 2 add -A191. Example: DE9S-1AFN-A191-A197 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) 3,70 (.146) 5,08 (.200) L 9,40 (.370) 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 23 D Subminiature D* 90 Solder Termination (Machined) with Plastic Bracket and Grounding Strap -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9P-1ADN-K87 DA15P-1ADN-K87 DB25P-1ADN-K87 DC37P-1ADN-K87 DD50P-1ADN-K87 Captive Nut #4-40 UNC DE9P-1AWN-K87 DA15P-1AWN-K87 DB25P-1AWN-K87 DC37P-1AWN-K87 DD50P-1AWN-K87 Captive Nut M3 DE9P-1AVN-K87 DA15P-1AVN-K87 DB25P-1AVN-K87 DC37P-1AVN-K87 DD50P-1AVN-K87 Post #4-40 UNC DE9P-1AJN-K87 DA15P-1AJN-K87 DB25P-1AJN-K87 DC37P-1AJN-K87 DD50P-1AJN-K87 Notes: For pushfit/boardlock option add -146. Example: DE9P-1ADN-K87-146 For performance class 2 add -A191. Example: DE9P-1ADN-A191-K87 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D L 9,40 (.370) 1,00 (.039) 10 O 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING STRAP 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0.38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 24 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* 90 Solder Termination (Machined) with Plastic Bracket and Grounding Strap -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9S-1ADN-A197 DA15S-1ADN-A197 DB25S-1ADN-A197 DC37S-1ADN-A197 DD50S-1ADN-A197 Captive Nut #4-40 UNC DE9S-1AWN-A197 DA15S-1AWN-A197 DB25S-1AWN-A197 DC37S-1AWN-A197 DD50S-1AWN-A197 Captive Nut M3 DE9S-1AVN-A197 DA15S-1AVN-A197 DB25S-1AVN-A197 DC37S-1AVN-A197 DD50S-1AVN-A197 Post #4-40 UNC DE9S-1AJN-A197 DA15S-1AJN-A197 DB25S-1AJN-A197 DC37S-1AJN-A197 DD50S-1AJN-A197 Notes: For pushfit/boardlock option add -146. Example: DE9S-1ADN-A197-146 For performance class 2 add -A191. Example: DE9S-1ADN-A191-A197 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10 O 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING STRAP 2,54 (.100) 3,70 (.146) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0.38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 25 D Subminiature D* 90 Solder Termination (Machined) with Plastic Bracket -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9P-1A5N-K87 DA15P-1A5N-K87 DB25P-1A5N-K87 DC37P-1A5N-K87 DD50P-1A5N-K87 Captive Nut #4-40 UNC DE9P-1AUN-K87 DA15P-1AUN-K87 DB25P-1AUN-K87 DC37P-1AUN-K87 DD50P-1AUN-K87 Captive Nut M3 DE9P-1ATN-K87 DA15P-1ATN-K87 DB25P-1ATN-K87 DC37P-1ATN-K87 DD50P-1ATN-K87 Post #4-40 UNC DE9P-1A6N-K87 DA15P-1A6N-K87 DB25P-1A6N-K87 DC37P-1A6N-K87 DD50P-1A6N-K87 Notes: For pushfit/boardlock option add -146. Example: DE9P-1A5N-K87-146 For performance class 2 add -A191. Example: DE9P-1A5N-A191-K87 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration A 2,54 (.100) C 3,70 (.146) 5,08 (.200) B E D 9,40 (.370) L 1,00 (.039) 10 O 0,60 (.024) BRACKET, PLASTIC 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 26 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* 90 Solder Termination (Machined) with Plastic Bracket -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DE9S-1A5N-A197 DA15S-1A5N-A197 DB25S-1A5N-A197 DC37S-1A5N-A197 DD50S-1A5N-A197 Captive Nut #4-40 UNC DE9S-1AUN-A197 DA15S-1AUN-A197 DB25S-1AUN-A197 DC37S-1AUN-A197 DD50S-1AUN-A197 Captive Nut M3 DE9S-1ATN-A197 DA15S-1ATN-A197 DB25S-1ATN-A197 DC37S-1ATN-A197 DD50S-1ATN-A197 Post #4-40 UNC DE9S-1A6N-A197 DA15S-1A6N-A197 DB25S-1A6N-A197 DC37S-1A6N-A197 DD50S-1A6N-A197 Notes: For push/boardlock option add -146. Example: DE9S-1A5N-A197-146 For performance class 2 add -A191. Example: DE9S-1A5N-A191-A197 Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10 O 0,60 (.024) BRACKET, PLASTIC 2,54 (.100) 3,70 (.146) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 27 D Subminiature ZD* 90 Solder Termination (Stamped) -- European Footprint 10,2 mm Plug Part Numbers Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Shell Size DE DA DB DC Plastic Bracket, Integrated Grounding Strap, Boardlock, Threaded Insert #4-40 UNC ZDEL9P-1AKN-146 ZDAL15P-1AKN-146 ZDBL25P-1AKN-146 ZDCL37P-1AKN-146 Layout 9 15 25 37 Plastic Bracket, Integrated Grounding Strap, Boardlock, Screw Lock #4-40 UNC ZDE9P-1AKN-146 ZDA15P-1AKN-146 ZDB25P-1AKN-146 ZDC37P-1AKN-146 Note: For contacts with 30 microinches gold add -A191. Example: ZDEL9P-1AKN-A191-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 (.387 - .365) Engaging Face A C B 8,61 - 8,11 (.339 - .319) 12,93 - 12,17 (.509 - .479) 1,00 (.039) 10 2X GROUNDING HOOK Dimensions Shell Size DE DA DB DC 28 A 0,38 (.015) 30,89 (1.216) 39,09 (1.539) 53,09 (2.090) 69,40 (2.732) B 0,25 (.010) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature ZD* 90 Solder Termination (Stamped) -- European Footprint 10,2 mm Receptacle Part Numbers Shell Size DE DA DB DC Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 14-15. Plastic Bracket, Integrated Grounding Strap, Boardlock, Threaded Insert #4-40 UNC ZDEL9S-1AKN-146 ZDAL15S-1AKN-146 ZDBL25S-1AKN-146 ZDCL37S-1AKN-146 Layout 9 15 25 37 Plastic Bracket, Integrated Grounding Strap, Boardlock, Screw Lock #4-40 UNC ZDE9S-1AKN-146 ZDA15S-1AKN-146 ZDB25S-1AKN-146 ZDC37S-1AKN-146 Note: For contacts with -A191 microinches gold add -A191. Example: ZDEL9S-1AKN-A191-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. 2X SCREW LOCK #4-40 UNC 9,77 - 9,27 ( .385 - .365) Engaging Face A C 8,15 - 7,65 (.321 - .301) B 12,93 - 12,17 (.509 - .479) 1,00 (.039) 10 2X GROUNDING HOOK Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,89 (1.216) 39,09 (1.539) 53,09 (2.090) 69,40 (2.732) B 0,25 (.010) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) Dimensions are shown in mm (inch) Dimensions subject to change 29 D Subminiature Cable Selection Guide D* -- Solder Cup Termination (Machined) with Tin Shells D* solder cup connectors are used for cable or panel mount wiring applications. Solder cup connectors provide maximum flexibility and performance for applications requiring discrete solder terminations and field repair without termination tooling. Product Features Machined solder cup termination, 5 A current capacity High performance commercial class connectors Two contact performance classes Optional clinch nuts with #4-40 UNC or M3 threads See pages 32-33. ZD* -- Solder Cup Termination (Stamped) with Tin Shells ZD* solder cup connectors are used for cable or panel mount wiring applications. Solder cup connectors provide maximum flexibility and performance for applications requiring discrete solder terminations. Product Features Stamped solder cup termination, 5 A current capacity Economical See pages 34-35. D*A -- Crimp Connectors without Contacts D*A crimp contact connectors are designed for reliable, fast cabling. Available in the industry standard D*A housing, the connectors provide a low-cost, quick cabling alternative compared to soldering. Product Features The D*W connector provides insulation displacement connection technology for either solid or stranded wires. With D*W, speed of cabling is increased significantly over solder cup or crimp solutions. Contacts are easily removable and replaceable. Several specialized accessories (including shield cans, ferrules, and plastic boots) are available to provide a complete product solution. Product Features Crimp contacts available in reels of 5,000 Application tooling: - Hand or automatic - Stripper crimper See pages 36-37. D*W -- Discrete Wire IDC Quick harnessing capability with simple hand or semi-automatic tooling Accepts 30 AWG to 20 AWG wire; sizes can be mixed Shield cans insure reliable shielding continuity See pages 38-41. 30 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage -55C to 125C 5A 10 m -55C to 105C 5A 15 m Description Shell/Hardware Insulator Contacts Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel in mating area, Tin on balance Materials and Finishes Description Shell Insulator Contacts 1000 VAC at Sea Level Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Materials and Finishes 1250 VAC Specifications Temperature Rating Current Rating Contact Resistance Dielectric Withstanding Voltage Cable Selection Guide -55C to 105C 5 A (20 AWG) 15 m Materials and Finishes Description Shell/Hardware Insulator Contacts 500 VAC at Sea Level Specifications Temperature Rating -55C to 125C Current Rating 3 A (20 AWG) 2 A (22 AWG) 1,4 A (24 AWG) 1,2 A (26 AWG) 1 A (28 AWG) 0,8 A (30 AWG) Contact Resistance 15 m Dielectric Withstanding Voltage 1000 VAC at Sea Level Materials and Finishes Description Shell/Hardware Insulator Contacts Dimensions are shown in mm (inch) Dimensions subject to change 31 D Subminiature D* Solder Cup Termination (Machined) with Tin Shells Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Layout 9 15 25 37 50 Clinch Nut #4-40 UNC DEE9PK87 DAE15PK87 DBE25PK87 DCE37PK87 DDE50PK87 Through Hole DE9PK87 DA15PK87 DB25PK87 DC37PK87 DD50PK87 Clinch Nut M3 DEX9PK87 DAX15PK87 DBX25PK87 DCX37PK87 DDX50PK87 Note: For performance class 2, add A191. Example: DA15PA191K87. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration A 5,69 (.224) C O 3,05 (.120) B 2,84 (.112) POSITION 1 D E L 10 2,84 (.112) 10,72 (.422) MAX W L F Dimensions Shell Size DE DA DB DC DD 32 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D* Solder Cup Termination (Machined) with Tin Shells Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Clinch Nut #4-40 UNC DEE9SA197 DAE15SA197 DBE25SA197 DCE37SA197 DDE50SA197 Through Hole DE9SA197 DA15SA197 DB25SA197 DC37SA197 DD50SA197 Clinch Nut M3 DEX9SA197 DAX15SA197 DBX25SA197 DCX37SA197 DDX50SA197 Note: For performance class 2, add A191. Example: DA15SA191A197. Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Engaging Face DD Configuration A C 5,69 (.224) O 3,05 (.120) B 2,84 (.112) POSITION 1 D E L 10 2,84 (.112) 9,91 (.390) MAX L W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 33 D Subminiature ZD* Solder Cup Termination (Stamped) with Tin Shells Plug Part Numbers Shell Size DE DA DB DC DD Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face Layout 9 15 25 37 50 Through Hole ZDE9P ZDA15P ZDB25P ZDC37P ZDD50P DD Configuration A 5,69 (.224) C 2,84 (.112) B O 3,05 (.120) POSITION 1 K E D L 10 2,84 (.112) 10,72 (.422) MAX W F Dimensions Shell Size DE DA DB DC DD 34 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature ZD* Solder Cup Termination (Stamped) with Tin Shells Receptacle Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole ZDE9S ZDA15S ZDB25S ZDC37S ZDD50S Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face DD Configuration A 5,69 (.224) C B 2,84 (.112) O 3,05 (.120) POSITION 1 K E D L 10 2,84 (.112) 10,72 (.422) MAX W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 35 D Subminiature D*A Crimp Connectors without Contacts Plug Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEA9PK87FO DAA15PK87FO DBA25PK87FO DCA37PK87FO Note: For crimp (size 20) contacts and tooling, see pages 83 & 275. Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C O 3,05 (.120) B POSITION 1 D E 10 K 10,93 (.430) L W F Dimensions Shell Size DE DA DB DC DD 36 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*A Crimp Connectors without Contacts Receptacle Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEA9SA197FO DAA15SA197FO DBA25SA197FO DCA37SA197FO Note: For crimp (size 20) contacts and tooling, see pages 83 & 275. Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C O 3,05 (.120) B POSITION 1 D E 10 10,93 (.430) K L W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 37 D Subminiature D*W Discrete Wire IDC Plug Part Numbers Shell Size DE DA DB DC Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Layout 9 15 25 37 Clinch Nut #4-40 UNC DEWE9P* DAWE15P* DBWE25P* DCWE37P* Through Hole DEW9P* DAW15P* DBW25P* DCW37P* Through Hole & Shield Can Kit DEW9P*G DAW15P*G DBW25P*G DCW37P*G Clinch Nut #4-40 UNC & Shield Can Kit DEWE9P*G DAWE15P*G DBWE25P*G DCWE37P*G Note: *Insert contact type. Example: DEW9P1. For contacts with 0,76 m gold add -A176. Example: DEW9P1-A176. For shield can kit, see page 40. Contact Types* 1 2 3 Wire Accommodation 28 AWG/30 AWG 22 AWG/26 AWG 20 AWG/22 AWG For more information, see pages 40-41. Engaging Face A F C 1,33 (.052) B 10 1 13 E 7,00 (.276) D 14 G MAX 25 O 3,05 (.120) 14,50 (.571) L Rear Face H J Dimensions Shell Size DEW DAW DBW DCW 38 Layout 9 15 25 37 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,03 (2.048) 69,32 (2.729) B 0,12 (.005) 16,91 (.666) 25,54 (.994) 38,96 (1.534) 55,42 (2.182) C 0,12 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,35 (.329) 8,35 (.329) 8,35 (.329) 8,35 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,71 (.422) 10,71 (.422) 10,82 (.426) 10,82 (.426) G max. 6,05 (.238) 6,05 (.238) 5,99 (.236) 5,99 (.236) H 0,25 (.010) 19,27 (.759) 27,50 (1.083) 41,27 (1.625) 57,70 (2.272) J 0,25 (.010) 10,71 (.422) 10,71 (.422) 10,71 (.422) 10,71 (.422) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*W Discrete Wire IDC Receptacle Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Clinch Nut #4-40 UNC DEWE9S* DAWE15S* DBWE25S* DCWE37S* Through Hole DEW9S* DAW15S* DBW25S* DCW37S* Through Hole & Shield Can Kit DEW9S*G DAW15S*G DBW25S*G DCW37S*G Clinch Nut #4-40 UNC & Shield Can Kit DEWE9S*G DAWE15S*G DBWE25S*G DCWE37S*G Note: *Insert contact type. Example: DEW9S1. For contacts with 0,76 m gold add -A176. Example: DEW9S1-A176. For shield can kit, see page 40. Selection Guide For Product Features, Specifications, Materials and Finishes, see pages 30-31. Contact Types* 1 2 3 Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Wire Accommodation 28 AWG/30 AWG 22 AWG/26 AWG 20 AWG/22 AWG For more information, see pages 40-41. Engaging Face A F C 1,20 (.047) B 10 G MAX 1 13 E 7,00 (.276) D 25 14 O 3,05 (.120) 14,50 (.571) L H 0,25 (.010) 19,27 (.759) 27,50 (1.083) 41,27 (1.625) 57,70 (2.272) J 0,25 (.010) 10,71 (.422) 10,71 (.422) 10,71 (.422) 10,71 (.422) Rear Face H J Dimensions Shell Size DEW DAW DBW DCW Layout 9 15 25 37 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,03 (2.048) 69,32 (2.729) B 0,12 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 55,84 (2.159) C 0,12 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,89 (.429) 10,89 (.429) 10,89 (.429) 10,89 (.429) G max. 6,30 (.248) 6,30 (.248) 6,30 (.248) 6,30 (.248) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 39 D Subminiature D*W Shield Can Kit Ferrule D*W DEW9G DBW25G Materials and Finishes Shield Can and Ferrule Material: Steel Finish: Tin Ferrule XA 6,25 (.246) 6,25 (.246) 8,20 (.323) 8,20 (.323) 11,50 (.452) 11,50 (.452) 6,25 (.246) 6,25 (.246) 8,20 (.323) 8,20 (.323) 11,50 (.452) 11,50 (.452) X Cable 4,8-5,5 5,5-6,2 6,2-7,2 7,2-8,2 8,2-9,5 9,5-11,1 4,8-5,5 5,5-6,2 6,2-7,2 7,2-8,2 8,2-9,5 9,5-11,1 Ferrule Part Number 304-8810-000 304-8810-000 304-8811-000 304-8811-000 304-8812-000 304-8813-000 304-8810-000 304-8810-000 304-8811-000 304-8811-000 304-8812-000 304-8813-000 Crimp Tool Part Number D115433-1 D115433-1 D115433-2 D115433-2 D115433-3 D115433-3 D115433-1 D115433-1 D115433-2 D115433-2 D115433-3 D115433-3 Crimp Tool Position B A B A B A B A B A B A 38,80(1.528) WIRES BRAID FERRULE FERRULE, MUST BE PURCHASED SEPARATELY. 32,60(1.283) 16,70 (.657) FERRULE CABLE CABLE 39,80 (1.567) 60 35,00 (1.378) O10,00 (.394) 10,10 (.398) Ferrule Wire Trim Dimensions Crimp Tool Positions 11,25(.443) O 11,10(.437) OA 10,00(.394) 50,00 (1.969) 40 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*W Discrete Wire IDC Contacts Contacts Contact Types Pin Socket 1 330-8753-101 330-8754-101 2 330-8753-102 330-8754-102 3 330-8753-103 330-8754-103 Solid Cable Wire Size Section mm2 Internal dia. mm max External dia. mm max 28 AWG 0.08 0.32 1.30 30 AWG 0.05 0.26 1.20 22 AWG 0.34 0.62 1.45 24 AWG 0.22 0.51 1.45 26 AWG 0.12 0.40 1.40 20 AWG 0.60 0.88 1.45 22 AWG 0.34 0.62 1.45 28 AWG 0.09 7 x 0.13 0.40 1.30 30 AWG 0.05 7 x 0.10 0.30 1.20 22 AWG 0.34 7 x 0.25 0.75 1.45 24 AWG 0.22 7 x 0.20 0.60 1.45 26 AWG 0.12 7 x 0.15 0.45 1.40 20 AWG 0.60 19 x 0.20 0.97 1.45 22 AWG 0.34 7 x 0.25 0.75 1.45 Stranded Cable Wire Size Section mm2 Composition Internal cable dia. mm max External wire dia. mm max Insulation Displacement Connection Concept Tooling Extraction Tool Hand Crimp Tool Part Number DW115394 Part Number Standard Tool: DW115394-1 Automatic Tool: DW115394-2 Tool Support: DW115394-20 Row by Row Pneumatic Press Part Number DW115394-501 Dimensions are shown in mm (inch) Dimensions subject to change 41 Combo D D Subminiature Selection Index Page Combo D An Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Combo D PCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option) Coaxial 90 -- Standard Footprint .318 or .283 inch (Sizes DE-DC) . . . . . . . . . . . 44 Coaxial 90 -- Standard Footprint .489 or .454 inch (Size DD) . . . . . . . . . . . . . . 46 13C3 Special -- Receptacle Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 3C3 Shielded Special -- Receptacle Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Coaxial 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC). . . . . . . . . . . . 50 Coaxial Straight -- Standard PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Coaxial Straight -- Standard PC Tails (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Coaxial Straight -- European PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Coaxial Straight -- European PC Tails (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Combo D PCB Connectors with High Power Contacts 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Sizes DE-DC) . . . 60 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Size DD) . . . . . . . 62 40 A High Power 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC) . . . . 64 40 A High Power Straight -- Standard PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . 66 40 A High Power Straight -- Standard PC Tails (Size DD). . . . . . . . . . . . . . . . . . . . . . . 68 40 A High Power Straight -- European PC Tails (Sizes DE-DC). . . . . . . . . . . . . . . . . . . 70 40 A High Power Straight -- European PC Tails (Size DD) . . . . . . . . . . . . . . . . . . . . . . 72 Combo D PCB Connectors with (Size 20) Signal Contacts Only 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DD). . . . . . . . . . . . . . . . . . 74 Straight PC Tails -- European (Sizes DE-DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Solder Cup (Sizes DE-DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Combo D PCB Crimp Connectors without Contacts (Sizes DA-DD) . . . . . . . . . . . . . . . . 80 Loose Contacts and Tooling Shield Cans and Crimp Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Crimp (Size 20) Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Cable (Size 8) Loose Contacts Coaxial 75 Ohm and Tooling -- Straight Stamped Crimp/Crimp. . . . . . . . . . . . . . . . . 84 Coaxial 75 Ohm and Tooling -- 90 Crimp Braid/Solder Center Contact . . . . . . . . . . 85 Coaxial 50 Ohm -- Straight Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Coaxial 50 Ohm -- 90 Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . 88 Coaxial Assembly Instructions and Crimp Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 High Power and Tooling -- Straight Solder or Crimp . . . . . . . . . . . . . . . . . . . . . . . . . 90 High Voltage -- Straight / 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 PCB (Size 8) Loose Contacts Coaxial 75 Ohm -- Straight / 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 High Power -- Straight / 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 High Voltage -- Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 PCB Guide Pin and Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Connector footprint measured from front shell. Connector footprint measured from rear shell. 42 Dimensions are shown in mm (inch) Dimensions subject to change D S ubm i n i atur e M i l i tar y/H i gh R el i abi l i ty I TT Cannon Military/High Reliability D Subminiature connectors are used in many applications, including aerospace, transportation, communication systems, information systems and test equipment. Being the inventor of the D Subminiature connector, ITT Cannon is able to use its extensive design expertise and high quality manufacturing processes to insure the optimum performance and reliability. The D Subminiature connectors with fixed contacts in solder cup, straight and 90 PC contact terminations are qualified to MIL-C-24308 (see cross reference, pages 142-143). These highreliability D Subminiature connectors are the finest quality connectors available at the most competitive prices in the market. Applications: Aerospace Transportation Communication Systems Information Systems Test Equipment Product Features Suitable for a variety of cable and printed circuit board options Solder cup version accommodates wire size 20 AWG maximum 5 A standard current rating Clinch Nut and Float Mount Options Specifications Temperature Rating - 55C to 125C Signal Contact Current Rating 7.5 A current capacity Signal Contact Resistance Coaxial VSWR Coaxial Insertion Loss 55 millivolt max. at 7.5 test current Signal Contact Dielectric Withstanding Voltage 1250 VAC at Sea Level Coaxial Current Rating 5 A Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level Coaxial Impedance High Power Current Rating High Power Dielectric Withstanding Voltage High Voltage Current Rating High Voltage Contact Dielectric Withstanding Voltage 75 or 50 Less than 1.30+ .03F for F up to 500 MHz .3dB loss at 500 MHz Up to 40 A 1000 VAC at Sea Level 5A 2800 V at Sea Level Materials and Finishes Des cription S hell Material S teel Ins ulator Contacts (Military) Contacts (Commercial) Dual Float Mount Hardware Clinch Nut Hardware S tandoff Plastic Bracket Metal Bracket Polyes ter, UL 94V-0, Color: Green Copper Alloy Copper Alloy Stainless Steel Stainless Steel with plastic insert S teel Thermoplastic, UL 94V-0 S teel Finis h/Treatment Yellow Chromate over Zinc (Cadmium available upon request; order code -A101) None 50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance Gold over Nickel on mating area, Tin on balance Passivated Passivated Trivalent Chromate over Zinc None Zinc ( Tin if boardlocks are attached) Coaxial/High Power/High Voltage Contact Assemblies Contacts and Outer Shells Ring, Retaining Ins ulator ( Coaxial Only) Insulator (High Voltage Only) Copper Alloy Copper Alloy Teflon Thermoplastic Gold over Nickel Nickel None None Dimensions are shown in mm (inch) Dimensions subject to change131 Combo D D Subminiature Coaxial 90 -- Standard Footprint .318 or .283 inch (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 228-229. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMP5C1PJK87 DAMP7C2PJK87 DAMP11C1PJK87 DAMP3C3PJK87 DAMP3CK3PJK87TM DBMP5C5PJK87 DBMP9C4PJK87 DBMP13C3PJK87 DBMP17C2PJK87 DBMP21C1PJK87 DCMP8C8PJK87 DCMP13C6PJK87 DCMP17C5PJK87 DCMP21CA4PJK87 DCMP25C3PJK87 DCMP27C2PJK87 Part Number Without Screw Locks With Boardlocks DEMC5C1PJK87 DAMC7C2PJK87 DAMC11C1PJK87 DAMC3C3PJK87 DAMC3CK3PJK87TM DBMC5C5PJK87 DBMC9C4PJK87 DBMC13C3PJK87 DBMC17C2PJK87 DBMC21C1PJK87 DCMC8C8PJK87 DCMC13C6PJK87 DCMC17C5PJK87 DCMC21CA4PJK87 DCMC25C3PJK87 DCMC27C2PJK87 Part Number With Screw Locks Without Boardlocks DEMD5C1PJK87 DAMD7C2PJK87 DAMD11C1PJK87 DAMD3C3PJK87 DAMD3CK3PJK87TM DBMD5C5PJK87 DBMD9C4PJK87 DBMD13C3PJK87 DBMD17C2PJK87 DBMD21C1PJK87 DCMD8C8PJK87 DCMD13C6PJK87 DCMD17C5PJK87 DCMD21CA4PJK87 DCMD25C3PJK87 DCMD27C2PJK87 Part Number With Screw Locks With Boardlocks DEMG5C1PJK87 DAMG7C2PJK87 DAMG11C1PJK87 DAMG3C3PJK87 DAMG3CK3PJK87TM DBMG5C5PJK87 DBMG9C4PJK87 DBMG13C3PJK87 DBMG17C2PJK87 DBMG21C1PJK87 DCMG8C8PJK87 DCMG13C6PJK87 DCMG17C5PJK87 DCMG21CA4PJK87 DCMG25C3PJK87 DCMG27C2PJK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PJK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5C1PJK127 For DD shell sizes, see page 46. Keyed. 0,56 (.023) Engaging Face O 0,51 (.020) 2,54 (.100) A C 3,89 (.153) MIN B 11,94 0,33 (.470 .013) E D L Screw lock, boardlock, and signal contacts removed for clarity BOARDLOCK 10 O 0,76 (.030) 0,82 (.032) 2,92 (.115) 2,84 (.112) BRACKET, METAL 12,34 (.486) 8,64 (.340) 4,33 0,38 (.170 .015) 7,18 0,25 (.283 .010) RIVNUT #4-40 UNC F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and coaxial contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 44 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial 90 -- Standard Footprint .318 or .283 inch (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 231-232. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMP5C1SJA197 DAMP7C2SJA197 DAMP11C1SJA197 DAMP3C3SJA197 DAMP3CK3SJA197TM DBMP5C5SJA197 DBMP9C4SJA197 DBMP13C3SJA197 DBMP17C2SJA197 DBMP21C1SJA197 DCMP8C8SJA197 DCMP13C6SJA197 DCMP17C5SJA197 DCMP21CA4SJA197 DCMP25C3SJA197 DCMP27C2SJA197 Part Number Without Screw Locks With Boardlocks DEMC5C1SJA197 DAMC7C2SJA197 DAMC11C1SJA197 DAMC3C3SJA197 DAMC3CK3SJA197TM DBMC5C5SJA197 DBMC9C4SJA197 DBMC13C3SJA197 DBMC17C2SJA197 DBMC21C1SJA197 DCMC8C8SJA197 DCMC13C6SJA197 DCMC17C5SJA197 DCMC21CA4SJA197 DCMC25C3SJA197 DCMC27C2SJA197 Part Number With Screw Locks Without Boardlocks DEMD5C1SJA197 DAMD7C2SJA197 DAMD11C1SJA197 DAMD3C3SJA197 DAMD3CK3SJA197TM DBMD5C5SJA197 DBMD9C4SJA197 DBMD13C3SJA197 DBMD17C2SJA197 DBMD21C1SJA197 DCMD8C8SJA197 DCMD13C6SJA197 DCMD17C5SJA197 DCMD21CA4SJA197 DCMD25C3SJA197 DCMD27C2SJA197 Part Number With Screw Locks With Boardlocks DEMG5C1SJA197 DAMG7C2SJA197 DAMG11C1SJA197 DAMG3C3SJA197 DAMG3CK3SJA197TM DBMG5C5SJA197 DBMG9C4SJA197 DBMG13C3SJA197 DBMG17C2SJA197 DBMG21C1SJA197 DCMG8C8SJA197 DCMG13C6SJA197 DCMG17C5SJA197 DCMG21CA4SJA197 DCMG25C3SJA197 DCMG27C2SJA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SJA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEMP5C1SJK126 For DD Shell Sizes, see page 47. Keyed. 0,56 (.023) O 0,51 (.020) 2,54 (.100) Engaging Face A C B 3,89 (.153) MIN 11,94 0,33 (.470 .013) D E L 10 BOARDLOCK O 0,76 (.030) 2,92 (.115) Screw lock, boardlock and signal contacts removed for clarity 0,79 (.031) 12,34 (.486) RIVNUT #4-40 UNC 8,64 (.340) 4,33 0,38 (.170 .015) 2,84 (.112) BRACKET, METAL 7,18 0,25 (.283 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock and coaxial contact removed for clarity Note: Dimension varies with alternate bracket configuration, See Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47.04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 45 Combo D D Subminiature Coaxial 90 -- Standard Footprint .489 or .454 inch (Size DD) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMP24C7PJK87 DDMP36C4PJK87 DDMP43C2PJK87 DDMP47C1PJK87 Part Number Without Screw Locks With Boardlocks DDMC24C7PJK87 DDMC36C4PJK87 DDMC43C2PJK87 DDMC47C1PJK87 Part Number With Screw Locks Without Boardlocks DDMD24C7PJK87 DDMD36C4PJK87 DDMD43C2PJK87 DDMD47C1PJK87 Part Number With Screw Locks With Boardlocks DDMG24C7PJK87 DDMG36C4PJK87 DDMG43C2PJK87 DDMG47C1PJK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4PJK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24C7PJK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 230. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK #4-40 UNC W 6,50 0,25 (.256 .010) F 10,06 (.396) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC 13,74 (.541) 5,68 (.224) 4,33 0,38 (.170 .015) 2,84 (.112) BRACKET, METAL Screw lock, boardlock, and coaxial contacts removed for clarity Engaging Face 10 L E 11,94 0,33 (.470 .013) 2,54 (.100) O 0,51 (.020) 0,56 (.023) D 0,82 (.032) BOARDLOCK 3,89 (.153) MIN O 0,76 (.030) 2,92 (.115) B C Screw lock, boardlock, and signal contacts removed for clarity A Note: Dimension varies with alternate bracket configuration, See Reader's Resource page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 46 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial 90 -- Standard Footprint .489 or .454 inch (Size DD) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMP24C7SJA197 DDMP36C4SJA197 DDMP43C2SJA197 DDMP47C1SJA197 Part Number Without Screw Locks With Boardlocks DDMC24C7SJA197 DDMC36C4SJA197 DDMC43C2SJA197 DDMC47C1SJA197 Part Number With Screw Locks Without Boardlocks DDMD24C7SJA197 DDMD36C4SJA197 DDMD43C2SJA197 DDMD47C1SJA197 Part Number With Screw Locks With Boardlocks DDMG24C7SJA197 DDMG36C4SJA197 DDMG43C2SJA197 DDMG47C1SJA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4SJA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24C7SJK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 233. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC W F 11,53 0,25 (.454 .010) 10,06 (.396) 13,74 (.541) RIVNUT #4-40 UNC 5,68 (.224) BRACKET, METAL 4,33 0,38 (.170 .015) 2,84 (.112) Screw lock, boardlock, and coaxial contact removed for clarity Engaging Face 10 L 2,54 (.100) O 0,51 (.020) D E 11,94 0,33 (.470 .013) 2,92 (.115) 3,89 (.153) MIN BOARDLOCK O 0,76 (.030) 0,82 (.032) B 0,56 (.023) C Screw lock, boardlock, and signal contacts removed for clarity A Note: Dimension varies with alternate bracket configuration, See Reader's Resource page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 47 Combo D D-Subminiature 13C3 Special -- Receptacle only Receptacle Part Number Finishes Signal and Coaxial Center Contact Finish: 30 inches Gold. DB111949-43 Note: For additional materials and finishes, see introduction page 43. Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 236 (Rear shell REF. is 0,76 (.030) from front shell). For panel cutouts, see page 221. Engaging Face 53,15 0,35 (2.095 .014) 47,04 (1.852) 6,13 0,13 (.241 .005) 38,38 (1.510) 12,91(.508) MAX A1 1 2,80 0,25 (.110 .010) 48 A2 A3 7,87(.310) 6,27 0,25 (.247 .010) 6 10 BOARDLOCK 2,90 0,21 (.114 .008) 10,17 (.400) (SIGNAL AND COAX) 12,71 (.500) (SIGNAL AND COAX) 15,25 (.600) (COAX ONLY) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 3C3 Shielded Special -- Receptacle only Receptacle Materials and Finishes Body Material: Body Finish: Coaxial Center Contact Finish: Part Number Zinc Tin DAM53512-1405 30 inches Gold Note: For additional materials and finishes, see introduction page 43. Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 231. For panel cutouts, see page 221. Engaging Face A C B D E 0,56 (.023) 10 O 0,51 (.020) 4,19 - 2,79 (.165 - .110) 2,54 (.100) 12,12 (.477) 12,62 (.497) F 9,37 (.369) W Note: Connector supplied with boardlocks. Dimensions Shell Size DA A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 24,66 (.971) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 7,90 (.311) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,90 (.429) W 0,25 (.010) 6,17 (.243) Dimensions are shown in mm (inch) Dimensions subject to change 49 Combo D D Subminiature Coaxial 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 234-235. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMP5C1PVK87 DAMP7C2PVK87 DAMP11C1PVK87 DAMP3C3PVK87 DAMP3CK3PVK87TM DBMP5C5PVK87 DBMP9C4PVK87 DBMP13C3PVK87 DBMP17C2PVK87 DBMP21C1PVK87 DCMP8C8PVK87 DCMP13C6PVK87 DCMP17C5PVK87 DCMP21CA4PVK87 DCMP25C3PVK87 DCMP27C2PVK87 Part Number Without Screw Locks With Boardlocks DEMC5C1PVK87 DAMC7C2PVK87 DAMC11C1PVK87 DAMC3C3PVK87 DAMC3CK3PVK87TM DBMC5C5PVK87 DBMC9C4PVK87 DBMC13C3PVK87 DBMC17C2PVK87 DBMC21C1PVK87 DCMC8C8PVK87 DCMC13C6PVK87 DCMC17C5PVK87 DCMC21CA4PVK87 DCMC25C3PVK87 DCMC27C2PVK87 Part Number With Screw Locks Without Boardlocks DEMD5C1PVK87 DAMD7C2PVK87 DAMD11C1PVK87 DAMD3C3PVK87 DAMD3CK3PVK87TM DBMD5C5PVK87 DBMD9C4PVK87 DBMD13C3PVK87 DBMD17C2PVK87 DBMD21C1PVK87 DCMD8C8PVK87 DCMD13C6PVK87 DCMD17C5PVK87 DCMD21CA4PVK87 DCMD25C3PVK87 DCMD27C2PVK87 Part Number With Screw Locks With Boardlocks DEMG5C1PVK87 DAMG7C2PVK87 DAMG11C1PVK87 DAMG3C3PVK87 DAMG3CK3PVK87TM DBMG5C5PVK87 DBMG9C4PVK87 DBMG13C3PVK87 DBMG17C2PVK87 DBMG21C1PVK87 DCMG8C8PVK87 DCMG13C6PVK87 DCMG17C5PVK87 DCMG21CA4PVK87 DCMG25C3PVK87 DCMG27C2PVK87 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PVK87 For tin plated PC tails add A226 (signal contacts only). Example: DEMP5C1PVK87A226 For performance class 2 substitute K127 for K87. Example: DEMP5C1PVK127 For DD shell sizes (Standard footprint) see page 46. Keyed. Engaging Face 0,56 (.023) O 0,51 (.020) 2,54 (.100) A C B E 2,89 (.113) MIN 11,94 0,33 (.470 .013) D L 1,00 (.039) 10 BOARDLOCK O 0,60 (.024) 0,82 (.032) 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity 2,54 (.100) BRACKET, METAL 14,55 (.573) 10,85 (.427) 4,00 (.157) 9,40 0,20 (.370 .008) RIVNUT #4-40 UNC F W 6,50 0,25 (.256 .010) Screw lock, boardlock, and coaxial contact removed for clarity SCREW LOCK #4-40 UNC Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 50 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC) 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Receptacle Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 236-237. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Part Number Without Screw Locks Layout Without Boardlocks 5W1 DEMP5C1SVA197 7W2 DAMP7C2SVA197 11W1 DAMP11C1SVA197 3W3 DAMP3C3SVA197 3WK3 DAMP3CK3SVA197TM 5W5 DBMP5C5SVA197 9W4 DBMP9C4SVA197 13W3 DBMP13C3SVA197 17W2 DBMP17C2SVA197 21W1 DBMP21C1SVA197 8W8 DCMP8C8SVA197 13W6 DCMP13C6SVA197 17W5 DCMP17C5SVA197 21WA4 DCMP21CA4SVA197 25W3 DCMP25C3SVA197 27W2 DCMP27C2SVA197 Part Number Without Screw Locks With Boardlocks DEMC5C1SVA197 DAMC7C2SVA197 DAMC11C1SVA197 DAMC3C3SVA197 DAMC3CK3SVA197TM DBMC5C5SVA197 DBMC9C4SVA197 DBMC13C3SVA197 DBMC17C2SVA197 DBMC21C1SVA197 DCMC8C8SVA197 DCMC13C6SVA197 DCMC17C5SVA197 DCMC21CA4SVA197 DCMC25C3SVA197 DCMC27C2SVA197 Part Number With Screw Locks Without Boardlocks DEMD5C1SVA197 DAMD7C2SVA197 DAMD11C1SVA197 DAMD3C3SVA197 DAMD3CK3SVA197TM DBMD5C5SVA197 DBMD9C4SVA197 DBMD13C3SVA197 DBMD17C2SVA197 DBMD21C1SVA197 DCMD8C8SVA197 DCMD13C6SVA197 DCMD17C5SVA197 DCMD21CA4SVA197 DCMD25C3SVA197 DCMD27C2SVA197 Part Number With Screw Locks With Boardlocks DEMG5C1SVA197 DAMG7C2SVA197 DAMG11C1SVA197 DAMG3C3SVA197 DAMG3CK3SVA197TM DBMG5C5SVA197 DBMG9C4SVA197 DBMG13C3SVA197 DBMG17C2SVA197 DBMG21C1SVA197 DCMG8C8SVA197 DCMG13C6SVA197 DCMG17C5SVA197 DCMG21CA4SVA197 DCMG25C3SVA197 DCMG27C2SVA197 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SVA197 For performance class 2 substitute K126 for A197. Example: DEMP5C1SVK126 For DD shell sizes (standard footprint) see page 47. Keyed. 0,56 (.023) Engaging Face O 0,51 (.020) A C 2,89 (.113) MIN 2.54 (.100) B E 11,94 0,33 (.470 .013) D L 1,00 (.039) 2,92 (.115) 10 BOARDLOCK O 0,60 (.024) 0,82 (.032) Screw lock, boardlock, and signal contacts removed for clarity 2,54 (.100) 4,00 (.157) BRACKET, METAL 14,55 (.573) 10,85 (.427) 9,40 0,20 (.370 .008) RIVNUT #4-40 UNC W 6,50 0,25 (.256 .010) SCREW LOCK F Screw lock, boardlock, and coaxial contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 51 Combo D D Subminiature Coaxial Straight -- Standard PC Tails (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 238-239. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMV5C1PNK87 DAMV7C2PNK87 DAMV11C1PNK87 DAMV3C3PNK87 DAMV3CK3PNK87TM DBMV5C5PNK87 DBMV9C4PNK87 DBMV13C3PNK87 DBMV17C2PNK87 DBMV21C1PNK87 DCMV8C8PNK87 DCMV13C6PNK87 DCMV17C5PNK87 DCMV21CA4PNK87 DCMV25C3PNK87 DCMV27C2PNK87 Part Number Without Screw Locks With Boardlocks DEMZ5C1PNK87 DAMZ7C2PNK87 DAMZ11C1PNK87 DAMZ3C3PNK87 DAMZ3CK3PNK87TM DBMZ5C5PNK87 DBMZ9C4PNK87 DBMZ13C3PNK87 DBMZ17C2PNK87 DBMZ21C1PNK87 DCMZ8C8PNK87 DCMZ13C6PNK87 DCMZ17C5PNK87 DCMZ21CA4PNK87 DCMZ25C3PNK87 DCMZ27C2PNK87 Part Number With Screw Locks With Boardlocks DEMN5C1PNK87 DAMN7C2PNK87 DAMN11C1PNK87 DAMN3C3PNK87 DAMN3CK3PNK87TM DBMN5C5PNK87 DBMN9C4PNK87 DBMN13C3PNK87 DBMN17C2PNK87 DBMN21C1PNK87 DCMN8C8PNK87 DCMN13C6PNK87 DCMN17C5PNK87 DCMN21CA4PNK87 DCMN25C3PNK87 DCMN27C2PNK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PNK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN5C1PNK127 For DD shell sizes, see page 54. Keyed. Engaging Face 2,54 (.100) A C O 0,51 (.020) 0,62 (.024) B E D L 10 Screw lock, boardlock, and signal contacts removed for clarity O 0,76 (.030) BOARDLOCK 0,82 (.032) 3,45 (.136) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC F Screw lock, boardlock, and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC 52 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial Straight -- Standard PC Tails (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 241-242. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMV5C1SNA197 DAMV7C2SNA197 DAMV11C1SNA197 DAMV3C3SNA197 DAMV3CK3SNA197TM DBMV5C5SNA197 DBMV9C4SNA197 DBMV13C3SNA197 DBMV17C2SNA197 DBMV21C1SNA197 DCMV8C8SNA197 DCMV13C6SNA197 DCMV17C5SNA197 DCMV21CA4SNA197 DCMV25C3SNA197 DCMV27C2SNA197 Part Number Without Screw Locks With Boardlocks DEMZ5C1SNA197 DAMZ7C2SNA197 DAMZ11C1SNA197 DAMZ3C3SNA197 DAMZ3CK3SNA197TM DBMZ5C5SNA197 DBMZ9C4SNA197 DBMZ13C3SNA197 DBMZ17C2SNA197 DBMZ21C1SNA197 DCMZ8C8SNA197 DCMZ13C6SNA197 DCMZ17C5SNA197 DCMZ21CA4SNA197 DCMZ25C3SNA197 DCMZ27C2SNA197 Part Number With Screw Locks With Boardlocks DEMN5C1SNA197 DAMN7C2SNA197 DAMN11C1SNA197 DAMN3C3SNA197 DAMN3CK3SNA197TM DBMN5C5SNA197 DBMN9C4SNA197 DBMN13C3SNA197 DBMN17C2SNA197 DBMN21C1SNA197 DCMN8C8SNA197 DCMN13C6SNA197 DCMN17C5SNA197 DCMN21CA4SNA197 DCMN25C3SNA197 DCMN27C2SNA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SNA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN5C1SNK126 For DD shell sizes, see page 55. Keyed. Engaging Face A O 0,51 (.020) 2,54 (1.00) C 0,62 (.024) B E D L 10 BOARDLOCK 3,45 (.136) Hardware and signal contacts removed for clarity 0,82 (.032) O 0,76 (.030) 4,52 (.178) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC F Hardware and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 53 Combo D D Subminiature Coaxial Straight -- Standard PC Tails (Size DD) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24C7PNK87 DDMV36C4PNK87 DDMV43C2PNK87 DDMV47C1PNK87 Part Number Without Screw Locks With Boardlocks DDMZ24C7PNK87 DDMZ36C4PNK87 DDMZ43C2PNK87 DDMZ47C1PNK87 Part Number With Screw Locks With Boardlocks DDMN24C7PNK87 DDMN36C4PNK87 DDMN43C2PNK87 DDMN47C1PNK87 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PNK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DDMN24C7PNK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 240. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A O 0,51 (.020) C 2,54 (.100) B 0,62 (.024) D E L 10 Hardware and signal contacts removed for clarity BOARDLOCK 0,82 (.032) 3,45 (.136) O 0,76 (.030) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 5,69 (.224) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) F W SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions Shell Size DD 54 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial Straight -- Standard PC Tails (Size DD) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24C7SNA197 DDMV36C4SNA197 DDMV43C2SNA197 DDMV47C1SNA197 Part Number Without Screw Locks With Boardlocks DDMZ24C7SNA197 DDMZ36C4SNA197 DDMZ43C2SNA197 DDMZ47C1SNA197 Part Number With Screw Locks With Boardlocks DDMN24C7SNA197 DDMN36C4SNA197 DDMN43C2SNA197 DDMN47C1SNA197 Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SNA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DDMN24C7SNK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 243. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A 2,54 (.100) C O 0,51 (.020) 0,62 (.024) B D E L Hardware and signal contacts removed for clarity 10 BOARDLOCK 0,82 (.032) 3,45 (.136) 5,69 (.224) O 0,76 (.030) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) F W SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 55 Combo D D Subminiature Coaxial Straight -- European PC Tails (Sizes DE-DC) 75 Ohm Part Numbers* with Standoff #4-40 UNC Plug Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 238-239. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Part Number Without Screw Locks Without Boardlocks DEMV5C1PYK87 DAMV7C2PYK87 DAMV11C1PYK87 DAMV3C3PYK87 DAMV3CK3PYK87TM DBMV5C5PYK87 DBMV9C4PYK87 DBMV13C3PYK87 DBMV17C2PYK87 DBMV21C1PYK87 DCMV8C8PYK87 DCMV13C6PYK87 DCMV17C5PYK87 DCMV21CA4PYK87 DCMV25C3PYK87 DCMV27C2PYK87 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks With Boardlocks DEMZ5C1PYK87 DAMZ7C2PYK87 DAMZ11C1PYK87 DAMZ3C3PYK87 DAMZ3CK3PYK87TM DBMZ5C5PYK87 DBMZ9C4PYK87 DBMZ13C3PYK87 DBMZ17C2PYK87 DBMZ21C1PYK87 DCMZ8C8PYK87 DCMZ13C6PYK87 DCMZ17C5PYK87 DCMZ21CA4PYK87 DCMZ25C3PYK87 DCMZ27C2PYK87 Part Number With Screw Locks With Boardlocks DEMN5C1PYK87 DAMN7C2PYK87 DAMN11C1PYK87 DAMN3C3PYK87 DAMN3CK3PYK87TM DBMN5C5PYK87 DBMN9C4PYK87 DBMN13C3PYK87 DBMN17C2PYK87 DBMN21C1PYK87 DCMN8C8PYK87 DCMN13C6PYK87 DCMN17C5PYK87 DCMN21CA4PYK87 DCMN25C3PYK87 DCMN27C2PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PYK87 For tin plated PC tails add A226 (signal contacts only). Example: DEMV5C1PYK87A226 For performance class 2 substitute K127 for K87. Example: DEMV5C1PYK127 For DD shell sizes, see page 58. Keyed. Engaging Face A O 0,51 (.020) 2,54 (.100) C 0,62 (.024) B D E L 10 BOARDLOCK Hardware and signal contacts removed for clarity 0,82 (.032) O 0,60 (.024) 3,45 (.136) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,91 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC 56 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial Straight -- European PC Tails (Sizes DE-DC) 75 Ohm Part Numbers* with Standoff #4-40 UNC Receptacle Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 241-242. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMV5C1SYA197 DAMV7C2SYA197 DAMV11C1SYA197 DAMV3C3SYA197 DAMV3CK3SYA197TM DBMV5C5SYA197 DBMV9C4SYA197 DBMV13C3SYA197 DBMV17C2SYA197 DBMV21C1SYA197 DCMV8C8SYA197 DCMV13C6SYA197 DCMV17C5SYA197 DCMV21CA4SYA197 DCMV25C3SYA197 DCMV27C2SYA197 Part Number Without Screw Locks With Boardlocks DEMZ5C1SYA197 DAMZ7C2SYA197 DAMZ11C1SYA197 DAMZ3C3SYA197 DAMZ3CK3SYA197TM DBMZ5C5SYA197 DBMZ9C4SYA197 DBMZ13C3SYA197 DBMZ17C2SYA197 DBMZ21C1SYA197 DCMZ8C8SYA197 DCMZ13C6SYA197 DCMZ17C5SYA197 DCMZ21CA4SYA197 DCMZ25C3SYA197 DCMZ27C2SYA197 Part Number With Screw Locks With Boardlocks DEMN5C1SYA197 DAMN7C2SYA197 DAMN11C1SYA197 DAMN3C3SYA197 DAMN3CK3SYA197TM DBMN5C5SYA197 DBMN9C4SYA197 DBMN13C3SYA197 DBMN17C2SYA197 DBMN21C1SYA197 DCMN8C8SYA197 DCMN13C6SYA197 DCMN17C5SYA197 DCMN21CA4SYA197 DCMN25C3SYA197 DCMN27C2SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SYA197 For performance class 2 substitute K126 for A197. Example: DEMV5C1SYK126 For DD shell sizes, see page 59. Keyed. Engaging Face 2,54 (.100) A C O 0,51 (.020) 0,62 (.024) B D E L 10 Hardware and signal contacts removed for clarity BOARDLOCK O 0,60 (.024) 0,82 (.032) 3,45 (.136) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) W STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Hardware and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC A 0.38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 57 Combo D D Subminiature Coaxial Straight -- European PC Tails (Size DD) 75 Ohm Part Numbers* with Standoff #4-40 UNC Plug Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24C7PYK87 DDMV36C4PYK87 DDMV43C2PYK87 DDMV47C1PYK87 Part Number Without Screw Locks With Boardlocks DDMZ24C7PYK87 DDMZ36C4PYK87 DDMZ43C2PYK87 DDMZ47C1PYK87 Part Number With Screw Locks With Boardlocks DDMN24C7PYK87 DDMN36C4PYK87 DDMN43C2PYK87 DDMN47C1PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PYK87 For tin plated PC tails add A226 (signal contacts only). Example: DDMV24C7PYK87A226 For performance class 2 substitute K127 for K87. Example: DDMV24C7PYK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 240. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face O 0,51 (.020) 0,62 (.024) A 2,54 (.100) C B E D L 10 BOARDLOCK Hardware and signal contacts removed for clarity 0,82 (.032) 3,45 (.136) O 0,60 (.024) 4,52 (.178) 7,62 0,25 (.300 .010) 5,69 (.224) 2,84 (.112) 2,92 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions Shell Size DD 58 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial Straight -- European PC Tails (Size DD) 75 Ohm Part Numbers* with Standoff #4-40 UNC Receptacle Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24C7SYA197 DDMV36C4SYA197 DDMV43C2SYA197 DDMV47C1SYA197 Part Number Without Screw Locks With Boardlocks DDMZ24C7SYA197 DDMZ36C4SYA197 DDMZ43C2SYA197 DDMZ47C1SYA197 Part Number With Screw Locks With Boardlocks DDMN24C7SYA197 DDMN36C4SYA197 DDMN43C2SYA197 DDMN47C1SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SYA197 For performance class 2 substitute K126 for A197. Example: DDMV24C7SYK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 243. For panel cutouts, see page 221. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face O 0,51 (.020) 0,62 (.024) A 2,54 (.100) C B D E L Hardware and signal contacts removed for clarity 10 0,82 (.032) BOARDLOCK O 0,60 (.024) 3,45 (.136) 5,69 (.224) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC Hardware and coaxial contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 59 Combo D D Subminiature 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 244-245. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Part Number Without Screw Locks Layout Without Boardlocks 5W1 DEMP5H1PJK87 7W2 DAMP7H2PJK87 11W1 DAMP11H1PJK87 3W3 DAMP3H3PJK87 3WK3 DAMP3HK3PJK87TM 5W5 DBMP5H5PJK87 9W4 DBMP9H4PJK87 13W3 DBMP13H3PJK87 17W2 DBMP17H2PJK87 21W1 DBMP21H1PJK87 8W8 DCMP8H8PJK87 13W6 DCMP13H6PJK87 17W5 DCMP17H5PJK87 21WA4 DCMP21HA4PJK87 25W3 DCMP25H3PJK87 27W2 DCMP27H2PJK87 Part Number Without Screw Locks With Boardlocks DEMC5H1PJK87 DAMC7H2PJK87 DAMC11H1PJK87 DAMC3H3PJK87 DAMC3HK3PJK87TM DBMC5H5PJK87 DBMC9H4PJK87 DBMC13H3PJK87 DBMC17H2PJK87 DBMC21H1PJK87 DCMC8H8PJK87 DCMC13H6PJK87 DCMC17H5PJK87 DCMC21HA4PJK87 DCMC25H3PJK87 DCMC27H2PJK87 Part Number With Screw Locks Without Boardlocks DEMD5H1PJK87 DAMD7H2PJK87 DAMD11H1PJK87 DAMD3H3PJK87 DAMD3HK3PJK87TM DBMD5H5PJK87 DBMD9H4PJK87 DBMD13H3PJK87 DBMD17H2PJK87 DBMD21H1PJK87 DCMD8H8PJK87 DCMD13H6PJK87 DCMD17H5PJK87 DCMD21HA4PJK87 DCMD25H3PJK87 DCMD27H2PJK87 Part Number With Screw Locks With Boardlocks DEMG5H1PJK87 DAMG7H2PJK87 DAMG11H1PJK87 DAMG3H3PJK87 DAMG3HK3PJK87TM DBMG5H5PJK87 DBMG9H4PJK87 DBMG13H3PJK87 DBMG17H2PJK87 DBMG21H1PJK87 DCMG8H8PJK87 DCMG13H6PJK87 DCMG17H5PJK87 DCMG21HA4PJK87 DCMG25H3PJK87 DCMG27H2PJK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5H1PJK127 For DD shell sizes, see page 62. Keyed. Engaging Face 3,89 (.153) MIN. A C B 20,57 0,38 (.810 .015) E D L BOARDLOCK 10 O 0,76 (.030) O 3,18 (.125) 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity 2,84 (.112) 4,33 0,38 (.170 .015) BRACKET, METAL 12,34 (.486) 8,64 (.340) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 60 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 247-248. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Part Number Without Screw Locks Layout Without Boardlocks 5W1 DEMP5H1SJA197 7W2 DAMP7H2SJA197 11W1 DAMP11H1SJA197 3W3 DAMP3H3SJA197 3WK3 DAMP3HK3SJA197TM 5W5 DBMP5H5SJA197 9W4 DBMP9H4SJA197 13W3 DBMP13H3SJA197 17W2 DBMP17H2SJA197 21W1 DBMP21H1SJA197 8W8 DCMP8H8SJA197 13W6 DCMP13H6SJA197 17W5 DCMP17H5SJA197 21WA4 DCMP21HA4SJA197 25W3 DCMP25H3SJA197 27W2 DCMP27H2SJA197 Part Number Without Screw Locks With Boardlocks DEMC5H1SJA197 DAMC7H2SJA197 DAMC11H1SJA197 DAMC3H3SJA197 DAMC3HK3SJA197TM DBMC5H5SJA197 DBMC9H4SJA197 DBMC13H3SJA197 DBMC17H2SJA197 DBMC21H1SJA197 DCMC8H8SJA197 DCMC13H6SJA197 DCMC17H5SJA197 DCMC21HA4SJA197 DCMC25H3SJA197 DCMC27H2SJA197 Part Number With Screw Locks Without Boardlocks DEMD5H1SJA197 DAMD7H2SJA197 DAMD11H1SJA197 DAMD3H3SJA197 DAMD3HK3SJA197TM DBMD5H5SJA197 DBMD9H4SJA197 DBMD13H3SJA197 DBMD17H2SJA197 DBMD21H1SJA197 DCMD8H8SJA197 DCMD13H6SJA197 DCMD17H5SJA197 DCMD21HA4SJA197 DCMD25H3SJA197 DCMD27H2SJA197 Part Number With Screw Locks With Boardlocks DEMG5H1SJA197 DAMG7H2SJA197 DAMG11H1SJA197 DAMG3H3SJA197 DAMG3HK3SJA197TM DBMG5H5SJA197 DBMG9H4SJA197 DBMG13H3SJA197 DBMG17H2SJA197 DBMG21H1SJA197 DCMG8H8SJA197 DCMG13H6SJA197 DCMG17H5SJA197 DCMG21HA4SJA197 DCMG25H3SJA197 DCMG27H2SJA197 Note: For contacts with 30 microinches of gold substitute K126 for A197. Example: DEMP5H1SJK126 For DD shell sizes, see page 63. Keyed. 3,89 (.153) MIN. Engaging Face 20,57 0,38 (.810 .015) L Screw lock, boardlock, and signal contacts removed for clarity 2,92 (.115) O 0,76 (.030) 4,33 0,38 (.170 .015) 2,84 (.112) BRACKET, METAL 12,34 (.486) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC 8,64 (.340) F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 61 Combo D D Subminiature 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Size DD) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMP24H7PJK87 DDMP36H4PJK87 DDMP43H2PJK87 DDMP47H1PJK87 Part Number Without Screw Locks With Boardlocks DDMC24H7PJK87 DDMC36H4PJK87 DDMC43H2PJK87 DDMC47H1PJK87 Part Number With Screw Locks Without Boardlocks DDMD24H7PJK87 DDMD36H4PJK87 DDMD43H2PJK87 DDMD47H1PJK87 Part Number With Screw Locks With Boardlocks DDMG24H7PJK87 DDMG36H4PJK87 DDMG43H2PJK87 DDMG47H1PJK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24H7PJK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 246. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 0,38 (.810 .015) D E L 2,92 (.115) BOARDLOCK 10 O 3.18 (.125) Screw lock, boardlock, and signal contacts removed for clarity O 0,76 (.030) 2,84 (.112) 4,33 0,38 (.170 .015) 5,68 (.224) BRACKET, METAL 13,74 (.541) RIVNUT #4-40 UNC 10,06 (.396) 11,53 0,25 (.454 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 62 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power 90 -- Standard Footprint .489 or .454 inch (Size DD) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMP24H7SJA197 DDMP36H4SJA197 DDMP43H2SJA197 DDMP47H1SJA197 Part Number Without Screw Locks With Boardlocks DDMC24H7SJA197 DDMC36H4SJA197 DDMC43H2SJA197 DDMC47H1SJA197 Part Number With Screw Locks Without Boardlocks DDMD24H7SJA197 DDMD36H4SJA197 DDMD43H2SJA197 DDMD47H1SJA197 Part Number With Screw Locks With Boardlocks DDMG24H7SJA197 DDMG36H4SJA197 DDMG43H2SJA197 DDMG47H1SJA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24H7SJK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 249. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 0,38 (.810 .015) E D L 10 BOARDLOCK O 3,18 (.125) O 0,76 (.030) 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity 2,84 (.112) BRACKET, METAL RIVNUT #4-40 UNC 13,74 (.541) 10,06 (.396) 4,33 0,38 (.170 .015) 5,68 (.224) 11,53 0,25 (.454 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 63 Combo D D Subminiature 40 A High Power 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 250-251. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Part Number Without Screw Locks Layout Without Boardlocks 5W1 DEMP5P1PVK87 7W2 DAMP7P2PVK87 11W1 DAMP11P1PVK87 3W3 DAMP3P3PVK87 3WK3 DAMP3PK3PVK87TM 5W5 DBMP5P5PVK87 9W4 DBMP9P4PVK87 13W3 DBMP13P3PVK87 17W2 DBMP17P2PVK87 21W1 DBMP21P1PVK87 8W8 DCMP8P8PVK87 13W6 DCMP13P6PVK87 17W5 DCMP17P5PVK87 21WA4 DCMP21PA4PVK87 25W3 DCMP25P3PVK87 27W2 DCMP27P2PVK87 Part Number Without Screw Locks With Boardlocks DEMC5P1PVK87 DAMC7P2PVK87 DAMC11P1PVK87 DAMC3P3PVK87 DAMC3PK3PVK87TM DBMC5P5PVK87 DBMC9P4PVK87 DBMC13P3PVK87 DBMC17P2PVK87 DBMC21P1PVK87 DCMC8P8PVK87 DCMC13P6PVK87 DCMC17P5PVK87 DCMC21PA4PVK87 DCMC25P3PVK87 DCMC27P2PVK87 Part Number With Screw Locks Without Boardlocks DEMD5P1PVK87 DAMD7P2PVK87 DAMD11P1PVK87 DAMD3P3PVK87 DAMD3PK3PVK87TM DBMD5P5PVK87 DBMD9P4PVK87 DBMD13P3PVK87 DBMD17P2PVK87 DBMD21P1PVK87 DCMD8P8PVK87 DCMD13P6PVK87 DCMD17P5PVK87 DCMD21PA4PVK87 DCMD25P3PVK87 DCMD27P2PVK87 Part Number With Screw Locks With Boardlocks DEMG5P1PVK87 DAMG7P2PVK87 DAMG11P1PVK87 DAMG3P3PVK87 DAMG3PK3PVK87TM DBMG5P5PVK87 DBMG9P4PVK87 DBMG13P3PVK87 DBMG17P2PVK87 DBMG21P1PVK87 DCMG8P8PVK87 DCMG13P6PVK87 DCMG17P5PVK87 DCMG21PA4PVK87 DCMG25P3PVK87 DCMG27P2PVK87 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: For tin plated PC tails add A226 (signal contacts only). Example DEMP5P1PVK87A226 For performance class 2 substitute K127 for K87. Example: DEMP5P1PVK127 Keyed. Engaging Face 3,30 (.130) MIN. A C B 11,94 0,25 (.470 .010) E D L 1,00 (.039) Screw lock, boardlock, and signal contacts removed for clarity 2,92 (.115) BOARDLOCK O 0,60 (.024) O 2,90 (.114) BRACKET, METAL 14,55 (.573) RIVNUT #4-40 UNC 10,85 (.427) 4,00 (.157) 2,54 (.100) 9,40 0,20 (.370 .008) F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 64 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power 90 -- European Footprint 10,2 or 9,4 mm (Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 252-253. For panel cutouts, see page 221. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Part Number Without Screw Locks Layout Without Boardlocks 5W1 DEMP5P1SVA197 7W2 DAMP7P2SVA197 11W1 DAMP11P1SVA197 3W3 DAMP3P3SVA197 3WK3 DAMP3PK3SVA197TM 5W5 DBMP5P5SVA197 9W4 DBMP9P4SVA197 13W3 DBMP13P3SVA197 17W2 DBMP17P2SVA197 21W1 DBMP21P1SVA197 8W8 DCMP8P8SVA197 13W6 DCMP13P6SVA197 17W5 DCMP17P5SVA197 21WA4 DCMP21PA4SVA197 25W3 DCMP25P3SVA197 27W2 DCMP27P2SVA197 Part Number Without Screw Locks With Boardlocks DEMC5P1SVA197 DAMC7P2SVA197 DAMC11P1SVA197 DAMC3P3SVA197 DAMC3PK3SVA197TM DBMC5P5SVA197 DBMC9P4SVA197 DBMC13P3SVA197 DBMC17P2SVA197 DBMC21P1SVA197 DCMC8P8SVA197 DCMC13P6SVA197 DCMC17P5SVA197 DCMC21PA4SVA197 DCMC25P3SVA197 DCMC27P2SVA197 Part Number With Screw Locks Without Boardlocks DEMD5P1SVA197 DAMD7P2SVA197 DAMD11P1SVA197 DAMD3P3SVA197 DAMD3PK3SVA197TM DBMD5P5SVA197 DBMD9P4SVA197 DBMD13P3SVA197 DBMD17P2SVA197 DBMD21P1SVA197 DCMD8P8SVA197 DCMD13P6SVA197 DCMD17P5SVA197 DCMD21PA4SVA197 DCMD25P3SVA197 DCMD27P2SVA197 Part Number With Screw Locks With Boardlocks DEMG5P1SVA197 DAMG7P2SVA197 DAMG11P1SVA197 DAMG3P3SVA197 DAMG3PK3SVA197TM DBMG5P5SVA197 DBMG9P4SVA197 DBMG13P3SVA197 DBMG17P2SVA197 DBMG21P1SVA197 DCMG8P8SVA197 DCMG13P6SVA197 DCMG17P5SVA197 DCMG21PA4SVA197 DCMG25P3SVA197 DCMG27P2SVA197 For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ. Notes: For performance class 2 substitute K126 for A197. Example: DEMP5P1SVK126 Keyed. Engaging Face 3,30 (.130) MIN. A C B 11,94 0,25 (.470 .010) E D L 1,00 (.039) Screw lock, boardlock, and signal contacts removed for clarity 2,92 (.115) BOARDLOCK O 0,60 (.024) O 2,90 (.114) 2,54 (.100) BRACKET, METAL 14,55 (.573) RIVNUT #4-40 UNC 10,85 (.427) 4,00 (.157) 9,40 0,20 (.370 .008) F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0.76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 65 Combo D D Subminiature 40 A High Power Straight -- Standard PC Tails (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 254-255. For panel cutouts, see page 221. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMV5H1PNK87 DAMV7H2PNK87 DAMV11H1PNK87 DAMV3H3PNK87 DAMV3HK3PNK87TM DBMV5H5PNK87 DBMV9H4PNK87 DBMV13H3PNK87 DBMV17H2PNK87 DBMV21H1PNK87 DCMV8H8PNK87 DCMV13H6PNK87 DCMV17H5PNK87 DCMV21HA4PNK87 DCMV25H3PNK87 DCMV27H2PNK87 Part Number Without Screw Locks With Boardlocks DEMZ5H1PNK87 DAMZ7H2PNK87 DAMZ11H1PNK87 DAMZ3H3PNK87 DAMZ3HK3PNK87TM DBMZ5H5PNK87 DBMZ9H4PNK87 DBMZ13H3PNK87 DBMZ17H2PNK87 DBMZ21H1PNK87 DCMZ8H8PNK87 DCMZ13H6PNK87 DCMZ17H5PNK87 DCMZ21HA4PNK87 DCMZ25H3PNK87 DCMZ27H2PNK87 Part Number With Screw Locks With Boardlocks DEMN5H1PNK87 DAMN7H2PNK87 DAMN11H1PNK87 DAMN3H3PNK87 DAMN3HK3PNK87TM DBMN5H5PNK87 DBMN9H4PNK87 DBMN13H3PNK87 DBMN17H2PNK87 DBMN21H1PNK87 DCMN8H8PNK87 DCMN13H6PNK87 DCMN17H5PNK87 DCMN21HA4PNK87 DCMN25H3PNK87 DCMN27H2PNK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMV5H1PNK127 For DD shell sizes, see page 68. Keyed. Engaging Face A C B D E 10 O 3,18 (.125) BOARDLOCK 4,65 (.183) O 0,76 (.030) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) L SCREW LOCK #4-40 UNC W F Screw lock, boardlock and high power contact removed for clarity Dimensions Shell Size DE DA DB DC 66 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power Straight -- Standard PC Tails (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 257-258. For panel cutouts, see page 221. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMV5H1SNA197 DAMV7H2SNA197 DAMV11H1SNA197 DAMV3H3SNA197 DAMV3HK3SNA197TM DBMV5H5SNA197 DBMV9H4SNA197 DBMV13H3SNA197 DBMV17H2SNA197 DBMV21H1SNA197 DCMV8H8SNA197 DCMV13H6SNA197 DCMV17H5SNA197 DCMV21HA4SNA197 DCMV25H3SNA197 DCMV27H2SNA197 Part Number Without Screw Locks With Boardlocks DEMZ5H1SNA197 DAMZ7H2SNA197 DAMZ11H1SNA197 DAMZ3H3SNA197 DAMZ3HK3SNA197TM DBMZ5H5SNA197 DBMZ9H4SNA197 DBMZ13H3SNA197 DBMZ17H2SNA197 DBMZ21H1SNA197 DCMZ8H8SNA197 DCMZ13H6SNA197 DCMZ17H5SNA197 DCMZ21HA4SNA197 DCMZ25H3SNA197 DCMZ27H2SNA197 Part Number With Screw Locks With Boardlocks DEMN5H1SNA197 DAMN7H2SNA197 DAMN11H1SNA197 DAMN3H3SNA197 DAMN3HK3SNA197TM DBMN5H5SNA197 DBMN9H4SNA197 DBMN13H3SNA197 DBMN17H2SNA197 DBMN21H1SNA197 DCMN8H8SNA197 DCMN13H6SNA197 DCMN17H5SNA197 DCMN21HA4SNA197 DCMN25H3SNA197 DCMN27H2SNA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMV5H1SNK126 For DD shell sizes, see page 69. Keyed. Engaging Face A C B D E 10 BOARDLOCK O 0,76 (.030) O 3,18 (.125) 4,65 (.183) 4,52 (.178) 2,84 (.112) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) L SCREW LOCK #4-40 UNC W F Screw lock, boardlock and high power contact removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 67 Combo D D Subminiature 40 A High Power Straight -- Standard PC Tails (Size DD) Plug Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24H7PNK87 DDMV36H4PNK87 DDMV43H2PNK87 DDMV47H1PNK87 Part Number Without Screw Locks With Boardlocks DDMZ24H7PNK87 DDMZ36H4PNK87 DDMZ43H2PNK87 DDMZ47H1PNK87 Part Number With Screw Locks With Boardlocks DDMN24H7PNK87 DDMN36H4PNK87 DDMN43H2PNK87 DDMN47H1PNK87 Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMV24H7PNK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 256. For panel cutouts, see page 221. Engaging Face A C B D E 10 O 3,18 (.125) BOARDLOCK 4,65 (.183) 5,69 (.224) O 0,76 (.030) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W L Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DD 68 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power Straight -- Standard PC Tails (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24H7SNA197 DDMV36H4SNA197 DDMV43H2SNA197 DDMV47H1SNA197 Part Number Without Screw Locks With Boardlocks DDMZ24H7SNA197 DDMZ36H4SNA197 DDMZ43H2SNA197 DDMZ47H1SNA197 Part Number With Screw Locks With Boardlocks DDMN24H7SNA197 DDMN36H4SNA197 DDMN43H2SNA197 DDMN47H1SNA197 Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMV24H7SNK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 259. For panel cutouts, see page 221. Engaging Face A C B D E 10 O 0,76 (.030) BOARDLOCK 5,69 (.224) O 3,18 (.125) 4,65 (.183) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W L Screw lock, boardlock and high power contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 69 Combo D D Subminiature 40 A High Power Straight -- European PC Tails (Sizes DE-DC) Part Numbers with Standoff #4-40 UNC Plug Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 254-255. For panel cutouts, see page 221. Part Number Without Screw Locks Without Boardlocks DEMV5H1PYK87 DAMV7H2PYK87 DAMV11H1PYK87 DAMV3H3PYK87 DAMV3HK3PYK87TM DBMV5H5PYK87 DBMV9H4PYK87 DBMV13H3PYK87 DBMV17H2PYK87 DBMV21H1PYK87 DCMV8H8PYK87 DCMV13H6PYK87 DCMV17H5PYK87 DCMV21HA4PYK87 DCMV25H3PYK87 DCMV27H2PYK87 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks With Boardlocks DEMZ5H1PYK87 DAMZ7H2PYK87 DAMZ11H1PYK87 DAMZ3H3PYK87 DAMZ3HK3PYK87TM DBMZ5H5PYK87 DBMZ9H4PYK87 DBMZ13H3PYK87 DBMZ17H2PYK87 DBMZ21H1PYK87 DCMZ8H8PYK87 DCMZ13H6PYK87 DCMZ17H5PYK87 DCMZ21HA4PYK87 DCMZ25H3PYK87 DCMZ27H2PYK87 Part Number With Screw Locks With Boardlocks DEMN5H1PYK87 DAMN7H2PYK87 DAMN11H1PYK87 DAMN3H3PYK87 DAMN3HK3PYK87TM DBMN5H5PYK87 DBMN9H4PYK87 DBMN13H3PYK87 DBMN17H2PYK87 DBMN21H1PYK87 DCMN8H8PYK87 DCMN13H6PYK87 DCMN17H5PYK87 DCMN21HA4PYK87 DCMN25H3PYK87 DCMN27H2PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For tin plated PC tails add A226 (signal contacts only). Example: DEMV5H1PYK87A226 For performance class 2 substitute K127 for K87. Example: DEMV5H1PYK127 For DD shell sizes, see page 72. Keyed. Engaging Face A C B D E 10 BOARDLOCK O 3,18 (.125) O 0,60 (.024) 4,65 (.183) 4,52 (.178) 7.62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W L SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DE DA DB DC 70 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power Straight -- European PC Tails (Sizes DE-DC) Part Numbers with Standoff #4-40 UNC Receptacle Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 257-258. For panel cutouts, see page 221. Part Number Without Screw Locks Without Boardlocks DEMV5H1SYA197 DAMV7H2SYA197 DAMV11H1SYA197 DAMV3H3SYA197 DAMV3HK3SYA197TM DBMV5H5SYA197 DBMV9H4SYA197 DBMV13H3SYA197 DBMV17H2SYA197 DBMV21H1SYA197 DCMV8H8SYA197 DCMV13H6SYA197 DCMV17H5SYA197 DCMV21HA4SYA197 DCMV25H3SYA197 DCMV27H2SYA197 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks With Boardlocks DEMZ5H1SYA197 DAMZ7H2SYA197 DAMZ11H1SYA197 DAMZ3H3SYA197 DAMZ3HK3SYA197TM DBMZ5H5SYA197 DBMZ9H4SYA197 DBMZ13H3SYA197 DBMZ17H2SYA197 DBMZ21H1SYA197 DCMZ8H8SYA197 DCMZ13H6SYA197 DCMZ17H5SYA197 DCMZ21HA4SYA197 DCMZ25H3SYA197 DCMZ27H2SYA197 Part Number With Screw Locks With Boardlocks DEMN5H1SYA197 DAMN7H2SYA197 DAMN11H1SYA197 DAMN3H3SYA197 DAMN3HK3SYA197TM DBMN5H5SYA197 DBMN9H4SYA197 DBMN13H3SYA197 DBMN17H2SYA197 DBMN21H1SYA197 DCMN8H8SYA197 DCMN13H6SYA197 DCMN17H5SYA197 DCMN21HA4SYA197 DCMN25H3SYA197 DCMN27H2SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For performance class 2 substitute K126 for A197. Example: DEMV5H1SYK126 For DD shell sizes, see page 73. Keyed. Engaging Face A C B E D 10 BOARDLOCK 4,65 (.183) O 3,18 (.125) O 0,60 (.024) 2,84 (.112) 4,52 (.178) 2,92 (.115) 7,62 0,25 (.300 .010) STANDOFF #4-40 UNC F L 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC W Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 71 Combo D D Subminiature 40 A High Power Straight -- European PC Tails (Size DD) Part Numbers with Standoff #4-40 UNC Plug Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24H7PYK87 DDMV36H4PYK87 DDMV43H2PYK87 DDMV47H1PYK87 Part Number Without Screw Locks With Boardlocks DDMZ24H7PYK87 DDMZ36H4PYK87 DDMZ43H2PYK87 DDMZ47H1PYK87 Part Number With Screw Locks With Boardlocks DDMN24H7PYK87 DDMN36H4PYK87 DDMN43H2PYK87 DDMN47H1PYK87 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: For tin plated PC tails add A226 (signal contacts only). Example DDMV24H7PYK87A226 For performance class 2 substitute K127 for K87. Example: DDMV24H7PYK127 Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 256. For panel cutouts, see page 221. Engaging Face A C B E D BOARDLOCK O 3,18 (.125) 5,69 (.224) O 0,60 (.024) 2,84 (.112) 4,52 (.178) 4,65 (.183) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) F W L SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DD 72 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 40 A High Power Straight -- European PC Tails (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMV24H7SYA197 DDMV36H4SYA197 DDMV43H2SYA197 DDMV47H1SYA197 Part Number Without Screw Locks With Boardlocks DDMZ24H7SYA197 DDMZ36H4SYA197 DDMZ43H2SYA197 DDMZ47H1SYA197 Part Number With Screw Locks With Boardlocks DDMN24H7SYA197 DDMN36H4SYA197 DDMN43H2SYA197 DDMN47H1SYA197 For M3 threads replace MV with MT, MZ with MQ, MN with MU. Note: For performance class 2 substitute K126 for A197. Example: DDMV24H7SYK126 Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 259. For panel cutouts, see page 221. Engaging Face A C B E D BOARDLOCK 4,65 (.183) O 3,18 (.125) O 0,60 (.024) 7,62 0,25 (.300 .010) 5,69 (.224) 2,84 (.112) 4,52 (.178) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W L Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 73 Combo D D Subminiature 90 PC Tail -- European Footprint 10,2 or 9,4 mm (Sizes DE-DD) Plug Part Numbers Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 260-262. For panel cutouts, see page 221. For hardware views (European), see page 227. Part Number Without Hardware DEM-5W1P-1A0N-K87 DAM-7W2P-1A0N-K87 DAM-11W1P-1A0N-K87 DAM-3W3P-1A0N-K87 DAM-3WK3P-1A0N-K87 DBM-5W5P-1A0N-K87 DBM-9W4P-1A0N-K87 DBM-13W3P-1A0N-K87 DBM-17W2P-1A0N-K87 DBM-21W1P-1A0N-K87 DCM-8W8P-1A0N-K87 DCM-13W6P-1A0N-K87 DCM-17W5P-1A0N-K87 DCM-21WA4P-1A0N-K87 DCM-25W3P-1A0N-K87 DCM-27W2P-1A0N-K87 DDM-24W7P-1A0N-K87 DDM-36W4P-1A0N-K87 DDM-43W2P-1A0N-K87 DDM-47W1P-1A0N-K87 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Part Number Metal Bracket With #4-40 Nut DEM-5W1P-1A7N-K87 DAM-7W2P-1A7N-K87 DAM-11W1P-1A7N-K87 DAM-3W3P-1A7N-K87 DAM-3WK3P-1A7N-K87 DBM-5W5P-1A7N-K87 DBM-9W4P-1A7N-K87 DBM-13W3P-1A7N-K87 DBM-17W2P-1A7N-K87 DBM-21W1P-1A7N-K87 DCM-8W8P-1A7N-K87 DCM-13W6P-1A7N-K87 DCM-17W5P-1A7N-K87 DCM-21WA4P-1A7N-K87 DCM-25W3P-1A7N-K87 DCM-27W2P-1A7N-K87 DDM-24W7P-1A7N-K87 DDM-36W4P-1A7N-K87 DDM-43W2P-1A7N-K87 DDM-47W1P-1A7N-K87 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-1A0N-A191-K87 Keyed. DD Configuration 2,54 (.100) Engaging Face 5,08 (.200) A 5,00 (.197) C B O 3,05 (.120) 9,40 0,20 (.370 .008) K D E L 10 O 0,60 (.024) 2,54 (.100) 5,00 (.197) 9,40 0,20 (.370 .008) F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 74 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature 90 PC Tail -- European Footprint 10,2 or 9,4 mm (Sizes DE-DD) Receptacle Part Numbers Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 263-265. For panel cutouts, see page 221. For hardware views (European), see page 227. Part Number Without Hardware DEM-5W1S-1A0N-A197 DAM-7W2S-1A0N-A197 DAM-11W1S-1A0N-A197 DAM-3W3S-1A0N-A197 DAM-3WK3S-1A0N-A197 DBM-5W5S-1A0N-A197 DBM-9W4S-1A0N-A197 DBM-13W3S-1A0N-A197 DBM-17W2S-1A0N-A197 DBM-21W1S-1A0N-A197 DCM-8W8S-1A0N-A197 DCM-13W6S-1A0N-A197 DCM-17W5S-1A0N-A197 DCM-21WA4S-1A0N-A197 DCM-25W3S-1A0N-A197 DCM-27W2S-1A0N-A197 DDM-24W7S-1A0N-A197 DDM-36W4S-1A0N-A197 DDM-43W2S-1A0N-A197 DDM-47W1S-1A0N-A197 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Part Number Metal Bracket With #4-40 Nut DEM-5W1S-1A7N-A197 DAM-7W2S-1A7N-A197 DAM-11W1S-1A7N-A197 DAM-3W3S-1A7N-A197 DAM-3WK3S-1A7N-A197 DBM-5W5S-1A7N-A197 DBM-9W4S-1A7N-A197 DBM-13W3S-1A7N-A197 DBM-17W2S-1A7N-A197 DBM-21W1S-1A7N-A197 DCM-8W8S-1A7N-A197 DCM-13W6S-1A7N-A197 DCM-17W5S-1A7N-A197 DCM-21WA4S-1A7N-A197 DCM-25W3S-1A7N-A197 DCM-27W2S-1A7N-A197 DDM-24W7S-1A7N-A197 DDM-36W4S-1A7N-A197 DDM-43W2S-1A7N-A197 DDM-47W1S-1A7N-A197 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-1A0N-A191-A197 Keyed. Engaging Face DD Configuration 2,54 (.100) A C O 3,05 (.120) B D E 5,00 (.197) 5,08 (.200) 9,40 0,20 (.370 .008) K L 10 O 0,60 (.024) 2,54 (.100) 5,00 (.197) 9,40 0,20 (.370 .008) F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 75 Combo D D Subminiature Straight PC Tails -- European (Sizes DE-DD) Plug Part Numbers Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 266-268. For panel cutouts, see page 221. For hardware views (European), see page 227. Part Number X 4,60 (.181) DEM-5W1P-OL2-K87 DAM-7W2P-OL2-K87 DAM-11W1P-OL2-K87 DAM-3W3P-OL2-K87 DAM-3WK3P-OL2-K87 DBM-5W5P-OL2-K87 DBM-9W4P-OL2-K87 DBM-13W3P-OL2-K87 DBM-17W2P-OL2-K87 DBM-21W1P-OL2-K87 DCM-8W8P-OL2-K87 DCM-13W6P-OL2-K87 DCM-17W5P-OL2-K87 DCM-21WA4P-OL2-K87 DCM-25W3P-OL2-K87 DCM-27W2P-OL2-K87 DDM-24W7P-OL2-K87 DDM-36W4P-OL2-K87 DDM-43W2P-OL2-K87 DDM-47W1P-OL2-K87 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Part Number X 6,05 (.238) DEM-5W1P-OL4-K87 DAM-7W2P-OL4-K87 DAM-11W1P-OL4-K87 DAM-3W3P-OL4-K87 DAM-3WK3P-OL4-K87 DBM-5W5P-OL4-K87 DBM-9W4P-OL4-K87 DBM-13W3P-OL4-K87 DBM-17W2P-OL4-K87 DBM-21W1P-OL4-K87 DCM-8W8P-OL4-K87 DCM-13W6P-OL4-K87 DCM-17W5P-OL4-K87 DCM-21WA4P-OL4-K87 DCM-25W3P-OL4-K87 DCM-27W2P-OL4-K87 DDM-24W7P-OL4-K87 DDM-36W4P-OL4-K87 DDM-43W2P-OL4-K87 DDM-47W1P-OL4-K87 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-OL2-A191-K87 Keyed. DD Configuration 5,69 (.224) Engaging Face 2,84 (.112) A C O 3,05 (.120) B K D E L 10 O 0,60 (.024) 2,84 (.112) X F W Dimensions Shell Size DE DA DB DC DD 76 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Straight PC Tails -- European (Sizes DE-DD) Receptacle Part Numbers Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 269-271. For panel cutouts, see page 221. For hardware views (European), see page 227. Part Number X 4.60 (.181) DEM-5W1S-OL2-A197 DAM-7W2S-OL2-A197 DAM-11W1S-OL2-A197 DAM-3W3S-OL2-A197 DAM-3WK3S-OL2-A197 DBM-5W5S-OL2-A197 DBM-9W4S-OL2-A197 DBM-13W3S-OL2-A197 DBM-17W2S-OL2-A197 DBM-21W1S-OL2-A197 DCM-8W8S-OL2-A197 DCM-13W6S-OL2-A197 DCM-17W5S-OL2-A197 DCM-21WA4S-OL2-A197 DCM-25W3S-OL2-A197 DCM-27W2S-OL2-A197 DDM-24W7S-OL2-A197 DDM-36W4S-OL2-A197 DDM-43W2S-OL2-A197 DDM-47W1S-OL2-A197 Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Part Number X 6.05 (.238) DEM-5W1S-OL4-A197 DAM-7W2S-OL4-A197 DAM-11W1S-OL4-A197 DAM-3W3S-OL4-A197 DAM-3WK3S-OL4-A197 DBM-5W5S-OL4-A197 DBM-9W4S-OL4-A197 DBM-13W3S-OL4-A197 DBM-17W2S-OL4-A197 DBM-21W1S-OL4-A197 DCM-8W8S-OL4-A197 DCM-13W6S-OL4-A197 DCM-17W5S-OL4-A197 DCM-21WA4S-OL4-A197 DCM-25W3S-OL4-A197 DCM-27W2S-OL4-A197 DDM-24W7S-OL4-A197 DDM-36W4S-OL4-A197 DDM-43W2S-OL4-A197 DDM-47W1S-OL4-A197 Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-OL2-A191-A197 Keyed. DD Configuration 5,69 (.224) Engaging Face 2,84 (.112) A C O 3,05 (.120) B K D E L 10 2,84 (.112) O 0,60 (.024) X F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 77 Combo D D Subminiature Solder Cup (Sizes DE-DD) Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 222. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Through Hole DEM5W1PK87 DAM7W2PK87 DAM11W1PK87 DAM3W3PK87 DAM3WK3PK87 DBMP5W5PK87 DBM9W4PK87 DBM13W3PK87 DBM17W2PK87 DBM21W1PK87 DCM8W8PK87 DCM13W6PK87 DCM17W5PK87 DCM21WA4PK87 DCM25W3PK87 DCM27W2PK87 DDM24W7PK87 DDM36W4PK87 DDM43W2PK87 DDM47W1PK87 Dual Float Mount DEMY5W1PK87 DAMY7W2PK87 DAMY11W1PK87 DAMY3W3PK87 DAMY3WK3PK87 DBMY5W5PK87 DBMY9W4PK87 DBMY13W3PK87 DBMY17W2PK87 DBMY21W1PK87 DCMY8W8PK87 DCMY13W6PK87 DCMY17W5PK87 DCMY21WA4PK87 DCMY25W3PK87 DCMY27W2PK87 DDMY24W7PK87 DDMY36W4PK87 DDMY43W2PK87 DDMY47W1PK87 Clinch Nut #4-40 UNC DEME5W1PK87 DAME7W2PK87 DAME11W1PK87 DAME3W3PK87 DAME3WK3PK87 DBME5W5PK87 DBME9W4PK87 DBME13W3PK87 DBME17W2PK87 DBME21W1PK87 DCME8W8PK87 DCME13W6PK87 DCME17W5PK87 DCME21WA4PK87 DCME25W3PK87 DCME27W2PK87 DDME24W7PK87 DDME36W4PK87 DDME43W2PK87 DDME47W1PK87 For contacts with 30 microinches gold substitute K127 for K87. Example: DEM5W1PK127 For M3 clinch nuts substitute X for E. Example: DEMX5W1PK87 Keyed. Engaging Face DD Configuration 5,69 (.224) A C 2,84 (.112) O 3,05 (.120) B K D E L 10 10,72 (.422) MAX 2,84 (.112) F W Dimensions Shell Size DE DA DB DC DD 78 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Solder Cup (Sizes DE-DD) Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 223. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Dual Float Mount DEMY5W1SA197 DAMY7W2SA197 DAMY11W1SA197 DAMY3W3SA197 DAMY3WK3SA197 DBMY5W5SA197 DBMY9W4SA197 DBMY13W3SA197 DBMY17W2SA197 DBMY21W1SA197 DCMY8W8SA197 DCMY13W6SA197 DCMY17W5SA197 DCMY21WA4SA197 DCMY25W3SA197 DCMY27W2SA197 DDMY24W7SA197 DDMY36W4SA197 DDMY43W2SA197 DDMY47W1SA197 Through Hole DEM5W1SA197 DAM7W2SA197 DAM11W1SA197 DAM3W3SA197 DAM3WK3SA197 DBM5W5SA197 DBM9W4SA197 DBM13W3SA197 DBM17W2SA197 DBM21W1SA197 DCM8W8SA197 DCM13W6SA197 DCM17W5SA197 DCM21WA4SA197 DCM25W3SA197 DCM27W2SA197 DDM24W7SA197 DDM36W4SA197 DDM43W2SA197 DDM47W1SA197 Clinch Nut #4-40 UNC DEME5W1SA197 DAME7W2SA197 DAME11W1SA197 DAME3W3SA197 DAME3WK3SA197 DBME5W5SA197 DBME9W4SA197 DBME13W3SA197 DBME17W2SA197 DBME21W1SA197 DCME8W8SA197 DCME13W6SA197 DCME17W5SA197 DCME21WA4SA197 DCME25W3SA197 DCME27W2SA197 DDME24W7SA197 DDME36W4SA197 DDME43W2SA197 DDME47W1SA197 For contacts with 30 microinches gold substitute K126 for A197. Example: DEM5W1SK126 For M3 clinch nuts substitute X for E. Example: DEMX5W1SA197 Keyed. DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B K E D L 10 2,84 (.112) 9,91 (.390) MAX F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.123) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 79 Combo D D Subminiature Crimp Cable Connectors without Contacts (Sizes DA-DD) Part Numbers Plug Shell Size DA DA DA DB DB DB DB DB DC DC DC DD DD Reader's Resource For contact cavity arrangements, see page 222. For panel cutouts, see page 221. Layout 7W2 11W1 3W3 5W5 9W4 13W3 17W2 21W1 8W8 21WA4 25W3 24W7 36W4 Part Number DAA7W2PK87F0 DAA11W1PK87F0 DAA3W3PK87F0 DBA5W5PK87F0 DBA9W4PK87F0 DBA13W3PK87F0 DBA17W2PK87F0 DBA21W1PK87F0 DCA8W8PK87F0 DCA21WA4PK87F0 DCA25W3PK87F0 DDA24W7PK87F0 DDA36W4PK87F0 Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275. L 10,92 (.430) MAX K Engaging Face A C B 10 D E Dimensions Shell Size DE DA DB DC DD 80 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Crimp Cable Connectors without Contacts (Sizes DA-DD) Receptacle Part Numbers Shell Size DA DA DA DB DB DB DB DB DC DC DD DD Reader's Resource For contact cavity arrangements, see page 223. For panel cutouts, see page 221. Layout 7W2 11W1 3W3 5W5 9W4 13W3 17W2 21W1 8W8 21WA4 24W7 36W4 Part Number DAA7W2SA197F0 DAA11W1SA197F0 DAA3W3SA197F0 DBA5W5SA197F0 DBA9W4SA197F0 DBA13W3SA197F0 DBA17W2SA197F0 DBA21W1SA197F0 DCA8W8SA197F0 DCA21WA4SA197F0 DDA24W7SA197F0 DDA36W4SA197F0 Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275. L 10,92 (.430) MAX K Engaging Face A C B 10 E D Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,317 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 81 Combo D D Subminiature Shield Cans X Cable 4,8 - 5,5 5,5 - 6,2 6,2 - 7,2 7,2 - 8,2 8,2 - 9,5 9,5 - 11,1 Ferrule XA 6,25 (.246) 6,25 (.246) 8,20 (.323) 8,20 (.323) 11,50 (.452) 11,50 (.452) Ferrule Part Number 304-8810-000 304-8810-000 304-8811-000 304-8811-000 304-8812-000 304-8813-000 Crimp Tool Position B A B A B A Materials and Finishes Part Numbers Top Can (B size): Bottom Can (B size): Crimp Tool Part Number D115433-1 D115433-1 D115433-2 D115433-2 D115433-3 D115433-3 348-8946-000 348-8945-000 Note: For other available can sizes, consult factory for details. Shield Can and Ferrule Material: Steel Finish: Tin Order 1 top can, 1 bottom can, 1 ferrule per connector. FERRULE CABLE O 10,00 (.394) 10,10 (.398) Ferrule Wire Trim Dimensions Crimp Tool Positions 11,25(.443) O 11,10(.437) OA 10,00(.394) 50,00 (1.969) 82 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Crimp (Size 20) Contacts Loose Contacts Stamped contacts with insulation support are supplied loose for use with hand crimp tooling. Two sizes are available to accommodate wire ranges 20 - 26 AWG. Pin Contact Socket Contact Part Number Pin Contact Finish 30 inches Gold over Nickel 24-26 AWG 030-2487-017 Part Number Socket Contact 20-24 AWG 030-2487-016 24-26 AWG 030-2488-017 20-24 AWG 030-2488-016 For tooling, see this page. Reeled Contacts (5,000 Pieces per Reel) Stamped contacts with insulation support are supplied on reels of 5,000 for use with semiautomatic strip and crimp machines. Two sizes are available to accommodate wire ranges 20 - 26 AWG. Pin Contacts Socket Contacts Part Number Pin Contact Finish Gold over Nickel 30 inches Gold over Nickel 24-26 AWG 980-2000-925 980-2000-946 Part Number Socket Contact 20-24 AWG 980-2000-924 980-2000-945 24-26 AWG 980-2000-926 980-2000-944 20-24 AWG 980-2000-923 980-2000-943 For semi-automatic tooling, see page 275. Pin Contacts Socket Contacts Tooling CCT-D*A-1 Hand Crimp Tool Description CCT-D*A-1 Part Number 995-2000-000 Extraction Tool Description CIET-D*A-20-24 CIET-D*A-24-26 Part Number 980-0008-135 980-0008-136 Wire Size 20-24 AWG 24-26 AWG For semi-automatic tooling, see page 275. Dimensions are shown in mm (inch) Dimensions subject to change 83 Combo D D Subminiature Cable (Size 8) Loose Contacts -- Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (Body, Ferrule, Center Contact) Stamped Crimp/Crimp Plug Receptacle Kit Gold over Ni D130322-2 D130344-1 Kit 30 in. Gold over Ni D130322-1 D130344 Kit 50 in. Gold over Ni D130322-6 D130344-2 RG Cable Number 179/U 179/U Center Contact Gold over Ni 10,000 Reel 110238-1015 110238-1014 Center Contact 30 in. Gold over Ni 10,000 Reel 110238-1012 110238-1013 Loose Components for High Volume (3 Pieces -- Body, Ferrule, Center Contact) Stamped Crimp/Crimp Plug Receptacle Tooling for Stamped Crimp/Crimp Body 249-2272-000 249-2271-000 Ferrule 304-0444-000 304-0444-000 Description Stamped Center Conductor Stamped Outer Conductor Crimping Tool Hand Crimp, ``B'' Crimp Semi-Automatic Crimper Hand Tool, Hex Crimp Pneumatic Hex Crimp Tool Number CCTP-750HM ABT-607 (Leased) CCTP-DM 995-2000-094 For semi-automatic tooling, see page 275. 84 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Cable (Size 8) Loose Contacts -- Coaxial 75 Ohm -- 90 90 Crimp Braid/Solder Center Contact Plug Receptacle Part Number Gold over Ni D130357-1 D130356-1 17,30 (.680) REF Part Number 30 in. Gold over Ni D130357 D130356 Part Number 50 in. Gold over Ni D130357-4 D130356-3 17,53 (.690) REF 0,16 (.006) REF O 4,79(.189) REF 5,10 (.200) REF Plug Note: Ferrule not shown. Receptacle Note: Ferrule not shown. Tooling for 90 Crimp Braid Description Hand Tool: Die Set: Part Number 995-0001-761 995-2000-110 Dimensions are shown in mm (inch) Dimensions subject to change 85 Combo D D Subminiature Cable (Size 8) Loose Contacts -- Coaxial 50 Ohm -- Straight Straight Crimp Braid Plug Receptacle Note: Dimensions include outer sleeve. Plug Plug Part Number Gold Over Nickel DM53740 DM53740-1 Part Number 50 in. Gold Over Copper DM53740-17 DM53740-15 A max. 18,80 (.739) 18,80 (.739) B max. 24,00 (.945) 24,00 (.945) D min. 1,00 (.040) 1,70 (.067) Plug Plug Plug Receptacle Receptacle DM53740-35 DM53740-3 DM53740-5 DM53742 DM53742-1 -- DM53740-16 DM53740-18 DM53742-18 DM53742-16 18,80 (.739) 21,50 (.847) 21,50 (.847) 18,80 (.739) 18,80 (.739) 24,00 (.945) 26,34 (1.037) 26,34 (1.037) 24,00 (.945) 24,00 (.945) 1,70 (.067) 2,79 (.110) 3,18 (.125) 1,00 (.040) 1,70 (.067) Receptacle Receptacle Receptacle DM53742-36 DM53742-3 DM53742-5 -- DM53742-17 DM53742-19 18,80 (.739) 21,50 (.847) 21,50 (.847) 24,00 (.945) 26,34 (1.037) 26,34 (1.037) 1,70 (.067) 2,79 (.110) 3,18 (.125) RG Cable Number Old 196/U 187/U 188/U -- 195/U 58/U 196/U 187/U 188/U -- 195/U 58/U New 178B/U 179B/U 316B/U RD316 180B/U 58B/U 178B/U 179B/U 316B/U RD316 180B/U 58B/U For crimp tooling, see page 89. Straight Solder Braid Plug 86 Receptacle Plug Plug Part Number Gold Over Nickel DM53740-5008 DM53740-5001 Part Number 50 in. Gold Over Copper DM53740-5105 DM53740-5099 A max. 18,80 (.739) 18,80 (.739) B max. 24,00 (.945) 24,00 (.945) D min. 1,00 (.040) 1,70 (.067) Plug Plug Plug Plug (Short Type) Receptacle Receptacle DM53740-5145 DM53740-5002 DM53740-5005 DM53740-5000 DM53742-5006 DM53742-5001 -- DM53740-5104 DM53740-5101 DM53740-5100 DM53742-5092 DM53742-5089 18,80 (.739) 21,50 (.847) 21,50 (.847) 17,00 (.670) 18,80 (.739) 18,80 (.739) 24,00 (.945) 26,34 (1.037) 26,34 (1.037) 22,20 (.874) 24,00 (.945) 24,00 (.945) 1,70 (.067) 2,79 (.110) 3,18 (.125) 1,14 (.045) 1,00 (.040) 1,70 (.067) Receptacle Receptacle Receptacle Receptacle (Short Type) DM53742-5126 DM53742-5002 DM53742-5004 DM53742-5000 -- DM53742-5091 DM53742-5086 DM53742-5085 18,80 (.739) 21,50 (.847) 21,50 (.847) 17,00 (.670) 24,00 (.945) 26,34 (1.037) 26,34 (1.037) 22,20 (.874) 1,70 (.067) 2,79 (.110) 3,18 (.125) 1,14 (.045) RG Cable Number Old 196/U 187/U 188/U -- 195/U 58/U 196/U 196/U 187/U 188/U -- 195/U 58/U 196/U New 178B/U 179B/U 316B/U RD316 180B/U 58/U 178B/U 178B/U 179B/U 316B/U RD316 180B/U 58/U 178B/U Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Cable (Size 8) Loose Contacts -- Coaxial 50 Ohm -- 90 90 Crimp Braid Plug Receptacle Note: Dimensions include outer sleeve. Part Number Gold Over Nickel DM53741 DM53741-1 Part Number 50 in. Gold Over Copper DM53741-12 DM53741-11 A max. 13,46 (.530) 13,46 (.530) B max. 18,92 (.745) 18,92 (.745) C 15,10 (.594) 15,10 (.594) D 0,13 (.005) 1,14 (.045) 1,83 (.072) Plug Plug Receptacle Receptacle DM53741-3 DM53741-4 DM53743-2 DM53743-3 DM53741-10 DM53741-13 DM53743-18 DM53743-16 13,46 (.530) 13,46 (.530) 13,46 (.530) 13,46 (.530) 18,92 (.745) 18,92 (.745) 18,92 (.745) 18,92 (.745) 16,00 (.630) 16,00 (.630) 15,09 (.594) 15,09 (.594) 2,79 (.110) 3,18 (.125) 1,14 (.045) 1,83 (.072) Receptacle Receptacle DM53743-5 DM53743-6 DM53743-17 DM53743-19 13,46 (.530) 13,46 (.530) 18,92 (.745) 18,92 (.745) 16,00 (.630) 16,00 (.630) 2,79 (.110) 3,18 (.125) Plug Plug RG Cable Number Old New 196/U 178B/U 187/U 179B/U 188/U 316B/U 195/U 180B/U 58/U 58B/U 196/U 178B/U 187/U 179B/U 188/U 316B/U 195/U 180B/U 58/U 58B/U For crimp tooling, see page 89. 90 Solder Braid Plug Receptacle Part Number Gold Over Nickel DM53741-5000 DM53741-5001 Part Number 50 in. Gold Over Copper DM53741-5059 DM53741-5062 A max. 13,46 (.530) 13,46 (.530) B max. 18,92 (.745) 18,92 (.745) C 15,10 (.594) 15,10 (.594) D min. 1,00 (.040) 1,70 (.067) Plug Plug Receptacle Receptacle DM53741-5003 DM53741-5004 DM53743-5000 DM53743-5001 DM53741-5063 DM53741-5060 DM53743-5073 DM53743-5076 13,46 (.530) 13,46 (.530) 13,46 (.530) 13,46 (.530) 18,92 (.745) 18,92 (.745) 18,92 (.745) 18,92 (.745) 16,00 (.630) 16,00 (.630) 15,09 (.594) 15,09 (.594) 2,79 (.110) 3,18 (.125) 1,00 (.040) 1,70 (.067) Receptacle Receptacle DM53743-5003 DM53743-5004 DM53743-5077 DM53743-5074 13,46 (.530) 13,46 (.530) 18,92 (.745) 18,92 (.745) 16,00 (.630) 16,00 (.630) 2,79 (.110) 3,18 (.125) Plug Plug RG Cable Number Old New 196/U 178B/U 187/U 179B/U 188/U 316B/U 195/U 180B/U 58/U 58/U 196/U 178B/U 187/U 179B/U 188/U 316B/U 195/U 180B/U 58/U 58B/U Dimensions are shown in mm (inch) Dimensions subject to change 87 Combo D D Subminiature Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts Insertion Tool No insertion tool is required. The contact is easily snapped in from the rear of the connector manually. Insertion Instructions Extraction Tool CET-C6B-2 Operating Instructions The CET-C6B-2 tool extracts all coaxial, high power and high voltage contacts (plug and receptacle). Description CET-C6B-2 88 Part Number 070064-0002 To extract the coaxial contact, hold the tool by the body and insert the tip into the front of the contact cavity until it bottoms and closes the coaxial retaining ring. Holding the body in this position securely enough to keep coaxial retaining ring closed, push the plunger; contact will be pushed out of the rear of the assembly. Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Coaxial Assembly Instructions Straight and 90 Coaxial Assembly STEP 1: Slide the outer ring over the cable jacket. Trim the cable as specified in the table of Coaxial Cable Trim Dimensions (see this page). Insert the cable dielectric and center conductor into the inside diameter of the inner sleeve. Then solder the center conductor to the coaxial center contact. Straight Coaxial 90 Coaxial Straight and 90 Coaxial Assembly STEP 2: Slide the outer ring forward until it is flush with the coaxial shell containing the braid between the outer ring and the inner sleeve. For solder type coaxes, soft solder the outer ring to the assembly through the cross-drilled solder hold. For crimp type coaxes, crimp with the appropriate tool in the area defined. Straight Coaxial 90 Coaxial Coaxial Cable Trim Dimensions RG Cable Number 196/U, 178B/U, 187/U, 188/U, 179B/U, 316B/U 195/U, 180B/U, 58/U, 58B/U Crimp Tooling RG Cable Number 196/U, 178B/U 187/U, 179B/U, 188/U, 316B/U 195/U, 180B/U, 58/U, 58B/U N 0,25 (.010) Straight Coaxial O 0,25 (.010) P 0,25 (.010) N 0,25 (.010) 90 Coaxial O 0,25 (.010) P 0,25 (.010) 7,92 (.312) 6,35 (.250) 1,98 (.078) 9,52 (.375) 5,94 (.234) 1,57 (.062) 9,52 (.375) 7,92 (.312) 1,98 (.078) 10,69 (.422) 7,92 (.312) 2,39 (.094) Tool Part Number 070051-0000 Description CCT-DM Closure C 070051-0000 CCT-DM B 070051-0000 CCT-DM A Hand tool with integral die set for all coaxial straight crimp braid. Dimensions are shown in mm (inch) Dimensions subject to change 89 Combo D D Subminiature Cable (Size 8) Loose Contacts -- High Power -- Solder Plug Part Number Gold Over Nickel DM53745-1 DM53745-7 DM53745-8 Part Number 50 in. Gold over Ni DM53745-28 DM53745-27 DM53745-25 Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Part Number Gold Over Nickel DM53744-1 DM53744-6 DM53744-7 Part Number 50 in. Gold over Ni DM53744-21 DM53744-25 DM53744-24 Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Receptacle Cable (Size 8) Loose Contacts -- High Power -- Crimp Plug Recommended Wire Trim Length Part Number Gold Over Nickel DM130338-4 DM130339-4 DM130340-4 Receptacle Part Number 30 in. Gold over Ni DM130338 DM130339 DM130340 Part Number 50 in. Gold over Ni DM130338-1 DM130339-1 DM130340-1 20,93 - 20,42 (.824 - .804) XA max. 4,60 (.181) 2,54 (.100) 1,07 (.067) XB max. 5,84 (.230) 5,54 (.218) 2,59 (.102) Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Recommended Wire Trim Length OB OA Part Number Gold Over Nickel DM130341-4 DM130342-4 DM130343-4 Part Number 30 in. Gold over Ni DM130341 DM130342 DM130343 Part Number 50 in. Gold over Ni DM130341-1 DM130342-1 DM130343-1 XA max. 4,60 (.181) 2,54 (.100) 1,07 (.067) XB max. 5,84 (.230) 5,54 (.218) 2,59 (.102) Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG High Power Crimp Tooling M300-BT Wire Size 8 AWG 10 AWG 12/14 AWG 16 AWG 18 AWG 90 Crimp Tool M300-BT M300-BT M300-BT FT-8 FT-8 Crimp Tool/Locator Tool Setting Number 6 5 1 6 5 Locator TP968 TP968 TP968 TH554 TH554 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature Cable (Size 8) Loose Contacts -- High Voltage -- Straight Plug 18,64 (.734) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Gold over Ni DM51157 Part Number 50 in. Gold DM51157-8 Wire Size 20 AWG Part Number 50 in. Gold DM51155-7 Wire Size 20 AWG Part Number 50 in. Gold DM51157-5005 Wire Size 20 AWG Part Number 50 in. Gold DM51155-5004 Wire Size 20 AWG Receptacle 19,41(.764) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Gold over Ni DM51155 Cable (Size 8) Loose Contacts -- High Voltage -- 90 Plug 17,70 (.697) REF INSULATOR RING, RETAINING For tooling, see page 88. Part Number Gold over Ni DM51157-5000 Receptacle 17,70 (.697) REF INSULATOR RING, RETAINER For tooling, see page 88. Part Number Gold over Ni DM51155-5000 Dimensions are shown in mm (inch) Dimensions subject to change 91 Combo D D Subminiature PCB (Size 8) Loose Contacts -- Coaxial 75 Ohm -- Straight Plug 17,78 (.700) O 0,51 (.020) 5,08 (.200) Description Plug Part Number DM130358-2 4,19 (.165) 0,25 (.010) Receptacle 18,00 (.708) O 0,61 (.024) 5,08 (.200) Description Receptacle Part Number DM130346-2 4,19 (.165) 0,25 (.010) PCB (Size 8) Loose Contacts -- Coaxial 75 Ohm -- 90 Plug 20,32 (.800) 10,26 (.404) 3,81 (.150) Description Plug Part Number DM130352-2 5,08 (.200) O 0,51 (.020) Receptacle 20,32 (.800) 10,23 (.403) 3,81 (.150) Description Receptacle 92 Part Number DM130321-3 5,08 (.200) O 0,61 (.024) Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature PCB (Size 8) Loose Contacts -- High Power -- Straight Pin 18,23 0,25 (.718 .010) Description Pin 3,18 0,13 (.125 .005) Part Number DM53745-110 Socket 18,19 0,25 (.716 .010) 3,18 0,13 (.125 .005) Description Socket Part Number DM53744-98 PCB (Size 8) Loose Contacts -- High Power --90 Pin B A OC Shell Size DE, DA, DB, DC DD European Footprint DE, DA, DB, DC, DD Socket Part Number DM53745-104 DM53745-107 DM53745-120 A 0,25 (.010) 10,62 (.418) 13,41 (.528) 18,06 (.711) B 0,25 (.010) 26,64 (1.049) 26,64 (1.049) 11,00 (.433) XC 0,13 (.005) 3,18 (.125) 3,18 (.125) 2,90 (.114) B A OC Shell Size DE, DA, DB, DC DD European Footprint DE, DA, DB, DC, DD Part Number DM53744-92 DM53744-95 DM53744-107 A 0,25 (.010) 13,41 (.528) 10,62 (.418) 11,00 (.433) B 0,25 (.010) 26,52 (1.044) 26,52 (1.044) 17,93 (.706) XC 0,13 (.005) 3,18 (.125) 3,18 (.125) 2,90 (.114) Dimensions are shown in mm (inch) Dimensions subject to change 93 Combo D D Subminiature PCB (Size 8) Loose Contacts -- High Voltage -- Straight Plug 15,95 (.628) REF CONTACT, PIN 5,94 - 5,44 (.234 - .214) O 4,88 (.192) MAX 1,52 - 1,27 (.060 - .050) O 5,72 - 5,33 (.225 - .210) INSULATOR O 1,65 - 1,50 (.065 - .059) O 3,68 - 3,53 (.145 -.139) RING, RETAINING Part Number Gold over Ni DM51157-13 Part Number 50 in. Gold DM51157-14 Receptacle 16,76 (.660) REF CONTACT, SKT O 4,88 (.192) MAX O 5,72 - 5,33 (.225 - .210) 0,25 - 0,00 (.010 - .000) O 1,65 - 1,50 (.065 - .059) Part Number Gold over Ni DM51155-12 94 6,48 - 6,22 (.255 - .245) INSULATOR RING, RETAINING Part Number 50 in. Gold DM51155-13 Dimensions are shown in mm (inch) Dimensions subject to change Combo D D Subminiature PCB Guide Pin and Socket Installs into any Combo D, Size 8 cavity. This guide pin and socket system is ideal for blind mate applications where space is limited. PCB Guide Pin 29,21 (1.150) REF 3,68 - 3,43 (.145 - .135) Part Number DM53745-126 Material Copper Alloy Finish Tin 11,43 (.450) REF O 5,66 - 5,41 (.223 - .213) O 3,25 - 3,10 (.128 - .122) RING, RETAINING PCB Guide Socket 4,06 (.160) Part Number 248-2967-000 Material Copper Alloy Finish Tin 16,28 (.641) REF CONNECTOR REAR INSULATOR REF Dimensions are shown in mm (inch) Dimensions subject to change 95 D Subminiature Selection Index Commercial Micro D -- MDSM Page Commercial Shielded Micro D An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Locking/Latching Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Cable Assemblies -- Pigtail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PCB Connector 90 -- Single or Stacked. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Cable Connectors (Unassembled Components) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 MDSM SSA Compatible Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 96 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Commercial Micro D -- MDSM M DSM is the commercial industry's smallest D-type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional D Subminiature connector, MDSM is designed for situations where space and EMI shielding are the primary design drivers. Unlike other micro connectors, MDSM's rugged construction and unique contact design combined with a PdNi contact finish provide durability of 10,000 mating cycles. All of this comes in a sleek package that includes a snap together shield can and a slide over boot producing a cable assembly with an overmolded look and a low assembled cost. MDSM is an ideal solution for applications where size, shielding, durability and aesthetics are key design criteria. Applications: Electronic Notepads VME Cards Multiplexors Serial Storage Devices Computer Workstations Hand Held Devices Bar Code Scanners Product Features 1,27 (.050) Pitch / Saves Space Fully Shielded / Reduces EMI Crimp Contacts / Applied Cost Savings Accessories Included / Fewer Part Numbers PdNi Plating / 10,000 Mating Cycles Stacked Versions / Saves Horizontal Space Slide Over Boot / Results in Overmolded Appearance Choice of Two Different Latching Options (Thumbscrew / Push-Pull) Approvals & Certifications SSA (Serial Storage Architecture) U.L. File Number E8572 ISO 9001 Specifications Temperature Rating Current Rating Contact Resistance Insulation Resistance Dielectric Withstanding Voltage Durability Shock / Vibration Wire Size - 55C to 125C 1 A -- temp dependent 20 m Max. 5000 M Min. 350 V at Sea Level 10,000 Mating Cycles 50 G's / 50 G's 26 to 30 AWG Materials and Finishes Description Shell Shield Can Cover Insulator Contacts Material Steel Steel Steel Thermoplastic, UL94 V-O Copper Alloy Finish Nickel Tin Tin None Gold flash over 30 microinches PdNi in mating area, Tin on balance Contact Arrangements (Face View of Pin Insert -- Use Mirror Image for Socket Side) 9 Contacts 15 Contacts 25 Contacts Dimensions are shown in mm (inch) Dimensions subject to change 97 D Subminiature C ommercial M icro D -- M DSM Locking/Latching Options Jackscrew Push/Pull The jackscrew locking system is designed for applications which require a secure connection. Utilize thumbscrews when the connectors are infrequently unmated. The push/pull latching system is designed for applications which require a quick connect and disconnect. A spring retention mechanism latches to a post on the board side to prevent unintentional unmatings. Z10 Jackpost Z42 Jackpost #2-56 UNC 3,18 (.125) HE X (AC R OS S F LAT S ) 1,25 (.049) Note: Two Jackposts supplied with boardside connectors. #2-56 UNC 6,45 (.254) 3,25 (.128) 1,25 (.049) 0,52 (.020) 6,45 (.254) Note: Two Jackposts supplied with boardside connectors. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Commercial Micro D -- MDSM PCB Connector 90 - Single Note: Standard jackpost offering recommended for use with .060 panel. No. of Contacts 9 15 25 Part Numbers - Single Thumbscrew Push/Pull MDSM-9PE-Z10-VR25* MDSM-9E-Z42-VR25* MDSM-15PE-Z10-VR22 MDSM-15PE-Z42-VR22 MDSM-25PE-Z10-VR17 MDSM-25PE-Z42-VR17 A max. 19,90 (.783) 23,60 (.929) 29,95 (1.179) B 14,35 (.565) 18,16 (.715) 24,51 (.965) C max. 8,60 (.339) 12,30 (.484) 18,65 (.734) D max. 9,00 (.354) 12,90 (.508) 19,25 (.758) E 5,08 (.200) 8,89 (.350) 15,24 (.600) F 0,05 (.002) 10,24 (.403) 14,01 (.551) 20,35 (.801) A max. 19,90 (.783) 23,50 (.925) B 14,35 (.565) 18,16 (.715) C max. 8,60 (.339) 12,30 (.484) D max. 9,00 (.354) 12,71 (.500) E 5,08 (.200) 8,89 (.350) F 10,24 (.403) 14,00 (.551) *For use with SSA applications PCB Connector 90 - Stacked No. of Contacts 18 30 Part Numbers - Stacked Thumbscrew Push/Pull MDSM-18PE-Z10-VR25* MDSM-18PE-Z42-VR25* MDSM-30PE-Z10-VR22 MDSM-30PE-Z42-VR22 *For use with SSA applications Dimensions are shown in mm (inch) Dimensions subject to change 99 D Subminiature Commercial Micro D -- MDSM Cable Connectors (Unassembled Components) Jackscrew JACKSCREW HOOD SHELL/SHIELD ASSEMBLY CABLE (CUSTOMER SUPPLIED) CRIMP CONTACTS (PURCHASED SEPARATELY) Cable connectors are supplied as complete kits with insulator, hood, locking hardware, shell/ shield assembly, and cover, bulk packaged. INSULATOR SHELL COVER Push/Pull 8,00 (.315) HOOD D SHELL/SHIELD ASSEMBLY CABLE (CUSTOMER SUPPLIED) CRIMP CONTACTS (PURCHASED SEPARATELY) INSULATOR SHELL COVER Cable connectors are supplied as complete kits with insulator, hood, shell/shield assembly, and cover, bulk packaged. C B 5,60 (.220) A MAX Jackscrew Push/Pull A B Layout Part Numbers Part Numbers max. 0,10 (.004) 9 MDSM-9SC-Z11-VS1 MDSM-9SC-Z24-VS1 19,90 (.783) 14,35 (.565) 15 MDSM-15SC-Z11-VS1 MDSM-15SC-Z24-VS1 23,70 (.993) 18,16 (.715) 25 MDSM-25SC-Z11-VS1 MDSM-25SC-Z24-VS1 30,05 (1.183) 24,51 (.965) C 0,10 (.004) 9,45 (.372) 13,17 (.519) 19,52 (.769) D max. 35,50 (1.40) 35,50 (1.40) 42,50 (1.67) 7,50 (.295) MAX Max. Cable Entry 5,70 (.224) 6,70 (.264) 7,90 (.311) Note: VS1 refers to packaging multiples of 100. Contacts are sold separately, see this page. Crimp Contacts Wire Trim Dimensions 0,95 (.037) 2,60 (.102) 15,00 (.591) 25,00 (.984) Part Numbers Socket 1,000 Piece Reel MDS-S-TS 10,000 Piece Reel MDS-S-RL For crimp tooling, see page 101. 100 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Commercial Micro D -- MDSM Contact Crimping Tools Parallel Action Low Volume Hand Tool Hand Tool Semi-Automatic Crimper/Stripper Part Number: CCTP-MDS Note: For use with individual contacts (break off reel MDS-S-TS or MDS-S-RL. Part Number: CCTR-MDS Note: For use with reeled contacts - Part Number MDS-S-TS. Part Number: ABT-620-MDS (Lease Only) Note: For use with reeled contacts - Part Number MDS-S-RL. For additional information, see page 275. Crimp dies for SSA Cable will be offered by ITT Cannon. Consult factory for details. Contact Insertion/Extraction Tools Jackpost Tool Insertion Tool Part Number: CIET-MDSM Note: For use with Z10 Jackpost. Part Number: 120090-0102 Note: Contacts cannot be removed from MDSM connectors. Shield Crimp Tooling Shield crimping requires four items; one press, one locator, and one each of the two dies listed below. Locator and Dies for Shield Termination Ordered Separately Hand Press Pneumatic Press Part Numbers Layout 9 15 25 Locator 317-8666-013 317-8666-014 317-8666-016 Die 274-8649-332/274-8649-333 274-8649-334/274-8649-335 274-8649-338/274-8649-339 Note: For assembly instructions and crimping information, refer to Manual #MY-1/190. Part Number: CHP-MDSM-SR Part Number: CPT-MDSM-SR Dimensions are shown in mm (inch) Dimensions subject to change 101 D Subminiature Commercial Micro D -- MDSM MDSM SSA Compatible Cable Assemblies interfaces. SSA permits the transfer of data at progressively higher speeds - 20 MB/sec interface currently available with 40 MB/sec becoming available in 1997/98. ITT Cannon's MDSM connector not only functions at these high speeds, but also brings to SSA smaller, less cumbersome and higher reliability cables and connectors than current options. ITT Cannon's 9 position MDSM connectors have been designed into the ANSI specification called SSA, ``Serial Storage Architecture,'' as the external I/O. SSA is a new serial interface for interconnecting storage devices, storage subsystems, servers and workstations. Storage subsystems are increasing in function, availability, density and performance. With this comes the trend for them to become more complex and ITT Cannon has the interconnect system which meets SSA's high performance requirements. ITT Cannon is offering SSA compatable external cable assemblies in six different lengths to meet your needs. These assemblies consist of two MDSM 9SC type cable connectors terminated to SSA specified external cable. SSA is an architecture which allows these new subsystems to be implemented more easily and at lower costs than other new high speed parallel X 5,71 (.225) P2 P1 19,89 (.783) 14,35 MAX (.565) 41,62 (1.639) MAX 56,01 (2.205) REF Note: Cables shown with Z50 thumbscrews. Part Number CA112104 CA112104-1 CA112104-2 CA112104-3 CA112104-4 CA112104-5 X Meter (Feet) 0,50 (1.600) 1,00 (2.200) 3,00 (9.800) 5,00 (16.400) 10,00 (32.800) 20,00 (65.600) Tolerance 25,00 (1.000) 25,00 (1.000) 25,00 (1.000) 64,00 (2.500) 64,00 (2.500) 64,00 (2.500) Note: For push/pull assemblies or other thumbscrews, please consult the factory. Crimp dies for SSA applications will be offered by ITT Cannon. Consult factory for details. 102 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Commercial Micro D -- MDSM Pinout SSA External Cable Wiring Table CONTACT #5 CONTACT #9 CONTACT #6 CONTACT #1 P1 P2 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 8,51 (.335) MAX Note: Shield connected to both shells. External Cable Pinouts P1 P2 Pin 2 6 4 9 Signal Name LineOut- LineOut+ LineIn- LineIn+ Pin 4 9 2 6 Signal Name LineIn- LineIn+ LineOut- LineOut+ Note: Pins 1, 3, 5, 7 and 8 are not connected. SSA External Cable Wire Cross Section (For Reference Only) CONDUCTOR INSULATION O 5,72 (.225) FILLER O 1,57 (.062) INNER SHIELD OUTER SHIELD JACKET Transfer Impedance Performance Requirements for External SSA Connections Frequency MHz 30 159 500 Value (dB-Ohm)(max.) -25 -16 -10 Dimensions are shown in mm (inch) Dimensions subject to change 103 D Subminiature Selection Index Filter D Page Filter D An Introduction to D*JK and D*JT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 D*JK Filter Performance and Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 D*JT Filter Performance and Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 D*JK Connectors Standard Footprint .318 or .283 inches 90 PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 90 PC Tails, Metal Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 European Footprint 10,2 or 9,4 mm 90 PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 90 PC Tails, Metal Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 90 PC Tails, Plastic Brackets & Grounding Straps . . . . . . . . . . . . . . . . . . . . . . . . . 116 90 PC Tails, Plastic Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Straight PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 D*JT Connectors Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Combo -- High Power 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Combo -- High Power Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Combo -- High Power Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 104 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK/D*JT F ilter connectors series D*JK and D*JT from ITT Cannon especially designed for commercial applications provide excellent protection against EMI and RFI. Using D Subminiature standard components a cost-effective production can be achieved as well as 100% compatibility with equivalent products according to DIN 41652. D Subminiature standard accessories can be used. High quality tubular ceramic capacitors are assembled onto the D*JK contacts and soldered to contact and backshell while series D*JT connectors apply planar array filters. Applications: EMI/RFI Sensitive Electronics Test & Measurement Equipment Computer Equipment Medical Equipment Telecommunication Transmission Product Features HF-tightness and mechanical stability by closed backshell Free-stamped grounding fingers (pin connector only) Straight and 90 solder pins (D*JK) Solder cups, straight and 90 solder pins (D*JT) Versatile mounting possibilities (brackets, captive nuts) Contact finsh according to performance class 2 (standard) or class 1 Specifications Temperature Range Per DIN IEC 68 Part 1 -55C to 125C Materials and Finishes Description Shell Insulator Contacts Material Steel Thermoplastic, UL 94V-0 Copper Alloy Finish Tin None Gold over Nickel Mechanical Data Coupling Polarization Termination Friction, accessories Keystone shape of shell PC tails, straight and 90 Solder cups Dimensions are shown in mm (inch) Dimensions subject to change 105 D Subminiature Filter D D*JK Filter Performance D*JK Electrical Data Voltage rating (working) Current rating Insulation resistance, electrification time 30 s, temperature 25C Dielectric Withstanding Voltage (Sea Level) 500 micro amps max. charge/discharge Filter Type C Filter Symbol per DIN 100 VDC 5A 5000 M min./100 V 250 VDC Capacitor Filter designation 5 4 Capacitance, type at 1 KHz, 0,1 Vrms, 25C 1500 pF 1000 pF Frequency Attenuation Attenuation MHz db min. db min. 10 3 -- 30 20 14 100 31 27 300 39 35 1000 47 42 2000 51 46 Attenuation per MIL-STD-220 at 25C with no applied voltage or current 106 3 2 1 680 pF Attenuation db min. -- 10 22 30 37 42 470 pF Attenuation db min. -- 7 18 27 32 36 330 pF Attenuation db min. -- 2 9 18 28 31 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JT Filter Performance D*JT Electrical Data Voltage rating (working) Current rating Insulation resistance, electrification time 30 s, temperature 25C Dielectric Withstanding Voltage (Sea Level) 500 micro amps max. charge/discharge Filter type C Filter symbol per DIN 200 VDC/120 Vrms, 400 Hz 5 A (Size 20 contacts), 30 A (Size 8 contacts) 10,000 M min./100 V 500 VDC Capacitor Filter designation 9 5 4 Capacitance, type at 1 KHz, 0,1 Vrms, 25C 47000 pF 5000 pF 2000 pF Frequency Attenuation Attenuation Attenuation MHz db min. db min. db min. 5 30 11 6 10 37 16 10 100 50 35 27 1000 45 54 48 2000 -- 64 60 5000 -- 64 64 Attenuation per MIL-STD-220 at 25C with no applied voltage or current 6 1 2 3 1500 pF Attenuation db min. 3 7 23 46 -- -- 1000 pF Attenuation db min. -- 5 20 42 60 64 500 pF Attenuation db min. -- 2 16 37 60 64 250 pF Attenuation db min. -- 1 14 35 60 64 Dimensions are shown in mm (inch) Dimensions subject to change 107 D Subminiature Filter D D*JK -- 90 PC Tails -- Standard Footprint .318 or .283 inch Plug Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Clinch Nut #4-40 UNC DEJKE9P*-1U0N DAJKE15P*-1U0N DBJKE25P*-1U0N DCJKE37P*-1U0N Through Hole DEJK9P*-1U0N DAJK15P*-1U0N DBJK25P*-1U0N DCJK37P*-1U0N * Insert filter designator. Example: DEJK9P4-1U0N (For 1000 pF Filter Capacitance) Note: For performance class 1 add -A190. Example: DEJK9P1-1U0N-A190 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (European), see page 227. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face 3,50 (.138) 2,84 (.112) 7,19 (.283) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,72 (.422) 10,72 (.422) W 0,37 (.015) 6,69 (.264) 6,69 (.264) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 108 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails -- Standard Footprint .318 or .283 inch Receptacle Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Clinch Nut #4-40 UNC DEJKE9S*-1U0N DAJKE15S*-1U0N DBJKE25S*-1U0N DCJKE37S*-1U0N Through Hole DEJK9S*-1U0N DAJK15S*-1U0N DBJK25S*-1U0N DCJK37S*-1U0N * Insert filter designator. Example: DEJK9S4-1U0N (for 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S1-1U0N-A190 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (European), see page 227. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face 3,50 (.138) 2,84 (.112) 7,19 (.283) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 109 D Subminiature Filter D D*JK -- 90 PC Tails -- European Footprint 10,2 or 9,4 mm Part Numbers Plug Shell Size DE DA DB DC Layout 9 15 25 37 Clinch Nut #4-40 UNC DEJKE9P*-1A0N DAJKE15P*-1A0N DBJKE25P*-1A0N DCJKE37P*-1A0N Through Hole DEJK9P*-1A0N DAJK15P*-1A0N DBJK25P*-1A0N DCJK37P*-1A0N Clinch Nut M3 DEJKX9P*-1A0N DAJKX15P*-1A0N DBJKX25P*-1A0N DCJKX37P*-1A0N * Insert filter designator. Example: DEJK9P4-1A0N (For 1000 pF Filter Capacitance) Modifier: For performance class 1 add -A190. Example: DEJK9P1-1A0N-A190 Filter Designator* 1 2 3 4 5 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware options (European), see page 227. Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C O 3,05 (.120) B 10 1 8 D E 9 15 O 0,60 (.024) 4,73 (.186) 2,54 (.100) 9,40 (.370) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,72 (.422) 10,72 (.422) W 0,37 (.015) 6,69 (.264) 6,69 (.264) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 110 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails -- European Footprint 10,2 or 9,4 mm Part Numbers Receptacle Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEJK9S*-1A0N DAJK15S*-1A0N DBJK25S*-1A0N DCJK37S*-1A0N Clinch Nut #4-40 UNC DEJKE9S*-1A0N DAJKE15S*-1A0N DBJKE25S*-1A0N DCJKE37S*-1A0N Clinch Nut M3 DEJKX9S*-1A0N DAJKX15S*-1A0N DBJKX25S*-1A0N DCJKX37S*-1A0N * Insert filter designator. Example: DEJK9S4-1A0N (for 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S1-1A0N-A190 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware options (European), see page 227. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face 4,73 (.186) 2,54 (.100) 9,40 (.370) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 111 D Subminiature Filter D D*JK -- 90 PC Tails and Metal Brackets -- Standard Footprint .318 or .283 inch Part Numbers Plug Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For pushfit/boardlock configuration, see page 225. Shell Size DE DA DB DC Bracket, #4-40 Nut, Boardlock DEJK9P*-1U7N-146 DAJK15P*-1U7N-146 DBJK25P*-1U7N-146 DCJK37P*-1U7N-146 Bracket, #4-40 Nut DEJK9P*-1U7N DAJK15P*-1U7N DBJK25P*-1U7N DCJK37P*-1U7N Layout 9 15 25 37 Insert filter designator *. Example: DEJK9P4-1U7N-146 (For 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9P4-1U7N-A190-146 Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face 3,50 (.138) BRACKET, METAL 2,84 (.112) BUSHING 7,19 (.283) W F L Boardlock removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 112 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails and Metal Brackets -- Standard Footprint .318 or .283 inch Part Numbers Receptacle Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For pushfit/boardlock configuration, see page 225. Shell Size DE DA DB DC Bracket, #4-40 Nut, Boardlock DEJK9S*-1U7N-146 DAJK15S*-1U7N-146 DBJK25S*-1U7N-146 DCJK37S*-1U7N-146 Bracket, #4-40 Nut DEJK9S*-1U7N DAJK15S*-1U7N DBJK25S*-1U7N DCJK37S*-1U7N Layout 9 15 25 37 Insert filter designator *. Example DEJK9S4-1U7N-146 (For 1000 pF Filter Capacitance) Note: For performance class 1, add -A190. Example: DEJK9S4-1U7N-A190-146 Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 8 E 1 15 D 9 2,89 (.114) 0,60 (.024) BOARDLOCK BRACKET, METAL 3,50 (.138) 2,84 (.112) BUSHING 7,19 (.283) F W L Boardlock removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 113 D Subminiature Filter D D*JK -- 90 PC Tails and Metal Brackets -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Bushing with Through Hole DEJK9P*-1AFN DAJK15P*-1AFN DBJK25P*-1AFN DCJK37P*-1AFN Captive Nut #4-40 UNC DEJK9P*-1A7N DAJK15P*-1A7N DBJK25P*-1A7N DCJK37P*-1A7N Captive Nut M3 DEJK9P*-1A9N DAJK15P*-1A9N DBJK25P*-1A9N DCJK37P*-1A9N Post #4-40 UNC DEJK9P*-1A8N DAJK15P*-1A8N DBJK25P*-1A8N DCJK37P*-1A8N Post M3 DEJK9P*-1AHN DAJK15P*-1AHN DBJK25P*-1AHN DCJK37P*-1AHN * Insert filter designator. Example: DEJK9P4-1A7N (For 1000 pF capacitance) Notes: For performance class 1 add -A190. Example: DEJK9P1-1AFN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1AFN-A190-146 Filter Designator* 1 2 3 4 5 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For pushfit/boardlock configuration, see page 225. Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 1 8 9 15 D E 2,89 (.114) 1,00 (.039) BOARDLOCK O 0,60 (.024) 3,70 (.146) BRACKET, METAL 2,54 (.100) BUSHING 9,40 (.370) W F L Boardlock removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 114 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails and Metal Brackets -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Bushing with Through Hole DEJK9S*-1AFN DAJK15S*-1AFN DBJK25S*-1AFN DCJK37S*-1AFN Captive Nut #4-40 UNC DEJK9S*-1A7N DAJK15S*-1A7N DBJK25S*-1A7N DCJK37S*-1A7N Captive Nut M3 DEJK9S*-1A9N DAJK15S*-1A9N DBJK25S*-1A9N DCJK37S*-1A9N Post #4-40 UNC DEJK9S*-1A8N DAJK15S*-1A8N DBJK25S*-1A8N DCJK37S*-1A8N Post M3 DEJK9S*-1AHN DAJK15S*-1AHN DBJK25S*-1AHN DCJK37S*-1AHN * Insert filter designator. Example: DEJK9S4-1A7N (For 1000 pF capacitance) Notes: For performance class 1 add -A190. Example: DEJK9S1-1AFN-A190 For pushfit/boardlocks add -146. Example: DEJK9S1-1AFN-A190-146 Filter Designator* 1 2 3 4 5 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For pushfit/boardlock configuration, see page 225. Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 8 E 1 15 D 9 2,89 (.114) 1,00 (.039) O 0,60 (.024) BOARDLOCK BRACKET, METAL BUSHING 3,70 (.146) 2,54 (.100) 9,40 (.370) W F L Boardlock removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 115 D Subminiature Filter D D*JK -- 90 PC Tails & Plastic Brackets with Grounding Straps -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Bushing with Through Hole DEJK9P*-1ADN DAJK15P*-1ADN DBJK25P*-1ADN DCJK37P*-1ADN Captive Nut #4-40 UNC DEJK9P*-1AWN DAJK15P*-1AWN DBJK25P*-1AWN DCJK37P*-1AWN Captive Nut M3 DEJK9P*-1AVN DAJK15P*-1AVN DBJK25P*-1AVN DCJK37P*-1AVN Post #4-40 UNC DEJK9P*-1AJN DAJK15P*-1AJN DBJK25P*-1AJN DCJK37P*-1AJN Post M3 DEJK9P*-1AGN DAJK15P*-1AGN DBJK25P*-1AGN DCJK37P*-1AGN * Insert filter designator. Example: DEJK9P4-1AWN (For 1000 pF capacitance) Notes: For performance class 1 add -A190. Example: DEJK9P1-1ADN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 1 8 9 15 D E 1,00 (.039) O 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING STRAP 3,70 (.146) 2,54 (.100) 9,40 (.370) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 116 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails & Plastic Brackets with Grounding Straps -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Bushing with Through Hole DEJK9S*-1ADN DAJK15S*-1ADN DBJK25S*-1ADN DCJK37S*-1ADN Captive Nut #4-40 UNC DEJK9S*-1AWN DAJK15S*-1AWN DBJK25S*-1AWN DCJK37S*-1AWN Captive Nut M3 DEJK9S*-1AVN DAJK15S*-1AVN DBJK25S*-1AVN DCJK37S*-1AVN Post #4-40 UNC DEJK9S*-1AJN DAJK15S*-1AJN DBJK25S*-1AJN DCJK37S*-1AJN Post M3 DEJK9S*-1AGN DAJK15S*-1AGN DBJK25S*-1AGN DCJK37S*-1AGN * Insert filter designator. Example: DEJK9S4-1AWN (For 1000 pF capacitance) Notes: For performance class 1 add -A190. Example: DEJKS1-1ADN-A190 For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Desginator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 8 E 15 1 D 9 1,00 (.039) O 0,60 (.024) BRACKET, PLASTIC, WITH GROUNDING STRAP 3,70 (.146) 2,54 (.100) 9,40 (.370) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 117 D Subminiature Filter D D*JK -- 90 PC Tails & Plastic Brackets -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Bushing with Through Hole DEJK9P*-1A5N DAJK15P*-1A5N DBJK25P*-1A5N DCJK37P*-1A5N Captive Nut #4-40 UNC DEJK9P*-1AUN DAJK15P*-1AUN DBJK25P*-1AUN DCJK37P*-1AUN Captive Nut M3 DEJK9P*-1ATN DAJK15P*-1ATN DBJK25P*-1ATN DCJK37P*-1ATN Post #4-40 UNC DEJK9P*-1A6N DAJK15P*-1A6N DBJK25P*-1A6N DCJK37P*-1A6N Post M3 DEJK9P*-1APN DAJK15P*-1APN DBJK25P*-1APN DCJK37P*-1APN * Insert filter designator. Example: DEJK9P4-1A5N (For 1000 pF filter capacitance) Notes: For performance class 1 add -A190. Example: DEJK9P1-1A5N-A190 For pushfit/boardlocks add-146. Example: DEJK9P1-1A5N-A190-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 1 8 9 15 D E 1,00 (.039) O 0,60 (.024) BRACKET, PLASTIC 3,70 (.146) 2,54 (.100) 9,40 (.370) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0.13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,37 (.015) 6,69 (.264) 6,69 (.264) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 118 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- 90 PC Tails and Plastic Brackets -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Bushing with Through Hole DEJK9S*-1A5N DAJK15S*-1A5N DBJK25S*-1A5N DCJK37S*-1A5N Captive Nut #4-40 UNC DEJK9S*-1AUN DAJK15S*-1AUN DBJK25S*-1AUN DCJK37S*-1AUN Captive Nut M3 DEJK9S*-1ATN DAJK15S*-1ATN DBJK25S*-1ATN DCJK37S*-1ATN Post #4-40 UNC DEJK9S*-1A6N DAJK15S*-1A6N DBJK25S*-1A6N DCJK37S*-1A6N Post M3 DEJK9S*-1APN DAJK15S*-1APN DBJK25S*-1APN DCJK37S*-1APN * Insert filter designator. Example: DEJK9S4-1A5N (for 1000 pF filter capacitance) Notes: For performance class 1 add -A190. Example: DEJK9S1-1A5N-A190 For pushfit/boardlocks add -146. Example: DEJK9S1-1A5N-A190-146 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A C B 10 8 E 15 1 D 9 1,00 (.039) O 0,60 (.024) BRACKET, PLASTIC 3,70 (.146) 2,54 (.100) 9,40 (.370) W L F Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 119 D Subminiature Filter D D*JK -- Straight P.C. Tails Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DEJK9P*-OL4 DAJK15P*-OL4 DBJK25P*-OL4 DCJK37P*-OL4 DDJK50P*-OL4 Clinch Nut #4-40 UNC DEJKE9P*-OL4 DAJKE15P*-OL4 DBJKE25P*-OL4 DCJKE37P*-OL4 DDJKE50P*-OL4 Clinch Nut M3 DEJKX9P*-OL4 DAJKX15P*-OL4 DBJKX25P*-OL4 DCJKX37P*-OL4 DDJKX50P*-OL4 Pushfit/Boardlock #4-40 UNC DEJKE9P*-OL4-146 DAJKE15P*-OL4-146 DBJKE25P*-OL4-146 DCJKE37P*-OL4-146 DDJKE50P*-OL4-146 Pushfit/Boardlock M3 DEJKX9P*-OL4-146 DAJKX15P*-OL4-146 DBJKX25P*-OL4-146 DCJKX37P*-OL4-146 DDJKX50P*-OL4-146 * Insert filter designator. Example: DEJK9P4-0L4 (for 1000 pF filter capacitance) Note: For performance class 1 add -A190. Example: DEJK9P1-0L4-A190 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For Hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Designator* 1 2 3 4 5 Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face DD Configuration A 5,68 (.224) O 3,05 (.120) C 2,84 (.112) B 10 1 8 E D 9 15 L 2,84 (.112) O 0,60 (.024) 11,70 0,20 (.461 .008) W F Dimensions Shell Size DE DA DB DC DD 120 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.439) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.607) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JK -- Straight P.C. Tails Receptacle Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEJK9S*-OL4 DAJK15S*-OL4 DBJK25S*-OL4 DCJK37S*-OL4 Clinch Nut #4-40 UNC DEJKE9S*-OL4 DAJKE15S*-OL4 DBJKE25S*-OL4 DCJKE37S*-OL4 Clinch Nut M3 DEJKX9S*-OL4 DAJKX15S*-OL4 DBJKX25S*-OL4 DCJKX37S*-OL4 Pushfit/Boardlock #4-40 UNC DEJKE9S*-OL4-146 DAJKE15S*-OL4-146 DBJKE25S*-OL4-146 DCJKE37S*-OL4-146 Pushfit/Boardlock M3 DEJKX9S*-OL4-146 DAJKX15S*-OL4-146 DBJKX25S*-OL4-146 DCJKX37S*-OL4-146 * Insert filter designator. Example: DEJK9S4-OL4 (for 1000 pF filter capacitance) Note: For performance class 1 add -A190. Example: DEJK9S1-OL4-A190 Filter Designator* 1 2 3 4 5 Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For Hardware views (European), see page 227. For pushfit/boardlock configuration, see page 225. Filter Capacitance 330 pF 470 pF 680 pF 1000 pF 1500 pF For electrical data, see page 106. Engaging Face A O 3,05 (.120) C B 10 8 E 1 15 D 9 2,84 (.112) O 0,60 (.024) 11,70 0,20 (.461 .008) W F L Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 121 D Subminiature Filter D D*JT -- Solder Cup Plug Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEJT9P* DAJT15P* DBJT25P* DCJT37P* Clinch Nut #4-40 UNC DEJTE9P* DAJTE15P* DBJTE25P* DCJTE37P* Clinch Nut M3 DEJTX9P* DAJTX15P* DBJTX25P* DCJTX37P* * Insert filter designator. Example: DCJT37P4 (for 2000 pF filter capacitance) Note: For performance class 1 add -A190. Example: DCJT37P1-A190 Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Filter Designator* 1 2 3 4 5 Filter Capacitance 1000 pF 500 pF 250 pF 2000 pF 5000 pF For electrical data, see page 107. Engaging Face 2,84 (.112) 9,80 (.386) MAX W L F Dimensions Shell Size DE DA DB DC 122 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0.13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,37 (.015) 6,69 (.264) 6,69 (.264) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JT -- Solder Cup Receptacle Part Numbers Shell Size DE DA DB DC Layout 9 15 25 37 Through Hole DEJT9S* DAJT15S* DBJT25S* DCJT37S* Clinch Nut #4-40 UNC DEJTE9S* DAJTE15S* DBJTE25S* DCJTE37S* Clinch Nut M3 DEJTX9S* DAJTX15S* DBJTX25S* DCJTX37S* * Insert filter designator. Example: DEJT9S4 (for 2000 pF filter capacitance) Note: For performance class 1 add -A190. Example: DEJT9S1-A190 Filter Designator* 1 2 3 4 5 Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (European), see page 227. Filter Capacitance 1000 pF 500 pF 250 pF 2000 pF 5000 pF For electrical data, see page 107. Engaging Face A C O 3,05 (.120) B POSITION 1 D E 10 2,84 (.112) 9,80 (.386) MAX L W F Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 123 D Subminiature Filter D D*JT Combo -- High Power 90 Plug Part Numbers Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 250. For panel cutouts, see page 221. For hardware views (European), see page 227. Clinch Nut #4-40 UNC DAJTE3W3P1-1A0N DAJTE3W3P6-1A0N DAJTE3W3P5-1A0N DAJTE3W3P9-1A0N Through Hole DAJT3W3P1-1A0N DAJT3W3P6-1A0N DAJT3W3P5-1A0N DAJT3W3P9-1A0N Clinch Nut M3 DAJTX3W3P1-1A0N DAJTX3W3P6-1A0N DAJTX3W3P5-1A0N DAJTX3W3P9-1A0N Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190 Part Numbers -- Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Clinch Nut #4-40 UNC DAJTE3WK3P1-1A0N DAJTE3WK3P6-1A0N DAJTE3WK3P5-1A0N DAJTE3WK3P9-1A0N Through Hole DAJT3WK3P1-1A0N DAJT3WK3P6-1A0N DAJT3WK3P5-1A0N DAJT3WK3P9-1A0N Clinch Nut M3 DAJTX3W3KP1-1A0N DAJTX3WK3P6-1A0N DAJTX3WK3P5-1A0N DAJTX3WK3P9-1A0N Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A O 3,05 (.120) C 10 A1 B 10 A1 A3 E O 3,05 (.120) C B A3 E D D O 2,60 (.102) O 2,60 (.102) 12,30 (.484) W L F Dimensions Shell Size DA 124 A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 25,25 (.994) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 8,36 (.329) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,72 (.422) W 0,368 (.0145) 6,693 (.2635) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JT Combo -- High Power 90 Part Numbers Receptacle Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 252. For panel cutouts, see page 221. For hardware views (European), see page 227. Clinch Nut #4-40 UNC DAJTE3W3S1-1A0N DAJTE3W3S6-1A0N DAJTE3W3S5-1AON DAJTE3W3S9-1A0N Through Hole DAJT3W3S1-1A0N DAJT3W3S6-1A0N DAJT3W3S5-1AON DAJT3W3S9-1A0N Clinch Nut M3 DAJTX3W3S1-1A0N DAJTX3W3S6-1A0N DAJTX3W3S5-1AON DAJTX3W3S9-1A0N Note: For performance class 1 add -A190. Example: DAJT3W3S9-1AON-A190 Part Numbers -- Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000pF Clinch Nut #4-40 UNC DAJTE3WK3S1-1A0N DAJTE3WK3S6-1A0N DAJTE3WK3S5-1AON DAJTE3WK3S9-1A0N Through Hole DAJT3WK3S1-1A0N DAJT3WK3S6-1A0N DAJT3WK3S5-1AON DAJT3WK3S9-1A0N Clinch Nut M3 DAJTX3WK3S1-1A0N DAJTX3WK3S6-1A0N DAJTX3WK3S5-1AON DAJTX3WK3S9-1A0N Note: For performance class 1 add -A190. Example: DAJT3WK3S9-1AON-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A C C B 10 A3 O 3,05 (.120) B 10 A3 A1 D E O 3,05 (.120) A1 D E 2,60 (.102) 2,60 (.102) 12,30 (.484) L W F Dimensions Shell Size DA A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 24,66 (.971) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 7,90 (.311) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 125 D Subminiature Filter D D*JT Combo -- High Power Straight Part Numbers Plug Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Clinch Nut #4-40 UNC DAJTE3W3P1-OL4 DAJTE3W3P6-OL4 DAJTE3W3P5-OL4 DAJTE3W3P9-OL4 Through Hole DAJT3W3P1-OL4 DAJT3W3P6-OL4 DAJT3W3P5-OL4 DAJT3W3P9-OL4 Clinch Nut M3 DAJTX3W3P1-OL4 DAJTX3W3P6-OL4 DAJTX3W3P5-OL4 DAJTX3W3P9-OL4 Note: For performance class 1 add -A190. Example: DAJT3W3P6-OL4-A190 Part Numbers -- Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 254. For panel cutouts, see page 221. For hardware views (European), see page 227. Clinch Nut #4-40 UNC DAJTE3WK3P1-OL4 DAJTE3WK3P6-OL4 DAJTE3WK3P5-OL4 DAJTE3WK3P9-OL4 Through Hole DAJT3WK3P1-OL4 DAJT3WK3P6-OL4 DAJT3WK3P5-OL4 DAJT3WK3P9-OL4 Clinch Nut M3 DAJTX3WK3P1-OL4 DAJTX3WK3P6-OL4 DAJTX3WK3P5-OL4 DAJTX3WK3P9-OL4 Note: For performance class 1 add -A190. Example: DAJT3WK3P6-OL4-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A O 3,05 (.120) C A1 B 10 A3 E O 3,05 (.120) C B 10 A1 D A3 E D O 2,60 (.102) 11,60 0,20 (.457 .008) W L F Dimensions Shell Size DA 126 A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 25,25 (.994) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 8,36 (.329) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,72 (.422) W 0,368 (.0145) 6,693 (.2635) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JT Combo -- High Power Straight Receptacle Part Numbers Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 257. For panel cutouts, see page 221. For hardware views (European), see page 227. Clinch Nut #4-40 UNC DAJTE3W3S1-OL4 DAJTE3W3S6-OL4 DAJTE3W3S5-OL4 DAJTE3W3S9-OL4 Through Hole DAJT3W3S1-OL4 DAJT3W3S6-OL4 DAJT3W3S5-OL4 DAJT3W3S9-OL4 Clinch Nut M3 DAJTX3W3S1-OL4 DAJTX3W3S6-OL4 DAJTX3W3S5-OL4 DAJTX3W3S9-OL4 Note: For performance class 1 add -A190. Example: DAJT3W3S6-OL4-A190 Part Numbers -- Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Clinch Nut #4-40 UNC DAJTE3WK3S1-OL4 DAJTE3WK3S6-OL4 DAJTE3WK3S5-OL4 DAJTE3WK3S9-OL4 Through Hole DAJT3WK3S1-OL4 DAJT3WK3S6-OL4 DAJT3WK3S5-OL4 DAJT3WK3S9-OL4 Clinch Nut M3 DAJTX3WK3S1-OL4 DAJTX3WK3S6-OL4 DAJTX3WK3S5-OL4 DAJTX3WK3S9-OL4 Note: For performance class 1 add -A190. Example: DAJT3WK3S-OL4-A190 For electrical data, see page 107. Engaging Face Keyed Configuration Engaging Face A A C C B 10 A3 O 3,05 (.120) A1 E B 10 A3 D O 3,05 (.120) A1 D E O 2,60 (.102) 11,70 0,20 (.461 .008) F L W Dimensions Shell Size DA A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 24,66 (.971) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 7,90 (.311) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 127 D Subminiature Filter D D*JT Combo -- High Power Solder Cup Plug Part Numbers Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Through Hole DAJT3W3P1 DAJT3W3P6 DAJT3W3P5 DAJT3W3P9 Clinch Nut #4-40 UNC DAJTE3W3P1 DAJTE3W3P6 DAJTE3W3P5 DAJTE3W3P9 Clinch Nut M3 DAJTX3W3P1 DAJTX3W3P6 DAJTX3W3P5 DAJTX3W3P9 Clinch Nut #4-40 UNC DAJTE3WK3P1 DAJTE3WK3P6 DAJTE3WK3P5 DAJTE3WK3P9 Clinch Nut M3 DAJTX3WK3P1 DAJTX3WK3P6 DAJTX3WK3P5 DAJTX3WK3P9 Note: For performance class 1 add -A190. Example: DAJT3W3P6-A190 Part Numbers - Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 222. For panel cutouts, see page 221. For hardware views (European), see page 227. Through Hole DAJT3WK3P1 DAJT3WK3P6 DAJT3WK3P5 DAJT3WK3P9 Note: For performance class 1 add -A190. Example: DAJT3WK3P6-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A C B 10 A1 C O 3,05 (.120) A3 E O 3,05 (.120) B 10 A1 A3 E D D O 3,63 (.143) 15,80 0,50 (.622 .011) W L F Dimensions Shell Size DA 128 A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 25,25 (.994) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 8,36 (.329) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,72 (.422) W 0,368 (.0145) 6,693 (.2635) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Filter D D*JT Combo -- High Power Solder Cup Part Numbers Receptacle Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Through Hole DAJT3W3S1 DAJT3W3S6 DAJT3W3S5 DAJT3W3S9 Clinch Nut #4-40 UNC DAJTE3W3S1 DAJTE3W3S6 DAJTE3W3S5 DAJTE3W3S9 Clinch Nut M3 DAJTX3W3S1 DAJTX3W3S6 DAJTX3W3S5 DAJTX3W3S9 Clinch Nut #4-40 UNC DAJTE3WK3S1 DAJTE3WK3S6 DAJTE3WK3S5 DAJTE3WK3S9 Clinch Nut M3 DAJTX3WK3S1 DAJTX3WK3S6 DAJTX3WK3S5 DAJTX3WK3S9 Note: For performance class 1 add -A190. Example: DAJT3W3S6-A190 Part Numbers -- Keyed Configuration Filter Capacitance 1000 pF 1500 pF 5000 pF 47000 pF Reader's Resource For contact cavity arrangements, see page 223. For panel cutouts, see page 221. For hardware views (European), see page 227. Through Hole DAJT3WK3S1 DAJT3WK3S6 DAJT3WK3S5 DAJT3WK3S9 Note: For performance class 1 add -A190. Example: DAJT3WK3S6-A190 For electrical data, see page 107. Keyed Configuration Engaging Face Engaging Face A A C C B 10 B 10 O 3,05 (.120) O 3,05 (.120) A3 A3 A1 A1 D E D E O 3,63 (.143) 15,90 0,50 (.626 .011) F L W Dimensions Shell Size DA A 0,38 (.015) 39,14 (1.541) B 0,13 (.005) 24,66 (.971) C 0,13 (.005) 33,32 (1.312) D 0,13 (.005) 7,90 (.311) E 0,38 (.015) 12,55 (.494) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 129 D Subminiature Selection Index Military/High Reliability Page Military/High Reliability An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Standard Layout 90 PC Tail with Plastic Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 90 PC Tail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Straight PC Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Wrap Post Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Solder Cup Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 MIL-C-24308 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 MIL-C-39028 Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HE501/D*M Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 MIL-24308 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Combo D PCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option) Coaxial 90 (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 Coaxial 90 (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Coaxial Straight (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Coaxial Straight (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Combo D PCB Connectors with High Power Contacts 40 A High Power 90 (Sizes DE-DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 40 A High Power 90 (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 40 A High Power Straight (Sizes DE-DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 40 A High Power Straight (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Combo D PCB Connectors with High Voltage Contacts High Voltage Straight (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 High Voltage Straight (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Combo D PCB Connectors with (Size 20) Signal Contacts Only Cable Solder Cup (Sizes DE-DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 130 Dimensions are shown in mm (inch) Dimensions subject to change D S ubm i n i atur e M i l i tar y/H i gh R el i abi l i ty I TT Cannon Military/High Reliability D Subminiature connectors are used in many applications, including aerospace, transportation, communication systems, information systems and test equipment. Being the inventor of the D Subminiature connector, ITT Cannon is able to use its extensive design expertise and high quality manufacturing processes to insure the optimum performance and reliability. The D Subminiature connectors with fixed contacts in solder cup, straight and 90 PC contact terminations are qualified to MIL-C-24308 (see cross reference, pages 142-143). These highreliability D Subminiature connectors are the finest quality connectors available at the most competitive prices in the market. Applications: Aerospace Transportation Communication Systems Information Systems Test Equipment Product Features Suitable for a variety of cable and printed circuit board options Solder cup version accommodates wire size 20 AWG maximum 5 A standard current rating Clinch Nut and Float Mount Options Specifications Temperature Rating - 55C to 125C Signal Contact Current Rating 7.5 A current capacity Signal Contact Resistance Coaxial VSWR Coaxial Insertion Loss 55 millivolt max. at 7.5 test current Signal Contact Dielectric Withstanding Voltage 1250 VAC at Sea Level Coaxial Current Rating 5 A Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level Coaxial Impedance High Power Current Rating High Power Dielectric Withstanding Voltage High Voltage Current Rating High Voltage Contact Dielectric Withstanding Voltage 75 or 50 Less than 1.30+ .03F for F up to 500 MHz .3dB loss at 500 MHz Up to 40 A 1000 VAC at Sea Level 5A 2800 V at Sea Level Materials and Finishes Des cription S hell Material S teel Ins ulator Contacts (Military) Contacts (Commercial) Dual Float Mount Hardware Clinch Nut Hardware S tandoff Plastic Bracket Metal Bracket Polyes ter, UL 94V-0, Color: Green Copper Alloy Copper Alloy Stainless Steel Stainless Steel with plastic insert S teel Thermoplastic, UL 94V-0 S teel Finis h/Treatment Yellow Chromate over Zinc (Cadmium available upon request; order code -A101) None 50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance Gold over Nickel on mating area, Tin on balance Passivated Passivated Trivalent Chromate over Zinc None Zinc ( Tin if boardlocks are attached) Coaxial/High Power/High Voltage Contact Assemblies Contacts and Outer Shells Ring, Retaining Ins ulator ( Coaxial Only) Insulator (High Voltage Only) Copper Alloy Copper Alloy Teflon Thermoplastic Gold over Nickel Nickel None None Dimensions are shown in mm (inch) Dimensions subject to change131 D Subminiature Military/High Reliability 90 PC Tail with Plastic Bracket Plug Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. Layout 9 15 25 37 50 X 3,23 (.127) DEMM9PD DAMM15PD DBMM25PD DCMM37PD DDMM50PD XY 0,76 (.030) X 4,01 (.158) DEMM9PL DAMM15PL DBMM25PL DCMM37PL DDMM50PL X 3,23 (.127) DEM9PD DAM15PD DBM25PD DCM37PD DDM50PD XY 0,76 (.030) X 4,01 (.158) DEM9PL DAM15PL DBM25PL DCM37PL DDM50PL X 4,65 (.183) DEMM9PS DAMM15PS DBMM25PS DCMM37PS DDMM50PS X 3,23 (.127) DEMM9PA DAMM15PA DBMM25PA DCMM37PA DDMM50PA XY 1,02 (.040) X 4,01 (.158) DEMM9PG DAMM15PG DBMM25PG DCMM37PG DDMM50PG X 4,65 (.183) DEMM9PW DAMM15PW DBMM25PW DCMM37PW DDMM50PW XY 1,02 (.040) X 4,01 (.158) DEM9PG DAM15PG DBM25PG DCM37PG DDM50PG X 4,65 (.183) DEM9PW DAM15PW DBM25PW DCM37PW DDM50PW Commercial Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 4,65 (.183) DEM9PS DAM15PS DBM25PS DCM37PS DDM50PS X 3,23 (.127) DEM9PA DAM15PA DBM25PA DCM37PA DDM50PA DD Configuration Engaging Face 2,84 (.112) A X 0,69 (.027) 5,68 (.224) C B E D 7,18 0,25 (.283 .010) 10 OY O 3,05 (.120) M L 2,84 (.112) X 0,69 (.027) N 7,18 0,25 (.283 .010) F W Dimensions Shell Size DE DA DB DC DD 132 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W 0,25 (.010) 0,368 (.0145) 0,41 (.016) 10,72 (.422) 6,693 (.2635) -- 10,72 (.422) 6,693 (.2635) -- 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) M 0,25 (.010) 12,30 (.484) 12,30 (.484) 12,30 (.484) 12,30 (.484) 15,09 (.594) N 0,13 (.005) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,04 (.395) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 90 PC Tail with Plastic Bracket Receptacle Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. Layout 9 15 25 37 50 X 3,23 (.127) DEMM9SD DAMM15SD DBMM25SD DCMM37SD DDMM50SD XY 0,76 (.030) X 4,01 (.158) DEMM9SL DAMM15SL DBMM25SL DCMM37SL DDMM50SL X 3,23 (.127) DEM9SD DAM15SD DBM25SD DCM37SD DDM50SD XY 0,76 (.030) X 4,01 (.158) DEM9SL DAM15SL DBM25SL DCM37SL DDM50SL X 4,65 (.183) DEMM9SS DAMM15SS DBMM25SS DCMM37SS DDMM50SS X 3,23 (.127) DEMM9SA DAMM15SA DBMM25SA DCMM37SA DDMM50SA XY 1,02 (.040) X 4,01 (.158) DEMM9SG DAMM15SG DBMM25SG DCMM37SG DDMM50SG X 4,65 (.183) DEMM9SW DAMM15SW DBMM25SW DCMM37SW DDMM50SW XY 1,02 (.040) X 4,01 (.158) DEM9SG DAM15SG DBM25SG DCM37SG DDM50SG X 4,65 (.183) DEM9SW DAM15SW DBM25SW DCM37SW DDM50SW Commercial Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 4,65 (.183) DEM9SS DAM15SS DBM25SS DCM37SS DDM50SS X 3,23 (.127) DEM9SA DAM15SA DBM25SA DCM37SA DDM50SA DD Configuration Engaging Face A 2,84 (.112) 5,68 (.224) C B X 0,69 (.027) D E 7,18 0,25 (.283 .010) 10 OY 2,84 (.112) X 0,69 (.027) 7,18 0,25 (.283 .010) W O 3,05 (.120) M L N F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) M 0,25 (.010) 12,30 (.484) 12,30 (.484) 12,30 (.484) 12,30 (.484) 15,09 (.594) N 0,13 (.005) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,04 (.395) Dimensions are shown in mm (inch) Dimensions subject to change 133 D Subminiature Military/High Reliability 90 PC Tail Plug Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 X 3,23 (.127) DEMM9PF DAMM15PF DBMM25PF DCMM37PF DDMM50PF XY 0,76 (.030) X 4,01 (.158) DEMM9PP DAMM15PP DBMM25PP DCMM37PP DDMM50PP X 3,23 (.127) DEM9PF DAM15PF DBM25PF DCM37PF DDM50PF XY 0,76 (.030) X 4,01 (.158) DEM9PP DAM15PP DBM25PP DCM37PP DDM50PP XY 1,02 (.040) X 4,65 (.183) DEMM9PR DAMM15PR DBMM25PR DCMM37PR DDMM50PR X 3,23 (.127) DEMM9PC DAMM15PC DBMM25PC DCMM37PC DDMM50PC X 4,01 (.158) DEMM9PK DAMM15PK DBMM25PK DCMM37PK DDMM50PK Commercial Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Engaging Face XY 1,02 (.040) X 4,65 (.183) DEM9PR DAM15PR DBM25PR DCM37PR DDM50PR X 3,23 (.127) DEM9PC DAM15PC DBM25PC DCM37PC DCM50PC X 4,01 (.158) DEM9PK DAM15PK DBM25PK DCM37PK DDM50PK DD Configuration 2,84 (.112) A X 0,69 (.027) 5,68 (.224) C B O 3,05 (.120) D E K 7,18 0,25 (.283 .010) 10 L OY 2,84 (.112) 7,18 0,25 (.283 .010) X 0,69 (.027) W F Dimensions Shell Size DE DA DB DC DD 134 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 90 PC Tail Receptacle Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 3,23 (.127) DEMM9SF DAMM15SF DBMM25SF DCMM37SF DDMM50SF XY 0,76 (.030) X 4,01 (.158) DEMM9SP DAMM15SP DBMM25SP DCMM37SP DDMM50SP X 3,23 (.127) DEM9SF DAM15SF DBM25SF DCM37SF DDM50SF XY 0,76 (.030) X 4,01 (.158) DEM9SP DAM15SP DBM25SP DCM37SP DDM50SP XY 1,02 (.040) X 4,65 (.183) DEMM9SR DAMM15SR DBMM25SR DCMM37SR DDMM50SR X 3,23 (.127) DEMM9SC DAMM15SC DBMM25SC DCMM37SC DDMM50SC X 4,01 (.158) DEMM9SK DAMM15SK DBMM25SK DCMM37SK DDMM50SK Commercial Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. For hardware view (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 XY 1,02 (.040) X 4,65 (.183) DEM9SR DAM15SR DBM25SR DCM37SR DDM50SR X 3,23 (.127) DEM9SC DAM15SC DBM25SC DCM37SC DDM50SC X 4,01 (.158) DEM9SK DAM15SK DBM25SK DCM37SK DDM50SK DD Configuration Engaging Face A 2,84 (.112) 5,68 (.224) C O 3,05 (.120) B X 0,69 (.027) K D E 7,18 0,25 (.283 .010) 10 L OY 2,84 (.112) X 0,69 (.027) 7,18 0,25 (.283 .010) W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0.13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 135 D Subminiature Military/High Reliability Straight PC Tail Plug Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 3,23 (.127) DEMM9PE* DAMM15PE* DBMM25PE* DCMM37PE* DDMM50PE* XY 0,76 (.030) X 4,01 (.158) DEMM9PM* DAMM15PM* DBMM25PM* DCMM37PM* DDMM50PM* X 4,65 (.183) DEMM9PZ* DAMM15PZ* DBMM25PZ* DCMM37PZ* DDMM50PZ* X 3,23 (.127) DEMM9PB DAMM15PB DBMM25PB DCMM37PB DDMM50PB XY 1,02 (.040) X 4,01 (.158) DEMM9PH DAMM15PH DBMM25PH DCMM37PH DDMM50PH X 4,65 (.183) DEMM9PX* DAMM15PX* DBMM25PX* DCMM37PX* DDMM50PX* XY 1,02 (.040) X 4,01 (.158) DEM9PH DAM15PH DBM25PH DCM37PH DDM50PH X 4,65 (.183) DEM9PX DAM15PX DBM25PX DCM37PX DDM50PX Note: Spacers (shipped loose) provided only on parts marked * Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Commercial Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 3,23 (.127) DEM9PE DAM15PE DBM25PE DCM37PE DDM50PE XY 0,76 (.030) X 4,01 (.158) DEM9PM DAM15PM DBM25PM DCM37PM DDM50PM X 4,65 (.183) DEM9PZ DAM15PZ DBM25PZ DCM37PZ DDM50PZ X 3,23 (.127) DEM9PB DAM15PB DBM25PB DCM37PB DDM50PB Engaging Face DD Configuration A 5,69 (.224) C B O 3,05 (.120) 2,84 (.112) K E D L 10 SPACER (SHIPPED LOOSE) FOR REFERENCE ONLY OY X 0,69 (.027) 6,86 (.270) Dimensions Shell Size DE DA DB DC DD 136 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (0.39) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Straight PC Tail Receptacle Part Numbers Military Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 X 3,23 (.127) DEMM9SE* DAMM15SE* DBMM25SE* DCMM37SE* DDMM50SE* XY 0,76 (.030) X 4,01 (.158) DEMM9SM* DAMM15SM* DBMM25SM* DCMM37SM* DDMM50SM* X 4,65 (.183) DEMM9SZ* DAMM15SZ* DBMM25SZ* DCMM37SZ* DDMM50SZ* X 3,23 (.127) DEMM9SB DAMM15SB DBMM25SB DCMM37SB DDMM50SB XY 1,02 (.040) X 4,01 (.158) DEMM9SH DAMM15SH DBMM25SH DCMM37SH DDMM50SH X 4,65 (.183) DEMM9SX* DAMM15SX* DBMM25SX* DCMM37SX* DDMM50SX* XY 1,02 (.040) X 4,01 (.158) DEM9SH DAM15SH DBM25SH DCM37SH DDM50SH X 4,65 (.183) DEM9SX DAM15SX DBM25SX DCM37SX DDM50SX Note: Spacers (shipped loose) provided only on parts marked * Commercial Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 X 3,23 (.127) DEM9SE DAM15SE DBM25SE DCM37SE DDM50SE XY 0,76 (.030) X 4,01 (.158) DEM9SM DAM15SM DBM25SM DCM37SM DDM50SM X 4,65 (.183) DEM9SZ DAM15SZ DBM25SZ DCM37SZ DDM50SZ X 3,23 (.127) DEM9SB DAM15SB DBM25SB DCM37SB DDM50SB DD Configuration 5,69 (.224) Engaging Face 2,84 (.112) A C O 3,05 (.120) B K D E L 10 SPACER (SHIPPED LOOSE) FOR REFERENCE ONLY 2,84 (.112) OY X 0,69 (.027) 6,86 (.270) W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 137 D Subminiature Military/High Reliability Wrap Post Connector Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Military Part Numbers DEMM9PF179 DEMM9PF179A DAMM15PF179 DAMM15PF179A DBMM25PF179 DBMM25PF179A DCMM37PF179 DCMM37PF179A DDMM50PF179 DDMM50PF179A Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Commercial Part Numbers DEM9PF179 DEM9PF179A DAM15PF179 DAM15PF179A DBM25PF179 DBM25PF179A DCM37PF179 DCM37PF179A DDM50PF179 DDM50PF179A Modification Code F179 F179A Number of Wraps 2 3 X 0,51 (.020) 9,60 (.378) 12,90 (.508) DD Configuration 5,69 (.224) Engaging Face 2,84 (.112) A C O 3,05 (.120) B K E D L 10 2,84 (.112) 0,61 (.024) X 5,99 0,38 (.236 .015) W F Dimensions Shell Size DE DA DB DC DD 138 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Wrap Post Connector Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 274. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Military Part Numbers DEMM9SF179 DEMM9SF179A DAMM15SF179 DAMM15SF179A DBMM25SF179 DBMM25SF179A DCMM37SF179 DCMM37SF179A DDMM50SF179 DDMM50SF179A Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Commercial Part Numbers DEM9SF179 DEM9SF179A DAM15SF179 DAM15SF179A DBM25SF179 DBM25SF179A DCM37SF179 DCM37SF179A DDM50SF179 DDM50SF179A Modification Code F179 F179A Number of Wraps 2 3 X 0,51 (.020) 9,60 (.378) 12,90 (.508) DD Configuration 5,69 (.224) 2,84 (.112) Engaging Face A C B O 3,05 (.120) K D E L 10 2,84 (.112) 0,61 (.024) X F 5,99 0,38 (.236 .015) W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 139 D Subminiature Military/High Reliability Solder Cup Connector Plug Part Numbers Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 Engaging Face Through Hole DEMM9P DAMM15P DBMM25P DCMM37P DDMM50P Military Part Numbers Dual Float Mount DEMMY9P DAMMY15P DBMMY25P DCMMY37P DDMMY50P Clinch Nut #4-40 UNC DEMME9P DAMME15P DBMME25P DCMME37P DDMME50P Through Hole DEM9P DAM15P DBM25P DCM37P DDM50P Commercial Part Numbers Dual Float Mount DEMY9P DAMY15P DBMY25P DCMY37P DDMY50P Clinch Nut #4-40 UNC DEME9P DAME15P DBME25P DCME37P DDME50P DD Configuration 5,69 (.224) A C O 3,05 (.120) B 2,84 (.112) K E D L 10 10,72 (.422) MAX 2,84 (.112) F W Dimensions Shell Size DE DA DB DC DD 140 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0.76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Solder Cup Connector Receptacle Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Through Hole DEMM9S DAMM15S DBMM25S DCMM37S DDMM50S Military Part Numbers Dual Float Mount DEMMY9S DAMMY15S DBMMY25S DCMMY37S DDMMY50S Clinch Nut #4-40 UNC DEMME9S DAMME15S DBMME25S DCMME37S DDMME50S Through Hole DEM9S DAM15S DBM25S DCM37S DDM50S Commercial Part Numbers Dual Float Mount DEMY9S DAMY15S DBMY25S DCMY37S DDMY50S Clinch Nut #4-40 UNC DEME9S DAME15S DBME25S DCME37S DDME50S Engaging Face DD Configuration 5,69 (.224) A C 2,84 (.112) O 3,05 (.120) B K E D L 10 2,84 (.112) 9,91 (.390) MAX F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 141 D Subminiature Military/High Reliability MIL-C-24308 Cross Reference Military Part Number M24308/1-1 M24308/1-2 M24308/1-3 M24308/1-4 M24308/1-5 M24308/1-12 M24308/1-13 M24308/1-14 M24308/1-15 M24308/1-16 M24308/1-23 M24308/1-24 M24308/1-25 M24308/1-26 M24308/1-27 M24308/2-1 M24308/2-2 M24308/2-3 M24308/2-4 M24308/2-5 M24308/2-6 M24308/2-7 M24308/2-8 M24308/2-9 M24308/2-10 M24308/2-23 M24308/2-24 M24308/2-25 M24308/2-26 M24308/2-27 M24308/2-34 M24308/2-35 M24308/2-36 M24308/2-37 M24308/2-38 M24308/2-281 M24308/2-282 M24308/2-283 M24308/2-284 M24308/2-285 M24308/2-292 M24308/2-293 M24308/2-294 M24308/2-295 M24308/2-296 M24308/2-335 M24308/2-336 M24308/2-341 M24308/2-342 M24308/2-343 M24308/2-344 M24308/2-345 M24308/2-346 M24308/2-353 M24308/2-354 M24308/2-355 M24308/2-356 M24308/2-357 M24308/2-482 M24308/2-483 M24308/2-484 M24308/2-485 M24308/2-486 M24308/3-1 M24308/3-2 142 ITT Cannon Part Number DEMM9S DAMM15S DBMM25S DCMM37S DDMM50S DEMMF9S DAMMF15S DBMMF25S DCMMF37S DDMMF50S DEMMY9S DAMMY15S DBMMY25S DCMMY37S DDMMY50S DEMAM9S DAMAM15S DBMAM25S DCMAM37S DDMAM50S DEMAMT9S DAMAMT15S DBMAMT25S DCMAMT37S DDMAMT50S DEMAMF9S DAMAMF15S DBMAMF25S DCMAMF37S DDMAMF50S DEMAMFT9S DAMAMFT15S DBMAMFT25S DCMAMFT37S DDMAMFT50S DEMAM9S-FO DAMAM15S-FO DBMAM25S-FO DCMAM37S-FO DDMAM50S-FO DEMAMF9S-FO DAMAMF15S-FO DBMAMF25S-FO DCMAMF37S-FO DDMAMF50S-FO DBMAMR25S DCMAMR37S DAMAMR15S DEMAMY9S DAMAMY15S DBMAMY25S DCMAMY37S DDMAMY50S DEMAMYT9S DAMAMYT15S DBMAMYT25S DCMAMYT37S DDMAMYT50S DEMAMY9S-FO DEMAMY15S-FO DEMAMY25S-FO DCMAMY37S-FO DDMAMY50S-FO DEMM9P DAMM15P Military Part Number M24308/3-3 M24308/3-4 M24308/3-5 M24308/3-12 M24308/3-13 M24308/3-14 M24308/3-15 M24308/3-16 M24308/4-1 M24308/4-2 M24308/4-3 M24308/4-4 M24308/4-5 M24308/4-6 M24308/4-7 M24308/4-8 M24308/4-9 M24308/4-10 M24308/4-259 M24308/4-260 M24308/4-261 M24308/4-262 M24308/4-263 M24308/4-302 M24308/4-303 M24308/4-304 M24308/4-305 M24308/4-306 M24308/4-313 M24308/4-314 M24308/4-315 M24308/4-316 M24308/4-317 M24308/4-324 M24308/4-325 M24308/4-326 M24308/4-327 M24308/4-328 M24308/5-1 M24308/5-2 M24308/5-3 M24308/5-4 M24308/5-5 M24308/5-12 M24308/5-13 M24308/5-14 M24308/5-15 M24308/5-16 M24308/5-23 M24308/5-24 M24308/5-25 M24308/5-26 M24308/5-27 M24308/6-1 M24308/6-2 M24308/6-3 M24308/6-4 M24308/6-5 M24308/6-6 M24308/6-7 M24308/6-8 M24308/6-9 M24308/6-10 M24308/6-259 M24308/6-260 ITT Cannon Part Number DBMM25P DCMM37P DDMM50P DEMMF9P DAMMF15P DBMMF25P DCMMF37P DDMMF50P DEMAM9P DAMAM15P DBMAM25P DCMAM37P DDMAM50P DEMAMT9P DAMAMT15P DBMAMT25P DCMAMT37P DDMAMT50P DEMAM9P-FO DAMAM15P-FO DBMAMF25P-FO DCMAM37P-FO DDMAM50P-FO DEMAMF9P DAMAMF15P DBMAMF25P DCMAMF37P DDMAMF50P DEMAMFT9P DAMAMFT15P DBMAMFT25P DCMAMFT37P DDMAMFT50P DEMAMF9P-FO DAMAMF15P-FO DBMAMF25P-FO DCMAMF37P-FO DDMAMF50P-FO DEMM9SNM DAMM15SNM DBMM25SNM DCMM37SNM DDMM50SNM DEMMF9SNM DAMMF15SNM DBMMF25SNM DCMMF37SNM DDMMF50SNM DDMMY9SNM DAMMY15SNM DBMMY25SNM DCMMY37SNM DDMMY50SNM DEMAM9SNM DAMAM15SNM DBMAM25SNM DCMAM37SNM DDMAM50SNM DEMAMT9SNM DAMAMT15SNM DBMAMT25SNM DCMAMT37SNM DDMAMT50SNM DEMAMF9SNM DAMAMF15SNM Military Part Number M24308/6-261 M24308/6-262 M24308/6-263 M24308/6-270 M24308/6-271 M24308/6-272 M24308/6-273 M24308/6-274 M24308/6-281 M24308/6-282 M24308/6-283 M24308/6-284 M24308/6-285 M24308/6-324 M24308/6-325 M24308/6-326 M24308/6-327 M24308/6-328 M24308/6-453 M24308/6-454 M24308/6-455 M24308/6-456 M24308/6-457 M24308/6-464 M24308/6-465 M24308/6-466 M24308/6-467 M24308/6-468 M24308/6-491 M24308/6-492 M24308/6-493 M24308/6-494 M24308/6-495 M24308/7-1 M24308/7-2 M24308/7-3 M24308/7-4 M24308/7-5 M24308/7-12 M24308/7-13 M24308/7-14 M24308/7-15 M24308/7-16 M24308/8-1 M24308/8-2 M24308/8-3 M24308/8-4 M24308/8-5 M24308/8-6 M24308/8-7 M24308/8-8 M24308/8-9 M24308/8-10 M24308/8-259 M24308/8-260 M24308/8-261 M24308/8-262 M24308/8-263 M24308/8-302 M24308/8-303 M24308/8-304 M24308/8-305 M24308/8-306 M24308/8-313 M24308/8-314 ITT Cannon Part Number DBMAMF25SNM DCMAMF37SNM DDMAMF50SNM DEMAMFT9SNM DAMAMFT15SNM DBMAMFT25SNM DCMAMFT37SNM DDMAMFT50SNM DEMAM9SNM-FO DAMAM15SNM-FO DBMAM25SNM-FO DCMAM37SNM-FO DDMAM50SNM-FO DEMAMF9SNM-FO DAMAMF15SNM-FO DBMAMF25SNM-FO DCMAMF37SNM-FO DDMAMF50SNM-FO DEMAMY9SNM DAMAMY15SNM DBMAMY25SNM DCMAMY37SNM DDMAMY50SNM DDMEMYT9SNM DAMAMYT15SNM DBMAMYT25SNM DCMAMYT37SNM DDMAMYT50SNM DEMAMY9SNM-FO DAMAMY15SNM-FO DBMAMY25SNM-FO DCMAMY37SNM-FO DDMAMY50SNM-FO DEMM9PNM DAMM15PNM DBMM25PNM DCMM37PNM DDMM50PNM DEMMF9PNM DAMMF15PNM DBMMF25PNM DCMMF37PNM DDMMF50PNM DEMAM9PNM DAMAM15PNM DBMAM25PNM DCMAM37PNM DDMAM50PNM DEMAMT9PNM DAMAMT15PNM DBMAMT25PNM DCMAMT37PNM DDMAMT50PNM DEMAM9PNM-FO DAMAM15PNM-FO DBMAM25PNM-FO DCMAM37PNM-FO DDMAM50PNM-FO DEMAMF9PNM DAMAMF15PNM DBMAMF25PNM DCMAMF37PNM DDMAMF50PNM DEMAMFT9PNM DAMAMFT15PNM Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability MIL-C-24308 Cross Reference Military Part Number M24308/8-315 M24308/8-316 M24308/8-317 M24308/8-324 M24308/8-325 M24308/8-326 M24308/8-327 M24308/8-328 M24308/9-1 M24308/9-2 M24308/9-3 M24308/9-4 M24308/9-5 M24308/9-6 M24308/9-7 M24308/9-8 M24308/9-9 M24308/9-10 M24308/9-11 M24308/9-12 M24308/9-13 M24308/9-14 M24308/9-15 M24308/9-16 M24308/9-17 M24308/9-18 M24308/9-19 M24308/9-20 M24308/23-1 M24308/23-2 M24308/23-3 M24308/23-4 M24308/23-5 M24308/23-7 M24308/23-8 M24308/23-9 M24308/23-10 M24308/23-11 M24308/23-13 M24308/23-14 M24308/23-15 M24308/23-16 M24308/23-17 M24308/23-19 M24308/23-20 ITT Cannon Part Number DBMAMFT25PNM DCMAMFT37PNM DDMAMFT50PNM DEMAMF9PNM-FO DAMAMF15PNM-FO DBMAMF25PNM-FO DCMAMF37PNM-FO DDMAMF50PNM-FO DEH9P002 DAH15P002 DBH25P002 DCH37P002 DDH50P002 DEH9P001 DAH15P001 DBH25P001 DCH37P001 DDH50P001 DEH9P202 DAH15P202 DBH25P202 DCH37P202 DDH50P202 DEH9P201 DAH15P201 DBH25P201 DCH37P201 DDH50P201 DEMM9SM DAMM15SM DBMM25SM DCMM37SM DDMM50SM DEMM9SZ DAMM15SZ DBMM25SZ DCMM37SZ DDMM50SZ DEMM9SH DAMM15SH DBMM25SH DCMM37SH DDMM50SH DEMM9SX DAMM15SX Military Part Number M24308/23-21 M24308/23-22 M24308/23-23 M24308/23-25 M24308/23-26 M24308/23-27 M24308/23-28 M24308/23-29 M24308/23-31 M24308/23-32 M24308/23-33 M24308/23-34 M24308/23-35 M24308/23-37 M24308/23-38 M24308/23-39 M24308/23-40 M24308/23-41 M24308/23-43 M24308/23-44 M24308/23-45 M24308/23-46 M24308/23-47 M24308/23-49 M24308/23-50 M24308/23-51 M24308/23-52 M24308/23-53 M24308/23-55 M24308/23-56 M24308/23-57 M24308/23-58 M24308/23-59 M24308/24-1 M24308/24-2 M24308/24-3 M24308/24-4 M24308/24-5 M24308/24-7 M24308/24-8 M24308/24-9 M24308/24-10 M24308/24-11 M24308/24-13 M24308/24-14 ITT Cannon Part Number DBMM25SX DCMM37SX DDMM50SX DEMM9SD DAMM15SD DBMM25SD DCMM37SD DDMM50SD DEMM9SL DAMM15SL DBMM25SL DCMM37SL DDMM50SL DEMM9SA DAMM15SA DBMM25SA DCMM37SA DDMM50SA DEMM9SG DAMM15SG DBMM25SG DCMM37SG DDMM50SG DEMM9SS DAMM15SS DBMM25SS DCMM37SS DDMM50SS DEMM9SW DAMM15SW DBMM25SW DCMM37SW DDMM50SW DEMM9PM DAMM15PM DBMM25PM DCMM37PM DDMM50PM DEMM9PZ DAMM15PZ DBMM25PZ DCMM37PZ DDMM50PZ DEMM9PH DAMM15PH Military Part Number M24308/24-15 M24308/24-16 M24308/24-17 M24308/24-19 M24308/24-20 M24308/24-21 M24308/24-22 M24308/24-23 M24308/24-25 M24308/24-26 M24308/24-27 M24308/24-28 M24308/24-29 M24308/24-31 M24308/24-32 M24308/24-33 M24308/24-34 M24308/24-35 M24308/24-37 M24308/24-38 M24308/24-39 M24308/24-40 M24308/24-41 M24308/24-43 M24308/24-44 M24308/24-45 M24308/24-46 M24308/24-47 M24308/24-49 M24308/24-50 M24308/24-51 M24308/24-52 M24308/24-53 M24308/24-55 M24308/24-56 M24308/24-57 M24308/24-58 M24308/24-59 M24308/26-1 M24308/26-2 ITT Cannon Part Number DBMM25PH DCMM37PH DDMM50PH DEMM9PX DAMM15PX DBMM25PX DCMM37PX DDMM50PX DEMM9PD DAMM15PD DBMM25PD DCMM37PD DDMM50PD DEMM9PL DAMM15PL DBMM25PL DCMM37PL DDMM50PL DEMM9PA DAMM15PA DBMM25PA DCMM37PA DDMM50PA DEMM9PG DAMM15PG DBMM25PG DCMM37PG DDMM50PG DEMM9PS DAMM15PS DBMM25PS DCMM37PS DDMM50PS DEMM9PW DAMM15PW DBMM25PW DCMM37PW DDMM50PW D20418-2 D20418-39 Contact Size 20 20 Contact Style Socket Pin Product Line D*MA D*MA MIL Specification MIL-C-24308 MIL-C-24308 MIL-C-39029 Crimp Contacts Military Part Number M39029/63-368 M39029/64-369 ITT Cannon Part Number 031-1007-078 330-5291-097 Dimensions are shown in mm (inch) Dimensions subject to change 143 D Subminiature Military/High Reliability HE501/D*M Cross Reference HE501 Part Number HE501N09AS3 HE501N15AS3 HE501N25AS3 HE501N37AS3 HE501N50AS3 HE501F09AS3 HE501F15AS3 HE501F25AS3 HE501F37AS3 HE501F50AS3 HE501N09YS43 HE501N15YS43 HE501N25YS43 HE501N37YS43 HE501N50YS43 HE501P09VS63E HE501P15VS63E HE501P25VS63E HE501P37VS63E HE501P50VS63E 144 ITT Cannon Part Number DEM9S DAM15S DBM25S DCM37S DDM50S DEMY9S DAMY15S DBMY25S DCMY37S DDMY50S DEM9SOL3 DAM15SOL3 DBM25SOL3 DCM37SOL3 DDM50SOL3 DEM9S1A5N DAM15SA15N DBM25S1A5N DCM37S1A5N DDM50S1A5N HE501 Part Number HE501N9KS33 HE501N15KS33 HE501N25KS33 HE501N37KS33 HE501N50KS33 HE501N09AP HE501N15AP HE501N25AP HE501N37AP HE501N50AP HE501F09AP HE501F15AP HE501F25AP HE501F37AP HE501F50AP ITT Cannon Part Number DEM9SF179A DAM15SF179A DBM25SF179A DCM37SF179A DDM50SF179A DEM9P DAM15P DBM25P DCM37P DDM50P DEMY9P DAMY15P DBMY25P DCMY37P DDMY50P HE501 Part Number HE501N09YP4 HE501N15YP4 HE501N25YP4 HE501N37YP4 HE501N50YP4 HE501P09VP6E HE501P15VP6E HE501P25VP6E HE501P37VP6E HE501P50VP6E HE501N9KP3 HE501N15KP3 HE501N25KP3 HE501N37KP3 HE501N50KP3 ITT Cannon Part Number DEM9POL3 DAM15POL3 DBM25POL3 DCM37POL3 DDM50POL3 DEM9P1A5N DAM15P1A5N DBM25P1A5N DCM39P1A5N DDM50P1A5N DEM9PF179A DAM15PF179A DBM25PF179A DCM37PF179A DDM50PF179A Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Test Data MIL-C-24308 Test Extracts Applicable To Class G Connectors Test Description Mating/Unmating Force Contact Resistance Test Requirements Shell Size Layout Max Unmating (lbs.) Max Mating (lbs.) DE 9 6 10 DA 15 10 17 DB 25 17 28 DC 37 24 39 DD 50 30 49 Contacts shall be retained in their inserts by a 9 pound (minimum) force. The axial displacement of contacts shall not exceed .012 inch while under load. After humidity 1 Megohm (min.) All other conditions 5000 Megohm (min.) After salt spray not to exceed 65 millivolts max. Vibration No damage and no loosening of parts due to vibration. No interruption of electrical continuity longer than 1 microsecond. Shock No damage and no loosening of parts. No interruption of electrical continuity longer than 1 microsecond. Durability No electrical or mechanical defects after 500 cycles of mating and unmating. Salt Spray (Corrosion) No exposure of base metal due to corrosion which will affect performance. Product will meet further tests as specified. Fluid Immersion 20 hours immersion MIL-H-5606 Hydraulic Fluid. 20 hours immersion MIL-L-23699 Lubricating Fluid. Connectors shall meet mating/unmating force following immersion. Contact Retention Insulation Resistance MIL-STD-1344 Test Method 2013 2007 3003 3004 Size 20 AWG; 7.5 A 2005 Test Cond. 4 2004 Test Cond. E 2016 200 100 cycles/hour 1001 Cond. B 1016 Dimensions are shown in mm (inch) Dimensions subject to change 145 D Subminiature Military/High Reliability Coaxial 90 PCB (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 228-229. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMP5C1PJ DAMMP7C2PJ DAMMP11C1PJ DAMMP3C3PJ DAMMP3CK3PJTM DBMMP5C5PJ DBMMP9C4PJ DBMMP13C3PJ DBMMP17C2PJ DBMMP21C1PJ DCMMP8C8PJ DCMMP13C6PJ DCMMP17C5PJ DCMMP21CA4PJ DCMMP25C3PJ DCMMP27C2PJ Part Number Without Screw Locks With Boardlocks DEMMC5C1PJ DAMMC7C2PJ DAMMC11C1PJ DAMMC3C3PJ DAMMC3CK3PJTM DBMMC5C5PJ DBMMC9C4PJ DBMMC13C3PJ DBMMC17C2PJ DBMMC21C1PJ DCMMC8C8PJ DCMMC13C6PJ DCMMC17C5PJ DCMMC21CA4PJ DCMMC25C3PJ DCMMC27C2PJ Part Number With Screw Locks With Boardlocks DEMMG5C1PJ DAMMG7C2PJ DAMMG11C1PJ DAMMG3C3PJ DAMMG3CK3PJTM DBMMG5C5PJ DBMMG9C4PJ DBMMG13C3PJ DBMMG17C2PJ DBMMG21C1PJ DCMMG8C8PJ DCMMG13C6PJ DCMMG17C5PJ DCMMG21CA4PJ DCMMG25C3PJ DCMMG27C2PJ Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1PJ For DD shell size, see page 148. Keyed 0,56 (.023) Engaging Face A O 0,51 (.020) 2,54 (.100) C B E BOARDLOCK 3,89 (.153) MIN 11,94 0,33 (.470 .013) D L 2,92 (.115) 10 O 0,76 (.030) Part Number With Screw Locks Without Boardlocks DEMMD5C1PJ DAMMD7C2PJ DAMMD11C1PJ DAMMD3C3PJ DAMMD3CK3PJTM DBMMD5C5PJ DBMMD9C4PJ DBMMD13C3PJ DBMMD17C2PJ DBMMD21C1PJ DCMMD8C8PJ DCMMD13C6PJ DCMMD17C5PJ DCMMD21CA4PJ DCMMD25C3PJ DCMMD27C2PJ Screw lock, boardlock, and signal contacts removed for clarity 0,82 (.032) 2,84 (.112) BRACKET, METAL 12,34 (.486) 8,64 (.340) RIVNUT #4-40 UNC 4,33 0,38 (.170 .015) 7,18 0,25 (.283 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock, and coaxial contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC 146 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Coaxial 90 PCB (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 231-232. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMP5C1SJ DAMMP7C2SJ DAMMP11C1SJ DAMMP3C3SJ DAMMP3CK3SJTM DBMMP5C5SJ DBMMP9C4SJ DBMMP13C3SJ DBMMP17C2SJ DBMMP21C1SJ DCMMP8C8SJ DCMMP13C6SJ DCMMP17C5SJ DCMMP21CA4SJ DCMMP25C3SJ DCMMP27C2SJ Part Number Without Screw Locks With Boardlocks DEMMC5C1SJ DAMMC7C2SJ DAMMC11C1SJ DAMMC3C3SJ DAMMC3CK3SJTM DBMMC5C5SJ DBMMC9C4SJ DBMMC13C3SJ DBMMC17C2SJ DBMMC21C1SJ DCMMC8C8SJ DCMMC13C6SJ DCMMC17C5SJ DCMMC21CA4SJ DCMMC25C3SJ DCMMC27C2SJ Part Number With Screw Locks Without Boardlocks DEMMD5C1SJ DAMMD7C2SJ DAMMD11C1SJ DAMMD3C3SJ DAMMD3CK3SJTM DBMMD5C5SJ DBMMD9C4SJ DBMMD13C3SJ DBMMD17C2SJ DBMMD21C1SJ DCMMD8C8SJ DCMMD13C6SJ DCMMD17C5SJ DCMMD21CA4SJ DCMMD25C3SJ DCMMD27C2SJ Part Number With Screw Locks With Boardlocks DEMMG5C1SJ DAMMG7C2SJ DAMMG11C1SJ DAMMG3C3SJ DAMMG3CK3SJTM DBMMG5C5SJ DBMMG9C4SJ DBMMG13C3SJ DBMMG17C2SJ DBMMG21C1SJ DCMMG8C8SJ DCMMG13C6SJ DCMMG17C5SJ DCMMG21CA4SJ DCMMG25C3SJ DCMMG27C2SJ Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1SJ For DD shell size, see page 149. Keyed Engaging Face 0,56 (.023) O 0,51 (.020) 2,54 (.100) A C B 11,94 0,33 (.470 .013) D E 3,89 (.153) MIN L 10 BOARDLOCK 2,92 (.115) O 0,76 (.030) 0,79 (.031) Screw lock, boardlock and signal contacts removed for clarity 4,33 0,38 (.170 .015) 2,84 (.112) BRACKET, METAL 12,34 (.486) RIVNUT #4-40 UNC 8,64 (.340) 7,18 0,25 (.283 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock and coaxial contact removed for clarity Note: Dimension varies with altenate bracket configuration, see Reader's Resource page 225. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47.04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 147 D Subminiature Military/High Reliability Coaxial 90 PCB (Size DD) Plug 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMP24C7PJ DDMMP36C4PJ DDMMP43C2PJ DDMMP47C1PJ Part Number Without Screw Locks With Boardlocks DDMMC24C7PJ DDMMC36C4PJ DDMMC43C2PJ DDMMC47C1PJ Part Number With Screw Locks Without Boardlocks DDMMD24C7PJ DDMMD36C4PJ DDMMD43C2PJ DDMMD47C1PJ Part Number With Screw Locks With Boardlocks DDMMG24C7PJ DDMMG36C4PJ DDMMG43C2PJ DDMMG47C1PJ Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMP24X7PJ Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 230. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. SCREW LOCK #4-40 UNC W 11,53 0,25 (.454 .010) 6,50 0,25 (.256 .010) F 10,06 (.396) RIVNUT #4-40 UNC 5,68 (.224) 13,74 (.541) BRACKET, METAL 4,33 0,38 (.170 .015) 2,84 (.112) Engaging Face Screw lock, boardlock, and coaxial contact removed for clarity 10 L E 2,54 (.100) D 11,94 0,33 (.470 .013) O 0,51 (.020) 0,56 (.023) 0,82 (.032) BOARDLOCK 3,89 (.153) MIN 2,92 (.115) O 0,76 (.030) B C A Screw lock, boardlock, and signal contacts removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DD 148 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Coaxial 90 PCB (Size DD) Receptacle 75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMP24C7SJ DDMMP36C4SJ DDMMP43C2SJ DDMMP47C1SJ Part Number Without Screw Locks With Boardlocks DDMMC24C7SJ DDMMC36C4SJ DDMMC43C2SJ DDMMC47C1SJ Part Number With Screw Locks Without Boardlocks DDMMD24C7SJ DDMMD36C4SJ DDMMD43C2SJ DDMMD47C1SJ Part Number With Screw Locks With Boardlocks DDMMG24C7SJ DDMMG36C4SJ DDMMG43C2SJ DDMMG47C1SJ Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMG36X4SJ Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 233. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC W F 10,06 (.396) 13,74 (.541) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC 5,68 (.224) 2,84 (.112) BRACKET, METAL 4,33 0,38 (.170 .015) Screw lock, boardlock, and coaxial contacts removed for clarity Engaging Face 10 L 2,54 (.100) 11,94 0,33 (.470 .013) O 0,51 (.020) D E 3,89 (.153) MIN 2,92 (.115) BOARDLOCK O 0,76 (.030) 0,82 (.032) B 0,56 (.023) C A Screw lock, boardlock, and signal contacts removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 149 D Subminiature Military/High Reliability Coaxial Straight PCB (Sizes DE-DC) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 238-239. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5C1PN DAMMV7C2PN DAMMV11C1PN DAMMV3C3PN DAMMV3CK3PNTM DBMMV5C5PN DBMMV9C4PN DBMMV13C3PN DBMMV17C2PN DBMMV21C1PN DCMMV8C8PN DCMMV13C6PN DCMMV17C5PN DCMMV21CA4PN DCMMV25C3PN DCMMV27C2PN Part Number Without Screw Locks With Boardlocks DEMMZ5C1PN DAMMZ7C2PN DAMMZ11C1PN DAMMZ3C3PN DAMMZ3CK3PNTM DBMMZ5C5PN DBMMZ9C4PN DBMMZ13C3PN DBMMZ17C2PN DBMMZ21C1PN DCMMZ8C8PN DCMMZ13C6PN DCMMZ17C5PN DCMMZ21CA4PN DCMMZ25C3PN DCMMZ27C2PN Part Number With Screw Locks With Boardlocks DEMMN5C1PN DAMMN7C2PN DAMMN11C1PN DAMMN3C3PN DAMMN3CK3PNTM DBMMN5C5PN DBMMN9C4PN DBMMN13C3PN DBMMN17C2PN DBMMN21C1PN DCMMN8C8PN DCMMN13C6PN DCMMN17C5PN DCMMN21CA4PN DCMMN25C3PN DCMMN27C2PN Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1PN For DD shell size, see page 152. Keyed Engaging Face A 2,54 (.100) C O 0,51 (.020) 0,62 (.024) B E D L 10 Screw lock, boardlock, and signal contacts removed for clarity O 0,76 (.030) BOARDLOCK 0,82 (.032) 3,45 (.136) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC F Screw lock, boardlock, and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC 150 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Coaxial Straight PCB (Sizes DE-DC) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 241-242. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5C1SN DAMMV7C2SN DAMMV11C1SN DAMMV3C3SN DAMMV3CK3SNTM DBMMV5C5SN DBMMV9C4SN DBMMV13C3SN DBMMV17C2SN DBMMV21C1SN DCMMV8C8SN DCMMV13C6SN DCMMV17C5SN DCMMV21CA4SN DCMMV25C3SN DCMMV27C2SN Part Number Without Screw Locks With Boardlocks DEMMZ5C1SN DAMMZ7C2SN DAMMZ11C1SN DAMMZ3C3SN DAMMZ3CK3SNTM DBMMZ5C5SN DBMMZ9C4SN DBMMZ13C3SN DBMMZ17C2SN DBMMZ21C1SN DCMMZ8C8SN DCMMZ13C6SN DCMMZ17C5SN DCMMZ21CA4SN DCMMZ25C3SN DCMMZ27C2SN Part Number With Screw Locks With Boardlocks DEMMN5C1SN DAMMN7C2SN DAMMN11C1SN DAMMN3C3SN DAMMN3CK3SNTM DBMMN5C5SN DBMMN9C4SN DBMMN13C3SN DBMMN17C2SN DBMMN21C1SN DCMMN8C8SN DCMMN13C6SN DCMMN17C5SN DCMMN21CA4SN DCMMN25C3SN DCMMN27C2SN Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1SN For DD shell size, see page 153. Keyed Engaging Face A O 0,51 (.020) 2,54 (1.00) C 0,62 (.024) B E D L 10 Screw lock, boardlock, and signal contacts removed for clarity BOARDLOCK 0,82 (.032) 3,45 (.136) O 0,76 (.030) 4,52 (.178) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) W SCREW LOCK #4-40 UNC F Hardware and coaxial contact removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 151 D Subminiature Military/High Reliability Coaxial Straight PCB (Size DD) Plug 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMV24C7PN DDMMV36C4PN DDMMV43C2PN DDMMV47C1PN Part Number Without Screw Locks With Boardlocks DDMMZ24C7PN DDMMZ36C4PN DDMMZ43C2PN DDMMZ47C1PN Part Number With Screw Locks With Boardlocks DDMMN24C7PN DDMMN36C4PN DDMMN43C2PN DDMMN47C1PN Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24XPN Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 256. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face O 0,51 (.020) A 2,54 (.100) C 0,62 (.024) B D E L Screw lock, boardlock, and signal contacts removed for clarity 10 BOARDLOCK 0,82 (.032) 3,45 (.136) O 0,76 (.030) 7,62 0,25 (.300 .010) 5,69 (.224) 2,84 (.112) 4,52 (.178) 2,92 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W Screw lock, boardlock, and coaxial contact removed for clarity SCREW LOCK #4-40 UNC Dimensions Shell Size DD 152 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Coaxial Straight PCB (Size DD) Receptacle 75 Ohm Part Numbers* with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMV24C7SN DDMMV36C4SN DDMMV43C2SN DDMMV47C1SN Part Number Without Screw Locks With Boardlocks DDMMZ24C7SN DDMMZ36C4SN DDMMZ43C2SN DDMMZ47C1SN Part Number With Screw Locks With Boardlocks DDMMN24C7SN DDMMN36C4SN DDMMN43C2SN DDMMN47C1SN Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24X7SN Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 259. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate 50 Ohm coaxial configuration, see page 225. Engaging Face A 2,54 (.100) C B O 0,51 (.020) 0,62 (.024) D E L 10 BOARDLOCK Screw lock, boardlock, and signal contacts removed for clarity 0,82 (.032) 3,45 (.136) O 0,76 (.030) 4,52 (.178) 7,62 0,25 (.300 .010) 5,69 (.224) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) F W SCREW LOCK #4-40 UNC Screw lock, boardlock, and coaxial contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 153 D Subminiature Military/High Reliability 40 A High Power 90 PCB (Sizes DE-DC) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 244-245. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMP5H1PJ DAMMP7H2PJ DAMMP11H1PJ DAMMP3H3PJ DAMMP3HK3PJTM DBMMP5H5PJ DBMMP9H4PJ DBMMP13H3PJ DBMMP17H2PJ DBMMP21H1PJ DCMMP8H8PJ DCMMP13H6PJ DCMMP17H5PJ DCMMP21HA4PJ DCMMP25H3PJ DCMMP27H2PJ Part Number Without Screw Locks With Boardlocks DEMMC5H1PJ DAMMC7H2PJ DAMMC11H1PJ DAMMC3H3PJ DAMMC3HK3PJTM DBMMC5H5PJ DBMMC9H4PJ DBMMC13H3PJ DBMMC17H2PJ DBMMC21H1PJ DCMMC8H8PJ DCMMC13H6PJ DCMMC17H5PJ DCMMC21HA4PJ DCMMC25H3PJ DCMMC27H2PJ Part Number With Screw Locks Without Boardlocks DEMMD5H1PJ DAMMD7H2PJ DAMMD11H1PJ DAMMD3H3PJ DAMMD3HK3PJTM DBMMD5H5PJ DBMMD9H4PJ DBMMD13H3PJ DBMMD17H2PJ DBMMD21H1PJ DCMMD8H8PJ DCMMD13H6PJ DCMMD17H5PJ DCMMD21HA4PJ DCMMD25H3PJ DCMMD27H2PJ Part Number With Screw Locks With Boardlocks DEMMG5H1PJ DAMMG7H2PJ DAMMG11H1PJ DAMMG3H3PJ DAMMG3HK3PJTM DBMMG5H5PJ DBMMG9H4PJ DBMMG13H3PJ DBMMG17H2PJ DBMMG21H1PJ DCMMG8H8PJ DCMMG13H6PJ DCMMG17H5PJ DCMMG21HA4PJ DCMMG25H3PJ DCMMG27H2PJ Notes: For DD shell size, see page 156. Keyed 3,89 (.153) MIN. Engaging Face A C B 20,57 0,38 (.810 .015) E D L BOARDLOCK 10 O 0,76 (.030) O 3,18 (.125) 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity 2,84 (.112) 4,33 0,38 (.170 .015) BRACKET, METAL 12,34 (.486) 8,64 (.340) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC 154 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 40 A High Power 90 PCB (Sizes DE-DC) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 247-248. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMP5H1SJ DAMMP7H2SJ DAMMP11H1SJ DAMMP3H3SJ DAMMP3HK3SJTM DBMMP5H5SJ DBMMP9H4SJ DBMMP13H3SJ DBMMP17H2SJ DBMMP21H1SJ DCMMP8H8SJ DCMMP13H6SJ DCMMP17H5SJ DCMMP21HA4SJ DCMMP25H3SJ DCMMP27H2SJ Part Number Without Screw Locks With Boardlocks DEMMC5H1SJ DAMMC7H2SJ DAMMC11H1SJ DAMMC3H3SJ DAMMC3HK3SJTM DBMMC5H5SJ DBMMC9H4SJ DBMMC13H3SJ DBMMC17H2SJ DBMMC21H1SJ DCMMC8H8SJ DCMMC13H6SJ DCMMC17H5SJ DCMMC21HA4SJ DCMMC25H3SJ DCMMC27H2SJ Part Number With Screw Locks Without Boardlocks DEMMD5H1SJ DAMMD7H2SJ DAMMD11H1SJ DAMMD3H3SJ DAMMD3HK3SJTM DBMMD5H5SJ DBMMD9H4SJ DBMMD13H3SJ DBMMD17H2SJ DBMMD21H1SJ DCMMD8H8SJ DCMMD13H6SJ DCMMD17H5SJ DCMMD21HA4SJ DCMMD25H3SJ DCMMD27H2SJ Part Number With Screw Locks With Boardlocks DEMMG5H1SJ DAMMG7H2SJ DAMMG11H1SJ DAMMG3H3SJ DAMMG3HK3SJTM DBMMG5H5SJ DBMMG9H4SJ DBMMG13H3SJ DBMMG17H2SJ DBMMG21H1SJ DCMMG8H8SJ DCMMG13H6SJ DCMMG17H5SJ DCMMG21HA4SJ DCMMG25H3SJ DCMMG27H2SJ Notes: For DD shell size, see page 157. Keyed. 3,89 (.153) MIN. Engaging Face 20,57 0,38 (.810 .015) L 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity O 0,76 (.030) 4,33 0,38 (.170 .015) 2,84 (.112) BRACKET, METAL 12,34 (.486) 11,53 0,25 (.454 .010) RIVNUT #4-40 UNC 8,64 (.340) F W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 155 D Subminiature Military/High Reliability 40 A High Power 90 PCB (Size DD) Plug Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMP24H7PJ DDMMP36H4PJ DDMMP43H2PJ DDMMP47H1PJ Part Number Without Screw Locks With Boardlocks DDMMC24H7PJ DDMMC36H4PJ DDMMC43H2PJ DDMMC47H1PJ Part Number With Screw Locks Without Boardlocks DDMMD24H7PJ DDMMD36H4PJ DDMMD43H2PJ DDMMD47H1PJ Part Number With Screw Locks With Boardlocks DDMMG24H7PJ DDMMG36H4PJ DDMMG43H2PJ DDMMG47H1PJ Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 246. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 0,38 (.810 .015) D E L 2,92 (.115) 10 BOARDLOCK O 3.18 (.125) Screw lock, boardlock, and signal contacts removed for clarity O 0,76 (.030) 2,84 (.112) 4,33 0,38 (.170 .015) 5,68 (.224) BRACKET, METAL 13,74 (.541) RIVNUT #4-40 UNC 10,06 (.396) 11,53 0,25 (.454 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DD 156 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 40 A High Power 90 PCB (Size DD) Receptacle Part Numbers with Metal Bracket and Rivnut #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMP24H7SJ DDMMP36H4SJ DDMMP43H2SJ DDMMP47H1SJ Part Number Without Screw Locks With Boardlocks DDMMC24H7SJ DDMMC36H4SJ DDMMC43H2SJ DDMMC47H1SJ Part Number With Screw Locks Without Boardlocks DDMMD24H7SJ DDMMD36H4SJ DDMMD43H2SJ DDMMD47H1SJ Part Number With Screw Locks With Boardlocks DDMMG24H7SJ DDMMG36H4SJ DDMMG43H2SJ DDMMG47H1SJ Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 249. For panel cutouts, see page 221. For hardware views (Standard), see page 226. For alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. Engaging Face A 3,89 (.153) MIN C B 20,57 0,38 (.810 .015) E D L 10 BOARDLOCK O 3,18 (.125) O 0,76 (.030) 2,92 (.115) Screw lock, boardlock, and signal contacts removed for clarity 2,84 (.112) BRACKET, METAL RIVNUT #4-40 UNC 13,74 (.541) 10,06 (.396) 4,33 0,38 (.170 .015) 5,68 (.224) 11,53 0,25 (.454 .010) W 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F Screw lock, boardlock, and high power contact removed for clarity Note: Dimension varies with alternate bracket configuration, see Reader's Resource page 226. Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 157 D Subminiature Military/High Reliability 40 A High Power Straight PCB (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 254-255. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5H1PN DAMMV7H2PN DAMMV11H1PN DAMMV3H3PN DAMMV3HK3PNTM DBMMV5H5PN DBMMV9H4PN DBMMV13H3PN DBMMV17H2PN DBMMV21H1PN DCMMV8H8PN DCMMV13H6PN DCMMV17H5PN DCMMV21HA4PN DCMMV25H3PN DCMMV27H2PN Part Number Without Screw Locks With Boardlocks DEMMZ5H1PN DAMMZ7H2PN DAMMZ11H1PN DAMMZ3H3PN DAMMZ3HK3PNTM DBMMZ5H5PN DBMMZ9H4PN DBMMZ13H3PN DBMMZ17H2PN DBMMZ21H1PN DCMMZ8H8PN DCMMZ13H6PN DCMMZ17H5PN DCMMZ21HA4PN DCMMZ25H3PN DCMMZ27H2PN Part Number With Screw Locks With Boardlocks DEMMN5H1PN DAMMN7H2PN DAMMN11H1PN DAMMN3H3PN DAMMN3HK3PNTM DBMMN5H5PN DBMMN9H4PN DBMMN13H3PN DBMMN17H2PN DBMMN21H1PN DCMMN8H8PN DCMMN13H6PN DCMMN17H5PN DCMMN21HA4PN DCMMN25H3PN DCMMN27H2PN Notes: For DD shell sizes, see page 160. Keyed. Engaging Face A C B D E 10 O 3,18 (.125) BOARDLOCK 4,65 (.183) O 0,76 (.030) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) L W F Screw lock, boardlock and high power contact removed for clarity SCREW LOCK #4-40 UNC Dimensions Shell Size DE DA DB DC 158 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 40 A High Power Straight PCB (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 257-258. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5H1SN DAMMV7H2SN DAMMV11H1SN DAMMV3H3SN DAMMV3HK3SNTM DBMMV5H5SN DBMMV9H4SN DBMMV13H3SN DBMMV17H2SN DBMMV21H1SN DCMMV8H8SN DCMMV13H6SN DCMMV17H5SN DCMMV21HA4SN DCMMV25H3SN DCMMV27H2SN Part Number Without Screw Locks With Boardlocks DEMMZ5H1SN DAMMZ7H2SN DAMMZ11H1SN DAMMZ3H3SN DAMMZ3HK3SNTM DBMMZ5H5SN DBMMZ9H4SN DBMMZ13H3SN DBMMZ17H2SN DBMMZ21H1SN DCMMZ8H8SN DCMMZ13H6SN DCMMZ17H5SN DCMMZ21HA4SN DCMMZ25H3SN DCMMZ27H2SN Part Number With Screw Locks With Boardlocks DEMMN5H1SN DAMMN7H2SN DAMMN11H1SN DAMMN3H3SN DAMMN3HK3SNTM DBMMN5H5SN DBMMN9H4SN DBMMN13H3SN DBMMN17H2SN DBMMN21H1SN DCMMN8H8SN DCMMN13H6SN DCMMN17H5SN DCMMN21HA4SN DCMMN25H3SN DCMMN27H2SN Notes: For DD shell sizes, see page 161. Keyed. Engaging Face A C B D E 10 BOARDLOCK O 0,76 (.030) O 3,18 (.125) 4,65 (.183) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) L SCREW LOCK #4-40 UNC W F Screw lock, boardlock and high power contact removed for clarity Dimensions Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 159 D Subminiature Military/High Reliability 40 A High Power Straight PCB (Size DD) Plug Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks Without Boardlocks DDMMV24H7PN DDMMV36H4PN DDMMV43H2PN DDMMV47H1PN Part Number Without Screw Locks With Boardlocks DDMMZ24H7PN DDMMZ36H4PN DDMMZ43H2PN DDMMZ47H1PN Part Number With Screw Locks With Boardlocks DDMMN24H7PN DDMMN36H4PN DDMMN43H2PN DDMMN47H1PN Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 256. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B D E 10 O 3,18 (.125) BOARDLOCK 4,65 (.183) O 0,76 (.030) 5,69 (.224) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W L Screw lock, boardlock, and high power contact removed for clarity Dimensions Shell Size DD 160 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability 40 A High Power Straight PCB (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Part Number Without Screw Locks Without Boardlocks DDMMV24H7SN DDMMV36H4SN DDMMV43H2SN DDMMV47H1SN Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks With Boardlocks DDMMZ24H7SN DDMMZ36H4SN DDMMZ43H2SN DDMMZ47H1SN Part Number With Screw Locks With Boardlocks DDMMN24H7SN DDMMN36H4SN DDMMN43H2SN DDMMN47H1SN Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 259. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B D E 10 O 3,18 (.125) O 0,76 (.030) BOARDLOCK 4,65 (.183) 5,69 (.224) 2,84 (.112) 4,52 (.178) 7,62 0,25 (.300 .010) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC F W L Screw lock, boardlock and high power contact removed for clarity Dimensions Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 161 D Subminiature Military/High Reliability High Voltage Straight PCB (Sizes DE-DC) Plug Part Numbers with Standoff #4-40 UNC Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see pages 254-255. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5V1PN DAMMV7V2PN DAMMV11V1PN DAMMV3V3PN DAMMV3VK3PNTM DBMMV5V5PN DBMMV9V4PN DBMMV13V3PN DBMMV17V2PN DBMMV21V1PN DCMMV8V8PN DCMMV13V6PN DCMMV17V5PN DCMMV21VA4PN DCMMV25V3PN DCMMV27V2PN Part Number Without Screw Locks With Boardlocks DEMMZ5V1PN DAMMZ7V2PN DAMMZ11V1PN DAMMZ3V3PN DAMMZ3VK3PNTM DBMMZ5V5PN DBMMZ9V4PN DBMMZ13V3PN DBMMZ17V2PN DBMMZ21V1PN DCMMZ8V8PN DCMMZ13V6PN DCMMZ17V5PN DCMMZ21VA4PN DCMMZ25V3PN DCMMZ27V2PN Part Number With Screw Locks With Boardlocks DEMMN5V1PN DAMMN7V2PN DAMMN11V1PN DAMMN3V3PN DAMMN3VK3PNTM DBMMN5V5PN DBMMN9V4PN DBMMN13V3PN DBMMN17V2PN DBMMN21V1PN DCMMN8V8PN DCMMN13V6PN DCMMN17V5PN DCMMN21VA4PN DCMMN25V3PN DCMMN27V2PN Notes: For DD shell size, see page 164. Keyed. Engaging Face A C B E D 10 O 0,76 (.030) 4,52 (.178) BOARDLOCK 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) F STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W L SCREW LOCK #4-40 UNC Hardware and high voltage contact removed for clarity Dimensions Plug Shell Size DE DA DB DC 162 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) W 0,37 (.015) 6,69 (.264) 6,69 (.264) -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability High Voltage Straight PCB (Sizes DE-DC) Receptacle Part Numbers with Standoff #4-40 UNC Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see pages 257-258. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 Part Number Without Screw Locks Without Boardlocks DEMMV5V1SN DAMMV7V2SN DAMMV11V1SN DAMMV3V3SN DAMMV3VK3SNTM DBMMV5V5SN DBMMV9V4SN DBMMV13V3SN DBMMV17V2SN DBMMV21V1SN DCMMV8V8SN DCMMV13V6SN DCMMV17V5SN DCMMV21VA4SN DCMMV25V3SN DCMMV27V2SN Part Number Without Screw Locks With Boardlocks DEMMZ5V1SN DAMMZ7V2SN DAMMZ11V1SN DAMMZ3V3SN DAMMZ3VK3SNTM DBMMZ5V5SN DBMMZ9V4SN DBMMZ13V3SN DBMMZ17V2SN DBMMZ21V1SN DCMMZ8V8SN DCMMZ13V6SN DCMMZ17V5SN DCMMZ21VA4SN DCMMZ25V3SN DCMMZ27V2SN Part Number With Screw Locks With Boardlocks DEMMN5V1SN DAMMN7V2SN DAMMN11V1SN DAMMN3V3SN DAMMN3VK3SNTM DBMMN5V5SN DBMMN9V4SN DBMMN13V3SN DBMMN17V2SN DBMMN21V1SN DCMMN8V8SN DCMMN13V6SN DCMMN17V5SN DCMMN21VA4SN DCMMN25V3SN DCMMN27V2SN Notes: For DD shell size, see page 165. Keyed. Engaging Face A C B E D 10 O 0,76 (.030) BOARDLOCK 7,62 0,25 (.300 .010) 4,52 (.178) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) W L SCREW LOCK #4-40 UNC F Hardware and high voltage contact removed for clarity. Dimensions Receptacle Shell Size DE DA DB DC A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 163 D Subminiature Military/High Reliability High Voltage Straight PCB (Size DD) Plug Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Part Number Without Screw Locks Without Boardlocks DDMMV24V7PN DDMMV36V4PN DDMMV43V2PN DDMMV47V1PN Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks With Boardlocks DDMMZ24V7PN DDMMZ36V4PN DDMMZ43V2PN DDMMZ47V1PN Part Number With Screw Locks With Boardlocks DDMMN24V7PN DDMMN36V4PN DDMMN43V2PN DDMMN47V1PN Reader's Resource For contact cavity arrangements, see page 222. For P.C. hole patterns, see page 256. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B E D 10 O 0,76 (.030) 5,69 (.224) 4,52 (.178) BOARDLOCK 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC W L F Hardware and high voltage contact removed for clarity. Dimensions Plug Shell Size DD 164 A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,81 (2.079) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 11,07 (.436) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,82 (.426) W 0,41 (.016) 6,84 (.269) L 0,25 (.010) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability High Voltage Straight PCB (Size DD) Receptacle Part Numbers with Standoff #4-40 UNC Shell Size DD DD DD DD Part Number Without Screw Locks Without Boardlocks DDMMV24V7SN DDMMV36V4SN DDMMV43V2SN DDMMV47V1SN Layout 24W7 36W4 43W2 47W1 Part Number Without Screw Locks With Boardlocks DDMMZ24V7SN DDMMZ36V4SN DDMMZ43V2SN DDMMZ47V1SN Part Number With Screw Locks With Boardlocks DDMMN24V7SN DDMMN36V4SN DDMMN43V2SN DDMMN47V1SN Reader's Resource For contact cavity arrangements, see page 223. For P.C. hole patterns, see page 259. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Engaging Face A C B E D 10 O 0,76 (.030) BOARDLOCK 5,69 (.224) 4,52 (.178) 7,62 0,25 (.300 .010) 2,84 (.112) 2,92 (.115) STANDOFF #4-40 UNC 6,50 0,25 (.256 .010) SCREW LOCK #4-40 UNC L W F Hardware and high voltage contacts removed for clarity Dimensions Receptacle Shell Size DD A 0,38 (.015) 66,93 (2.635) B 0,13 (.005) 52,42 (2.064) C 0,13 (.005) 61,11 (2.406) D 0,13 (.005) 10,74 (.423) E 0,38 (.015) 15,37 (.605) F 0,25 (.010) 10,90 (.429) W 0,38 (.015) 6,94 (.273) L 0,25 (.010) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 165 D Subminiature Military/High Reliability Cable Solder Cup Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 222. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Through Hole DEMM5W1P DAMM7W2P DAMM11W1P DAMM3W3P DAMM3WK3P DBMMP5W5P DBMM9W4P DBMM13W3P DBMM17W2P DBMM21W1P DCMM8W8P DCMM13W6P DCMM17W5P DCMM21WA4P DCMM25W3P DCMM27W2P DDMM24W7P DDMM36W4P DDMM43W2P DDMM47W1P Dual Float Mount DEMMY5W1P DAMMY7W2P DAMMY11W1P DAMMY3W3P DAMMY3WK3P DBMMY5W5P DBMMY9W4P DBMMY13W3P DBMMY17W2P DBMMY21W1P DCMMY8W8P DCMMY13W6P DCMMY17W5P DCMMY21WA4P DCMMY25W3P DCMMY27W2P DDMMY24W7P DDMMY36W4P DDMMY43W2P DDMMY47W1P Clinch Nut #4-40 UNC DEMME5W1P DAMME7W2P DAMME11W1P DAMME3W3P DAMME3WK3P DBMME5W5P DBMME9W4P DBMME13W3P DBMME17W2P DBMME21W1P DCMME8W8P DCMME13W6P DCMME17W5P DCMME21WA4P DCMME25W3P DCMME27W2P DDMME24W7P DDMME36W4P DDMME43W2P DDMME47W1P Note: Keyed. DD Configuration Engaging Face 5,69 (.224) A C 2,84 (.112) O 3,05 (.120) B K D E L 10 10,72 (.422) MAX 2,84 (.112) F W Dimensions Shell Size DE DA DB DC DD 166 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Military/High Reliability Cable Solder Cup Part Numbers Receptacle Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Reader's Resource For contact cavity arrangements, see page 223. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Dual Float Mount DEMMY5W1S DAMMY7W2S DAMMY11W1S DAMMY3W3S DAMMY3WK3S DBMMY5W5S DBMMY9W4S DBMMY13W3S DBMMY17W2S DBMMY21W1S DCMMY8W8S DCMMY13W6S DCMMY17W5S DCMMY21WA4S DCMMY25W3S DCMMY27W2S DCMMY24W7S DCMMY36W4S DCMMY43W2S DCMMY47W1S Through Hole DEMM5W1S DAMM7W2S DAMM11W1S DAMM3W3S DAMM3WK3S DBMM5W5S DBMM9W4S DBMM13W3S DBMM17W2S DBMM21W1S DCMM8W8S DCMM13W6S DCMM17W5S DCMM21WA4S DCMM25W3S DCMM27W2S DCMM24W7S DCMM36W4S DCMM43W2S DCMM47W1S Clinch Nut #4-40 UNC DEMME5W1S DAMME7W2S DAMME11W1S DAMME3W3S DAMME3WK3S DBMME5W5S DBMME9W4S DBMME13W3S DBMME17W2S DBMME21W1S DCMME8W8S DCMME13W6S DCMME17W5S DCMME21WA4S DCMME25W3S DCMME27W2S DCMME24W7S DCMME36W4S DCMME43W2S DCMME47W1S Note: Keyed. Engaging Face DD Configuration 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B K E D L 10 2,84 (.112) 9,91 (.390) MAX F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.123) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 167 D Subminiature Selection Index Space/High Reliability Page Space/High Reliability An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Standard Layout Connectors Straight PC Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 90 PC Tail with Plastic Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 D*MA Crimp Contact Cable Connectors Standard Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 High Density. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Contact Cavity Arrangements -- High Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 Crimp Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Combo D Layout Solder Cup Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Cable (Size 8) Loose Contacts Coaxial 50 Ohm -- Straight Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 High Power -- Solder or Crimp and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 Accessories Metal Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Screw Lock Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 NASA/GSFC Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 ESA-SCC Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 168 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability I TT Cannon has a long history of providing high performance D Subminiature connectors for space applications (qualified by NASA/ GFSC and the European Space Agency). Space/ High Reliabilty D*M and D*MA connectors meet stringent tests for outgassing and residual magnetism and are suitable for use in space, medical, and high performance military/aerospace applications. D*M and D*MA connectors meet the performance and dimensional requirements of MIL-C-24308. The newest product group is High Density D*MA crimp connectors. Applications Space - Low/High Orbit Satellites Medical Product Features Non-Magnetic No Outgassing Specifications Temperature Rating Signal Contact Current Rating Signal Contact Resistance Wire Accommodation (Solder) Wire Accommodation (Crimp) Coaxial Impedance Loss VSWR Coaxial Insertion Loss -65 at 125C 5 A (20 AWG) 55 millivolt max. at 7.5 A test current 20 AWG max. 18/30 AWG 50 Ohm Less than 1,3 - 1,0 up to 500 Mhz 1db loss at 500 Mhz Dimensions are shown in mm (inch) Dimensions subject to change 169 D Subminiature Space/High Reliability Dielectric Withstanding Voltage Average Flashover Test Type of Contact Center Conductor to Coaxial Shell Coaxial Shell to Nearest Solder Cup Contact High Power Contact and/or Coaxial Shell to Plug Shell Size 20 Signal Contact Average Flashover Test Average Flashover Test Average Flashover Test Average Flashover Test Sea Level 1500/1700 1000/1250 90 1200 800 -- -- 1500 1000 1200 1250 Sea Level 1500/1700 1000/1250 Straight 1500 1000 1500 1000 1500 1000 1200 1250 6 096/20 000 1000/1000 650/750 90 900 600 -- -- 1000 650 1000 750 Altitude (meter/feet) 6 096/20 000 15 240/50 000 1000/1000 500/650 650/750 325/475 Straight 90 1000 600 550 400 1500 -- 1000 -- 1000 500 650 325 1000 650 750 475 15 240/50 000 500/650 325/475 Straight 700 475 900 800 500 325 650 475 21 336/70 000 500/500 325/375 90 400 275 -- -- 500 325 500 375 21 336/70 000 500/500 325/375 Straight 500 325 650 425 500 325 500 375 All voltage figures are rms AC 60 rms cps. Measured at approximately +25C, 50% rh. For additional performance specifications refer to MIL-C-24308. Residual Magnetism Level Residual Magnetism 20 000 Gamma 200 Gamma Suffix Code NM NMB Note: NMC is available by special request. Consult factory for details. 170 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Materials and Finishes Connector Assembly (Shells -- Yellow Chromate over Cadmium) Description Material Shell Brass per QQ-B-613 Insulator Contact Float Mount, Brackets, Captive Nuts Hardware Diallyl Phthalate glass-filled per MIL-M-14, type SDG-F, Color: White (or functional equivalent polyester)* Copper alloy Brass Connector Assembly (Shells -- Gold over Copper -- K52) Shell Brass per QQ-B-613 Insulator Contact Float Mount, Brackets, Captive Nuts Hardware Diallyl Phthalate glass-filled per MIL-M-14, type SDG-F, Color: White (or functional equivalent polyester)* Copper alloy Brass Coaxial/High Power Contact Assemblies Outer Coaxial Shell Copper alloy Center Coaxial Contact Copper alloy Insulator (Coaxial Only) Retaining Ring High Power Contact Teflon Copper alloy Copper alloy Finish Yellow chromate over cadmium QQ-P-416, Type II, Class 2 None Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 Yellow chromate over cadmium QQ-P-416, Type II, Class 2 Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 None Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 Gold Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 None Gold Gold 50 microinches min. thickness per MIL-G-45204, Type II, Class 1 over copper per MIL-C-14550 * Pending qualification Dimensions are shown in mm (inch) Dimensions subject to change 171 D Subminiature Space/High Reliability Straight PC Tail Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 275. For panel cutouts, see page 221. For hardware views (Standard), see page 226. PC Tail Modifiers M Z OL3 X 4,01 0,69 (.158 .027) 4,65 0,69 (.183 .027) 4,20 1,10 (.185 .043) WY 0,76 0,08 (.030 .003) 0,76 0,08 (.030 .003) 0,60 0,08 (.023 .003) Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMY9POL3NM* DAMY15POL3NM* DBMY25POL3NM* DCMY37POL3NM* DDMY50POL3NM* Through Hole DEM9POL3NM* DAM15POL3NM* DBM25POL3NM* DCM37POL3NM* DDM50POL3NM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9POL3NMB For shells with 50 microinches gold, add K52. Example: DEM9POL3NMK52 For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9PZNM Engaging Face DD Configuration A 5,69 (.224) C B O 3,05 (.120) 2,84 (.112) K E D L 10 OY X Dimensions Shell Size DE DA DB DC DD 172 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (0.39) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Straight PC Tail Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 275. For panel cutouts, see page 221. For hardware views (Standard), see page 226. PC Tail Modifiers M X 4,01 0,69 (.158 .027) 4,65 0,69 (.183 .027) 4,20 1,10 (.185 .043) Z OL3 Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMY9SOL3NM* DAMY15SOL3NM* DBMY25SOL3NM* DCMY37SOL3NM* DDMY50SOL3NM* Through Hole DEM9SOL3NM* DAM15SOL3NM* DBM25SOL3NM* DCM37SOL3NM* DDM50SOL3NM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SOL3NMB For shells with 50 microinches gold, add K52. Example: DEM9SOL3NMK52 For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9SZNM WY 0,76 0,08 (.030 .003) 0,76 0,08 (.030 .003) 0,60 0,08 (.023 .003) DD Configuration Engaging Face 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B K D E L 10 2,84 (.112) OY X W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 173 D Subminiature Space/High Reliability 90 PC Tail with Plastic Bracket Plug Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. Layout 9 15 25 37 50 Part Number DEM9PLNM* DAM15PLNM* DBM25PLNM* DCM37PLNM* DDM50PLNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PLNMB For shells with 50 microinches gold, add K52. Example: DEM9PLNMK52 DD Configuration Engaging Face 2,84 (.112) A 5,68 (.224) C B E 4,01 0,69 (.158 .027) D 7,18 0,25 (.283 .010) 10 O 0,76 (.030) O 3,05 (.120) M L 2,84 (.112) 4,01 0,69 (.158 .027) N F 7,18 0,25 (.283 .010) W Dimensions Shell Size DE DA DB DC DD 174 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W 0,25 (.010) 0,368 (.0145) 0,41 (.016) 10,72 (.422) 6,693 (.2635) -- 10,72 (.422) 6,693 (.2635) -- 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) 10,82 (.426) -- 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) M 0,25 (.010) 12,30 (.484) 12,30 (.484) 12,30 (.484) 12,30 (.484) 15,09 (.594) N 0,13 (.005) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,04 (.395) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability 90 PC Tail with Plastic Bracket Receptacle Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 272. For panel cutouts, see page 221. Layout 9 15 25 37 50 Part Number DEM9SLNM* DAM15SLNM* DBM25SLNM* DCM37SLNM* DDM50SLNM* Notes: * For Residual Magnetism Levels of 200 gamma, add B. Example: DEM9SLNMB For shells with 50 microinches gold, add K52. Example: DEM9SLNMK52 Engaging Face DD Configuration A 2,84 (.112) 5,68 (.224) C B E 4,01 0,69 (.158 .027) D 7,18 0,25 (.283 .010) 10 O 0,76 (.030) 4,01 0,69 (.158 .027) 2,84 (.112) O 3,05 (.120) M L N F 7,18 0,25 (.283 .010) W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) M 0,25 (.010) 12,30 (.484) 12,30 (.484) 12,30 (.484) 12,30 (.484) 15,09 (.594) N 0,13 (.005) 8,64 (.340) 8,64 (.340) 8,64 (.340) 8,64 (.340) 10,04 (.395) Dimensions are shown in mm (inch) Dimensions subject to change 175 D Subminiature Space/High Reliability 90 Solder Contact PCB Connector -- European Footprint Plug Part Numbers Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 Through Hole DEM9PNM*1AON DAM15PNM*1AON DBM25PNM*1AON DCM37PNM*1AON DDM50PNM*1AON Dual Float Mount DEMY9PNM*1AON DAMY15PNM*1AON DBMY25PNM*1AON DCMY37PNM*1AON DDMY50PNM*1AON Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1AON For shells with 50 microinches gold, add K52. DEM9PNM1AONK52 Engaging Face DD Configuration 2,54 (.100) A 5,00 (.197) 5,08 (.200) C B O 3,05 (.120) 9,40 0,20 (.370 .008) D E K L 10 O 0,60 (.024) 2,54 (.100) 5,00 (.197) 9,40 0,20 (.370 .008) F W Dimensions Shell Size DE DA DB DC DD 176 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability 90 Solder Contact PCB Connector -- European Footprint Part Numbers Receptacle Shell Size DE DA DB DC DD Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Layout 9 15 25 37 50 Through Hole DEM9SNM*1AON DAM15SNM*1AON DBM25SNM*1AON DCM37SNM*1AON DDM50SNM*1AON Dual Float Mount DEMY9SNM*1AON DAMY15SNM*1AON DBMY25SNM*1AON DCMY37SNM*1AON DDMY50SNM*1AON Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1AON For shells with 50 microinches gold, add K52. Example: DEM9SNM1AONK52 Engaging Face DD Configuration 2,54 (.100) A C O 3,05 (.120) B 9,40 0,20 (.370 .008) D E 5,00 (.197) 5,08 (.200) K L 10 O 0,60 (.024) 5,00 (.197) 2,54 (.100) 9,40 0,20 (.370 .008) F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 177 D Subminiature Space/High Reliability 90 Solder Termination (Machined) with Metal Bracket -- European Footprint 10,2 or 9,4 mm Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Shell Size DE DA DB DC DD Metal Bracket Threaded Insert #4-40 DEM9PNM*1A7N DAM15PNM*1A7N DBM25PNM*1A7N DCM37PNM*1A7N DDM50PNM*1A7N Layout 9 15 25 37 50 Metal Bracket Threaded Insert M3 DEM9PNM*1A9N DAM15PNM*1A9N DBM25PNM*1A9N DCM37PNM*1A9N DDM50PNM*1A9N Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1A7N For shells with 50 microinches gold, add K52. Example: DEM9PNM1A7NK52 Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D 9,40 (.370) L 1,00 (.039) 10 O 0,60 (.024) 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0.38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0.25 (.010) 10,72 (.422) 10,72 (.422) 10,82 (.426) 10,82 (.426) 10,82 (.426) W 0,368 (.0145) 6,693 (.2635) 6,693 (.2635) -- -- -- W 0,41 (.016) -- -- 6,84 (.269) 6,84 (.269) 6,84 (.269) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) N 0,15 (.006) 10,7 (.42) 10,7 (.42) 10,7 (.42) 10,7 (.42) 12,1 (.48) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. 178 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability 90 Solder Termination (Machined) with Metal Bracket -- European Footprint 10,2 or 9,4 mm Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For P.C. hole patterns, see page 273. For panel cutouts, see page 221. For hardware views (European), see page 227. Shell Size DE DA DB DC DD Metal Bracket Threaded Insert #4-40 DEM9SNM*1A7N DAM15SNM*1A7N DBM25SNM*1A7N DCM37SNM*1A7N DDM50SNM*1A7N Layout 9 15 25 37 50 Metal Bracket Threaded Insert M3 DEM9SNM*1A9N DAM15SNM*1A9N DBM25SNM*1A9N DCM37SNM*1A9N DDM50SNM*1A9N Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1A7N For shells with 50 microinches gold, add K52. Example: DEM9SNM1A7NK52 Engaging Face DD Configuration 2,54 (.100) A 3,70 (.146) 5,08 (.200) C B E D L 9,40 (.370) 1,00 (.039) 10 O 0,60 (.024) 3,70 (.146) 2,54 (.100) W 9,40 (.370) F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) N 0,15 (.006) 10,7 (.42) 10,7 (.42) 10,7 (.42) 10,7 (.42) 12,1 (.48) Connector footprint measured from the front shell. Connector footprint measured from the rear shell. Dimensions are shown in mm (inch) Dimensions subject to change 179 D Subminiature Space/High Reliability Solder Cup Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMY9PNM* DAMY15PNM * DBMY25PNM * DCMY37PNM * DDMY50PNM * Through Hole DEM9PNM* DAM15PNM * DBM25PNM * DCM37PNM * DDM50PNM * Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB For shells with 50 microinches gold, add K52. Example: DEM9PNMK52 Engaging Face DD Configuration 5,69 (.224) A C O 3,05 (.120) B 2,84 (.112) K E D L 10 10,72 (.422) MAX 2,84 (.112) F W Dimensions Shell Size DE DA DB DC DD 180 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0.76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Solder Cup Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMY9SNM* DAMY15SNM* DBMY25SNM* DCMY37SNM* DDMY50SNM* Through Hole DEM9SNM* DAM15SNM* DBM25SNM* DCM37SNM* DDM50SNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB For shells with 50 microinches gold, add K52. Example: DEM9SNMK52 Engaging Face DD Configuration 5,69 (.224) A C 2,84 (.112) O 3,05 (.120) B K E D L 10 2,84 (.112) 9,91 (.390) MAX F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 181 D Subminiature Space/High Reliability D*MA Standard Density Crimp Contact Cable Connector Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMAY9PNM* DAMAY15PNM* DBMAY25PNM* DCMAY37PNM* DDMAY50PNM* Through Hole DEMA9PNM* DAMA15PNM* DBMA25PNM* DCMA37PNM* DDMA50PNM* Notes: *For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9PNMB For shells with 50 microinches gold, add K52. Example: DEMA9PNMK52 For connectors without contacts, add F0. Example: DEMA9PNMF0 (F0 not marked on the connector) For crimp (Size 20) contacts and tooling, see pages 187 & 275 Engaging Face A C O 3,05 (.120) B D E 10 K 8,76 (.345) MAX L Dimensions Shell Size DE DA DB DC DD 182 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) W F F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability D*MA Standard Density Crimp Contact Cable Connector Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 224. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Dual Float Mount DEMAY9SNM* DAMAY15SNM* DBMAY25SNM* DCMAY37SNM* DDMAY50SNM* Through Hole DEMA9SNM* DAMA15SNM* DBMA25SNM* DCMA37SNM* DDMA50SNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9SNMB For shells with 50 microinches gold, add K52. Example: DEMA9SNMK52 For connectors without contacts, add F0. Example: DEMA9SNMF0 (F0 not marked on the connector) For crimp (Size 20) contacts and tooling, see pages 187 & 275. Engaging Face A C O 3,05 (.120) B D E 10 8,76 (.345) MAX K L W F Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 183 D Subminiature Space/High Reliability D*MA High Density Crimp Contact Cable Connector Plug Part Numbers Reader's Resource For contact cavity arrangements, see page 186. For panel cutouts, see page 221. For hardware views (Standard) see page 226. Shell Size DE DA DB DC DD Layout 15 26 44 62 78 Dual Float Mount DEMAY15PNM* DAMAY26PNM* DBMAY44PNM* DCMAY62PNM* DDMAY78PNM* Through Hole DEMA15PNM* DAMA26PNM* DBMA44PNM* DCMA62PNM* DDMA78PNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15PNMB For shells with 50 microinches gold, add K52. Example: DEMA15PNMK52 For connectors without contacts, add F0. Example: DEMA15PNMF0 (F0 not marked on connector) For crimp (Size 22) contacts and tooling, see pages 187 & 275 Engaging Face A C O 3,05 (.120) 10 B E D K 8,76 (.345) MAX F W L Dimensions Shell Size DE DA DB DC 184 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability D*MA High Density Crimp Contact Cable Connector Part Numbers Receptacle Reader's Resource For contact cavity arrangements, see page 186. For panel cutouts, see page 221. For hardware views (Standard) see page 226. Shell Size DE DA DB DC DD Layout 15 26 44 62 78 Dual Float Mount DEMAY15SNM* DAMAY26SNM* DBMAY44SNM* DCMAY62SNM* DDMAY78SNM* Through Hole DEMA15SNM* DAMA26SNM* DBMA44SNM* DCMA62SNM* DDMA78SNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15SNMB For shells with 50 microinches gold, add K52. Example: DEMA15SNMK52 For connectors without contacts, add F0. Example: DEMA15SNMF0 (F0 not marked on the connector) For crimp (Size 22) contacts and tooling, see pages 187 & 275 Engaging Face A C O 3,05 (.120) B 10 E D 8,76 (.345) MAX K F W L Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change 185 D Subminiature Space/High Reliability Plug Contact Cavity Arrangements -- High Density Face View Pin Insert 1 5 1 10 6 11 Shell Size Contact Arrangement Contact Size 15 1 9 10 19 30 31 26 E 15 #22 15 16 18 44 A 26 #22 B 44 #22 1 20 21 39 21 1 22 42 43 40 62 Shell Size Contact Arrangement Contact Size 59 60 78 C 62 #22 D 78 #22 Receptacle Contact Cavity Arrangements -- High Density Face View Socket Insert 5 10 26 11 E 15 #22 15 1 18 6 15 Shell Size Contact Arrangement Contact Size 9 1 10 1 30 16 44 19 31 A 26 #22 B 44 #22 20 21 1 42 22 62 Shell Size Contact Arrangement Contact Size 186 43 C 62 #22 1 39 21 59 40 78 60 D 78 #22 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Crimp Contacts Pin Contact Size 20 20-18 20-26 22D Wire Size AWG 20, 22, 24 1 #18, 20 or 2 #20 26, 28, 30 22, 24, 26, 28 Pin Part Number 030-8882-002 330-8782-001 030-8848-020 330-8944-001 Contact Size 20 20-18 20-26 22D Wire Size AWG 20, 22, 24 1 #18, 20 or 2 #20 26, 28, 30 22, 24, 26, 28 Socket Part Number 031-8944-000 031-8843-001 031-8787-020 031-8902-001 22D High Power Wire Size AWG 20, 22, 24 26, 28, 30 1 #18 2 #22 22, 24, 26, 28 12, 16 Plastic Insertion/Extraction Part Number Description 980-2000-426 CIET-20HD 980-2000-426 CIET-20HD -- -- -- -- 274-7048-000 CIET-22D 274-7003-000 CIET-12 Plastic Extraction Part Number Description 323-7010-000 CET-20-11 323-7010-000 CET-20-11 274-5016-002 CET-20-15 274-5016-002 CET-20-15 -- -- -- -- Contact Size Wire Size AWG 20 20, 22, 24 2026 26, 28, 30 1 #18 2 #22 22, 24, 26, 28 Crimp Tool Part Number Description 995-0001-584 M22520/2-01 995-0001-585 M22520/1-01 995-0001-584 M22520/2-01 Part Number 995-0001-604 995-0001-244 995-0001-325 Socket Insertion/Extraction Tools CIET-20HD Contact Size 20 2026 2018 Hand Crimp Tools M22520/2-01 2018 22D Locator Description M22520/2-08 TH25 L3198-20HD 995-0001-584 M22520/2-01 980-0005-722 K250 995-0001-584 M22520/2-01 995-0001-739 M22520/2-06 CBT-646 Vibra-Bowl Crimper CBT-646 The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. Machine Crimp Rate: 1300+ per hour Power Requirements: Electrical = 115 VAC, 60 Hz, 5 A Pneumatic = 85 psi, 2 cu. ft. per min. Products: D*MA Dimensions are shown in mm (inch) Dimensions subject to change 187 D Subminiature Space/High Reliability Solder Cup Part Numbers Plug Reader's Resource For contact cavity arrangements, see page 222. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Dual Float Mount DEMY5W1PNM* DAMY7W2PNM* DAMY11W1PNM* DAMY3W3PNM* DAMY3WK3PNM* DBMY5W5PNM* DBMY9W4PNM* DBMY13W3PNM* DBMY17W2PNM* DBMY21W1PNM* DCMY8W8PNM* DCMY13W6PNM* DCMY17W5PNM* DCMY21WA4PNM* DCMY25W3PNM* DCMY27W2PNM* DDMY24W7PNM* DDMY36W4PNM* DDMY43W2PNM* DDMY47W1PNM* Through Hole DEM5W1PNM* DAM7W2PNM* DAM11W1PNM* DAM3W3PNM* DAM3WK3PNM* DBMP5W5PNM* DBM9W4PNM* DBM13W3PNM* DBM17W2PNM* DBM21W1PNM* DCM8W8PNM* DCM13W6PNM* DCM17W5PNM* DCM21WA4PNM* DCM25W3PNM* DCM27W2PNM* DDM24W7PNM* DDM36W4PNM* DDM43W2PNM* DDM47W1PNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1PNMB For shells with 50 microinches gold, add K52. Example: DEM5W1PNMK52 Keyed DD Configuration Engaging Face 5,69 (.224) A C 2,84 (.112) O 3,05 (.120) B K D E L 10 10,72 (.422) MAX 2,84 (.112) F W Dimensions Shell Size DE DA DB DC DD 188 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) 52,81 (2.079) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 8,36 (.329) 8,36 (.329) 8,36 (.329) 8,36 (.329) 11,07 (.436) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F W W K K 0,25 (.010) 0,368 (.0145) 0,41 (.016) 0,317 (.0125) 0,25 (.010) 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,72 (.422) 6,693 (.2635) -- 1,206 (.0475) -- 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) 10,82 (.426) -- 6,84 (.269) -- 1,52 (.060) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,99 (.039) 0,99 (.039) 0,99 (.039) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Solder Cup Receptacle Part Numbers Reader's Resource For contact cavity arrangements, see page 223. For panel cutouts, see page 221. For hardware views (Standard), see page 226. Shell Size DE DA DA DA DA DB DB DB DB DB DC DC DC DC DC DC DD DD DD DD Layout 5W1 7W2 11W1 3W3 3WK3 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 47W1 Dual Float Mount DEMY5W1SNM* DAMY7W2SNM* DAMY11W1SNM* DAMY3W3SNM* DAMY3WK3SNM* DBMY5W5SNM* DBMY9W4SNM* DBMY13W3SNM* DBMY17W2SNM* DBMY21W1SNM* DCMY8W8SNM* DCMY13W6SNM* DCMY17W5SNM* DCMY21WA4SNM* DCMY25W3SNM* DCMY27W2SNM* DDMY24W7SNM* DDMY36W4SNM* DDMY43W2SNM* DDMY47W1SNM* Through Hole DEM5W1SNM* DAM7W2SNM* DAM11W1SNM* DAM3W3SNM* DAM3WK3SNM* DBM5W5SNM* DBM9W4SNM* DBM13W3SNM* DBM17W2SNM* DBM21W1SNM* DCM8W8SNM* DCM13W6SNM* DCM17W5SNM* DCM21WA4SNM* DCM25W3SNM* DCM27W2SNM* DDM24W7SNM* DDM36W4SNM* DDM43W2SNM* DDM47W1SNM* Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1SNMB For shells with 50 microinches gold, add K52. Example: DEM5W1SNMK52 Keyed Engaging Face DD Configuration 5,69 (.224) A 2,84 (.112) C O 3,05 (.120) B K E D L 10 2,84 (.112) 9,91 (.390) MAX F W Dimensions Shell Size DE DA DB DC DD A 0,38 (.015) 30,81 (1.123) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) 66,93 (2.635) B 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) 54,84 (2.159) 52,42 (2.064) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 7,90 (.311) 7,90 (.311) 7,90 (.311) 7,90 (.311) 10,74 (.423) E 0,38 (.015) 12,55 (.494) 12,55 (.494) 12,55 (.494) 12,55 (.494) 15,37 (.605) F 0,25 (.010) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) 10,90 (.429) W 0,38 (.015) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) 6,94 (.273) K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) L 0,25 (.010) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 189 D Subminiature Space/High Reliability Cable (Size 8) Loose Contacts -- Coaxial 50 Ohm -- Straight Straight Crimp Braid Plug Receptacle Note: Dimensions include outer sleeve Description Plug Part Number 50 in. Gold Over Copper DM53740-36 A max. 18,80 (.739) B max. 24,00 (.945) D min. 1,70 (.067) Receptacle DM53742-37 18,80 (.739) 24,00 (.945) 1,70 (.067) RG Cable Number Old 187/U 188/U 187/U 188/U New 179B/U 316B/U 179B/U 316B/U Staight Solder Braid Plug 190 Receptacle Description Plug Part Number 50 in. Gold Over Copper DM53740-5147 A max. 18,80 (.739) B max. 24,00 (.945) D min. 1,70 (.067) Receptacle DM53742-5127 18,80 (.739) 24,00 (.945) 1,70 (.067) RG Cable Number Old 187/U 188/U 187/U 188/U New 179B/U 316B/U 179B/U 316B/U Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Cable (Size 8) Loose Contacts -- High Power -- Solder Plug Part Number 50 in. Gold Over Copper Non-Magnetic DM53745-72 DM53745-77 DM53745-70 Part Number 50 in. Gold Over Copper Non-Magnetic (European) DM115224-1040A DM115224-1020A DM115224-1010A Part Number 50 in. Gold DM53745-28 DM53745-27 DM53745-25 Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Part Number 50 in. Gold Over Copper Non-Magnetic DM53744-62 DM53744-64 DM53744-63 Part Number 50 in. Gold Over Copper Non-Magnetic (European) DM115224-2040A DM115224-2020A DM115224-2010A Part Number 50 in. Gold DM53744-21 DM53744-25 DM53744-24 Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Receptacle Cable (Size 8) Loose Contacts -- High Power -- Crimp Plug Part Number 50 in. Gold Over Copper Non-Magnetic DM115224-3040 DM115224-3020 DM115224-3010 Recommended Wire Trim Length Part Number 50 in. Gold DM130338-1 DM130339-1 DM130340-1 XA max. 4,60 (.181) 2,54 (.100) 1,07 (.067) XB max. 5,84 (.230) 5,54 (.218) 2,59 (.102) Receptacle Part Number 50 in. Gold Over Copper Non-Magnetic (European) DM115224-3040A DM115224-3020A DM115224-3010A XA min. 4,20 (.165) 3,25 (.128) 2,50 (.098) 20,93 - 20,42 (.824 - .804) XB max. 5,80 (.228) 4,70 (.185) 3,80 (.150) Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Recommended Wire Trim Length OB OA Part Number 50 in. Gold Over Copper Non-Magnetic DM115224-4040 DM115224-4020 DM115224-4010 Part Number 50 in. Gold DM13041-1 DM13042-1 DM13043-1 XA max. 4,60 (.181) 2,54 (.100) 1,07 (.067) XB max. 5,84 (.230) 5,54 (.218) 2,59 (.102) Part Number 50 in. Gold Over Copper Non-Magnetic (European) DM115224-4040A DM115224-4020A DM115224-4010A XA min. 4,20 (.165) 3,25 (.128) 2,50 (.098) XB max. 5,80 (.228) 4,70 (.185) 3,80 (.150) Current Rating 40 A 20 A 10 A Wire Size 8 AWG 12 AWG 16 AWG Crimp High Power Tooling M300-BT Wire Size 8 AWG 10 AWG 12 AWG Crimp Tool M300-BT M300-BT M300-BT Crimp Tool/Locator Tool Setting Number Tool Setting Number Standard Contacts European Contacts 6 6 5 2 1 1 Locator TP968 TP968 TP968 Dimensions are shown in mm (inch) Dimensions subject to change 191 D Subminiature Space/High Reliability Metal Backshell Metal Backshells provide strain relief. Various profiles available for different cable routing requirements. Materials and Finishes Material: Finish: Brass 50 in. Gold over Copper Product Features Qualified to MIL-Spec M85049 Deep Straight Clamp 2X O 3,45 (.136) E CABLE ENTRY H MAX G B 0,38 ,013 (.015 .005) D MAX C A F CABLE ENTRY Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number Non-Magnetic DE24657-16 DA24658-15 DB24659-15 DC24660-16 DD24661-13 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,572 (.0225) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 15,253 (.6005) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 14,68 (.578) 14,68 (.578) 14,68 (.578) 14,68 (.578) 17,45 (.687) E 0,38 (.015) 9,53 (.375) 18,11 (.713) 25,40 (1.000) 34,93 (1.375) 35,71 (1.406) F 0,38 (.015) 9,53 (.375) 7,93 (.312) 7,93 (.312) 7,93 (.312) 10,31 (.406) G 0,38 (.015) 19,05 (.750) 19,05 (.750) 25,40 (1.000) 25,40 (1.000) 28,57 (1.125) H max. 31,75 (1.250) 31,75 (1.250) 39,70 (1.563) 39,70 (1.563) 42,88 (1.688) Round Cable Clamp A C E 2X O 3,05 (.120) G F O D MAX CABLE ENTRY B 0,38 0,13 (.015 .005) Kit consists of 1 shell, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD 192 Layout 9 15 25 37 50 Part Number Non-Magnetic DE44994-2 DA20961-16 DB20962-18 DC20963-17 DD20964-19 A 0,38 (.015) 30,68 (1.208) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 24,99 (.984) 33,33 (1.312 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) XD max. 10,31 (.406) 10,31 (.406) 15,06 (.593) 18,23 (.718) 20,62 (.812) E 0,38 (.015) 16,79 (.661) 24,99 (.984) 38,48 (1.515) 55,14 (2.171) 53,16 (2.093) F 0,38 (.015) 3,18 (.125) 3,18 (.125) 4,75 (.187) 6,35 (.250) 7,92 (.312) G 0,76 (.030) 26,18 (1.031) 26,18 (1.031) 26,98 (1.062) 26,98 (1.062) 26,98 (1.062) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability Short Straight Clamp 2X O 3,05 (.120) A C G 12,30 0,38 (.484 .015) B Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts Shell Size DA DB DC DD Layout 15 25 37 50 0,38 0,13 (.015 .005) F E CABLE ENTRY Part Number Non-Magnetic DA19678-167 DB19678-168 DC19678-138 DD19678-161 No. of Cable Locking Screws Included 2 2 3 3 A 0,38 (.015) 38,88 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 7,51 (.296) 7,51 (.296) 7,51 (.296) 9,91 (.390) F 0,38 (.015) 7,93 (.312) 20,22 (.796) 17,45 (.687) 17,45 (.687) G 0,89 (.035) 16,36 (.644) 16,36 (.644) 16,36 (.644) 17,63 (.694) 90 Entry 2X MOUNTING HOLES #4-40 UNC-2B THD A E CABLE ENTRY B Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) 2,77 0,25 (.109 .010) C F CABLE ENTRY G H Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number Non-Magnetic DE19977-47 DA19977-40 DB19977-43 DC19977-45 DD19977-44 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,76 (.030) 18,24 (.718) 18,24 (.718) 24,58 (.968) 30,15 (1.187) 31,75 (1.250) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,76 (.030) 11,10 (.437) 11,10 (.437) 11,10 (.437) 11,10 (.437) 14,28 (.562) F 0,76 (.030) 11,10 (.437) 11,10 (.437) 15,88 (.625) 20,63 (.812) 23,01 (.906) G 0,76 (.030) 11,89 (.468) 11,89 (.468) 11,89 (.468) 11,89 (.468) 13,49 (.531) H 0,76 (.030) 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 8,71 (.343) Dimensions are shown in mm (inch) Dimensions subject to change 193 D Subminiature Space/High Reliability Screw Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Front Panel Mount Rear Panel Mount Product Features Ensures positive mating Provides locking and latching for high vibration applications D SUBMINIATURE CONNECTOR PIN OR SOCKET SCREW CLIP WITH THD MOUNTING PANEL NUT WASHER D SUBMINIATURE CONNECTOR PIN OR SOCKET LOCK WASHER HEX NUT Female Screw Lock Front Panel Mount Rear Panel Mount 4,78 0,38 (.188 .015) HEX (ACROSS FLATS) 4,78 0,38 (.188 .015) Kit consists of 1 nut, 3 washers, 1 lock washer, 1 hex nut Order 2 per connector 6,35 (.250) APPROX REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (.060) MAX PANEL #4-40 UNC-2B THD A REAR FLANGE (REF) #4-40 UNC-2A THD NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Part Number Non-Magnetic Brass Gold Finish D20418-52 -- D20418-70 D20418-101 A 0,38 (.015) 7,92 (.312) 12,70 (.500) 14,50 (.571) 15,88 (.625) Male Screw Lock SCREW #4-40 UNC-2A THD A B C CLIP GAP Kit consists of 1 screw and 1 clip Order 2 per connector Material: Finish: 194 Copper Alloy Gold over Copper Shell Size DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DD DD DD DD Part Number D20419-74 D20419-48 D20419-73 D20419-84 D20420-67 D20420-49 D20420-63 D20420-88 CLIP A 0,38 (.015) 14,10 (.555) 14,10 (.555) 14,10 (.555) 14,10 (.555) 16,66 (.656) 16,66 (.656) 16,66 (.656) 16,66 (.656) B 0,25 (.010) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 6,35 (.250) 7,14 (.281) 7,92 (.312) C 0,13 (.005) 1,22 (.048) 1,70 (.067) 1,70 (.067) 2,34 (.092) 1,22 (.048) 1,70 (.067) 1,22 (.048) 2,34 (.092) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability NASA/GSFC Cross Reference NASA/GSFC Part Number GO8P1 GO8S1 S-311-P-4/6GCP1 S-311-P-4/6GCP2 S-311-P-4/6GCP3 S-311-P-4/6GCP4 S-311-P-4/6GCRP1 S-311-P-4/6GCRP2 S-311-P-4/6GCRP3 S-311-P-4/6GCRP4 S-311-P-4/6GCRS1 S-311-P-4/6GCRS2 S-311-P-4/6GCRS3 S-311-P-4/6GCRS4 S-311-P-4/6GCS1 S-311-P-4/6GCS2 S-311-P-4/6GCS3 S-311-P-4/6GCS4 S-311-P-4/6GHP6 S-311-P-4/6GHRP6 S-311-P-4/6GHRS6 S-311-P-4/6GHS6 311P409-1P-B-12 311P409-1P-B-15 311P409-1S-B-12 311P409-1S-B-15 311P409-2P-B-12 311P409-2P-B-15 311P409-2S-B-12 311P409-2S-B-15 311P409-3P-B-12 311P409-3P-B-15 311P409-3S-B-12 311P409-3S-B-15 311P409-4P-B-12 311P409-4P-B-15 311P409-4S-B-12 311P409-4S-B-15 311P409-5P-B-12 311P409-5S-B-15 311P409-5S-B-12 311P409-5S-B-15 S-311-P-4/10G1OP1 S-311-P-4/10G1OS1 311-P-10-B-1S-B-15 311-P-10-B-4S-B-15 311-P-10-1P-B-12 311-P-10-1P-B-15 311-P-10-1P-C-12 311-P-10-1P-C-15 311-P-10-1S-B-12 311-P-10-1S-B-15 311-P-10-1S-C-12 311-P-10-1S-C-15 311-P-10-10P-B-12 311-P-10-10P-B-15 311-P-10-10P-C-12 311-P-10-10P-C-15 311-P-10-10S-B-12 311-P-10-10S-B-15 311-P-10-10S-C-12 311-P-10-10S-C-15 311-P-10-11P-B-12 311-P-10-11P-C-15 311-P-10-11S-B-12 311-P-10-11S-C-15 311-P-10-12P-B-12 311-P-10-12P-B-15 311-P-10-12P-C-15 311-P-10-12S-B-12 ITT Cannon Part Number 030-2042-002 031-1147-002 DM53740-17 DM53740-15 DM53740-16 DM53740-18 DM53741-12 DM53741-11 DM53741-10 DM53741-13 DM53743-18 DM53743-16 DM53743-17 DM53743-19 DM53742-18 DM53742-16 DM53742-17 DM53742-19 DM51157-8 DM51157-5005 DM51155-5005 DM51155-7 DEMA9PNMBK47FO DEMAK9PNMBK47FO DEMA9SNMBK47FO DEMAK9SNMBK47FO DEMA15PNMBK47FO DEMAK15PNMBK47FO DEMA15SNMBK47FO DEMAK15SNMBK47FO DEMA25PNMBK47FO DEMAK25PNMBK47FO DEMA25SNMBK47FO DEMAK25SNMBK47FO DEMA37PNMBK47FO DEMAK37PNMBK47FO DEMA37SNMBK47FO DEMAK37SNMBK47FO DEMA50PNMBK47FO DEMAK50PNMBK47FO DEMA50SNMBK47FO DEMAK50PNMBK47FO 330-5291-081-02 031-1007-052-05 DEMB9S-NMB-76 DCMB37S-NMB-76 DEMPPNMB77 DEM-9P-NMB-76 DEM9PNMC77 DEM9PNMC76 DEM9SNMB77 DEM-9S-NMB-76 DEM-9S-NMC-77 DEM9SNMC76 DBM5W5PNMB77 DBM-5W5P-NMB-76 DBM-5W5P-NMC-77 DBM-5W5P-NMC-76 DBM-5W5S-NMB-77 DBM-5W5S-NMB-76 DBM-5W5S-NMC-77 DBM-5W5S-NMC-76 DBM-9W4P-NMB-77 DBM-9W4P-NMC-76 DBM-9W4S-NMB-77 DBM-9W4S-NMC-76 DBM13W3P-NMB-77 DBM-13W3P-NMB-76 DBM-13W3P-NMC-76 DBM-13W3S-NMB-77 NASA/GSFC Part Number 311-P-10-12S-B-15 311-P-10-12S-C-15 311-P-10-13P-B-12 311-P-10-13P-B-15 311-P-10-13P-C-12 311-P-10-13P-C-15 311-P-10-13S-B-12 311-P-10-13S-C-12 311-P-10-13S-C-15 311-P-10-14P-B-12 311-P-10-14P-B-15 311-P-10-14S-B-12 311-P-10-14S-B-15 311-P-10-14S-C-15 311-P-10-15P-B-12 311-P-10-15P-B-15 311-P-10-15P-C-12 311-P-10-15P-C-15 311-P-10-15S-B-12 311-P-10-15S-B-15 311-P-10-15S-C-12 311-P-10-15S-C-15 311-P-10-16P-B-12 311-P-10-16P-B-15 311-P-10-16P-C-12 311-P-10-16P-C-15 311-P-10-16S-B-12 311-P-10-16S-C-12 311-P-10-16S-C-15 311-P-10-17P-B-12 311-P-10-17P-B-15 311-P-10-17P-C-12 311-P-10-17P-C-15 311-P-10-17S-B-12 311-P-10-17S-B-15 311-P-10-17S-C-12 311-P-10-17S-C-15 311-P-10-18P-B-12 311-P-10-18P-B-12 311-P-10-18P-C-15 311-P-10-18S-B-12 311-P-10-18S-B-15 311-P-10-19P-B-12 311-P-10-19S-B-12 311-P-10-19S-C-15 311-P-10-2P-B-12 311-P-10-2P-B-15 311-P-10-2P-C-12 311-P-10-2P-C-15 311-P-10-2S-B-12 311-P-10-2S-B-15 311-P-10-2S-C-15 311-P-10-2S-C-15 311-P-10-20P-B-12 311-P-10-20P-C-15 311-P-10-20S-B-12 311-P-10-20S-C-12 311-P-10-20S-C-15 311-P-10-21P-C-15 311-P-10-21S-C-15 311-P-10-22P-B-12 311-P-10-22P-B-15 311-P-10-22P-C-15 311-P-10-22S-B-12 311-P-10-22S-B-15 311-P-10-22S-C-15 311-P-10-23P-B-12 311-P-10-23S-B-12 311-P-10-23S-B-15 311-P-10-23S-C-15 ITT Cannon Part Number DBM13W3S-NMB-76 DBM-13W3S-NMC-76 DBM17W2PNMB77 DBM-17W2P-NMB-76 DBM17W2P-NMC-77 DBM-17W2P-NMC-76 DBM17W2SNMB77 DBM-17W2S-NMC-77 DBM-17W2S-NMC-76 DBM-21W1P-NMB-77 DBM-21W1P-NMB-76 DBM-21W1S-NMB-77 DBM-21W1S-NMB-76 DBM-21W1S-NMC-76 DCM-8W8P-NMB-77 DCM8W8PNMB76 DCM-8W8P-NMC-77 DCM8W8PNMC76 DCM-8W8S-NMB-77 DCM8W8SNMB76 DCM-8W8S-NMC-77 DCM-8W8S-MNC-76 DCM-13W6P-NMB-77 DCM-13W6P-NMB-76 DCM-13W6P-NMC-77 DCM-13W6P-NMC-76 DCM-13W6S-NMB-77 DCM-13W6S-NMC-77 DCM13W6SNMC76 DCM17W5PNMB77 DCM-17W5P-NMB-76 DCM-17W5P-NMC-77 DCM-17W5P-NMC-76 DCM-17W5S-NMB-77 DCM17W5S-NMB-76 DCM-17W5S-NMC-77 DCM-17W5S-NMC-76 DCM-21WA4P-NMB-77 DCM21WA4P-NMB-76 DCM-21WA4P-NMC-76 DCM-21WA4S-NMB-77 DCM21WA4S-NMB-76 DCM-21W4P-NMB-77 DCM-21W4S-NMB-77 DCM21W4S-NMC-76 DAM15PNMB77 DAM15PNMB76 DAM15PNMC77 DAM15PNMC76 DAM15SNMB77 DAM-15S-NMB-76 DAM-15S-NMC-76 DAM-15S-NMC-76 DCM-25W3P-NMB-77 DCM25W3P-NMB-76 DCM-25W36-NMB-77 DCM-25W3S-NMC-77 DCM-25W3S-NMC-76 DCM27W2P-NMC-76 DCM-27W2S-NMC-76 DDM-24W7P-NMB-77 DDM24W7PNMB76 DDM-24W7P-NMC-76 DDM24W7SNMB77 DDM-24W7S-NMB-76 DDM-24W7S-NMC-76 DDM-36W4P-NMB-77 DDM-36W4S-NMB-77 DDM36W4SNMB76 DDM-36W4S-NMC-76 NASA/GSFC Part Number 311-P-10-24P-B-12 311-P-10-24S-C-12 311-P-10-24S-C-15 311-P-10-25P-C-15 311-P-10-25S-C-15 311-P-10-3S-B-12 311-P-10-3P-B-15 311-P-10-3P-C-12 311-P-10-3P-C-15 311-P-10-3S-B-12 311-P-10-3S-B-15 311-P-10-3S-C-12 311-P-10-3S-C-15 311-P-10-4P-B-12 311-P-10-4P-B-15 311-P-10-4P-C-12 311-P-10-4P-C-15 311-P-10-4S-B-12 311-P-10-4S-B-15 311-P-10-4S-C-12 311-P-10-4S-C-15 311-P-10-5P-B-12 311-P-10-5P-B-15 311-P-10-5P-C-12 311-P-10-5P-C-15 311-P-10-5S-B-12 311-P-10-5S-B-15 311-P-10-5S-C-12 311-P-10-5S-C-15 311-P-10-6P-B-12 311-P-10-6P-B-15 311-P-10-6P-C-15 311-P-10-6S-B-12 311-P-10-6P-C-15 311-P-10-7P-B-12 311-P-10-7P-B-15 311-P-10-7P-C-12 311-P-10-7P-C-15 311-P-10-7S-B-12 311-P-10-7S-B-15 311-P-10-7S-C-12 311-P-10-7S-C-15 311-P-10-8P-B-12 311-P-10-8P-B-15 311-P-10-8P-C-15 311-P-10-8S-B-12 311-P-10-8P-C-12 311-P-10-8P-C-15 311-P-10-9P-B-12 311-P-10-9P-B-15 311-P-10-9P-C-12 311-P-10-9P-C-15 311-P-10-9S-B-12 311-P-10-9S-B-15 311-P-10-9S-C-12 311-P-10-9S-C-15 311-P-10B-1S-B-12 311-P-10B-1S-C-12 311-P-10B-1S-C-15 311-P-10B-13S-B-15 311-P-10B-17S-B-15 311-P-10B-2S-B-12 311-P-10B-2S-C-12 311-P-10B-2S-C-15 311-P-10B-22S-B-15 311-P-10B-3S-B-12 311-P-10B-3S-B-15 311-P-10B-3S-C-12 311-P-10B-3S-C-15 311-P-10B-4S-B-12 ITT Cannon Part Number DDM43W2P-NMB-77 DDM-43W2S-NMB-77 DDM-43W2S-NMC-76 DDM47W1P-NMC-76 DDM-47W1S-NMC-76 DBM25PNMB77 DBM25PNMB76 DBM25PNMC77 DBM25PNMC76 DBM25PNMB77 DBM-25S-NMB-76 DBM-25S-NMC-77 DBM-25S-NMC-76 DCM37PNMB77 DCM37PNMB76 DCM-37P-NMC-77 DCM37PNMC76 DCM37SNMB77 DCM-37S-NMB-76 DCM-37S-NMC-77 DCM-37S-NMC-76 DDM50PNMB77 DDM50PNMB76 DDM-50P-NMC-77 DDM50PNMC76 DDM50SNMB77 DDM50SNMB76 DDM-50S-NMC-77 DDM-50S-NMC-76 DEM-5W1P-NMB-77 DEM-5W1P-NMB-76 DEM-5W1P-NMC-76 DEM-5W1S-NMB-77 DEM-5W1S-NMC-76 DAM3W3PNMC76 DAM-3W3P-NMB-76 DAM3W3P-NMC-77 DAM-3W3P-NMC-76 DAM3W3SNMB77 DAM3W3SNMB76 DAM3W3S-NMC-76 DAM-3W3S-NMC-76 DAM-7W2P-NMB-77 DAM-7W2P-NMB-76 DAM-7W2P-NMC-76 DAM-7W2S-NMB-77 DAM7W2S-NMC-77 DAM-7W2S-NMC-76 DAM-11W1P-NMB-77 DAM-11W1P-NMB-76 DAM-11W1P-NMC-77 DAM-11W1P-NMC-76 DAM-11W1S-NMB-77 DAM-11W1S-NMB-76 DAM-11W1S-NMC-77 DAM-11W1S-NMC-76 DEMB9SNMB77 DEMB-9S-NMC-77 DEMB9S-NMC-76 DBMB-17W2S-NMB-76 DCMB-17W5S-NMB-76 DAMB15SNMB77 DAMB-15S-NMC-77 DAMB15SNMC76 DDMB-247S-NMB-76 DBMB-25S-NMB-77 DBMB-25S-NMB-76 DBMB-25S-NMC-77 DBMB25SNMC76 DCMB-37S-NMB-77 Dimensions are shown in mm (inch) Dimensions subject to change 195 D Subminiature Space/High Reliability NASA/GSFC Cross Reference NASA/GSFC Part Number 311-P-10B-4S-C-12 311-P-10B-4S-C-15 311-P-10B-5S-B-12 311-P-10B-5S-B-15 ITT Cannon Part Number DCMB-37S-NMC-77 DCMB37S-NMC-76 DDMB-50S-NMB-77 DDMB50S-NMB-76 NASA/GSFC Part Number 311-P-10B-5S-C-12 311-P-10B-5S-C-15 311-P-10B-6S-B-15 311-P-10B-8S-B-12 ITT Cannon Part Number DDMB-50S-NMC-77 DDMB50S-NMC-76 DEMB-5W1S-NMB-76 DAMB-7W2S-NMB-77 NASA/GSFC Part Number 311-P-10B-8S-B-15 311-P-10B-9S-B-12 ITT Cannon Part Number DAMB-7W2S-NMB-76 DAMB-11W1S-NMB-77 ESA/SCC Cross Reference ESA-SCC Part Number 340100101B DEM5W1SNMB 340100101B DAM3W3SNMB 340100101B DAM7W2SNMB 340100101B DAM11W1SNMB 340100101B DBM5W5SNMB 340100101B DBM9W4SNMB 340100101B DBM13W3SNMB 340100101B DBM17W2SNMB 340100101B DBM21W1SNMB 340100101B DCM8W8SNMB 340100101B DCM13W6SNMB 340100101B DCM17W5SNMB 340100101B DCM21WA4SNMB 340100101B DCM25W3SNMB 340100101B DCM27W2SNMB 340100101B DDM24W7SNMB 340100101B DDM36W4SNMB 340100101B DDM43W2SNMB 340100101B DDM47W1SNMB 340100101B DEM5W1PNMB 340100101B DAM3W3PNMB 340100101B DAM7W2PNMB 340100101B DAM11W1PNMB 340100101B DBM5W5PNMB 340100101B DBM9W4PNMB 340100101B DBM13W3PNMB 340100101B DBM17W2PNMB 340100101B DBM21W1PNMB 340100101B DCM8W8PNMB 340100101B DCM13W6PNMB 340100101B DCM17W5PNMB 340100101B DCM21WA4PNMB 340100101B DCM25W3PNMB 340100101B DCM27W2PNMB 340100101B DDM24W7PNMB 340100101B DDM36W4PNMB 340100101B DDM43W2PNMB 340100101B DDM47W1PNMB 340100101B DEM5W1SOL3NMB 340100101B DAM7W2SOL3NMB 340100101B DAM11W1SOL3NMB 340100101B DBM9W4SOL3NMB 340100101B DBM13W3SOL3NMB 340100101B DBM17W2SOL3NMB 340100101B DBM21W1SOL3NMB 340100101B DCM13W6SOL3NMB 340100101B DCM17W5SOL3NMB 340100101B DCM21WA4SOL3NMB 340100101B DCM25W3SOL3NMB 340100101B DCM27W2OL3NMB 340100101B DDM24W7SOL3NMB 340100101B DDM36W4SOL3NMB 340100101B DDM43W2SOL3NMB 340100101B DDM47W1SOL3NMB 340100101B DEM5W1POL3NMB 340100101B DAM3W3POL3NMB 340100101B DAM7W2POL3NMB 340100101B DAM11W1POL3NMB 340100101B DBM9W4POL3NMB 340100101B DBM13W3POL3NMB 196 ITT Cannon Part Number DEM5W1SNMBK52 DAM3W3SNMBK52 DAM7W2SNMBK52 DAM11W1SNMBK52 DBM5W5SNMBK52 DBM9W4SNMBK52 DBM13W3SNMBK52 DBM17W2SNMBK52 DBM21W1SNMBK52 DCM8W8SNMBK52 DCM13W6SNMBK52 DCM17W5SNMBK52 DCM21WA4SNMBK52 DCM25W3SNMBK52 DCM27W2SNMBK52 DDM24W7SNMBK52 DDM36W4SNMBK52 DDM43W2SNMBK52 DDM47W1SNMBK52 DEM5W1PNMBK52 DAM3W3PNMBK52 DAM7W2PNMBK52 DAM11W1PNMBK52 DBM5W5PNMBK52 DBM9W4PNMBK52 DBM13W3PNMBK52 DBM17W2PNMBK52 DBM21W1PNMBK52 DCM8W8PNMBK52 DCM13W6PNMBK52 DCM17W5PNMBK52 DCM21WA4PNMBK52 DCM25W3PNMBK52 DCM27W2PNMBK52 DDM24W7PNMBK52 DDM36W4PNMBK52 DDM43W2PNMBK52 DDM47W1PNMBK52 DEM5W1SOL3NMBK52 DAM7W2SOL3NMBK52 DAM11W1SOL3NMBK52 DBM9W4SOL3NMBK52 DBM13W3SOL3NMBK52 DBM17W2SOL3NMBK52 DBM21W1SOL3NMBK52 DCM13W6SOL3NMBK52 DCM17W5SOL3NMBK52 DCM21WA4SOL3NMBK52 DCM25W3SOL3NMBK52 DCM27W2OL3NMBK52 DDM24W7SOL3NMBK52 DDM36W4SOL3NMBK52 DDM43W2SOL3NMBK52 DDM47W1SOL3NMBK52 DEM5W1POL3NMBK52 DAM3W3POL3NMBK52 DAM7W2POL3NMBK52 DAM11W1POL3NMBK52 DBM9W4POL3NMBK52 DBM13W3POL3NMBK52 ESA-SCC Part Number 340100101B DBM17W2POL3NMB 340100101B DBM21W1POL3NMB 340100101B DCM13W6POL3NMB 340100101B DCM17W5POL3NMB 340100101B DCM21WA4POL3NMB 340100101B DCM25W3POL3NMB 340100101B DCM27W2POL3NMB 340100101B DDM24W7POL3NMB 340100101B DDM36W4POL3NMB 340100101B DDM43W2POL3NMB 340100101B DDM47W1POL3NMB 340100101B DEM5W1S1A0NNMB 340100101B DAM7W2S1A0NNMB 340100101B DAM11W1S1A0NNMB 340100101B DBM9W4S1A0NNMB 340100101B DBM13W3S1A0NNMB 340100101B DBM17W2S1A0NNMB 340100101B DBM21W1S1A0NNMB 340100101B DCM13W6S1A0NNMB 340100101B DCM17W5S1A0NNMB 340100101B DCM21WA4S1A0NNMB 340100101B DCM25W3S1A0NNMB 340100101B DCM27W2S1A0NNMB 340100101B DDM24W7S1A0NNMB 340100101B DDM36W4S1A0NNMB 340100101B DDM43W2S1A0NNMB 340100101B DDM47W1S1A0NNMB 340100101B DEM5W1P1A0NNMB 340100101B DAM7W2P1A0NNMB 340100101B DAM11W1P1A0NNMB 340100101B DBM9W4P1A0NNMB 340100101B DBM13W3P1A0NNMB 340100101B DBM17W2P1A0NNMB 340100101B DBM21W1P1A0NNMB 340100101B DCM13W6P1A0NNMB 340100101B DCM17W5P1A0NNMB 340100101B DCM21WA4P1A0NNMB 340100101B DCM25W3P1A0NNMB 340100101B DCM27W2P1A0NNMB 340100101B DDM24W7P1A0NNMB 340100101B DDM36W4P1A0NNMB 340100101B DDM43W2P1A0NNMB 340100101B DDM47W1P1A0NNMB 340100101B DEM5W1S1A7NNMB 340100101B DAM7W2S1A7NNMB 340100101B DAM11W1S1A7NNMB 340100101B DBM9W4S1A7NNMB 340100101B DBM13W3S1A7NNMB 340100101B DBM17W2S1A7NNMB 340100101B DBM21W1S1A7NNMB 340100101B DCM13W6S1A7NNMB 340100101B DCM17W5S1A7NNMB 340100101B DCM21WA4S1A7NNMB 340100101B DCM25W3S1A7NNMB 340100101B DCM27W2S1A7NNMB 340100101B DDM24W7S1A7NNMB 340100101B DDM36W4S1A7NNMB 340100101B DDM43W2S1A7NNMB 340100101B DDM47W1S1A7NNMB 340100101B DEM5W1P1A7NNMB ITT Cannon Part Number DBM17W2POL3NMBK52 DBM21W1POL3NMBK52 DCM13W6POL3NMBK52 DCM17W5POL3NMBK52 DCM21WA4POL3NMBK52 DCM25W3POL3NMBK52 DCM27W2POL3NMBK52 DDM24W7POL3NMBK52 DDM36W4POL3NMBK52 DDM43W2POL3NMBK52 DDM47W1POL3NMBK52 DEM5W1S1A0NNMBK52 DAM7W2S1A0NNMBK52 DAM11W1S1A0NNMBK52 DBM9W4S1A0NNMBK52 DBM13W3S1A0NNMBK52 DBM17W2S1A0NNMBK52 DBM21W1S1A0NNMBK52 DCM13W6S1A0NNMBK52 DCM17W5S1A0NNMBK52 DCM21WA4S1A0NNMBK52 DCM25W3S1A0NNMBK52 DCM27W2S1A0NNMBK52 DDM24W7S1A0NNMBK52 DDM36W4S1A0NNMBK52 DDM43W2S1A0NNMBK52 DDM47W1S1A0NNMBK52 DEM5W1P1A0NNMBK52 DAM7W2P1A0NNMBK52 DAM11W1P1A0NNMBK52 DBM9W4P1A0NNMBK52 DBM13W3P1A0NNMBK52 DBM17W2P1A0NNMBK52 DBM21W1P1A0NNMBK52 DCM13W6P1A0NNMBK52 DCM17W5P1A0NNMBK52 DCM21WA4P1A0NNMBK52 DCM25W3P1A0NNMBK52 DCM27W2P1A0NNMBK52 DDM24W7P1A0NNMBK52 DDM36W4P1A0NNMBK52 DDM43W2P1A0NNMBK52 DDM47W1P1A0NNMBK52 DEM5W1S1A7NNMBK52 DAM7W2S1A7NNMBK52 DAM11W1S1A7NNMBK52 DBM9W4S1A7NNMBK52 DBM13W3S1A7NNMBK52 DBM17W2S1A7NNMBK52 DBM21W1S1A7NNMBK52 DCM13W6S1A7NNMBK52 DCM17W5S1A7NNMBK52 DCM21WA4S1A7NNMBK52 DCM25W3S1A7NNMBK52 DCM27W2S1A7NNMBK52 DDM24W7S1A7NNMBK52 DDM36W4S1A7NNMBK52 DDM43W2S1A7NNMBK52 DDM47W1S1A7NNMBK52 DEM5W1P1A7NNMBK52 ESA-SCC ITT Cannon Part Number Part Number 340100101B DAM7W2P1A7NNMB DAM7W2P1A7NNMBK52 340100101B DAM11W1P1A7NNMB DAM11W1P1A7NNMBK52 340100101B DBM9W4P1A7NNMB DBM9W4P1A7NNMBK52 340100101B DBM13W3P1A7NNMB DBM13W3P1A7NNMBK52 340100101B DBM17W2P1A7NNMB DBM17W2P1A7NNMBK52 340100101B DBM21W1P1A7NNMB DBM21W1P1A7NNMBK52 340100101B DCM13W6P1A7NNMB DCM13W6P1A7NNMBK52 340100101B DCM17W5P1A7NNMB DCM17W5P1A7NNMBK52 340100101B DCM21WA4P1A7NNMB DCM21WA4P1A7NNMBK52 340100101B DCM25W3P1A7NNMB DCM25W3P1A7NNMBK52 340100101B DCM27W2P1A7NNMB DCM27W2P1A7NNMBK52 340100101B DDM24W7P1A7NNMB DDM24W7P1A7NNMBK52 340100101B DDM36W4P1A7NNMB DDM36W4P1A7NNMBK52 340100101B DDM43W2P1A7NNMB DDM43W2P1A7NNMBK52 340100101B DDM47W1P1A7NNMB DDM47W1P1A7NNMBK52 340100101B DEM5W1S1A9NNMB DEM5W1S1A9NNMBK52 340100101B DAM7W2S1A9NNMB DAM7W2S1A9NNMBK52 340100101B DAM11W1S1A9NNMB DAM11W1S1A9NNMBK52 340100101B DBM9W4S1A9NNMB DBM9W4S1A9NNMBK52 340100101B DBM13W3S1A9NNMB DBM13W3S1A9NNMBK52 340100101B DBM17W2S1A9NNMB DBM17W2S1A9NNMBK52 340100101B DBM21W1S1A9NNMB DBM21W1S1A9NNMBK52 340100101B DCM13W6S1A9NNMB DCM13W6S1A9NNMBK52 340100101B DCM17W5S1A9NNMB DCM17W5S1A9NNMBK52 340100101B DCM21WA4S1A9NNMB DCM21WA4S1A9NNMBK52 340100101B DCM25W3S1A9NNMB DCM25W3S1A9NNMBK52 340100101B DCM27W2S1A9NNMB DCM27W2S1A9NNMBK52 340100101B DDM24W7S1A9NNMB DDM24W7S1A9NNMBK52 340100101B DDM36W4S1A9NNMB DDM36W4S1A9NNMBK52 340100101B DDM43W2S1A9NNMB DDM43W2S1A9NNMBK52 340100101B DDM47W1S1A9NNMB DDM47W1S1A9NNMBK52 340100101B DEM5W1P1A9NNMB DEM5W1P1A9NNMBK52 340100101B DAM7W2P1A9NNMB DAM7W2P1A9NNMBK52 340100101B DAM11W1P1A9NNMB DAM11W1P1A9NNMBK52 340100101B DBM9W4P1A9NNMB DBM9W4P1A9NNMBK52 340100101B DBM13W3P1A9NNMB DBM13W3P1A9NNMBK52 340100101B DBM17W2P1A9NNMB DBM17W2P1A9NNMBK52 340100101B DBM21W1P1A9NNMB DBM21W1P1A9NNMBK52 340100101B DCM13W6P1A9NNMB DCM13W6P1A9NNMBK52 340100101B DCM17W5P1A9NNMB DCM17W5P1A9NNMBK52 340100101B DCM21WA4P1A9NNMB DCM21WA4P1A9NNMBK52 340100101B DCM25W3P1A9NNMB DCM25W3P1A9NNMBK52 340100101B DCM27W2P1A9NNMB DCM27W2P1A9NNMBK52 340100101B DDM24W7P1A9NNMB DDM24W7P1A9NNMBK52 340100101B DDM36W4P1A9NNMB DDM36W4P1A9NNMBK52 340100101B DDM43W2P1A9NNMB DDM43W2P1A9NNMBK52 340100101B DDM47W1P1A9NNMB DDM47W1P1A9NNMBK52 340100101B DEM5W1SF179ANMB DEM5W1SF179ANMBK52 340100101B DAM7W2SF179ANMB DAM7W2SF179ANMBK52 340100101B DAM11W1SF179ANMB DAM11W1SF179ANMBK52 340100101B DBM9W4SF179ANMB DBM9W4SF179ANMBK52 340100101B DBM13W3SF179ANMB DBM13W3SF179ANMBK52 340100101B DBM17W2SF179ANMB DBM17W2SF179ANMBK52 340100101B DBM21W1SF179ANMB DBM21W1SF179ANMBK52 340100101B DCM13W6SF179ANMB DCM13W6SF179ANMBK52 340100101B DCM17W5SF179ANMB DCM17W5SF179ANMBK52 340100101B DCM21WA4SF179ANMBDCM21WA4SF179ANMBK52 340100101B DCM25W3SF179ANMB DCM25W3SF179ANMBK52 340100101B DCM27W2SF179ANMB DCM27W2SF179ANMBK52 340100101B DDM24W7SF179ANMB DDM24W7SF179ANMBK52 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Space/High Reliability ESA/SCC Cross Reference ESA-SCC ITT Cannon Part Number Part Number 340100101B DDM36W4SF179ANMB DDM36W4SF179ANMBK52 340100101B DDM43W2SF179ANMB DDM43W2SF179ANMBK52 340100101B DDM47W1SF179ANMB DDM47W1SF179ANMBK52 340100101B DEM5W1PF179ANMB DEM5W1PF179ANMBK52 340100101B DAM7W2PF179ANMB DAM7W2PF179ANMBK52 340100101B DAM11W1PF179ANMB DAM11W1PF179ANMBK52 340100101B DBM9W4PF179ANMB DBM9W4PF179ANMBK52 340100101B DBM13W3PF179ANMB DBM13W3PF179ANMBK52 340100101B DBM17W2PF179ANMB DBM17W2PF179ANMBK52 340100101B DBM21W1PF179ANMB DBM21W1PF179ANMBK52 340100101B DCM13W6PF179ANMB DCM13W6PF179ANMBK52 340100101B DCM17W5PF179ANMB DCM17W5PF179ANMBK52 340100101B DCM21WA4PF179ANMBDCM21WA4PF179ANMBK52 340100101B DCM25W3PF179ANMB DCM25W3PF179ANMBK52 340100101B DCM27W2PF179ANMB DCM27W2PF179ANMBK52 340100101B DDM24W7PF179ANMB DDM24W7PF179ANMBK52 340100101B DDM36W4PF179ANMB DDM36W4PF179ANMBK52 340100101B DDM43W2PF179ANMB DDM43W2PF179ANMBK52 340100101B DDM47W1PF179ANMB DDM47W1PF179ANMBK52 340100101B DEM9SNMB DEM9SNMBK52 340100101B DAM15SNMB DAM15SNMBK52 340100101B DBM25SNMB DBM25SNMBK52 340100101B DCM37SNMB DCM37SNMBK52 340100101B DDM50SNMB DDM50SNMBK52 340100101B DEM9PNMB DEM9PNMBK52 340100101B DAM15PNMB DAM15PNMBK52 340100101B DBM25PNMB DBM25PNMBK52 340100101B DCM37PNMB DCM37PNMBK52 340100101B DDM50PNMB DDM50PNMBK52 340100101B DEM9SOL3NMB DEM9SOL3NMBK52 340100101B DAM15SOL3NMB DAM15SOL3NMBK52 340100101B DBM25SOL3NMB DBM25SOL3NMBK52 340100101B DCM37SOL3NMB DCM37SOL3NMBK52 340100101B DDM50SOL3NMB DDM50SOL3NMBK52 340100101B DEM9POL3NMB DEM9POL3NMBK52 340100101B DAM15POL3NMB DAM15POL3NMBK52 340100101B DBM25POL3NMB DBM25POL3NMBK52 340100101B DCM37POL3NMB DCM37POL3NMBK52 340100101B DDM50POL3NMB DDM50POL3NMBK52 340100101B DEM9S1A0NNMB DEM9S1A0NNMBK52 340100101B DAM15S1A0NNMB DAM15S1A0NNMBK52 340100101B DBM25S1A0NNMB DBM25S1A0NNMBK52 340100101B DCM37S1A0NNMB DCM37S1A0NNMBK52 340100101B DDM50S1A0NNMB DDM50S1A0NNMBK52 340100101B DEM9P1A0NNMB DEM9P1A0NNMBK52 340100101B DAM15P1A0NNMB DAM15P1A0NNMBK52 340100101B DBM25P1A0NNMB DBM25P1A0NNMBK52 340100101B DCM37P1A0NNMB DCM37P1A0NNMBK52 340100101B DDM50P1A0NNMB DDM50P1A0NNMBK52 340100101B DEM9S1A7NNMB DEM9S1A7NNMBK52 340100101B DAM15S1A7NNMB DAM15S1A7NNMBK52 340100101B DBM25S1A7NNMB DBM25S1A7NNMBK52 340100101B DCM37S1A7NNMB DCM37S1A7NNMBK52 340100101B DDM50S1A7NNMB DDM50S1A7NNMBK52 340100101B DEM9P1A7NNMB DEM9P1A7NNMBK52 340100101B DAM15P1A7NNMB DAM15P1A7NNMBK52 340100101B DBM25P1A7NNMB DBM25P1A7NNMBK52 340100101B DCM37P1A7NNMB DCM37P1A7NNMBK52 340100101B DDM50P1A7NNMB DDM50P1A7NNMBK52 340100101B DEM9S1A9NNMB DEM9S1A9NNMBK52 ESA-SCC Part Number 340100101B DAM15S1A9NNMB 340100101B DBM25S1A9NNMB 340100101B DCM37S1A9NNMB 340100101B DDM50S1A9NNMB 340100101B DEM9P1A9NNMB 340100101B DAM15P1A9NNMB 340100101B DBM25P1A9NNMB 340100101B DCM37P1A9NNMB 340100101B DDM50P1A9NNMB 340100101B DEM9SF179ANMB 340100101B DAM15SF179ANMB 340100101B DBM25SF179ANMB 340100101B DCM37SF179ANMB 340100101B DDM50SF179ANMB 340100101B DEM9PF179ANMB 340100101B DAM15PF179ANMB 340100101B DBM25PF179ANMB 340100101B DCM37PF179ANMB 340100101B DDM50PF179ANMB 340100102B DEMA9SNMB 340100102B DAMA15SNMB 340100102B DBMA25SNMB 340100102B DCMA37SNMB 340100102B DDMA50SNMB 340100102B DEMA9PNMB 340100102B DAMA15PNMB 340100102B DBMA25PNMB 340100102B DCMA37PNMB 340100102B DDMA50PNMB 340102217B 340102218B 340102219B 340102220B 340102221B 340102222B 340102223B 340102224B 340104001B 340104003B 340104005B 340104002B 340104004B 340104006B 340104007B 340104008B 340104009B 340104010B 340104011B 340104012B 340100401B 340100405B 340100409B 340100402B 340100406B 340100410B 340100403B 340100407B 340100404B 340100408B 340100411B ITT Cannon Part Number DAM15S1A9NNMBK52 DBM25S1A9NNMBK52 DCM37S1A9NNMBK52 DDM50S1A9NNMBK52 DEM9P1A9NNMBK52 DAM15P1A9NNMBK52 DBM25P1A9NNMBK52 DCM37P1A9NNMBK52 DDM50P1A9NNMBK52 DEM9SF179ANMBK52 DAM15SF179ANMBK52 DBM25SF179ANMBK52 DCM37SF179ANMBK52 DDM50SF179ANMBK52 DEM9PF179ANMBK52 DAM15PF179ANMBK52 DBM25PF179ANMBK52 DCM37PF179ANMBK52 DDM50PF179ANMBK52 DEMA9SNMBK52 DAMA15SNMBK52 DBMA25SNMBK52 DCMA37SNMBK52 DDMA50SNMBK52 DEMA9PNMBK52 DAMA15PNMBK52 DBMA25PNMBK52 DCMA37PNMBK52 DDMA50PNMBK52 DA19678-174 DB19678-175 DC19678-173 DD19678-176 DA19678-157 DB19678-171 DC19678-162 DD19678-172 DM115224-1040A DM115224-1020A DM115224-1010A DM115224-2040A DM115224-2020A DM115224-2010A DM115224-3040A DM115224-4040A DM115224-3020A DM115224-4020A DM115224-3010A DM115224-4010A DM115740-5036 DM115740-5046 DM115740-5047 DM115742-5028 DM115742-5039 DM115742-5075 DM115741-5048 DM115741-5032 DM115743-5064 DM115743-5040 DM115740-19 ESA-SCC Part Number 340100415B 340100419B 340100412B 340100416B 340100420B 340100413B 340100417B 340100414B 340100418B 340102207B 340102208B 340102209B 340102210B 340102211B 340102212B 340102213B 340102214B 340102215B 340102216B 340102201B 340102206B 340102258B 340102202B 340102203B 340102204B 340102205B 340102244B 340102245B 340102246B 340102247B 340102225B 340102226B 340102227B 340102228B 340102239B 340102240B 340102241B 340102242B 340102243B 340102234B 340102235B 340102236B 340102237B 340102238B 340102229B 340102230B 340102231B 340102232B 340102233B 340100501B 340100502B 340100503B 340100504B 340100505B 340100506B 340100507B 340100508B ITT Cannon Part Number DM115740-13 DM115740-12 DM115742-15 DM115742-14 DM115742-13 DM115741-7 DM115741-8 DM115743-20 DM115743-22 DE-59-20 DE-60-20 DA-59-20 DA-60-20 DB-59-20 DB-60-20 DC-59-20 DC-60-20 DD-59-20 DD-60-20 D20418-52 D115418-70 D20418-101 D20419-74 D20419-48 D20420-67 D20420-49 D20419-73 D20419-84 D20420-63 D20420-88 DA19678-167 DB19678-168 DC19678-138 DD19678-161 DE19977-47 DA19977-40 DB19977-43 DC19977-45 DD19977-44 DE24657-16 DA24658-15 DB24659-15 DC24660-16 DD24661-13 DE115386-101A DA115386-104A DB115386-102A DC115386-100A DD115386-103A 030-8882-002 031-8944-000 030-8848-020 031-8787-020 330-8782-001 031-8843-001 330-8944-000 031-8902-000 Dimensions are shown in mm (inch) Dimensions subject to change 197 D Subminiature Accessories Selection Guide Backshell EMI Shielded EMI Shielded EMI Shielded Metal Metal Metal Metal Plastic Plastic Plastic Plastic Plastic Plastic Plastic Style Snap-Together Metalized Plastic Straight Exit see page 200 Snap-Together Metalized Plastic 40 Exit see page 200 Die Cast Zinc Metal see page 202 Deep Straight Clamp see page 203 Round Cable Clamp see page 203 Short Straight Clamp see page 204 90 Entry see page 204 Snap-Together Universal see page 205 One-Piece Snap-Together see page 205 One-Piece Plastic Straight Exit see page 206 One-Piece Plastic 90 Exit see page 206 Dataphone see page 206 Quick Disconnect for IDC Cable see page 207 Quick Disconnect for Round Cable -- Straight and 90 Exit see page 207 Locking Hardware Sliding Lock Retainer Assembly Slide Lock Post see page 210 see page 211 -- -- Female Screw Lock see page 209 -- Male Screw Lock see page 208 -- Spring Latch Plate see page 212 -- Spring Latch see page 212 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Supplied with backshell Optional, compatible locking hardware -- Not compatible 198 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Selection Guide Locking Hardware Locking Hook see page 207 -- Locking Spring see page 207 -- Jackscrew Assembly see page 213 -- Jackpost Assembly see page 213 -- Recessed Jackscrew see page 201 Extended Jackscrew see page 201 Thumbscrew see page 201 Jackpost for In-Line Connections see page 201 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Dimensions are shown in mm (inch) Dimensions subject to change 199 D Subminiature Accessories EMI Shielded Backshell Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Design includes integral strain relieving cable clamp. CABLE CLAMP CABLE GROUNDING TANG Product Features Improves conformance to FCC DOC #20780 shielding requirements No crimp ferrule tooling needed Quick and simple assembly using snaptogether design feature Attenuation Note: Cable grounding tang not available on DE size backshell. Specifications Attenuation: Temperature Range: Materials and Finishes -49dB @ 100 MHz -20 C to 80 C Material: Finish: Thermoplastic, UL 94V-0 rated Nickel over Copper Straight Exit C D OH MAX E A 16,990,30 (.669.012) B Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws Optional locking hardware sold separately, see page 201. Shell Part A Size Layout Number 0,15 (.006) DE 9 DE121073-154 24,95 (.982) DA 15 DA121073-150 33,30 (1.311) DB 25 DB121073-151 47,00 (1.850) DC 37 DC121073-152 63,45 (2.498) DD 50 DD121073-153 61,10 (2.410) B 0,30 (.012) 30,81 (1.213) 39,09 (1.539) 53,01 (2.087) 69,29 (2.728) 66,90 (2.634) 40 Exit C 0,30 (.012) 23,70 (.933) 31,80 (1.252) 45,01 (1.772) 60,30 (2.374) 58,30 (2.295) D 0,30 (.120) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) XH Max. 7,32 (.288) 8,31 (.327) 10,52 (.414) 12,32 (.485) 13,00 (.512) D E Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws Optional locking hardware sold separately, see page 201. 200 Shell Part Size Layout Number DE 9 DE121073-54 DA 15 DA121073-50 DB 25 DB121073-51 DC 37 DC121073-52 DD 50 DD121073-53 B 0,30 (.012) 35,99 (1.417) 44,29 (1.744) 57,99 (2.283) 74,50 (2.933) 72,97 (2.873) C 0,30 (.012) 22,00 (.866) 27,31 (1.075) 41,00 (1.614) 57,51 (2.264) 54,99 (2.165) D 0,30 (.012) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) Cable Diameter Min. Max. 3,51 (.138) 7,49 (.295) 6,50 (.256) 8,99 (.354) 6,50 (.256) 11,00 (.433) 6,50 (.256) 11,00 (.433) 8,99 (.354) 13,00 (.512) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories EMI Shielded Backshell Locking Hardware for Snap-Together EMI Shielded Backshell Recessed Jackscrew 4,50 (.177) O 4,50 (.177) Part Number: Material: Finish: Quantity Required per Connector: Extended Jackscrew 13,50(.531) 9,00 (.354) #4-40 THREADS 6,00 (.236) MIN 250-8501-004 Brass Nickel 2 Thumbscrew 19,00(.748) 4,30 9,00 (.354) (.169) O 4,10 (.161) Part Number: Material: Finish: Quantity Required per Connector: THREADS 6,00 (.236) MIN 250-8501-009 (M3) 250-8501-010 (#4-40) Brass Nickel Part Number: Material: Finish: Quantity Required per Connector: 250-8501-013 Brass Nickel 2 2 Jackpost for In-Line Connections Rectangular Nut Jackpost Assembly Jackpost 11,00 (.433) 6,00 (.236) #4-40 UNC-2B #4-40 UNC-2A 4,90 (.193) 3,00 (.118) MIN 5,00 (.197) (ACROSS FLATS) Assembly consists of 1 rectangular nut, 1 jackpost, 1 #4-40 lock washer. Part Number: Material: Finish: Quantity Required per Connector: D121073-19 Brass Nickel 2 Dimensions are shown in mm (inch) Dimensions subject to change 201 D Subminiature Accessories EMI Shielded Backshell Die Cast Zinc Metal Backshell Straight Exit 9 and 15 Position 25 Position 37 and 50 Position C C C B B B A A A D D D OE Product Features Improves conformance to FCC DOC #20780 shielding requirements No crimp ferrule tooling needed Kit consists of 1 front shell, 1 rear shell, 2 screws, 2 hex nuts, 2 mounting screws, 2 end brackets, 1 set of compression inserts (see this page) F F F Die cast metal backshells reduce EMI/RFI emissions. Die cast metal backshells offer improved shielding in a rugged package. OE OE Shell Part A Size Layout Number 0,13 (.005) DE 9 980-2000-345 31,12 (1.225) DA 15 980-2000-346 39,12 (1.540) DB 25 980-2000-347 53,09 (2.090) DC 37 980-2000-348 69,34 (2.730) DD 50 980-2000-349 66,70 (2.626) B 0,13 (.005) 37,21 (1.465) 40,64 (1.600) 39,37 (1.550) 45,72 (1.800) 45,72 (1.800) Specifications C 0,13 (.005) 15,75 (.620) 15,75 (.620) 17,53 (.690) 21,95 (.864) 21,95 (.864) XE 0,13 (.005) 10,16 (.400) 10,16 (.400) 13,34 (.525) 18,44 (.726) 18,44 (.726) D 0,13 (.005) 15,75 (.620) 15,75 (.620) 15,75 (.620) 15,75 (.620) 18,54 (.730) F 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,17 (1.857) 63,50 (2.500) 61,11 (2.406) Materials and Finishes Attenuation: Temperature Range: -50 dB @ 1000 MHz -20 C to 80 C Backshell Material: Backshell Finish: Compression Inserts: Hardware Material: Hardware Finish: Attenuation Diecast Shell Shielding Performance 0 Zinc Clear Zinc PVC Steel Clear Zinc -10 -20 -30 db -40 -50 -60 -70 100 1,000 Mhz Compression Inserts (Included With Die Cast Zinc Metal Backshell) Compression inserts accommodate a wide variety of cable sizes. Position 9, 15 25 37, 50 9 and 15 Position* 25 Position* 37 and 50 Position* 1 Cable Diameter .190/.350 .190/.460 .300/.680 1 2 6 2 3 5 3 5 4 3 2 1 4 4 5 * Inserts may be supplied mirror image #1 Position 9, 15 25 37, 50 202 O.D. 12,07 (.475) 15,24 (.600) 16,64 (.655) #2 I.D. 8,13 (.320) 11,43 (.450) 14,48 (.570) O.D. 9,14 (.360) 11,43 (.450) 17,78 (.700) #3 I.D. 8,00 (.315) 10,41 (.410) 15,75 (.620) O.D. 9,14 (.360) 11,43 (.450) 20,57 (.810) #4 I.D. 6,48 (.255) 9,40 (.370) 16,51 (.650) O.D. 9,14 (.360) 11,43 (.450) 16,64 (.655) #5 I.D. 7,24 (.285) 7,62 (.300) 12,70 (.500) O.D. 9,14 (.360) 11,43 (.450) 16,64 (.655) #6 I.D. 5,33 (.210) 5,84 (.230) 10,80 (.425) O.D. -- -- 16,64 (.655) I.D. -- -- 8,89 (.350) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Metal Backshell Metal Backshell Metal Backshells provide strain relief. Various profiles available for different cable routing requirements. Product Features Qualified to MIL-Spec M85049 Materials and Finishes Backshell Material: Finish: Low Carbon Steel Yellow Chromate over Cadmium Steel Hardware Material: Deep Straight Clamp 2X O 3,45 (.136) E CABLE ENTRY H MAX G 0,38 ,013 (.015 .005) D MAX B C A F CABLE ENTRY Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE24657 DA24658 DB24659 DC24660 DD24661 Mil Spec Part Number M85049/48-1-1 M85049/48-1-2 M85049/48-1-3 M85049/48-1-4 M85049/48-1-5 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,572 (.0225) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 12,484 (.4915) 15,253 (.6005) C 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 14,68 (.578) 14,68 (.578) 14,68 (.578) 14,68 (.578) 17,45 (.687) E 0,38 (.015) 9,53 (.375) 18,11 (.713) 25,40 (1.000) 34,93 (1.375) 35,71 (1.406) F 0,38 (.015) 9,53 (.375) 7,93 (.312) 7,93 (.312) 7,93 (.312) 10,31 (.406) G 0,38 (.015) 19,05 (.750) 19,05 (.750) 25,40 (1.000) 25,40 (1.000) 28,57 (1.125) H max. 31,75 (1.250) 31,75 (1.250) 39,70 (1.563) 39,70 (1.563) 42,88 (1.688) Round Cable Clamp A C E 2X O 3,05 (.120) G F O D MAX CABLE ENTRY B 0,38 0,13 (.015 .005) Kit consists of 1 shell, 2 screws, 2 hex nuts Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE44994 DA20961 DB20962 DC20963 DD20964 Mil Spec Part Number M85049/48-2-1 M85049/48-2-2 M85049/48-2-3 M85049/48-2-4 M85049/48-2-5 A 0,38 (.015) 30,68 (1.208) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) XD max. 10,31 (.406) 10,31 (.406) 15,06 (.593) 18,23 (.718) 20,62 (.812) E 0,38 (.015) 16,79 (.661) 24,99 (.984) 38,48 (1.515) 55,14 (2.171) 53,16 (2.093) F 0,38 (.015) 3,18 (.125) 3,18 (.125) 4,75 (.187) 6,35 (.250) 7,92 (.312) G 0,76 (.030) 26,18 (1.031) 26,18 (1.031) 26,98 (1.062) 26,98 (1.062) 26,98 (1.062) Dimensions are shown in mm (inch) Dimensions subject to change 203 D Subminiature Accessories Metal Backshell Short Straight Clamp 2X O 3,05 (.120) A C G 12,30 0,38 (.484 .015) B 0,38 0,13 (.015 .005) F Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts Shell Size DA DB DC DD Layout 15 25 37 50 Part Number DA19678-1 DB19678-2 DC19678-3 DD19678-4 Mil Spec Part Number M85049/48-3-2 M85049/48-3-3 M85049/48-3-4 M85049/48-3-5 E CABLE ENTRY No. of Cable Locking Screws Included 2 2 3 3 A 0,38 (.015) 38,88 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 7,51 (.296) 7,51 (.296) 7,51 (.296) 9,91 (.390) F 0,38 (.015) 7,93 (.312) 20,22 (.796) 17,45 (.687) 17,45 (.687) G 0,89 (.035) 16,36 (.644) 16,36 (.644) 16,36 (.644) 17,63 (.694) DE-9 is not available. 90 Entry E CABLE ENTRY 2X MOUNTING HOLES #4-40 UNC-2B THD A B 2,77 0,25 (.109 .010) Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) F CABLE ENTRY G C H Shell Size DE DA DB DC DD 204 Layout 9 15 25 37 50 Part Number DE19977-5 DA19977-1 DB19977-2 DC19977-3 DD19977-4 Mil Spec Part Number M85049/50-1 M85049/50-2 M85049/50-3 M85049/50-4 M85049/50-5 A 0,38 (.015) 30,56 (1.203) 38,89 (1.531) 52,78 (2.078) 69,04 (2.718) 66,68 (2.625) B 0,76 (.030) 18,24 (.718) 18,24 (.718) 24,58 (.968) 30,15 (1.187) 31,75 (1.250) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,76 (.030) 11,10 (.437) 11,10 (.437) 11,10 (.437) 11,10 (.437) 14,28 (.562) F 0,76 (.030) 11,10 (.437) 11,10 (.437) 15,88 (.625) 20,63 (.812) 23,01 (.906) G 0,76 (.030) 11,89 (.468) 11,89 (.468) 11,89 (.468) 11,89 (.468) 13,49 (.531) H 0,76 (.030) 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 8,71 (.343) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Plastic Backshell Plastic Backshell Snap-Together Universal O B MAX CABLE ENTRY 42,50 (1.673) 39,50 (1.555) C D A 2-piece snap-together design for quick assembly Customer furnishes tie-wrap Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Size DE DA DB DC DD Layout 9 15 25 37 50 XB max. 7,01 (.276) 9,60 (.378) 11,61 (.457) 13,00 (.512) 16,00 (.630) Part Number DE115339-20 DA115339-21 DB115339-22 DC115339-23 DD115339-24 C 0,20 (.008) 17,00 (.669) 17,00 (.669) 17,00 (.669) 17,00 (.669) 19,81 (.780) D 0,20 (.008) 19,51 (.768) 27,79 (1.094) 41,61 (1.638) 57,99 (2.283) 52,32 (2.060) One-Piece Snap-Together A C 16,21 (.638) 48,00 (1.890) E CLAMP, THERMOPLASTIC CLAMP, METAL Low cost Easy to assemble Mounting hardware included 2 thumbscrews, 2 cable clamps Materials and Finishes Backshell Material: Polypropylene Hardware Material: Steel Hardware Finish: Yellow chromate over zinc Shell Size DE DA DB Layout 9 15 25 Part Number DEBS-9 DABS-15 DBBS-25 O D MAX CABLE ENTRY A 35,20 (1.386) 43,31 (1.705) 57,20 (2.252) C 24,99 (.984) 33,33 (1.312) 47,04 (1.852) XD max. 5,69 (.224) 5,69 (.224) 6,50 (.256) E 27,51 (1.083) 31,19 (1.228) 38,30 (1.508) DC-37 and DD-50 are not available. Dimensions are shown in mm (inch) Dimensions subject to change 205 D Subminiature Accessories Plastic Backshell One-Piece Plastic Straight Exit G CABLE ENTRY B Kit consists of 1 shell, 1 cable clamp, 1 set screw Mounting hardware included 2 screws #4-24 x 5/16 long self-tapping Accommodates spring latches Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: Black Thermoplastic, UL 94V-2 rated Steel Yellow Chromate over Cadmium or Zinc C OE CABLE ENTRY A F CABLE ENTRY D Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51218 30,94 (1.218) 25,40 (1.000) DA 15 DA51210 39,27 (1.546) 25,40 (1.000) DB 25 DB51212 53,16 (2.093) 31,75 (1.250) DC 37 DC51214 69,44 (2.734) 38,10 (1.500) DD 50 DD51216 67,06 (2.640) 38,10 (1.500) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) 90 Exit D XE 0,38 (.015) 0,25 (.010) 12,70 (.500) 7,14 (.281) 12,70 (.500) 9,14 (.360) 12,70 (.500) -- 12,70 (.500) -- 15,47 (.609) -- K CABLE ENTRY OH CABLE ENTRY A B Kit consists of 1 shell, 1 cable clamp, 1 set screw Mounting hardware included 2 screws #4-24 x 5/16 long self-tapping Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: Black Thermoplastic, UL 94V-2 rated Steel Yellow Chromate over Cadmium or Zinc F G 0,25 (.010) 0,25 (.010) -- -- -- -- 12,52 (.493) 9,15 (.360) 17,63 (.694) 9,15 (.360) 18,64 (.734) 11,89 (.468) J CABLE ENTRY C D Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51219 37,95 (1.494) 25,40 (1.000) DA 15 DA51211 46,28 (1.822) 25,40 (1.000) DB 25 DB51213 60,15 (2.368) 31,75 (1.250) DC 37 DC51215 76,43 (3.009) 38,10 (1.500) DD 50 DD51217 74,04 (2.915) 38,10 (1.500) C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D XH 0,38 (.015) 0,25 (.010) 12,70 (.500) 7,14 (.281) 12,70 (.500) 9,14 (.360) 12,70 (.500) -- 12,70 (.500) -- 15,47 (.609) -- J K 0,25 (.010) 0,25 (.010) -- -- -- -- 12,52 (.493) 9,15 (.360) 17,63 (.694) 9,15 (.360) 18,64 (.734) 11,89 (.468) Dataphone 56,34 - 55,55 (2.218 - 2.187) 20,22 - 19,43 (.796 - .765) 45,72 - 45,21 (1.800 - 1.780) 36,09 - 35,31 (1.421 - 1.390) Available in 25 position only Mounting hardware included 2 screws #4-40 x 11/16 long Materials and Finishes Backshell Material: Hardware Material: Hardware Finish: 206 Black Thermoplastic, UL 94V-0 rated Steel Clear Chromate over Cadmium or Zinc 11,18 - 10,41 (.440 - .410) 3,81 - 3,56 (.150 - .140) Shell Size DB Layout 25 47,04(1.852) Part Number DB51226-1B # 4-40 THREADS Max. Cable Entry 7,92 (.312) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Plastic Backshell Quick Disconnect for IDC Cable IDC E CABLE ENTRY 2,60 0,20 (.102 .008) LOCKING SPRING* 40,54 (1.596) C Kit consists of 1 front shell, 1 rear shell, 2 strain reliefs, 5 screws 16,31 (.642) LOCKING HOOK* A * Order optional locking hardware separately. Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Size DE DA DB DC Part Number DE115386-1B DA115386-2B DB115386-3B DC115386-4B Layout 9 15 25 37 A max. 40,69 (1.602) 49,00 (1.929) 62,69 (2.468) 79,20 (3.118) C 0,13 (.005) 24,99 (.984) 33,30 (1.311) 47,04 (1.852) 63,50 (2.500) E 0,20 (.008) 14,99 (.590) 23,29 (.917) 36,98 (1.456) 53,49 (2.106) Quick Disconnect for Round Cable Straight and 90 Exit E CABLE ENTRY MIN 13,00 (.512) MAX LOCKING SPRING* B MAX 16,10 (.634) MAX 7,00 (.276) MAX C A MAX LOCKING HOOK* Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 1 spacer, 4 self-tapping screws, 2 machined screws Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated F CABLE ENTRY MIN D MAX * Order optional locking hardware separately. Shell Part Size Layout Number DE 9 DE115339 DA 15 DA115339-1 DB 25 DB115339-2 DC 37 DC115339-3 DD 50 DD115339-4 A max. 41,33 (1.627) 49,63 (1.954) 63,65 (2.506) 79,86 (3.144) 77,57 (3.054) B max. 32,41 (1.276) 32,41 (1.276) 40,44 (1.592) 42,42 (1.670) 42,42 (1.670) C 0,15 (.006) 25,00 (.984) 33,30 (1.311) 47,04 (1.852) 63,50 (2.500) 61,10 (2.406) D max. 16,51 (.650) 16,51 (.650) 16,51 (.650) 16,51 (.650) 19,51 (.768) E min. 7,70 (.303) 7,70 (.303) 7,70 (.303) 7,70 (.303) 10,69 (.421) F min. 6,70 (.264) 6,70 (.264) 17,70 (.697) 17,70 (.697) 17,70 (.697) Optional Locking Hardware/Mechanism Optional hardware provides quick disconnect for either flat IDC cable or round jacketed cable. Locking Hook Locking Spring Order 2 per connector Material: Corrosion-resistant steel Lock Hook Part Number 015-8755-000 015-8755-001 Lock Spring Part Number 259-8760-000 NOTE: Not for use on rear panel mounted connectors. Dimensions are shown in mm (inch) Dimensions subject to change 207 D Subminiature Accessories Locking Hardware Screw Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon backshells. Front Panel Mount Rear Panel Mount D SUBMINIATURE CONNECTOR PIN OR SOCKET Product Features Ensures positive mating Provides locking and latching for high vibration applications SCREW CLIP WITH THD MOUNTING PANEL NUT WASHER D SUBMINIATURE CONNECTOR PIN OR SOCKET LOCK WASHER HEX NUT Male Screw Lock SCREW #4-40 UNC-2A THD A B C CLIP GAP Kit consists of 1 screw and 1 clip Order 2 per connector Material: Finish: 208 Steel Yellow Chromate over Cadmium or Zinc Shell Size DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DD DD DD DD Part Number D20419 D20419-18 D20419-21 D20419-104 D20420 D20420-13 D20420-15 D20420-86 CLIP A 0,38 (.015) 14,10 (.555) 14,10 (.555) 14,10 (.555) 14,10 (.555) 16,66 (.656) 16,66 (.656) 16,66 (.656) 16,66 (.656) B 0,25 (.010) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) C 0,13 (.005) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Female Screw Lock Locking Hardware Front Panel Mount Rear Panel Mount 4,78 0,38 (.188 .015) HEX (ACROSS FLATS) 4,78 0,38 (.188 .015) 6,35 (.250) APPROX REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (.060) MAX PANEL #4-40 UNC-2B THD A REAR FLANGE (REF) #4-40 UNC-2A THD Kit consists of 1 nut, 3 washers, 1 lock washer, 1 hex nut Order 2 per connector Material: Steel NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Yellow Chromate over Cadmium D20418-2 D20418-50 D20418-39 D20418-74 Mil Spec Part Number M24308/26-1 -- M24308/26-2 -- Zinc With Clear Chromate D20418-80 -- -- -- Female Screw Lock for High Volume Applications 3,80 (.150) MIN FULL THD 5,36 O (.211) Steel Zinc 1,70 (.067) 6,48 - 6,30 (.255 - .248) 7,82 0,13 (.308 .005) NOTE: Not suitable for rear panel mounting. Part Number 980-2000-858 980-2000-859 Screw Locks for Connectors with Integral Threaded Inserts 3,02 O (.119) 6,35 O (.119) NOM Order 2 per connector Tool required for installation. See page 211. Material: Finish: A 0,38 (.015) 7,92 (.312) 12,70 (.500) 15,88 (.625) 19,05 (.750) Thread Code #4-40 M3 Jackpost 3,50 (.138) MIN THD A 5,75 (.226) Part Number D121073-39 D121073-40 D121073-41 D121073-42 5,50 (.217) Nominal Panel Thickness 1,09 - 0,91 (.043 - .036) 1,09 - 0,91 (.043 - .036) 5,00 (.197) HEX (ACROSS FLATS) THD B 4,50 (.177) MIN Thread Code THD A #4-40 UNC-2B M3 #4-40 UNC-2B M3 THD B #4-40 UNC-2A #4-40 UNC-2A M3 M3 Kit consists of 1 jackpost, 1 lock washer Order 2 per connector Material: Finish: Brass Nickel Dimensions are shown in mm (inch) Dimensions subject to change 209 D Subminiature Accessories Locking Hardware Slide Lock Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon backshells. #4-40 NUT, HEX Product Features Ensures positive mating Provides locking and latching for high vibration applications WASHER, LOCK PLATE, SLIDING LOCK MOUNTING SCREW #4-40 WASHER #4-40 POST WASHER, LOCK NUT, HEX Sliding Lock Retainer Assembly 2,36 (.093) TRAVEL REF A C Ideal for Ethernet Applications Kit consists of 1 sliding lock plate, 2 mounting screws, 2 lock washers, 2 hex nuts Order 1 kit per connector Finish/ Description Material Treatment Sliding Lock Plate Stainless Steel Passivated Screw, Yellow Mounting Steel Chromate Over Washer, Lock Cadmium or Zinc Nut, Hex 210 B Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE51224-1 DA51220-1* DB51221-1 DC51222-1 DD51223-1 A 0,38 (.015) 35,05 (1.380) 43,70 (1.720) 57,40 (2.260) 73,86 (2.908) 71,47 (2.814) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 25,00 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) * Meets IEEE 802.3 Ethernet Specification Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Locking Hardware Jackscrew/Jackpost Assemblies ITT Cannon offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 198-199 for use with ITT Cannon Connectors. Jackpost Assembly Jackscrew Assembly HEAD, JACKSCREW #2-56 UNC THD #4-40 UNC THD #4-40 UNC-2B THD RETAINING COMPOUND #4-40 UNC-2A THD WASHER, #4 LOCK O 3,05 (.120) #4 HEX NUT STUD, JACKSCREW FEMALE POST O 3,05 (.120) Jackscrew Assembly O 5,59 (.220) MAX 0,89 0,13 (.035 .005) CONNECTOR ASSEMBLY Kit consists of 2 studs, 2 heads, 1 tube retaining compound Order one kit per connector Part Number: 9,40 (.370) MAX 16,26 (.640) MAX D110550 Materials and Finishes Material: Stainless Steel 0,64 0,13 (.025 .005) #4-40 UNC THREAD O 5,59 (.220) MAX 1,73 (.068) MAX 4,57 (.180) MAX Jackpost Assembly 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR ASSEMBLY Kit consists of 2 posts, 2 hex nuts, 2 lock washers Order one kit per connector Part Number: D110551 14,10 0,13 (.555 .005) 5,59 (.220) MIN PERFECT THD #4-40 UNC THREAD 5,84 0,13 (.230 .005) 1,14 0,13 (.045 .005) PANEL 3,18 (.125) MAX Materials and Finishes Material: Treatment: #4-40 UNC THREAD Stainless Steel Passivated NOTE: Jackpost is not compatible with rear-panel mount connectors. Dimensions are shown in mm (inch) Dimensions subject to change 213 D Subminiature Accessories Guide Pin Plate Guide Pin Plate Female 9,60 (.378) MAX MOUNTING PANEL Useful in blind mate applications. Kit consists of 1 plate, 2 screws Guide pin inserts for Size 8 cavities for Combo D connectors also available. See page 95. 1,57 (.062) 6,35 (.250) MAX SOLDER POT EXTENSION Plate and Hardware Material: Steel Plate and Hardware Finish: Yellow Chromate over Zinc or Cadmium Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 Part Number DE111920 DA22214 DB22254 DC22071 DD21961 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) C 0,13 (.005) 25,00 (.986) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E 0,13 (.005) 15,27 (.601) 19,43 (.765) 26,29 (1.035) 34,52 (1.359) 33,32 (1.312) F 0,13 (.005) 9,52 (.375) 9,52 (.375) 9,52 (.375) 9,52 (.375) 11,10 (.437) G 0,41 (.016) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 28,58 (1.125) H 0,41 (.016) 30,58 (1.204) 38,91 (1.532) 51,21 (2.016) 67,49 (2.657) 65,10 (2.563) J 0,41 (.016) 12,29 (.484) 12,29 (.484) 11,91 (.469) 11,91 (.469) 14,30 (.563) K 0,41 (.016) 6,15 (.242) 6,15 (.242) 5,94 (.234) 5,94 (.234) 7,16 (.282) Recommended Panel Cutout 2X O 4,22 0,05 (.166 .002) B 2X R K E 2X O 3,66 0,13 (.144 .005) F F J D H 214 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Guide Pin Plate Guide Pin Plate Male A 4,78 0,30 (.188 .012) 6,35 (.250) MAX SOLDER POT EXTENSION Useful in blind mate applications. Kit consists of 1 plate, 2 sems screws, 2 rivets, 2 guide pins, 2 washers Guide pin inserts for Size 8 cavities for Combo D connectors also available. See page 95. Plate and Hardware Material: Plate and Hardware Finish: Guide Pin Material: Shell Size Layout DE 9 DA 16 DB 25 DC 37 DD 50 Part Number DE111919 DA22213 DB22255 DC22070 DD21962 O 4,01 (.158) MAX 22,22 0,76 (.875 .030) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,42 (3.094) 76,20 (3.000) C 1,57 (.062) MAX C 0.25 (.010) 33,91 (1.335) 42,24 (1.663) 55,96 (2.203) 72,42 (2.851) 69,82 (2.749) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) 2X O 3,66 0,13 (.144 .005) D ITT CANNON O 4,06 (.160) REF MAX 1,57 0,13 (.062 .005) 8,71 0,38 (.343 .015) F E G 2X MOUNTING HOLE #4-40 UNC-2B THD 4,06 0,25 (.160 .010) Steel Yellow Chromate over Zinc or Cadmium Stainless Steel A 0,38 (.015) 49,61 (1.953) 57,94 (2.281) 71,63 (2.820) 88,09 (3.468) 85,72 (3.375) B E 0,38 (.015) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 28,58 (1.125) F 0,25 (.010) 19,05 (.750) 19,05 (.750) 19,05 (.750) 19,05 (.750) 22,20 (.874) G 0.13 (.005) 25,00 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) H 0.25 (.010) 12,29 (.484) 12,29 (.484) 12,29 (.484) 12,29 (.484) 15,06 (.593) J 0.38 (.015) 30,58 (1.204) 38,89 (1.531) 51,99 (2.047) 68,25 (2.687) 66,93 (2.635) K 0,13 (.005) 6,15 (.242) 6,15 (.242) 6,15 (.242) 6,15 (.242) 7,52 (.296) Recommended Panel Cutout B C 2X R K D F 2X O 3,66 0,13 (.144 .005) H J 2X O 5,54 0,13 (.218 .005) Dimensions are shown in mm (inch) Dimensions subject to change 215 D Subminiature Accessories Connector Saver Connector Saver Connector Saver Engaging Face, Pin Side A B 5,97 0,25 (.235 .010) C 21,95 0,51 (.864 .020) 6,17 0,25 (.243 .010) INSULATOR ASSY SOCKET CONTACT 2X 10 Connector Savers are used to minimize wear on cable or panel connectors. SHELL, SOCKET FRONT SPACER SHELL, PIN FRONT Note: Hardware removed for clarity. Shell Size DE DA DB Layout 9 15 25 Part Numbers DEBU111515 DABU111512 DBBU111511 A 0,40 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) B 0,25 (.010) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) C 0,25 (.010) 16,92 (.666) 25,25 (.994) 38,96 (1.534) Note: DC-37 and DD-50 not available. Specifications Temperature: -55 C to 105 C Current Rating: 7 A Dielectric Withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Shells Insulator Contacts Spacer Locking Hardware 216 Material Steel Black Thermoplastic, UL 94V-0 Copper Alloy Zinc Alloy Steel Finish Tin/Lead -- Gold Over Nickel -- Clear Chromate Over Zinc Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Accessories Gender Changer Gender Changer Male/Male Pin 14,50 0,64 (.571 .025) A 5,84 0,15 8,36 0,13 (.230 .006) (.329 .005) B 2X O 3,43 (.135) C 12,55 0,38 (.494 .015) Gender Changers modify the mating interface to allow connectors of the same genders to mate. Product Features Low cost way to correct design errors Optional hardware allows design flexibility PIN 1 FRONT SIDE 5,84 0,15 (.230 .006) CONTACT PIN FRONT SHELL PIN 1 REAR SIDE FRONT SHELL 2X 10 RIVET INSULATOR-PC BOARD Note: Grounding dimples available on male/male only. Shell Size DE DA DB DC Layout 9 15 25 37 Part Number Without Hardware DE111805-1 DA111806-1 DB111807-1 DC111808-1 Part Number With Hardware DE111805-5 DA111806-5 DB111807-5 DC111808-5 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) C 0,13 (.005) 16,92 (.666) 25,25 (.994) 38,96 (1.534) 55,42 (2.182) Note: DD-50 not available in male/male. Female/Female Socket A 13,11 0,51 (.516 .020) 6,17 0,13 (.243 .005) FRONT SHELL B C 6,17 0,13 (.243 .005) INSULATOR 12,55 0,38 (.494 .015) Shell Size DE DA DB Layout 9 15 25 SOCKET CONTACT INSULATOR 2X O 3,05 (.120) 2X 10 Gender Changers modify the mating interface to allow connectors of the same genders to mate. Product Features Low cost way to correct design errors Optional hardware allows design flexibility 7,90 0,13 (.311 .005) Part Number Without Hardware DE111813 DA111810 DB111811 0,76 0,26 (.030 .010) Part Number With Hardware DE111813-3 DA111810-3 DB111811-2 A 0,38 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) B 0,13 (.005) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) FRONT SHELL C 0,13 (.005) 16,33 (.643) 24,66 (.971) 38,38 (1.511) Note: DC-37 and DD-50 not available for female/female. Specifications Temperature: -55 C to 105 C Current Rating: 3 A Dielectric Withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Shells Insulator Contacts Rivets (M/M) Locking Hardware M/M F/F Material Steel Glass Epoxy Black Thermoplastic, UL 94V-0 Copper Alloy Copper Alloy Steel Finish Tin/Lead -- -- Gold Over Nickel Tin/Lead Clear Chromate Over Cadmium or Zinc and Mylar Dimensions are shown in mm (inch) Dimensions subject to change 217 D Subminiature Accessories Miscellaneous Dust Cap RAISED GATE MARK 6,35 (.250) A B ITT CANNON XX-XX-XX Dust caps provide protection from moisture and dust for unused I/O ports. Product Features Conductive Dust Caps provide a surface resistivity of at least 1 x 105 ohms/sq Dust Caps meet the static decay test requirements of MIL-B-81705C, Type II. Dust Caps have an integral flange for easy application and removal. Materials and Finishes Material: Black Polyethylene D 1,02 WALL (.040) C NOTE: C dim. applies at point of maximum integral interface length. Part Number DE-59-20 DA-59-20 DB-59-20 DC-59-20 DD-59-20 DE-60-20 DA-60-20 DB-60-20 DC-60-20 DD-60-20 I.D. Socket Socket Socket Socket Socket Pin Pin Pin Pin Pin A 20,32 (.800) 28,45 (1.120) 42,42 (1.670) 58,93 (2.320) 56,90 (2.240) 21,84 (.860) 30,48 (1.200) 44,20 (1.740) 60,71 (2.390) 58,17 (2.290) B 11,43 (.450) 11,68 (.460) 11,68 (.460) 11,68 (.460) 14,48 (.570) 12,95 (.510) 12,95 (.510) 13,46 (.530) 13,46 (.530) 16,00 (.630) C 16,36 (.644) 24,59 (.968) 38,25 (1.506) 54,81 (2.158) 53,11 (2.091) 17,78 (.700) 26,52 (1.044) 39,60 (1.559) 56,90 (2.240) 54,28 (2.137) D 7,59 (.299) 7,62 (.300) 7,49 (.295) 7,37 (.290) 10,41 (.410) 8,92 (.351) 9,02 (.355) 9,09 (.358) 9,37 (.369) 12,04 (.474) Interfacial Seal 2X 10 Interfacial seals provide moisture resistance at the mating interface. Product Features Other Interfacial Seals in the Combo D layouts are available upon request. Materials and Finishes Material: Silastic Sheet Shell Size DE DA DB DC DD DC Layout 9 15 25 37 50 21WA4 Part Number DE53750 DA53750-1 DB53750-2 DC53750-3 DD53750-4 075-0354-003 A 16,66 (.656) 24,99 (.984) 38,88 (1.531) 55,14 (2.171) 52,78 (2.078) 55,14 (2.171) B 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 11,10 (.437) 8,41 (.331) Potting Shell 4,70 (.185) 15,20 (.600) 2X O 3,25 (.128) Potting shells are molded with a thin flange 0,76 (.030) to permit the use of D Subminiature locking devices. Potting shells hold epoxy in place during curing. Materials and Finishes Material: Color: 218 Nylon Natural (white) Shell Size DE DA DB DC DD 0,76 (.030) Layout 9 15 25 37 50 Part Number DE50904-1 DA50905-1 DB50906-1 DC50907-1 DD50908-1 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Selection Index Page Reader's Resource Dimensional Reference Data Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Panel Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Contact Cavity Arrangements Combo D -- Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 Combo D -- Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Standard -- Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Pushfit/Boardlock -- Standard and European . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Alternate Technical Configurations 50 Ohm Coaxial Contact -- Straight and 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Bracket -- Standard and European . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Hardware Views Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 European. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Printed Circuit Board (PCB) Hole Patterns Combination Layouts Coaxial 90 -- Standard Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Coaxial 90 -- European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Coaxial Straight -- Standard/European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 High Power 90 -- Standard Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 High Power 90 -- European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 High Power/High Voltage Straight -- Standard/European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Straight PC Tails (Size 20 Signal Contacts only) -- Standard/European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Standard Layouts 90 Standard -- Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272 90 European -- Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Straight PC Tails -- Plug and Receptacle Standard/European . . . . . . . . . . . . . . . . . . . 274 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 Obsolete Products/Available Products Not Previously Listed . . . . . . . . . . . . . . . . . . . . . 282 Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Product Safety and Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Dimensions are shown in mm (inch) Dimensions subject to change Resource Lease Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 Reader's 90 PC Tails (Size 20 Signal Contacts only) -- European Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 219 D Subminiature Reader's Resource Reader's Resource Panel Mounting 220 Figure 1A Figure 1B Figure 2 Figure 3 Figure Number 1A, 1B 1A, 1B 2 2 2 2 3 3 3 3 Size A, E B, C, D A, E B, C, D A, E B, C, D A, E B, C, D A, E B, C, D Combination of Mated Connectors Pin (See Note Below) Socket Standard Standard Standard Standard Standard Float Mount Standard Float Mount Float Mount Standard Float Mount Standard Standard Reverse Float Mount Standard Reverse Float Mount Reverse Float Mount Standard Reverse Float Mount Standard A +0,76 (.030) 6,35 (.250) 6,04 (.238) 5,53 (.218) 5,23 (.206) 5,53 (.218) 5,23 (.206) -- -- -- -- B +0,76 (.030) 8,63 (.340) 8,71 (.343) -- -- -- -- 9,09 (.358) 9,16 (.361) 9,09 (.358) 9,01 (.355) C +0,76 (.030) 7,49 (.295) 7,56 (.298) 6,68 (.263) 6,75 (.266) 6,68 (.263) 6,37 (.251) 7,95 (.313) 7,64 (.301) 7,95 (.313) 7,87 (.310) F 0,25 (.010) -- -- 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,30 (.130) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,30 (.130) H +0,76 (.030) 7,49 (.295) 7,18 (.283) -- -- -- -- -- -- -- -- Notes: 1. A, B, C and H are dimensions between panels and represent the recommended limit to be used in the design of the connector mounting method. 2. It is recommended that only one assembly, either pin or socket, be float mounted. 3. Standard pin assemblies contained 0,38 (.015) thick front shells on E and A sizes; 0,61 (.024) thick front shells on B, C, and D sizes. 4. Standard connectors accommodate a #4 screw. Float mount connectors accommodate a #2 screw. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Reader's Resource Panel Cutouts Standard Cutout Rear Mounting Cutout (Optional) Front Panel Mounting Rear Panel Mounting Standard Shell Dual Float Mount Shell Standard Shell Dual Float Mount Shell Standard Shell Shell Size DE DA DB DC B 0,13 (.005) 11,09 (.437) 10,23 (.403) 15,26 (.601) 14,40 (.567) 22,14 (.872) 21,25 (.837) 30,37 (1.196) 29,54 (1.163) 29,18 (1.149) 28,16 (1.109) C 0,13 (.005) 24,99 (.984) 24,99 (.984) 33,32 (1.312) 33,32 (1.312) 47,04 (1.852) 47,04 (1.852) 63,50 (2.500) 63,50 (2.500) 61,11 (2.406) 61,11 (2.406) D 0,13 (.005) 12,49 (.492) 12,49 (.492) 16,66 (.656) 16,66 (.656) 23,52 (.926) 23,52 (.926) 31,75 (1.250) 31,75 (1.250) 30,55 (1.203) 30,55 (1.203) E 0,13 (.005) 13,03 (.513) 11,40 (.449) 13,03 (.513) 11,40 (.449) 13,03 (.513) 11,40 (.449) 13,03 (.513) 11,40 (.449) 15,82 (.623) 14,09 (.555) F 0,13 (.005) 6,52 (.257) 5,71 (.225) 6,52 (.257) 5,71 (.225) 6,52 (.257) 5,71 (.225) 6,52 (.257) 5,71 (.225) 7,92 (.312) 7,06 (.278) G 0,05 (.002) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) 3,04 (.120) H 0,05 (.002) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) 1,52 (.060) J 0,05 (.002) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) A 0,13 (.005) 23,01 (.906) 21,28 (.838) 31,34 (1.234) 29,61 (1.166) 45,08 (1.775) 43,33 (1.706) 61,54 (2.423) 59,79 (2.354) 59,15 (2.329) 57,15 (2.250) B 0,13 (.005) 11,50 (.453) 10,64 (.419) 15,67 (.617) 14,80 (.583) 22,55 (.888) 21,66 (.853) 30,78 (1.212) 29,89 (1.177) 29,59 (1.165) 28,57 (1.125) C 0,13 (.005) 24,99 (.984) 24,99 (.984) 33,32 (1.312) 33,32 (1.312) 47,04 (1.852) 47,04 (1.852) 63,50 (2.500) 63,50 (2.500) 61,11 (2.406) 61,11 (2.406) D 0,13 (.005) 12,49 (.492) 12,49 (.492) 16,66 (.656) 16,66 (.656) 23,52 (.926) 23,52 (.926) 31,75 (1.250) 31,75 (1.250) 30,55 (1.203) 30,55 (1.203) E 0,13 (.005) 13,84 (.545) 12,21 (.481) 13,84 (.545) 12,21 (.481) 13,84 (.545) 12,21 (.481) 13,84 (.545) 12,21 (.481) 16,63 (.655) 14,90 (.587) F 0,13 (.005) 6,93 (.273) 6,12 (.241) 6,93 (.273) 6,12 (.241) 6,93 (.273) 6,12 (.241) 6,93 (.273) 6,12 (.241) 8,33 (.328) 7,46 (.294) G 0,05 (.002) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) 2,23 (.088) H 0,05 (.002) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) 1,11 (.044) J 0,05 (.002) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) 2,10 (.083) 3,35 (.132) Dual Float Mount Shell Shell Size DE DA DB DC DD Mounting Method Front Rear Front Rear Front Rear Front Rear Front Rear Dimensions are shown in mm (inch) Dimensions subject to change Resource A 0,13 (.005) 22,19 (.874) 20,47 (.806) 30,53 (1.202) 28,80 (1.134) 44,27 (1.743) 42,51 (1.674) 60,73 (2.391) 59,08 (2.326) 58,34 (2.297) 56,33 (2.218) Reader's DD Mounting Method Front Rear Front Rear Front Rear Front Rear Front Rear 221 D Subminiature Reader's Resource Plug Contact Cavity Arrangements -- Combo D Face View Pin Insert A1 1 2 3 A1 A2 A3 A1 A1 A3 3 4 Shell Size Contact Arrangment No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 1 #8 1 A 3W3 0 #20 3 #8 2 3 4 A 3WK3 0 3 A2 A1 5 A3 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 5W5 0 #20 5 #8 A1 2 1 8 10 9 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 3 5 12 6 13 A2 7 14 1 15 2 11 12 3 4 13 14 B 17W2 15 #20 2 #8 A1 A2 A4 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2 10 3 A5 6 15 16 7 17 8 18 A6 A7 A8 A2 A1 9 Resource 2 11 12 6 14 13 7 8 16 15 A4 A3 Reader's 5 4 6 8 7 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A4 A5 A3 9 A4 1 A2 A1 2 12 17 3 2 1 13 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 3 14 26 5 4 15 27 16 28 6 29 7 18 17 30 3 4 9 2 8 A1 1 7 6 A6 2 1 8 19 20 10 31 32 9 A7 A6 13 11 12 2 1 7 3 8 14 13 6 16 15 A2 A1 A3 14 15 16 17 16 19 20 18 17 1 21 22 7 8 18 17 10 A4 A3 6 A5 11 12 9 10 19 20 11 A1 A3 14 22 21 3 10 5 4 11 12 26 25 24 3 2 1 15 5 4 16 17 6 18 7 19 8 20 9 10 21 22 11 23 24 12 13 A2 25 C 27W2 25 #20 2 #8 2 23 5 4 9 6 13 27 7 28 A4 8 15 14 29 30 31 32 D 36W4 32 #20 4 #8 10 21 33 A2 A1 4 7 C 25W3 22 #20 3 #8 A5 9 3 6 C 17W5 12 #20 5 #8 5 4 D 24W7 17 #20 7 #8 25 222 3 6 10 10 9 1 5 9 19 20 A3 C 21WA4 17 #20 4 #8 A2 4 A 11W1 10 #20 1 #8 C 13W6 7 #20 6 #8 5 4 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A1 A1 3 8 B 13W3 10 #20 3 #8 C 8W8 0 #20 8 #8 1 7 B 21W1 20 #20 1 #8 A3 A2 5 5 A1 5 2 1 5 10 5 A1 A2 A3 B 9W4 5 #20 4 #8 4 11 4 4 A 7W2 5 #20 2 #8 A4 2 1 3 A2 2 1 11 22 34 35 1 A2 A1 12 23 36 2 16 24 37 38 39 40 41 30 3 17 31 D 43W2 41 #20 2 #8 5 4 18 32 19 20 33 34 6 7 21 35 8 22 36 9 23 37 10 24 38 25 39 11 26 40 12 27 41 13 28 42 14 15 A1 29 43 44 45 46 D 47W1 46 #20 1 #8 Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Reader's Resource Receptacle Contact Cavity Arrangements -- Combo D Face View Socket Insert A1 2 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A3 1 A2 A1 A3 A2 2 A2 5 E 5W1 4 #20 1 #8 A 3W3 0 #20 3 #8 5 4 3 2 A 3WK3 0 3 1 A4 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A3 1 2 5 4 6 7 15 14 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5 4 13 12 2 3 A1 1 9 10 8 20 9 8 19 A7 17 A6 2 3 4 13 14 15 A5 8 17 A4 6 7 16 15 A3 A2 A1 4 3 2 6 A5 14 13 12 13 2 3 12 A4 11 Shell Size Contact Arrangement No. of Size 20 Contacts No. of Size 8 Contacts A6 1 A4 A5 12 24 41 40 39 38 37 23 36 11 10 11 A2 1 11 10 A3 A1 22 10 8 35 34 9 21 7 5 A3 A2 33 32 A2 A1 A5 A4 A2 A1 21 8 A4 6 5 4 3 2 1 32 31 6 A3 9 20 8 19 7 18 6 17 7 6 14 28 29 30 5 13 4 4 15 3 3 14 2 13 27 25 26 3 9 2 8 A2 1 A1 7 1 A2 A1 12 A2 13 25 12 24 11 10 23 22 9 8 21 20 7 19 6 18 5 17 4 16 3 15 2 1 A1 14 C 27W2 25 #20 2 #8 1 2 11 10 12 4 10 C 17W5 12 #20 5 #8 5 16 5 11 A2 A3 A1 9 24 23 22 21 20 19 18 16 17 D 36W4 32 #20 4 #8 8 20 A3 C 25W3 22 #20 3 #8 A3 9 10 22 4 10 7 19 31 6 18 30 5 17 29 4 16 28 3 15 27 2 14 26 1 15 A1 25 14 29 13 46 45 44 13 28 43 D 43W2 41 #20 2 #8 42 12 27 41 11 26 40 9 10 25 39 24 38 8 23 37 7 22 36 6 21 35 5 20 34 4 19 33 3 18 32 2 17 31 Resource A1 9 12 D 24W7 17 #20 7 #8 A2 1 7 Reader's 15 3 5 15 17 16 8 2 8 1 C 21WA4 17 #20 4 #8 A6 2 7 3 A 11W1 10 #20 1 #8 C 13W6 7 #20 6 #8 4 5 14 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A7 1 A1 4 9 11 12 C 8W8 0 #20 8 #8 9 5 10 B 21W1 20 #20 1 #8 Shell Size Contact Arrangement No. of Size 20 Cavitites No. of Size 8 Cavities A3 6 3 B 13W3 10 #20 3 #8 5 16 7 A4 A1 A1 6 A1 6 7 18 B 17W2 15 #20 2 #8 A8 A2 B 9W4 5 #20 4 #8 11 10 A1 1 4 A 7W2 5 #20 2 #8 3 B 5W5 0 #20 5 #8 A2 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A1 3 4 1 16 30 D 47W1 46 #20 1 #8 Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts. Dimensions are shown in mm (inch) Dimensions subject to change 223 D Subminiature Reader's Resource Plug Contact Cavity Arrangements Face View Pin Insert 2 1 3 2 1 5 4 9 6 Shell Size Contact Arrangement Contact Size 4 11 5 12 6 13 8 7 14 E 9 #20 2 1 15 3 15 14 9 8 7 3 10 20 3 21 5 6 18 17 5 4 22 23 6 24 8 7 26 25 9 27 Shell Size Contact Arrangement Contact Size 12 10 11 29 28 30 13 31 15 14 32 33 16 34 18 17 35 36 11 12 10 9 8 7 19 20 A 15 #20 22 21 23 24 13 25 B 25 #20 2 1 2 1 4 16 18 19 34 37 4 3 20 19 35 36 5 21 37 6 38 7 39 8 24 23 22 9 25 40 41 C 37 #20 10 26 42 12 11 27 28 44 43 14 13 30 29 45 46 15 47 16 48 17 33 32 31 49 50 D 50 #20 Receptacle Contact Cavity Arrangements Face View Socket Insert 5 Resource Reader's 224 2 3 4 9 8 Shell Size Contact Arrangement Contact Size 1 13 12 6 7 E 9 #20 37 Shell Size Contact Arrangement Contact Size 18 36 17 35 16 34 15 33 14 32 13 12 31 30 11 10 29 9 28 C 37 #20 8 27 23 22 A 15 #20 6 7 26 25 5 24 4 23 2 3 22 21 1 20 8 21 7 20 6 19 5 18 4 17 3 16 1 2 15 14 B 25 #20 17 19 9 11 10 24 25 33 50 16 32 49 15 31 48 14 30 47 13 29 46 12 28 45 11 27 44 10 9 26 43 8 42 6 7 24 25 23 41 40 5 22 39 4 21 38 3 20 37 2 19 36 1 18 35 34 D 50 #20 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Reader's Resource Pushfit/Boardlock -- Standard Straight (Z) 90 (C) Pushfit/Boardlock -- European Straight (-146) 90 (-146) Alternate 50 Ohm Coaxial Configuration 90 (X) 0,62 (.024) 2,54 (.100) O 0,79 (.031) 0,62 (.024) 5,59 (.220) MIN O 0,79 (.031) 2,54 (.100) Resource 6,96 (2.74) MIN Reader's Straight (X) 11,94 0,33 (.470 .013) Dimensions are shown in mm (inch) Dimensions subject to change 225 D Subminiature Reader's Resource Hardware Views (Standard) Through Hole (Eyelet) Tab Shells (K) K Clinch Nut (E) 4,19 (.165) MAX K O 3,05 (.120) O 4,11 (.162) #4-40 UNC 0,60 (.025) MAX. Dimensions -- Plug Shell Size DE DA DB DC DD Dual Float Mount (Y) K 0,317 (.0125) 1,206 (.0475) 1,206 (.0475) -- -- -- K 0,25 (.010) -- -- 1,52 (.060) 1,52 (.060) 1,52 (.060) 3,30 (.130) MAX. 0,79 (.031) OTAL DIAMETRICAL FLOAT (FOR MISALIGNMENT) 0,79 0,13 (.031 .005) OVERALL FREE FLOAT 0,10 - 0,30 (.004 - .012) Dimensions -- Receptacle Shell Size DE DA DB DC DD K 0,318 (.0125) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) 1,206 (.0475) O 2,26 0,08 (.089 .003) RIVET WASHER Alternate Bracket Configuration Standard Footprint (P) European Footprint (P) Dimensions Shell Size DE, DA, DB, DC DD R 0,25 (.010) 11,61 (.457) 12,78 (.503) S 0,25 (.010) 12,78 (.503) 13,95 (.549) R S Reader's Resource Supplied with connectors without boardlocks. 226 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Reader's Resource Hardware Views (European) Through Hole Clinch Nut (X/E) M3 #4-40 UNC-3B O 3,05 (.120) 2,80 (.110) Plastic Bracket with Bushing (1A5N) O 3,05(.120) Metal Bracket with Bushing (1AFN) M3 #4-40 Metal Bracket with Captive Nut (1A9N/1A7N) M3 #4-40 Plastic Bracket with Post (1APN/1A6N) M3 #4-40 Metal Bracket with Post (1AHN/1A8N) M3 #4-40 Reader's O 3,05(.120) Plastic Bracket with Captive Nut (1ATN/1AVN) Resource Dimensions are shown in mm (inch) Dimensions subject to change 227 PCB Hole Pattern -- Standard Coaxial 90 -- Plug 25,00 (.984) 5,49 (.216) 5,49 (.216) 6,86 (.270) Signal Contact 2,54 (.100) Coax Contact 2,54 (.100) 6,86 (.270) Coax Contact Mounting Hole 2,74 (.108) 2,54 (.100) 2,84 (.112) 8,64 (.340) 7,19 (.283) REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,54 (.100) 8,23 (.324) REAR FLANGE REF 6,86 (.270) Coax Contact 2,54 (.100) 2,84 (.112) 8,64 (.340) 6,86 (.270) Mounting Hole 2,54 (.100) 9,40 (.370) 33,32 (1.312) 33,32 (1.312) 9,40 (.370) 5,49 (.216) Signal Contact 7,19 (.283) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF E 5W1 4 #20 1 #8 8,64 (.340) 9,40 (.370) REAR FLANGE REF A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47.04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 7,67 (.302) 9,60 (.378) 5,94 (.234) 9,60 (.378) 6,86 (.270) 6,86 (.270) 0,86 (.034) Coax Contact 8,23 (.324) 2,54 (.100) Mounting Hole 2,54 (.100) Mounting Hole 2,54 (.100) 2,54 (.100) 2,84 (.112) 9,40 (.370) Coax Contact 5,49 5,49 (.216) (.216) 8,64 Signal (.340) Contact 7,19 (.283) 8,23 (.324) 8,23 (.324) REAR FLANGE REF 9,40 (.370) 8,64 (.340) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 14,48 (.570) 8,28 (.326) 7,77 (.306) 5,54(.218) 8,28 (.326) Coax Contact Coax Contact Mounting Hole 2,54 (.100) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 9,40 (.370) 8,64 (.340) 7,19 (.283) REAR FLANGE REF 8,64 (.340) REAR FLANGE REF 9,68 (.381) Resource B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.852) 47,04 (1.852) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 8,64 (.340) 7,19 (.283) REAR FLANGE REF 6,91 (.272) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Coax Contact B 17W2 15 #20 2 #8 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 2,54 (.100) 2,84 (.112) Signal Contact 2,84 (.112) Mounting Hole 2,54 (.100) 9,40 (.370) 2,80 (.110) 8,28 (.326) Reader's 16,56 (.652) 16,56 (.652) 2,54 (.100) REAR FLANGE REF 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Signal Contact 4,14 (.163) REAR FLANGE REF 6,91 (.272) 9,40 (.370) 2,80 (.110) 7,19 (.283) Signal Contact 4,14 (.163) 228 Mounting Hole 5,54(.218) 2,54 (.100) 9,40 (.370) Coax Contact 8,64 (.340) 7,19 (.283) Signal Contact 8,28 (.326) REAR FLANGE REF REAR FLANGE REF Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) 6,91 (.272) 9,68 (.381) 12,42 (.489) REAR FLANGE REF 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard Coaxial 90 -- Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,56 (.888) 22,86 (.900) 19,33 (.761) 15,82 (.623) 16,51(.650) 15,24 (.600) 8,89 (.350) 16,56 (.652) 9,09 (.358) 10,16 (.400) 2,54 (.100) Coax Contact 22,10 (.870) 22,86 (.900) Mounting Hole 2,54 (.100) 11,10 (.437) 4,37 (.172) 2,36 (.093) Coax Contact 3,81 (.150) Mounting Hole 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 8,64 (.340) 8,64 (.340) 9,40 (.370) 9,40 (.370) 7,19 (.283) Signal Contact REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 11,05 (.435) 5,54(.218) 2,54 (.100) 8,28 (.326) Coax Contact 8,28 (.326) 11,05 (.435) 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) 2,54 (.100) Mounting Hole 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 8,64 (.340) Coax Contact 8,28 (.326) 2,80 (.110) Signal Contact 9,40 (.370) 7,19 (.283) 8,64 (.340) 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) REAR FLANGE REF 2,80 (.110) C 17W5 12 #20 5 #8 7,19 (.283) 9,40 (.370) 8,28 (.326) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Signal Contact 6,91 (.272) REAR FLANGE REF 9,68 (.381) C 21WA4 17 #20 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 13,82 (.544) 8,28 (.326) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) Reader's 11,05 (.435) Coax Contact Mounting Hole 5,54(.218) 2,54 (.100) 2,84 (.112) 8,64 (.340) REAR FLANGE REF Signal Contact 2,80 (.110) 7,19 (.283) 9,40 (.370) 8,28 (.326) 6,91 (.272) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 9,68 (.381) 12,42 (.489) Resource 15,19 (.598) 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 3 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change 229 PCB Hole Pattern -- Standard Coaxial 90 -- Plug 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 5,54(.218) 2,84 (.112) Mounting Hole 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,84 (.112) Coax Contact 4,14 (.163) 6,86 (.270) 11,53 (.454) 6,91 (.272) 9,40 (.370) 13,72 (.540) 10,06 (.396) 9,68 (.381) REAR FLANGE REF 12,42 (.489) REAR FLANGE REF 20,57 (.810) 15,19 (.598) 20,57 (.810) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) Signal Contact 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) Mounting Hole 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,80 (.110) 8,28 (.326) Reader's Resource 10,06 (.396) 230 9,40 (.370) Coax Contact 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 11,53 (.454) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) 20,57 (.810) 20,70 (.815) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 43W2 41 #20 2 #20 D 47W1 46 #20 1 #20 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard Coaxial 90 -- Receptacle 25,00 (.984) 5,49 (.216) 5,49 (.216) 6,86 (.270) Signal Contact 2,54 (.100) 33,32 (1.312) 33,32 (1.312) 6,86 (.270) Mounting Hole 6,86 (.270) Coax Contact 2,54 (.100) 2,54 (.100) Mounting Hole 2,54 (.100) 2,54 (.100) Coax Contact 8,64 (.340) REAR FLANGE REF Mounting Hole 2,54 (.100) 2,84 (.112) 8,64 (.340) 7,19 (.283) 9,40 (.370) 8,64 (.340) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Coax Contact 2,74 (.108) 2,84 (.112) 9,40 (.370) 6,86 (.270) REAR FLANGE REF 7,19 (.283) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF E 5W1 4 #20 1 #8 5,49 (.216) Signal Contact 9,40 (.370) REAR FLANGE REF A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 14,48 (.570) 33,32 (1.312) 9,60 (.378) 14,48 (.570) 5,94 (.234) 7,67 (.302) 9,60 (.378) 6,86 (.270) 6,86 (.270) 0,86 (.034) Coax Contact 8,23 (.324) Mounting Hole 2,54 (.100) 2,54 (.100) Mounting Hole 2,54 (.100) 2,54 (.100) 2,84 (.112) 9,40 (.370) Coax Contact 5,49 5,49 (.216) (.216) 8,64 Signal (.340) Contact 9,40 (.370) 7,19 (.283) 8,23 (.324) 8,23 (.324) REAR FLANGE REF 8,64 (.340) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 8,28 (.326) 8,28 (.326) 7,77 (.306) 5,54(.218) Coax Contact Mounting Hole Coax Contact 5,54(.218) 2,54 (.100) Mounting Hole 2,54 (.100) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 9,40 (.370) REAR FLANGE REF 9,40 (.370) 8,64 (.340) 7,19 (.283) 4,14 (.163) Signal Contact 2,80 (.110) Signal Contact REAR FLANGE REF 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF 6,91 (.272) B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 7,19 (.283) 6,91 (.272) 9,68 (.381) 6,91 (.272) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 2,54 (.100) 2,84 (.112) Signal Contact 2,84 (.112) 9,40 (.370) Coax Contact 8,64 (.340) 7,19 (.283) Signal Contact 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 9,68 (.381) 9,68 (.381) 12,42 (.489) B 17W2 15 #20 2 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) 15,19 (.598) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change Resource 12,42 (.489) REAR FLANGE REF 6,91 (.272) 15,19 (.598) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,54 (.100) 9,40 (.370) 2,80 (.110) 8,28 (.326) REAR FLANGE REF Coax Contact Reader's 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 8,64 (.340) 8,64 (.340) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,54 (.100) 7,19 (.283) 4,14 (.163) 231 PCB Hole Pattern -- Standard Coaxial 90 -- Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,86 (.900) 22,56 (.888) 22,10 (.870) 22,86 (.900) 19,33 (.761) 16,51(.650) 15,24 (.600) 9,09 (.358) 11,10 (.437) 2,54 (.100) 3,81 (.150) 15,82 (.623) 16,56 (.652) 8,89 (.350) 10,16 (.400) Mounting Hole 2,36 (.093) 4,37 (.172) Coax Contact Coax Contact Mounting Hole 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 9,40 (.370) 8,64 (.340) 9,40 (.370) 7,19 (.283) 8,64 (.340) Signal Contact REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) Coax Contact Mounting Hole 11,05 (.435) 8,28 (.326) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 8,64 (.340) 2,80 (.110) 7,19 (.283) 8,64 (.340) Signal Contact 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) Signal Contact REAR FLANGE REF 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 5,54(.218) 2,84 (.112) 9,40 (.370) Coax Contact 8,28 (.326) 2,80 (.110) 6,91 (.272) 9,68 (.381) C 17W5 12 #20 5 #8 7,19 (.283) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) C 21WA4 17 #20 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 13,82 (.544) Resource 11,05 (.435) Coax Contact 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 2,54 (.100) 5,54(.218) 2,54 (.100) 2,84 (.112) 9,40 (.370) 2,80 (.110) 7,19 (.283) 8,28 (.326) REAR FLANGE REF 6,91 (.272) 9,68 (.381) 6,91 (.272) Signal Contact 8,64 (.340) REAR FLANGE REF 9,68 (.381) 12,42 (.489) 15,19 (.598) Reader's 17,96 (.707) 232 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 3 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard Coaxial 90 -- Receptacle 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 5,54(.218) Mounting Hole 2,84 (.112) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,84 (.112) 10,06 (.396) 9,40 (.370) Coax Contact 6,86 (.270) 4,14 (.163) 11,53 (.454) 6,91 (.272) 13,72 (.540) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 12,42 (.489) 20,57 (.810) 15,19 (.598) 20,57 (.810) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 61,12 (2.406) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Signal Contact 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) 2,84 (.112) 2,84 (.112) Mounting Hole 2,54 (.100) 2,54 (.100) 2,80 (.110) 8,28 (.326) 11,53 (.454) 11.53 (.454) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) Coax Contact 6,91 (.272) 9,40 (.370) 10,06 (.396) 9,68 (.381) 12,42 (.489) 15,19 (.598) REAR FLANGE REF 15,19 (.598) 17,96 (.707) 20,57 (.810) 20,70 (.815) D 43W2 41 #20 2 #8 Reader's Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 47W1 46 #20 1 #8 Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) Resource Signal Contact X 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 233 PCB Hole Pattern -- European Coaxial 90 -- Plug 33,32 (1.312) 25,00 (.984) Signal Contact 5,49 (.216) 6,86 (.270) 5,49 (.216) 2,54 (.100) 2,54 (.100) Coax Contact 10,90 (.429) 6,86 (.270) 2,54 (.100) Mounting Hole 10,90 (.429) 9,40 (.370) 33,32 (1.312) 6,86 (.270) Mounting Hole 2,54 (.100) Coax Contact 6,86 (.270) 2,54 (.100) Coax Contact 9,40 (.370) Mounting Hole 2,54 (.100) 2,74 (.108) 5,49(.216) Signal Contact 10,90 (.429) 9,40 (.370) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF A 3W3 0 #20 3 #8 E 5W1 4 #20 1 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 7W2 5 #20 2 #8 47,04 (1.852) 14,48 (.570) 33,32 (1.312) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 8,23 (.324) Signal Contact 14,48 (.570) 7,67 (.302) 2,54 (.100) 2,54(.100) Coax Contact Mounting Hole 5,94 (.234) Mounting Hole 0,86 (.034) 2,54 (.100) 2,54 (.100) Coax Contact 10,90 (.429) 5,49 (.216) 9,40 (.370) 5,49 (.216) 9,40 (.370) 10,90 (.429) 8,23 (.324) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF A 11W1 10 #20 1 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) Coax Contact 8,28 (.326) 7,77 (.306) Mounting Hole Signal Contact 5,54(.218) 2,54 (.100) 2,54 (.100) Coax Contact Signal 2,80 (.110) Contact 4,14 (.163) 10,90 (.429) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 Resource 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 10,90 (.429) 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) 2,54 (.100) Signal Contact 2,54 (.100) 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54(.100) Signal Contact Coax Contact 2,80 (.110) 8,28 (.326) 6,91 (.272) REAR FLANGE REF Reader's REAR FLANGE REF 9,68 (.381) 47,04 (1.852) 234 9,40 (.370) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,54 (.100) 2,54 (.100) 9,40 (.370) REAR FLANGE REF 8,28 (.326) 5,54(.218) 5,54(.218) 4,14 (.163) 10,90 (.429) REAR FLANGE REF B 5W5 0 #20 5 #8 9,68 (.381) Coax Contact 9,40 (.370) 10,90 (.429) 6,91 (.272) 9,68 (.381) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF B 17W2 15 #20 2 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) 9,40 (.370) 8,28 (.326) 9,68 (.381) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European Coaxial 90 -- Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,56 (.888) 22,86 (.900) 22,86 (.900) 15,24 (.600) 16,51(.650) 2,54 (.100) 16,56 (.652) 11,10 (.437) 9,09 (.358) Mounting Hole 3,81 (.150) Mounting Hole Coax Contact 10,16 (.400) 8,89 (.350) Coax Contact 15,82 (.623) 2,36(.093) 4,37(.172) 2,54(.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 9,40 (.370) 10,90 (.429) 10,90 (.429) 9,40 (.370) Signal Contact 9,40 (.370) REAR FLANGE REF 17,96 (.707) REAR FLANGE REF 20.70 (.815) REAR FLANGE REF 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 11,05 (.435) Coax Contact 22,68 (.893) 15,70 (.618) 8,71 (.343) 2,54 (.100) 5,54(.218) 2,80 (.110) 10,90 (.429) 6,91 (.272) REAR FLANGE REF 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) 13,82 (.544) 11,05 (.435) 8,28 (.326) Coax Contact REAR FLANGE REF 6,91 (.272) 9,68 (.381) 10,90 (.429) 9,68 (.381) 2,80 (.110) Signal Contact REAR FLANGE REF REAR FLANGE REF 12,42 (.489) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 9,40 (.370) 8,28 (.326) 6,91 (.272) 6,91 (.272) Mounting Hole 2,54 (.100) 5,54(.218) 9,40 (.370) 8,28 (.326) Signal Contact 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) 2,80 (.110) 10,90 (.429) 8,28 (.326) 11,05 (.435) 15,19 (.598) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 17,96 (.707) C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) C 27W2 25 #20 2 #8 Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Reader's Mounting Hole 2,54 (.100) 2,54 (.100) 13,82 (.544) 13,82 (.544) 5,54(.218) 5,54(.218) 5,54(.218) 22,68 (.893) 16,56 (.652) 16,56 (.652) 11,05 (.435) 8,28 (.326) REAR FLANGE REF C 21WA4 17 #20 4 #8 63,50 (2.500) 11,05 (.435) 6,91 (.272) 9,68 (.381) 9,68 (.381) C 17W5 12 #20 5 #8 Coax Contact 9,40 (.370) 8,28 (.326) Signal Contact 6,91 (.272) REAR FLANGE REF Mounting Hole 2,54 (.100) 2,54 (.100) 9,40 (.370) 8,28 (.326) Signal Contact 8,28 (.326) 5,54(.218) 5,54(.218) 2,80 (.110) 10,90 (.429) 11,05 (.435) 8,28 (.326) Coax Contact Mounting Hole 5,54(.218) 2,54 (.100) 15,70 (.618) 11,05 (.435) 8,28 (.326) 5,54(.218) 22,68 (.893) 15,70 (.618) Dimensions are shown in mm (inch) Dimensions subject to change 235 PCB Hole Pattern -- European Coaxial 90 -- Receptacle 25,00 (.984) Signal Contact 5,49 (.216) 33,32 (1.312) 6,86 (.270) 5,49 (.216) 2,54 (.100) 2,54 (.100) 6,86 (.270) 2,54 (.100) Mounting Hole 33,32 (1.312) 6,86 (.270) 6,86 (.270) Mounting Hole 2,54 (.100) High Power Contact Mounting Hole 2,74 (.108) 2,54 (.100) Coax Contact 10,90 (.429) 9,40 (.370) 10,90 (.429) Coax Contact 5,49 (.216) 10,90 (.429) 9,40 (.370) Signal 9,40 (.370) Contact 8,23 (.324) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF E 5W1 4 #20 1 #8 REAR FLANGE REF REAR FLANGE REF A 3W3 0 #20 3 #8 REAR FLANGE REF A 7W2 5 #20 2 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 9,60 (.378) 6,86 (.270) 6,86 (.270) 8,23 (.324) Signal Contact 5,94 (.234) 9,60 (.378) 2,54 (.100) 2,54(.100) Mounting Hole Mounting Hole 7,67 (.302) Coax Contact 0,86 (.034) 2,54 (.100) 2,54 (.100) Coax Contact 10,90 (.429) 5,49 (.216) 9,40 (.370) 5,49 (.216) 9,40 (.370) 10,90 (.429) 8,23 (.324) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF A 11W1 10 #20 1 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 8,28 (.326) Mounting Hole Signal Contact REAR FLANGE REF B 5W5 0 #20 5 #8 Mounting Hole Coax Contact 5,54(.218) 2,54 (.100) 7,77 (.306) 5,54(.218) 2,54 (.100) Coax Contact 5,54(.218) 2,54 (.100) 2,54 (.100) Signal Contact 4,14 (.163) 2,80 (.110) 4,14 (.163) 9,40 (.370) 10,90 (.429) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 13W3 10 #20 3 #8 Resource 47,04 (1.852) Reader's 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 2,54 (.100) 10,90 (.429) Signal Contact 6,91 (.272) 9,68 (.381) B 17W2 15 #20 2 #8 Mounting Hole Coax Contact 9,40 (.370) 10,90 (.429) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) 9,40 (.370) 8,28 (.326) 9,68 (.381) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,54 (.100) 2,54(.100) 6,91 (.272) 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) Coax Contact 2,80 (.110) 8,28 (.326) Signal Contact 2,54 (.100) 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) REAR FLANGE REF 236 REAR FLANGE REF 9,68 (.381) B 9W4 5 #20 4 #8 13,82 (.544) 10,90 (.429) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European Coaxial 90 -- Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,86 (.900) 22,86 (.900) 16,51(.650) 10,16 (.400) Mounting Hole 15,82 (.623) 16,56 (.652) 8,89 (.350) 3,81 (.150) 22,56 (.888) 19,33 (.761) 15,24 (.600) 11,10 (.437) Mounting Hole Coax Contact 2,54 (.100) 9,09 (.358) 4,37(.172) Coax Contact 2,36(.093) 2,54(.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 10,90 (.429) 9,40 (.370) REAR FLANGE REF 9,40 (.370) 9,40 (.370) Signal Contact REAR FLANGE REF 17,96 (.707) 10,90 (.429) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 8,71 (.343) 11,05 (.435) 5,54(.218) 2,54 (.100) 15,70 (.618) 11,05 (.435) Coax Contact 8,28 (.326) Mounting Hole 22,68 (.893) 15,70 (.618) 2,54 (.100) 2,80 (.110) 2,80 (.110) 8,28 (.326) 10,90 (.429) Signal Contact 10,90 (.429) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,40 (.370) 8,28 (.326) Signal Contact 6,91 (.272) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,54 (.100) 5,54(.218) 2,54 (.100) REAR FLANGE REF 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 9,40 (.370) 11,05 (.435) 8,28 (.326) Coax Contact REAR FLANGE REF C 17W5 12 #20 5 #8 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) C 21WA4 17 #20 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 16,56 (.652) 16,56 (.652) 15,70 (.618) 11,05 (.435) 11,05 (.435) 11,05 (.435) Coax Contact 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) Coax Contact 2,54 (.100) 2,80 (.110) 10,90 (.429) 8,28 (.326) 9,68 (.381) 6,91 (.272) 9,68 (.381) 10,90 (.429) 2,80 (.110) Signal Contact Signal Contact REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) 9,40 (.370) 8,28 (.326) 6,91 (.272) 12,42 (.489) Mounting Hole 2,54 (.100) 5,54(.218) 2,54 (.100) 6,91 (.272) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 9,40 (.370) REAR FLANGE REF 8,28 (.326) 11,05 (.435) 15,19 (.598) C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) Resource 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Reader's 8,28 (.326) Mounting Hole 13,82 (.544) 13,82 (.544) 13,82 (.544) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change 237 PCB Hole Pattern -- Standard/European 5,49 (.216) 33,32 (1.312) 33,32(1.312) 25,00 (.984) Signal Contact Coaxial Straight -- Plug 5,49 (.216) Mounting Hole Coax Contact 2,84 (.112) 2,54 (.100) 6,86 (.270) 6,86 (.270) 6,86 (.270) 2,54 (.100) Mounting Hole 2,54 (.100) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,74 (.108) 2,54 (.100) 2,54 (.100) E 5W1 4 #20 1 #8 Mounting Hole Coax Contact 2,54 (.100) 6,86 (.270) 5,49 (.216) Signal Contact A 3W3 0 #20 3 #8 Coax Contact 2,84 (.112) A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 9,60 (.378) 6,86 (.270) 14,48 (.570) 9,60 (.378) 7,67 (.302) 6,86 (.270) 5,94 (.234) 0,86 (.034) 8,23 (.324) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) Mounting Hole 2,54 (.100) 5,49 5,49 (.216) (.216) Signal Contact Coax Contact Mounting Hole Coax Contact 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 7,77 (.306) 14,48 (.570) 8,28 (.326) 14,48 (.570) 7,77 (.306) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Mounting Hole Coax Contact 6,91 (.272) 2,80 (.110) Signal Contact 4,14 (.163) Signal Contact 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 9,68 (.381) B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,01(1.852) Resource 47,04(1.852) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 8,28 (.326) 5,54(.218) 5,54(.218) Coax Contact 5,54(.218) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Signal Contact 2,80 (.110) 8,28 (.326) 9,68 (.381) Reader's 16,56 (.652) 16,56 (.652) 6,91 (.272) 238 Coax Contact 4,14 (.163) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Coax Contact Mounting Hole 9,68 (.381) B 17W2 15 #20 2 #8 8,28 (.326) 6,91 (.272) 6,91 (.272) Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European Coaxial Straight -- Plug 63,50(2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,51(.650) 15,24 (.600) 8,89 (.350) Coax Contact 22,56 (.888) 15,82 (.623) 9,09 (.358) 10,16 (.400) 2,54 (.100) 16,56 (.652) 3,81 (.150) Coax Contact Mounting Hole 11,10 (.437) 4,37 (.172) 2,36 (.093) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) Mounting Hole Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63.50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 15,70 (.618) 11,05 (.435) 15,70 (.618) 8,71 (.343) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,80 (.110) Mounting Hole Signal Contact Coax Contact 8,28 (.326) 2,80 (.110) Mounting Hole 6,91 (.272) Signal Contact 8,28 (.326) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 17W5 12 #20 5 #8 Coax Contact 6,91 (.272) 9,68 (.381) C 21WA4 17 #20 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 16,56 (.652) 13,82 (.544) 11,05 (.435) 8,28 (.326) 11,05 (.435) 8,28 (.326) Reader's 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 2,84 (.112) 2,54 (.100) Coax Contact 2,80 (.110) Mounting Hole Signal Contact 8,28 (.326) 6,91 (.272) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 17,96 (.707) C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) C 27W2 25 #20 2 #8 Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Dimensions are shown in mm (inch) Dimensions subject to change 239 PCB Hole Pattern -- Standard/European Coaxial Straight -- Plug 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 12,42 (.489) 9,68 (.381) 6,86 (.270) Coax Contact 6,91 (.272) 4,14 (.163) 2,84 (.112) 2,54 (.100) 3,96 (.156) 2,84 (.112) 2,54 (.100) 2,84 (.112) Mounting Hole 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 22,10 (.870) D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 20,70 (.815) 20,57 (.810) 17,96 (.707) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 9,68 (.381) 6,91 (.272) 9,68 (.381) 6,91 (.272) 8,28 (.326) Coax Contact 2,80 (.110) 2,54 (.100) 2,84 (.112) 3,96 (.156) 2,54 (.100) 2,84 (.112) Mounting Hole 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) Reader's Resource 22,10 (.870) 240 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 43W2 41 #20 2 #8 11,05 (.435) 13,82 (.544) 13,82 (.544) D 47W1 46 #20 1 #8 Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European 33,32(1.312) 25,00 (.984) 5,49 (.216) Signal Contact Coaxial Straight -- Receptacle 5,49 (.216) Mounting Hole Coax Contact 2,84 (.112) 2,54 (.100) 6,86 (.270) 33,32 (1.312) 6,86 (.270) 6,86 (.270) 2,54 (.100) 2,54 (.100) 6,86 (.270) 2,74 (.108) 2,54 (.100) Mounting Hole 2,54 (.100) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 1 #8 Mounting Hole Coax Contact 2,54 (.100) 5,49 (.216) Signal Contact A 3W3 0 #20 3 #8 Coax Contact 2,84 (.112) A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 9,60 (.378) 6,86 (.270) 14,48 (.570) 14,48 (.570) 9,60 (.378) 7,67 (.302) 5,94 (.234) 6,86 (.270) 0,86 (.034) 8,23 (.324) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) Mounting Hole 2,54 (.100) 5,49 5,49 (.216) (.216) Signal Contact Coax Contact Mounting Hole Coax Contact 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 8,28 (.326) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 5,54(.218) 7,77 (.306) 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,84 (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Coax Contact Coax Contact 4,14 (.163) Signal Contact Signal Contact 4,14 (.163) 6,91 (.272) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,80 (.110) 9,68 (.381) B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,01(1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 5,54(.218) 8,28 (.326) 5,54(.218) 5,54(.218) Coax Contact 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,84 (.112) 2,54 (.100) 2,54 (.100) Mounting Hole Signal Contact 2,80 (.110) 8,28 (.326) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 6,91 (.272) 9,68 (.381) B 17W2 15 #20 2 #8 Mounting Hole Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) 8,28 (.326) 6,91 (.272) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change Resource 6,91 (.272) Coax Contact Reader's 47,04(1.852) 241 PCB Hole Pattern -- Standard/European Coaxial Straight -- Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,51(.650) 22,56 (.888) 16,56 (.652) 15,24 (.600) 15,82 (.623) 9,09 (.358) 11,10 (.437) 8,89 (.350) 10,16 (.400) Mounting Hole 2,54 (.100) 3,81 (.150) 2,54 (.100) Coax Contact 2,36 (.093) 4,37 (.172) Coax Contact 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) Mounting Hole Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63.50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 8,71 (.343) 11,05 (.435) 8,28 (.326) 5,54(.218) 2,84 (.112) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,84 (.112) 2,80 (.110) 2,80 (.110) Signal Contact Mounting Hole Mounting Hole C 25W3 22 #20 3 #8 Coax Contact 6,91 (.272) 9,68 (.381) C 21WA4 17 #20 4 #8 Reader's Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 9,68 (.381) 9,68 (.381) C 17W5 12 #20 5 #8 Signal Contact 6,91 (.272) 6,91 (.272) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 15,70 (.618) 11,05 (.435) 8,28 (.326) Coax Contact 22,68 (.893) 242 Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European Coaxial Straight -- Receptacle 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 12,42 (.489) 9,68 (.381) 13,72 (.540) 6,91 (.272) 6,86 (.270) 4,14 (.163) Coax Contact 2,84 (.112) 2,54 (.100) 2,84 (.112) 3,96 (.156) 2,54 (.100) 2,84 (.112) Mounting Hole 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12(2.406) 61,12 (2.406) 20,70 (.815) 20,57 (.810) 20,70 (.815) 17,96 (.707) 20,57 (.810) 15,19 (.598) 13,72 (.540) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 3,96 (.156) 15,19 (.598) 12,42 (.489) 9,68 (.381) 12,42 (.489) 9,68 (.381) 6,91 (.272) 6,91 (.272) 8,28 (.326) Coax Contact 17,96 (.707) 8,28 (.326) Coax Contact 2,80 (.110) 2,54 (.100) 9,68 (.381) 6,91 (.272) 2,80 (.110) 2,54 (.100) 2,84 (.112) 2,54 (.100) 3,96 (.156) 2,84 (.112) 2,54 (.100) 2,84 (.112) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 13,82 (.544) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 16,56 (.652) 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 22,10 (.870) 8,28 (.326) 13,82 (.544) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) D 43W2 41 #20 2 #8 Reader's Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,84 (.112) Mounting Hole 5,54(.218) Mounting Hole D 47W1 46 #20 1 #8 Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type Coaxial (C or X) Recommended PCB Hole X 1,14 (.045) Resource Signal Contact X 0,60 (.024) 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 243 PCB Hole Pattern -- Standard High Power 90 -- Plug 25,00 (.984) 33,32 (1.312) 5,49 5,49 (.216) (.216) 6,86 (.270) Signal Contact 2,84 (.112) High Power Contact 6,86 (.270) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF Signal Contact 8,64 (.340) 11,53 (.454) E 5W1 4 #20 1 #8 REAR FLANGE REF 6,86 (.270) 11,53 (.454) REAR FLANGE REF REAR FLANGE REF A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 9,60 (.378) Mounting Hole 20,57 (.810) 5,49 (.216) 8,64 (.340) REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,84 (.112) High Power Contact 20,57 (.810) 8,64 (.340) 6,86 (.270) 2,74 (.108) Mounting Hole 20,57 (.810) High Power Contact Mounting Hole 33,32 (1.312) 6,86 (.270) 9,60 (.378) 14,48 (.570) 14,48 (.570) 6,86 (.270) 8,23 (.324) 2,84 (.112) High Power Contact Mounting Hole High Power Contact Signal Contact 0,86 (.034) 20,57 (.810) 5,49 (.216) 8,64 (.340) REAR FLANGE REF 8,23(.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,49 (.216) 7,67 (.302) Mounting Hole 5,94(.234) 11,53 (.454) 8,64 (.340) REAR FLANGE REF 8,23(.324) A 11W1 10 #20 1 #8 20,57 (.810) B 5W5 0 #20 5 #8 REAR FLANGE REF REAR FLANGE REF 47,04 (1.852) 14,48 (.570) 14,48 (.570) 47,04 (1.852) 8,28 (.326) 7,77 (.306) 14,48 (.570) 5,54(.218) 7,77 (.306) 14,48 (.570) 8,28 (.326) 5,54(.218) 2,84 (.112) High Power Contact High Power Contact Mounting Hole 11,53 (.454) 4,14 (.163) 6,91 (.272) Mounting Hole 2,80 (.110) Signal Contact 8,64 (.340) 11,53 (.454) 20,57 (.810) 4,14 (.163) Signal Contact 8,64 (.340) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 20,57 (.810) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,84 (.112) 5,54(.218) REAR FLANGE REF REAR FLANGE REF B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.852) 16,56 (.652) Resource 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 2,84 (.112) Mounting Hole High Power Contact 20,57 (.810) Reader's 8,28 (.326) 244 8,64 (.340) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 17W2 15 #20 2 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) REAR FLANGE REF 6,91 (.272) 11,53 (.454) 9,68 (.381) 12,42 (.489) 12,42 (.489) 15,19 (.598) REAR FLANGE REF 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard High Power 90 -- Plug 63,50 (2.500) 63,50 (2.500) 22,86 (.900) 22,56 (.888) 22,86 (.900) 24,84 (.978) 22,10 (.870) 15,82 (.623) 15,24 (.600) High Power Contact 16,51(.650) 19,33 (.761) High Power Contact 10,16 (.400) 8,89 (.350) 16,56 (.652) 9,09 (.358) Mounting Hole 2,54 3,81 (.100) (.150) 2,84 (.112) 4,37 (.172) 2,36 (.093) Mounting Hole 11,10 (.437) 20,57 (.810) 20,57 (.810) Signal Contact 8,64 (.340) 11,53 (.454) 8,64 (.340) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 11,05 (.435) 22,68 (.893) 15,70 (.618) High Power Contact 15,70 (.618) High Power Contact 8,71 (.343) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) Mounting Hole Mounting Hole 2,80 (.110) Signal Contact 2,80 (.110) 11,53 (.454) 8,28 (.326) Signal Contact 20,57 (.810) 8,64 (.340) 8,28 (.326) 11,53 (.454) 20,57 (.810) 8,64 (.340) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 6,91 (.272) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF C 17W5 12 #20 5 #8 C 21WA4 17 #20 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) 15,70 (.618) High Power Contact 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) Reader's 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) Signal Contact 2,84 (.112) Mounting Hole 2,80 (.110) 8,28 (.326) 11,53 (.454) 8,64 (.340) 20,57 (.810) 6,91 (.272) 9,68 (.381) 6,91 (.272) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 12,42 (.489) 15,19 (.598) 17,96 (.707) C 25W3 22 #20 3 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change 245 PCB Hole Pattern -- Standard High Power 90 -- Plug 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 15,19 (.598) 20,57 (.810) 20,57 (.810) 13,72 (.540) 13,72 (.540) High Power Contact 13,72 (.540) 6,86 (.270) 6,86 (.270) High Power Contact 12,42 (.489) 9,68 (.381) 6,86 (.270) 6,91 (.272) 4,14 (.163) 2,84 (.112) Signal Contact 20,57 (.810) Mounting Hole Mounting Hole Signal Contact 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 11,53 (.454) 8,28 (.326) 10,06 (.396) 20,57 (.810) 5,54(.218) 5,54(.218) 8,28 (.326) 13,82 (.544) 13,82 (.544) 16,56 (.652) REAR FLANGE REF 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 15,19 (.598) 20,57 (.810) 17,96 (.707) 20,57 (.810) 17,96 (.707) 15,19 (.598) 13,72 (.540) 15,19 (.598) 12,42 (.489) 12,42 (.489) 6,91 (.272) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) High Power Contact 6,91 (.272) 6,91 (.272) Signal Contact Mounting Hole Signal Contact 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5.54(.218) 11,53 (.454) 8,28 (.326) 5,54(.218) 5,54(.218) 11,53 (.454) 10,06 (.396) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) Resource 20,57 (.810) 8,28 (.326) 11,05 (.435) Reader's Mounting Hole 2,84 (.112) 2,84 (.112) 246 High Power Contact 6,91 (.272) 2,80 (.110) 2,80 (.110) 2,84 (.112) REAR FLANGE REF 19,33 (.761) 13,82 (.544) 19,33 (.761) D 43W2 41 #20 2 #8 REAR FLANGE REF 16,56 (.652) 19,33 (.761) 22,10 (.870) 22,10 (.870) 10,06 (.396) 11,05 (.435) 16,56 (.652) 19,33 (.761) 20,57 (.810) 8,28 (.326) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 9,68 (.381) 8,28 (.326) 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 16,56 (.652) 19,33 (.761) 19,33 (.761) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 13,82 (.544) 16,56 (.652) 16,56 (.652) 22,10 (.870) 11,05 (.435) 13,82 (.544) REAR FLANGE REF 11,53 (.454) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 10,06 (.396) 8,28 (.326) 22,10 (.870) D 47W1 46 #20 1 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard High Power 90 -- Receptacle 25,00 (.984) 33,32 (1.312) 33,32 (1.312) 5,49 5,49 (.216) (.216) 6,86 (.270) Signal Contact 6,86 (.270) 6,86 (.270) 2,84 (.112) High Power Contact 2,74 (.108) Mounting Hole Mounting Hole 20,57 (.810) High Power Contact 8,64 (.340) Signal Contact REAR FLANGE REF REAR FLANGE REF E 5W1 4 #20 1 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,49 (.216) 8,64 (.340) 8,64 (.340) 11,53 (.454) REAR FLANGE REF 2,84 (.112) High Power Contact 20,57 (.810) 8,23 (.324) 6,86 (.270) 20,57 (.810) 11,53 (.454) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Mounting Hole A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 8,23 (.324) 2,84 (.112) High Power Contact Mounting Hole Signal Contact 5,94 (.234) 20,57 (.810) 5,49 (.216) 8,64 (.340) 5,49 (.216) High Power Contact 0,86 (.034) Mounting Hole 7,67 (.302) 11,53 (.454) 8,64 (.340) 20,57 (.810) REAR FLANGE REF 8,23(.324) 8,23(.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF A 11W1 10 #20 1 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 5W5 0 #20 5 #8 47,04 (1.852) 14,48 (.570) 47,04 (1.852) 8,28 (.326) 14,48 (.570) 14,48 (.570) 5,54(.218) 7,77 (.306) 14,48 (.570) 8,28 (.326) 7,77 (.306) 5,54(.218) 2,84 (.112) High Power Contact Mounting Hole 4,14 (.163) Signal Contact 20,57 (.810) 2,84 (.112) Mounting Hole High Power Contact 2,80 (.110) 4,14 (.163) Signal Contact 11,53 (.454) 8,64 (.340) 6,91 (.272) 11,53 (.454) 8,64 (.340) 20,57 (.810) 6,91 (.272) 9,68 (.381) 9,68 (.381) REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact 2,84 (.112) Mounting Hole High Power Contact 20,57 (.810) 8,28 (.326) 8,64 (.340) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 6,91 (.272) 12,42 (.489) B 17W2 15 #20 2 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) REAR FLANGE REF 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change Resource 15,19 (.598) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 11,53 (.454) 9,68 (.381) Reader's 8,28 (.326) 247 PCB Hole Pattern -- Standard High Power 90 -- Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,86 (.900) 22,86 (.900) 22,56 (.888) 22,10 (.870) 15,82 (.623) 15,24 (.600) 16,51(.650) 10,16 (.400) 19,33 (.761) High Power Contact 8,89 (.350) 2,84 (.112) 3,81 2,54 (.150) (.100) High Power Contact 9,09 (.358) 16,56 (.652) 2,36 (.093) 4,37 (.172) Mounting Hole Mounting Hole 11,10 (.437) 20,57 (.810) 20,57 (.810) Signal Contact 8,64 (.340) 8,64 (.340) 11,53 (.454) 17,96 (.707) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 20.70 (.815) 23,47 (.924) C 8W8 0 #20 8 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 15,70 (.618) High Power Contact 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 8,71 (.343) 15,70 (.618) High Power Contact 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) 22,68 (.893) 15,70 (.618) 2,84 (.112) Mounting Hole Mounting Hole 20,57 (.810) 2,80 (.110) 2,80 (.110) Signal Contact Signal Contact 8,28 (.326) 11,53 (.454) 8,64 (.340) 9,68 (.381) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 11,53 (.454) 20,57 (.810) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF C 17W5 12 #20 5 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 8,64 (.340) C 21WA4 17 #20 4 #8 63,50 (2.500) 22,68 (.893) 22,68 (.893) 16,56 (.652) High Power Contact 15,70 (.618) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Reader's Resource 5,54(.218) 5,54(.218) 248 Mounting Hole 5,54(.218) 2,84 (.112) 2,80 (.110) 8,28 (.326) 20,57 (.810) 11,53(.454) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 6,91 (.272) Signal Contact 8,64 (.340) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 3 #8 Signal Contact X 0,76 (.030) Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard High Power 90 -- Receptacle 61,12 (2.406) 15,19 (.598) 20,57 (.810) 20,57 (.810) 13,72 (.540) 6,86 (.270) 13,72 (.540) 12,42 (.489) High Power Contact 13,72 (.540) 6,86 (.270) 20,57 (.810) 20,57 (.810) 61,12 (2.406) High Power Contact 9,68 (.381) 6,86 (.270) 6,91 (.272) 4,14 (.163) 2,84 (.112) Signal Contact 20,57 (.810) Signal Contact 2,84 (.112) Mounting Hole Mounting Hole 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 11,53 (.454) 8,28 (.326) 8,28 (.326) 19,33 (.761) 11,05 (.435) 13,82 (.544) 13,82 (.544) REAR FLANGE REF 16,56 (.652) 19,33 (.761) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF 16,56 (.652) 19,33 (.761) 22,10 (.870) D 24W7 17 #20 7 #8 REAR FLANGE REF 16,56 (.652) 19,33 (.761) 22,10 (.870) 10,06 (.396) 8,28 (.326) 8,28 (.326) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 20,57 (.810) 5,54(.218) 5,54(.218) 11,53 (.454) 11,05 (.435) 11,05 (.435) REAR FLANGE REF 10,06 (.396) 22,10 (.870) D 36W4 32 #20 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,57 (.810) 20,70 (.815) 20,57 (.810) 17,96 (.707) 15,19 (.598) 13,72 (.540) 15,19 (.598) 12,42 (.489) High Power Contact 9,68 (.381) 12,42 (.489) 9,68 (.381) High Power Contact 6,91 (.272) 9,68 (.381) 6,91 (.272) 6,91 (.272) 8,28 (.326) 8,28 (.326) 2,80 (.110) 2,80 (.110) Signal Contact Mounting Hole 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 17,96 (.707) 2,84 (.112) Mounting Hole Signal Contact 2,84 (.112) 2,84 (.112) 2,84 (.112) 5,54(.218) 20,57 (.810) 5,54(.218) 5,54(.218) 10,06 (.396) 8,28 (.326) 11,05 (.435) REAR FLANGE REF 11,53 (.454) 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 11,05 (.435) 13,82 (.544) 13,82 (.544) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) Reader's D 43W2 41 #20 2 #8 REAR FLANGE REF 16,56 (.652) 19,33 (.761) 19,33 (.761) 11,53 (.454) 8,28 (.326) 16,56 (.652) 16,56 (.652) 19,33 (.761) 8,28 (.326) 11,05 (.435) 13,82 (.544) 22,10 (.870) 5,54(.218) 5,54(.218) 20,57 (.810) 10,06 (.396) 11,05 (.435) 13,82 (.544) 16,56 (.652) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) D 47W1 46 #20 1 #8 Recommended PCB Hole X 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) Recommended PCB Hole X 3,56 (.140) Resource Signal Contact X 0,76 (.030) Dimensions are shown in mm (inch) Dimensions subject to change 249 PCB Hole Pattern -- European High Power 90 -- Plug 25,00 (.984) 5,49 (.216) Signal Contact 33,32 (1.312) 33,32 (1.312) 6,86 (.270) 6,86 (.270) 6,86 (.270) 6,86 (.270) 5,49 (.216) 2,54 (.100) High Power Contact Mounting Hole High Power Contact Mounting Hole Mounting Hole 2,74 (.108) 2,54 (.100) High Power Contact 10,90 (.429) 9,40 (.370) 8,23 (.324) 10,90 (.429) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 11,94 (.470) REAR FLANGE REF E 5W1 4 #20 1 #8 5,49 (.216) 10,90 (.429) REAR FLANGE REF Signal 9,40 (.370) Contact REAR FLANGE REF REAR FLANGE REF A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 7,67 (.302) 9,60 (.378) 5,94 (.234) 9,60 (.378) High Power Contact 6,86 (.270) 6,86 (.270) 8,23 (.324) Signal Contact 2,54 (.100) 0,86 (.034) High Power Contact 10,90 (.429) 5,49 5,49 (.216) (.216) 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 10,90 (.429) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF A 11W1 10 #20 1 #8 11,94 (.470) REAR FLANGE REF 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 7,77 (.306) 8,28 (.326) 8,28 (.326) High Power Contact 5,54(.218) Mounting Hole Signal Contact 10,90 (.429) 9,40 (.370) 4,14 (.163) 5,54(.218) 2,80 (.110) 10,90 (.429) 9,40 (.370) 11,94 (.470) REAR FLANGE REF REAR FLANGE REF B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.853) Resource 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) High Power Contact 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) 8,28 (.326) Signal Contact 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) 2,80 (.110) 10,90 (.429) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) Signal Contact High Power Contact 11,94 (.470) 10,90 (.429) 6,91 (.272) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 9,68 (.381) Reader's Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 17W2 15 #20 2 #8 Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (P) Recommended PCB Hole X 3,28 (.129) REAR FLANGE REF 12,42 (.489) 15,19 (.598) Signal Contact X 0,60 (.024) 9,40 (.370) 8,28 (.326) 6,91 (.272) 12,42 (.489) 250 11,94 (.470) REAR FLANGE REF 9,68 (.381) 47,04 (1,852) 13,82 (.544) Signal Contact 4,14 (.163) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 5,54(.218) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF B 5W5 0 #20 5 #8 47,04 (1.852) 14,48 (.570) High Power Contact Mounting Hole Mounting Hole 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European High Power 90 -- Plug 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,86 (.900) 19,33 (.761) 22,56 (.888) 22,86 (.900) 16,56 (.652) 15,82 (.623) 15,24 (.600) 16,51(.650) 8,89 (.350) High Power Contact 9,09 (.358) 10,16 (.400) 2,54 (.100) 3,81 (.150) High Power Contact Mounting Hole 11,10 (.437) 2,36 (.093) 4,37 (.172) Mounting Hole 2,54 (.100) 10,90 (.429) 11,94 (.470) 10,90 (.429) 11,94 (.470) REAR FLANGE REF 17,96 (.707) REAR FLANGE REF REAR FLANGE REF 9,40 (.370) Signal Contact 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 11,05 (.435) 8,71 (.343) 5,54(.218) Mounting Hole 5,54(.218) 10,90 (.429) Mounting Hole 11,94 (.470) REAR FLANGE REF 9,40 (.370) 8,28 (.326) Signal Contact 6,91 (.272) REAR FLANGE REF 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) 5,54(.218) 5,54(.218) 6,91 (.272) REAR FLANGE REF 8,28 (.326) 2,80 (.110) 9,40 (.370) 8,28 (.326) Signal Contact 11,05 (.435) 8,28 (.326) High Power Contact 11,94 (.470) 2,80 (.110) 10,90 (.429) 15,70 (.618) 11,05 (.435) 8,28 (.326) High Power Contact 22,68 (.893) 15,70 (.618) 6,91 (.272) C 17W5 12 #20 5 #8 REAR FLANGE REF 9,68 (.381) 9,68 (.381) C 21WA4 17 #20 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) Mounting Hole 6,91 (.272) REAR FLANGE REF 9,40 (.370) 8,28 (.326) 9,68 (.381) 8,28 (.326) High Power Contact 10,90 (.429) REAR FLANGE REF 9,68 (.381) 12,42 (.489) 12,42 (.489) 11,94 (.470) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF Mounting Hole 2,80 (.110) Signal Contact 6,91 (.272) 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 11,94 (.470) 2,80 (.110) Signal Contact 11,05 (.435) 6,91 (.272) 12,42 (.489) 15,19 (.598) 15,19 (.598) REAR FLANGE REF 9,68 (.381) 15,19 (.598) Reader's 5,54(.218) 5,54(.218) 5,54(.218) 10,90 (.429) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 16,56 (.652) 16,56 (.652) 16,56 (.652) 15,70 (.618) High Power Contact 22,68 (.893) 22,68 (.893) 17,96 (.707) C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (P) Recommended PCB Hole X 3,28 (.129) C 27W2 25 #20 2 #8 Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Dimensions are shown in mm (inch) Dimensions subject to change 251 PCB Hole Pattern -- European High Power 90 -- Receptacle 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 6,86 (.270) 6,86 (.270) 5,49 (.216) Signal Contact 5,49 (.216) 2,54 (.100) 6,86 (.270) 6,86 (.270) High Power Contact Mounting Hole High Power Contact Mounting Hole Mounting Hole 2,74 (.108) 2,54 (.100) High Power Contact 10,90 (.429) 10,90 (.429) 9,40 (.370) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 11,94 (.470) E 5W1 4 #20 1 #8 5,49 (.216) 10,90 (.429) REAR FLANGE REF Signal 9,40 (.370) Contact REAR FLANGE REF REAR FLANGE REF A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 9,60 (.378) 14,48 (.570) 14,48 (.570) 33,32 (1.312) 5,94 (.234) 9,60 (.378) 7,67 (.302) 6,86 (.270) 6,86 (.270) 8,23 (.324) Signal Contact 2,54 (.100) Mounting Hole High Power Contact 10,90 (.429) 5,49 5,49 (.216) (.216) 8,23 (.324) 8,23 (.324) 10,90 (.429) 9,40 (.370) 11,94 (.470) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF A 11W1 10 #20 1 #8 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 7,77 (.306) 8,28 (.326) 8,28 (.326) High Power Contact 5,54(.218) Mounting Hole 4,14 (.163) 9,40 (.370) 5,54(.218) 11,94 (.470) Signal Contact Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 9W4 5 #20 4 #8 REAR FLANGE REF 9,68 (.381) B 13W3 10 #20 3 #8 Resource 47,04 (1,852) Reader's 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) High Power Contact 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) Mounting Hole 11,05 (.435) 8,28 (.326) Signal Contact 8,28 (.326) 5,54(.218) 5,54(.218) 2,54 (.100) 2,80 (.110) 10,90 (.429) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 252 47,04 (1.853) 13,82 (.544) 13,82 (.544) 9,40 (.370) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 10,90 (.429) 2,80 (.110) 4,14 (.163) 6,91 (.272) REAR FLANGE REF High Power Contact 5,54(.218) Mounting Hole 10,90 (.429) Signal Contact REAR FLANGE REF B 5W5 0 #20 5 #8 47,04 (1.852) 14,48 (.570) 11,94 (.470) High Power Contact 0,86 (.034) Mounting Hole 9,68 (.381) Signal Contact High Power Contact 11,94 (.470) 10,90 (.429) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 17W2 15 #20 2 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (P) Recommended PCB Hole X 3,28 (.129) 9,40 (.370) 8,28 (.326) 6,91 (.272) 6,91 (.272) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European High Power 90 -- Receptacle 63,50 (2.500) 63,50 (2.500) 24,84 (.978) 22,10 (.870) 22,86 (.900) 22,86 (.900) 16,51(.650) 10,16 (.400) 22,56 (.888) 16,56 (.652) 8,89 (.350) 3,81 (.150) Mounting Hole 19,33 (.761) 15,24 (.600) 15,82 (.623) 9,09 (.358) 11,10 (.437) 2,54 (.100) High Power Contact 2,36 (.093) 4,37 (.172) High Power Contact Mounting Hole 2,54 (.100) 11,94 (.470) 10,90 (.429) 9,40 (.370) REAR FLANGE REF 11,94 (.470) Signal Contact REAR FLANGE REF 10,90 (.429) REAR FLANGE REF 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 8,71 (.343) 11,05 (.435) High Power Contact 5,54(.218) Signal Contact 10,90 (.429) REAR FLANGE REF 6,91 (.272) C 21WA4 17 #20 4 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 16,56 (.652) 22,68 (.893) 13,82 (.544) 11,05 (.435) 11,05 (.435) High Power Contact 8,28 (.326) High Power Contact 6,91 (.272) 10,90 (.429) Signal Contact 10,90 (.429) REAR FLANGE REF 12,42 (.489) 9,68 (.381) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 12,42 (.489) 15,19 (.598) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 11,94 (.470) 2,80 (.110) Signal Contact 6,91 (.272) 9,68 (.381) Mounting Hole 5,54(.218) 2,80 (.110) 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 12,42 (.489) 15,19 (.598) Reader's 8,28 (.326) 5,54(.218) 5,54(.218) REAR FLANGE REF 13,82 (.544) 13,82 (.544) 8,28 (.326) 9,40 (.370) 16,56 (.652) 16,56 (.652) 15,70 (.618) 11,05 (.435) REAR FLANGE REF 9,68 (.381) 9,68 (.381) C 17W5 12 #20 5 #8 11,94 (.470) 9,40 (.370) 8,28 (.326) Signal Contact 6,91 (.272) REAR FLANGE REF 9,68 (.381) Mounting Hole 11,94 (.470) 2,80 (.110) 10,90 (.429) 6,91 (.272) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 5,54(.218) 8,28 (.326) REAR FLANGE REF 8,28 (.326) 5,54(.218) 5,54(.218) 2,80 (.110) 9,40 (.370) 11,05 (.435) 8,28 (.326) High Power Contact 5,54(.218) 11,94 (.470) 15,70 (.618) 11,05 (.435) 8,28 (.326) Mounting Hole 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,19 (.598) 17,96 (.707) C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (P) Recommended PCB Hole X 3,28 (.129) Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change 253 PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Plug 33,32 (1.312) 33,32 (1.312) 25,00 (.984) Signal Contact 5,49 (.216) 6,86 (.270) 5,49 (.216) 6,86 (.270) 2,84 (.112) Mounting Hole 2,74 (.108) Mounting Hole High Power/ High Voltage Contact 6,86 (.270) 6,86 (.270) High Power/ High Voltage Contact Mounting Hole Signal Contact High Power/ High Voltage Contact 2,84 (.112) 5,49 (.216) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 1 #8 A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 7,67 (.302) 5,94 (.234) 8,23 (.324) 0,86 (.034) 2,84 (.112) Mounting Hole Signal Contact 5,49 (.216) 5,49 (.216) High Power/ High Voltage Contact Mounting Hole High Power/ High Voltage Contact 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 7,77 (.306) 14,48 (.570) 7,77 (.306) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) Mounting Hole High Power/ High Voltage Contact 4,14 (.163) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 2,84 (.112) 2,80 (.110) Mounting Hole Signal Contact High Power/ 4,14 (.163) High Voltage Contact Signal Contact B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 Resource 47,04 (1.852) 47,04 (1.852) 13,82 (.544) Reader's 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) Mounting Hole Signal Contact 6,91 (.272) 9,68 (.381) B 17W2 15 #20 2 #8 11,05 (.435) 8,28 (.326) Signal Contact 2,84 (.112) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) High Power/ High Voltage Contact Mounting Hole 8,28 (.326) 8,28 (.326) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities High Power/ High Voltage Contact 2,80 (.110) 6,91 (.272) 254 16,56 (.652) 16,56 (.652) 13,82 (.544) Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) 6,91 (.272) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Plug 63,50 (2.500) 63.50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,51(.650) 15,24 (.600) 8,89 (.350) High Power/ High Voltage Contact 22,56 (.888) 15,82 (.623) 10,16 (.400) 2,54 (.100) 16,56 (.652) Mounting Hole 3,81 (.150) 9,09 (.358) High Power/ High Voltage Contact 11,10 (.437) 2,36 (.093) 4,37 (.172) 2,84 (.112) Signal Contact Mounting Hole 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 22,68 (.893) 15,70 (.618) 15,70 (.618) 15,70 (.618) 11,05 (.435) 15,70 (.618) 11,05 (.435) 8,71 (.343) 8,28 (.326) High Power/ High Voltage Contact 22,68 (.893) 5,54(.218) 2,84 (.112) 5,54(.218) 8,28 (.326) High Power/ High Voltage Contact Signal Contact 2,80 (.110) Signal Contact 8,28 (.326) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) C 17W5 12 #20 5 #8 22,68 (.893) 22,68 (.893) 16,56 (.652) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) 5,54(.218) High Power/ High Voltage Contact Signal Contact 9,68 (.381) 5,54(.218) 6,91 (.272) 15,19 (.598) 17,96 (.707) 8,28 (.326) 6,91 (.272) 9,68 (.381) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) 12,42 (.489) 15,19 (.598) 15,19 (.598) Resource C 25W3 22 #20 3 #8 2,84 (.112) 2,80 (.110) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 8,28 (.326) 6,91 (.272) 11,05 (.435) 8,28 (.326) Signal Contact 2,80 (.110) Mounting Hole 13,82 (.544) 13,82 (.544) 11,05 (.435) Reader's High Power/ High Voltage Contact 22,68 (.893) 16,56 (.652) 16,56 (.652) 13,82 (.544) 8,28 (.326) 9,68 (.381) 63,50 (2.500) 22,68 (.893) 11,05 (.435) 6,91 (.272) C 21WA4 17 #20 4 #8 63,50 (2.500) 15,70 (.618) 2,84 (.112) 5,54(.218) Mounting Hole 8,28 (.326) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 5,54(.218) 5,54(.218) 2,80 (.110) Mounting Hole 11,05 (.435) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change 255 PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Plug 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 13,72 (.540) 12,42 (.489) 13,72 (.540) 6,86 (.270) 9,68 (.381) High Power/ High Voltage Contact 6,86 (.270) 6,86 (.270) 6,91 (.272) High Power/ High Voltage Contact 4,14 (.163) Mounting Hole Mounting Hole 2,84 (.112) 2,84 (.112) 1,42 (.056) 1,42 (.056) 2,84 (.112) 2,84 (.112) 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 22,10 (.870) D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 20,57 (.810) 17,96 (.707) 15,19 (.598) 15,19 (.598) 6,91 (.272) 9,68 (.381) 6,91 (.272) 6,91 (.272) High Power/ High Voltage Contact 2,84 (.112) 9,68 (.381) 6,91 (.272) High Power/ High Voltage Contact 8,28 (.326) Mounting Hole 2,80 (.110) 1,42 (.056) 2,84 (.112) Mounting Hole 2,80 (.110) 2,84 (.112) 1,42 (.056) 2,84 (.112) 5,54(.218) 5,54(.218) Signal Contact Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) D 43W2 41 #20 2 #8 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 16,56 (.652) 8,28 (.326) 11,05 (.435) 13,82 (.544) 13,82 (.544) Resource 12,42 (.489) 9,68 (.381) 8,28 (.326) Reader's 15,19 (.598) 12,42 (.489) 9,68 (.381) 256 20,57 (.810) 17,96 (.707) 13,72 (.540) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) Signal Contact D 47W1 46 #20 1 #8 Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Receptacle 33,32 (1.312) 33,32 (1.312) 25,00 (.984) 6,86 (.270) Signal Contact 5,49 (.216) 6,86 (.270) 5,49 (.216) 2,84 (.112) Mounting Hole 6,86 (.270) High Power/ High Voltage Contact Mounting Hole High Power/ High Voltage Contact 6,86 (.270) 2,74 (.108) Mounting Hole High Power/ High Voltage Contact 2,84 (.112) 5,49 (.216) Signal Contact 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 1 #8 A 3W3 0 #20 3 #8 A 7W2 5 #20 2 #8 47,04 (1.852) 33,32 (1.312) 14,48 (.570) 9,60 (.378) 9,60 (.378) 6,86 (.270) 6,86 (.270) 14,48 (.570) 7,67 (.302) 5,94 (.234) 8,23 (.324) 2,84 (.112) Mounting Hole 5,49 (.216) Signal Contact 5,49 (.216) 0,86 (.034) High Power/ High Voltage Contact Mounting Hole High Power/ High Voltage Contact 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities A 11W1 10 #20 1 #8 B 5W5 0 #20 5 #8 47,04 (1.852) 47,04 (1.852) 14,48 (.570) 14,48 (.570) 14,48 (.570) 8,28 (.326) 7,77 (.306) 14,48 (.570) 8,28 (.326) 7,77 (.306) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) 2,80 (.110) Signal Contact 4,14 (.163) High Power/ High Voltage Contact Mounting Hole 4,14 (.163) Mounting Hole Signal Contact High Power/ High Voltage Contact 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 9W4 5 #20 4 #8 B 13W3 10 #20 3 #8 47,04 (1.852) 47,04 (1.852) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) High Power/ High Voltage Contact 5,54(.218) Mounting Hole Signal Contact Signal Contact 2,84 (.112) 2,80 (.110) 6,91 (.272) 6,91 (.272) 9,68 (.381) 2,84 (.112) High Power/ High Voltage Contact Mounting Hole 8,28 (.326) Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) 6,91 (.272) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) Resource B 17W2 15 #20 2 #8 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 8,28 (.326) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) Reader's 16,56 (.652) 16,56 (.652) 13,82 (.544) 12,42 (.489) 15,19 (.598) 15,19 (.598) B 21W1 20 #20 1 #8 Dimensions are shown in mm (inch) Dimensions subject to change 257 PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Receptacle 63,50 (2.500) 63.50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 22,86 (.900) 22,86 (.900) 16,51(.650) 10,16 (.400) Mounting Hole 16,56 (.652) 22,56 (.888) 15,24 (.600) 15,82 (.623) 8,89 (.350) 3,81 (.150) 11,10 (.437) High Power/ High Voltage Contact 2,54 (.100) 9,09 (.358) 4,37 (.172) High Power/ High Voltage Contact 2,36 (.093) 2,84 (.112) Mounting Hole Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 8W8 0 #20 8 #8 C 13W6 7 #20 6 #8 63,50 (2.500) 63,50 (2.500) 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 15,70 (.618) 8,71 (.343) 15,70 (.618) 11,05 (.435) 8,28 (.326) High Power/ High Voltage Contact Signal Contact 8,28 (.326) Mounting Hole 8,28 (.326) 6,91 (.272) 9,68 (.381) 9,68 (.381) C 17W5 12 #20 5 #8 22,68 (.893) 22,68 (.893) 15,70 (.618) 22,68 (.893) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 11,05 (.435) 11,05 (.435) 8,28 (.326) High Power/ High Voltage Contact 5,54(.218) 5,54(.218) Resource 9,68 (.381) 63,50 (2.500) 22,68 (.893) Reader's 6,91 (.272) C 21WA4 17 #20 4 #8 63,50 (2.500) 258 2,84 (.112) 2,80 (.110) Signal Contact Mounting Hole 6,91 (.272) 2,84 (.112) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,80 (.110) 16,56 (.652) 11,05 (.435) 8,28 (.326) High Power/ High Voltage Contact 5,54(.218) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 15,70 (.618) 11,05 (.435) 5,54(.218) 2,84 (.112) 22,68 (.893) High Power/ High Voltage Contact 5,54(.218) 8,28 (.326) Signal Contact 5,54(.218) 2,80 (.110) 8,28 (.326) 6,91 (.272) 9,68 (.381) 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) 2,80 (.110) Signal Contact Mounting Hole Mounting Hole 6,91 (.272) 8,28 (.326) 6,91 (.272) 9,68 (.381) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 3 #8 Signal Contact X 0,60 (.024) 0,76 (.030) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) C 27W2 25 #20 2 #8 Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European High Power/Voltage Straight -- Receptacle 61,12 (2.406) 61,12 (2.406) 20,57 (.810) 20,57 (.810) 20,57 (.810) 20,57 (.810) 15,19 (.598) 13,72 (.540) 6,86 (.270) 13,72 (.540) 12,42 (.489) 13,72 (.540) 9,68 (.381) High Power/ High Voltage Contact 6,86 (.270) 6,91 (.272) 6,86 (.270) High Power/ High Voltage Contact 4,14 (.163) Mounting Hole 2,84 (.112) 2,84 (.112) 1,42 (.056) Mounting Hole 1,42 (.056) 2,84 (.112) 2,84 (.112) 5,54(.218) 8,28 (.326) 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 8,28 (.326) 11,05 (.435) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 16,56 (.652) 19,33 (.761) 22,10 (.870) 22,10 (.870) 13,82 (.544) 16,56 (.652) 19,33 (.761) 19,33 (.761) 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 8,28 (.326) 11,05 (.435) 13,82 (.544) 13,82 (.544) Signal Contact 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 19,33 (.761) 22,10 (.870) 22,10 (.870) D 24W7 17 #20 7 #8 D 36W4 32 #20 4 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,57 (.810) 20,70 (.815) 17,96 (.707) 15,19 (.598) 13,72 (.540) 9,68 (.381) 6,91 (.272) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 6,91 (.272) 6,91 (.272) High Power/ High Voltage Contact 8,28 (.326) Mounting Hole 15,19 (.598) 15,19 (.598) 12,42 (.489) High Power/ High Voltage Contact 17,96 (.707) 20,57 (.810) 8,28 (.326) Mounting Hole 2,80 (.110) 9,68 (.381) 6,91 (.272) 2,80 (.110) 2,84 (.112) 1,42 (.056) 2,84 (.112) 1,42 (.056) 2,84 (.112) 5,54(.218) Signal Contact 2,84 (.112) 5,54(.218) Signal Contact 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 22,10 (.870) 22,10 (.870) 30,56 (1.203) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities D 43W2 41 #20 2 #8 D 47W1 46 #20 1 #8 Recommended PCB Hole X 1,00 (.039) 1,14 (.045) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Size 8 Contact Type High Power (H) High Voltage (V) Recommended PCB Hole X 3,56 (.140) 1,96 (.077) Resource Signal Contact X 0,60 (.024) 0,76 (.030) Reader's 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 13,82 (.544) 16,56 (.652) 19,33 (.761) 19,33 (.761) 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 8,28 (.326) Dimensions are shown in mm (inch) Dimensions subject to change 259 PCB Hole Pattern -- European 90 PC Tails -- Plug 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 9,60 (.378) 5,49(.216) 5,49(.216) Signal Contact Mounting Hole 6,86 (.270) 8,23 (.324) Signal Contact 2,74 (.108) 2,54(.100) 9,60 (.378) 6,86 (.270) Mounting Hole Mounting Hole 2,54(.100) 2,54 (.100) 10,90 (.429) 10,90 (.429) 9,40 (.370) 8,23 (.324) 5,49(.216) Signal Contact 9,40 (.370) 9,40 (.370) 10,90 (.429) 5,49(.216) 5,49(.216) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF E 5W1 4 #20 0 #8 A 7W2 5 #20 0 #8 A 11W1 10 #20 0 #8 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) 2,54 (.100) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,68 (.381) B 9W4 5 #20 0 #8 B 13W3 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) Mounting Hole Reader's Resource 5,54(.218) 5,54(.218) 260 Signal Contact 4,14 (.163) 9,40 (.370) 6,91 (.272) REAR FLANGE REF 2,54 (.100) 2,80 (.110) 10,90 (.429) Signal Contact 4,14 (.163) Mounting Hole 5,54(.218) Mounting Hole 5,54(.218) 9,40 (.370) REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF 47,04 (1.852) 10,90 (.429) 8,23 (.324) 5,54(.218) Signal Contact 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) 2,54 (.100) 2,54 (.100) 10,90 (.429) Signal Contact 2,80 (.110) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 10,90 (.429) 9,40 (.370) 6,91 (.272) 9,68 (.381) 6,91 (.272) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 12,42 (.489) 15,19 (.598) B 17W2 15 #20 0 #8 REAR FLANGE REF 9,68 (.381) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 9,40 (.370) 8,28 (.326) 15,19 (.598) B 21W1 20 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European 90 PC Tails -- Plug 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) Mounting Hole 2,54(.100) 10,90 (.429) Signal Contact 17,96 (.707) REAR FLANGE REF 9,40 (.370) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 13W6 7 #20 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 5,54(.218) Mounting Hole 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) 8,28 (.326) 5,54(.218) 2,54 (.100) 2,54 (.100) 2,80 (.110) 2,80 (.110) 10,90 (.429) Signal Contact 8,28 (.326) 10,90 (.429) 9,40 (.370) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF REAR FLANGE REF C 17W5 12 #20 0 #8 9,68 (.381) 9,40 (.370) 6,91 (.272) 9,68 (.381) REAR FLANGE REF C 21WA4 17 #20 0 #8 C 27W2 25 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource C 25W3 22 #20 0 #8 Reader's Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 9,68 (.381) 8,28 (.326) 6,91 (.272) 6,91 (.272) REAR FLANGE REF Signal Contact Dimensions are shown in mm (inch) Dimensions subject to change 261 PCB Hole Pattern -- European 90 PC Tails -- Plug 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 4,14 (.163) 2,84 (.112) Mounting Hole Signal Contact 2,54 (.100) 2,54 (.100) 12,27 (.483) 9,40 (.370) 5,54(.218) 5,54(.218) 5,54(.218) 9,40 (.370) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) REAR FLANGE REF 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF 13,82 (.544) D 24W7 17 #20 0 #8 D 36W4 32 #20 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 15,19 (.598) 12,42 (.489) 12,42 (.489) 9,68 (.381) 9,68 (.381) 9,68 (.381) 6,91 (.272) 12,42 (.489) 6,91 (.272) 6,91 (.272) 8,28 (.326) 8,28 (.326) Mounting Hole 2,80 (.110) 9,68 (.381) 6,91 (.272) Signal Contact Mounting Hole 2,80 (.110) Signal Contact 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 12,27 (.483) 5,54(.218) 9,40 (.370) 8,28 (.326) REAR FLANGE REF 11,05 (.435) Reader's Resource 13,82 (.544) 5,54(.218) 5,54(.218) 262 11,05 (.435) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 19,33 (.761) 11,05 (.435) 8,28 (.326) 11,05 (.435) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) D 43W2 41 #20 0 #8 REAR FLANGE REF 13,82 (.544) 13,82 (.544) 16,56 (.652) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 8,28 (.326) 16,56 (.652) 12,27 (.483) 5,54(.218) 9,40 (.370) 5,54(.218) 5,54(.218) 22,10 (.870) D 47W1 46 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European 90 PC Tails -- Receptacle 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 9,60 (.378) Signal Contact 5,49(.216) 5,49(.216) 6,86 (.270) Mounting Hole Mounting Hole 8,23 (.324) Signal Contact 2,74 (.108) 2,54(.100) 9,60 (.378) 6,86 (.270) Mounting Hole 2,54(.100) 2,54 (.100) 10,90 (.429) 10,90 (.429) 9,40 (.370) 8,23 (.324) 5,49(.216) Signal Contact 9,40 (.370) 9,40 (.370) 10,90 (.429) 5,49(.216) 5,49(.216) 8,23 (.324) REAR FLANGE REF REAR FLANGE REF Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF E 5W1 4 #20 0 #8 REAR FLANGE REF REAR FLANGE REF REAR FLANGE REF A 7W2 5 #20 0 #8 A 11W1 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) Mounting Hole Mounting Hole 5,54(.218) 2,54 (.100) 5,54(.218) 5,54(.218) 2,54 (.100) Signal Contact 2,80 (.110) Signal Contact 10,90 (.429) 4,14 (.163) 9,40 (.370) REAR FLANGE REF B 13W3 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) 5,54(.218) 9,40 (.370) 6,91 (.272) 9,68 (.381) REAR FLANGE REF B 9W4 5 #20 0 #8 8,28 (.326) 10,90 (.429) 4,14 (.163) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,23 (.324) 8,28 (.326) Signal Contact 8,28 (.326) Mounting Hole 5,54(.218) 5,54(.218) 2,54 (.100) 10,90 (.429) Signal Contact 2,80 (.110) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9,40 (.370) 10,90 (.429) 6,91 (.272) 9,68 (.381) REAR FLANGE REF REAR FLANGE REF 9,68 (.381) 6,91 (.272) 12,42 (.489) 15,19 (.598) B 17W2 15 #20 0 #8 REAR FLANGE REF 9,68 (.381) 12,42 (.489) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 9,40 (.370) 8,28 (.326) 6,91 (.272) 15,19 (.598) B 21W1 20 #20 0 #8 Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Signal Contact X 0,60 (.024) Reader's 2,54 (.100) Dimensions are shown in mm (inch) Dimensions subject to change 263 PCB Hole Pattern -- European 90 PC Tails -- Receptacle 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) Mounting Hole 2,54(.100) 9,40 (.370) REAR FLANGE REF 10,90 (.429) Signal Contact 17,96 (.707) REAR FLANGE REF 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 13W6 7 #20 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) 2,80 (.110) 9,40 (.370) 10,90 (.429) Signal Contact 10,90 (.429) 6,91 (.272) Signal Contact 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) REAR FLANGE REF C 17W5 12 #20 0 #8 Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Mounting Hole 2,54 (.100) 2,80 (.110) 8,28 (.326) REAR FLANGE REF 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,54 (.100) 11,05 (.435) 8,28 (.326) 5,54(.218) 9,68 (.381) 9,40 (.370) 6,91 (.272) 9,68 (.381) REAR FLANGE REF C 21WA4 17 #20 0 #8 63,50 (2.500) 16,56 (.652) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) Mounting Hole 5,54(.218) Reader's Resource 2,54 (.100) 264 8,28 (.326) 5,54(.218) 5,54(.218) 2,80 (.110) 9,40 (.370) 8,28 (.326) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 10,90 (.429) Signal Contact 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 0 #8 C 27W2 25 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European 90 PC Tails -- Receptacle 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 4,14 (.163) 2,84 (.112) Mounting Hole Signal Contact 2,54 (.100) 2,54 (.100) 9,40 (.370) 12,27 (.483) 5,54(.218) 9,40 (.370) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 11,05 (.435) REAR FLANGE REF 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities REAR FLANGE REF 13,82 (.544) D 24W7 17 #20 0 #8 D 36W4 32 #20 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 9,68 (.381) 6,91 (.272) Mounting Hole 2,80 (.110) 5,54(.218) 8,28 (.326) 2,80 (.110) 2,54 (.100) 2,54 (.100) 2,54 (.100) 2,54 (.100) 12,27 (.483) 9,40 (.370) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) REAR FLANGE REF 11,05 (.435) REAR FLANGE REF REAR FLANGE REF 13,82 (.544) 11,05 (.435) 19,33 (.761) 16,56 (.652) 19,33 (.761) 22,10 (.870) 19,33 (.761) 22,10 (.870) D 43W2 41 #20 0 #8 REAR FLANGE REF 13,82 (.544) 16,56 (.652) 22,10 (.870) D 47W1 46 #20 0 #8 Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Signal Contact X 0,60 (.024) Reader's 19,33 (.761) 11,05 (.435) 8,28 (.326) 13,82 (.544) 16,56 (.652) 22,10 (.870) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 11,05 (.435) 16,56 (.652) 9,40 (.370) 5,54(.218) 5,54(.218) 8,28 (.326) 13,82 (.544) 9,68 (.381) 6,91 (.272) Signal Contact Signal Contact 12,27 (.483) 12,42 (.489) 9,68 (.381) 6,91 (.272) 8,28 (.326) Mounting Hole 15,19 (.598) 12,42 (.489) Dimensions are shown in mm (inch) Dimensions subject to change 265 PCB Hole Pattern -- Standard/European Straight PC Tails -- Plug 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 9,60 (.378) Signal Contact 5,49 (.216) 6,86 (.270) 5,49 (.216) Mounting Hole 2,84 (.112) 2,74 (.108) Signal Contact Mounting Hole 2,84 (.112) Mounting Hole 9,60 (.378) 6,86 (.270) 8,23 (.324) 2,84 (.112) Signal Contact 5,49(.216) 8,23 (.324) 5,49 (.216) 5,49 (.216) 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 0 #8 A 7W2 5 #20 0 #8 A 11W1 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole Mounting Hole 4,14 (.163) 2,84 (.112) 5,54(.218) 2,84 (.112) Signal Contact Signal Contact 2,80 (.110) 4,14 (.163) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 9W4 5 #20 0 #8 B 13W3 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 8,28 (.326) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) Reader's Resource 5,54(.218) 266 Mounting Hole Signal Contact Signal Contact 2,84 (.112) 2,84 (.112) 2,80 (.110) Mounting Hole 8,28 (.326) 8,28 (.326) 6,91 (.272) 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) 12,42 (.489) 15,19 (.598) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities B 17W2 15 #20 0 #8 15,19 (.598) B 21W1 20 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European Straight PC Tails -- Plug 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) 16,56 (.652) Mounting Hole 2,84 (.112) Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 13W6 7 #20 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 8,28 (.326) Signal Contact 5,54(.218) 2,84 (.112) 2,80 (.110) 2,84 (.112) 2,80 (.110) Mounting Hole 8,28 (.326) Signal Contact 6,91 (.272) 8,28 (.326) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) Mounting Hole 11,05 (.435) 8,28 (.326) 5,54(.218) 9,68 (.381) C 17W5 12 #20 0 #8 6,91 (.272) 9,68 (.381) C 21WA4 17 #20 0 #8 63,50 (2.500) 63,50 (2.500) 16,56 (.652) 8,28 (.326) 8,28 (.326) Signal Contact 5,54(.218) 5,54(.218) 2,80 (.110) Mounting Hole 8,28 (.326) 6,91 (.272) 9,68 (.381) 2,84 (.112) 5,54(.218) 2,84 (.112) 2,80 (.110) Signal Contact 8,28 (.326) 8,28 (.326) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) 15,19 (.598) Reader's 5,54(.218) 5,54(.218) Mounting Hole 11,05 (.435) 11,05 (.435) 8,28 (.326) 5,54(.218) 13,82 (.544) 13,82 (.544) 11,05 (.435) 11,05 (.435) 16,56 (.652) 16,56 (.652) 13,82 (.544) 17,96 (.707) C 25W3 22 #20 0 #8 C 27W2 25 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Dimensions are shown in mm (inch) Dimensions subject to change 267 PCB Hole Pattern -- Standard/European Straight PC Tails -- Plug 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 4,14 (.163) 61,12 (2.406) Mounting Hole Mounting Hole 2,84 (.112) 2,84 (.112) Signal Contact 2,84 (.112) Signal Contact 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 16,56 (.652) 19,33 (.761) 22,10 (.870) 22,10 (.870) 13,82 (.544) 16,56 (.652) 19,33 (.761) 19,33 (.761) 11,05 (.435) 13,82 (.544) 16,56 (.652) 16,56 (.652) 8,28 (.326) 11,05 (.435) 19,33 (.761) 22,10 (.870) 22,10 (.870) D 24W7 17 #20 0 #8 D 36W4 32 #20 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 15,19 (.598) 12,42 (.489) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 9,68 (.381) 12,42 (.489) 9,68 (.381) 6,91 (.272) 6,91 (.272) 8,28 (.326) 8,28 (.326) Mounting Hole 2,80 (.110) 9,68 (.381) 6,91 (.272) Mounting Hole 2,80 (.110) Signal Contact 2,84 (.112) 2,84 (.112) 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 8,28 (.326) Resource Reader's 11,05 (.435) 13,82 (.544) 13,82 (.544) 16,56 (.652) 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 11,05 (.435) 16,56 (.652) 19,33 (.761) 19,33 (.761) 8,28 (.326) 13,82 (.544) 16,56 (.652) 16,56 (.652) 268 8,28 (.326) 11,05 (.435) 13,82 (.544) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Signal Contact 22,10 (.870) 22,10 (.870) D 43W2 41 #20 0 #8 D 47W1 46 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European Straight PC Tails -- Receptacle 33,32 (1.312) 25,00 (.984) 33,32 (1.312) 9,60 (.378) 9,60 (.378) Signal Contact 5,49 (.216) 6,86 (.270) 5,49 (.216) Mounting Hole 2,84 (.112) Signal Contact Mounting Hole 2,84 (.112) 2,74 (.108) Mounting Hole 6,86 (.270) 8,23 (.324) 2,84 (.112) Signal Contact 5,49(.216) 8,23 (.324) 5,49 (.216) 5,49 (.216) 8,23 (.324) 8,23 (.324) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities E 5W1 4 #20 0 #8 A 7W2 5 #20 0 #8 A 11W1 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 8,28 (.326) 8,28 (.326) 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) 4,14 (.163) Signal Contact 2,80 (.110) Mounting Hole Signal Contact Mounting Hole 4,14 (.163) 6,91 (.272) 6,91 (.272) 9,68 (.381) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) 9,68 (.381) B 9W4 5 #20 0 #8 B 13W3 10 #20 0 #8 47,04 (1.852) 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) Mounting Hole Signal Contact Signal Contact 5,54(.218) 5,54(.218) 2,84 (.112) 2,84 (.112) 2,80 (.110) Mounting Hole 8,28 (.326) 8,28 (.326) 6,91 (.272) 9,68 (.381) 8,28 (.326) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) B 17W2 15 #20 0 #8 15,19 (.598) B 21W1 20 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities Reader's 5,54(.218) 5,54(.218) 5,54(.218) 11,05 (.435) 8,28 (.326) Dimensions are shown in mm (inch) Dimensions subject to change 269 PCB Hole Pattern -- Standard/European Straight PC Tails -- Receptacle 63,50 (2.500) 24,84 (.978) 22,10 (.870) 19,33 (.761) Mounting Hole 2,84 (.112) 16,56 (.652) Signal Contact 17,96 (.707) 20.70 (.815) 23,47 (.924) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 13W6 7 #20 0 #8 63,50 (2.500) 63,50 (2.500) 11,05 (.435) 11,05 (.435) 8,28 (.326) 2,80 (.110) 5,54(.218) Signal Contact 8,28 (.326) Mounting Hole Signal Contact 9,68 (.381) 9,68 (.381) C 21WA4 17 #20 0 #8 63,50 (2.500) 63,50 (2.500) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) 8,28 (.326) Signal Contact 5,54(.218) 5,54(.218) 6,91 (.272) 2,84 (.112) 5,54(.218) 2,80 (.110) 2,80 (.110) Signal Contact Mounting Hole Mounting Hole 8,28 (.326) 6,91 (.272) 6,91 (.272) 6,91 (.272) 9,68 (.381) 9,68 (.381) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 8,28 (.326) 2,84 (.112) 16,56 (.652) 16,56 (.652) 13,82 (.544) Resource 6,91 (.272) C 17W5 12 #20 0 #8 16,56 (.652) Reader's 8,28 (.326) 6,91 (.272) 9,68 (.381) 270 2,84 (.112) 2,80 (.110) Mounting Hole 6,91 (.272) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) 11,05 (.435) 8,28 (.326) 5,54(.218) 9,68 (.381) 9,68 (.381) 12,42 (.489) 12,42 (.489) 12,42 (.489) 15,19 (.598) 15,19 (.598) 15,19 (.598) 17,96 (.707) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities C 25W3 22 #20 0 #8 C 27W2 25 #20 0 #8 Signal Contact X 0,60 (.024) Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- Standard/European Straight PC Tails -- Receptacle 61,12 (2.406) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 4,14 (.163) 61,12 (2.406) Mounting Hole 2,80 (.110) Mounting Hole 2,84 (.112) 2,84 (.112) Signal Contact Signal Contact 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 8,28 (.326) 8,28 (.326) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 19,33 (.761) 22,10 (.870) 22,10 (.870) 22,10 (.870) 16,56 (.652) 19,33 (.761) 19,33 (.761) 19,33 (.761) 13,82 (.544) 16,56 (.652) 16,56 (.652) 16,56 (.652) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 8,28 (.326) 11,05 (.435) 11,05 (.435) 11,05 (.435) 22,10 (.870) D 24W7 17 #20 0 #8 D 36W4 32 #20 0 #8 61,12 (2.406) 61,12 (2.406) 20,70 (.815) 20,70 (.815) 17,96 (.707) 17,96 (.707) 15,19 (.598) 9,68 (.381) 12,42 (.489) 12,42 (.489) 9,68 (.381) 6,91 (.272) 15,19 (.598) 15,19 (.598) 12,42 (.489) 9,68 (.381) 6,91 (.272) 8,28 (.326) Mounting Hole 9,68 (.381) 6,91 (.272) 6,91 (.272) 8,28 (.326) Mounting Hole 2,80 (.110) 2,84 (.112) 2,80 (.110) Signal Contact 2,84 (.112) 2,84 (.112) 2,84 (.112) 5,54(.218) 5,54(.218) 5,54(.218) 5,54(.218) 8,28 (.326) 11,05 (.435) 8,28 (.326) 11,05 (.435) 11,05 (.435) 13,82 (.544) 13,82 (.544) 13,82 (.544) 16,56 (.652) 22,10 (.870) 22,10 (.870) D 43W2 41 #20 0 #8 D 47W1 46 #20 0 #8 Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Signal Contact X 0,60 (.024) Reader's 19,33 (.761) 19,33 (.761) 22,10 (.870) 22,10 (.870) 11,05 (.435) 16,56 (.652) 19,33 (.761) 19,33 (.761) 8,28 (.326) 13,82 (.544) 16,56 (.652) 16,56 (.652) Shell Size Contact Arrangement No. of Size 20 Cavities No. of Size 8 Cavities 5,54(.218) 5,54(.218) 8,28 (.326) Dimensions are shown in mm (inch) Dimensions subject to change 271 PCB Hole Pattern -- Standard 90 -- Plug & Receptacle 63,50 (2.500) 24,84 (.978) 24,84 (.978) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 25,00 (.984) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) Signal Contact 5,49 (.216) 5,49 (.216) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact Mounting Hole 5,49(.216) 11,05 (.435) Mounting Hole 5,54(.218) 2,84 (.112) 8,64 (.340) 2,74 (.108) 2,84 (.112) 7,19 (.283) 2,80 (.110) 8,64 (.340) 8,23 (.324) REAR FLANGE REF 7,19 (.283) 8,28 (.326) REAR FLANGE REF REAR FLANGE REF 6,91 (.272) 9,68 (.381) 9 Contacts 12,42 (.489) REAR FLANGE REF 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) 17,96 (.707) 20.70 (.815) 20,70 (.815) 23,47 (.924) 23,47 (.924) 37 Contacts 33,32 (1.312) 9,60 (.378) 6,86 (.270) Signal Contact 9,60 (.378) 6,86 (.270) 8,23 (.324) Mounting Hole 2,74 (.108) 2,54 (.100) 8,64 (.340) 5,49 (.216) 5,49 (.216) 7,19 (.283) 5,49 (.216) REAR FLANGE REF 8,23 (.324) 8,23 (.324) REAR FLANGE REF 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) Reader's Resource Signal Contact 272 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) 2,84 (.112) 2,80 (.110) 8,64 (.340) 7,19 (.283) 8,28 (.326) REAR FLANGE REF 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 6,91 (.272) REAR FLANGE REF 9,68 (.381) 12,42 (.489) 15,19 (.598) 25 Contacts 50 Contacts Signal Contact X 0,76 (.030) 1,00 (.040) Recommended PCB Hole X 1,14 (.045) 1,40 (.055) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change PCB Hole Pattern -- European 90 -- Plug & Receptacle 63,50 (2.500) 24,84 (.978) 24,84 (.978) 22,10 (.870) 22,10 (.870) 19,33 (.761) 19,33 (.761) 16,56 (.652) 16,56 (.652) 25,00 (.984) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) Signal Contact 5,49 (.216) 5,49 (.216) 8,28 (.326) 5,54(.218) 5,54(.218) Signal Contact Mounting Hole 5,49(.216) 11,05 (.435) Mounting Hole 5,54(.218) 2,54 (.100) 2,74 (.108) 10,90 (.429) 2,54 (.100) 9,40 (.370) 2,80 (.110) 8,23 (.324) 10,90 (.429) REAR FLANGE REF 9,40 (.370) 8,28 (.326) REAR FLANGE REF 6,91 (.272) REAR FLANGE REF 9,68 (.381) 9 Contacts 12,42 (.489) 6,91 (.272) 12,42 (.489) 15,19 (.598) 15,19 (.598) 17,96 (.707) 17,96 (.707) 20.70 (.815) 20,70 (.815) 23,47 (.924) 9,60 (.378) 6,86 (.270) Signal Contact 23,47 (.924) 37 Contacts 33,32 (1.312) 9,60 (.378) REAR FLANGE REF 9,68 (.381) 6,86 (.270) 8,23 (.324) Mounting Hole 2,74 (.108) 2,54 (.100) 10,90 (.429) 5,49 (.216) 5,49 (.216) 9,40 (.370) 5,49 (.216) REAR FLANGE REF 8,23 (.324) 8,23 (.324) REAR FLANGE REF 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) Signal Contact 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) Mounting Hole 5,54(.218) 2,54 (.100) Reader's 2,80 (.110) 6,91 (.272) REAR FLANGE REF 9,40 (.370) 8,28 (.326) 10,70 (.421) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) REAR FLANGE REF 12,42 (.489) 15,19 (.598) 15,19 (.598) 25 Contacts 50 Contacts Recommended PCB Hole X 1,00 (.039) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Resource Signal Contact X 0,60 (.024) Dimensions are shown in mm (inch) Dimensions subject to change 273 PCB Hole Pattern -- Standard/European Straight -- Plug & Receptacle 25,00 (.984) 5,49 (.216) Signal Contact 5,49 (.216) 5,49(.216) 2,84 (.112) 2,74 (.108) Mounting Hole 8,23 (.324) 9 Contacts 33,32 (1.312) 9,60 (.378) 6,86 (.270) 37 Contacts 9,60 (.378) 6,86 (.270) 8,23 (.324) Mounting Hole 2,74 (.108) 2,84 (.112) 5,49 (.216) Signal Contact 5,49 (.216) 5,49 (.216) 8,23 (.324) 8,23 (.324) 15 Contacts 47,04 (1.852) 16,56 (.652) 16,56 (.652) 13,82 (.544) 13,82 (.544) 11,05 (.435) 8,28 (.326) Reader's Resource Signal Contact 274 11,05 (.435) 8,28 (.326) 5,54(.218) 5,54(.218) 5,54(.218) 2,84 (.112) Mounting Hole 2,80 (.110) 8,28 (.326) 6,91 (.272) 9,68 (.381) 12,42 (.489) 6,91 (.272) 9,68 (.381) 12,42 (.489) 15,19 (.598) 15,19 (.598) 25 Contacts 50 Contacts Signal Contact X 0,60 (.024) 0,76 (.030) 1,00 (.040) Recommended PCB Hole X 1,00 (.039) 1,14 (.045) 1,40 (.055) Mounting Type Without Boardlock With Boardlock Recommended PCB Hole X 3,05 (.120) 3,10 (.122) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Lease Tooling ABT-607 Pneumatic Crimper ABT-607 The ABT-607 is a pneumatic powered and controlled machine. It is designed for customers with moderate volume. This machine is designed to semi-automatically crimp stamped and formed contacts onto pre-stripped stranded or single conductor electrical wire. This machine will accomodate size 34 thru 12 AWG wire and is actuated by the use of a foot pedal. Machine Crimp Rate: 800 per hour Power Requirements: Pneumatic = 100 psi, 2 cu. ft. per min. Products: D*A, MDSM, 75 Ohm Crimp Coax ABT-620 UCCS Semi-Automatic Crimper/Stripper ABT-620 UCCS The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic powered, microprocessor controlled machine. It is designed to semi-automatically strip insulation from stranded or single conductor electrical wire and attach a stamped and formed contact by crimping. The machine will accommodate 34 thru 12 AWG wire. Primary application of the machine is the termination of jacketed cable where the individual leads cannot be stripped on fully automated equipment. The ABT-620 UCCS operates automatically upon insertion of a wire or it can be switched over to foot pedal operation as desired. Machine Strip/Crimp Rate: 1200+ per hour Power Requirements: Electrical = 115 VAC, 60 Hz, 20 A Pneumatic = 80 psi, 3 cu. ft. per min. Products: D*A, MDSM CBT-646 Vibra-Bowl Crimper The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. Machine Crimp Rate: 1300+ per hour Power Requirements: Electrical = 115 VAC, 60 Hz, 5 A Pneumatic = 85 psi, 2 cu. ft. per min. Resource Products: D*MA Reader's CBT-646 Dimensions are shown in mm (inch) Dimensions subject to change 275 D Subminiature Glossary of Terms Glossary of Terms In every job speciality there are certain words and phrases used by the ``insiders'' which after a time become almost a language unique to that speciality. D Subminiature technology is a typical example of that condition. AWG -- American Wire Gauge. A standard for wire diameters based on the approximate circular mil area of the wire. As numbers get larger, wire diameters decrease in size (a size 16 AWG wire has a larger diameter than a size 22 AWG). The following pages provide some explanations, in an attempt to clarify some of the terms that are commonly used by engineers and sales staff at ITT Cannon. The list is not comprehensive, but highlights many of the expressions commonly used. Should you have any comments or additions please contact us. Feedback will be appreciated. Backshell -- (Also known as Endbell) The outer rear end of the connector which is attached by means of internal threads or screws. It adapts the connector to its wire connections in a variety of ways. Typical backshells might have cable clamps to secure a wire bundle, ridges for heat shrink tubing, pipe threads, or shielded termination mechanisms. Backshells may be straight, 90, or 45. Accelerated Aging -- A connector test in which temperature, voltage, current, or other parameters are increased beyond the normal operating values to observe deterioration in a relatively short period of time. Bandwidth -- The range of frequencies within which performance falls within specific limits. Usually the bandwidth is given as an operating range and the operating specifications apply only to that bandwidth, unless otherwise stated. Accessories -- Auxiliary devices such as cable clamps, endbells, gaskets, or any number of mechanical hardware devices that can be added to a connector. Bar -- A centimeter-gram-second unit of pressure (force exerted on a unit of area) equal to 1,000,000 dynes per square centimeter. Formerly known as microbar. Its symbol is b. Alloy -- A composition of two or more elements, of which at least one is a metal. In connector applications it is usually a combination of metals which is used to create an alloy superior in performance to any of its individual components. Base Metal -- The metal which the connector or connector component is made and over which various platings will be deposited. Reader's Resource Alternating Current -- A flow of electricity which reaches a maximum in one direction, decreases to zero, then reverses itself and reaches maximum in the opposite direction. This cycle is repeated continuously. The number of such cycles per second is the frequency. The average value of the voltage during any cycle is zero. Abbreviated ac. 276 Ambient Temperature -- The temperature of the environment surrounding the connector. Usually the air. Normally used as the reference when specifying the OPERATING TEMPERATURE range of the connector. Ampere -- A unit of electrical current or rate of flow of electrons. One volt across one ohm of resistance causes a current of 1 ampere. Abbreviated Amp or A. Anodize -- A protective, insulating oxide layer formed on a metal by electrolytic action. Occasionally used as the outer most layer in connector plating, anodize is a very tough, nonconductive plating. Beryllium Copper -- An alloy of copper used to make contacts. It is relatively expensive, but has superior spring qualities, is resistant to fatigue, and can operate at higher temperatures than other materials such as phosphor bronze. It is used when numerous insertion and extraction cycles are required. Body -- The main portion of the connector made of the shell, insulator, and contacts. Boot -- A rear accessory, usually made of a resilient material, which is used around a multiconductor cable to add additional insulation, strength, abrasion resistance, or sealing. Brass -- Metal alloy of copper and zinc used for contacts. It is low cost, an excellent conductor, and resists fatigue. Breakdown -- An electrical discharge through a connector insulator or insulation on a wire. A catastrophic failure mode. Breakdown Voltage -- The voltage at which an insulator ruptures. C -- Abbreviation for Centigrade, or more properly Celsius, since the term Centigrade was officially abandoned by international agreement in 1948. See CELSIUS. Cable Assembly -- A cable (or bundle of cables) with plugs and/or receptacles on each end. Cable Clamp -- A rear connector clamping accessory which tightens over a cable or wire bundle to provide strain relief to the cable. The cable clamp may be part of a more elaborate endbell or it may be used alone. Some cable clamps also provide cable jacket sealing using a resilient gland; for example the MS3057-C, others provide only strain relief. Cadmium -- A metallic element chemically related to zinc and mercury, widely used for plating. It has an extraordinary ability to resist outdoor corrosion. It is especially resistant to alkali. Cadmium is electrically conductive and it is easy to solder. Its symbol is Cd. CECC -- Abbreviation for Electronic Components Committee of CENELEC, the European committee for Electrotechnical Standardization. CECC uses the IEC test methods, and thus is based upon worldwide standards. Celsius -- A temperature scale in which the freezing point of water is 0 and the boiling point is 100 at normal atmospheric pressure. Formerly known as Centigrade, but officially changed to Celsius by international agreement in 1948. CEN -- Abbreviation for European Committee for Standardization. A European standards group corresponding to the ISO at the European level. CENELEC -- Abbreviation for European Committee for Electrical Standardization. A European standards group corresponding to the IEC at the European level. Chamfer -- A bevel cut on the inside edge of an insulator contact cavity or a mounting hole. In a contact cavity the chamfer is intended to guide the mating pin into the cavity. In a mounting hole it is a countersink to accept a cone shaped bolt. Characteristic Impedance -- The characteristic impedance of a transmission line is the impedance of the line when it is terminated in a perfect load (a load that absorbs all the energy and reflects none, such that VSWR = 1.00). Clearance Hole -- See Through Hole. Attenuation -- Power loss in an electrical system, expressed in decibels. Breakout -- The point at which wires are separated from a multi-conductor cable or wire bundle for routing to other points. Closed Entry -- An insulator design which limits the diameter of the mating contacts. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Glossary of Terms Glossary of Terms Coaxial Cable -- A cable that comprises a single copper wire surrounded by insulating material, wire shielding or mesh, and a plastic protective sheath. Contact Size -- This usually relates to the maximum size wire this contact can nominally accommodate. It is based on that AWG size most closely corresponds to the circular mil area of the engaging end of a pin contact for that size. For example, a size 16 contact can accomodate a size 16 AWG wire maximum and the pin corresponds to the CMA of a size 16 AWG. Note, however, that oversized crimp pots are available for some crimp contacts which will allow, for example, a size 16 contact to accommodate a size 14 AWG wire. Component -- An essential functional part of the connector. Contact Spacing -- The distance between the centers of adjacent contacts. Contact -- The conductive element in a connector which makes the actual connection between the wire and the mating connector for the purpose of transferring electrical energy. Ideally the contact should add nothing to the circuit. In the real world, however, contacts typically have a small CONTACT RESISTANCE and associated potential drop. Creepage -- The conduction of electricity across the surface of an insulator. Closed Socket Contact -- A socket contact in which the mating cavity limits the entry of a contact or probe having a diameter larger than the mating pin. Coax -- Abbreviation for coaxial. Contact Alignment -- The overall play that a contact has in the insulator cavity to allow the mating contacts to self align. Also called contact float. Creepage Distance -- The shortest distance between contacts of opposite polarities, or between a live contact and ground, measured over the surface of the insulator. Creepage Path -- A path across the surface of the insulator between two conductors. Lengthening the path reduces the possibility of arc damage. Crimp -- A method of attaching a contact to a wire through the application of pressure. Contact Arrangement -- See LAYOUT. Contact Cavity -- A defined hole in the connector insulator into which the contacts fit. The cavities are generally marked with a unique designation or number for ease of identification. Contact Retention -- The maximum allowable axial load which can be applied to a contact from either direction without it being dislodged from the insulator. Usually stated in Newtons or pounds of force. CSA -- Abbreviation for Canadian Standards Association. Current -- The movement of electrons through a conductor. Current is measured in amperes. Its symbol is L. Current Rating -- The maximum current that a particular wire, contact, or connector can accommodate. NOTE: When several wires are used in a single connector or elevated temperature or altitude is involved, derating curves must be applied to these ratings. A typical derating system is MIL-W-5088 which allows the user to calculate the derating effects of current, ambient temperature, number of wires in the bundle, and altitude. Derating Curve -- A graph of the change in power handling capability of a connector as a function of ambient temperature or altitude. Typically the graphed function is curved, hence the name. Diallyl Phthalate -- A thermosetting plastic used for insulators and some types of connector housings. It has outstanding resistance to chemicals, excellent dimensional stability, and superior electrical insulating properties. Dielectric -- An insulator used to isolate two conductors having a low loss factor (RF cables). The perfect insulator is a vacuum. Dielectric Constant -- That property (K) of an insulating material which is the ratio of the parallel capacitance (C) of a given configuration of electrodes with the material as the dielectric, to the capacitance of the same electrode configuration with a vacuum as the dielectric. Digital -- A signal comprising discrete elements. DIN -- Abbreviation for Deutsche Industrie Norm, a German standards organization. Direct Current -- An essentially constant value of current that flows in only one direction. Abbreviated dc. Dust Cap -- A cover used in place of a mating connector to seal it against dirt and moisture. Usually secured to the connector by a captive chain, wire, or rope. Electroplating -- To deposit a metal on the surface of a conductor using electrolysis. EMI/RFI -- Electro-Magnetic Interference and Radio Frequency Interference. This is unwanted stray electronic radiation which may enter, and/or be emitted by an electronic system. The most common method of shielding interconnections against this radiation is to use wires with a metallic braided shield and a connector system which will extend the shield through the interconnection. This type of design will keep radiation from entering, or being emitted by the system. Backshells for shielded cable and connectors with threads or grounding fingers are typically used for this purpose. Call for the specific EMI/RFI accommodations of the connectors in this catalog. Dimensions are shown in mm (inch) Dimensions subject to change Resource Contact Separation Force -- The force required to separate a pair of mated contacts. Usually stated in Newtons or pounds of force. Crosstalk -- Undesired electrical currents in conductors caused by electromagnetic or electrostatic coupling from other conductors or from external sources. Also, leakage of optical power from one optical conductor to another. Derating -- To reduce the voltage, current, or power rating of a connector to improve its reliability or to permit operation at high ambient temperatures or altitudes. Reader's Contact Resistance -- The maximum amount of resistance which a contact introduces into the connection when carrying a specified current (usually stated in milliohms). When not stated, values are typically given for ``Initial'' or ``new'' contacts. Most specifications also limit the maximum resistance during or after each of a series of extreme tests, such as ``Contact Resistance After Corrosion Test''. These figures are typically slightly higher than ``Initial''. Crimp Contact -- A contact which is terminated to a wire by means of crimping with an appropriate die and tool. After termination, an insertion tool is normally used to insert the crimped contact into the connector. Removable crimp contacts can be FRONT RELEASE or REAR RELEASE. An extraction tool is usually required to remove the contact. Decibel -- A standard unit of measure for transmission gain or loss. It expresses the ratio of power input to power output. Abbreviated dB. The term dBm is used when 1 milliwatt is the reference level. 277 D Subminiature Glossary of Terms Glossary of Terms EN -- Abbreviation for Euro Norm. A European market-wide product standard. Front Mounting -- A receptacle that can only be mounted to the front of a panel with its mounting FLANGE outside the equipment. Endbell -- See BACKSHELL. Extraction Tool -- A device used to remove a (removable) contact from a connector insulator. The extraction tool may be inserted into the mating face of the insulator (FRONT RELEASE) or the wire side (REAR RELEASE). In either case, the contact comes out the rear, or wire side, of the connector. Fahrenheit -- A temperature scale in which the freezing point of water is defined as 32 and the boiling point is 212 at normal atmospheric pressure. See the conversion tables for converting Fahrenheit to Celsius. Abbreviated F. Front Release -- For crimp type removable contacts, front release means that the appropriate extraction tool is inserted from the front, or mating face, of the connector. The contact is then pushed out the rear (wire side) of the connector. Insert -- See INSULATOR. Gas Tight -- The mating of two contact surfaces which are so tight that corrosive gasses can not enter the joint. Insert Arrangement -- See LAYOUT. Gold -- A precious metal that is more conductive than silver or copper. Because it does not corrode and is highly conductive, it is used as plating for contacts. Its chemical symbol is Au. Insert Retention Force -- The maximum allowable force which should be applied to the face of the insulator without dislodging it from the shell or causing any change in connector performance specifications. Usually stated in Newtons or pounds of force. Female Contact -- See SOCKET CONTACT. Ferrule -- A bell shaped ring which is placed over a WIRE SEALING GROMMET to provide uniform axial compression of the grommet and to minimize the transmission of torque to the grommet when the backshell is screwed on to the rear of the connector. Ferrules are a part of the sealing mechanism at the rear of a connector. Ferrules are normally a separate component part of the connector although some backshells have integrated ferrules. Ferrules are usually made from a thermoplastic material, but occasionally ferrules are made of metal. Reader's Resource Finish -- The metalic coatings used on contacts and metal connectors. These are thin layers of metal designed to improve conductivity, solderability, or to resist corrosion. Typical contact finishes are gold or silver. Typical shell finishes are olive drab over cadmium, electroless nickel, or black anodize. 278 Flange -- A square mounting flange with four mounting holes for bolting the connector to a panel. The mounting holes may be through holes or threaded. Flanged Receptacle -- (Also known as a Box Mount or Wall Mount) The shell of this connector has a square flange with mounting holes at each corner. Mounting holes are usually through holes, but may be threaded. Flanged receptacles can usually be front or rear panel mounted depending upon panel thickness. Some connectors have two different versions, one for front mounting, and one for rear panel mounting. Flash Plating -- As commonly used in connector terminology, flash refers to extremely thin platings of metal, for example: gold flash is a very thin plating of gold. So thin, that the thickness is generally not specified. Initial -- A test result taken prior to any other environmental testing. For example, contact resistance is frequently specified ``Initial'', that is, with ``new'' contacts. Most specifications also limit the maximum resistance during or after each of a series of extreme tests, such as ``Contact Resistance After Corrosion Test''. These figures are typically slightly higher than ``Initial''. Grommet Cavity -- A defined hole in the WIRE SEALING GROMMET through which the wires are passed. The cavities are generally marked with a unique designation or number for ease of use. Guide Pin -- A special pin which is inserted into a socket contact before the contact can be inserted into the connector insulator. Guide pins provide a rounded surface at the front of the socket and greatly aid in pushing the contact into the insulator thus avoiding damage to both the insulator and the contact. Typically, small size socket contacts require the use of guide pins while larger sizes can be inserted without them. Harness -- A group of wires or cables bundled together with attached connectors and/or components in a preshaped assembly. Hz -- Symbol for Hertz, an international unit of frequency equal to one cycle per second. That is, 20,000 Hz is 20,000 cycles per second. I/O -- Input/Output IEC -- Abbreviation for the International Electrotechnical Commission. An international organization that develops standards exclusively for electrical engineering. CENELEC is the equivalent organization at the European level. Impedance Match -- When a transmission line is terminated so that VSWR = 1.00. Another definition is when a source is terminated in an impedance that allows optimum energy transfer. Indentor -- The part of a crimping die which indents the contact barrel to form the actual crimp. Indentors normally make six or eight multiple indentions for each crimp. Insertion Force -- The effort, usually stated in ounces or Newtons, required to engage two contacts or connector halves. Insertion Loss -- The attenuation that results when a transducer is inserted in a transmission line. It is the ratio of the power input to the transducer to the power out of the transducer expressed in decibels. Insertion Tool -- A small, hand-held tool used to insert contacts into a connector. Insulation -- A material that has high electrical resistance and is suitable for covering or encasing electrical components to prevent a short circuit. Insulation Displacement Connector (IDC) -- A connector contact with sharp tines which pierce and displace the wire insulation and make direct electrical connection with the conductor. Normally used with multipin connectors which must be terminated to flat cable. This is a fast, low cost method to terminate many conductors simultaneously. Insulation Resistance -- The minimum resistance (usually stated in Megohms) between adjacent contacts and between the contacts and the shell at a specific voltage. When not stated, values are typically given for new insulators. Most specifications also specify minimum resistance figures during or after each of a series of extreme tests, such as ``Insulation Resistance During Dry Heat''. Insulation Support -- An extended portion at the rear of a crimp contact that is crimped around the wire insulation to provide extra strain relief. This crimp is in addition to the crimp over the conductor which provides the actual electrical termination. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Glossary of Terms Glossary of Terms Insulator -- The insulating element into which the contacts are mounted in a connector. This can be a resilient material, thermoplastic, or a thermoset compound, among other materials. Insulator Rotation -- A method of differentiating a circular connector if more than one connector with the same sex and layout is to be used in a system. The insulator is permanently positioned in the shell so that only a connector with the same degree of rotation can be mated with it. Possible rotations are specific to each layout with some layouts having many possible rotations and others having none. A chart of valid rotations is listed by layout for connectors capable of being rotated. Most connector series use the military convention of assigning letter designations for specific degrees of rotation (for example: W, X, Y, Z). See KEYING. Interchangeable -- The characteristic of connectors in which a connector half of one manufacturer or series will directly replace that of another manufacturer and provide the same electrical and mechanical function. Keying -- A method of differentiating a connector if more than one connector with the same sex and layout is to be used in a system. The key is usually a pin or other projection which can be located in a contact cavity or slot. The key will prevent a connector without a matching orifice from mating. Keying and POLARIZATION serve the same function, but keying can be done by the user, while polarization is manufactured into the connector and normally can not be altered by the user. Layout -- The number, size, and geometric arrangement of the contacts in a connector. When a connector is said to have a certain ``layout'' it refers to a specific contact configuration. For example, Combo D has 2 pages of drawings showing the arrangement of the contacts in the insulator. Each of these contact cavity arrangements can be referred to as a layout. Locator -- A part of a crimping tool TURRET. Rotation of the locator sets the tool for a particular size or sex contact. See TURRET. Male Contact -- See PIN CONTACT. Intermateable -- The characteristic of connectors in which a connector half of one manufacturer or series will mate directly with the connector half of another manufacturer. Intermittent -- Occurring at intervals. A connection which passes electrical current only in random or undesirable intervals. Intermountable -- The characteristic of connectors in which one manufacturer's connector or series will mount in exactly the same panel space and mounting holes as another manufacturer's product. Jacket -- The outermost layer of insulation in a cable composed of several wires. Jackscrew -- A screw attached to one half of a connector pair used to mechanically align, draw them together, and lock them in place. Mil-Spec -- Specification. Abbreviation for Military Ohm -- The unit of electrical resistance. One ohm is the value of resistance through which a potential difference of one volt will maintain a current of one ampere. Its symbol is the Greek letter omega (). Operating Temperature -- The range of AMBIENT TEMPERATURES over which the connector can operate and still meet all of its design specifications. Operating Voltage -- The range of voltages over which the connector can be operated. Safety precautions must be taken anytime a voltage in excess of 50V is to be used in a circuit. Check your local and national codes for guidelines. Outgassing -- The circumstance in which an insulator releases gasses trapped within it under a vacuum or conditions of decreased pressure, high heat, or both. Panel -- The outside surface of a piece of equipment on to which connectors are mounted. The panel is usually made of metal. Panel Mount -- A connector designed to be mounted on a panel by means of screws or jam nut. PCB -- Abbreviation for Printed Circuit Boards. Milliampere -- One one-thousandth (.001) of an ampere. Abbreviated mA. Millimeter -- Metric unit of linear measure. 1 millimeter = .03937 inches. Abbreviated mm. Milliohm -- One one-thousandth (.001) of an ohm. Abbreviated m. mm2 -- Millimeters squared. A standard for wire diameters used in Europe instead of AWG. As numbers get larger, wire diameters increase in size. The relationship between mm2 and AWG is reverse logarithmic. 1 mm2 = 1973 circular mils. A conversion graph is needed to make accurate comparisons between AWG and mm2. Call for assistance. Mounting Clip -- Any of a variety of mounting accessories used to secure a connector or connector pair to a rigid surface. Performance Class 1 -- Performance class per European specification DIN 41652, specifying contact performance to 500 mating cycles, followed by testing per DIN 41640, Part 21. The contact is subjected to severe environmental conditions, including industrial gasses, after the 500 mating cycles, and must meet basic contact resistance, engaging force, and separation force tests. Performance Class 2 -- Performance class per European specification DIN 41652, specifying contact performance to 200 mating cycles, followed by testing per DIN 41640, Part 21. The contact is subjected to severe environmental conditions, including industrial gasses, after the 200 mating cycles, and must meet basic contact resistance, engaging force, and separation force tests. Multi-Conductor Cable -- Two or more individual wires surrounded by a jacketing material. Dimensions are shown in mm (inch) Dimensions subject to change Resource Key -- A mechanism used to polarize connectors by the user. See KEYING. Mil -- One thousandth of an inch (.001). Used in the United States as a unit of length in wire diameters and linear dimensions. Newton -- A unit of acceleration. One Newton is the force capable of accelerating 1 kilogram to one meter per second per second. 1 pound force = 4.448221 Newtons. Abbreviated N. Reader's ISO -- Abbreviation for the International Standards Organization. A group that operates at the international level and sets most standards for industry, with the exception of electrical engineering and telecommunications which are set by the IEC and ITU respectively. CEN is the equivalent organization at the European level. Mating Life -- The minimum number of times a connector can be mated and unmated and still meet all of its design specifications. The maximum life may be much higher than this figure. Nest -- The portion of a crimping die that supports the contact barrel during crimping. 279 D Subminiature Glossary of Terms Glossary of Terms Performance Class 3 -- Performance class per European specification DIN 41652, specifying contact performance to 50 mating cycles, followed by testing per DIN 41640, Part 21. The contact is subjected to severe environmental conditions, including industrial gasses, after the 50 mating cycles, and must meet basic contact resistance, engaging force, and separation force tests. Peripheral Seal -- A resilient seal used to keep moisture from entering the connector at the point where the plug and receptacle shells meet. A common method is to use flat gaskets on receptacles and O-rings on plugs. Phosphor Bronze -- An alloy of copper, tin, and phosphorus used to make spring contacts. It is typically used in lower cost contacts where frequent insertions and withdrawals and high temperatures are not a factor. Pin -- A male contact. See PIN CONTACT. Pin Contact -- The contact which has a long shaft at the engagement end which enters the socket contact. Plating -- See FINISH. Reader's Resource Plug -- The male portion of a connector pair usually employing a coupling nut to secure it to the receptacle half. A plug may have either pin or socket contacts. 280 Polarization -- A mechanical mechanism that allows connector halves to intermate in only one specific orientation. This can be accomplished by asymmetrical shapes of the two halves as in a D Subminiature connector, insulator rotation, keys, keyways, ramps, or other means. Polarization prevents connectors of the same size and/or same layout from intermating when this is undesirable, such as when two otherwise identical connectors are used on the same panel. Polarization is typically done by the assembler and can not be changed by the user, while keying is typically done by the user with an auxiliary keying device. Polarizing Pin -- A mechanism used to polarize connectors, manufactured into the connector. See KEYING. Potting -- The permanent sealing of a cable to a connector using an insulating material such as potting compound to exclude moisture or provide strain relief. See POTTING CUP. Potting Compound -- A sealing material used in potting to fill a potting cup. Potting Cup -- A bell-shaped (plastic) backshell with an enlarged opening for the wires. After the connector is loaded with wired contacts, the potting cup is attached to the rear of the connector. The inside of the cup is then filled with a potting compound. When the compound hardens, it forms a solid, permanent, watertight mass around the wires. Potting Ring -- A portion of the POTTING CUP which secures the bell shaped cup to the rear of the connector, usually by means of internal threads. Pre-Tin -- To apply tin-lead solder to the contact solder cup and/or conductor prior to soldering the two together. Rear Mounting -- A receptacle that mounts through the panel from the rear, with its mounting flange inside the equipment. Typically, rear mount receptacles are slightly longer than front mount types to allow for the thickness of the panel. Flange mount receptacles usually come in front and rear mount versions. All Jam nut receptacles are rear mount. Rear Release -- For crimp type removable contacts, rear release means that the appropriate extraction tool is inserted from the rear, or wire side, of the connector. The contact is then pulled out the rear of the connector. Receptacle -- The connector half that mates with the plug. The receptacle has threads, pins or ramps which engage the coupling nut on the plug, locking the two halves together. A receptacle may have either pin or socket contacts. REF -- Abbreviation for Reference. Removable Contact -- A contact which can be inserted and removed from the insulator by the user. An insertion tool and extraction tool are normally required to insert and remove the contact. Salt Spray Test -- A test, or series of tests, in which mated and/or unmated connectors are subjected to salt water under specified conditions. Used to test the connector's resistance to corrosion and any associated degradation in electrical function. Screw Machine Contact -- A contact made from a solid bar or rod using screw machine operations. Some screw machine contacts include secondary elements which are welded, crimped, or formed around the basic screw machined part to complete the contact. Selective Plating -- The application of metal PLATING to selective areas of the contact, particularly those areas subject to wear. Precious metal platings may be applied selectively to those contact surfaces responsible for the electrical connection, reducing the contact cost without sacrificing electrical performance. Shell -- The outside case of a connector into which the insulator and contacts are situated. Shell Size -- A standard system developed for military circular connectors for indicating the diameter of the shell. The system is based upon 116 increments, that is, a size 16 shell is one inch in diameter. Shield Effectiveness -- The ability of a shield to screen out undesirable signals. Shock -- An abrupt impact applied to a stationary object. It is usually expressed in gravities (g). Socket -- A female contact. See SOCKET CONTACT. Socket Contact -- The contact which has an opening at the engagement end to accept the pin contact. Resistance -- That property of a substance which impedes current and results in the dissipation of power in the form of heat. The unit of resistance is the ohm. Solder Contact -- A contact which is terminated to the wire with solder. Solder contacts are normally bonded into the insulator and can not be removed by the user. The alternative is crimp contacts to which a wire is attached by crimping. Crimp contacts can usually be inserted and removed by the user. Return Loss -- The ratio of the power reflected from a discontinuity in a transmission line to the power incident. Solder Cup -- The end of a SOLDER CONTACT is designed to accept a wire which will then be soldered to the contact. RFI -- See EMI/RFI. Stamped and Formed Contact -- Contacts made by stamping and forming a sheet of metal rather than by machining metal stock. Also see SCREW MACHINE CONTACTS. Removal Tool -- See EXTRACTION TOOL Root Mean Square -- The square root, of the average of the squares, of the values of a periodic quantity (like alternating current), taken through one complete period. It is the effective quantity of a periodic quantity. Abbreviated rms. Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Glossary of Terms Glossary of Terms Star Clip -- One of several designs used for screw machine socket contacts. A tiny plated star shaped clip is captivated inside a solid barrel into which the pin contact fits. The clip creates a multi-point area of mechanical and electrical continuity between the mated contacts. Stripper -- A tool to remove insulation from a wire. UL -- Abbreviation for Underwriter's Laboratories, a corporation supported by a group of underwriters for the purpose of establishing safety standards covering certain types of equipment and components in the United States. UL 94V-O -- A flammability performance rating set by Underwriter's Laboratories for plastics. V -- Symbol for volt. Test Voltage -- The range of voltages over which the connector has been tested per the perimeters in the applicable specification. Vac -- Volts, alternating current. Vdc -- Volts, direct current. Thermoplastic -- A plastic material that can be softened by heat and rehardened into a solid state by cooling. This process can be accomplished using a variety of techniques. Thermoset -- A plastic material which hardens when heat and pressure are applied. Unlike thermoplastic, it cannot be remelted or remolded. Through Hole -- (Also known as a clearance hole) A mounting hole without threads. Turret -- An interchangeable device which is attached to a CRIMP TOOL that allows the tool to crimp a range of contacts. Each turret is made to crimp a specific style contact or a range of contacts and/or wire gauges. See LOCATOR. Vibration -- A continuously reversing change in the magnitude of a given force. Volt -- The unit of measurement of electromotive force. It is equivalent to the force required to produce a current of 1 ampere through a resistance of one ohm. Voltage -- The force which causes current to flow through an electrical conductor. Its symbol is E. The greatest effective difference in potential between and two conductors of a circuit. Voltage Drop -- The difference in voltage between two points in a circuit due to the loss of electrical pressure as a current flows through an impedance. Voltage Rating -- The maximum voltage which a connector can sustain without breaking down or varying from design specifications. Voltage Standing Wave Ratio -- If a signal is sent down a transmission line any discontinuity will send a reflection back in the opposite direction. Wire Sealing Grommet -- A resilient disc with holes in it to accommodate the individual wires entering the rear of the connector. Each cavity forms a tight seal against the wire insulation (as long as wires within the specified diameter are used). The grommet seals the back of the connector against moisture, dirt, and air. The grommet is normally held in place and compressed by a backshell and/or ferrule. It is usually a separate component, but may be part of the insulator itself. Also see GROMMET CAVITY. Wire Size -- A numerical designation for conductor diameter. This catalog uses American Wire Gauge (AWG) which is based on the approximate circular mil area of the wire. See AWG and mm2. Wrap Post Contact -- A type of contact which is terminated by wrapping wire around a post in a manner that deforms the wire and creates a gastight connection between the wire and the post. This method is slow and labor intensive. If used at all, it is used in prototype work. Reader's Resource Dimensions are shown in mm (inch) Dimensions subject to change 281 D Subminiature Reader's Resource Obsolete Products General Application Connectors D*C Burgun D with snap-in, rear release machined or stamped crimp contacts. Refer to D*U products. D*P 90 connectors for I/O applications, UL 94V-0 rated. Refer to D*U products D*PF Straight and 90 PCB applications, UL 94V-0 rated. Refer to D* products. AD* Part number change only. Refer to ZD* products. D*11148 D*(SMT) SMT - Surface Mount D, no replacement, only through holes available. Refer to ZED* products. D*P1 Machined pressfit replaced by stamped pressfit. Refer to D*NG products. D*TC Part number change only. Refer to D* products. Available Products Not Listed Within This Publication General Application Connectors Special Application Connectors D*U Burgun D with snap-in, rear release machined or stamped crimp contacts, UL 94V-0 rated. D*MA Military specification quality removable crimp style contacts for high performance applications. GD* Grommet D environmentally sealed, crimp, snap-in, rear release contacts. D*SF Speedy D for IDC ribbon cable, UL 94V-0 rated, accomodates Sizes 28-26 AWG cable on 1,27 (.050) conductor spacing. ZD*A Low cost, stamped contacts, high density 90 PCB connectors. D*D Environmentally sealed, cast aluminium shell. Product not intermatable with M24308 type D Subminiature connectors. Commercial Applications Only Military or Commercial Applications Reader's Resource Consult factory for details. 282 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DA15P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DA15P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DA15P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DA15P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DA15P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12 DA15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DA15S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11 DA15S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . . 27 DA15S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . . 27 DA15S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DA15S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DA15S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DA15S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25 DA15S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . . 23 DA15S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . . 25 DA15S-1AON-A197 . . . . . . . . . . . . . . . . . . . . . 21 DA15S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . . 27 DA15S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27 DA15S-1AVN-A197. . . . . . . . . . . . . . . . . . . . . 25 DA15S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25 DA15S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13 DA15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DA19678-1 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DA19678-157 . . . . . . . . . . . . . . . . . . . . . . . . 195 DA19678-167 . . . . . . . . . . . . . . . . . . . . 193, 195 DA19678-174 . . . . . . . . . . . . . . . . . . . . . . . . 195 DA19977-1 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DA19977-40 . . . . . . . . . . . . . . . . . . . . . 193, 195 DA20961 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DA20961-16 . . . . . . . . . . . . . . . . . . . . . . . . . 192 DA22213 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DA22214 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 DA24658 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DA24658-15 . . . . . . . . . . . . . . . . . . . . . 192, 195 DA50905-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DA51210 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DA51211 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DA51220-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210 DA53750-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DAA11W1PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DAA11W1SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DAA15PK87FO . . . . . . . . . . . . . . . . . . . . . . . . 36 DAA15SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37 DAA3W3PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DAA3W3SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DAA7W2PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DAA7W2SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DABS-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 DABU111512 . . . . . . . . . . . . . . . . . . . . . . . . 216 DAE15P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DAE15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DAE15S-0L2-A197-146 . . . . . . . . . . . . . . . . . . 11 DAE15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DAJK15P*-1A0N . . . . . . . . . . . . . . . . . . . . . . 110 DAJK15P*-1A5N . . . . . . . . . . . . . . . . . . . . . . 118 DAJK15P*-1A6N . . . . . . . . . . . . . . . . . . . . . . 118 DAJK15P*-1A7N . . . . . . . . . . . . . . . . . . . . . . 114 DAJK15P*-1A8N . . . . . . . . . . . . . . . . . . . . . . 114 DAJK15P*-1A9N . . . . . . . . . . . . . . . . . . . . . . 114 DAJK15P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116 DAJK15P*-1AFN . . . . . . . . . . . . . . . . . . . . . . 114 DAJK15P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116 DAJK15P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114 DAJK15P*-1AJN . . . . . . . . . . . . . . . . . . . . . . 116 DAJK15P*-1APN. . . . . . . . . . . . . . . . . . . . . . 118 DAJK15P*-1ATN . . . . . . . . . . . . . . . . . . . . . . 118 DAJK15P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118 DAJK15P*-1AVN . . . . . . . . . . . . . . . . . . . . . . 116 DAJK15P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116 DAJK15P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108 DAJK15P*-1U7N . . . . . . . . . . . . . . . . . . . . . . 112 DAJK15P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112 DAJK15P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DAJK15S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111 DAJK15S*-1A5N . . . . . . . . . . . . . . . . . . . . . . 119 DAJK15S*-1A6N . . . . . . . . . . . . . . . . . . . . . . 119 DAJK15S*-1A7N . . . . . . . . . . . . . . . . . . . . . . 115 DAJK15S*-1A8N . . . . . . . . . . . . . . . . . . . . . . 115 DAJK15S*-1A9N . . . . . . . . . . . . . . . . . . . . . . 115 DAJK15S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117 DAJK15S*-1AFN . . . . . . . . . . . . . . . . . . . . . . 115 DAJK15S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117 DAJK15S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115 Part Number Page DAJK15S*-1AJN . . . . . . . . . . . . . . . . . . . . . . 117 DAJK15S*-1APN. . . . . . . . . . . . . . . . . . . . . . 119 DAJK15S*-1ATN . . . . . . . . . . . . . . . . . . . . . . 119 DAJK15S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119 DAJK15S*-1AVN. . . . . . . . . . . . . . . . . . . . . . 117 DAJK15S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117 DAJK15S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109 DAJK15S*-1U7N. . . . . . . . . . . . . . . . . . . . . . 113 DAJK15S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113 DAJK15S*-OL4. . . . . . . . . . . . . . . . . . . . . . . 121 DAJKE15P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110 DAJKE15P*-1U0N . . . . . . . . . . . . . . . . . . . . 108 DAJKE15P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DAJKE15P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DAJKE15S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DAJKE15S*-1U0N . . . . . . . . . . . . . . . . . . . . 109 DAJKE15S*-OL4. . . . . . . . . . . . . . . . . . . . . . 121 DAJKE15S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DAJKX15P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110 DAJKX15P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DAJKX15P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DAJKX15S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DAJKX15S*-OL4. . . . . . . . . . . . . . . . . . . . . . 121 DAJKX15S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DAJT15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DAJT15S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DAJT3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3W3P1-1A0N . . . . . . . . . . . . . . . . . . . . 124 DAJT3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . . 126 DAJT3W3P5 . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3W3P5-1A0N . . . . . . . . . . . . . . . . . . . . 124 DAJT3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . . 126 DAJT3W3P6 . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3W3P6-1A0N . . . . . . . . . . . . . . . . . . . . 124 DAJT3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . . 126 DAJT3W3P9 . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3W3P9-1A0N . . . . . . . . . . . . . . . . . . . . 124 DAJT3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . . 126 DAJT3W3S1. . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3W3S1-1A0N . . . . . . . . . . . . . . . . . . . . 125 DAJT3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . . 127 DAJT3W3S5 . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3W3S5-1AON . . . . . . . . . . . . . . . . . . . . 125 DAJT3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . . 127 DAJT3W3S6 . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3W3S6-1A0N . . . . . . . . . . . . . . . . . . . . 125 DAJT3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . . 127 DAJT3W3S9 . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3W3S9-1A0N . . . . . . . . . . . . . . . . . . . . 125 DAJT3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . . 127 DAJT3WK3P1. . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3WK3P1-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJT3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJT3WK3P5 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3WK3P5-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJT3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJT3WK3P6 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3WK3P6-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJT3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJT3WK3P9 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJT3WK3P9-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJT3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJT3WK3S1. . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3WK3S1-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJT3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJT3WK3S5 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3WK3S5-1AON . . . . . . . . . . . . . . . . . . 125 DAJT3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJT3WK3S6 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3WK3S6-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJT3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJT3WK3S9 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJT3WK3S9-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJT3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTE15P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DAJTE15S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 DAJTE3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3W3P1-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTE3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTE3W3P5 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3W3P5-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTE3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTE3W3P6 . . . . . . . . . . . . . . . . . . . . . . . 128 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page CA111972-12 . . . . . . . . . . . . . . . . . . . . . . . . . 98 CA111972-22 . . . . . . . . . . . . . . . . . . . . . . . . . 98 CA112104 . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 CA112104-1 . . . . . . . . . . . . . . . . . . . . . . . . . 102 CA112104-2 . . . . . . . . . . . . . . . . . . . . . . . . . 102 CA112104-3 . . . . . . . . . . . . . . . . . . . . . . . . . 102 CA112104-4 . . . . . . . . . . . . . . . . . . . . . . . . . 102 CA112104-5 . . . . . . . . . . . . . . . . . . . . . . . . . 102 CCTP-750HM . . . . . . . . . . . . . . . . . . . . . . . . 84 CCTP-DM . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D110277 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 D110278 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 D110279 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 D110280 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 D110550 . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 D110551. . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 D115418-70 . . . . . . . . . . . . . . . . . . . . . . . . . 195 D115433-1 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82 D115433-2 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82 D115433-3 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82 D121073-19 . . . . . . . . . . . . . . . . . . . . . . . . . 201 D121073-39 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D121073-40 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D121073-41 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D121073-42 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D130322-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130322-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130322-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130344 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130344-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130344-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 84 D130356 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D130356-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D130356-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D130357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D130357-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D130357-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 85 D20418-101. . . . . . . . . . . . . . . . . . . . . . 194-195 D20418-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 209 D20418-39 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D20418-50 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D20418-52 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20418-70 . . . . . . . . . . . . . . . . . . . . . . . . . . 194 D20418-74 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D20418-80 . . . . . . . . . . . . . . . . . . . . . . . . . 209 D20419 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20419-104 . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20419-18 . . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20419-21. . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20419-48 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20419-73 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20419-74 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20419-84 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20420-13 . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20420-15 . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20420-49 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20420-63 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20420-67 . . . . . . . . . . . . . . . . . . . . . . 194-195 D20420-86 . . . . . . . . . . . . . . . . . . . . . . . . . 208 D20420-88 . . . . . . . . . . . . . . . . . . . . . . 194-195 DA-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DA-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DA111806-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DA111806-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DA111810 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 DA111810-3 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DA115339-1 . . . . . . . . . . . . . . . . . . . . . . . . . 207 DA115339-21 . . . . . . . . . . . . . . . . . . . . . . . . 205 DA115386-104A . . . . . . . . . . . . . . . . . . . . . . 195 DA115386-2B . . . . . . . . . . . . . . . . . . . . . . . 207 DA121073-150 . . . . . . . . . . . . . . . . . . . . . . . 200 DA121073-50 . . . . . . . . . . . . . . . . . . . . . . . 200 DA15P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . . 10 DA15P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DA15P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DA15P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DA15P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DA15P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DA15P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DA15P-1AFN-K87. . . . . . . . . . . . . . . . . . . . . . 22 DA15P-1AJN-K87. . . . . . . . . . . . . . . . . . . . . . 24 DA15P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20 Reader's Part Number Page 015-8755-000 . . . . . . . . . . . . . . . . . . . . . . . 207 015-8755-001 . . . . . . . . . . . . . . . . . . . . . . . 207 030-2042-002 . . . . . . . . . . . . . . . . . . . . . . . 195 030-2487-016 . . . . . . . . . . . . . . . . . . . . . . . . 83 030-2487-017 . . . . . . . . . . . . . . . . . . . . . . . . 83 030-2488-016 . . . . . . . . . . . . . . . . . . . . . . . . 83 030-2488-017 . . . . . . . . . . . . . . . . . . . . . . . . 83 030-8848-020 . . . . . . . . . . . . . . . . . . . 187, 195 030-8882-002 . . . . . . . . . . . . . . . . . . . 187, 195 031-1007-052-05 . . . . . . . . . . . . . . . . . . . . . 195 031-1147-002 . . . . . . . . . . . . . . . . . . . . . . . 195 031-8787-020 . . . . . . . . . . . . . . . . . . . 187, 195 031-8843-001 . . . . . . . . . . . . . . . . . . . 187, 195 031-8902-000 . . . . . . . . . . . . . . . . . . . . . . . 195 031-8902-001 . . . . . . . . . . . . . . . . . . . . . . . 187 031-8944-000 . . . . . . . . . . . . . . . . . . . 187, 195 070051-0000. . . . . . . . . . . . . . . . . . . . . . . . . 89 070064-0002 . . . . . . . . . . . . . . . . . . . . . . . . 88 075-0354-003 . . . . . . . . . . . . . . . . . . . . . . . 218 110238-1012 . . . . . . . . . . . . . . . . . . . . . . . . . 84 110238-1013 . . . . . . . . . . . . . . . . . . . . . . . . . 84 110238-1014 . . . . . . . . . . . . . . . . . . . . . . . . . 84 110238-1015 . . . . . . . . . . . . . . . . . . . . . . . . . 84 248-2967-000 . . . . . . . . . . . . . . . . . . . . . . . . 95 249-2271-000 . . . . . . . . . . . . . . . . . . . . . . . . 84 249-2272-000 . . . . . . . . . . . . . . . . . . . . . . . . 84 250-8501-004 . . . . . . . . . . . . . . . . . . . . . . . 201 250-8501-009 . . . . . . . . . . . . . . . . . . . . . . . 201 250-8501-010 . . . . . . . . . . . . . . . . . . . . . . . 201 250-8501-013 . . . . . . . . . . . . . . . . . . . . . . . 201 259-8760-000 . . . . . . . . . . . . . . . . . . . . . . . 207 274-5016-002 . . . . . . . . . . . . . . . . . . . . . . . 187 274-7003-000 . . . . . . . . . . . . . . . . . . . . . . . 187 274-7048-000 . . . . . . . . . . . . . . . . . . . . . . . 187 304-0444-000 . . . . . . . . . . . . . . . . . . . . . . . . 84 304-8810-000 . . . . . . . . . . . . . . . . . . . . . 40, 82 304-8811-000 . . . . . . . . . . . . . . . . . . . . . 40, 82 304-8812-000 . . . . . . . . . . . . . . . . . . . . . 40, 82 304-8813-000 . . . . . . . . . . . . . . . . . . . . . 40, 82 323-7010-000 . . . . . . . . . . . . . . . . . . . . . . . 187 330-5291-081-02 . . . . . . . . . . . . . . . . . . . . . 195 330-8753-101 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8753-102 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8753-103 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8754-101 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8754-102 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8754-103 . . . . . . . . . . . . . . . . . . . . . . . . 41 330-8782-001 . . . . . . . . . . . . . . . . . . . 187, 195 330-8944-000 . . . . . . . . . . . . . . . . . . . . . . . 195 330-8944-001 . . . . . . . . . . . . . . . . . . . . . . . 187 980-0005-722 . . . . . . . . . . . . . . . . . . . . . . . 187 980-0008-135 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-0008-136 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-345 . . . . . . . . . . . . . . . . . . . . . . . 202 980-2000-346 . . . . . . . . . . . . . . . . . . . . . . . 202 980-2000-347 . . . . . . . . . . . . . . . . . . . . . . . 202 980-2000-348 . . . . . . . . . . . . . . . . . . . . . . . 202 980-2000-349 . . . . . . . . . . . . . . . . . . . . . . . 202 980-2000-426 . . . . . . . . . . . . . . . . . . . . . . . 187 980-2000-858 . . . . . . . . . . . . . . . . . . . . . . . 209 980-2000-859 . . . . . . . . . . . . . . . . . . . . . . . 209 980-2000-860 . . . . . . . . . . . . . . . . . . . . . . . 211 980-2000-923 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-924 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-925 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-926 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-943 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-944 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-945 . . . . . . . . . . . . . . . . . . . . . . . . 83 980-2000-946 . . . . . . . . . . . . . . . . . . . . . . . . 83 995-0001-244 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-325 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-584 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-585 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-604 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-739 . . . . . . . . . . . . . . . . . . . . . . . 187 995-0001-761 . . . . . . . . . . . . . . . . . . . . . . . . 85 995-2000-000 . . . . . . . . . . . . . . . . . . . . . . . . 83 995-2000-092 . . . . . . . . . . . . . . . . . . . . . . . 211 995-2000-094 . . . . . . . . . . . . . . . . . . . . . . . . 84 995-2000-110 . . . . . . . . . . . . . . . . . . . . . . . . 85 ABT-607 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 CA111972-11 . . . . . . . . . . . . . . . . . . . . . . . . . 98 Part Number Index 283 Reader's Resource D Subminiature 284 Part Number Page DAJTE3W3P6-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTE3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTE3W3P9 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3W3P9-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTE3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTE3W3S1 . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3W3S1-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTE3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTE3W3S5 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3W3S5-1AON . . . . . . . . . . . . . . . . . . . 125 DAJTE3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTE3W3S6 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3W3S6-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTE3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTE3W3S9 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3W3S9-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTE3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTE3WK3P1. . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3WK3P1-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTE3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTE3WK3P5 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3WK3P5-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTE3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTE3WK3P6 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3WK3P6-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTE3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTE3WK3P9 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTE3WK3P9-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTE3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTE3WK3S1. . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3WK3S1-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTE3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTE3WK3S5 . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3WK3S5-1AON . . . . . . . . . . . . . . . . . 125 DAJTE3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTE3WK3S6 . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3WK3S6-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTE3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTE3WK3S9 . . . . . . . . . . . . . . . . . . . . . . 129 DAJTE3WK3S9-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTE3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTX15P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DAJTX15S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 DAJTX3W3KP1-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTX3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3W3P1-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTX3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTX3W3P5 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3W3P5-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTX3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTX3W3P6 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3W3P6-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTX3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTX3W3P9 . . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3W3P9-1A0N . . . . . . . . . . . . . . . . . . . 124 DAJTX3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126 DAJTX3W3S1 . . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3W3S1-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTX3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTX3W3S5 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3W3S5-1AON . . . . . . . . . . . . . . . . . . . 125 DAJTX3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTX3W3S6 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3W3S6-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTX3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTX3W3S9 . . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3W3S9-1A0N . . . . . . . . . . . . . . . . . . . 125 DAJTX3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127 DAJTX3WK3P1. . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTX3WK3P5 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3WK3P5-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTX3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTX3WK3P6 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3WK3P6-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTX3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTX3WK3P9 . . . . . . . . . . . . . . . . . . . . . . 128 DAJTX3WK3P9-1A0N . . . . . . . . . . . . . . . . . . 124 DAJTX3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . 126 DAJTX3WK3S1. . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3WK3S1-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTX3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTX3WK3S5 . . . . . . . . . . . . . . . . . . . . . . 129 Part Number Index Part Number Page DAJTX3WK3S5-1AON . . . . . . . . . . . . . . . . . 125 DAJTX3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTX3WK3S6 . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3WK3S6-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTX3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . 127 DAJTX3WK3S9 . . . . . . . . . . . . . . . . . . . . . . 129 DAJTX3WK3S9-1A0N . . . . . . . . . . . . . . . . . . 125 DAJTX3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . 127 DAM-11W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DAM-11W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DAM-11W1P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DAM-11W1P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DAM-11W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-11W1P-NMC-77 . . . . . . . . . . . . . . . . . . 195 DAM-11W1P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DAM-11W1P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DAM-11W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DAM-11W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DAM-11W1S-NMB-76 . . . . . . . . . . . . . . . . . . 195 DAM-11W1S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DAM-11W1S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-11W1S-NMC-77 . . . . . . . . . . . . . . . . . . 195 DAM-11W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DAM-11W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DAM-15S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195 DAM-15S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195 DAM-3W3P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DAM-3W3P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DAM-3W3P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DAM-3W3P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-3W3P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DAM-3W3P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DAM-3W3S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DAM-3W3S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DAM-3W3S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-3W3S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DAM-3W3S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DAM-3WK3P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DAM-3WK3P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DAM-3WK3P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DAM-3WK3P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DAM-3WK3S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DAM-3WK3S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DAM-3WK3S-OL2-A197 . . . . . . . . . . . . . . . . 77 DAM-3WK3S-OL4-A197 . . . . . . . . . . . . . . . . 77 DAM-7W2P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DAM-7W2P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DAM-7W2P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DAM-7W2P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DAM-7W2P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-7W2P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DAM-7W2P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DAM-7W2S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DAM-7W2S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DAM-7W2S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DAM-7W2S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DAM-7W2S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DAM-7W2S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DAM11W1P1A0NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1P1A7NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1P1A9NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1PF179ANMBK52 . . . . . . . . . . . . . . 195 DAM11W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DAM11W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DAM11W1PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM11W1POL3NMBK52 . . . . . . . . . . . . . . . 195 DAM11W1S1A0NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1S1A7NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1S1A9NNMBK52. . . . . . . . . . . . . . . 195 DAM11W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAM11W1SF179ANMBK52 . . . . . . . . . . . . . . 195 DAM11W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DAM11W1SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM11W1SOL3NMBK52 . . . . . . . . . . . . . . . 195 DAM15P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAM15P1A0NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15P1A7NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15P1A9NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAM15PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAM15PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PE . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Part Number Page DAM15PF . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAM15PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138 DAM15PF179A . . . . . . . . . . . . . . . . . . . . . . . 138 DAM15PF179ANMBK52 . . . . . . . . . . . . . . . . 195 DAM15PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAM15PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAM15PL . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174 DAM15PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAM15PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180 DAM15PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178 DAM15PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178 DAM15PNM*1AON . . . . . . . . . . . . . . . . . . . . 176 DAM15PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195 DAM15PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DAM15PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DAM15PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195 DAM15PNMC77 . . . . . . . . . . . . . . . . . . . . . . 195 DAM15POL3NM . . . . . . . . . . . . . . . . . . . . . . 172 DAM15POL3NMBK52 . . . . . . . . . . . . . . . . . . 195 DAM15PP. . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAM15PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAM15PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAM15PX . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAM15PZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAM15S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAM15S1A0NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15S1A7NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15S1A9NNMBK52 . . . . . . . . . . . . . . . . . 195 DAM15SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM15SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAM15SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SE . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM15SF . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAM15SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139 DAM15SF179A . . . . . . . . . . . . . . . . . . . . . . . 139 DAM15SF179ANMBK52 . . . . . . . . . . . . . . . . 195 DAM15SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM15SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAM15SL . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175 DAM15SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM15SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181 DAM15SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179 DAM15SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179 DAM15SNM*1AON . . . . . . . . . . . . . . . . . . . . 177 DAM15SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DAM15SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DAM15SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173 DAM15SOL3NMBK52 . . . . . . . . . . . . . . . . . . 195 DAM15SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAM15SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAM15SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAM15SX . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM15SZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAM3W3P-NMC-77 . . . . . . . . . . . . . . . . . . . 195 DAM3W3PK87. . . . . . . . . . . . . . . . . . . . . . . . 78 DAM3W3PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DAM3W3PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM3W3PNMC76 . . . . . . . . . . . . . . . . . . . . 195 DAM3W3POL3NMBK52 . . . . . . . . . . . . . . . . 195 DAM3W3S-NMC-76 . . . . . . . . . . . . . . . . . . . 195 DAM3W3SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DAM3W3SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DAM3W3SNMB76 . . . . . . . . . . . . . . . . . . . . 195 DAM3W3SNMB77 . . . . . . . . . . . . . . . . . . . . 195 DAM3W3SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM3WK3PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DAM3WK3PNM . . . . . . . . . . . . . . . . . . . . . . 188 DAM3WK3SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAM3WK3SNM . . . . . . . . . . . . . . . . . . . . . . 189 DAM53512-1405 . . . . . . . . . . . . . . . . . . . . . . 49 DAM7W2P1A0NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2P1A7NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2P1A9NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2PF179ANMBK52 . . . . . . . . . . . . . . 195 DAM7W2PK87. . . . . . . . . . . . . . . . . . . . . . . . 78 DAM7W2PNM . . . . . . . . . . . . . . . . . . . . . . . 188 Part Number Page DAM7W2PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM7W2POL3NMBK52 . . . . . . . . . . . . . . . . 195 DAM7W2S-NMC-77 . . . . . . . . . . . . . . . . . . . 195 DAM7W2S1A0NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2S1A7NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2S1A9NNMBK52 . . . . . . . . . . . . . . . 195 DAM7W2SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DAM7W2SF179ANMBK52 . . . . . . . . . . . . . . 195 DAM7W2SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DAM7W2SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DAM7W2SOL3NMBK52 . . . . . . . . . . . . . . . . 195 DAMA15PNM . . . . . . . . . . . . . . . . . . . . . . . . 182 DAMA15PNMBK52 . . . . . . . . . . . . . . . . . . . . 195 DAMA15SNM . . . . . . . . . . . . . . . . . . . . . . . . 183 DAMA15SNMBK52 . . . . . . . . . . . . . . . . . . . . 195 DAMA26PNM . . . . . . . . . . . . . . . . . . . . . . . . 184 DAMA26SNM . . . . . . . . . . . . . . . . . . . . . . . . 185 DAMAY15PNM . . . . . . . . . . . . . . . . . . . . . . . 182 DAMAY15SNM . . . . . . . . . . . . . . . . . . . . . . . 183 DAMAY26PNM . . . . . . . . . . . . . . . . . . . . . . . 184 DAMAY26SNM . . . . . . . . . . . . . . . . . . . . . . . 185 DAMB-11W1S-NMB-77 . . . . . . . . . . . . . . . . . 195 DAMB-15S-NMC-77 . . . . . . . . . . . . . . . . . . . 195 DAMB-7W2S-NMB-76 . . . . . . . . . . . . . . . . . 195 DAMB-7W2S-NMB-77 . . . . . . . . . . . . . . . . . 195 DAMB15SNMB77 . . . . . . . . . . . . . . . . . . . . . 195 DAMB15SNMC76 . . . . . . . . . . . . . . . . . . . . . 195 DAMC11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMC11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DAMC11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMC11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMC11H1PJK87. . . . . . . . . . . . . . . . . . . . . . 60 DAMC11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMC11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DAMC11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMC15PJK87. . . . . . . . . . . . . . . . . . . . . . . . 16 DAMC15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17 DAMC3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMC3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMC3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMC3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMC3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44 DAMC3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50 DAMC3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45 DAMC3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51 DAMC3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMC3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMC3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60 DAMC3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61 DAMC3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMC3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMC3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64 DAMC3PK3SVA197TM . . . . . . . . . . . . . . . . . 65 DAMC7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMC7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMC7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMC7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMC7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMC7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMC7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMC7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMD11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMD11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DAMD11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMD11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMD11H1PJK87. . . . . . . . . . . . . . . . . . . . . . 60 DAMD11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMD11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DAMD11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMD15PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DAMD15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17 DAMD3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMD3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMD3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMD3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMD3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44 DAMD3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50 DAMD3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45 DAMD3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51 DAMD3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMD3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMD3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60 DAMD3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DAMMN11V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DAMMN11V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DAMMN3C3PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMN3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMN3CK3PN . . . . . . . . . . . . . . . . . . . . . 150 DAMMN3CK3SN. . . . . . . . . . . . . . . . . . . . . . 151 DAMMN3H3PN . . . . . . . . . . . . . . . . . . . . . . 158 DAMMN3H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMN3HK3PN . . . . . . . . . . . . . . . . . . . . . 158 DAMMN3HK3SN . . . . . . . . . . . . . . . . . . . . . 159 DAMMN3V3PN. . . . . . . . . . . . . . . . . . . . . . . 162 DAMMN3V3SN. . . . . . . . . . . . . . . . . . . . . . . 163 DAMMN3VK3PN . . . . . . . . . . . . . . . . . . . . . 162 DAMMN3VK3SN . . . . . . . . . . . . . . . . . . . . . 163 DAMMN7C2PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMN7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMN7H2PN . . . . . . . . . . . . . . . . . . . . . . 158 DAMMN7H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMN7V2PN. . . . . . . . . . . . . . . . . . . . . . . 162 DAMMN7V2SN. . . . . . . . . . . . . . . . . . . . . . . 163 DAMMP11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMP11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMP11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMP11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMP3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMP3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMP3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMP3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMP3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMP3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMP3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMP3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMP7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMP7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMP7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMP7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMV11C1PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMV11C1SN . . . . . . . . . . . . . . . . . . . . . . 151 DAMMV11H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DAMMV11H1SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMV11V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DAMMV11V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DAMMV3C3PN . . . . . . . . . . . . . . . . . . . . . . . 150 DAMMV3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMV3CK3PN . . . . . . . . . . . . . . . . . . . . . 150 DAMMV3CK3SN . . . . . . . . . . . . . . . . . . . . . . 151 DAMMV3H3PN. . . . . . . . . . . . . . . . . . . . . . . 158 DAMMV3H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMV3HK3PN . . . . . . . . . . . . . . . . . . . . . 158 DAMMV3HK3SN . . . . . . . . . . . . . . . . . . . . . 159 DAMMV3V3PN . . . . . . . . . . . . . . . . . . . . . . . 162 DAMMV3V3SN . . . . . . . . . . . . . . . . . . . . . . . 163 DAMMV3VK3PN . . . . . . . . . . . . . . . . . . . . . . 162 DAMMV3VK3SN. . . . . . . . . . . . . . . . . . . . . . 163 DAMMV7C2PN . . . . . . . . . . . . . . . . . . . . . . . 150 DAMMV7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMV7H2PN. . . . . . . . . . . . . . . . . . . . . . . 158 DAMMV7H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMV7V2PN . . . . . . . . . . . . . . . . . . . . . . . 162 DAMMV7V2SN . . . . . . . . . . . . . . . . . . . . . . . 163 DAMMY11W1P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMMY11W1S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMMY15P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAMMY15S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAMMY3W3P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMMY3W3S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMMY3WK3P . . . . . . . . . . . . . . . . . . . . . . 166 DAMMY3WK3S . . . . . . . . . . . . . . . . . . . . . . 167 DAMMY7W2P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMMY7W2S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMMZ11C1PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMZ11C1SN. . . . . . . . . . . . . . . . . . . . . . . 151 DAMMZ11H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DAMMZ11H1SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMZ11V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DAMMZ11V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DAMMZ3C3PN . . . . . . . . . . . . . . . . . . . . . . . 150 DAMMZ3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMZ3CK3PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMZ3CK3SN . . . . . . . . . . . . . . . . . . . . . . 151 DAMMZ3H3PN . . . . . . . . . . . . . . . . . . . . . . . 158 DAMMZ3H3SN . . . . . . . . . . . . . . . . . . . . . . . 159 DAMMZ3HK3PN . . . . . . . . . . . . . . . . . . . . . . 158 Part Number Page DAMMZ3HK3SN . . . . . . . . . . . . . . . . . . . . . . 159 DAMMZ3V3PN . . . . . . . . . . . . . . . . . . . . . . . 162 DAMMZ3V3SN . . . . . . . . . . . . . . . . . . . . . . . 163 DAMMZ3VK3PN . . . . . . . . . . . . . . . . . . . . . . 162 DAMMZ3VK3SN . . . . . . . . . . . . . . . . . . . . . . 163 DAMMZ7C2PN . . . . . . . . . . . . . . . . . . . . . . . 150 DAMMZ7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151 DAMMZ7H2PN . . . . . . . . . . . . . . . . . . . . . . . 158 DAMMZ7H2SN . . . . . . . . . . . . . . . . . . . . . . . 159 DAMMZ7V2PN . . . . . . . . . . . . . . . . . . . . . . . 162 DAMMZ7V2SN . . . . . . . . . . . . . . . . . . . . . . . 163 DAMN11C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DAMN11C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DAMN11C1SNA197 . . . . . . . . . . . . . . . . . . . . 53 DAMN11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMN11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DAMN11H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DAMN11H1SNA197 . . . . . . . . . . . . . . . . . . . . 67 DAMN11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMN15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DAMN15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DAMN3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMN3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMN3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMN3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMN3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52 DAMN3CK3PYK87TM . . . . . . . . . . . . . . . . . . 56 DAMN3CK3SNA197TM . . . . . . . . . . . . . . . . . 53 DAMN3CK3SYA197TM . . . . . . . . . . . . . . . . . 57 DAMN3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMN3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMN3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMN3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMN3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66 DAMN3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70 DAMN3HK3SNA197TM . . . . . . . . . . . . . . . . . 67 DAMN3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71 DAMN7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMN7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMN7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMN7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMN7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMN7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMN7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMN7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMP11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMP11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DAMP11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMP11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMP11H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMP11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMP11P1PVK87. . . . . . . . . . . . . . . . . . . . . . 64 DAMP11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMP15PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16 DAMP15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17 DAMP3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMP3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMP3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMP3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMP3CK3PJK87TM. . . . . . . . . . . . . . . . . . . 44 DAMP3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50 DAMP3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45 DAMP3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51 DAMP3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMP3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMP3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60 DAMP3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61 DAMP3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMP3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMP3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64 DAMP3PK3SVA197TM . . . . . . . . . . . . . . . . . . 65 DAMP7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMP7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMP7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMP7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMP7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMP7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMP7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMP7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMV11C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DAMV11C1PYK87. . . . . . . . . . . . . . . . . . . . . . 56 DAMV11C1SNA197. . . . . . . . . . . . . . . . . . . . . 53 DAMV11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DAMM15SE . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM15SF . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAMM15SF179 . . . . . . . . . . . . . . . . . . . . . . 139 DAMM15SF179A . . . . . . . . . . . . . . . . . . . . . 139 DAMM15SG . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAMM15SH . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM15SK . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAMM15SL . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAMM15SM . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM15SP . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAMM15SR . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAMM15SS . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAMM15SW . . . . . . . . . . . . . . . . . . . . . . . . 133 DAMM15SX . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM15SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM3W3P . . . . . . . . . . . . . . . . . . . . . . . . 166 DAMM3W3S . . . . . . . . . . . . . . . . . . . . . . . . 167 DAMM3WK3P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMM3WK3S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMM7W2P . . . . . . . . . . . . . . . . . . . . . . . . 166 DAMM7W2S . . . . . . . . . . . . . . . . . . . . . . . . 167 DAMMC11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMC11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMC11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMC11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMC3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMC3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMC3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMC3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMC3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMC3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMC3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMC3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMC7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMC7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMC7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMC7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMD11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMD11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMD11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMD11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMD3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMD3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMD3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMD3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMD3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMD3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMD3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMD3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMD7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMD7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMD7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMD7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMME11W1P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMME11W1S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMME15P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAMME15S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAMME3W3P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMME3W3S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMME3WK3P . . . . . . . . . . . . . . . . . . . . . . 166 DAMME3WK3S . . . . . . . . . . . . . . . . . . . . . . 167 DAMME7W2P . . . . . . . . . . . . . . . . . . . . . . . 166 DAMME7W2S . . . . . . . . . . . . . . . . . . . . . . . 167 DAMMG11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMG11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMG11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMG11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMG3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMG3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMG3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DAMMG3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DAMMG3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMG3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMG3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DAMMG3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DAMMG7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DAMMG7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DAMMG7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DAMMG7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DAMMN11C1PN . . . . . . . . . . . . . . . . . . . . . . 150 DAMMN11C1SN . . . . . . . . . . . . . . . . . . . . . . 151 DAMMN11H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DAMMN11H1SN . . . . . . . . . . . . . . . . . . . . . . 159 Reader's Part Number Page DAMD3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMD3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMD3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64 DAMD3PK3SVA197TM . . . . . . . . . . . . . . . . . 65 DAMD7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMD7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMD7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMD7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMD7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMD7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMD7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMD7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAME11W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DAME11W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 DAME15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAME15S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAME3W3PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DAME3W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAME3WK3PK87 . . . . . . . . . . . . . . . . . . . . . 78 DAME3WK3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DAME7W2PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DAME7W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAMG11C1PJK87. . . . . . . . . . . . . . . . . . . . . . 44 DAMG11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DAMG11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMG11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMG11H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DAMG11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMG11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DAMG11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMG15PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DAMG15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17 DAMG3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMG3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMG3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMG3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMG3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44 DAMG3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50 DAMG3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45 DAMG3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51 DAMG3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMG3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMG3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60 DAMG3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61 DAMG3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMG3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMG3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64 DAMG3PK3SVA197TM . . . . . . . . . . . . . . . . . 65 DAMG7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DAMG7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DAMG7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DAMG7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DAMG7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DAMG7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DAMG7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DAMG7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DAMM11W1P . . . . . . . . . . . . . . . . . . . . . . . . 166 DAMM11W1S . . . . . . . . . . . . . . . . . . . . . . . . 167 DAMM15P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAMM15PA . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PB . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15PC . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAMM15PD . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PE . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15PF . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAMM15PF179 . . . . . . . . . . . . . . . . . . . . . . 138 DAMM15PF179A . . . . . . . . . . . . . . . . . . . . . 138 DAMM15PG . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PH . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15PK . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAMM15PL . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PM . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15PP . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAMM15PR . . . . . . . . . . . . . . . . . . . . . . . . . 134 DAMM15PS . . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PW. . . . . . . . . . . . . . . . . . . . . . . . . 132 DAMM15PX . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136 DAMM15S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAMM15SA . . . . . . . . . . . . . . . . . . . . . . . . . 133 DAMM15SB . . . . . . . . . . . . . . . . . . . . . . . . . 137 DAMM15SC . . . . . . . . . . . . . . . . . . . . . . . . . 135 DAMM15SD . . . . . . . . . . . . . . . . . . . . . . . . . 133 Part Number Index 285 Reader's Resource D Subminiature 286 Part Number Page DAMV11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DAMV11H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DAMV11H1SNA197 . . . . . . . . . . . . . . . . . . . . 67 DAMV11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMV15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DAMV15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DAMV3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMV3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMV3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMV3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMV3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52 DAMV3CK3PYK87TM . . . . . . . . . . . . . . . . . . 56 DAMV3CK3SNA197TM . . . . . . . . . . . . . . . . . 53 DAMV3CK3SYA197TM. . . . . . . . . . . . . . . . . . 57 DAMV3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMV3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMV3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMV3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMV3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66 DAMV3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70 DAMV3HK3SNA197TM . . . . . . . . . . . . . . . . . 67 DAMV3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71 DAMV7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMV7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMV7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMV7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMV7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMV7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMV7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMV7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMY11W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DAMY11W1PNM . . . . . . . . . . . . . . . . . . . . . . 188 DAMY11W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 DAMY11W1SNM . . . . . . . . . . . . . . . . . . . . . . 189 DAMY15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DAMY15PNM . . . . . . . . . . . . . . . . . . . . . . . . 180 DAMY15PNM*1AON . . . . . . . . . . . . . . . . . . . 176 DAMY15POL3NM . . . . . . . . . . . . . . . . . . . . . 172 DAMY15S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DAMY15SNM . . . . . . . . . . . . . . . . . . . . . . . . 181 DAMY15SNM*1AON . . . . . . . . . . . . . . . . . . . 177 DAMY15SOL3NM . . . . . . . . . . . . . . . . . . . . . 173 DAMY3W3PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DAMY3W3PNM . . . . . . . . . . . . . . . . . . . . . . 188 DAMY3W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAMY3W3SNM . . . . . . . . . . . . . . . . . . . . . . 189 DAMY3WK3PK87 . . . . . . . . . . . . . . . . . . . . . 78 DAMY3WK3PNM . . . . . . . . . . . . . . . . . . . . . 188 DAMY3WK3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DAMY3WK3SNM . . . . . . . . . . . . . . . . . . . . . 189 DAMY7W2PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DAMY7W2PNM . . . . . . . . . . . . . . . . . . . . . . 188 DAMY7W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DAMY7W2SNM . . . . . . . . . . . . . . . . . . . . . . 189 DAMZ11C1PNK87. . . . . . . . . . . . . . . . . . . . . . 52 DAMZ11C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMZ11C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMZ11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMZ11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DAMZ11H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMZ11H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMZ11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMZ15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DAMZ15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DAMZ3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMZ3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMZ3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DAMZ3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMZ3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52 DAMZ3CK3PYK87TM. . . . . . . . . . . . . . . . . . . 56 DAMZ3CK3SNA197TM . . . . . . . . . . . . . . . . . . 53 DAMZ3CK3SYA197TM . . . . . . . . . . . . . . . . . . 57 DAMZ3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMZ3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMZ3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMZ3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DAMZ3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66 DAMZ3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70 DAMZ3HK3SNA197TM. . . . . . . . . . . . . . . . . . 67 DAMZ3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71 DAMZ7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DAMZ7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DAMZ7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53 Part Number Index Part Number Page DAMZ7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DAMZ7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DAMZ7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DAMZ7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DAMZ7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DANG15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DANG15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DANGE15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DANGE15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DANGL15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DANGL15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DANGX15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DANGX15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DANGZ15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DANGZ15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DAW15P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DAW15P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DAW15S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DAW15S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DAWE15P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DAWE15P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38 DAWE15S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DAWE15S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39 DAX15P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DAX15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DAX15S-0L2-A197-146 . . . . . . . . . . . . . . . . . . 11 DAX15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DB-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DB-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DB111807-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DB111807-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DB111811 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 DB111811-2 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DB111949-43 . . . . . . . . . . . . . . . . . . . . . . . . . 48 DB115339-2 . . . . . . . . . . . . . . . . . . . . . . . . 207 DB115339-22 . . . . . . . . . . . . . . . . . . . . . . . 205 DB115386-102A . . . . . . . . . . . . . . . . . . . . . . 195 DB115386-3B . . . . . . . . . . . . . . . . . . . . . . . 207 DB121073-151 . . . . . . . . . . . . . . . . . . . . . . . 200 DB121073-51 . . . . . . . . . . . . . . . . . . . . . . . . 200 DB19678-168 . . . . . . . . . . . . . . . . . . . . 193, 195 DB19678-171 . . . . . . . . . . . . . . . . . . . . . . . . 195 DB19678-175 . . . . . . . . . . . . . . . . . . . . . . . . 195 DB19678-2 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DB19977-2 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DB19977-43 . . . . . . . . . . . . . . . . . . . . . 193, 195 DB20962 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DB20962-18 . . . . . . . . . . . . . . . . . . . . . . . . 192 DB22254 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 DB22255 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DB24659 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DB24659-15 . . . . . . . . . . . . . . . . . . . . . 192, 195 DB25P-0L2-K87. . . . . . . . . . . . . . . . . . . . . . . 10 DB25P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DB25P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DB25P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DB25P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DB25P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DB25P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DB25P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22 DB25P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DB25P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20 DB25P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DB25P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DB25P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DB25P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DB25P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12 DB25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DB25S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11 DB25S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27 DB25S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27 DB25S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23 DB25S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23 DB25S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23 DB25S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25 DB25S-1AFN-A197. . . . . . . . . . . . . . . . . . . . . 23 DB25S-1AJN-A197. . . . . . . . . . . . . . . . . . . . . 25 DB25S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21 DB25S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27 DB25S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27 DB25S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25 DB25S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25 DB25S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13 Part Number Page DB25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DB50906-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DB51212 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DB51213 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DB51221-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210 DB51226-1B . . . . . . . . . . . . . . . . . . . . . . . . 206 DB53750-2 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DBA13W3PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DBA13W3SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DBA17W2PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DBA17W2SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DBA21W1PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DBA21W1SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DBA25PK87FO . . . . . . . . . . . . . . . . . . . . . . . 36 DBA25SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37 DBA5W5PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DBA5W5SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DBA9W4PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DBA9W4SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DBBS-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 DBBU111511 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DBE25P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DBE25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DBE25S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DBE25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DBJK25P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110 DBJK25P*-1A5N . . . . . . . . . . . . . . . . . . . . . 118 DBJK25P*-1A6N . . . . . . . . . . . . . . . . . . . . . 118 DBJK25P*-1A7N . . . . . . . . . . . . . . . . . . . . . 114 DBJK25P*-1A8N . . . . . . . . . . . . . . . . . . . . . 114 DBJK25P*-1A9N . . . . . . . . . . . . . . . . . . . . . 114 DBJK25P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116 DBJK25P*-1AFN . . . . . . . . . . . . . . . . . . . . . . 114 DBJK25P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116 DBJK25P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114 DBJK25P*-1AJN . . . . . . . . . . . . . . . . . . . . . . 116 DBJK25P*-1APN . . . . . . . . . . . . . . . . . . . . . 118 DBJK25P*-1ATN . . . . . . . . . . . . . . . . . . . . . 118 DBJK25P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118 DBJK25P*-1AVN . . . . . . . . . . . . . . . . . . . . . 116 DBJK25P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116 DBJK25P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108 DBJK25P*-1U7N . . . . . . . . . . . . . . . . . . . . . 112 DBJK25P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112 DBJK25P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DBJK25S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111 DBJK25S*-1A5N . . . . . . . . . . . . . . . . . . . . . 119 DBJK25S*-1A6N . . . . . . . . . . . . . . . . . . . . . 119 DBJK25S*-1A7N . . . . . . . . . . . . . . . . . . . . . 115 DBJK25S*-1A8N . . . . . . . . . . . . . . . . . . . . . 115 DBJK25S*-1A9N . . . . . . . . . . . . . . . . . . . . . 115 DBJK25S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117 DBJK25S*-1AFN. . . . . . . . . . . . . . . . . . . . . . 115 DBJK25S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117 DBJK25S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115 DBJK25S*-1AJN . . . . . . . . . . . . . . . . . . . . . . 117 DBJK25S*-1APN . . . . . . . . . . . . . . . . . . . . . 119 DBJK25S*-1ATN . . . . . . . . . . . . . . . . . . . . . 119 DBJK25S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119 DBJK25S*-1AVN . . . . . . . . . . . . . . . . . . . . . 117 DBJK25S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117 DBJK25S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109 DBJK25S*-1U7N . . . . . . . . . . . . . . . . . . . . . 113 DBJK25S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113 DBJK25S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121 DBJKE25P*-1A0N . . . . . . . . . . . . . . . . . . . . 110 DBJKE25P*-1U0N . . . . . . . . . . . . . . . . . . . . 108 DBJKE25P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DBJKE25P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DBJKE25S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DBJKE25S*-1U0N . . . . . . . . . . . . . . . . . . . . 109 DBJKE25S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121 DBJKE25S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DBJKX25P*-1A0N . . . . . . . . . . . . . . . . . . . . 110 DBJKX25P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DBJKX25P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DBJKX25S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DBJKX25S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121 DBJKX25S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DBJT25P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DBJT25S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DBJTE25P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DBJTE25S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 Part Number Page DBJTX25P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DBJTX25S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 DBM-13W3P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DBM-13W3P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DBM-13W3P-NMB-76 . . . . . . . . . . . . . . . . . 195 DBM-13W3P-NMC-76 . . . . . . . . . . . . . . . . . 195 DBM-13W3P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DBM-13W3P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DBM-13W3S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DBM-13W3S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DBM-13W3S-NMB-77 . . . . . . . . . . . . . . . . . 195 DBM-13W3S-NMC-76 . . . . . . . . . . . . . . . . . 195 DBM-13W3S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DBM-13W3S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DBM-17W2P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DBM-17W2P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DBM-17W2P-NMB-76 . . . . . . . . . . . . . . . . . 195 DBM-17W2P-NMC-76 . . . . . . . . . . . . . . . . . 195 DBM-17W2P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DBM-17W2P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DBM-17W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DBM-17W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DBM-17W2S-NMC-76 . . . . . . . . . . . . . . . . . 195 DBM-17W2S-NMC-77 . . . . . . . . . . . . . . . . . 195 DBM-17W2S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DBM-17W2S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DBM-21W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DBM-21W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DBM-21W1P-NMB-76. . . . . . . . . . . . . . . . . . 195 DBM-21W1P-NMB-77. . . . . . . . . . . . . . . . . . 195 DBM-21W1P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DBM-21W1P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DBM-21W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DBM-21W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DBM-21W1S-NMB-76. . . . . . . . . . . . . . . . . . 195 DBM-21W1S-NMB-77. . . . . . . . . . . . . . . . . . 195 DBM-21W1S-NMC-76 . . . . . . . . . . . . . . . . . 195 DBM-21W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DBM-21W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DBM-25S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195 DBM-25S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195 DBM-25S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DBM-5W5P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DBM-5W5P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DBM-5W5P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DBM-5W5P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DBM-5W5P-NMC-77 . . . . . . . . . . . . . . . . . . 195 DBM-5W5P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DBM-5W5P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DBM-5W5S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DBM-5W5S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DBM-5W5S-NMB-76 . . . . . . . . . . . . . . . . . . 195 DBM-5W5S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DBM-5W5S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DBM-5W5S-NMC-77 . . . . . . . . . . . . . . . . . . 195 DBM-5W5S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DBM-5W5S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DBM-9W4P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DBM-9W4P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DBM-9W4P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DBM-9W4P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DBM-9W4P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DBM-9W4P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DBM-9W4S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DBM-9W4S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DBM-9W4S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DBM-9W4S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DBM-9W4S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DBM-9W4S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DBM13W3P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DBM13W3P1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3P1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3P1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3PF179ANMBK52 . . . . . . . . . . . . . 195 DBM13W3PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DBM13W3PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBM13W3PNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM13W3POL3NMBK52 . . . . . . . . . . . . . . . 195 DBM13W3S-NMB-76 . . . . . . . . . . . . . . . . . . 195 DBM13W3S1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3S1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3S1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM13W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DBMC21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMC25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DBMC25SJA197. . . . . . . . . . . . . . . . . . . . . . . 17 DBMC5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMC5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMC5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMC5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMC5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMC5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMC5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMC5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMC9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMC9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMC9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMC9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMC9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMC9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMC9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMC9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMD13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMD13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMD13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMD13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMD13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMD13H3SJA197. . . . . . . . . . . . . . . . . . . . . 61 DBMD13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMD13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMD17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMD17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMD17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMD17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMD17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMD17H2SJA197. . . . . . . . . . . . . . . . . . . . . 61 DBMD17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMD17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMD21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMD21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMD21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMD21C1SVA197. . . . . . . . . . . . . . . . . . . . . 51 DBMD21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMD21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMD21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMD21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMD25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DBMD25SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DBMD5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMD5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMD5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMD5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMD5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMD5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMD5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMD5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMD9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMD9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMD9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMD9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMD9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMD9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMD9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMD9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBME13W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBME13W3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DBME17W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBME17W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 DBME21W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBME21W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 DBME25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBME25S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBME5W5PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DBME5W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBME9W4PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DBME9W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBMG13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMG13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMG13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMG13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMG13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMG13H3SJA197 . . . . . . . . . . . . . . . . . . . . 61 DBMG13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMG13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMG17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMG17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 Part Number Page DBMG17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMG17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMG17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMG17H2SJA197 . . . . . . . . . . . . . . . . . . . . 61 DBMG17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMG17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMG21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMG21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMG21C1SJA197. . . . . . . . . . . . . . . . . . . . . 45 DBMG21C1SVA197. . . . . . . . . . . . . . . . . . . . . 51 DBMG21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMG21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMG21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMG21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMG25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DBMG25SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DBMG5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMG5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMG5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMG5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMG5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMG5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMG5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMG5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMG9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMG9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMG9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMG9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMG9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMG9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMG9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMG9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMM13W3P. . . . . . . . . . . . . . . . . . . . . . . . 166 DBMM13W3S. . . . . . . . . . . . . . . . . . . . . . . . 167 DBMM17W2P. . . . . . . . . . . . . . . . . . . . . . . . 166 DBMM17W2S. . . . . . . . . . . . . . . . . . . . . . . . 167 DBMM21W1P . . . . . . . . . . . . . . . . . . . . . . . . 166 DBMM21W1S . . . . . . . . . . . . . . . . . . . . . . . . 167 DBMM25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBMM25PA . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PB . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25PC . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBMM25PD . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PE . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25PF . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBMM25PF179 . . . . . . . . . . . . . . . . . . . . . . 138 DBMM25PF179A . . . . . . . . . . . . . . . . . . . . . 138 DBMM25PG . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PH . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25PK . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBMM25PL . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PM . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25PP . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBMM25PR . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBMM25PS . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PW . . . . . . . . . . . . . . . . . . . . . . . . 132 DBMM25PX . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBMM25S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBMM25SA . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SB . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM25SC . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBMM25SD . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SE . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM25SF . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBMM25SF179 . . . . . . . . . . . . . . . . . . . . . . 139 DBMM25SF179A . . . . . . . . . . . . . . . . . . . . . 139 DBMM25SG . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SH . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM25SK . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBMM25SL . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SM . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM25SP . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBMM25SR . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBMM25SS . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SW . . . . . . . . . . . . . . . . . . . . . . . . 133 DBMM25SX . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM25SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBMM5W5S . . . . . . . . . . . . . . . . . . . . . . . . 167 DBMM9W4P . . . . . . . . . . . . . . . . . . . . . . . . 166 DBMM9W4S . . . . . . . . . . . . . . . . . . . . . . . . 167 DBMMC13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMC13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DBM25SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM25SF. . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBM25SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139 DBM25SF179A . . . . . . . . . . . . . . . . . . . . . . . 139 DBM25SF179ANMBK52 . . . . . . . . . . . . . . . . 195 DBM25SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBM25SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM25SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBM25SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBM25SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175 DBM25SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM25SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181 DBM25SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179 DBM25SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179 DBM25SNM*1AON. . . . . . . . . . . . . . . . . . . . 177 DBM25SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DBM25SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173 DBM25SOL3NMBK52 . . . . . . . . . . . . . . . . . 195 DBM25SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBM25SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBM25SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBM25SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBM25SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM25SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM5W5PNMB77 . . . . . . . . . . . . . . . . . . . . 195 DBM5W5PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBM5W5SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DBM5W5SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DBM5W5SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBM9W4P1A0NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4P1A7NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4P1A9NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4PF179ANMBK52 . . . . . . . . . . . . . . 195 DBM9W4PK87. . . . . . . . . . . . . . . . . . . . . . . . 78 DBM9W4PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DBM9W4PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBM9W4POL3NMBK52 . . . . . . . . . . . . . . . . 195 DBM9W4S1A0NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4S1A7NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4S1A9NNMBK52 . . . . . . . . . . . . . . . 195 DBM9W4SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DBM9W4SF179ANMBK52 . . . . . . . . . . . . . . 195 DBM9W4SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DBM9W4SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBM9W4SOL3NMBK52 . . . . . . . . . . . . . . . . 195 DBMA25PNM . . . . . . . . . . . . . . . . . . . . . . . . 182 DBMA25PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBMA25SNM . . . . . . . . . . . . . . . . . . . . . . . . 183 DBMA25SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DBMA44PNM . . . . . . . . . . . . . . . . . . . . . . . . 184 DBMA44SNM . . . . . . . . . . . . . . . . . . . . . . . . 185 DBMAY25PNM . . . . . . . . . . . . . . . . . . . . . . . 182 DBMAY25SNM . . . . . . . . . . . . . . . . . . . . . . . 183 DBMAY44PNM . . . . . . . . . . . . . . . . . . . . . . . 184 DBMAY44SNM . . . . . . . . . . . . . . . . . . . . . . . 185 DBMB-17W2S-NMB-76 . . . . . . . . . . . . . . . . 195 DBMB-25S-NMB-76 . . . . . . . . . . . . . . . . . . . 195 DBMB-25S-NMB-77 . . . . . . . . . . . . . . . . . . . 195 DBMB-25S-NMC-77 . . . . . . . . . . . . . . . . . . . 195 DBMB25SNMC76. . . . . . . . . . . . . . . . . . . . . 195 DBMC13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMC13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMC13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMC13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMC13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMC13H3SJA197. . . . . . . . . . . . . . . . . . . . . 61 DBMC13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMC13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMC17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMC17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMC17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMC17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMC17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMC17H2SJA197. . . . . . . . . . . . . . . . . . . . . 61 DBMC17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMC17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMC21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMC21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMC21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMC21C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMC21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMC21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMC21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 Reader's Part Number Page DBM13W3SF179ANMBK52 . . . . . . . . . . . . . 195 DBM13W3SNM . . . . . . . . . . . . . . . . . . . . . . 189 DBM13W3SNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM13W3SOL3NMBK52 . . . . . . . . . . . . . . . 195 DBM17W2P-NMC-77 . . . . . . . . . . . . . . . . . . 195 DBM17W2P1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2P1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2P1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2PF179ANMBK52 . . . . . . . . . . . . . 195 DBM17W2PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DBM17W2PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBM17W2PNMB77 . . . . . . . . . . . . . . . . . . . 195 DBM17W2PNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM17W2POL3NMBK52 . . . . . . . . . . . . . . . 195 DBM17W2S1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2S1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2S1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM17W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBM17W2SF179ANMBK52 . . . . . . . . . . . . . 195 DBM17W2SNM . . . . . . . . . . . . . . . . . . . . . . 189 DBM17W2SNMB77 . . . . . . . . . . . . . . . . . . . 195 DBM17W2SNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM17W2SOL3NMBK52 . . . . . . . . . . . . . . . 195 DBM21W1P1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1P1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1P1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1PF179ANMBK52 . . . . . . . . . . . . . . 195 DBM21W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DBM21W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DBM21W1PNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM21W1POL3NMBK52 . . . . . . . . . . . . . . . 195 DBM21W1S1A0NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1S1A7NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1S1A9NNMBK52 . . . . . . . . . . . . . . 195 DBM21W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBM21W1SF179ANMBK52 . . . . . . . . . . . . . . 195 DBM21W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DBM21W1SNMBK52 . . . . . . . . . . . . . . . . . . 195 DBM21W1SOL3NMBK52 . . . . . . . . . . . . . . . 195 DBM25P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBM25P1A0NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25P1A7NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25P1A9NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBM25PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25PF. . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBM25PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138 DBM25PF179A . . . . . . . . . . . . . . . . . . . . . . . 138 DBM25PF179ANMBK52 . . . . . . . . . . . . . . . . 195 DBM25PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBM25PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174 DBM25PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180 DBM25PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178 DBM25PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178 DBM25PNM*1AON. . . . . . . . . . . . . . . . . . . . 176 DBM25PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195 DBM25PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DBM25PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DBM25PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195 DBM25PNMC77 . . . . . . . . . . . . . . . . . . . . . . 195 DBM25POL3NM . . . . . . . . . . . . . . . . . . . . . . 172 DBM25POL3NMBK52 . . . . . . . . . . . . . . . . . 195 DBM25PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBM25PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DBM25PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DBM25PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25PZ. . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DBM25S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBM25S1A0NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25S1A7NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25S1A9NNMBK52. . . . . . . . . . . . . . . . . 195 DBM25SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DBM25SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DBM25SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DBM25SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Part Number Index 287 Reader's Resource D Subminiature 288 Part Number Page DBMMC13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMC13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMC17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMC17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMC17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMC17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMC21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMC21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMC21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMC21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMC5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMC5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMC5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMC5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMC9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMC9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMC9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMC9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMD13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMD13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMD13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMD13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMD17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMD17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMD17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMD17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMD21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMD21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMD21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMD21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMD5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMD5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMD5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMD5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMD9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMD9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMD9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMD9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMME13W3P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMME13W3S. . . . . . . . . . . . . . . . . . . . . . . 167 DBMME17W2P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMME17W2S. . . . . . . . . . . . . . . . . . . . . . . 167 DBMME21W1P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMME21W1S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMME25P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBMME25S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBMME5W5P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMME5W5S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMME9W4P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMME9W4S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMMG13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMG13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMG13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMG13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMG17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMG17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMG17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMG17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMG21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMG21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMG21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMG21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMG5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMG5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMG5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMG5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMG9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMG9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMG9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMG9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMN13C3PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMN13C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMN13H3PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMN13H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMN13V3PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMN13V3SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMN17C2PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMN17C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMN17H2PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMN17H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMN17V2PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMN17V2SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMN21C1PN . . . . . . . . . . . . . . . . . . . . . . 150 Part Number Index Part Number Page DBMMN21C1SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMN21H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMN21H1SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMN21V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMN21V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMN5C5PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMN5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMN5H5PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMN5H5SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMN5V5PN. . . . . . . . . . . . . . . . . . . . . . . 162 DBMMN5V5SN. . . . . . . . . . . . . . . . . . . . . . . 163 DBMMN9C4PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMN9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMN9H4PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMN9H4SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMN9V4PN. . . . . . . . . . . . . . . . . . . . . . . 162 DBMMN9V4SN. . . . . . . . . . . . . . . . . . . . . . . 163 DBMMP13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMP13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMP13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMP13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMP17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMP17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMP17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMP17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMP21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146 DBMMP21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147 DBMMP21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154 DBMMP21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155 DBMMP5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMP5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMP5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMP5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMP5W5P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMMP9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DBMMP9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DBMMP9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DBMMP9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DBMMV13C3PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMV13C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMV13H3PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMV13H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMV13V3PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMV13V3SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMV17C2PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMV17C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMV17H2PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMV17H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMV17V2PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMV17V2SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMV21C1PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMV21C1SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMV21H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMV21H1SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMV21V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMV21V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMV5C5PN . . . . . . . . . . . . . . . . . . . . . . . 150 DBMMV5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMV5H5PN. . . . . . . . . . . . . . . . . . . . . . . 158 DBMMV5H5SN. . . . . . . . . . . . . . . . . . . . . . . 159 DBMMV5V5PN . . . . . . . . . . . . . . . . . . . . . . . 162 DBMMV5V5SN . . . . . . . . . . . . . . . . . . . . . . . 163 DBMMV9C4PN . . . . . . . . . . . . . . . . . . . . . . . 150 DBMMV9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMV9H4PN. . . . . . . . . . . . . . . . . . . . . . . 158 DBMMV9H4SN. . . . . . . . . . . . . . . . . . . . . . . 159 DBMMV9V4PN . . . . . . . . . . . . . . . . . . . . . . . 162 DBMMV9V4SN . . . . . . . . . . . . . . . . . . . . . . . 163 DBMMY13W3P. . . . . . . . . . . . . . . . . . . . . . . 166 DBMMY13W3S. . . . . . . . . . . . . . . . . . . . . . . 167 DBMMY17W2P. . . . . . . . . . . . . . . . . . . . . . . 166 DBMMY17W2S. . . . . . . . . . . . . . . . . . . . . . . 167 DBMMY21W1P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMMY21W1S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMMY25P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBMMY25S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBMMY5W5P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMMY5W5S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMMY9W4P . . . . . . . . . . . . . . . . . . . . . . . 166 DBMMY9W4S . . . . . . . . . . . . . . . . . . . . . . . 167 DBMMZ13C3PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMZ13C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMZ13H3PN . . . . . . . . . . . . . . . . . . . . . . 158 Part Number Page DBMMZ13H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMZ13V3PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMZ13V3SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMZ17C2PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMZ17C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMZ17H2PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMZ17H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMZ17V2PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMZ17V2SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMZ21C1PN . . . . . . . . . . . . . . . . . . . . . . 150 DBMMZ21C1SN . . . . . . . . . . . . . . . . . . . . . . 151 DBMMZ21H1PN . . . . . . . . . . . . . . . . . . . . . . 158 DBMMZ21H1SN . . . . . . . . . . . . . . . . . . . . . . 159 DBMMZ21V1PN . . . . . . . . . . . . . . . . . . . . . . 162 DBMMZ21V1SN . . . . . . . . . . . . . . . . . . . . . . 163 DBMMZ5C5PN . . . . . . . . . . . . . . . . . . . . . . . 150 DBMMZ5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMZ5H5PN . . . . . . . . . . . . . . . . . . . . . . . 158 DBMMZ5H5SN . . . . . . . . . . . . . . . . . . . . . . . 159 DBMMZ5V5PN . . . . . . . . . . . . . . . . . . . . . . . 162 DBMMZ5V5SN . . . . . . . . . . . . . . . . . . . . . . . 163 DBMMZ9C4PN . . . . . . . . . . . . . . . . . . . . . . . 150 DBMMZ9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151 DBMMZ9H4PN . . . . . . . . . . . . . . . . . . . . . . . 158 DBMMZ9H4SN . . . . . . . . . . . . . . . . . . . . . . . 159 DBMMZ9V4PN . . . . . . . . . . . . . . . . . . . . . . . 162 DBMMZ9V4SN . . . . . . . . . . . . . . . . . . . . . . . 163 DBMN13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMN13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMN13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMN13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMN13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMN13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMN13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMN13H3SYA197 . . . . . . . . . . . . . . . . . . . . 71 DBMN17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMN17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMN17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMN17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMN17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMN17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMN17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMN17H2SYA197 . . . . . . . . . . . . . . . . . . . . 71 DBMN21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMN21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMN21C1SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMN21C1SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMN21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMN21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMN21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMN21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMN25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DBMN25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DBMN5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMN5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMN5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMN5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMN5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMN5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMN5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMN5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMN9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMN9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMN9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMN9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMN9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMN9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMN9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMN9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMP13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMP13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMP13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMP13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMP13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMP13H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMP13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMP13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMP17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMP17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMP17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DBMP17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DBMP17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMP17H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61 Part Number Page DBMP17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMP17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DBMP21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DBMP21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DBMP21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMP21C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMP21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DBMP21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMP21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DBMP21P1SVA197. . . . . . . . . . . . . . . . . . . . . 65 DBMP25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DBMP25SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17 DBMP5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMP5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMP5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMP5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMP5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMP5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMP5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMP5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMP5W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBMP5W5PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBMP9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DBMP9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DBMP9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DBMP9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DBMP9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DBMP9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DBMP9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DBMP9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DBMV13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMV13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMV13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMV13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMV13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMV13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMV13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMV13H3SYA197 . . . . . . . . . . . . . . . . . . . . 71 DBMV17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMV17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMV17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMV17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMV17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMV17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMV17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMV17H2SYA197 . . . . . . . . . . . . . . . . . . . . 71 DBMV21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMV21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMV21C1SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMV21C1SYA197. . . . . . . . . . . . . . . . . . . . . 57 DBMV21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMV21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMV21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMV21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMV25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DBMV25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DBMV5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMV5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMV5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMV5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMV5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMV5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMV5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMV5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMV9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMV9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMV9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMV9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMV9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMV9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMV9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMV9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMY13W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBMY13W3PNM . . . . . . . . . . . . . . . . . . . . . 188 DBMY13W3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DBMY13W3SNM . . . . . . . . . . . . . . . . . . . . . 189 DBMY17W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBMY17W2PNM . . . . . . . . . . . . . . . . . . . . . 188 DBMY17W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 DBMY17W2SNM . . . . . . . . . . . . . . . . . . . . . 189 DBMY21W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DBMY21W1PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBMY21W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DCJK37P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116 DCJK37P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108 DCJK37P*-1U7N . . . . . . . . . . . . . . . . . . . . . 112 DCJK37P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112 DCJK37P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DCJK37S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111 DCJK37S*-1A5N . . . . . . . . . . . . . . . . . . . . . 119 DCJK37S*-1A6N . . . . . . . . . . . . . . . . . . . . . 119 DCJK37S*-1A7N . . . . . . . . . . . . . . . . . . . . . 115 DCJK37S*-1A8N . . . . . . . . . . . . . . . . . . . . . 115 DCJK37S*-1A9N . . . . . . . . . . . . . . . . . . . . . 115 DCJK37S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117 DCJK37S*-1AFN . . . . . . . . . . . . . . . . . . . . . 115 DCJK37S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117 DCJK37S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115 DCJK37S*-1AJN. . . . . . . . . . . . . . . . . . . . . . 117 DCJK37S*-1APN . . . . . . . . . . . . . . . . . . . . . 119 DCJK37S*-1ATN . . . . . . . . . . . . . . . . . . . . . 119 DCJK37S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119 DCJK37S*-1AVN . . . . . . . . . . . . . . . . . . . . . 117 DCJK37S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117 DCJK37S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109 DCJK37S*-1U7N . . . . . . . . . . . . . . . . . . . . . 113 DCJK37S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113 DCJK37S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121 DCJKE37P*-1A0N . . . . . . . . . . . . . . . . . . . . 110 DCJKE37P*-1U0N . . . . . . . . . . . . . . . . . . . . 108 DCJKE37P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DCJKE37P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DCJKE37S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DCJKE37S*-1U0N . . . . . . . . . . . . . . . . . . . . 109 DCJKE37S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121 DCJKE37S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DCJKX37P*-1A0N . . . . . . . . . . . . . . . . . . . . 110 DCJKX37P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DCJKX37P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DCJKX37S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111 DCJKX37S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121 DCJKX37S*-OL4-146 . . . . . . . . . . . . . . . . . . 121 DCJT37P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DCJT37S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DCJTE37P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DCJTE37S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 DCJTX37P . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DCJTX37S* . . . . . . . . . . . . . . . . . . . . . . . . . 123 DCM-13W6P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DCM-13W6P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DCM-13W6P-NMB-76 . . . . . . . . . . . . . . . . . 195 DCM-13W6P-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-13W6P-NMC-76 . . . . . . . . . . . . . . . . . 195 DCM-13W6P-NMC-77 . . . . . . . . . . . . . . . . . 195 DCM-13W6P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DCM-13W6P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DCM-13W6S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DCM-13W6S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DCM-13W6S-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-13W6S-NMC-77 . . . . . . . . . . . . . . . . . 195 DCM-13W6S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DCM-13W6S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DCM-17W5P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DCM-17W5P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DCM-17W5P-NMB-76 . . . . . . . . . . . . . . . . . 195 DCM-17W5P-NMC-76 . . . . . . . . . . . . . . . . . 195 DCM-17W5P-NMC-77 . . . . . . . . . . . . . . . . . 195 DCM-17W5P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DCM-17W5P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DCM-17W5S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DCM-17W5S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DCM-17W5S-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-17W5S-NMC-76 . . . . . . . . . . . . . . . . . 195 DCM-17W5S-NMC-77 . . . . . . . . . . . . . . . . . 195 DCM-17W5S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DCM-17W5S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DCM-21W4P-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-21W4S-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-21WA4P-1A0N-K87. . . . . . . . . . . . . . . . 74 DCM-21WA4P-1A7N-K87. . . . . . . . . . . . . . . . 74 DCM-21WA4P-NMB-77 . . . . . . . . . . . . . . . . 195 DCM-21WA4P-NMC-76 . . . . . . . . . . . . . . . . 195 DCM-21WA4P-OL2-K87 . . . . . . . . . . . . . . . . 76 DCM-21WA4P-OL4-K87 . . . . . . . . . . . . . . . . 76 DCM-21WA4S-1A0N-A197 . . . . . . . . . . . . . . . 75 DCM-21WA4S-1A7N-A197 . . . . . . . . . . . . . . . 75 Part Number Page DCM-21WA4S-NMB-77 . . . . . . . . . . . . . . . . 195 DCM-21WA4S-OL2-A197 . . . . . . . . . . . . . . . . 77 DCM-21WA4S-OL4-A197 . . . . . . . . . . . . . . . . 77 DCM-25W36-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-25W3P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DCM-25W3P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DCM-25W3P-NMB-77 . . . . . . . . . . . . . . . . . 195 DCM-25W3P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DCM-25W3P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DCM-25W3S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DCM-25W3S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DCM-25W3S-NMC-76 . . . . . . . . . . . . . . . . . 195 DCM-25W3S-NMC-77 . . . . . . . . . . . . . . . . . 195 DCM-25W3S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DCM-25W3S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DCM-27W2P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DCM-27W2P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DCM-27W2P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DCM-27W2P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DCM-27W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DCM-27W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DCM-27W2S-NMC-76 . . . . . . . . . . . . . . . . . 195 DCM-27W2S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DCM-27W2S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DCM-37P-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DCM-37S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195 DCM-37S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195 DCM-37S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DCM-8W8P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DCM-8W8P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DCM-8W8P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DCM-8W8P-NMC-77 . . . . . . . . . . . . . . . . . . 195 DCM-8W8P-OL2-K87 . . . . . . . . . . . . . . . . . . 76 DCM-8W8P-OL4-K87 . . . . . . . . . . . . . . . . . . 76 DCM-8W8S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DCM-8W8S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DCM-8W8S-MNC-76 . . . . . . . . . . . . . . . . . . 195 DCM-8W8S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DCM-8W8S-NMC-77 . . . . . . . . . . . . . . . . . . 195 DCM-8W8S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DCM-8W8S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DCM13W6P1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6P1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6P1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6PF179ANMBK52 . . . . . . . . . . . . . 195 DCM13W6PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DCM13W6PNM . . . . . . . . . . . . . . . . . . . . . . 188 DCM13W6PNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM13W6POL3NMBK52 . . . . . . . . . . . . . . . 195 DCM13W6S1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6S1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6S1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM13W6SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCM13W6SF179ANMBK52 . . . . . . . . . . . . . 195 DCM13W6SNM . . . . . . . . . . . . . . . . . . . . . . 189 DCM13W6SNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM13W6SNMC76 . . . . . . . . . . . . . . . . . . . 195 DCM13W6SOL3NMBK52 . . . . . . . . . . . . . . . 195 DCM17W5P1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5P1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5P1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5PF179ANMBK52 . . . . . . . . . . . . . 195 DCM17W5PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DCM17W5PNM . . . . . . . . . . . . . . . . . . . . . . 188 DCM17W5PNMB77 . . . . . . . . . . . . . . . . . . . 195 DCM17W5PNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM17W5POL3NMBK52 . . . . . . . . . . . . . . . 195 DCM17W5S-NMB-76 . . . . . . . . . . . . . . . . . . 195 DCM17W5S1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5S1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5S1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM17W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCM17W5SF179ANMBK52 . . . . . . . . . . . . . 195 DCM17W5SNM . . . . . . . . . . . . . . . . . . . . . . 189 DCM17W5SNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM17W5SOL3NMBK52 . . . . . . . . . . . . . . . 195 DCM21W4S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DCM21WA4P-NMB-76 . . . . . . . . . . . . . . . . . 195 DCM21WA4P1A0NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4P1A7NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4P1A9NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4PF179ANMBK52 . . . . . . . . . . . . 195 DCM21WA4PK87 . . . . . . . . . . . . . . . . . . . . . . 78 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DC111808-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DC111808-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DC115339-23 . . . . . . . . . . . . . . . . . . . . . . . 205 DC115339-3 . . . . . . . . . . . . . . . . . . . . . . . . 207 DC115386-100A . . . . . . . . . . . . . . . . . . . . . . 195 DC115386-4B . . . . . . . . . . . . . . . . . . . . . . . 207 DC121073-152 . . . . . . . . . . . . . . . . . . . . . . . 200 DC121073-52 . . . . . . . . . . . . . . . . . . . . . . . 200 DC19678-138 . . . . . . . . . . . . . . . . . . . . 193, 195 DC19678-162 . . . . . . . . . . . . . . . . . . . . . . . . 195 DC19678-173 . . . . . . . . . . . . . . . . . . . . . . . . 195 DC19678-3 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DC19977-3 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DC19977-45 . . . . . . . . . . . . . . . . . . . . . 193, 195 DC20963 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DC20963-17 . . . . . . . . . . . . . . . . . . . . . . . . 192 DC22070 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DC22071 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 DC24660 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DC24660-16 . . . . . . . . . . . . . . . . . . . . . 192, 195 DC37P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . 10 DC37P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DC37P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DC37P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DC37P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DC37P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DC37P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DC37P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22 DC37P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DC37P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20 DC37P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DC37P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DC37P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DC37P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DC37P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12 DC37PK87. . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DC37S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11 DC37S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27 DC37S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27 DC37S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23 DC37S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23 DC37S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23 DC37S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25 DC37S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . 23 DC37S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . 25 DC37S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21 DC37S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27 DC37S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27 DC37S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25 DC37S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25 DC37S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13 DC37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DC50907-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DC51214 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DC51215 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DC51222-1. . . . . . . . . . . . . . . . . . . . . . . . . . 210 DC53750-3 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DCA21WA4PK87F0 . . . . . . . . . . . . . . . . . . . . 80 DCA21WA4SA197F0 . . . . . . . . . . . . . . . . . . . 81 DCA25W3PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DCA37PK87FO . . . . . . . . . . . . . . . . . . . . . . . 36 DCA37SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37 DCA8W8PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80 DCA8W8SA197F0 . . . . . . . . . . . . . . . . . . . . . 81 DCE37P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DCE37PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DCE37S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DCE37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DCJK37P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110 DCJK37P*-1A5N . . . . . . . . . . . . . . . . . . . . . 118 DCJK37P*-1A6N . . . . . . . . . . . . . . . . . . . . . 118 DCJK37P*-1A7N . . . . . . . . . . . . . . . . . . . . . 114 DCJK37P*-1A8N . . . . . . . . . . . . . . . . . . . . . 114 DCJK37P*-1A9N . . . . . . . . . . . . . . . . . . . . . 114 DCJK37P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116 DCJK37P*-1AFN. . . . . . . . . . . . . . . . . . . . . . 114 DCJK37P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116 DCJK37P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114 DCJK37P*-1AJN. . . . . . . . . . . . . . . . . . . . . . 116 DCJK37P*-1APN . . . . . . . . . . . . . . . . . . . . . 118 DCJK37P*-1ATN . . . . . . . . . . . . . . . . . . . . . 118 DCJK37P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118 DCJK37P*-1AVN . . . . . . . . . . . . . . . . . . . . . 116 Reader's Part Number Page DBMY21W1SNM . . . . . . . . . . . . . . . . . . . . . . 189 DBMY25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DBMY25PNM . . . . . . . . . . . . . . . . . . . . . . . . 180 DBMY25PNM*1AON. . . . . . . . . . . . . . . . . . . 176 DBMY25POL3NM . . . . . . . . . . . . . . . . . . . . . 172 DBMY25S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DBMY25SNM . . . . . . . . . . . . . . . . . . . . . . . . 181 DBMY25SNM*1AON. . . . . . . . . . . . . . . . . . . 177 DBMY25SOL3NM . . . . . . . . . . . . . . . . . . . . . 173 DBMY5W5PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DBMY5W5PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBMY5W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBMY5W5SNM . . . . . . . . . . . . . . . . . . . . . . 189 DBMY9W4PK87. . . . . . . . . . . . . . . . . . . . . . . 78 DBMY9W4PNM . . . . . . . . . . . . . . . . . . . . . . 188 DBMY9W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DBMY9W4SNM . . . . . . . . . . . . . . . . . . . . . . 189 DBMZ13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMZ13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMZ13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMZ13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMZ13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMZ13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMZ13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMZ13H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMZ17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMZ17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMZ17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DBMZ17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DBMZ17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMZ17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMZ17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMZ17H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMZ21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DBMZ21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DBMZ21C1SNA197. . . . . . . . . . . . . . . . . . . . . 53 DBMZ21C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMZ21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DBMZ21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DBMZ21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67 DBMZ21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMZ25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DBMZ25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DBMZ5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMZ5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMZ5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMZ5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMZ5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMZ5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMZ5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMZ5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBMZ9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DBMZ9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DBMZ9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DBMZ9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DBMZ9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DBMZ9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DBMZ9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DBMZ9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DBNG25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DBNG25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DBNGE25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DBNGE25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DBNGL25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DBNGL25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DBNGX25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DBNGX25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DBNGZ25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DBNGZ25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DBW25P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DBW25P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DBW25S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DBW25S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DBWE25P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DBWE25P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38 DBWE25S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DBWE25S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39 DBX25P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DBX25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DBX25S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DBX25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DC-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DC-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 Part Number Index 289 Reader's Resource D Subminiature 290 Part Number Page DCM21WA4PNM . . . . . . . . . . . . . . . . . . . . . 188 DCM21WA4PNMBK52 . . . . . . . . . . . . . . . . . 195 DCM21WA4POL3NMBK52 . . . . . . . . . . . . . . 195 DCM21WA4S-NMB-76 . . . . . . . . . . . . . . . . . 195 DCM21WA4S1A0NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4S1A7NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4S1A9NNMBK52 . . . . . . . . . . . . . 195 DCM21WA4SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCM21WA4SF179ANMBK52 . . . . . . . . . . . . 195 DCM21WA4SNM . . . . . . . . . . . . . . . . . . . . . 189 DCM21WA4SNMBK52 . . . . . . . . . . . . . . . . . 195 DCM21WA4SOL3NMBK52 . . . . . . . . . . . . . . 195 DCM25W3P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DCM25W3P1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3P1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3P1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3PF179ANMBK52 . . . . . . . . . . . . . 195 DCM25W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCM25W3PNM . . . . . . . . . . . . . . . . . . . . . . 188 DCM25W3PNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM25W3POL3NMBK52 . . . . . . . . . . . . . . . 195 DCM25W3S1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3S1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3S1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM25W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCM25W3SF179ANMBK52 . . . . . . . . . . . . . 195 DCM25W3SNM . . . . . . . . . . . . . . . . . . . . . . 189 DCM25W3SNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM25W3SOL3NMBK52 . . . . . . . . . . . . . . . 195 DCM27W2OL3NMBK52 . . . . . . . . . . . . . . . . 195 DCM27W2P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DCM27W2P1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2P1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2P1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2PF179ANMBK52 . . . . . . . . . . . . . 195 DCM27W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCM27W2PNM . . . . . . . . . . . . . . . . . . . . . . 188 DCM27W2PNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM27W2POL3NMBK52 . . . . . . . . . . . . . . . 195 DCM27W2S1A0NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2S1A7NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2S1A9NNMBK52 . . . . . . . . . . . . . . 195 DCM27W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCM27W2SF179ANMBK52 . . . . . . . . . . . . . 195 DCM27W2SNM . . . . . . . . . . . . . . . . . . . . . . 189 DCM27W2SNMBK52 . . . . . . . . . . . . . . . . . . 195 DCM37P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCM37P1A0NNMBK52 . . . . . . . . . . . . . . . . 195 DCM37P1A7NNMBK52 . . . . . . . . . . . . . . . . 195 DCM37P1A9NNMBK52 . . . . . . . . . . . . . . . . 195 DCM37PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM37PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM37PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138 DCM37PF179A . . . . . . . . . . . . . . . . . . . . . . . 138 DCM37PF179ANMBK52 . . . . . . . . . . . . . . . . 195 DCM37PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM37PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174 DCM37PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180 DCM37PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178 DCM37PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178 DCM37PNM*1AON . . . . . . . . . . . . . . . . . . . 176 DCM37PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195 DCM37PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DCM37PNMBK52. . . . . . . . . . . . . . . . . . . . . 195 DCM37PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195 DCM37POL3NM . . . . . . . . . . . . . . . . . . . . . . 172 DCM37POL3NMBK52 . . . . . . . . . . . . . . . . . 195 DCM37PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM37PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM37PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCM37PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCM37S. . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCM37S1A0NNMBK52 . . . . . . . . . . . . . . . . 195 Part Number Index Part Number Page DCM37S1A7NNMBK52 . . . . . . . . . . . . . . . . 195 DCM37S1A9NNMBK52 . . . . . . . . . . . . . . . . 195 DCM37SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM37SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCM37SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM37SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCM37SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139 DCM37SF179A . . . . . . . . . . . . . . . . . . . . . . . 139 DCM37SF179ANMBK52 . . . . . . . . . . . . . . . . 195 DCM37SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM37SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCM37SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175 DCM37SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM37SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181 DCM37SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179 DCM37SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179 DCM37SNM*1AON . . . . . . . . . . . . . . . . . . . 177 DCM37SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DCM37SNMBK52. . . . . . . . . . . . . . . . . . . . . 195 DCM37SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173 DCM37SOL3NMBK52 . . . . . . . . . . . . . . . . . 195 DCM37SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCM37SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCM37SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCM37SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM37SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCM50PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCM8W8PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DCM8W8PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DCM8W8PNMB76 . . . . . . . . . . . . . . . . . . . . 195 DCM8W8PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DCM8W8PNMC76 . . . . . . . . . . . . . . . . . . . . 195 DCM8W8SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DCM8W8SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DCM8W8SNMB76 . . . . . . . . . . . . . . . . . . . . 195 DCM8W8SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DCMA37PNM . . . . . . . . . . . . . . . . . . . . . . . . 182 DCMA37PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DCMA37SNM . . . . . . . . . . . . . . . . . . . . . . . . 183 DCMA37SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DCMA62PNM . . . . . . . . . . . . . . . . . . . . . . . . 184 DCMA62SNM . . . . . . . . . . . . . . . . . . . . . . . . 185 DCMAY37PNM . . . . . . . . . . . . . . . . . . . . . . . 182 DCMAY37SNM . . . . . . . . . . . . . . . . . . . . . . . 183 DCMAY62PNM . . . . . . . . . . . . . . . . . . . . . . . 184 DCMAY62SNM . . . . . . . . . . . . . . . . . . . . . . . 185 DCMB-17W5S-NMB-76 . . . . . . . . . . . . . . . . 195 DCMB-37S-NMB-77 . . . . . . . . . . . . . . . . . . . 195 DCMB-37S-NMC-77. . . . . . . . . . . . . . . . . . . 195 DCMB37S-NMB-76 . . . . . . . . . . . . . . . . . . . 195 DCMB37S-NMC-76 . . . . . . . . . . . . . . . . . . . 195 DCMC13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMC13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMC13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMC13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMC13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMC13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMC13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMC13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMC17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMC17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMC17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMC17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMC17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMC17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMC17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMC17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMC21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44 DCMC21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50 DCMC21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45 DCMC21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51 DCMC21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60 DCMC21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61 DCMC21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64 DCMC21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65 DCMC25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMC25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMC25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 Part Number Page DCMC25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMC25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMC25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMC25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMC25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMC27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMC27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMC27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMC27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMC27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMC27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMC27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMC27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMC37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DCMC37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DCMC8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DCMC8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DCMC8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DCMC8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DCMC8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DCMC8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMC8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DCMC8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DCMD13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMD13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMD13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMD13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMD13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMD13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMD13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMD13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMD17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMD17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMD17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMD17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMD17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMD17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMD17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMD17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMD21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44 DCMD21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50 DCMD21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45 DCMD21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51 DCMD21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60 DCMD21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61 DCMD21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64 DCMD21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65 DCMD25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMD25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMD25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMD25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMD25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMD25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMD25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMD25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMD27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMD27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMD27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMD27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMD27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMD27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMD27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMD27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMD37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DCMD37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DCMD8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DCMD8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DCMD8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DCMD8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DCMD8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DCMD8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMD8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DCMD8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DCME13W6PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCME13W6SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCME17W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCME17W5SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCME21WA4PK87 . . . . . . . . . . . . . . . . . . . . . 78 DCME21WA4SA197 . . . . . . . . . . . . . . . . . . . . 79 DCME25W3PK87. . . . . . . . . . . . . . . . . . . . . . 78 DCME25W3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCME27W2PK87. . . . . . . . . . . . . . . . . . . . . . 78 DCME27W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 Part Number Page DCME37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCME37S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCME8W8PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCME8W8SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCMG13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMG13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMG13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMG13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMG13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMG13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMG13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMG13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMG17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMG17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMG17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMG17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMG17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMG17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMG17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMG17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMG21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44 DCMG21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50 DCMG21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45 DCMG21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51 DCMG21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60 DCMG21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61 DCMG21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64 DCMG21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65 DCMG25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMG25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMG25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMG25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMG25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMG25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMG25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMG25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMG27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMG27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMG27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMG27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMG27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMG27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMG27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMG27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMG37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DCMG37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DCMG8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DCMG8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DCMG8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DCMG8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DCMG8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DCMG8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMG8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DCMG8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DCMM13W6P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMM13W6S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM17W5P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMM17W5S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM21WA4P . . . . . . . . . . . . . . . . . . . . . . 166 DCMM21WA4S . . . . . . . . . . . . . . . . . . . . . . 167 DCMM24W7S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM25W3P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMM25W3S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM27W2P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMM27W2S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM36W4S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCMM37PA . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCMM37PB . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37PC . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCMM37PD . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCMM37PE . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37PF . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCMM37PF179 . . . . . . . . . . . . . . . . . . . . . . 138 DCMM37PF179A . . . . . . . . . . . . . . . . . . . . . 138 DCMM37PG . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCMM37PH . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37PK . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCMM37PL . . . . . . . . . . . . . . . . . . . . . . . . . 132 DCMM37PM . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37PP . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCMM37PR . . . . . . . . . . . . . . . . . . . . . . . . . 134 DCMM37PS . . . . . . . . . . . . . . . . . . . . . . . . . 132 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DCMMP25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMP25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMP25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMP27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMP27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMP27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMP27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMP8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DCMMP8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DCMMP8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DCMMP8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DCMMV13C6PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMV13C6SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMV13H6PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMV13H6SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMV13V6PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMV13V6SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMV17C5PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMV17C5SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMV17H5PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMV17H5SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMV17V5PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMV17V5SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMV21CA4PN . . . . . . . . . . . . . . . . . . . . . 150 DCMMV21CA4SN . . . . . . . . . . . . . . . . . . . . . 151 DCMMV21HA4PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMV21HA4SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMV21VA4PN . . . . . . . . . . . . . . . . . . . . . 162 DCMMV21VA4SN . . . . . . . . . . . . . . . . . . . . . 163 DCMMV25C3PN. . . . . . . . . . . . . . . . . . . . . . 150 DCMMV25C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMV25H3PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMV25H3SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMV25V3PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMV25V3SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMV27C2PN. . . . . . . . . . . . . . . . . . . . . . 150 DCMMV27C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMV27H2PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMV27H2SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMV27V2PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMV27V2SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMV8C8PN. . . . . . . . . . . . . . . . . . . . . . . 150 DCMMV8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151 DCMMV8H8PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMV8H8SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMV8V8PN . . . . . . . . . . . . . . . . . . . . . . . 162 DCMMV8V8SN . . . . . . . . . . . . . . . . . . . . . . . 163 DCMMY13W6P . . . . . . . . . . . . . . . . . . . . . . 166 DCMMY13W6S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY17W5P . . . . . . . . . . . . . . . . . . . . . . 166 DCMMY17W5S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY21WA4P . . . . . . . . . . . . . . . . . . . . . 166 DCMMY21WA4S . . . . . . . . . . . . . . . . . . . . . 167 DCMMY24W7S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY25W3P . . . . . . . . . . . . . . . . . . . . . . 166 DCMMY25W3S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY27W2P . . . . . . . . . . . . . . . . . . . . . . 166 DCMMY27W2S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY36W4S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY37P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCMMY37S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCMMY43W2S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY47W1S . . . . . . . . . . . . . . . . . . . . . . 167 DCMMY8W8P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMMY8W8S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMMZ13C6PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ13C6SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ13H6PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ13H6SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ13V6PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ13V6SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMZ17C5PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ17C5SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ17H5PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ17H5SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ17V5PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ17V5SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMZ21CA4PN . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ21CA4SN . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ21HA4PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ21HA4SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ21VA4PN . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ21VA4SN . . . . . . . . . . . . . . . . . . . . . 163 Part Number Page DCMMZ25C3PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ25C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ25H3PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ25H3SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ25V3PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ25V3SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMZ27C2PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ27C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ27H2PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ27H2SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ27V2PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ27V2SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMZ8C8PN . . . . . . . . . . . . . . . . . . . . . . . 150 DCMMZ8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151 DCMMZ8H8PN . . . . . . . . . . . . . . . . . . . . . . . 158 DCMMZ8H8SN . . . . . . . . . . . . . . . . . . . . . . . 159 DCMMZ8V8PN . . . . . . . . . . . . . . . . . . . . . . . 162 DCMMZ8V8SN . . . . . . . . . . . . . . . . . . . . . . . 163 DCMN13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMN13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMN13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMN13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMN13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMN13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMN13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMN13H6SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMN17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMN17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMN17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMN17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMN17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMN17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMN17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMN17H5SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMN21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52 DCMN21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56 DCMN21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53 DCMN21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57 DCMN21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66 DCMN21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70 DCMN21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67 DCMN21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71 DCMN25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMN25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMN25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMN25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMN25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMN25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMN25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMN25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMN27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMN27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMN27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMN27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMN27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMN27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMN27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMN27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMN37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DCMN37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DCMN8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DCMN8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DCMN8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DCMN8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DCMN8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DCMN8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DCMN8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DCMN8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DCMP13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMP13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMP13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMP13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMP13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMP13H6SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMP13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMP13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMP17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMP17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMP17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMP17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMP17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMP17H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMP17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DCMME25W3S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME27W2P . . . . . . . . . . . . . . . . . . . . . . 166 DCMME27W2S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME36W4S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME37P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCMME37S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCMME43W2S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME47W1S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME8W8P . . . . . . . . . . . . . . . . . . . . . . . 166 DCMME8W8S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMMG13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMG13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMG13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMG13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMG17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMG17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMG17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMG17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMG21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146 DCMMG21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147 DCMMG21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154 DCMMG21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155 DCMMG25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMG25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMG25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMG25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMG27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMG27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMG27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMG27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMG8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DCMMG8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DCMMG8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DCMMG8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DCMMN13C6PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMN13C6SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMN13H6PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMN13H6SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMN13V6PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMN13V6SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMN17C5PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMN17C5SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMN17H5PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMN17H5SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMN17V5PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMN17V5SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMN21CA4PN. . . . . . . . . . . . . . . . . . . . . 150 DCMMN21CA4SN . . . . . . . . . . . . . . . . . . . . . 151 DCMMN21HA4PN . . . . . . . . . . . . . . . . . . . . 158 DCMMN21HA4SN . . . . . . . . . . . . . . . . . . . . 159 DCMMN21VA4PN . . . . . . . . . . . . . . . . . . . . . 162 DCMMN21VA4SN . . . . . . . . . . . . . . . . . . . . . 163 DCMMN25C3PN . . . . . . . . . . . . . . . . . . . . . 150 DCMMN25C3SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMN25H3PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMN25H3SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMN25V3PN . . . . . . . . . . . . . . . . . . . . . 162 DCMMN25V3SN . . . . . . . . . . . . . . . . . . . . . 163 DCMMN27C2PN . . . . . . . . . . . . . . . . . . . . . 150 DCMMN27C2SN . . . . . . . . . . . . . . . . . . . . . . 151 DCMMN27H2PN . . . . . . . . . . . . . . . . . . . . . 158 DCMMN27H2SN . . . . . . . . . . . . . . . . . . . . . 159 DCMMN27V2PN . . . . . . . . . . . . . . . . . . . . . 162 DCMMN27V2SN . . . . . . . . . . . . . . . . . . . . . 163 DCMMN8C8PN . . . . . . . . . . . . . . . . . . . . . . 150 DCMMN8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151 DCMMN8H8PN . . . . . . . . . . . . . . . . . . . . . . 158 DCMMN8H8SN . . . . . . . . . . . . . . . . . . . . . . 159 DCMMN8V8PN . . . . . . . . . . . . . . . . . . . . . . 162 DCMMN8V8SN . . . . . . . . . . . . . . . . . . . . . . 163 DCMMP13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMP13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMP13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMP13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMP17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMP17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMP17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMP17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMP21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146 DCMMP21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147 DCMMP21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154 DCMMP21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155 DCMMP25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 Reader's Part Number Page DCMM37PW . . . . . . . . . . . . . . . . . . . . . . . . 132 DCMM37PX . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136 DCMM37S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCMM37SA . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SB . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM37SC . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCMM37SD . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SE . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM37SF . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCMM37SF179 . . . . . . . . . . . . . . . . . . . . . . 139 DCMM37SF179A . . . . . . . . . . . . . . . . . . . . . 139 DCMM37SG . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SH . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM37SK . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCMM37SL . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SM . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM37SP . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCMM37SR . . . . . . . . . . . . . . . . . . . . . . . . . 135 DCMM37SS . . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SW . . . . . . . . . . . . . . . . . . . . . . . . 133 DCMM37SX . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM37SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137 DCMM43W2S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM47W1S . . . . . . . . . . . . . . . . . . . . . . . 167 DCMM8W8P . . . . . . . . . . . . . . . . . . . . . . . . 166 DCMM8W8S . . . . . . . . . . . . . . . . . . . . . . . . 167 DCMMC13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMC13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMC13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMC13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMC17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMC17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMC17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMC17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMC21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146 DCMMC21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147 DCMMC21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154 DCMMC21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155 DCMMC25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMC25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMC25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMC25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMC27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMC27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMC27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMC27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMC8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DCMMC8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DCMMC8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DCMMC8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DCMMD13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMD13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMD13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMD13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMD17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMD17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMD17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMD17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMD21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146 DCMMD21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147 DCMMD21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154 DCMMD21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155 DCMMD25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMD25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMD25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMD25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMD27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146 DCMMD27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147 DCMMD27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154 DCMMD27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155 DCMMD8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DCMMD8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DCMMD8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DCMMD8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DCMME13W6P. . . . . . . . . . . . . . . . . . . . . . . 166 DCMME13W6S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME17W5P. . . . . . . . . . . . . . . . . . . . . . . 166 DCMME17W5S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME21WA4P . . . . . . . . . . . . . . . . . . . . . 166 DCMME21WA4S . . . . . . . . . . . . . . . . . . . . . 167 DCMME24W7S . . . . . . . . . . . . . . . . . . . . . . 167 DCMME25W3P . . . . . . . . . . . . . . . . . . . . . . 166 Part Number Index 291 Reader's Resource D Subminiature 292 Part Number Page DCMP17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMP21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44 DCMP21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50 DCMP21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45 DCMP21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51 DCMP21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60 DCMP21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61 DCMP21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64 DCMP21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65 DCMP25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMP25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMP25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMP25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMP25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMP25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMP25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMP25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMP27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44 DCMP27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50 DCMP27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45 DCMP27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51 DCMP27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60 DCMP27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61 DCMP27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64 DCMP27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65 DCMP37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DCMP37SJA197. . . . . . . . . . . . . . . . . . . . . . . 17 DCMP8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DCMP8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DCMP8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DCMP8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DCMP8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DCMP8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61 DCMP8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DCMP8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DCMV13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMV13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMV13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMV13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMV13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMV13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMV13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMV13H6SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMV17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMV17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMV17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMV17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMV17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMV17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMV17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMV17H5SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMV21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52 DCMV21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56 DCMV21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53 DCMV21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57 DCMV21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66 DCMV21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70 DCMV21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67 DCMV21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71 DCMV25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMV25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMV25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMV25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMV25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMV25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMV25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMV25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMV27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMV27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMV27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMV27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMV27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMV27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMV27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMV27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMV37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DCMV37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DCMV8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DCMV8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DCMV8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DCMV8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DCMV8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DCMV8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 Part Number Index Part Number Page DCMV8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DCMV8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DCMY13W6PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCMY13W6PNM . . . . . . . . . . . . . . . . . . . . . 188 DCMY13W6SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCMY13W6SNM . . . . . . . . . . . . . . . . . . . . . 189 DCMY17W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCMY17W5PNM . . . . . . . . . . . . . . . . . . . . . 188 DCMY17W5SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCMY17W5SNM . . . . . . . . . . . . . . . . . . . . . 189 DCMY21WA4PK87 . . . . . . . . . . . . . . . . . . . . . 78 DCMY21WA4PNM . . . . . . . . . . . . . . . . . . . . 188 DCMY21WA4SA197 . . . . . . . . . . . . . . . . . . . . 79 DCMY21WA4SNM . . . . . . . . . . . . . . . . . . . . 189 DCMY25W3PK87 . . . . . . . . . . . . . . . . . . . . . 78 DCMY25W3PNM . . . . . . . . . . . . . . . . . . . . . 188 DCMY25W3SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCMY25W3SNM . . . . . . . . . . . . . . . . . . . . . 189 DCMY27W2PK87 . . . . . . . . . . . . . . . . . . . . . 78 DCMY27W2PNM . . . . . . . . . . . . . . . . . . . . . 188 DCMY27W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 DCMY27W2SNM . . . . . . . . . . . . . . . . . . . . . 189 DCMY37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DCMY37PNM . . . . . . . . . . . . . . . . . . . . . . . . 180 DCMY37PNM*1AON . . . . . . . . . . . . . . . . . . 176 DCMY37POL3NM . . . . . . . . . . . . . . . . . . . . . 172 DCMY37S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DCMY37SNM . . . . . . . . . . . . . . . . . . . . . . . . 181 DCMY37SNM*1AON . . . . . . . . . . . . . . . . . . 177 DCMY37SOL3NM . . . . . . . . . . . . . . . . . . . . . 173 DCMY8W8PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DCMY8W8PNM . . . . . . . . . . . . . . . . . . . . . . 188 DCMY8W8SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DCMY8W8SNM . . . . . . . . . . . . . . . . . . . . . . 189 DCMZ13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMZ13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMZ13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMZ13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMZ13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMZ13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMZ13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMZ13H6SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DCMZ17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMZ17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMZ17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMZ17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMZ17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMZ17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMZ17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMZ17H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DCMZ21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52 DCMZ21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56 DCMZ21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53 DCMZ21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57 DCMZ21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66 DCMZ21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70 DCMZ21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67 DCMZ21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71 DCMZ25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMZ25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMZ25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMZ25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMZ25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMZ25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMZ25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMZ25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMZ27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52 DCMZ27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56 DCMZ27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53 DCMZ27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57 DCMZ27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66 DCMZ27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70 DCMZ27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67 DCMZ27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71 DCMZ37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DCMZ37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DCMZ8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DCMZ8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DCMZ8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DCMZ8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DCMZ8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DCMZ8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DCMZ8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67 Part Number Page DCMZ8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DCNG37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DCNG37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DCNGE37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DCNGE37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DCNGL37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DCNGL37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DCNGX37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DCNGX37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DCNGZ37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DCNGZ37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DCW37P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DCW37P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DCW37S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DCW37S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DCWE37P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DCWE37P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38 DCWE37S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DCWE37S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39 DCX37P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DCX37PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DCX37S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DCX37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DD-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DD-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DD115339-24 . . . . . . . . . . . . . . . . . . . . . . . 205 DD115339-4 . . . . . . . . . . . . . . . . . . . . . . . . 207 DD115386-103A . . . . . . . . . . . . . . . . . . . . . . 195 DD121073-153 . . . . . . . . . . . . . . . . . . . . . . . 200 DD121073-53 . . . . . . . . . . . . . . . . . . . . . . . 200 DD19678-161 . . . . . . . . . . . . . . . . . . . . 193, 195 DD19678-172 . . . . . . . . . . . . . . . . . . . . . . . . 195 DD19678-176 . . . . . . . . . . . . . . . . . . . . . . . . 195 DD19678-4 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DD19977-4 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DD19977-44 . . . . . . . . . . . . . . . . . . . . . 193, 195 DD20964 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DD20964-19 . . . . . . . . . . . . . . . . . . . . . . . . 192 DD21961 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 DD21962 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DD24661 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DD24661-13 . . . . . . . . . . . . . . . . . . . . . 192, 195 DD50908-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DD50P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . 10 DD50P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DD50P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26 DD50P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DD50P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DD50P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22 DD50P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DD50P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22 DD50P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DD50P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20 DD50P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DD50P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26 DD50P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24 DD50P-1AWN-K87. . . . . . . . . . . . . . . . . . . . . 24 DD50P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12 DD50PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DD50S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11 DD50S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27 DD50S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27 DD50S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23 DD50S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23 DD50S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23 DD50S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25 DD50S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . 23 DD50S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . 25 DD50S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21 DD50S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27 DD50S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27 DD50S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25 DD50S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25 DD50S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13 DD50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DD51216 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DD51217 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DD51223-1. . . . . . . . . . . . . . . . . . . . . . . . . . 210 DD53750-4 . . . . . . . . . . . . . . . . . . . . . . . . . 218 DDA24W7PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DDA24W7SA197F0 . . . . . . . . . . . . . . . . . . . . 81 DDA36W4PK87F0 . . . . . . . . . . . . . . . . . . . . . 80 DDA36W4SA197F0 . . . . . . . . . . . . . . . . . . . . 81 Part Number Page DDE50P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DDE50PK87. . . . . . . . . . . . . . . . . . . . . . . . . . 32 DDE50S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DDE50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DDJK50P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DDJKE50P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DDJKE50P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DDJKX50P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120 DDJKX50P*-OL4-146 . . . . . . . . . . . . . . . . . . 120 DDM-24W7P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DDM-24W7P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DDM-24W7P-NMB-77 . . . . . . . . . . . . . . . . . 195 DDM-24W7P-NMC-76 . . . . . . . . . . . . . . . . . 195 DDM-24W7P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DDM-24W7P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DDM-24W7S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DDM-24W7S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DDM-24W7S-NMB-76 . . . . . . . . . . . . . . . . . 195 DDM-24W7S-NMC-76 . . . . . . . . . . . . . . . . . 195 DDM-24W7S-OL2-A197. . . . . . . . . . . . . . . . . 77 DDM-24W7S-OL4-A197. . . . . . . . . . . . . . . . . 77 DDM-36W4P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DDM-36W4P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DDM-36W4P-NMB-77 . . . . . . . . . . . . . . . . . 195 DDM-36W4P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DDM-36W4P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DDM-36W4S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DDM-36W4S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DDM-36W4S-NMB-77 . . . . . . . . . . . . . . . . . 195 DDM-36W4S-NMC-76 . . . . . . . . . . . . . . . . . 195 DDM-36W4S-OL2-A197. . . . . . . . . . . . . . . . . 77 DDM-36W4S-OL4-A197. . . . . . . . . . . . . . . . . 77 DDM-43W2P-1A0N-K87 . . . . . . . . . . . . . . . . 74 DDM-43W2P-1A7N-K87 . . . . . . . . . . . . . . . . 74 DDM-43W2P-OL2-K87 . . . . . . . . . . . . . . . . . 76 DDM-43W2P-OL4-K87 . . . . . . . . . . . . . . . . . 76 DDM-43W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DDM-43W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DDM-43W2S-NMB-77 . . . . . . . . . . . . . . . . . 195 DDM-43W2S-NMC-76 . . . . . . . . . . . . . . . . . 195 DDM-43W2S-OL2-A197. . . . . . . . . . . . . . . . . 77 DDM-43W2S-OL4-A197. . . . . . . . . . . . . . . . . 77 DDM-47W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74 DDM-47W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74 DDM-47W1P-OL2-K87. . . . . . . . . . . . . . . . . . 76 DDM-47W1P-OL4-K87. . . . . . . . . . . . . . . . . . 76 DDM-47W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75 DDM-47W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75 DDM-47W1S-NMC-76 . . . . . . . . . . . . . . . . . 195 DDM-47W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77 DDM-47W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77 DDM-50P-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DDM-50S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195 DDM-50S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DDM24W7P1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7P1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7P1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7PF179ANMBK52 . . . . . . . . . . . . . 195 DDM24W7PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DDM24W7PNM . . . . . . . . . . . . . . . . . . . . . . 188 DDM24W7PNMB76 . . . . . . . . . . . . . . . . . . . 195 DDM24W7PNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM24W7POL3NMBK52 . . . . . . . . . . . . . . . 195 DDM24W7S1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7S1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7S1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM24W7SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DDM24W7SF179ANMBK52 . . . . . . . . . . . . . 195 DDM24W7SNM . . . . . . . . . . . . . . . . . . . . . . 189 DDM24W7SNMB77 . . . . . . . . . . . . . . . . . . . 195 DDM24W7SNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM24W7SOL3NMBK52 . . . . . . . . . . . . . . . 195 DDM36W4P1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM36W4P1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM36W4P1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM36W4PF179ANMBK52 . . . . . . . . . . . . . 195 DDM36W4PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DDM36W4PNM . . . . . . . . . . . . . . . . . . . . . . 188 DDM36W4PNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM36W4POL3NMBK52 . . . . . . . . . . . . . . . 195 DDM36W4S1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM36W4S1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM36W4S1A9NNMBK52 . . . . . . . . . . . . . . 195 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DDME47W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDME50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDME50S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDMG24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMG24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMG24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMG24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMG36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMG36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMG36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMG36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMG43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMG43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMG43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMG43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMG47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMG47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMG47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMG47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMG50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DDMG50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DDMM24W7P . . . . . . . . . . . . . . . . . . . . . . . 166 DDMM36W4P . . . . . . . . . . . . . . . . . . . . . . . 166 DDMM43W2P . . . . . . . . . . . . . . . . . . . . . . . 166 DDMM47W1P . . . . . . . . . . . . . . . . . . . . . . . 166 DDMM50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDMM50PA . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PB . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50PC . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDMM50PD . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PE . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50PF . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDMM50PF179 . . . . . . . . . . . . . . . . . . . . . . 138 DDMM50PF179A . . . . . . . . . . . . . . . . . . . . . 138 DDMM50PG . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PH . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50PK . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDMM50PL . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PM . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50PP . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDMM50PR . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDMM50PS . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PW . . . . . . . . . . . . . . . . . . . . . . . . 132 DDMM50PX . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDMM50S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDMM50SA . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SB . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMM50SC . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDMM50SD . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SE . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMM50SF . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDMM50SF179 . . . . . . . . . . . . . . . . . . . . . . 139 DDMM50SF179A . . . . . . . . . . . . . . . . . . . . . 139 DDMM50SG . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SH . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMM50SK . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDMM50SL . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SM . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMM50SP . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDMM50SR . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDMM50SS . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SW . . . . . . . . . . . . . . . . . . . . . . . . 133 DDMM50SX . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMM50SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMMC24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMC24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMC24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMC24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMC36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMC36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMC36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMC36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMC43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMC43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMC43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMC43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMC47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMC47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMC47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMC47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMD24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMD24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149 Part Number Page DDMMD24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMD24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMD36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMD36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMD36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMD36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMD43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMD43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMD43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMD43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMD47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMD47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMD47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMD47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMME24W7P . . . . . . . . . . . . . . . . . . . . . . 166 DDMME36W4P . . . . . . . . . . . . . . . . . . . . . . 166 DDMME43W2P . . . . . . . . . . . . . . . . . . . . . . 166 DDMME47W1P . . . . . . . . . . . . . . . . . . . . . . 166 DDMME50P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDMME50S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDMMG24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMG24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMG24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMG24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMG36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMG36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMG36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMG36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMG43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMG43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMG43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMG43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMG47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMG47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMG47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMG47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMN24C7PN . . . . . . . . . . . . . . . . . . . . . 152 DDMMN24C7SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMN24H7PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMN24H7SN. . . . . . . . . . . . . . . . . . . . . . 161 DDMMN24V7PN . . . . . . . . . . . . . . . . . . . . . 164 DDMMN24V7SN . . . . . . . . . . . . . . . . . . . . . 165 DDMMN36C4PN . . . . . . . . . . . . . . . . . . . . . 152 DDMMN36C4SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMN36H4PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMN36H4SN. . . . . . . . . . . . . . . . . . . . . . 161 DDMMN36V4PN . . . . . . . . . . . . . . . . . . . . . 164 DDMMN36V4SN . . . . . . . . . . . . . . . . . . . . . 165 DDMMN43C2PN . . . . . . . . . . . . . . . . . . . . . 152 DDMMN43C2SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMN43H2PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMN43H2SN. . . . . . . . . . . . . . . . . . . . . . 161 DDMMN43V2PN . . . . . . . . . . . . . . . . . . . . . 164 DDMMN43V2SN . . . . . . . . . . . . . . . . . . . . . 165 DDMMN47C1PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMN47C1SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMN47H1PN. . . . . . . . . . . . . . . . . . . . . . 160 DDMMN47H1SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMN47V1PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMN47V1SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMP24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMP24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMP24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMP24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMP36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMP36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMP36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMP36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMP43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMP43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMP43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMP43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMP47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148 DDMMP47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149 DDMMP47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156 DDMMP47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157 DDMMV24C7PN . . . . . . . . . . . . . . . . . . . . . 152 DDMMV24C7SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMV24H7PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMV24H7SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMV24V7PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMV24V7SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMV36C4PN . . . . . . . . . . . . . . . . . . . . . 152 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DDM50SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDM50SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139 DDM50SF179A. . . . . . . . . . . . . . . . . . . . . . . 139 DDM50SF179ANMBK52 . . . . . . . . . . . . . . . . 195 DDM50SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDM50SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDM50SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175 DDM50SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDM50SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181 DDM50SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179 DDM50SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179 DDM50SNM*1AON . . . . . . . . . . . . . . . . . . . 177 DDM50SNMB76 . . . . . . . . . . . . . . . . . . . . . . 195 DDM50SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DDM50SNMBK52 . . . . . . . . . . . . . . . . . . . . 195 DDM50SOL3NM. . . . . . . . . . . . . . . . . . . . . . 173 DDM50SOL3NMBK52 . . . . . . . . . . . . . . . . . 195 DDM50SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDM50SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDM50SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDM50SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDMA50PNM . . . . . . . . . . . . . . . . . . . . . . . . 182 DDMA50PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DDMA50SNM . . . . . . . . . . . . . . . . . . . . . . . . 183 DDMA50SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DDMA78PNM . . . . . . . . . . . . . . . . . . . . . . . . 184 DDMA78SNM . . . . . . . . . . . . . . . . . . . . . . . . 185 DDMAY50PNM . . . . . . . . . . . . . . . . . . . . . . . 182 DDMAY50SNM . . . . . . . . . . . . . . . . . . . . . . . 183 DDMAY78PNM . . . . . . . . . . . . . . . . . . . . . . . 184 DDMAY78SNM . . . . . . . . . . . . . . . . . . . . . . . 185 DDMB-247S-NMB-76. . . . . . . . . . . . . . . . . . 195 DDMB-50S-NMB-77. . . . . . . . . . . . . . . . . . . 195 DDMB-50S-NMC-77 . . . . . . . . . . . . . . . . . . 195 DDMB50S-NMB-76 . . . . . . . . . . . . . . . . . . . 195 DDMB50S-NMC-76 . . . . . . . . . . . . . . . . . . . 195 DDMC24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMC24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMC24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMC24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMC36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMC36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMC36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMC36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMC43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMC43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMC43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMC43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMC47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMC47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMC47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMC47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMC50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DDMC50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DDMD24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMD24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMD24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMD24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMD36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMD36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMD36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMD36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMD43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMD43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMD43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMD43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMD47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMD47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMD47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMD47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMD50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DDMD50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DDME24W7PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDME24W7SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDME36W4PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDME36W4SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDME43W2PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDME43W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDME47W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 Reader's Part Number Page DDM36W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DDM36W4SF179ANMBK52 . . . . . . . . . . . . . 195 DDM36W4SNM . . . . . . . . . . . . . . . . . . . . . . 189 DDM36W4SNMB76 . . . . . . . . . . . . . . . . . . . 195 DDM36W4SNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM36W4SOL3NMBK52 . . . . . . . . . . . . . . . 195 DDM43W2P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DDM43W2P1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2P1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2P1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2PF179ANMBK52 . . . . . . . . . . . . . 195 DDM43W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DDM43W2PNM . . . . . . . . . . . . . . . . . . . . . . 188 DDM43W2PNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM43W2POL3NMBK52 . . . . . . . . . . . . . . . 195 DDM43W2S1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2S1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2S1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM43W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DDM43W2SF179ANMBK52 . . . . . . . . . . . . . 195 DDM43W2SNM . . . . . . . . . . . . . . . . . . . . . . 189 DDM43W2SNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM43W2SOL3NMBK52 . . . . . . . . . . . . . . . 195 DDM47W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DDM47W1P1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1P1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1P1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1PF179ANMBK52 . . . . . . . . . . . . . 195 DDM47W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DDM47W1PNM . . . . . . . . . . . . . . . . . . . . . . 188 DDM47W1PNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM47W1POL3NMBK52 . . . . . . . . . . . . . . . 195 DDM47W1S1A0NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1S1A7NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1S1A9NNMBK52 . . . . . . . . . . . . . . 195 DDM47W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DDM47W1SF179ANMBK52 . . . . . . . . . . . . . 195 DDM47W1SNM . . . . . . . . . . . . . . . . . . . . . . 189 DDM47W1SNMBK52 . . . . . . . . . . . . . . . . . . 195 DDM47W1SOL3NMBK52 . . . . . . . . . . . . . . . 195 DDM50P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDM50P1A0NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50P1A7NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50P1A9NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDM50PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138 DDM50PF179A . . . . . . . . . . . . . . . . . . . . . . . 138 DDM50PF179ANMBK52 . . . . . . . . . . . . . . . . 195 DDM50PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDM50PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174 DDM50PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180 DDM50PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178 DDM50PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178 DDM50PNM*1AON . . . . . . . . . . . . . . . . . . . 176 DDM50PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195 DDM50PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DDM50PNMBK52. . . . . . . . . . . . . . . . . . . . . 195 DDM50PNMC76. . . . . . . . . . . . . . . . . . . . . . 195 DDM50POL3NM . . . . . . . . . . . . . . . . . . . . . . 172 DDM50POL3NMBK52 . . . . . . . . . . . . . . . . . 195 DDM50PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDM50PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DDM50PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DDM50PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DDM50S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDM50S1A0NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50S1A7NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50S1A9NNMBK52 . . . . . . . . . . . . . . . . 195 DDM50SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DDM50SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DDM50SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DDM50SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Part Number Index 293 Reader's Resource D Subminiature 294 Part Number Page DDMMV36C4SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMV36H4PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMV36H4SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMV36V4PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMV36V4SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMV43C2PN . . . . . . . . . . . . . . . . . . . . . 152 DDMMV43C2SN . . . . . . . . . . . . . . . . . . . . . 153 DDMMV43H2PN . . . . . . . . . . . . . . . . . . . . . 160 DDMMV43H2SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMV43V2PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMV43V2SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMV47C1PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMV47C1SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMV47H1PN . . . . . . . . . . . . . . . . . . . . . . 160 DDMMV47H1SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMV47V1PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMV47V1SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMY24W7P . . . . . . . . . . . . . . . . . . . . . . 166 DDMMY36W4P . . . . . . . . . . . . . . . . . . . . . . 166 DDMMY43W2P . . . . . . . . . . . . . . . . . . . . . . 166 DDMMY47W1P . . . . . . . . . . . . . . . . . . . . . . 166 DDMMY50P . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDMMY50S . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDMMZ24C7PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMZ24C7SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMZ24H7PN . . . . . . . . . . . . . . . . . . . . . . 160 DDMMZ24H7SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMZ24V7PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMZ24V7SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMZ36C4PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMZ36C4SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMZ36H4PN . . . . . . . . . . . . . . . . . . . . . . 160 DDMMZ36H4SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMZ36V4PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMZ36V4SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMZ43C2PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMZ43C2SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMZ43H2PN . . . . . . . . . . . . . . . . . . . . . . 160 DDMMZ43H2SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMZ43V2PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMZ43V2SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMMZ47C1PN . . . . . . . . . . . . . . . . . . . . . . 152 DDMMZ47C1SN . . . . . . . . . . . . . . . . . . . . . . 153 DDMMZ47H1PN . . . . . . . . . . . . . . . . . . . . . . 160 DDMMZ47H1SN . . . . . . . . . . . . . . . . . . . . . . 161 DDMMZ47V1PN . . . . . . . . . . . . . . . . . . . . . . 164 DDMMZ47V1SN . . . . . . . . . . . . . . . . . . . . . . 165 DDMN24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMN24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMN24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMN24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMN24H7PNK87. . . . . . . . . . . . . . . . . . . . . 68 DDMN24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMN24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMN24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMN36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMN36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMN36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMN36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMN36H4PNK87. . . . . . . . . . . . . . . . . . . . . 68 DDMN36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMN36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMN36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMN43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMN43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMN43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMN43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMN43H2PNK87. . . . . . . . . . . . . . . . . . . . . 68 DDMN43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMN43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMN43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMN47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMN47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMN47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMN47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMN47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMN47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMN47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMN47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMN50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DDMN50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DDMP24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMP24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47 Part Number Index Part Number Page DDMP24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMP24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMP36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMP36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMP36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMP36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMP43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMP43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMP43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMP43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMP47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46 DDMP47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47 DDMP47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62 DDMP47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63 DDMP50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DDMP50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17 DDMV24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMV24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMV24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMV24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMV24H7PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMV24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMV24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMV24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMV36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMV36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMV36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMV36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMV36H4PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMV36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMV36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMV36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMV43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMV43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMV43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMV43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMV43H2PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMV43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMV43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMV43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMV47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMV47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMV47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMV47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMV47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMV47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMV47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMV47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMV50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DDMV50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DDMY24W7PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDMY24W7PNM . . . . . . . . . . . . . . . . . . . . . 188 DDMY24W7SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDMY24W7SNM . . . . . . . . . . . . . . . . . . . . . 189 DDMY36W4PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDMY36W4PNM . . . . . . . . . . . . . . . . . . . . . 188 DDMY36W4SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDMY36W4SNM . . . . . . . . . . . . . . . . . . . . . 189 DDMY43W2PK87 . . . . . . . . . . . . . . . . . . . . . 78 DDMY43W2PNM . . . . . . . . . . . . . . . . . . . . . 188 DDMY43W2SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDMY43W2SNM . . . . . . . . . . . . . . . . . . . . . 189 DDMY47W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78 DDMY47W1PNM . . . . . . . . . . . . . . . . . . . . . 188 DDMY47W1SA197 . . . . . . . . . . . . . . . . . . . . . 79 DDMY47W1SNM . . . . . . . . . . . . . . . . . . . . . 189 DDMY50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DDMY50PNM . . . . . . . . . . . . . . . . . . . . . . . . 180 DDMY50PNM*1AON . . . . . . . . . . . . . . . . . . 176 DDMY50POL3NM. . . . . . . . . . . . . . . . . . . . . 172 DDMY50S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DDMY50SNM . . . . . . . . . . . . . . . . . . . . . . . . 181 DDMY50SNM*1AON . . . . . . . . . . . . . . . . . . 177 DDMY50SOL3NM. . . . . . . . . . . . . . . . . . . . . 173 DDMZ24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMZ24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMZ24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMZ24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMZ24H7PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMZ24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMZ24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMZ24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMZ36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54 Part Number Page DDMZ36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMZ36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMZ36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMZ36H4PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMZ36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMZ36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMZ36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMZ43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMZ43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMZ43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMZ43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMZ43H2PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMZ43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMZ43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMZ43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMZ47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54 DDMZ47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58 DDMZ47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55 DDMZ47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59 DDMZ47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68 DDMZ47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72 DDMZ47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69 DDMZ47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73 DDMZ50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6 DDMZ50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7 DDNG50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DDNG50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DDNGE50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DDNGE50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DDNGL50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DDNGL50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DDNGX50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DDNGX50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DDNGZ50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4 DDNGZ50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5 DDX50P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10 DDX50PK87. . . . . . . . . . . . . . . . . . . . . . . . . . 32 DDX50S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11 DDX50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33 DE-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DE-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218 DE111805-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DE111805-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DE111813 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 DE111813-3 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DE111919 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 DE111920 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 DE115339 . . . . . . . . . . . . . . . . . . . . . . . . . . 207 DE115339-20 . . . . . . . . . . . . . . . . . . . . . . . . 205 DE115386-101A . . . . . . . . . . . . . . . . . . . . . . 195 DE115386-1B . . . . . . . . . . . . . . . . . . . . . . . . 207 DE121073-154 . . . . . . . . . . . . . . . . . . . . . . . 200 DE121073-54 . . . . . . . . . . . . . . . . . . . . . . . . 200 DE19977-47 . . . . . . . . . . . . . . . . . . . . . 193, 195 DE19977-5 . . . . . . . . . . . . . . . . . . . . . . . . . 204 DE24657 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DE24657-16 . . . . . . . . . . . . . . . . . . . . . 192, 195 DE44994 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 DE44994-2 . . . . . . . . . . . . . . . . . . . . . . . . . 192 DE50904-1. . . . . . . . . . . . . . . . . . . . . . . . . . 218 DE51218 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DE51219 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 DE51224-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210 DE53750 . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 DE9P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . . . 10 DE9P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . . 26 DE9P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . . 26 DE9P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . . 22 DE9P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . . 22 DE9P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . . 22 DE9P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . . 24 DE9P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . . 22 DE9P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . . 24 DE9P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . . 20 DE9P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . . 26 DE9P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . . 26 DE9P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . . 24 DE9P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . . 24 DE9P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . . 12 DE9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DE9S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . . 11 DE9S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . . 27 DE9S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . . 27 Part Number Page DE9S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DE9S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DE9S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . . 23 DE9S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . . 25 DE9S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . . . 23 DE9S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . . . 25 DE9S-1AON-A197. . . . . . . . . . . . . . . . . . . . . . 21 DE9S-1ATN-A197. . . . . . . . . . . . . . . . . . . . . . 27 DE9S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . . 27 DE9S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . . 25 DE9S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . . 25 DE9S-F179A-A197 . . . . . . . . . . . . . . . . . . . . . 13 DE9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DEA9PK87FO. . . . . . . . . . . . . . . . . . . . . . . . . 36 DEA9SA197FO . . . . . . . . . . . . . . . . . . . . . . . . 37 DEBS-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 DEBU111515 . . . . . . . . . . . . . . . . . . . . . . . . . 216 DEE9P-0L2-K87-146 . . . . . . . . . . . . . . . . . . . 10 DEE9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DEE9S-0L2-A197-146 . . . . . . . . . . . . . . . . . . . 11 DEE9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DEJK9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . . 110 DEJK9P*-1A5N. . . . . . . . . . . . . . . . . . . . . . . 118 DEJK9P*-1A6N. . . . . . . . . . . . . . . . . . . . . . . 118 DEJK9P*-1A7N. . . . . . . . . . . . . . . . . . . . . . . 114 DEJK9P*-1A8N. . . . . . . . . . . . . . . . . . . . . . . 114 DEJK9P*-1A9N. . . . . . . . . . . . . . . . . . . . . . . 114 DEJK9P*-1ADN . . . . . . . . . . . . . . . . . . . . . . 116 DEJK9P*-1AFN . . . . . . . . . . . . . . . . . . . . . . . 114 DEJK9P*-1AGN . . . . . . . . . . . . . . . . . . . . . . 116 DEJK9P*-1AHN . . . . . . . . . . . . . . . . . . . . . . 114 DEJK9P*-1AJN . . . . . . . . . . . . . . . . . . . . . . . 116 DEJK9P*-1APN . . . . . . . . . . . . . . . . . . . . . . 118 DEJK9P*-1ATN. . . . . . . . . . . . . . . . . . . . . . . 118 DEJK9P*-1AUN . . . . . . . . . . . . . . . . . . . . . . 118 DEJK9P*-1AVN . . . . . . . . . . . . . . . . . . . . . . 116 DEJK9P*-1AWN . . . . . . . . . . . . . . . . . . . . . . 116 DEJK9P*-1U0N . . . . . . . . . . . . . . . . . . . . . . 108 DEJK9P*-1U7N . . . . . . . . . . . . . . . . . . . . . . 112 DEJK9P*-1U7N-146 . . . . . . . . . . . . . . . . . . . 112 DEJK9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . . 120 DEJK9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . . 111 DEJK9S*-1A5N. . . . . . . . . . . . . . . . . . . . . . . 119 DEJK9S*-1A6N. . . . . . . . . . . . . . . . . . . . . . . 119 DEJK9S*-1A7N. . . . . . . . . . . . . . . . . . . . . . . 115 DEJK9S*-1A8N. . . . . . . . . . . . . . . . . . . . . . . 115 DEJK9S*-1A9N. . . . . . . . . . . . . . . . . . . . . . . 115 DEJK9S*-1ADN . . . . . . . . . . . . . . . . . . . . . . 117 DEJK9S*-1AFN . . . . . . . . . . . . . . . . . . . . . . . 115 DEJK9S*-1AGN . . . . . . . . . . . . . . . . . . . . . . 117 DEJK9S*-1AHN . . . . . . . . . . . . . . . . . . . . . . 115 DEJK9S*-1AJN . . . . . . . . . . . . . . . . . . . . . . . 117 DEJK9S*-1APN . . . . . . . . . . . . . . . . . . . . . . 119 DEJK9S*-1ATN. . . . . . . . . . . . . . . . . . . . . . . 119 DEJK9S*-1AUN . . . . . . . . . . . . . . . . . . . . . . 119 DEJK9S*-1AVN . . . . . . . . . . . . . . . . . . . . . . 117 DEJK9S*-1AWN . . . . . . . . . . . . . . . . . . . . . . 117 DEJK9S*-1U0N . . . . . . . . . . . . . . . . . . . . . . 109 DEJK9S*-1U7N . . . . . . . . . . . . . . . . . . . . . . 113 DEJK9S*-1U7N-146 . . . . . . . . . . . . . . . . . . . 113 DEJK9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . . 121 DEJKE9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . 110 DEJKE9P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108 DEJKE9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DEJKE9P*-OL4-146 . . . . . . . . . . . . . . . . . . . 120 DEJKE9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111 DEJKE9S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109 DEJKE9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121 DEJKE9S*-OL4-146 . . . . . . . . . . . . . . . . . . . 121 DEJKX9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . 110 DEJKX9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120 DEJKX9P*-OL4-146 . . . . . . . . . . . . . . . . . . . 120 DEJKX9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111 DEJKX9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121 DEJKX9S*-OL4-146 . . . . . . . . . . . . . . . . . . . 121 DEJT9P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DEJT9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DEJTE9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DEJTE9S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DEJTX9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DEJTX9S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123 DEM-5W1P-1A0N-K87 . . . . . . . . . . . . . . . . . . 74 DEM-5W1P-1A7N-K87 . . . . . . . . . . . . . . . . . . 74 Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature Part Number Page DEMM5W1P . . . . . . . . . . . . . . . . . . . . . . . . . 166 DEMM5W1S . . . . . . . . . . . . . . . . . . . . . . . . . 167 DEMM9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEMM9PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEMM9PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEMM9PF179 . . . . . . . . . . . . . . . . . . . . . . . 138 DEMM9PF179A . . . . . . . . . . . . . . . . . . . . . . 138 DEMM9PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEMM9PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PM. . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEMM9PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEMM9PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PW . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEMM9PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEMM9S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEMM9SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMM9SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEMM9SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMM9SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEMM9SF179 . . . . . . . . . . . . . . . . . . . . . . . 139 DEMM9SF179A . . . . . . . . . . . . . . . . . . . . . . 139 DEMM9SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMM9SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEMM9SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SM. . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMM9SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEMM9SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEMM9SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SW . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEMM9SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMM9SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMMC5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DEMMC5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DEMMC5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DEMMC5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DEMMD5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DEMMD5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DEMMD5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DEMMD5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DEMME5W1P . . . . . . . . . . . . . . . . . . . . . . . . 166 DEMME5W1S . . . . . . . . . . . . . . . . . . . . . . . . 167 DEMME9P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEMME9S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEMMG5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DEMMG5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DEMMG5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DEMMG5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DEMMN5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150 DEMMN5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151 DEMMN5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158 DEMMN5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159 DEMMN5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162 DEMMN5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163 DEMMP5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146 DEMMP5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147 DEMMP5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154 DEMMP5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155 DEMMV5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150 DEMMV5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151 DEMMV5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158 DEMMV5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159 DEMMV5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162 DEMMV5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163 DEMMY5W1P . . . . . . . . . . . . . . . . . . . . . . . . 166 DEMMY5W1S . . . . . . . . . . . . . . . . . . . . . . . . 167 DEMMY9P . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEMMY9S . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEMMZ5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150 DEMMZ5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151 DEMMZ5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158 DEMMZ5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159 DEMMZ5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162 Part Number Page DEMMZ5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163 DEMN5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DEMN5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DEMN5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DEMN5C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DEMN5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DEMN5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DEMN5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DEMN5H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71 DEMN9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6 DEMN9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7 DEMP5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DEMP5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DEMP5C1SJA197 . . . . . . . . . . . . . . . . . . . . . . 45 DEMP5C1SVA197. . . . . . . . . . . . . . . . . . . . . . 51 DEMP5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DEMP5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61 DEMP5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DEMP5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DEMP9PJK87. . . . . . . . . . . . . . . . . . . . . . . . . 16 DEMP9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17 DEMPPNMB77 . . . . . . . . . . . . . . . . . . . . . . . 195 DEMV5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DEMV5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DEMV5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DEMV5C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57 DEMV5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DEMV5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DEMV5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DEMV5H1SYA197 . . . . . . . . . . . . . . . . . . . . . . 71 DEMV9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6 DEMV9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7 DEMY5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DEMY5W1PNM . . . . . . . . . . . . . . . . . . . . . . 188 DEMY5W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DEMY5W1SNM . . . . . . . . . . . . . . . . . . . . . . 189 DEMY9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEMY9PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180 DEMY9PNM*1AON . . . . . . . . . . . . . . . . . . . . 176 DEMY9POL3NM . . . . . . . . . . . . . . . . . . . . . . 172 DEMY9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEMY9SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181 DEMY9SNM*1AON . . . . . . . . . . . . . . . . . . . . 177 DEMY9SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173 DEMZ5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52 DEMZ5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56 DEMZ5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53 DEMZ5C1SYA197 . . . . . . . . . . . . . . . . . . . . . . 57 DEMZ5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66 DEMZ5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70 DEMZ5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67 DEMZ5H1SYA197 . . . . . . . . . . . . . . . . . . . . . . 71 DEMZ9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6 DEMZ9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7 DENG9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DENG9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DENGE9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DENGE9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DENGL9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DENGL9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DENGX9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DENGX9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DENGZ9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DENGZ9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DEW9P* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DEW9P*G . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DEW9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DEW9S*G . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DEWE9P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DEWE9P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DEWE9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DEWE9S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39 DEX9P-0L2-K87-146 . . . . . . . . . . . . . . . . . . . 10 DEX9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DEX9S-0L2-A197-146 . . . . . . . . . . . . . . . . . . . 11 DEX9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DM115224-1010A . . . . . . . . . . . . . . . . . 191, 195 DM115224-1020A . . . . . . . . . . . . . . . . . 191, 195 DM115224-1040A . . . . . . . . . . . . . . . . . 191, 195 DM115224-2010A . . . . . . . . . . . . . . . . . 191, 195 DM115224-2020A . . . . . . . . . . . . . . . . . 191, 195 DM115224-2040A . . . . . . . . . . . . . . . . . 191, 195 DM115224-3010 . . . . . . . . . . . . . . . . . . 191, 195 Dimensions are shown in mm (inch) Dimensions subject to change Resource Part Number Page DEM9SNM . . . . . . . . . . . . . . . . . . . . . . . . . . 181 DEM9SNM*1A7N . . . . . . . . . . . . . . . . . . . . . 179 DEM9SNM*1A9N . . . . . . . . . . . . . . . . . . . . . 179 DEM9SNM*1AON . . . . . . . . . . . . . . . . . . . . . 177 DEM9SNMB77 . . . . . . . . . . . . . . . . . . . . . . . 195 DEM9SNMBK52 . . . . . . . . . . . . . . . . . . . . . . 195 DEM9SNMC76 . . . . . . . . . . . . . . . . . . . . . . . 195 DEM9SOL3NM . . . . . . . . . . . . . . . . . . . . . . . 173 DEM9SOL3NMBK52 . . . . . . . . . . . . . . . . . . . 195 DEM9SP . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEM9SR . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEM9SS . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SW . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SX . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEM9SZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEMA15PNM . . . . . . . . . . . . . . . . . . . . . . . . 184 DEMA15PNMBK47FO . . . . . . . . . . . . . . . . . . 195 DEMA15SNM . . . . . . . . . . . . . . . . . . . . . . . . 185 DEMA15SNMBK47FO . . . . . . . . . . . . . . . . . . 195 DEMA25PNMBK47FO . . . . . . . . . . . . . . . . . . 195 DEMA25SNMBK47FO. . . . . . . . . . . . . . . . . . 195 DEMA37PNMBK47FO . . . . . . . . . . . . . . . . . . 195 DEMA37SNMBK47FO. . . . . . . . . . . . . . . . . . 195 DEMA50PNMBK47FO . . . . . . . . . . . . . . . . . . 195 DEMA50SNMBK47FO. . . . . . . . . . . . . . . . . . 195 DEMA9PNM . . . . . . . . . . . . . . . . . . . . . . . . . 182 DEMA9PNMBK47FO . . . . . . . . . . . . . . . . . . . 195 DEMA9PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DEMA9SNM . . . . . . . . . . . . . . . . . . . . . . . . . 183 DEMA9SNMBK47FO. . . . . . . . . . . . . . . . . . . 195 DEMA9SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195 DEMAK15PNMBK47FO . . . . . . . . . . . . . . . . . 195 DEMAK15SNMBK47FO . . . . . . . . . . . . . . . . . 195 DEMAK25PNMBK47FO . . . . . . . . . . . . . . . . 195 DEMAK25SNMBK47FO . . . . . . . . . . . . . . . . 195 DEMAK37PNMBK47FO . . . . . . . . . . . . . . . . 195 DEMAK37SNMBK47FO . . . . . . . . . . . . . . . . 195 DEMAK50PNMBK47FO . . . . . . . . . . . . . . . . 195 DEMAK9PNMBK47FO . . . . . . . . . . . . . . . . . 195 DEMAK9SNMBK47FO . . . . . . . . . . . . . . . . . 195 DEMAY15PNM . . . . . . . . . . . . . . . . . . . . . . . 184 DEMAY15SNM . . . . . . . . . . . . . . . . . . . . . . . 185 DEMAY9PNM . . . . . . . . . . . . . . . . . . . . . . . . 182 DEMAY9SNM . . . . . . . . . . . . . . . . . . . . . . . . 183 DEMB-5W1S-NMB-76 . . . . . . . . . . . . . . . . . 195 DEMB-9S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195 DEMB9S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195 DEMB9S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195 DEMB9SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195 DEMC5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DEMC5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DEMC5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DEMC5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DEMC5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DEMC5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61 DEMC5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DEMC5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DEMC9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17 DEMCP9PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16 DEMD5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DEMD5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DEMD5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DEMD5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DEMD5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DEMD5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61 DEMD5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DEMD5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DEMD9PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16 DEMD9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17 DEME5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78 DEME5W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79 DEME9P. . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEME9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEMG5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44 DEMG5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50 DEMG5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45 DEMG5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51 DEMG5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60 DEMG5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61 DEMG5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64 DEMG5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65 DEMG9PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16 DEMG9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17 Reader's Part Number Page DEM-5W1P-NMB-76 . . . . . . . . . . . . . . . . . . 195 DEM-5W1P-NMB-77 . . . . . . . . . . . . . . . . . . 195 DEM-5W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195 DEM-5W1P-OL2-K87 . . . . . . . . . . . . . . . . . . . 76 DEM-5W1P-OL4-K87 . . . . . . . . . . . . . . . . . . . 76 DEM-5W1S-1A0N-A197 . . . . . . . . . . . . . . . . . 75 DEM-5W1S-1A7N-A197 . . . . . . . . . . . . . . . . . 75 DEM-5W1S-NMB-77 . . . . . . . . . . . . . . . . . . 195 DEM-5W1S-NMC-76 . . . . . . . . . . . . . . . . . . 195 DEM-5W1S-OL2-A197 . . . . . . . . . . . . . . . . . . 77 DEM-5W1S-OL4-A197 . . . . . . . . . . . . . . . . . . 77 DEM-9P-NMB-76 . . . . . . . . . . . . . . . . . . . . . 195 DEM-9S-NMB-76 . . . . . . . . . . . . . . . . . . . . . 195 DEM-9S-NMC-77 . . . . . . . . . . . . . . . . . . . . . 195 DEM5W1P1A0NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1P1A7NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1P1A9NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1PF179ANMBK52 . . . . . . . . . . . . . . . 195 DEM5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . . 78 DEM5W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188 DEM5W1PNMBK52 . . . . . . . . . . . . . . . . . . . 195 DEM5W1POL3NMBK52 . . . . . . . . . . . . . . . . 195 DEM5W1S1A0NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1S1A7NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1S1A9NNMBK52 . . . . . . . . . . . . . . . 195 DEM5W1SA197 . . . . . . . . . . . . . . . . . . . . . . . 79 DEM5W1SF179ANMBK52 . . . . . . . . . . . . . . . 195 DEM5W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189 DEM5W1SNMBK52 . . . . . . . . . . . . . . . . . . . 195 DEM5W1SOL3NMBK52 . . . . . . . . . . . . . . . . 195 DEM9P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 DEM9P1A0NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9P1A7NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9P1A9NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9PA . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PB . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9PC . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEM9PD . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9PF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEM9PF179 . . . . . . . . . . . . . . . . . . . . . . . . . 138 DEM9PF179A . . . . . . . . . . . . . . . . . . . . . . . . 138 DEM9PF179ANMBK52 . . . . . . . . . . . . . . . . . 195 DEM9PG . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PH . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9PK . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEM9PL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PLNM . . . . . . . . . . . . . . . . . . . . . . . . . 174 DEM9PM . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9PNM . . . . . . . . . . . . . . . . . . . . . . . . . . 180 DEM9PNM*1A7N . . . . . . . . . . . . . . . . . . . . . 178 DEM9PNM*1A9N . . . . . . . . . . . . . . . . . . . . . 178 DEM9PNM*1AON . . . . . . . . . . . . . . . . . . . . . 176 DEM9PNMBK52 . . . . . . . . . . . . . . . . . . . . . . 195 DEM9PNMC76 . . . . . . . . . . . . . . . . . . . . . . . 195 DEM9PNMC77 . . . . . . . . . . . . . . . . . . . . . . . 195 DEM9POL3NM . . . . . . . . . . . . . . . . . . . . . . . 172 DEM9POL3NMBK52 . . . . . . . . . . . . . . . . . . . 195 DEM9PP . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEM9PR . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 DEM9PS . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PW . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 DEM9PX . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9PZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 DEM9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 DEM9S1A0NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9S1A7NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9S1A9NNMBK52 . . . . . . . . . . . . . . . . . . 195 DEM9SA . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SB . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEM9SC . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEM9SD . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SE . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEM9SF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEM9SF179 . . . . . . . . . . . . . . . . . . . . . . . . . 139 DEM9SF179A . . . . . . . . . . . . . . . . . . . . . . . . 139 DEM9SF179ANMBK52 . . . . . . . . . . . . . . . . . 195 DEM9SG . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SH . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 DEM9SK . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 DEM9SL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 DEM9SLNM . . . . . . . . . . . . . . . . . . . . . . . . . 175 DEM9SM . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Part Number Index 295 Part Number Page DM115224-3010A . . . . . . . . . . . . . . . . . . . . . 191 DM115224-3020 . . . . . . . . . . . . . . . . . . 191, 195 DM115224-3020A . . . . . . . . . . . . . . . . . . . . 191 DM115224-3040 . . . . . . . . . . . . . . . . . . 191, 195 DM115224-3040A . . . . . . . . . . . . . . . . . . . . 191 DM115224-4010 . . . . . . . . . . . . . . . . . . 191, 195 DM115224-4010A . . . . . . . . . . . . . . . . . . . . . 191 DM115224-4020 . . . . . . . . . . . . . . . . . . 191, 195 DM115224-4020A . . . . . . . . . . . . . . . . . . . . 191 DM115224-4040 . . . . . . . . . . . . . . . . . . 191, 195 DM115224-4040A . . . . . . . . . . . . . . . . . . . . 191 DM115740-12 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115740-13 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115740-19 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115740-5036 . . . . . . . . . . . . . . . . . . . . . 195 DM115740-5046 . . . . . . . . . . . . . . . . . . . . . 195 DM115740-5047 . . . . . . . . . . . . . . . . . . . . . 195 DM115741-5032 . . . . . . . . . . . . . . . . . . . . . 195 DM115741-5048 . . . . . . . . . . . . . . . . . . . . . 195 DM115741-7 . . . . . . . . . . . . . . . . . . . . . . . . 195 DM115741-8 . . . . . . . . . . . . . . . . . . . . . . . . 195 DM115742-13 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115742-14 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115742-15 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115742-5028 . . . . . . . . . . . . . . . . . . . . . 195 DM115742-5039 . . . . . . . . . . . . . . . . . . . . . 195 DM115742-5075 . . . . . . . . . . . . . . . . . . . . . 195 DM115743-20 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115743-22 . . . . . . . . . . . . . . . . . . . . . . . 195 DM115743-5040 . . . . . . . . . . . . . . . . . . . . . 195 DM115743-5064 . . . . . . . . . . . . . . . . . . . . . 195 DM130321-3 . . . . . . . . . . . . . . . . . . . . . . . . . 92 DM130338. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130338-1 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM130338-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130339. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130339-1 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM130339-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130340. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130340-1 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM130340-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130341 . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130341-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130341-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130342. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130342-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130342-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130343. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130343-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130343-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM130346-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92 DM130352-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92 DM130358-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92 DM13041-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 191 DM13042-1 . . . . . . . . . . . . . . . . . . . . . . . . . 191 DM13043-1 . . . . . . . . . . . . . . . . . . . . . . . . . 191 DM51155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 DM51155-12 . . . . . . . . . . . . . . . . . . . . . . . . . 94 DM51155-13 . . . . . . . . . . . . . . . . . . . . . . . . . 94 DM51155-5000 . . . . . . . . . . . . . . . . . . . . . . . 91 DM51155-5004 . . . . . . . . . . . . . . . . . . . . . . . 91 DM51155-5005 . . . . . . . . . . . . . . . . . . . . . . 195 DM51155-7 . . . . . . . . . . . . . . . . . . . . . . 91, 195 DM51157 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 DM51157-13 . . . . . . . . . . . . . . . . . . . . . . . . . 94 DM51157-14 . . . . . . . . . . . . . . . . . . . . . . . . . 94 Part Number Index Part Number Page DM51157-5000 . . . . . . . . . . . . . . . . . . . . . . . 91 DM51157-5005. . . . . . . . . . . . . . . . . . . . 91, 195 DM51157-8 . . . . . . . . . . . . . . . . . . . . . . 91, 195 DM53740 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-15 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53740-16 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53740-17 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53740-18 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53740-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-35 . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-36 . . . . . . . . . . . . . . . . . . . . . . . . 190 DM53740-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5000 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5001 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5002 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5005 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5008 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5099 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5100 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5101 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5104 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5105 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5145 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53740-5147 . . . . . . . . . . . . . . . . . . . . . . 190 DM53741. . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-10 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53741-11 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53741-12 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53741-13 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53741-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5000 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5001 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5003 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5004 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5059 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5060 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5062 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53741-5063 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53742 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-16 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53742-17 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53742-18 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53742-19 . . . . . . . . . . . . . . . . . . . . . 86, 195 DM53742-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-36 . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-37 . . . . . . . . . . . . . . . . . . . . . . . . 190 DM53742-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5000 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5001 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5002 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5004 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5006 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5085 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5086 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5089 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5091 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5092 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5126 . . . . . . . . . . . . . . . . . . . . . . . 86 DM53742-5127 . . . . . . . . . . . . . . . . . . . . . . 190 DM53743-16 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53743-17 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53743-18 . . . . . . . . . . . . . . . . . . . . . 87, 195 Part Number Page DM53743-19 . . . . . . . . . . . . . . . . . . . . . 87, 195 DM53743-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5000 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5001 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5003 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5004 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5073 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5074 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5076 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-5077 . . . . . . . . . . . . . . . . . . . . . . . 87 DM53743-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 87 DM53744-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM53744-107 . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53744-21 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53744-24 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53744-25 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53744-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM53744-62 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53744-63 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53744-64 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53744-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM53744-92 . . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53744-95 . . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53745-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM53745-104 . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53745-107 . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53745-120 . . . . . . . . . . . . . . . . . . . . . . . . 93 DM53745-126 . . . . . . . . . . . . . . . . . . . . . . . . 95 DM53745-25 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53745-27 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53745-28 . . . . . . . . . . . . . . . . . . . . . 90, 191 DM53745-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 DM53745-70 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53745-72 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53745-77 . . . . . . . . . . . . . . . . . . . . . . . . 191 DM53745-8 . . . . . . . . . . . . . . . . . . . . . . . . . . 90 M24308/26-1 . . . . . . . . . . . . . . . . . . . . . . . 209 M24308/26-2 . . . . . . . . . . . . . . . . . . . . . . . 209 M85049/48-1-1 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-1-2 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-1-3 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-1-4 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-1-5 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-2-1 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-2-2 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-2-3 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-2-4 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-2-5 . . . . . . . . . . . . . . . . . . . . . . 203 M85049/48-3-2 . . . . . . . . . . . . . . . . . . . . . . 204 M85049/48-3-3 . . . . . . . . . . . . . . . . . . . . . . 204 M85049/48-3-4 . . . . . . . . . . . . . . . . . . . . . . 204 M85049/48-3-5 . . . . . . . . . . . . . . . . . . . . . . 204 M85049/50-1 . . . . . . . . . . . . . . . . . . . . . . . 204 M85049/50-2 . . . . . . . . . . . . . . . . . . . . . . . 204 M85049/50-3 . . . . . . . . . . . . . . . . . . . . . . . 204 M85049/50-4 . . . . . . . . . . . . . . . . . . . . . . . 204 M85049/50-5 . . . . . . . . . . . . . . . . . . . . . . . 204 MDSM-15PE-Z10-VR22 . . . . . . . . . . . . . . . . . 99 MDSM-15SC-Z11-VS1. . . . . . . . . . . . . . . . . . 100 MDSM-18PE-Z10-VR25 . . . . . . . . . . . . . . . . . 99 MDSM-25PE-Z10-VR17 . . . . . . . . . . . . . . . . . 99 MDSM-25SC-Z11-VS1 . . . . . . . . . . . . . . . . . 100 MDSM-30PE-Z10-VR22 . . . . . . . . . . . . . . . . . 99 MDSM-9PE-Z10-VR25 . . . . . . . . . . . . . . . . . . 99 Part Number Page MDSM-9SC-Z11-VS1 . . . . . . . . . . . . . . . . . . 100 ZDA15P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 28 ZDA15P-A191. . . . . . . . . . . . . . . . . . . . . . . . . 34 ZDA15P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ZDA15S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 29 ZDA15S-A191. . . . . . . . . . . . . . . . . . . . . . . . . 35 ZDA15S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ZDAE15P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 8 ZDAE15S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 9 ZDAL15P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28 ZDAL15S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29 ZDB25P-1AKN-146. . . . . . . . . . . . . . . . . . . . . 28 ZDB25P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34 ZDB25P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ZDB25S-1AKN-146. . . . . . . . . . . . . . . . . . . . . 29 ZDB25S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35 ZDB25S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ZDBE25P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 8 ZDBE25S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 9 ZDBL25P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28 ZDBL25S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29 ZDC37P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28 ZDC37P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34 ZDC37P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ZDC37S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29 ZDC37S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35 ZDC37S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ZDCE37P-OL2-146. . . . . . . . . . . . . . . . . . . . . . 8 ZDCE37S-OL2-146. . . . . . . . . . . . . . . . . . . . . . 9 ZDCL37P-1AKN-146. . . . . . . . . . . . . . . . . . . . 28 ZDCL37S-1AKN-146. . . . . . . . . . . . . . . . . . . . 29 ZDD50P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34 ZDD50P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ZDD50S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35 ZDD50S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ZDDE50P-OL2-146 . . . . . . . . . . . . . . . . . . . . . 8 ZDDE50S-OL2-146 . . . . . . . . . . . . . . . . . . . . . 9 ZDE9P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . . 28 ZDE9P-A191. . . . . . . . . . . . . . . . . . . . . . . . . . 34 ZDE9P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ZDE9S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . . 29 ZDE9S-A191. . . . . . . . . . . . . . . . . . . . . . . . . . 35 ZDE9S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ZDEE9P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . . 8 ZDEE9S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . . 9 ZDEL9P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 28 ZDEL9S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 29 ZEDA15PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDA15SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDAL15PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDAL15SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDB25PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDB25SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDBL25PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDBL25SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDC37PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDC37SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDCL37PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDCL37SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDE9PBA . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDE9SBA . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ZEDEL9PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ZEDEL9SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Reader's Resource D Subminiature 296 Dimensions are shown in mm (inch) Dimensions subject to change Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1 MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 4 DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5 APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. (iii) Other important information ITT Cannon continuously endeavours to improve their products. Therefore, ITT Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. Dimensions are shown in mm (inch) Dimensions subject to change Resource ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon's prior consent must be obtained in all cases. Reader's 2 FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3 HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 297 297 W E ' R E I N P A R T O F I N T E R C O N N E C T Y O U R W O R L D T E C H N O L O G Y We are focused on your world with Innovation, Experience, Reliability & Responsiveness. Don't blink. T oday, we serve nearly every industry in which the increased demand for reliable and innovative interconnect No industry in the world moves faster than electronics. Take a snapshot of it today, and it all systems is critical: Computers (Personal computers, I portables and peripherals) I N N O V A T I O N Telecommunications (Network systems and services/LAN; mobile) changes by tomorrow. A commitment to concurrent engineering Transportation (Automobiles, heavy- helps you reach your markets faster duty vehicles, rail and mass transit) When you need to bring your products to market more quickly, you most likely seek a partner who moves just as fast as you do. A company at the forefront with the Military/Aerospace (Commercial and Let us bring our spirit of innovation to military aircraft, defense and space) your world. Experienced engineering Industrial (Factory automation and teams located throughout the globe work instrumentation) hand-in-hand with our customers. And since these teams are thoroughly Medical (Diagnostic equipment) Broadcasting hour-a-day concurrent engineering Consumer Products capability. These teams advance your networked together, you benefit from 24 project from initial product concepts to latest in products and service. A t ITT Cannon, we have made it our business to understand your world. Or should we say, the many parts of your world: As ITT Cannon begins our ninth decade final design and into production. in business, we are proud to provide our Our teams are experts in computer- global and regional customers with the based design, modeling and analysis to most reliable electronic products and assure robust product designs. We are services available: also well-versed in performance Interconnects and cable assemblies simulation, as well as verification of RF connectors mechanical and electrical properties. Switches and conductive rubber switchpads The places in the world where you do ITT Cannon utilizes Pro/ENGINEER* software which allows us to develop products and manufacturing processes business. Test accessories concurrently, and to easily evaluate The products you bring to the world. I/O card, memory card and smart multiple design alternatives. This means The service you require from card interconnects better designed products, produced suppliers to compete in the world. (copper and fiber optic) At ITT Cannon, we are proud of a heritage that helped pioneer the electronics industry from its infancy in the early part of this century, to the highly advanced technologies of the present. Local area network components Turn-key network systems and services Customer use tooling faster and at a lower cost. ITT Cannon's Integrated Product Development process (IPD) allows us to minimize cycle time for first article and volume production. *A trademark of Parametric Technology Corp. E X P E I I R I V ITT Cannon has also met or exceeded E N C E the quality system requirements from all A N I N T O Y O U V I T A T I O N customers who have conducted audits. Worldwide capacity to meet all of your delivery requirements We participate in ship-to-stock programs with many of these customers worldwide S H R W A R E O R L D and have received numerous quality and Our decades of manufacturing preferred supplier awards from experience, help us bring the latest Innovation. Experience. Reliability. customers throughout the world in each products to your world. With automated Responsiveness. of the industries we serve. manufacturing capacity strategically At ITT Cannon, these are the strengths located in North America, Europe and that we bring to our customers each and Asia, we can produce products in either large or small quantities to quickly meet your exact requirements. ITT Cannon is able to modify existing products to suit special customer requirements. With global I V every day. Just as we have for nearly nine decades. We pride ourselves on a level of R E S P O N S I V E N E S S service and manufacturing know-how that has enabled us to lead our industry. A singular focus on responding to your Exceeding your expectations -- not just needs meeting them -- is how we approach every project. manufacturing capacity in every We know that to be responsive, we must continent, we are also able to source know your world inside and out: your With the world moving faster all the product from the location that best suits particular company, your industry and time, ITT Cannon is a partner who can your needs. This means we have the your challenges. Each of ITT Cannon's help you get your products to market not flexibility to select the most thousands of employees worldwide is just on time, but ahead of the advantageous shipping methods and focused on responding to you with competition. other logistical options. timely and dependable information -- At ITT Cannon, we realize that each and on ensuring that we keep the customer we serve has their own special commitments we make. For instance, our needs and expectations. That is why we globally linked computer system tracks would welcome the opportunity to the status of your order anywhere in the discuss your project, your company, your world. industry -- yes, your world. ITT Cannon has established Centers of Excellence for world class capabilities such as: Machining, stamping, surface plating, molding, cable assembly and network systems technology -- all utilizing the most advanced CAM You also benefit from our field equipment. applications and sales network, which provides industry-specific knowledge to help you design in the best product for R E L I I I A B your application. I I L I T Y Our distribution network is one of the most extensive in the industry, and can We don't stop at ``world class quality'' -- Continuous improvement is our standard Our goal is to bring world class electronics to your world. This commitment to perfection has helped ITT Cannon's global facilities earn ISO 9000 certification. We have invested in world class process controls for both assembly and component manufacturing. provide you off-the-shelf product to meet the most challenging delivery requirements.