NUP5120X6 5-Line Transient Voltage Suppressor Array This 5-line voltage transient suppressor array is designed for application requiring transient voltage protection capability. It is intended for use in over-transient voltage and ESD sensitive equipment such as cell phones, portables, computers, printers and other applications. This device features a monolithic common anode design which protects five independent lines in a single SOT-563 package. http://onsemi.com SOT-563 5-LINE TRANSIENT VOLTAGE SUPPRESSOR Features * Protects up to 5 Lines in a Single SOT-563 Package * ESD Rating of Class 3B (Exceeding 8 kV) per Human Body Model * * PIN ASSIGNMENT and Class C (Exceeding 400 V) per Machine Model. Compliance with IEC 61000-4-2 (ESD) 15 kV (Air), 8 kV (Contact) This is a Pb-Free Device 1 6 2 5 3 4 Applications * Hand Held Portable Applications * Serial and Parallel Ports * Notebooks, Desktops, Servers PIN 1. 2. 3. 4. 5. 6. CATHODE ANODE CATHODE CATHODE CATHODE CATHODE MAXIMUM RATINGS (TJ = 25C, unless otherwise specified) Symbol PPK 1 Rating Peak Power Dissipation 8x20 msec double exponential waveform, (Note 1) Value Unit 90 W MARKING DIAGRAM 6 TJ Operating Junction Temperature Range -40 to 125 C TSTG Storage Temperature Range -55 to 150 C TL Lead Solder Temperature - Maximum (10 seconds) 260 C ESD Human Body Model (HBM) Machine Model (MM) IEC 61000-4-2 Air (ESD) IEC 61000-4-2 Contact (ESD) 16000 400 15000 8000 V 54 3 12 SOT-563 CASE 463A STYLE 6 RN MG G RN = Specific Device Code M = Month Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Non-repetitive current pulse per Figure 1. Device Package Shipping NUP5120X6T1G SOT-563 (Pb-Free) 4000/Tape & Reel NUP5120X6T2G SOT-563 (Pb-Free) 4000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2006 December, 2006 - Rev. 4 1 Publication Order Number: NUP5120/D NUP5120X6 ELECTRICAL CHARACTERISTICS (TJ = 25C, unless otherwise specified) Parameter Conditions Reverse Working Voltage (Note 2) Breakdown Voltage IT = 1 mA, (Note 3) Reverse Leakage Current Capacitance Symbol Min VRWM Typ Max Unit - 5.0 V VBR 6.2 6.8 7.2 V VRWM = 3 V IR - 0.01 0.5 mA VR = 0 V, f = 1 MHz (Line to GND) VR = 2.5 V, f = 1 MHz (Line to GND) CJ - 54 70 pF 2. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC or continuous peak operating voltage level. 3. VBR is measured at pulse test current IT. http://onsemi.com 2 NUP5120X6 120 1000 PEAK POWER (W) % OF RATED POWER OR IPP TA = 25 C 100 80 60 40 100 20 0 0 25 50 75 100 125 10 150 Figure 1. Power Derating vs. Ambient Temperature Figure 2. Peak Power vs. Pulse Duration 60 CT, TYPICAL CAPACITANCE (pF) IPP, PEAK CURRENT (A) TA = 25 C 10 1 6 8 10 12 14 TA = 25 C 50 40 30 20 10 0 16 0 1 3 4 5 VR, REVERSE VOLTAGE (V) Figure 3. Peak Current vs. Clamp Voltage Figure 4. Typical Capacitance vs. Reverse Voltage 6 1 TA = 25 C FORWARD CURRENT (A) TA = 25 C REVERSE CURRENT (nA) 2 VCL, CLAMP VOLTAGE (V) 1000 100 TJ = 125 C 10 TJ = 25 C 1 0.1 0.01 100 10 PULSE DURATION (S) 100 0.1 1 TA, AMBIENT TEMPERATURE (C) 1 2 3 4 5 TJ = 125 C 0.1 TJ = 25 C 0.01 0.001 0.6 6 0.7 0.8 0.9 1.0 1.1 1.2 REVERSE VOLTAGE (V) FORWARD VOLTAGE (V) Figure 5. Reverse Current vs. Reverse Voltage Figure 6. Typical Forward Current vs. Forward Voltage http://onsemi.com 3 NUP5120X6 PACKAGE DIMENSIONS SOT-563, 6 LEAD CASE 463A-01 ISSUE B A -X- 6 5 1 G 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. C K 4 3 B -Y- DIM A B C D G J K S S D 65 PL 0.08 (0.003) J M X Y MILLIMETERS MIN MAX 1.50 1.70 1.10 1.30 0.50 0.60 0.17 0.27 0.50 BSC 0.08 0.18 0.10 0.30 1.50 1.70 INCHES MIN MAX 0.059 0.067 0.043 0.051 0.020 0.024 0.007 0.011 0.020 BSC 0.003 0.007 0.004 0.012 0.059 0.067 STYLE 6: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. CATHODE 5. CATHODE 6. CATHODE SOLDERING FOOTPRINT 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NUP5120/D