Features n Surface mount packaging for automated n n n n assembly Small footprint size (1210) and low profile for space-constrained mobile applications Ultra-low resistance RoHS compliant* and halogen free** Agency recognition: Applications n Thermal protection for Li-ion and polymer battery packs n Game consoles n PC motherboards n USB port protection - USB 2.0, 3.0 & OTG n Mobile phones n Digital cameras MF-USML Series - Low Ohmic PTC Resettable Fuses Electrical Characteristics Model MF-USML175 MF-USML190 MF-USML200 MF-USML230 MF-USML250 MF-USML270 MF-USML300 MF-USML350 MF-USML380 MF-USML400 MF-USML450 MF-USML500 MF-USML600 MF-USML650 MF-USML700 V max. Volts I max. Amps 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Ihold Itrip Amperes at 23 C Hold Trip 1.75 3.50 1.90 4.90 2.00 4.00 2.30 4.60 2.50 5.00 2.70 5.40 3.00 6.00 3.50 7.00 3.80 8.00 4.00 8.00 4.50 9.00 5.00 10.00 6.00 12.00 6.50 13.00 7.00 14.00 Resistance Ohms at 23 C RMin. R1Max. 0.0060 0.0400 0.0060 0.0300 0.0050 0.0300 0.0045 0.0240 0.0045 0.0220 0.0040 0.0200 0.0040 0.0180 0.0030 0.0180 0.0020 0.0160 0.0015 0.0155 0.0010 0.0150 0.0010 0.0145 0.0010 0.0140 0.0010 0.0140 0.0010 0.0135 Max. Time To Trip Amperes at 23 C Seconds at 23 C 8.00 9.50 8.00 8.00 8.00 8.00 8.00 17.50 19.00 20.00 22.50 25.00 30.00 32.50 35.00 2.50 3.00 3.00 3.50 3.50 4.00 4.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 Tripped Power Dissipation Watts at 23 C Typ. 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Environmental Characteristics Operating Temperature.......................................... -40 C to +85 C Storage Condition Before Opening................................................. +40 C max. / 70 % RH max. After Opening.................................................... +40 C max. / 10 % RH max. Floor Condition After Opening............................... Consumption within 4 weeks at floor condition +30 C max. / 60 % RH max. Passive Aging........................................................ +85 C, 1000 hours................................................ 10 % typical resistance change Humidity Aging...................................................... +85 C, 85 % R.H. 100 hours................................ 15 % typical resistance change Thermal Shock...................................................... +85 C to -40 C, 20 times..................................... 30 % typical resistance change Solvent Resistance................................................ MIL-STD-202, Method 215.................................... No change Vibration................................................................ MIL-STD-883C, Method 2007.1,............................ No change Condition A Moisture Sensitivity Level (MSL)........................... See Note ESD Classification - HBM...................................... Class 6 Test Procedures And Requirements Test Test Conditions Accept/Reject Criteria Visual/Mech........................................................... Verify dimensions and materials............................ Per MF physical description Resistance............................................................. In still air @ 23 C.................................................. Rmin R R1max Time to Trip............................................................ At specified current, Vmax, 23 C.......................... T max. time to trip (seconds) Hold Current.......................................................... 30 min. at Ihold...................................................... No trip Trip Cycle Life........................................................ Vmax, Imax, 100 cycles......................................... No arcing or burning Trip Endurance...................................................... Vmax, 48 hours...................................................... No arcing or burning Solderability........................................................... 245 C 5 C, 5 seconds..................................... 95 % min. coverage UL File Number..................................................... E174545 TUV Certificate Number........................................ R 50302873 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-USML Series - Low Ohmic PTC Resettable Fuses Product Dimensions Model MF-USML175 MF-USML190 MF-USML200 MF-USML230 MF-USML250 MF-USML270 MF-USML300 MF-USML350 MF-USML380 MF-USML400 MF-USML450 MF-USML500 MF-USML600 MF-USML650 MF-USML700 DIMENSIONS: A Min. Max. Min. 3.00 (0.118) 3.43 (0.135) 3.00 (0.118) 3.43 (0.135) B Max. D Min. Min. 0.30 (0.012) 0.60 (0.024) 0.25 (0.010) 0.05 (0.002) 0.45 (0.018) 0.60 (0.024) 1.20 (0.047) 0.25 (0.010) 0.05 (0.002) 0.45 (0.018) Max. Min. 2.35 (0.093) 2.80 (0.110) 2.35 (0.093) 2.80 (0.110) C E Max. MM (INCHES) Side View Top View A Bottom View C D Recommended Pad Layout E 1.0 0.05 (.039 .002) 1.0 0.05 (.039 .002) Terminal material: ENIG-plated terminals B 2.5 0.1 (.098 .004) 2.0 0.1 (.079 .004) Packaging Specifications MF-USML175~MF-USML400 = 5000 pcs. per reel MF-USML450~MF-USML700 = 3500 pcs. per reel Thermal Derating Table - Ihold (Amps) Model MF-USML175 MF-USML190 MF-USML200 MF-USML230 MF-USML250 MF-USML270 MF-USML300 MF-USML350 MF-USML380 MF-USML400 MF-USML450 MF-USML500 MF-USML600 MF-USML650 MF-USML700 -40 C 2.57 2.80 2.94 3.40 3.70 3.98 4.41 5.10 5.59 5.80 6.30 7.00 8.40 9.10 9.80 -20 C 2.33 2.55 2.65 3.17 3.35 3.60 3.99 4.65 5.05 5.25 5.65 6.25 7.50 8.15 8.75 0 C 2.07 2.25 2.35 2.74 2.95 3.18 3.54 4.13 4.48 4.70 4.95 5.50 6.60 7.15 7.70 Ambient Operating Temperature 23 C 40 C 50 C 1.75 1.49 1.34 1.90 1.60 1.46 2.00 1.70 1.53 2.30 1.94 1.72 2.50 2.10 1.90 2.70 2.28 2.03 3.00 2.55 2.30 3.50 2.98 2.65 3.80 3.23 2.95 4.00 3.40 3.10 4.50 3.83 3.40 5.00 4.25 3.75 6.00 5.10 4.50 6.50 5.50 4.90 7.00 5.95 5.25 60 C 1.24 1.35 1.42 1.60 1.75 1.90 2.13 2.50 2.70 2.80 2.95 3.25 3.90 4.25 4.55 70 C 1.00 1.09 1.14 1.30 1.40 1.52 1.71 2.00 2.17 2.28 2.50 2.75 3.30 3.60 3.85 85 C 0.88 0.95 1.00 1.15 1.25 1.35 1.50 1.75 1.90 2.00 2.05 2.25 2.65 2.85 3.05 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-USML Series - Low Ohmic PTC Resettable Fuses Solder Reflow Recommendations Notes: tp TP CRITICAL ZONE T L TO TP RAMP-UP TL * Temperature tL * TS MAX. RAMP-DOWN TS MIN. * * * ts PREHEAT MF-USML models cannot be wave soldered or hand soldered. Please contact Bourns for soldering recommendations. All temperatures refer to topside of the package, measured on the package body surface. If reflow temperatures exceed the recommended profile, devices may not meet the published specifications. Compatible with Pb and Pb-free solder reflow profiles. Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse(R) Polymer PTC Soldering Recommendation guidelines. 25 t 25 C TO PEAK Time Profile Feature Pb-Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3 C / second max. PREHEAT: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (Tsmin to Tsmax) (ts) 150 C 200 C 60~180 seconds TIME MAINTAINED ABOVE: Process Time Materials Temperature Description(TL) Temperature 217 C Interval Time (tL) paste to 60~150 seconds 1. Apply solder * Sn 96.5 / Ag 3.0 / Cu 0.5 Room temperature test board (8 - 10 mil Alloy water soluble or no Peak Temperature (Tthick) ) 260 C p clean solder paste Time within 5 C of Actual Peak(see Temperature (tp) 20~40 seconds note 1) * single sided epoxy glass Ramp-Down Rate 6 C / second max. (G10) (UL approved) Time 25 C to Peak Temperature 8 minutes max. * PC board approx. 4x4x.06 in. 2. Place test units onto board 6 units/board 3. How Ramp to up Order Convection oven 4. Preheat (TS) MF - USML 175 - 2 5. Time above liquidus (TL) (see note 2) 2.5 C 0.5 /sec. Typical Part Marking 1 5 0 C t o 1 9 0 C 90 3may 0 secvary. . Represents total content. Layout Multifuse(R) Product Designator 6. Peak temperature (TP) Series USML = 1210 Low-Ohmic Surface Mount Component 7. RaCurrent, mp downIhold Hold 175 - 700 (1.75 - 7.00 Amps) Packaging 8. Cleaning water clean profile High pressure deionized Packaged per EIA 481 water 65 PSI max. -2 = Tape and Reel Temperature of Lead/Pad Junction (Derived using 6-zone Convection Oven) MF-USML SERIES, REV. I, 02/19 220 C 60-90 sec. PART IDENTIFICATION: MF-USML175 = U17 MF-USML190 = U19 MF-USML200 = U20 MF-USML230 = U23 MF-USML250 = U25 MF-USML270 = U27 MF-USML300 = U30 MF-USML350 = U35 MF-USML380 = U38 MF-USML400 = U40 MF-USML450 = U45 MF-USML500 = U50 MF-USML600 = U60 MF-USML650 = U65 MF-USML700 = U70 U30 Room temperature (see note 2) 72 F to 160 F (22 C to 71 C) 250 C +0 /-5 10-20 sec. within 5 C of peak 3 C 0.5 C/sec. As required MANUFACTURING DATE CODE IS LOCATED ON PACKING LABEL. Inspect solder joint to determine if solder joint is acceptable (i.e. exhibits wetting of joint's surface). Use the following criteria (ref. acceptability of printed board assemblies, IPC-A-610): A) Acceptable (see Figure 1) (1) The solder connection wetting angle (solder to component and solder to PCB termination) does not exceed 90 . (2) Solder balls that do not violate minimum electrical clearances and are attached (soldered) to a metal surface. B) Unacceptable (see Figure 2) (1) Solder connection wetting angle exceeding Asia-Pacific: 90Tel: . +886-2 2562-4117 Email: asiacus@bourns.com (2) Incomplete reflow of solder paste. Europe: (3) Dewetting. Tel: +36 88 885 877 If unacceptable, determine cause and correct prior to next run. Email: eurocus@bourns.com The Americas: NOTES: Tel: +1-951 781-5500 1. WaterEmail: solubleamericus@bourns.com solder paste only above 100K. 2. Refer www.bourns.com to ref. temperature profile. Temperature at lead/pad junction with "K" type thermocouple. 3. Units that are board mounted for environmental testing must see a peak temperature in the reflow zone, as specified. This is to ensure that all test units will see "worst case conditions". Specifications are subject to change without notice. 4. Ramp down rate to be measured from 245 C to Users should verify actual device performance in their specific applications. 150 C. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5. Process Description 8 does not apply to open frame trimmers. MF-USML Series - Low Ohmic PTC Resettable Fuses MF-USML Series per EIA 481 12.0 0.3 (0.472 0.012) 4.0 0.1 (0.157 0.004) 4.0 0.1 (0.157 0.004) 2.0 0.05 (0.079 0.002) 2.9 0.10 (0.114 0.004) 3.50 0.10 (0.138 0.004) 4.5 (0.177) 1.5 + 0.1/-0.0 (0.059 + 0.004/-0) 5.5 0.05 (0.216 + 0.002) 1.75 0.10 (0.069 0.004) 10.25 (0.404) 0.6 (0.024) 0.1 (0.004) 0.65 0.10 (0.026 0.004) 1.10 0.10 (0.043 0.004) 390 (15.35) 160 (6.30) Tape Dimensions W P0 P1 P2 A0 B0 B1 max. D0 F E1 E2 typ. T max. T1 max. K0 (MF-USML175~MF-USML400) K0 (MF-USML450~MF-USML700) Leader min. Trailer min. Reel Dimensions 185 (7.283) 50 (1.97) 12.4 + 1/-0 (0.488 + 0.039/-0) 15.4 (0.606) A max. N min. W1 W2 max. DIMENSIONS: T D0 P2 P0 E1 MM (INCHES) W2(MEASURED AT HUB) COVER TAPE F E2 W B1 A N(HUB DIA.) B0 K0 T1 A0 P1 W1(MEASURED AT HUB) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Bourns PPTC Resettable Fuses 3312 - (R)2 Multifuse mm SMD(R) Trimming Potentiometer Application Notice * Users are responsible for independent and adequate evaluation of Bourns(R) Multifuse(R) Polymer PTC devices in the user's application, including the PPTC device characteristics stated in the applicable data sheet. * Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or fire. Circuits with inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated within the user's application during the PTC selection and qualification process. * Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions are expected to be repetitive or prolonged. * In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC device must be protected against mechanical stress, and must be given adequate clearance within the user's application to accommodate such thermal expansion. Rigid potting materials or fixed housings or coverings that do not provide adequate clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC devices if the thermal expansion is inhibited. * Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may adversely affect the performance of polymer PTC devices. * Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating, potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene, which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect on the device. * Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data sheet and on the Multifuse(R) Polymer PTC Moisture/Reflow Sensitivity Classification (MSL) note: https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf MFAN 12/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf