SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
T-1 (3mm) SOLID STATE LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: WP710A10QBC/G Blue
Features
zLow power consumption.
zPopular T-1 diameter package.
zGeneral purpose leads.
zReliable and rugged.
zLong life - solid state reliability.
zAvailable on tape and reel.
zRoHS compliant.
Description
The Blue source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
WP710A10QBC/G Blue (InGaN) Water Clear 1400 2500 20°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 461 nm IF=20mA
λD [1] Dominant Wavelength Blue 465 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.3 4 V IF=20mA
IR Reverse Current Blue 50 uA VR = 5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
Blue WP710A10QBC/G
SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
PACKING & LABEL SPECIFICATIONS WP710A10QBC/G
SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
SPEC NO: DSAL0522 REV NO: V.2B DATE: APR/10/2012 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029215
