Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model
150
-
50TC
GN
Features:
• DC – 3.0 GHz
• 150 Watts
• BeO Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Flangeless Termination
150 Watts, 50Ω
General Specifications
Resistive Element Thick film
Substrate Beryllium oxide ceramic
Cover Alumina Ceramic
Lead(s): 99.9% pure silver (.006 thick)
Terminals Thick film silver
Electrical Specifications
Resistance Range: 50 ohms, ± 5%
Frequency Range; DC – 3.0 GHz
Power: 150 Watts
VSWR
1.10:1 DC – 1.0 GHz
1.30:1 DC – 2.0 GHz
1.40:1 DC – 3.0 GHz
Note: Tolerance is ±0.010”, unless otherwise specified. Designed to meet of
exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to
150ºC (see chart for derating temperatures).
All dimensions in inches.
Specifications subject to change with out notice.
Outline Drawing
150-50TCGN (097) Rev A
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model
150
-
50TCG
N
Typical Performance:
Power De-rating: Mounting Footprint and Procedure:
NOT RECOMMENDED APPLICATION
BOARD LOWER
THAN LEAD. THAN LEAD.
BOARD HIGHER
SCALE: NONESCALE: NONE
BOARD EVEN
WITH LEAD.THAN LEAD.
BOARD LOWER
SUGGESTED STRESS RELIEF METHODS
(2 PLACES)
.025 MIN.
SUGGESTED MOUNTING PROCEDURES:
1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2.
3. SOLDER LEADS IN PLACE USING AN APPROPPRIATE TYPE SOLDER
WITH A CONTROLLED TEMPERATURE IRON. KEEP LEAD
LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED
POSITION DEVICE ON MOUNTING SURFACE AND SOLDER
IN PLACE USING AN APPROPRIATE TYPE SOLDER.
STRESS RELIEF METHOD.
150-50TCGN (097) Rev A
