The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 2.4(2.5Max) 1.9(2.0Max) U.FL-LP(V)-040 E.FL-LP-040 E.FL-LP-066 3(3.2Max) U.FL-LP-040 U.FL-LP-066 U.FL Features E.FL Space Factor of Mated Connector 1.Extremely Small Occupied Mounting Area Reduced board space requirement by 18% to 7.7mm2, when compared with Hirose's E.FL connectors. Plug Dia.0.81 2.5Max 2.Light Weight One of the world's lightest coaxial connectors. Receptacle: 15.7mg 3.Frequencies of Up to 6GHz U.FL-R-SMT Receptacle To meet the frequency requirements of a wide variety of miniature equipment, these connectors offer high frequency performance from DC to 6 GHz. Supplied on tape-and-reel packaging. Cable Plug Dia.1.32 Dia.1.13 5.Use of Ultra-fine Teflon Cable U.FL-R-SMT Receptacle (R) NEW 6. Simple Disconnection 7.User Friendly Mating Operation Plug 2.0Max Dedicated tool allows reliable un-mating of the plug. Cable U.FL-R-SMT Receptacle NEW Plug U.FL-LP-062 Cable Dia.1.00 2.4Max Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc. U.FL-LP(V)-040 Dia.0.81 Tactile lock feeling ensures and confirms reliable connection. Applications U.FL-LP-066 2.5Max 4.Board Placement with Automatic Equipment Several of ultra-fine single and double shielded Teflon coaxial cables terminate to U.FL plug. Cable U.FL-LP-040 U.FL-R-SMT Receptacle NEW U.FL-LP-088 Cable 2.4Max Plug *Teflon is a registered trademark of DuPont. Dia.1.37 U.FL-R-SMT Receptacle 2004.2 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Nominal characteristic impedance Voltage rating Frequency range Ratings Item 1. Contact resistance 50 ohms 60 V AC (rms) DC to 6 GHz Operating temperature range Operating humidity Specification Conditions Center: 20 m ohms max. 10 mA max. Outside: 10 m ohms max. 2. Insulation resistance 500 M ohms min. 3. Withstanding voltage No flashover or insulation breakdown. 100 V DC 200 V AC / 1 minute Part No. Up to 3GHz 3 to 6GHz U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max U.FL-LP-068 dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max U.FL-LP-062 dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max 1.3 Max 1.4 Max 4. V.S.W.R.* U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 5. Center contact holding force 0.15 N min. 6. Durability -40C to +90C 90% max. Measured with a O 0.475 pin gauge Contact resistance (mating/un-mating, Center: 25 m ohms max. with corresponding plug) Outside: 15 m ohms max. 30 cycles Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration 7. Vibration No electrical discontinuity of 1s min. of 59m/s2, for 5 cycles in the direction of each of the 3 axis. 8. Shock No damage, cracks or parts dislocation. Acceleration of 735 m/s2, 11ms duration, sine half-wave 9. Humidity No damage, cracks or parts dislocation. waveform, 6 cycles in each of 3 axes. (Steady state) Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40c and humidity of 95%. Insulation resistance 500 M ohms min.(when dry) 10. Temperature cycle No damage, cracks or parts dislocation. Contact resistance:25 m ohms max. (Center) 15 m ohms max. (Outside) 11. Salt spray test Temperature:-40C/+5 to +35C/+90C/+5 to +35C Time: 30 / 5 max. /30 /5 max.(Minutes) 5 cycles 5% salt water solution, 48 hours No excessive corrosion *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Note 1: Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2: Board type connectors were mounted to a 50 glass epoxy board and measurements were conducted with SMA conversion adapters attached. Material/Finishes Part Material Finish Remarks Shell Phosphor bronze Silver plated ---------- Male center contact Brass Gold plated ---------- Gold plated ---------- Plug Phosphor bronze PBT Color: Black UL94V-0 Receptacle LCP Color: Beige UL94V-0 Female center contact Insulator 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacles Cut Out Prohibition Area GND 40.05 1.90.05 GND SIG 1.050.05 2.20.05 1.2Max(Note 3) 1.25 0.35 2.6 1.8 (3.1) Note 1: Receptacles of (01) specification are sold by the bag with 100 pieces per bag. Please order in pack units. Note 2: Receptacles of (10) specification are sold by the reel (which contains 2,500 pieces). Please order in reel units. Note 3: This area may be covered by insulating material. 3 2.6 0.6 10.05 GND O2 GND SIG 10.05 Recommended PCB mounting pattern Part No. CL No. U.FL-R-SMT(01) 331-0471-0-01 Bag packaging (100 pieces/bag) Packaging Weight (mg) U.FL-R-SMT(10) 331-0471-0-10 Reel packaging (2500 pieces/reel) 15.7/unit Packaging Specifications 20.1 40.1 0.3 Center contact 5.50.1 1 0. + 0 .5 80.1 1.6 Unreeling direction Reel Dimensions 1.8 14 O13 O21 O3302 120.3 O1 1.750.1 Embossed Carrier Tape Dimensions 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Cable Assembly (Plug) U.FL-LP-062 3 Part No. 5 1.8 1.5 1.93 1.93 Mated Height 4 3.4 4 1.85 4 U.FL-LP-088 2.8 U.FL-LP(V)-040 2.8 U.FL-LP-066 3 3 U.FL-LP-040 2.5mm Max. 2.5mm Max. 2.0mm Max. 2.4mm Max. 2.4mm Max. (2.4mm Nom.) (2.4mm Nom.) (1.9mm Nom.) (2.3mm Nom.) (2.3mm Nom.) Applicable Dia. 0.81mm cable Coaxial cable Weight (mg) 53.7 Dia. 1.13mm and Dia. 1.32mm Coaxial cable 59.1 Dia. 0.81mm Dia. 1mm Dia. 1.37mm Coaxial cable Coaxial cable Coaxial cable 34.8 45.5 71.7 Cable Guide Description Dia.0.81mm Coaxial Cable Dia.1.13mm Coaxial Cable Dia.1.32mm Coaxial Cable Dia.1mm Coaxial Cable Dia.1.37mm Coaxial Cable Cable Type 04 068 066 062 088 Cable Specification Inner Conductor* Dielectric Diameter Outer Conductor* Jacket Diameter 7/0.05 SA (AWG36) Dia.0.40 Single Dia.0.81 PFA Shield SA PFA 7/0.08 SA (AWG32) Dia.0.68 Single Dia.1.13 FEP Shield SA[TA] FEP 7/0.08 SA (AWG32) Dia.0.66 Double Dia.1.32 FEP Shield TA FEP 7/0.071 SA Dia.0.62 Tape, single Dia.1 (AWG33) FEP Shield TAT FEP 7/0.102 SA Dia.0.88 Single Dia.1.37 (AWG30) FEP Shield TA FEP Nominal attenuation Nominal Impedance At 3GHz At 6GHz 50 ohms 6.45dB/m 9.42dB/m 3.43dB/m 5.13dB/m [3.73dB/m] [5.44dB/m] 50 ohms 3.8dB/m 5.6dB/m 50 ohms 3.1dB/m 4.4dB/m 50 ohms 2.8dB/m 4.3dB/m 50 ohms (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. How to Specify Plug Cable Assembly Dimensions of U.FL Series assembly products should be made as indicated below. Single-Ended Cable Assembly Double-Ended Cable Assembly L L Total Standard Tolerance for Total Length of Cable Assembly Ordering Information U.FL - [] LP - [] - A - (L) 1 2 3 4 1 Series name U.FL 2 Assembly type LP: Single ended 2LP: Double ended 3 Cable type 04 : Dia.0.81mm Coaxial Cable 068 : Dia.1.13mm Coaxial Cable 066 : Dia.1.32mm Coaxial Cable 062 : Dia.1 mm Coaxial Cable 088 : Dia.1.37mm Coaxial Cable 4 Total Length(mm) Length is expressed in mm units. Part No. of Plug U.FL-LP-040 U.FL-LP-068 U.FL-LP-066 U.FL-LP(V)-040 U.FL-LP-062 U.FL-LP-088 Part No. of Cable Assembly Total Length(mm) 00350< =L< =00200 Standard Tolerance (mm) 02000<L< =00500 < 05000<L =01000 08 10000<0L< =1000 1.5% 04 12 Note: Shortest length L is 35 mm. Description U.FL-2LP-04N1-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP-04N2-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP-04N1-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP-04N2-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-068N1-A-(L) Dia. 1.13mm double ended coaxial cable, color: gray U.FL-2LP-068N2-A-(L) Dia. 1.13mm double ended coaxial cable, color: black U.FL-LP-068N1-A-(L) Dia. 1.13mm single ended coaxial cable, color: gray U.FL-LP-068N2-A-(L) Dia. 1.13mm single ended coaxial cable, color: black U.FL-2LP-066J1-A-(L) Dia. 1.32mm double ended coaxial cable, color: gray U.FL-2LP-066J2-A-(L) Dia. 1.32mm double ended coaxial cable, color: black U.FL-LP-066J1-A-(L) Dia. 1.32mm single ended coaxial cable, color: gray U.FL-LP-066J2-A-(L) Dia. 1.32mm single ended coaxial cable, color: black U.FL-2LP(V)-04N1-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP(V)-04N2-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP(V)-04N1-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP(V)-04N2-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-062N1D-A-(L) Dia. 1mm double ended coaxial cable, color: gray U.FL-2LP-062N2D-A-(L) Dia. 1mm double ended coaxial cable, color: black U.FL-LP-062N1D-A-(L) Dia. 1mm single ended coaxial cable, color: gray U.FL-LP-062N2D-A-(L) Dia. 1mm single ended coaxial cable, color: black U.FL-2LP-088K1T-A-(L) Dia. 1.37mm double ended coaxial cable, color: gray U.FL-2LP-088K2T-A-(L) Dia. 1.37mm double ended coaxial cable, color: black U.FL-LP-088K1T-A-(L) Dia. 1.37mm single ended coaxial cable, color: gray U.FL-LP-088K2T-A-(L) Dia. 1.37mm single ended coaxial cable, color: black Please contact Hirose Sales Representative for cable length and cable end treatment. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Conversion Adapters SMA Conversion Adapter (Mating portion: U.FL side jack - SMA side plug) (10.7) Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. 8HEX Part No. CL No. HRMP-U.FLJ 311-0300-2 SMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) 14.05 (4.05) 5.6 O6.35 6 1/4-36UNS-2A Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. SMA Conversion Adapter (Mating portion: U.FL side plug-SMA side jack) Part No. CL No. HRMJ-U.FLP 311-0301-5 (18.6) (4) 6 5.5 1/4-36UNS-2A Note: This connector is used by compressing the mated portion of U.FL side onto the U.FL-R-SMT portion. Part No. CL No. HRMJ-U.FLP-ST1 311-0385-5 Receptacle Inspection 12.9 This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. (7.9) (4.4) 7HEX 5 1 M50.5 This receptacle is used for check the continuity, withstanding voltage, and other performance of the cable assembly products. Part No. CL No. U.FL-R-1 331-0466-0 Plug Extraction Tool (90) This jig is used for extraction from a mating condition. O15 U.FL 2.1 5 50 Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088. Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062. 6 Part No. CL No. U.FL-LP-N-2 331-0494-5 U.FL-LP(V)-N-2 331-0493-2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Usage Precautions 1. Plugs (1) Connection/ disconnection of connectors 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. 2) To mate the connectors, the mating axes of both connectors must be Extraction Jig aligned and the connectors can be mated. The "click" will confirm fully U.FL Cable mated connection.Do not attempt to insert on an extreme angle. Assembly U.FL-R-SMT After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. U.FL-LP-040 2N max. U.FL-R-SMT (2) Permissible load on the cable after connector are mated. 4N max. 2N max. (3) Precautions Do NOT forcefully twist or deform wires. Temperature on Top Portion of Part 2. Receptacles (1) Recommended soldering temperature profile (c) 260 240 220 200 180 160 140 120 100 80 Heating peak 240c 3 seconds Preheating 183c (130 to 165c) Within 2 minutes 40 to 50 seconds Time 1) The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2) The temperature profile will change depending on conditions which include such factors as the size of the board, the solder used, and the solder thickness. (2) Recommended manual soldering Manual soldering: 350C for 5 seconds (3) Recommended screen 0.1 to 0.15 mm thickness 7