CATV Series S/DACtor Data Book CATV Series The P1400AD SIDACtor is a 1000A rated solid state protection device offered in a TO-220 package and is designed to meet the severe surge requirements found in a CATV environment. Used in Hybrid Fiber Coax (HFC) applications, the P1400AD replaces the gas tube that is traditionally used for station protection due to the P1400ADs tight voltage tolerances. Electrical Parameters P1400AD 200 Notes: + Ail measurements are made at an ambient temperature of 25C. * Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities. * Vorm is measured at lorry. * Vg is measured at 100V/us. * Special voltage (Vs & Vory) and holding current (|,,;) requirements are available upon request. Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value. Surge Ratings P1400AD [ - 32 Teccor Electronics, Inc. (972}580-7777 SIDACtor Data Book CATV Series Thermal Considerations Series Symbol " Parameter Value | Unit. T; Junction Temperature Range -40 to +150 C Ts Storage Temperature Range -65 to +150 C P1400AD Ty Maximum Case Temperature +75 c Reic Thermal Resistance: junction to case +28 CW Roja Thermal Resistance: junction to ambient +90 CW V-! Characteristics t,xty Pulse Wave-form +i a a t, = rise time to peak value g - : F400 | pe Genk. _ = decay time to half value o e a 3 D V 2 50 a x o oS a. ' = 0 ta t - Time (ps) Junction Temperature Normalized Vg Change vs. Normalized DC Holding Current vs. Case Temperature Percent of Vg Change - % -40 -20 0 20 40 60 80100120140 160 Junction Temperature (T) - C 25 C) Ratio of iy Te -40 -20 0 20 40 60 80100120140 160 Case Temperature (Tc) - C Teccor Electronics, Inc. (972) 580-7777 1-33