MAN02 MAN15 MAN30 Manometer Users Manual * Mode d'emploi * Bedienungshandbuch * Manual d'Uso * Manual de uso Users Manual MAN02_15_30 Rev001 (c) 2009 Amprobe Test Tools. All rights reserved. English MAN02 MAN15 MAN30 Manometer Limited Warranty and Limitation of Liability Your Amprobe product will be free from defects in material and workmanship for 1 year from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Amprobe's behalf. To obtain service during the warranty period, return the product with proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe dealer or distributor. See Repair Section for details. This warranty is your only remedy. All other warranties - whether express, implied or stautory - including implied warranties of fitness for a particular purpose or merchantability, are hereby disclaimed. Manufacturer shall not be liable for any special, indirect, incidental or consequential damages or losses, arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Repair All test tools returned for warranty or non-warranty repair or for calibration should be accompanied by the following: your name, company's name, address, telephone number, and proof of purchase. Additionally, please include a brief description of the problem or the service requested and include the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the form of a check, a money order, credit card with expiration date, or a purchase order made payable to Amprobe(R) Test Tools. In-Warranty Repairs and Replacement - All Countries Please read the warranty statement and check your battery before requesting repair. During the warranty period any defective test tool can be returned to your Amprobe(R) Test Tools distributor for an exchange for the same or like product. Please check the "Where to Buy" section on www. amprobe.com for a list of distributors near you. Additionally, in the United States and Canada InWarranty repair and replacement units can also be sent to a Amprobe(R) Test Tools Service Center (see address below). Non-Warranty Repairs and Replacement - US and Canada Non-warranty repairs in the United States and Canada should be sent to a Amprobe(R) Test Tools Service Center. Call Amprobe(R) Test Tools or inquire at your point of purchase for current repair and replacement rates. In USA Amprobe Test Tools Everett, WA 98203 Tel: 877-AMPROBE (267-7623) In Canada Amprobe Test Tools Mississauga, ON L4Z 1X9 Tel: 905-890-7600 Non-Warranty Repairs and Replacement - Europe European non-warranty units can be replaced by your Amprobe(R) Test Tools distributor for a nominal charge. Please check the "Where to Buy" section on www.amprobe.com for a list of distributors near you. European Correspondence Address* Amprobe (R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 *(Correspondence only - no repair or replacement available from this address. European customers please contact your distributor.) 3 MANOMETER DIF DATALOGGER HOLD REC MAX MIN BAT inH2 O psi mbar bar 1 2 3 4 5 6 10 12 13 3 Primary data screen displays pressure value "-" Minus pressure display MAX MIN pressure recorded REC starts recording mode and displays 11 max./min. pressure recorded MANOMETER DIF DATALOGGER HOLD DC power input jack USB output port (USB cable not included) H/M/S 88:88:88 displays time in Hour/ 1 2 4 ON/OFF Pushbutton Record pushbutton Data Hold pushbutton Differential pushbutton Unit Selector pushbutton Backlight pushbutton mmH2O REC MAX MIN BAT inH2 O psi mbar 9 bar mmH2O 7 8 Minute/Second Pressure unit indication BAT Low battery indicator DIF Differential pressure mode 6 5 Indicator "+" Positive pressure connection input "-" Negative pressure connection input Data Hold freezes pressure reading 4 MAN02 / MAN15 / MAN30 Manometer Contents INTRODUCTION....................................................................................................................................2 FEATURES..............................................................................................................................................2 STANDARD ACCESSORIES....................................................................................................................2 QUICK START........................................................................................................................................3 AUTO POWER OFF................................................................................................................................3 OPERATION MODE...............................................................................................................................3 CALIBRATION MODE............................................................................................................................4 Calibration point reference............................................................................................................5 MANUAL ZERO SETTING......................................................................................................................5 TROUBLE SHOOTING............................................................................................................................5 Replacing The Battery....................................................................................................................6 USB PC INTERFACE CAPABILITIES........................................................................................................6 Download Suite Software installation..........................................................................................6 Operation........................................................................................................................................6 MAINTENANCE.....................................................................................................................................7 Cleaning..........................................................................................................................................7 SPECIFICATIONS....................................................................................................................................7 Operating Conditions.....................................................................................................................7 1 Congratulations on your purchase of the Amprobe MAN02 MAN15 MAN30 manometers. These instruments are portable, battery operated pressure measuring device. They are ideal for HVAC/R technicians measuring pressure level, Medical equipment, Computer peripherals, pneumatic controls. Introduction * The meter will display all LCD segments when it is first turned on for approx. 3 seconds. * The LCD is divided into two distinct sections : One large (primary) top screen and one smaller right bottom screen (relative Clock). The two display areas will constantly update with the pressure measurements. Features The meter measures: * Gauge pressure - a measurement of pressure that is referred to ambient pressure. * Differential pressure - a measurement of difference of two pressures . * 5 selectable units of measure: in H2o, psi, mbar, bar, mmH2o. (For MAN02) * 11 selectable units of measure: bar, mmHg, ozin2, Kgcm2, psi, inH2O, kpa, ftH2O, inHg, cmH2O, mbar (For MAN15 and MAN30)Standard Accessories. * Please check that the tubing is not leaking or damaged before use. STANDARD ACCESSORIES The package contains: * Manometer * One 9V Battery * Users manual * 2 connection hoses 4mm(ID) x 6mm(OD) x 500mm * Carrying Case 2 Quick Start Unscrew battery compartment on the rear of the instrument and insert the battery. Replace cover and secure with screw. 1. Press to switch the instrument on. to select unit of pressure measurement required. For zeroing, press 2. Press three seconds. 3. Press for differential pressure measurement. 4. Press to freeze the reading on the display. Press again to cancel feature. for to start a recording; press again to display MAX value of the recording session; 5. Press press again to display MIN value of the recording session; and press again to return to real time recording mode. The Instrument records only the Max and the Min values for each session. To record all values for a recording session, use the Download Suite Software. Press and hold for 3 seconds to turn clock feature off. Note: Clock feature available with gauge pressure only, not differential. The instrument will automatically switch off after 20 minutes unless sleep mode is disabled. 6. Press to turn ON the back-light. It automatically switches off after 30 seconds. Auto Power Off (Sleep mode function) This instrument will turn off automatically in approx. 20 minutes after power-on if there are no key activations. For recording or operating over longer periods of time, you can disable the simultaneously before powering on. sleep mode by pressing and An "n" will appear in the middle of the screen at which time you can release the button. (See Fig. 1) The disable sleep mode will be invalid after power off. Operation Mode (See Fig. 18.) 1. Turns instrument on and off. 2. Press momentarily and relative clock starts in the lower right screen. REC is displayed in the middle left of screen (Fig.2).The other functions are locked out except Power and Backlight. Press momentarily again and the unit cycles through MAX (Fig. 3) and MIN (Fig.4) and back to current pressure reading; the record mode is displayed on the LCD. Press and hold for 3 seconds to turn off the record function and return to normal mode. 3. Press momentarily to freeze the pressure reading (Fig. 5). 4. Press momentarily, DIF appears on top of the LCD and the display indicates the relative zero (relative zero causes the value of the display to show as "0.0") - only the amount of pressure change will be indicated. Press momentarily again and the unit returns to the normal mode of pressure differential (see Fig.6). 3 Differential Pressure: a measurement of the difference between two pressures, i.e. use differential pressure sensor to measure gauge pressure by leaving one process connection open to atmosphere and connecting the second sensor port to your system. 5. Press momentarily and the units will cycle through 5. "InH2o","psi", "mbar", " bar","mmH2o" which are indicated on the bottom of the display. (For MAN02) 6. Press momentarily and the units will cycle through bar, mmHg, ozin2, Kgcm2, psi, inH2O, kpa, ftH2O, inHg, cmH2O, mbar which are indicated on the bottom of the display (See fig.7 & 8). (For MAN15 and MAN30) 7. Press momentarily and the backlight illuminates for approx. 30 seconds, then turns off automatically. Press momentarily to decrease the figure when calibration is being performed. Calibration Mode Calibration mode is only applicable for a standard manometer calibrator or any qualified meter calibration facility for annual calibration. 1. First, manually set the display to zero (no pressure applied to the connector ), refer to the manual zero procedure. 2. Turn the meter off. simultaneously, "CA" appears on the display, (See Fig. 9 ) the meter enters 3. Press & to the calibration mode, make sure the units setting on "PSI" to start positive (+) pressure calibration. 4. The meter has defaulted as 1.6 psi (for MAN02); 12.00 psi (for MAN15); 24.00 psi (for MAN30) calibration point, the adjustable pressure range is from 1.5 to 1.7 (for MAN02); 11.70 to 12.30 (for MAN15); 23.40 to 24.60 (for MAN30). If calibration pressure source is not 12.00 key, or decrease by pressing key to set calibration point as psi, increase by pressing required. key, "SA" and small "CA" appears on the display 5. Save the calibration point by pressing in 2 seconds (See Fig. 10). The meter auto-skips to the negative pressure (-) point for next calibration mode. 6. Follow the same procedure as step 4 for the negative pressure calibration point. The LCD now displays" -12.00 " and small"CA" (See Fig.11 ). Perform the necessary calibration figure. Refer to your pressure standard if needed. key, "SA" and "CA" appears in 2 seconds 7. Again save the calibration point by pressing ;"End"and "CA" appear in another 2 seconds. The meter turns back to and then press the normal mode (See Fig. 12 ). If you can't save by pressing key, i.e. no "SA" appeared, please check the followings: * The calibration pressure source could be referred to the following table. * if you entered the right positive pressure (+) or negative pressure (-). 4 If you want to skip positive (+) calibration when in the calibration mode, press skip to negative (-) calibration point. key to Calibration point reference Model Psi Range Calibration point (+/-) MAN02 0~+/-2 1.6 Recommended (+/-) MAN15 0~+/-15 12.00 11.70 ~ 12.30 MAN30 0~+/-30 24.00 23.40 ~ 24.60 1.5 t ~ 1.7 Manual Zero Setting When you set the display to zero( no pressure applied to the connector), press the key for 2 seconds. The meter should display "- 0 .000" from right to left (See Fig.13). Then, the LCD display shows normal mode. Trouble shooting Cannot Power on. Check the battery connections. Replace the battery or attach Optional AC adaptor. Low BAT indication. Replace the battery when LCD displays BAT. No Display. * * * Make sure the battery is functional. check if sleep mode is active. Refer to disable sleep mode on page.6 to turn it off. check if the tubing is connected to the meter tightly. Err.1. For the pressure value exceeding the maximum range, " Err.1" appears on the display (See Fig. 14). Do not exceed rated over pressure range of manometer. Sensor may be damaged. Err.2. For the measurement pressure less than minimum range, "Err. 2" will appear (See Fig. 15). Err.3. For a differential pressure value larger than maximum display, "Err.3" appears on the display (See Fig.16 ). Err.4. When you set zero, make sure you have disconnected the tubing. If you see an "Err.4" appear on the display, it means the manometer is damaged (See Fig.17) Note. Err.4 Will be also appear If the tubing is connected during zero set. 5 E1OL or E2UL. When you see these errors while operating computer software, it means pressure source is less or over than the range of the instrument. Replace your 9-volt battery when: * The BAT icon appears on the right of the screen. * The meter will not power on. * Use of the back-light causes the BAT icon to appear. Replacing The Battery Even if the battery was recently replaced, check its voltage level if you get no response from your instrument. To replace the battery: 1. Remove the tubing from the instrument. 2. Lay the instrument face-down on a clean, flat surface. 3. Remove battery cover. Remove battery from instruments that you do not plan to use for a month or more. Do not leave battery in instrument. USB PC interface capabilities The USB cable and the Download Suite software are required to transfer data to a PC. The USB port is located on the right side of the instrument. The USB Cable is not included. It can be purchased separately as an optional accessory. Download Suite Software installation Insert the Download Suite CD into the CD-ROM drive. To install the software, follow the on-screen instructions. Operation To open the program, double-click the Download Suite icon. To transfer data to a PC, follow the on-screen instructions. 6 Maintenance The meter is calibrated in house before shipping. When properly maintained, the meter will maintain its accuracy as specified. Cleaning Use a damp cloth and mild soap to clean the case of the MAN15 Manometer, do not use harsh detergents or abrasives as these may mar the finish or damage the unit's case with an adverse chemical reaction. Specifications Operating Conditions * Compensated temperature range: 0~50 C (32~122 F) * Operating temperature range: 0~50 C (32~122 F) * Storage temperature range: -20~60 C (-4~140 F) * Operating Humidity Max. 80% RH Power Supply : 9 volt battery Exceeding Maximum pressure will cause permanent sensor damage. Range: 0 ~ 2 psi (MAN02) 0 ~ 15 psi (MAN15) 0 ~ 30 psi (MAN30) Power Supply : Conversion & Resolution 1 psi = Resolution inch of HO 0.401 0.01 psi 0.0145 0.001 mbar 1 0.1 bar 0.001 0.001 mm of HO 10.2 1 7 1 psi = Resolution bar 0.068948 0.001 mmHg 51.715073 0.5 ozin2 16.000844 0.2 Kgcm2 0.070309 0.001 psi 1 0.01 inH2O 27.679904 0.3 kpa 6.894757 0.1 ftH2O 2.306659 0.02 0.01 inHg 2.036021 cmH2O 70.306955 1 mbar 68.94757 1 Accuracy: 0.3% of full scale at 25C (77F) Repeatability: 0.2%~0.5% of full scale Linearity / Hysteresis: 0.29% to 1% of full scale Combined accuracy: 1.0% of full scale Dimension: 72 x 182 x 30mm Unit Weight: Approx. 220 (o.485lb) (with battery) Response Time: 0.5 seconds Format:Baud rate: 2400 bit/sec Data bit: 8, Stop bit: 1 Parity: none 8 REC Fig. 1 : H/M/S : Fig. 3 Fig. 2 DIF Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 9 Fig. 13 Fig. 15 Fig. 14 Fig. 16 Fig. 17 MANOMETER DIF DATALOGGER HOLD REC MAX MIN BAT inH2 O psi mbar bar mmH2O 1 2 3 4 5 6 Fig. 18 10