Document 554-1 Shielded Power Inductors - LPS6225 * Low DCR; high current; shielded construction * Perfect for backlight applications Designer's Kit C349 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 309 - 331 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7 reel; 2500/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: 3.1 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5Irms (A)6 DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C Part number1 20% (H) (Ohms) (MHz) drop drop drop rise rise LPS6225-122ML_ LPS6225-222ML_ LPS6225-332ML_ LPS6225-472ML_ LPS6225-682ML_ 1.2 2.2 3.3 4.7 6.8 0.040 178 0.045 100 0.055 68 0.065 53 0.095 40 5.3 3.9 3.5 3.0 2.6 5.4 4.0 3.5 3.1 2.7 5.4 4.1 3.6 3.2 2.8 1.1 1.0 1.0 0.90 0.90 1.65 1.40 1.35 1.30 1.30 2.1 2.1 1.4 1.1 0.98 2.1 2.2 1.5 1.2 1.0 2.2 2.2 1.6 1.2 1.0 0.90 0.85 0.80 0.65 0.60 1.30 1.20 1.10 0.90 0.80 LPS6225-103ML_ LPS6225-153ML_ LPS6225-223ML_ LPS6225-333ML_ LPS6225-473ML_ 10 15 22 33 47 0.105 0.135 0.175 0.260 0.360 35 23 17 14 10 LPS6225-683ML_ LPS6225-104ML_ LPS6225-124ML_ LPS6225-154ML_ LPS6225-224ML_ 68 100 120 150 220 0.420 0.610 0.750 0.920 1.30 9.6 7.7 7.4 6.4 5.0 0.58 0.48 0.42 0.39 0.32 0.61 0.51 0.45 0.41 0.34 0.62 0.52 0.46 0.42 0.35 0.57 0.47 0.43 0.40 0.37 0.74 0.64 0.58 0.54 0.50 LPS6225-334ML_ LPS6225-474ML_ LPS6225-684ML_ LPS6225-105ML_ LPS6225-155ML_ 330 470 680 1000 1500 2.00 2.60 4.00 6.00 9.00 3.8 3.2 2.8 2.3 1.8 0.26 0.22 0.18 0.15 0.12 0.27 0.23 0.19 0.16 0.13 0.28 0.24 0.20 0.17 0.13 0.28 0.24 0.18 0.15 0.13 0.39 0.37 0.26 0.24 0.20 LPS6225-185ML_ LPS6225-225ML_ LPS6225-335ML_ LPS6225-475ML_ LPS6225-565ML_ 1800 2200 3300 4700 5600 11.7 13.5 21.0 30.0 36.0 1.7 1.3 1.1 0.90 0.72 0.11 0.10 0.099 0.086 0.083 0.12 0.10 0.10 0.096 0.090 0.12 0.11 0.11 0.10 0.096 0.11 0.11 0.080 0.075 0.070 0.14 0.13 0.11 0.090 0.090 LPS6225-685ML_ 6800 LPS6225-825ML_ 8200 LPS6225-106ML_ 10000 43.0 54.0 70.0 0.70 0.080 0.086 0.089 0.065 0.080 0.69 0.079 0.086 0.088 0.060 0.075 0.68 0.075 0.084 0.087 0.060 0.065 1. Please specify termination and packaging codes: LPS6225-106MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 554-1 Revised 12/01/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 554-2 Shielded SMT Power Inductors - LPS6225 Series Typical L vs Frequency Typical L vs Current 10000 10000 3300 H 1000 H 330 H 100 H 100 33 H 10 H 10 1 0.01 1000 H 1000 Inductance (H) 1000 Inductance (H) 3300 H 0.1 Current (A) 1 10 Current Derating 330 H 100 H 100 33 H 10 H 10 1 0.01 10 Frequency (MHz) 0.236 0.003* 6,00 0,076 120 110 100 XXX X 90 80 70 Dash number 60 0.236 0.003 * 6,00 0,076 Winding direction Internal code 50 0.094 0.004** 2,40 0,10 40 30 20 10 0 25C Percent of rated current 1 0.1 Isat Irms -40 -20 0 20 Recommended Land Pattern 0.079 2,00 40 60 80 100 0.165 4,20 120 140 Ambient temperature (C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.165 4,20 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. **For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Dimensions are in Document 554-2 inches mm Revised 12/01/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.