5B Series Accessories
5B Series Overview | 5B Series Model Definitions | Available 5B Series Modules | 5B Series Backplanes and Mounting Cards
| 5B Series Power Supplies | 5B Series Configuration Guide | 5B-Series-Custom-Configuration-Ranges
Model AC1361 temperature sensor provides cold junction temperature measurement for
thermocouple applications on user-designed backplanes or mounting boards. These SIP
temperature sensors are provided on each channel of all Analog Devices, Inc. backplanes and
mounting boards.
The minimum purchase quantity for the AC1361 is 50 pieces.
Model AC1361
Order Now
Model AC1362 is a 20 Ω, 0.1% (typical), 1/8 watt, 20 ppm/°C replacement plug-in resistor that is fully
encapsulated. The AC1362 is supplied with each 5B32 Current Input Module.
Model AC1362
Order Now
CJC Sensor
Current Conversion Resistor
Single Channel Socket
Products > 5B Series Accessories Products > 5B Series Accessories
CJC Sensor
Current Conversion
Resistor
Single Channel
Socket
Rack Mount Kit
Configuration
Jumpers
Cables
Power Supplies and
Power Cord
Interface Board
5B Series User
Manual
AnalogDialogue EngineerZone Wiki Careers
A single channel test socket with screw terminals and cold junction compensation for module
evaluation. DIN rail compatible. Model AC1360.
Model AC1360
Order Now
Model AC1363 is a single-piece metal chassis for mounting the 5B01, 5B02, 5B08 or
5B08-MUX backplanes in a 19" rack, requiring 19" x 3.5" area. Additionally, the
encapsulated power supply, Model PWR-01, as well as the AC1324 interface card, may
be mounted on the rear of the AC1363 using mounting holes provided.
Model AC1363
Order Now
Model AC1344 contains 10 jumpers and are used to configure the 5B01, 5B02, 5B08 and
5B08-MUX backplanes.
Please contact Customer Service to check availability for Model AC1344.
Model AC1344
The AC1315 is a 2' (60cm) 26-pin flat ribbon cable with two connectors. Used with the
AC1324 screw terminal interface board, the AC1315 cable connects directly to either the
P1 or P2, 26-pin I/O system connector on the 5B Series backplanes.
Model AC1315
Order Now
The CAB-01 is a 26-pin cable with 3 connectors used to daisy-chain 5B02 16-channel, or
5B08-MUX 8-channel mux backplanes. The number of CAB-01 cables needed is equal to
the number of backplanes to be connected minus one. A maximum of four backplanes
can be chained together, requiring three CAB-01 cables and one AC1315 cable (or similar
cable) to connect to an interface board or control system.
Model CAB-01
Rack Mount Kit
Configuration Jumpers
Cables
Order Now
Model PWR-01 is a chassis mounted AC/DC, regulated, + 5 V dc output power supply
which can be mounted on the rear of Model AC1363 rack mount kit, using mounting
screws provided. Since this modular supply is fully encapsulated, no external components
are required - simply mount the unit and connect AC power - using Model AC1340-D
power cord (in U.S.A.)- and output leads. Refer to the Power Supply section for complete
electrical and mechanical specifications on these power supplies.
Model PWR-01
Order Now
Please contact Customer Service to check availability for Model AC1340-D.
Model AC1340-D
The AC1367 is a voltage-switch input module that allows a convenient, low cost and safe
connection of a high-level per-conditioned analog signal to the 5B Series Backplane
system connector. This module accepts a -5V to +5V input and provieds a -5V ti +5 output,
while protecting computer-side circuitry from field-side overvoltage faults. There is no gain
or attenuation of the input signal and the output is not isolated. In addition, AC1367
modules are mix-and-matched and hot swappable, so can be inserted or removed from
any socket in the same backplane without disrupting system power.
Model AC1367
Order Now
The 5BDS module directly connects the Input Lo to Output Lo and Input Hi to Output Hi.
This accessory (when installed into a 5B backplane) allows a customer to connect a Non-
Isolated signal to the input screw terminals of the backplane and have the signal pass
through to the output side of the backplane. This can be useful if a customer has a signal
they would like to measure that does not require Isolation or signal conditioning.
Please contact Customer Service to check availability for Model 5BDS.
Model 5BDS
The 5B Proto is a kit which includes the following:
Empty 5B Case and Case header
5B hold down screw
5B Breadboard with 0.1" centers for small circuit designs
5B Pin Header for easy mounting into a 5B backplane
Please contact Customer Service to check availability for Model 5B PROTO.
Model 5B PROTO
Power Supplies and Power Cord
Interface Board
Model AC1324 is a universal interface board with a 26-pin I/O connector and 26 I/O screw terminals.
The 26-pin connector accepts the AC1315 or CAB-01 cables from a 5B Series 5B01, 5B02, 5B08 or
5B08-MUX backplane and provides 26 screw terminals for interconnecting to any analog I/O
subsystem. This interface board might be used with programmable controllers, for example. It can
be mounted to the AC1363 rack-mount kit or in a snap track. Standoffs are included with the AC1324
and should be used if it is mounted on the back of the AC1363 rack mount kit.
Model AC1324
Order Now
Model AC1364 is a complete reference manual providing detailed information on setting up
the 5B Series subsystem
Download the 5B Series User's Manual (PDF).
Model AC1364
15,000
Problem Solvers
4,700+
Patents Worldwide
125,000
Customers
50+
Years
Analog Devices. Dedicated to solving the toughest engineering challenges.
Ahead of What's Possible
Analog Devices is a global leader in the
design and manufacturing of analog, mixed
signal, and DSP integrated circuits to help
solve the toughest engineering challenges.
See the Innovations
SOCIAL
About ADI Partners
Analog Dialogue Careers
Contact us Investor Relations
News Room Quality & Reliability
Sales & Distribution
QUICK LINKS
English
简体中文
日本語
Руccкий
LANGUAGES NEWSLETTERS
Interested in the latest news and articles about ADI
products, design tools, training and events?
Choose from one of our 12 newsletters that match
your product area of interest, delivered monthly or
quarterly to your inbox.
Sign Up
© 1995 - 2018 Analog Devices, Inc. All Rights Reserved 沪ICP备09046653号Sitemap Privacy & Security Privacy Settings Terms of use
5B Series User Manual
