Cover headline
Cover headline
MIL-DTL-38999 Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 1 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
Cannon MIL-DTL-38999 Series I, II, III Connectors
ITT Cannon connectors set the industry standard for performance and reliability in the most demanding
conditions and harshest environments. Our MIL-DTL-38999 Series I, II, III Connectors are designed to
withstand the extreme shock, exposure and vibration that are commonplace in Defense and Commercial
applications.
Our extensive track record serving military customers provides us with the experience to offer lightweight,
space-saving solutions, coupled with high bandwidth and high power for severe service application needs.
Our history, coupled with unparalleled engineering and testing resources, has established ITT Cannon as
one of the premier providers of interconnect solutions worldwide.
With a proven track record for engineering and manufacturing excellence spanning 100 years, ITT Cannon
will continue to deliver a broad range of innovative products and solutions that enable our customers to meet
their most demanding design requirements, where impeccable reliability and safety are mandatory.
Example Application Areas
Defense
– Military aircraft
– Military communication systems
– Hand held and vehicle platforms
– Military ground support systems
– Military computer systems
– Harsh environment platforms
– Blind mate applications
– High density, low signal platforms
– Hand held and vehicle platforms
– Unmanned systems
Aerospace
– Aircraft engines
– General electric testing equipment
– Commercial business aviation
– Aerospace launch vehicles
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 2 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
MIL-DTL-38999 Series: Precision Engineered, Lightweight & Rugged
ITT Cannon’s MIL-DTL-38999 Series I, II, III Connectors are designed to tackle the most extreme conditions
with exceptional versatility in the harshest environments. Small, lightweight and highly reliable, our D38999
connectors deliver consistency and performance when it matters most.
D38999 Series I (KJL)
ITT Cannon KJL series MIL-DTL-38999 series I connectors offer high-density contact
arrangements in a light-weight miniature circular connector. ITT Cannon KJL series
connectors are an industry standard for military and aerospace applications. The
environmentally sealed KJL series features quick-mating, three-point bayonet coupling
and operates across a wide temperature range.
D38999 Series II (KJ)
ITT Cannon KJ series MIL-DTL-38999 series II are a weight-reduced and low prole
circular connector ideally suited for avionic applications where space and weight are
prime considerations. It offers high-density contact arrangements in a light-weight
miniature circular connector. ITT Cannon KJ series connectors feature a quick-mating,
three-point bayonet coupling, are environmentally-sealed and operate across a wide
temperature range. ITT Cannon KJ series mil spec connectors were originally designed
for military vehicles and are now industry standard aerospace and military connectors.
MIL-DTL-38999 Series III (KJB)
The de-facto standard circular connector for use in harsh military and aerospace
environments, ITT Cannon KJB series MIL-DTL-38999 series III Connectors offer
high-density contact arrangements in a light-weight miniature circular connector.
ITT Cannon KJB series connectors have quick-mating, triple-lead threaded, self-locking
coupling, are environmentally-sealed and operate across a wide temperature range.
ITT Cannon KJB series connectors were originally designed for military vehicles and
are now industry standard aerospace and military connectors.
MIL-DTL-38999 Series III Composite (KJB)
A lightweight standard circular connector for use in military and aerospace environments
with signicant weight savings over aluminium-bodied D 38999. High density layouts
with up to 128 data connections and power contacts rated up to 23A. Features a
triple-start coupling with anti-decoupling ratchet for high vibration applications, Cadmium
and Electroless Nickel platings, 100 percent scoop-proof contacts and rated to 1500
mating cycles. Qualied to stringent MIL-DTL-38999 Series III Composite specications.
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 3 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
2
In addition to our MIL-DTL-38999 series, we also offer these connectivity solutions:
Combo D-Sub Product offering includes ability to integrate signal
and coax, high power, and high voltage.
CA-Bayonet – Signal and power connectors with exceptional
sealing against the ingress of uids and will withstand the effects
of high vibrations.
Microminiature – High performance and reliability with exceptional
versatility. Available in rectangular, circular and strip congurations,
many of our connectors meet or exceed the applicable requirements
of the MIL-DTL-83513 specication.
Specications and Test Data ..........................................................................................................................................3-5
MIL-DTL-38999 Series I ..................................................................................................................................................6-9
MIL-DTL-38999 Series II .................................................................................................................................................10-15
MIL-DTL-38999 Series III ................................................................................................................................................16-18
MIL-DTL-38999 Series III Composite ..............................................................................................................................19-20
Polarizing Positions .........................................................................................................................................................21
Contact Arrangements ....................................................................................................................................................22-23
Contacts ..........................................................................................................................................................................24-27
Torque Values / Wire Dimensions...................................................................................................................................28
Backshells .......................................................................................................................................................................29-31
Tools ................................................................................................................................................................................32
Assembly Instructions .....................................................................................................................................................33
MIL-DTL-38999 Specications .......................................................................................................................................34
Product Safety and Warranty ..........................................................................................................................................35
About ITT Cannon ...........................................................................................................................................................36
Table of Contents
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 4 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
3
MIL-DTL-38999 Series I, II, III Connectors
Corrosion and zinc resistant shells of aluminum
alloy with cadmium and zinc over nickel plating
withstand a 500 hour salt spray exposure
• Rear release crimp snap-in contacts
• High contact density
Standard MIL-C-39029 contacts, MIL-I-81969
application tools and MIL-STD 1560 insert
arrangements
• Special/custom capabilities
• 100% scoop-proof - Series I and III
• Light weight /Low Prole - Series II
Operates under severe high temperature vibration
testing through 200 C - engineered for high densi-
ty circuitry - Series III
CLOSED ENTRY
SOCKET CONTACT
DESIGN
INSULATOR
TO SHELL SEAL
GROUNDING FINGERS
(Standard on Series I connector)
INTERFACIAL
SEAL
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retentin with
inwardly deflected tines that lock
securely behind contact shoulder
INTERFACIAL
SEAL
GROUNDING FINGERS
CLOSED ENTERY
SOCKET CONTACT
DESIGN
PERIPHERAL
SEALING
GASKET
WIRE SEALING
GROMMETS
INSULATOR
TO SHELL SEAL
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
WIRE SEALING
GROMMETS
SIMPLER, STRONGER
CONTACTS
are designed to resist bending
and are crimp terminated RESILIENT PIN
INTERFACIAL SEALS
feature individual raised seal
barriers around each pin contact
PERIPHERAL SEAL
around the connector interface is
designed to minimize compression
set when connectors are mated
PERIPHERAL
SEALING
GASKET
SHELL HARDWARE
is aluminum alloy
MONOBLOC
INSERT
WIRE SEALING
GROMMET
SERIES I SERIES II SERIES III
Interfacial seal helps prevent electrolytic erosion of
contacts - Series III
Superior EMI shielding provides outstanding pro-
tection up to 65dB at 10 GHZ. - Series III
Specification Comparison
Contact Rating
Design Criteria Series I Series II
Low Pr
ofile/Light Weight
Scoop Pr
oof
Coupling System
Electr
olytic Erosion
Durability (Cycles)
High Impact Shock
Exter
nal Bending Moment
Shell Size 25
Random V
ibration "J"
Sine V
ibration
Sand, Dust, Ice
Shell Size
no
yes
Bayonet
no
500
yes
650 in/lbs
49.5G, Ambient
60G
yes
9-25
yes
no
Bayonet
no
250
no
150 in/lbs
43.7G, Ambient
8-24
Series III (Aluminum)
no
yes
Triple Start Thread
yes
500
yes
1000 in/lbs
49.5G, Ambient
60G
yes
9-25
Series III (Composite)
yes
yes
Triple Start Thread
yes
1500
yes
1000 in/lbs
49.5G, Ambient
60G
yes
9-25
Crimp Well Data
Contact
Size
22D
22M**
22**
20
16
12
* Maximum millivolt drop data is determined by measuring resistance of mated contacts from end to en
** For reference only
5
3
5
7.5
13
23
40
30
40
35
25
25
.0345 ± .0010
.0280 ± .0010
.0365 ± .0010
.0470 ± .0010
.0670 ± .0010
.1000 ± .0020
.157/.141
.157/.141
.157/.141
.229/.209
.229/.209
.229/.209
Test Current
DC Test Amperage
Maximum
Millivolt Drop*
Well
Diameter
Well
Depth
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 5 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
4
Performance and Material Specifications
Test Data
Aluminum Composite
MATERIALS AND FINISHES
Receptacle
Shell
Insulator
Contacts
Grommet and Seal
Jam Nut
Grounding Spring
*Finish as noted in How To Order sections.
28
26
24
22
20
18
16
14
12
Sea Level
50,000 ft.
70,000 ft.
100,000 ft.
1300 1300
800 550
800 350
800 200
1800 1800
1000 600
1000 400
1000 200
2300 2300
1000 800
1000 500
1000 200
1.5
2.0
3.0
5.0
-
-
-
-
-
1.5
2.0
3.0
-
-
-
-
-
-
-
2.0
3.0
5.0
-
-
-
-
-
-
-
3.0
5.0
7.5
-
-
-
-
-
-
-
-
7.5
10.0
13.0
-
-
-
-
-
-
-
-
-
17.0
23.0
Aluminum alloy
High grade plastic
Copper alloy, gold plate
Silicone base elastomer
Aluminum alloy
-
Aluminum alloy*
High grade plastic
Copper alloy, gold plate
Silicone base elastomer
-
Beryllium copper
Grounded Plug Receptacle
Thermoplastic
High grade plastic
Copper alloy, gold plate
Silicone base elastomer
-
-
Thermoplastic
High grade plastic
Copper alloy, gold plate
Silicone base elastomer
-
Beryllium copper
Grounded Plug
Contact Size and Test Amps
Wire
Size
Altitude
Service Rating M
Mated Unmated
Service Rating I
Mated Unmated
Service Rating II
Mated Unmated
22D 22M* 22* 20 16 12
ELECTRICAL DATA
Contact Size: 22D, 22M*, 22*, 20, 16 and 12
Service Rating
Test voltage, AC (rms), work voltage to be determined by application
Contact Rating and Wire Size Accomodation
1000 1000
600 400
600 260
600 200
Service Rating N
Mated Unmated
*For reference only
500 cycles of mating and unmating, 250 cycles for Series II with spring fingers
Class F: EMI leakage attenuation, greater than 90dB at 100Mhz, greater than 65dB
at 10 GHz. Shell to shell conductivity, 1.0 millivolt max. resistance.
Class W: EMI leakage attenuation, greater than 90dB at 100 MHz, greater than 50dB
at 10 GHz. Shell to shell conductivity, 2.5 millivolt max.
Class B, W, and Z will withstand 500 hours salt spray.
Class A, F, N, will withstand 48 hours salt spray.
Connectors are fluid resistant to many fuels, solvents, coolants and oils.
Mated conectors terminated with MIL-C-915 cable and environmentally sealed
backshells will withstand high impact shock per MIL-S-901. Applicable to Series
I & III only.
Designed to operate between sea level and 100,000 ft. above sea level.
Mated connectors shall withstand sand and dust per method 110 of MIL-STD-202 and
be ice resistant. Applicable to Series I & III only.
NOTE: For hermetic standard or test data please consult ITT.
Mated connectors are vibrated with weights to simulate rear accessory loads to
the following levels:
Sine Vibration:
Random Vibration:
Up to 60 G's - Series I & III (at rated temperature - Series III)
Not applicable for Series II.
43.7 Grms at rated temperature - Series III
49.5 Grms at Ambient Temperature - Series I & III
43.7 Grms at Ambient Temperature - Series II
Test Description Parameters
Durability
Temperature Range
Vibration
EMI Shielding
Effectiveness
Corrosion Resistant
Fluid Immersion
High Impact Shock
Altitude
Other Environments
Class F, N; - 65ºC (-85ºF) to + 200ºC (+392ºF) Class A; - 65ºC (-85ºF) to + 150ºC (+302ºF)
Class B,W: - 65ºC (-85ºF) to + 175ºC (+347ºF)
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 6 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
5
Insert Availability and Identification
Series
II
8-35
8-98
10-5
10-35
10-98
10-99
12-3
12-4
12-8
12-35
12-98
14-5
14-15
14-18
14-35
14-97
16-6
16-8
16-26
16-35
16-99
18-11
18-28
18-30
18-32
18-35
20-16
20-35
20-39
20-41
22-21
22-32
22-35
22-53
22-55
24-4
24-24
24-29
24-35
24-61
9-35
9-98
11-4
11-5
11-35
11-98
11-99
13-4
13-8
13-35
13-98
15-5
15-15
15-18
15-19
15-35
15-97
17-6
17-8
17-26
17-35
17-99
19-11
19-28
19-30
19-32
19-35
21-11
21-16
21-35
21-39
21-41
21-75
23-21
23-32
23-35
23-53
23-55
25-4
25-19
25-24
25-29
25-35
25-37
25-43
25-46
25-8
25-20
25-42
25-61
25-64
25-66
M
I
I
I
M
I
I
II
I
I
M
I
II
I
I
I
M
I
I
II
I
M
I
II
I
I
I
M
I
II
M
I
I
M
II
I
M
I
I
I
I
I
I
M
I
I
I, Twinax
Twinax
N, Coax, Twinax
I, Coax
I
I
I
6
3
4
5
13
6
7
3
4
8
22
10
5
15
18
19
37
12
6
8
26
55
23
11
28
30
32
66
11
16
79
39
41
4
21
32
100
53
55
56
19
24
29
128
37
43
46
8
30
42
61
64
66
6
13
22
37
55
66
79
100
128
40
53
3
4
5
6
7
8
10
14
18
19
8
26
21
26
29
32
37
41
32
53
55
48
23
40
10
38
61
8
2
3
4
5
1
4
8
2
11
2
1
16
2
21
8
12
29
37
20
4
13
10
11
6
11
19
12
4**
6
4***
2***
8***
3***
4*
Series
I & III
Service
Rating
Total
Contacts 22D 20
Contact Size
16 12 8
Coax for RG-180 cables
Coax for RG-174, -179, or -316 cables
Twinax for M17/176-00002 cables
(check factory for other cable applications)
*
**
***
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 7 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
6
How To Order
SHELL SIZE
9, 11, 13, 15, 17, 19, 21, 23, and 25
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate,
-85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
F - Electroless nickel, -85ºF to +392ºF
(-65ºC to +200ºC)
CONTACT ARRANGEMENT
See pages 22 and 23.
MS NUMBER SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MS27467 T17B 35 S
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
POLARIZING POSITION
A,B,C, and D. (No letters required for normal).
See page 21.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”
MS NUMBER SHELL STYLE
MS27466 - Wall Mounting Receptacle
MS27468 - Jam Nut Receptacle
MS27467 - Grounded Plug
MS27656 - Wall Mounting Receptacle
(back panel mounting)
MS27505 - Box Mounting Receptacle
(back panel) (Class E)
CLASS
E - Inactive for new design.
Superseded by Class T.
G - Environmental resistant Space Grade
P - Environment - resistant with straight potting
cup accessories
T - Environment - resistant with accessory threads
and teeth, except MS27505 (without rear
accessory) (Class T not applicable to MS27505)
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
KJL 6T17 B35SN
SHELL SIZE
9,11,13,15,17,19,21,23 and 25
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate,
-85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to + 175ºC)
N - Electroless nickel, -85ºF to +392ºF (-65ºC to
+200ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a nish modication code
CONTACT ARRANGEMENT
See pages 22 and 23.
CONTACT STYLE
P - Pin
S - Socket
PS - Pin-Socket (Shell style 4 only)
POLARIZING POSITION
N (normal), A, B, C, D. See page 21.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
17 - Clinch Nuts installed
4-40 Size 9-21, 6-32 Size 23-25)
27 - Outgassed, standard connector
A296 - Black Zinc Cobalt, RoHS Compliant
SERIES PREFIX
KJL - Series I-Scoop proof
SHELL STYLE
0 - Wall mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
4 - Thru bulkhead receptacle*
5 - Box mounting receptacle (back panel mount-
ing)
6 - Straight plug, grounded
7 - Jam nut receptacle
CLASS
E - Inactive for new design.
Superseded by Class T.
G - Environmental resistant - Space Grade
F - Environment - resistant with strain relief
accessory
P - Environment - resistant with straight potting
cup accessory
T - Environment - resistant (without rear
accessory) (Class T not applicable to KJL5)
*Consult factory for availability
Military Nomenclature
Cannon Nomenclature
MIL-DTL-38999 Series I Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 8 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
7
Wall Mounting Receptacle
Wall Mounting Receptacle (Back Panel)
Shell
Size
A
Dia. Max.
E
Max.
J
Dia. Max.
L
Max.
M
Max.
N
T.P.
P
Dia. Max.
T
Thread
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
H
Max.
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
J DIA.
MAX.
POLARIZING
KEYWAY
T
THREAD
E MAX.
PANEL
THICKNESS
(including mounting hardware)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
P
DIA.
M N
H
A
L
1.247
(31.67)
MAX.
9
11
13
15
17
19
21
23
25
Performance Specifications-Pa
g
es 3 and 4. Contacts, Sealin
g
Plu
g
s, Assembly Tools - Pa
g
es 24, 31, and 32. Contact Arran
g
ements - Pa
g
es 22 and 23.
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.204 (5.18)
.204 (5.18)
.193 (4.90)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
1.805 (45.85)
1.805 (45.85)
1.805 (45.85)
1.805 (45.85)
1.935 (48.90)
1.955 (49.66)
1.955 (49.66)
1.955 (49.66)
1.955 (49.66)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
MS27656
(MS service class E, P, T)
KJL3
MS27466
(MS service class E, P, T)
Shell
Size
A
Dia. Max.
H
Max.
L
Max.
M
Max.
N
T.P.
P
Dia. Max.
T
Thread
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
J
Dia. Max.
KJL0
M N
J DIA.
MAX.
POLARIZING
KEYWAY
P
DIA.
1.240
(31.50)
MAX.
L
H
A
T THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
9
11
13
15
17
19
21
23
25
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.602 (15.29)
.602 (15.29)
.602 (15.29)
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.966 (49.94)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
MIL-DTL-38999 Series I Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 9 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
8
MIL-DTL-38999 Series I Connectors
Box Mounting Receptacle (Back Panel)
Straight Plug Grounded
Shell
Size
A
Max.
J
Dia. Max.
L
Max.
(Class T)
T
Thread
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
J DIA. POLARIZING
KEYWAY T THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
G
DIA.
MAX.
A DIA.
L
9
11
13
15
17
19
21
23
25
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31 and 32.
Contact Arrangements - Pages 22 and 23.
.585 (14.86)
.717 (18.21)
.866 (22.00)
.990 (25.15)
1.115 (28.32)
1.222 (31.04)
1.347 (34.21)
1.472 (37.39)
1.597 (40.56)
.483 (12.27)
.611 (15.52)
.760 (19.30)
.885 (22.48)
1.010 (25.65)
1.115 (28.32)
1.240 (31.50)
1.365 (34.67)
1.490 (37.85)
G
Dia. Max.
.859 (21.82)
.984 (24.99)
1.156 (29.36)
1.281 (32.54)
1.406 (35.71)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.891 (48.03)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.913 (48.59)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.766 (44.86)
1.766 (44.86)
1.766 (44.86)
MS27467
(MS service class E, P, T)
KJL6
MS27505E
(MS service class E)
Shell
Size
A
Dia. Max.
H
Max.
L
Max.
M
Max.
N
T.P.
P
Dia. Max.
J
Dia. Max.
KJL5E
M N
J DIA.
MAX.
POLARIZING
KEYWAY
P
DIA.
K
MAX.
L
H
A
.060
(1.52)
MAX.
GROMMET
E MAX.
PANEL THICKNESS
(INCLUDING MOUNTING
HARDWARE)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: This connector does not accommodate backshells.
9
11
13
15
17
19
21
23
25
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
E
Max.
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.204 (5.18)
.204 (5.18)
.193 (4.90)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
K
Max.
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 10 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
9
Shell
Size
A
Dia.
P
Dia. R
Mtg.
Screw
(Class T)
9
11
13
15
17
19
21
23
25
.665 (16.89)
.812 (20.62)
.965 (24.51)
1.085 (27.55)
1.250 (31.75)
1.322 (33.57)
1.447 (36.75)
1.569 (39.85)
1.703 (43.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
#4
#4
#4
#4
#4
#4
#4
#6
#6
Flange Mounted Receptacles
Jam Nut Receptacles
P ± .005 (0.13)
4 HOLES
R
(T.P)
A
+.010 (0.25)
-.000 (0.00)
Shell
Size
9
11
13
15
17
19
21
23
25
B
B
(.00)
(.25)
.670 (17.02)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
A
(.25)
(.00)
.700 (17.78)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
A
+.010
-.000
+.000
-.010
MIL-DTL-38999 Series I Connectors
Jam Nut Receptacle
Panel Cutouts
MS27468
(MS service class E,P,T)
Shell
Size
A
Dia. Max.
H
Max.
U
Max. Hex.
V
Thread Class 2A
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
J
Dia. Max.
T
Thread
KJL7
U MAX.
HEX POLARIZING
KEYWAY
J DIA.
S
D
DIA.
A
DIA.
V THREAD
T THREAD
PANEL THICKNESS
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.125 (3.18) MAX.
.062 (1.57) MIN.
.920 (23.37) MAX.
H
9
11
13
15
17
19
21
23
25
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
11/16-24UNEF
13/16-24UNEF
1-20UNEF
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-5/8-18UNEF
1-3/4-18UNS
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.966 (49.94)
1.996 (50.70)
1.996 (50.70)
1.996 (50.70)
1.996 (50.70)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.151 (3.84)
.151 (3.84)
.151 (3.84)
.151 (3.84)
D
Max.
.655 (16.64)
.755 (19.18)
.942 (23.93)
1.066 (27.08)
1.191 (30.25)
1.316 (33.43)
1.441 (36.60)
1.566 (39.78)
1.691 (42.95)
.892 (22.66)
1.017 (25.83)
1.205 (30.61)
1.329 (33.76)
1.455 (36.96)
1.579 (40.11)
1.705 (43.31)
1.829 (46.46)
20.17 (51.23)
S
Dia. Max.
1.204 (30.58)
1.391 (35.33)
1.516 (35.51)
1.641 (41.68)
1.766 (44.86)
1.954 (49.63)
2.078 (52.78)
2.204 (55.98)
2.328 (59.13)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22, 23.
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 11 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
10
How To Order
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, 24.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, -
85ºF to + 302ºF (- 65ºC to
+ 150ºC)
B - Olive drab cadmium over electoless nickel
plate, - 85ºF to + 347ºF (- 65ºC to
+ 175ºC)
F - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
MS NUMBER SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MS27473 T 18 F 35 S
CONTACT ARRANGEMENT
See pages 22 and 23.
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
POLARIZING POSITION
A, B, C, and D (no letter required for normal).
See page 21.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less
Contacts”.
MS NUMBER SHELL STYLE
MS27472 - Wall Mounting Receptacle
MS27473 - Straight Plug
MS27474 - Jam Nut Receptacle
MS27484 - Grounded Plug
MS27497 - Wall Mounting Receptacle (back panel
mounting)
MS27513 - Box Mounting Receptacle
MS27499 - Box Mounting Receptacle (Class E)
MS27508 - Box Mounting (back panel mounting)
(Class E)
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
G - Environmental - resistant wall mount and jam
nut receptacle and plug types. Space Grade.
P - Enironment - resistant with straight potting
cup accessories
T - Environment - resistant (without rear acces-
sory). (Class T not applicable to MS27499,
MS27513, and MS27508.)
Military Nomenclature
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, and 24.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, -
85ºF to + 302ºF (- 65ºC to
+ 150ºC)
B - Olive drab cadmium over electroless nickel
plate, - 85ºF to + 347ºF (- 65ºC to + 175˚C)
N - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a nish modication code
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMNT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
Note KJ supplied with exact complement of contacts.
KJ 6 T 18 N 35 S N
CONTACT ARRANGMENT
See pages 22 and 23.
CONTACT STYLE
P - Pin
S - Socket
POLARIZING POSITION
N (normal), A, B, C, D, see page 21.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
17 - Clinch Nuts installed
(4-40 Size 9-21)
27 - Outgassed, standard connector
A296 - Black ZInc Cobalt, RoHS Compliant
SERIES PREFIX
KJ - Series II - Low Prole
SHELL STYLE
0 - Wall mounting receptacle
2 - Box mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
5 - Box mounting receptacle (back panel
mounting)
6 - Straight plug
G6 - Straight plug, grounded
7 - Jam nut receptacle
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
F - Environment - resistant with strain relief
acccessory
G - Environmental - resistant wall mount and jam
nut receptacle and plug type. Space Grade.
P - Environment - resistant with straight potting
cup accessory
R - Environment - resistant with full grommet seal
without rear accessory; shell styles 2 and 5
only
T - Environment - resistant (without rear
accessory). (Class T not applicable to KJ2E,
KJ2R, KJ5E and KJ5R.)
ITT Nomenclature
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 12 6/22/15 3:56 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
11
MS27499E
(MS service class E)
Shell
Size
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
NOTE: This connector does not accommodate backshells
M N
P DIA.
A DIA. G
DIA.
.069 (1.74) MAX.
BLUE BAND
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
L
J MAX.
POLARIZING
KEYWAY
.322 (8.17)
MAX.
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
A
Dia. Max.
G
Dia. Max.
J
Dia. Max.
L
Max.
M
Max.
N
T.P.
P
+.005 (0.13)
-.010 (0.25)
KJ2E
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Wall Mounting Receptacle
MS27472
(MS service class E,
P, T)
Shell
Size
A
Dia. Max.
J
Dia. Max.
M
Max.
N
T.P
T
Thread
E
Straight
Overall length With Backshells
F
Cable Clamp
P
Potting Max.
P
+.005 (0.13)
-.010 (0.25)
KJ0
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (39.08)
1.703 (43.26)
M N
P DIA.
A
DIA.
T THREAD
.069 (1.74) MAX.
BLUE BAND
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
J MAX.
POLARIZING
KEYWAY .322 (8.17) MAX.
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.76)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.900 (48.26)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Box Mounting Receptacle
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 13 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
12
Box Mounting Receptacle
MS27513E
(MS service class E)
KJ2R
Shell
Size
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (27.67)
1.610 (40.89)
NOTE: This connector does not accommodate backshells
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.463
(11.76)
MAX.
.322 (8.17)
MAX.
L
P DIA.
POLARIZING
KEYWAY
J MAX.
M N
.069
(1.74) MAX.
G
DIA.
A DIA.
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.85)
A
Dia. Max.
G
Dia. Max.
J
Dia. Max.
L
Max.
M
Max.
N
T.P.
P
+.005 (0.13)
-.010 (0.25)
(MS service class E)
Wall Mounting Receptacle
Shell
Size A
Dia. Max.
C
Dia. Max.
M
Max.
N
T.P
T
Thread
E
Straight
Overall Length With Backshells
F
Cable Clamp
P
Potting Max.
P
+.005 (0.13)
-.010 (0.25)
MS27497
(MS service class E,
P, T)
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.477 (11.35) MAX.
.322 (8.17) MAX. T THREAD P DIA. POLARIZING
KEYWAY
J DIA.
M N
.142 (3.01)
MAX. PANEL
THICKNESS (including mounting hardware)
.069 (1.74) MAX.
C
DIA.
A
DIA.
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
1.570 (39.88)
1.570 (39.88)
1.570 (39.88)
1.780 (45.21)
1.780 (45.21)
1.780 (45.21)
1.780 (45.21)
1.960 (49.78)
1.960 (49.78)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
J
Dia. Max.
KJ3
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 14 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
13
Box Mounting Receptacle (Back Panel)
MS27508E
(MS service class E)
Shell
Size
A
Dia. Max.
M
Max.
N
T.P
P
+.005 (0.13)
-.010 (0.25)
KJ5E
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
NOTE: This connector does not accommodate backshells
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.447 (11.35) MAX.
.322 (8.17) MAX.
L
P DIA.
POLARIZING
KEYWAY
J DIA.
M N
.069 (1.74) MAX.
G
DIA.
K MAX. PANEL THICKNESS (including mounting hardware)
C A
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
J
Dia. Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
K
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
L
Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
G
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
C
Dia. Max.
MS27508E
(MS service class E)
Shell
Size
A
Dia. Max.
M
Max.
N
T.P
P
+.005 (0.13)
-.010 (0.25)
KJ5E
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
NOTE: This connector does not accommodate backshells
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.447 (11.35) MAX.
.322 (8.17) MAX.
L
P DIA.
POLARIZING
KEYWAY
J DIA.
M N
.069 (1.74) MAX.
G
DIA.
K MAX. PANEL THICKNESS (including mounting hardware)
C A
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
J
Dia. Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
K
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
L
Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
G
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
C
Dia. Max.
Box Mounting Receptacle (Back Panel)
No MS part number KJ5R
NOTE: This connector does not accommodate backshells
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.447 (11.35) MAX.
.322 (8.17) MAX. .338
(8.58)
MAX.
L
.069 (1.74) MAX.
G
DIA.
C A
P DIA. POLARIZING
KEYWAY
J DIA.
M N
K MAX. PANEL THICKNESS (including mounting hardware)
Shell
Size
A
Dia. Max.
M
Max.
N
T.P
P
+.005 (0.13)
-.010 (0.25)
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
J
Dia. Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
K
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
L
Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
G
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
C
Dia. Max.
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
No MS part number KJ5R
NOTE: This connector does not accommodate backshells
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.447 (11.35) MAX.
.322 (8.17) MAX. .338
(8.58)
MAX.
L
.069 (1.74) MAX.
G
DIA.
C A
P DIA. POLARIZING
KEYWAY
J DIA.
M N
K MAX. PANEL THICKNESS (including mounting hardware)
Shell
Size
A
Dia. Max.
M
Max.
N
T.P
P
+.005 (0.13)
-.010 (0.25)
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
J
Dia. Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
K
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
L
Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
G
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
C
Dia. Max.
Performance Specifications-Pages A-7, A-8.
Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33.
Contact Arrangements - Pages A-24, A-25.
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 15 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
14
Straight Plug
MS27473
(MS service class E,
P, T)
Shell
Size
A
Dia. Max.
KJ6
8
10
12
14
16
18
20
22
24
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
G
Dia. Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
P
Dia. Max.
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
T
Thread
E
Straight
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
POLARIZING
KEYWAY
G DIA.
P
DIA.
A
DIA.
T THREAD
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Straight Plug Grounded
MS27484
(MS service class E, P, T)
KJG6
Shell
Size
A
Dia. Max.
8
10
12
14
16
18
20
22
24
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
G
Dia. Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
P
Dia. Max.
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
T
Thread
E
Straight
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
POLARIZING
KEYWAY
G DIA.
P
DIA.
A
DIA.
T THREAD
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly T
ools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
MS27484
(MS ser
vice class E, P, T)
KJG6
Shell
Size
A
Dia. Max.
8
10
12
14
16
18
20
22
24
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
G
Dia. Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
P
Dia. Max.
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
T
Thread
E
Straight
F
Cable Clamp
Overall Length With Backshells
P
Potting Max.
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
POLARIZING
KEYWAY
G DIA.
P
DIA.
A
DIA.
T THREAD
NOTE: For backshell dimensions and configurations, see pages A-30, A-32.
Performance Specifications-Pages A-7, A-8.
Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33.
Contact Arrangements - Pages A-24, A-25.
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 16 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
15
Jam Nut Receptacle
MS27474
(MS service class E, P, T)
Shell
Size
C
Dia. Max.
KJ7
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
D
Max.
G
Max.
J
Max.
.818 (20.78)
.942 (23.93)
1.066 (27.08)
1.191 (30.25)
1.321 (33.55)
1.441 (36.60)
1.566 (39.78)
1.691 (42.95)
1.816 (46.13)
.145 (3.68)
.145 (3.68)
.145 (3.68)
.145 (3.68)
.145 (3.68)
.145 (3.68)
.171 (4.34)
.171 (4.34)
.171 (4.34)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
P
Max.
R
Max. Hex.
S
Dia. Max.
.443 (11.25)
.443 (11.25)
.443 (11.25)
.443 (11.25)
.443 (11.25)
.443 (11.25)
.469 (11.91)
.469 (11.91)
.469 (11.91)
1.079 (27.41)
1.205 (30.61)
1.329 (33.76)
1.455 (36.96)
1.579 (40.11)
1.705 (43.31)
1.829 (46.46)
2.017 (51.23)
2.142 (54.41)
1.381 (35.08)
1.506 (38.25)
1.631 (41.43)
1.756 (44.60)
1.944 (49.38)
2.022 (51.36)
2.147 (54.53)
2.271 (57.68)
2.396 (60.86)
T
Thread
V
Thread
E
Straight
F
Cable Clamp
Overall length With Backshells
P
Potting Max.
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
1-15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-5/8-18UNEF-2A
1-3/4-18UNS-2A
1-7/8-18UNS-2A
.840 (21.34)
.840 (21.34)
.840 (21.34)
.840 (21.34)
.840 (21.34)
.840 (21.34)
.840 (21.34)
.840 (21.34)
.860 (21.84)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.900(48.26)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
V THREAD
T THREAD
BLUE BAND
(INDICATES REAR
RELEASE COTACT
RETENTION SYSTEM)
.105 (2.66) MAX.
.109 (2.77) MAX.
PANEL THICKNESS
R
S DIA.
J DIA.
D MOUNTING
FLAT
POLARIZING
KEYWAY
C
G
P
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Panel Cutouts
Flange Mounted Receptacle Jam Nut Receptacle
Shell
Size
A
Dia.
P
Dia.
Mfg.
Screw
Shell
Size
A
Dia.
B
Dia.R
8
10
12
14
16
18
20
22
24
.610 (15.49)
.734 (18.64)
.860 (21.84)
.985 (25.02)
1.110 (28.19)
1.234 (31.34)
1.360 (35.54)
1.484 (37.69)
1.611 (40.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
#4
#4
#4
#4
#4
#4
#4
#4
#6
8
10
12
14
16
18
20
22
24
.885 (22.48)
1.010 (25.65)
1.135 (28.82)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
1.885 (47.88)
.830 (21.08)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
1.835 (46.61)
P +_ .005 (0.13)
4 HOLES
+.010 (0.25)
-.000 (0.00)
+.010 (0.25)
-.000 (0.00)
+.000 (0.00)
-.010 (0.25)
B
A
R
(T.P.)
A
MIL-DTL-38999 Series II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 17 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
16
How To Order
Military Nomenclature D38999 20 F C 35 A N
CONNECTOR TYPE
SHELL STYLE
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
Military
Designation
A
9
B
11
C
13
D
15
E
17
F
19
G
21
H
23
J
25 Cannon
Designation
SHELL SIZE
SERVICE CLASS
(HARDWARE FINISH)
KJB 0 T 13 F 35 P N L
Military
Designation
9
A
11
B
13
C
15
D
17
E
19
F
21
G
23
H
25
J
Cannon
Designation
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SHELL SIZE
Cannon Nomenclature
SERIES PREFIX
KJA/KJB* - Series III - Scoop proof,
threaded coupling
SHELL STYLE
0 - Wall mount receptacle
5 - Box mount receptacle*
6 - Straight plug
7 - Jam nut receptacle
CLASS
T - Environment-resistant (without
rear accessory)
* Consult factory for availability
HARDWARE FINISH
F - Electroless nickel, - 85ºF to +392ºF
(-65ºC to +200ºC)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a nish modication code
CONTACT ARRANGEMENTS
See pages 22 and 23.
CONTACT STYLE
P -Pin contacts
S -Socket contacts
POLARIZING POSITION
N (normal) A, B, C, D, E. See page 19.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
17 - Clinch Nuts installed
(4-40 Size 9-21, 6-32 Size 23-25)
27 - Outgassed, standard connector
A296 Black Zinc Cobalt, RoHS Compliant
See page 26 for ordering PC Standoff Contacts using
modication codes.
CONNECTOR TYPE
D38999/ - MIL-DTL-38999 Series III
SHELL STYLE
D38999/20 - Wall mount receptacle
D38999/24 - Jam nut receptacle
D38999/26 - Straight Plug, Grounded
SERVICE CLASS
(Hardware Finish)
F - Electroless nickel - 85ºF to +392ºF
(-65ºC to +200ºC)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
CONTACT ARRANGEMENT
See pages 22, 23.
CONTACT STYLE
P - Pin contacts
S - Socket contact
A - Less Pin contacts*
B - Less Socket contact*
* Used only when other than power contacts are to
be installed (i,e., shielded, thermocouple, etc.)
POLARIZING POSITION
N (normal), A, B, C, D, E. See page 19.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”.
MIL-DTL-38999 Series III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 18 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
17
MIL-DTL-38999 Series III Connectors
Wall Mount Receptacle
Straight Plug Grounded
D38999/20
Shell
Size
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
+.000 (.000)
-.005 (.130)
T
+.004 (.100)
-.002 (.050)
TT
+.004 (.100)
-.002 (.050)
Z
+.005 (.130)
-.010 (.250)
Metric V
Thread
(Plated) W
Max.
S
+_.012 (.300)
R
1 R
2
R
1
R
2
KJA0/KJB0
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.438 (36.53)
1.562 (39.67)
1.688 (42.88)
1.812 (46.02)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.154 (3.91)
.216 (5.49)
.194 (4.93)
.194 (4.93)
.173 (4.39)
.194 (4.93)
.194 (4.93)
.194 (4.93)
.242 (6.15)
.242 (6.15)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.126 (3.20)
.126 (3.20)
.126 (3.20)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
Z
W
MAX.
V THREAD
M
B
THREAD
S
T
4 PLACES
.520 (13.20) MAX
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
TT 4 PLACES
RED BAND
(FULLY MATED
INDICTAOR BAND)
.230 MAX PANEL
THICKNESS (including mounting hardware)
D38999/20
Shell
Size
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
+.000 (.000)
-.005 (.130)
T
+.004 (.100)
-.002 (.050)
TT
+.004 (.100)
-.002 (.050)
Z
+.005 (.130)
-.010 (.250)
Metric V
Thread
(Plated) W
Max.
S
+_.012 (.300)
R
1 R
2
R
1
R
2
KJA0/KJB0
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.438 (36.53)
1.562 (39.67)
1.688 (42.88)
1.812 (46.02)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.154 (3.91)
.216 (5.49)
.194 (4.93)
.194 (4.93)
.173 (4.39)
.194 (4.93)
.194 (4.93)
.194 (4.93)
.242 (6.15)
.242 (6.15)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.098 (2.50)
.126 (3.20)
.126 (3.20)
.126 (3.20)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
1.235 (31.36)
Z
W
MAX.
V THREAD
M
B
THREAD
S
T
4 PLACES
.520 (13.20) MAX
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
TT 4 PLACES
RED BAND
(FULLY MATED
INDICTAOR BAND)
.230 MAX PANEL
THICKNESS (including mounting hardware)
KJA6/KJB6
D38999/26
Shell
Size
MS
Shell size
Code
B
+.008 (.200)
-.000 (.000)
W
+.008 (.200)
-.004 (.100)
D Thread
Class 2B
(Plated)
K
Max.
L
Max.
Q
Dia Max.
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.724 (18.40)
.831 (21.10)
1.000 (25.40)
1.130 (28.70)
1.268 (32.20)
1.374 (34.90)
1.500 (38.10)
1.618 (41.40)
1.744 (44.30)
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
Q
D THREAD
W
L
B
V THREAD
.185 (4.70) +_ .016 (0.40)
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEMS
K
.244 (6.20)+.012 (0.30)
-.000 (0.00)
.748 (19.00)
.862 (21.90)
1.027 (26.10)
1.153 (29.30)
1.291 (32.80)
1.398 (35.50)
1.524 (38.70)
1.642 (41.70)
1.768 (44.90)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
.859 (21.82)
.969 (24.61)
1.141 (28.98)
1.266 (32.16)
1.391 (35.53)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
1.875 (47.62)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
Metric V
Thread
(Plated)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 19 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
18
Jam Nut Receptacle
Panel Cutouts
D38999/24
Shell
Size
MS
Shell size
Code
M
+.005 (.130)
-.004 (.100)
P
+.016 (.410)
-.004 (.100)
Metric R
Thread
(Plated)
S
Z
+.005 (.130)
-.040 (.100)
C
+.004 (.100)
-.010 (.250)
A
+.010 (.250)
-.005 (.130)
B Thread
Class 2A
(Plated)
Metric V
Thread
(Plated)
KJA7/KJB7
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.135 (3.43)
.135 (3.43)
.135 (3.43)
.135 (3.43)
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.651 (16.53)
.751 (19.07)
.938 (23.82)
1.062 (26.97)
1.187 (30.15)
1.312 (33.32)
1.437 (36.50)
1.562 (39.67)
1.687 (42.85)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
.871 (22.12)
.871 (22.12)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.555 (14.10)
.555 (14.10)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
1.062 (26.97)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
1.625 (41.28)
1.812 (46.02)
1.938 (49.23)
2.062 (52.37)
2.188 (55.38)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
M17X1-6g0.100R
M20X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M32X1-6g0.100R
M35X1-6g0.100R
M38X1-6g0.100R
M41X1-6g0.100R
M44X1-6g0.100R
V THREAD
R THREAD
.520 (13.2) MAX. .062 (1.57) MIN./.125 (3.18) MAX.
PANEL THICKNESS
S
Z
A
M
P
B
THREAD
SC
FLAT
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
RED BAND
(FULLY MATED
INDICATOR BAND)
Performance Specifications-Pages A-7, A-8.
Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33.
Contact Arrangements - Pages A-24, A-25.
D38999/24
Shell
Size
MS
Shell size
Code
M
+.005 (.130)
-.004 (.100)
P
+.016 (.410)
-.004 (.100)
Metric R
Thread
(Plated)
S
Z
+.005 (.130)
-.040 (.100)
C
+.004 (.100)
-.010 (.250)
A
+.010 (.250)
-.005 (.130)
B Thread
Class 2A
(Plated)
Metric V
Thread
(Plated)
KJA7/KJB7
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.135 (3.43)
.135 (3.43)
.135 (3.43)
.135 (3.43)
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.651 (16.53)
.751 (19.07)
.938 (23.82)
1.062 (26.97)
1.187 (30.15)
1.312 (33.32)
1.437 (36.50)
1.562 (39.67)
1.687 (42.85)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
.871 (22.12)
.871 (22.12)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.555 (14.10)
.555 (14.10)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
1.062 (26.97)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
1.625 (41.28)
1.812 (46.02)
1.938 (49.23)
2.062 (52.37)
2.188 (55.38)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
M17X1-6g0.100R
M20X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M32X1-6g0.100R
M35X1-6g0.100R
M38X1-6g0.100R
M41X1-6g0.100R
M44X1-6g0.100R
V THREAD
R THREAD
.520 (13.2) MAX. .062 (1.57) MIN./.125 (3.18) MAX.
PANEL THICKNESS
S
Z
A
M
P
B
THREAD
SC
FLAT
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
RED BAND
(FULLY MATED
INDICATOR BAND)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Wall Mounted Receptacle
Jam Nut Receptacle
Shell
Size
R
(TP)
ØT
±.050 (.13)
9
11
13
15
17
19
21
23
25
.516 (13.11)
.625 (15.88)
.750 (19.05)
.906 (23.01)
1.016 (25.81)
1.141 (28.98)
1.266 (36.16)
1.375 (34.92)
1.484 (37.69)
.656 (16.66)
.796 (20.22)
.922 (23.42)
1.047 (26.59)
1.219 (30.96)
1.297 (32.94)
1.422 (36.12)
1.547 (39.29)
1.672 (42.47)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (391)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
B
+.000 (.00)*
-.010 (.25)
.657 (16.70)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
A
+.010 (.25)
-.000 (.00)
.693 (17.6)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
* For Dimension B, Shell Size 9 only, tolerance is ±.004 (.10)
B
A
ØH1
(Min.)
ØH2
(Min.)
MIL-DTL-38999 Series III Connectors
Wall Mounted Receptacle
Jam Nut Receptacle
Shell
Size
R
(TP)
ØT
±.050 (.13)
9
11
13
15
17
19
21
23
25
.516 (13.11)
.625 (15.88)
.750 (19.05)
.906 (23.01)
1.016 (25.81)
1.141 (28.98)
1.266 (36.16)
1.375 (34.92)
1.484 (37.69)
.656 (16.66)
.796 (20.22)
.922 (23.42)
1.047 (26.59)
1.219 (30.96)
1.297 (32.94)
1.422 (36.12)
1.547 (39.29)
1.672 (42.47)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (391)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
B
+.000 (.00)*
-.010 (.25)
.657 (16.70)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
A
+.010 (.25)
-.000 (.00)
.693 (17.6)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
* For Dimension B, Shell Size 9 only, tolerance is ±.004 (.10)
B
A
ØH1
(Min.)
ØH2
(Min.)
Wall Mounted Receptacle Jam Nut Receptacle
Shell
Size
R
(TP)
ØT
±.050 (.13)
9
11
13
15
17
19
21
23
25
.516 (13.11)
.625 (15.88)
.750 (19.05)
.906 (23.01)
1.016 (25.81)
1.141 (28.98)
1.266 (36.16)
1.375 (34.92)
1.484 (37.69)
.656 (16.66)
.796 (20.22)
.922 (23.42)
1.047 (26.59)
1.219 (30.96)
1.297 (32.94)
1.422 (36.12)
1.547 (39.29)
1.672 (42.47)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (391)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
B
+.000 (.00)*
-.010 (.25)
.657 (16.70)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
A
+.010 (.25)
-.000 (.00)
.693 (17.6)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
* For Dimension B, Shell Size 9 only, tolerance is ±.004 (.10)
B
A
ØH1
(Min.)
ØH2
(Min.)
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 20 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
Military Nomenclature D38999 20 M
C 35
A
N
CONNECTOR TYPE
SHELL STYLE
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
Military
Designation
A
9
B
11
C
13
D
15
E
17
F
19
G
21
H
23
J
25 Cannon
Designation
SHELL SIZE
SERVICE CLASS
(HARDWARE FINISH)
19
How To Order
SERIES PREFIX
KJB* - Series III - Scoop proof,
threaded coupling
SHELL STYLE
0 - Wall mount receptacle
6 - Straight plug
CLASS
T - Environment-resistant (without
rear accessory)
* Consult factory for availability
HARDWARE FINISH
J - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
M - Electroless nickel, - 85ºF to +392ºF
(-65ºC to +200ºC), RoHS Compliant
CONTACT ARRANGEMENTS
See pages 22 and 23.
CONTACT STYLE
H - Pin conatcts (1500 cycle)
J - Socket contacts (1500 cycle)
P - Pin contacts
S - Socket contacts
POLARIZING POSITION
N (normal) A, B, C, D, E. See page 21.
MODIFICATION CODE
L - Less contacts, not stamped on connector
CONNECTOR TYPE
D38999/ - MIL-DTL-38999 Series III
SHELL STYLE
D38999/20 - Wall mount receptacle
D38999/26 - Straight Plug, Grounded
SERVICE CLASS
(Hardware Finish)
J - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
M - Electroless nickel - 85ºF to +392ºF
(-65ºC to +200ºC), RoHS Compliant
CONTACT ARRANGEMENT
See pages 22, 23.
CONTACT STYLE
H - Pin conatcts (1500 cycle)
J - Socket contacts (1500 cycle)
P - Pin conatcts
S - Socket contact
A - Less Pin contacts*
B - Less Socket contact*
* Used only when other than power contacts are to
be installed (i,e., shielded, thermocouple, etc.)
POLARIZING POSITION
N (normal), A, B, C, D, E. See page 21.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”.
MIL-DTL-38999 Series III Composite Connectors
KJB 0 T 13
M
35 P N L
Military
Designation
9
A
11
B
13
C
15
D
17
E
19
F
21
G
23
H
25
J
Cannon
Designation
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SHELL SIZE
Cannon Nomenclature
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 21 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
20
MIL-DTL-38999 Series III Composite Connectors
Wall Mount Receptacle
Straight Plug Grounded
D38999/20
Shell
Size
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
+.000 (.000)
-.005 (.130)
T
+.004 (.100)
-.002 (.050)
TT
+.004 (.100)
-.002 (.050)
Z
+.005 (.130)
-.010 (.250)
Metric V
Thread
(Plated) W
Max.
S
+_.012 (.300)
R
1 R
2
R
1
R
2
KJB0T
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.768 (19.50)
.768 (19.50)
.768 (19.50)
.768 (19.50)
.768 (19.50)
.768 (19.50)
.736 (18.70)
.736 (18.70)
.736 (18.70)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.438 (36.53)
1.562 (39.67)
1.688 (42.88)
1.812 (46.02)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.154 (3.91)
.216 (5.49)
.194 (4.93)
.194 (4.93)
.173 (4.39)
.194 (4.93)
.194 (4.93)
.194 (4.93)
.242 (6.15)
.242 (6.15)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
.143 (3.63)
.143 (3.63)
.143 (3.63)
.143 (3.63)
.143 (3.63)
.143 (3.63)
.171 (4.35)
.171 (4.35)
.171 (4.35)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
1.255 (32.00)
Z
W
MAX.
V THREAD
M
B
THREAD
S
T
4 PLACES
.520 (13.20) MAX
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
TT 4 PLACES
RED BAND
(FULLY MATED
INDICTAOR BAND)
.230 MAX PANEL
THICKNESS (including mounting hardware)
KJB6T
D38999/26
Shell
Size
9
11
13
15
17
19
21
23
25
MS
Shell size
Code
A
B
C
D
E
F
G
H
J
B
+.008 (.200)
-.000 (.000)
.811 (20.6)
.929 (23.6)
1.11 (28.2)
1.23 (31.3)
1.35 (34.5)
1.46 (37.3)
1.59 (40.5)
1.72 (43.7)
1.84 (46.8)
L
Max.
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
Q
Dia Max.
.858 (21.8)
.984 (25.0)
1.157 (29.4)
1.27 (32.5)
1.40 (35.7)
1.51 (38.5)
1.64 (41.7)
1.76 (44.9)
1.88 (48.0)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Q
L
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEMS
D THREAD
B
V THREAD
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 22 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
21
MIL-DTL-38999 Series I, II, III Connectors
C
D
N
A
C
D
NB
A
B
Polarizing Positions
Key Locations
9
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
105
102
80
35
64
91
95
113
90
53
119
51
80
135
49
66
62
79
80
135
49
66
62
79
140
132
118
140
155
131
141
156
145
156
146
141
142
170
169
140
145
153
142
170
169
140
145
153
215
248
230
205
234
197
208
182
195
220
176
184
196
200
200
200
180
197
196
200
200
200
180
197
265
320
312
275
304
240
236
292
252
255
298
242
293
310
244
257
280
272
293
310
244
257
280
272
11
13
and
15
17
and
19
21
23
and
25
MAIN
KEYWAY
MAIN
KEY
AR˚
BSC
BR˚
BSC
CR˚
BSC
AP˚
BSC
BP˚
BSC
CP˚
BSC
DP˚
BSC
DR˚
BSC
NOTES
1. All Angles are BSC
2. The insert arrangement does not rotate with
main key/keyway
3. All minor keys are rotated to provide shell
polarization, the master key remains xed at
twelve o’clock position.
4. Polarization is different from
Series I and II.
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polar-
ization; the minor keys remain xed.
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polar-
ization; the minor keys remain xed.
PLUG
(Front face shown)
RECEPTACLE
(Front face shown)
Series III
Series II
Series I
Shell
Size
Key &
Keyway
Arrangement
identifi-
cation
Letter
ARº
or
APº
BSC
BRº
or
BPº
BSC
CRº
or
CPº
BSC
DRº
or
DPº
BSC
Shell
Size Normal A B C D
Shell Size Normal A B C
D
Angle of Rotation (Degrees)
Angle of Rotation (Degrees)
10º
REF
REF
9
11
13
15
17
19
21
23
25
95º
95º
95º
95º
95º
95º
95º
95º
95º
77º
81º
75º
74º
77º
77º
77º
80º
80º
67º
63º
61º
65º
65º
65º
69º
69º
123º
127º
129º
125º
125º
125º
121º
121º
113º
109º
115º
116º
113º
113º
113º
110º
110º
8
10
12
14
16
18
20
22
24
100º
100º
100º
100º
100º
100º
100º
100º
100º
82º
86º
80º
79º
82º
82º
82º
85º
85º
72º
68º
66º
70º
70º
70º
74º
74º
128º
132º
134º
130º
130º
130º
126º
126º
118º
114º
120º
121º
118º
118º
118º
115º
115º
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 23 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
22
Contact Arrangements (Engaging View Pin Insert)
* Socket insert only
** Pin insert only (Not available in socket insert Series I and III)
Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
† Consult factory MS27505E/KJL5E insert availability
Series III
Series II
Series
I
No. of Contacts
Service Ratings
9-98
8-98†
9-98
3 #20
I
9-35
8-35†
9-35
6 #22D
M
-
-
11-4
4 #20
I
11-5
10-5†
11-5
5 #20
I
11-98
10-98†
11-98
6 #20
I
-
10-99†
11-99
7 #20
I
11-35
10-35†
11-35
13 #22D
M
-
12-3
-
3 #16
II
-
12-4†
13-4**
4 #16
I
13-8
12-8†
13-8
8 #20
I
15-35
14-35†
15-35
37 #22D
M
15-19
-
15-19
19 #20
I
15-18
14-18†
15-18
18 #20
I
15-15
14-15†
15-15
14 #20,1 #16
I
15-5
14-5†
15-5
5 #16
II
13-35
12-35†
13-35
22 #22D
M
13-98
12-98†
13-98
10 #20
I
15-97
14-97†
15-97
8 #20,4 #16
I
17-6
16-6
17-6
6 #12
I
17-8
16-8†
17-8
8 #16
II
17-26
16-26†
17-26
26 #20
I
17-35
16-35†
17-35
55 #22D
M
-
16-99†
17-99**
21 #20,2 #16
I
19-35
18-35†
19-35
66 #22D
M
19-32
18-32†
19-32
32 #20
I
19-11
18-11
19-11
11 #16
II
-
18-30
19-30**
29 #20, 1 #16
I
-
18-28
19-28**
26 #20,2 #16
I
21-11
-
21-11
11 #12
I
21-16
20-16†
21-16
16 #16
II
21-35
20-35†
21-35
79 #22D
M
21-39
20-39†
21-39
37 #20,2 #16
I
21-41
20-41†
21-41
41- #20
I
23-35
22-35†
23-35
100 #22D
M
-
22-32
23-32**
32 #20
I
23-21
22-21
23-21
21 #16
II
21-75
-
21-75*
4 #8 Twinax
M
Series III
Series II
Series
I
No. of Contacts
Service Ratings
Series III
Series II
Series
I
No. of Contacts
Service Ratings
Series III
Series II
Series
I
No. of Contacts
Service Ratings
Series III
Series II
Series
I
No. of Contacts
Service Ratings
Series III
Series II
Series
I
No. of Contacts
Service Ratings
_
16-42†
_
42 #22
M
42
31
21
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 24 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
23
MIL-DTL-38999 Series I, II, III Connectors
Contact Arrangements (Engaging View Pin Insert)
* Socket insert only
** Pin insert only (Not available in socket insert Series I and III
Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
• Consult factory for MS27505E/KJL5E insert availability
II
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 25 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
24
Contacts-Pin (Series I/II/III)
Contact
Size
Cannon
Part Number
AS39029
Military
Part Number
Color
Bands
2
13
MIL-C-39029/58
1st BAND (WIDE)
2nd BAND (NARROW)
3rd BAND (NARROW) 22D
20
16
12
Orange
Orange
Orange
Orange
Blue
Blue
Blue
Blue
Black
Orange
Yellow
Green
980-0008-878
980-0008-879
980-0008-880
980-0008-881
AS39029/58-360
AS39029/58-363
AS39029/58-364
AS39029/58-365
Contact
Size
8 Coax
8 Twinax
12 Coax
Cannon
Part Number
Cable
Accomodations
249-2196-000
249-2196-001
249-2196-002
980-1000-012
980-1000-016
RG-180
RG-174, 179, 316
RG-142
M17/176-00002
RG-174, 179, 316
MIL-C-39029/107
H Contacts (1500 Cycle)
Contact
Size
Cannon
Part Number
AS39029
Military
Part Number
Color
Bands
2
13
22D
20
16
12
Blue
Blue
Blue
Blue
Red
Red
Red
Red
Black
Brown
Red
Orange
980-0010-032
980-0010-033
980-0010-034
980-0010-035
AS39029/107-620
AS39029/107-621
AS39029/107-622
AS39029/107-623
Contacts-Socket (Series II)
Manufacture identification
Code Area - Typical all contacts
MIL-C-39029/57 KJ
Contact
Size
Cannon
Part Number
AS39029
Military
Part Number
Color
Bands
2
13
22D
20
16
12
Orange
Orange
Orange
Orange
Green
Green
Green
Green
Yellow
Violet
Gray
White
980-0008-874
980-0008-875
980-0008-876
980-0008-877
AS39029/57-354
AS39029/57-357
AS39029/57-358
AS39029/57-359
Contacts-Socket (Series I & III)
95 Ohms
75 Ohms
1st BAND (WIDE)
2nd BAND (NARROW)
3rd BAND (NARROW)
MIL-C-39029/56
MIL-C-39029/106
J Contacts (1500 Cycle)
Contact
Size
Cannon
Part Number
AS39029
Military
Part Number
Color
Bands
2
13
22D
20
16
12
Orange
Orange
Orange
Orange
Yellow
Green
Green
Green
Gray
Brown
Red
Orange
980-0008-870
980-0008-871
980-0008-872
980-0008-873
AS39029/56-348
AS39029/56-351
AS39029/56-352
AS39029/56-353
Contact
Size
Cannon
Part Number
AS39029
Military
Part Number
Color
Bands
2
13
22D
20
16
12
Blue
Blue
Blue
Blue
Brown
Brown
Brown
Brown
Yellow
Green
Blue
Violet
980-0008-993
980-0008-994
980-0008-995
980-0008-996
AS39029/106-614
AS39029/106-615
AS39029/106-616
AS39029/106-617
Contact
Size
8 Coax
8 Twinax
12 Coax
Cannon
Part Number
Cable
Accomodations
249-2195-000
249-2195-001
249-2195-002
980-1000-013
980-1000-015
RG-180
RG-174, 179, 316
RG-142
M17/176-00002
RG-174, 179, 316
95 Ohms
75 Ohms
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 26 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
25
PIN PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
TAIL DIA.
±.001
0.020
0.020
0.020
0.020
0.025
0.025
0.019
0.062
0.062
MS27466
MS27467
KJL0
0.261
0.189
0.069
N/A
0.216
0.144
0.293
0.221
0.166
0.094
0.281
0.209
0.364
0.292
0.278
0.206
0.118
0.046
MS27656
MS27468
KJL3 / KJL7
0.244
0.176
0.052
N/A
0.199
0.131
0.276
0.208
0.149
0.081
0.264
0.196
0.347
0.279
0.261
0.193
0.101
0.033
MS27505E
KJL5E
0.408
0.376
0.216
0.184
0.363
0.331
0.440
0.408
0.313
0.281
0.428*
0.396*
0.511
0.479
0.425
0.393
0.265
0.233
MS27472
MS27474
KJ0 / KJ7
0.264
0.226
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
0.121
0.083
MS27499E
MS27508E
KJ2E / KJ5E
0.408
0.376
0.216
0.184
0.363
0.331
0.440
0.408
0.313
0.281
0.428*
0.396*
0.511
0.479
0.425
0.393
0.265
0.233
MS27513E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
0.264
0.226
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
0.121
0.083
D38999/20
KJB0
KJA0
0.262
0.200
0.070
0.008
0.217
0.155
0.294
0.232
0.167
0.105
0.282
0.220
0.365
0.303
0.279
0.217
0.119
0.057
D38999/24
KJA7 (9-17)
0.280
0.216
0.088
0.024
0.235
0.171
0.312
0.248
0.185
0.121
0.300
0.236
0.383
0.319
0.297
0.233
0.137
0.073
D38999/24
KJA7 (19-25)
0.258
0.198
0.066
0.006
0.213
0.153
0.290
0.230
0.163
0.103
0.278
0.218
0.361
0.301
0.275
0.215
0.115
0.055
PC CONTACT
EXTENSION
G (SEE NOTE 5)
(KJL5E & KJ0/2E/2R/3/5E/5R/7)
(KJL0/3/7 & KJA0/7)
22D
22D
22D
22D
20
20
20
16
16
CONTACT
SIZE
030-2097-002
030-2097-006
030-2097-008
030-2097-015
030-1997-006
030-1997-022
030-1997-030
030-1995-023
030-1995-024
PC CONTACT
PART NUMBER
PC CONTACT
EXTENSION
SOCKET (SERIES II) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
TAIL DIA.
±.001
0.020
0.020
0.020
0.020
0.025
0.062
MS27472
MS27474
KJ0 / KJ7
0.179
0.141
0.109
0.071
0.217
0.179
0.262
0.224
0.247
0.209
0.101
0.063
MS27499E
MS27508E
KJ2E / KJ5E
0.323
0.291
0.253
0.221
0.361
0.329
0.406
0.374
0.391*
0.359*
0.245
0.213
MS27513E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
0.179
0.141
0.109
0.071
0.217
0.179
0.262
0.224
0.247
0.209
0.101
0.063
SOCKET (SERIE I & III) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
TAIL DIA.
±.001
0.020
0.020
0.020
0.025
0.029
MS27466
MS27467
KJL0
0.244
0.172
0.168
0.096
0.438
0.366
0.486
0.414
0.272
0.200
MS27656
MS27468
KJL3 / KJL7
0.227
0.159
0.151
0.083
0.421
0.353
0.469
0.401
0.255
0.187
MS27505E
KJL5E
0.391*
0.359*
0.315*
0.283*
0.585*
0.553*
0.633
0.601
0.419
0.387
D38999/20
KJB0
KJA0
0.245
0.183
0.169
0.107
0.439
0.377
0.487
0.425
0.273
0.211
D38999/24
KJA7 (9-17)
0.263
0.199
0.187
0.123
0.457
0.393
0.505
0.441
0.291
0.227
D38999/24
KJA7 (19-25)
0.241
0.181
0.165
0.105
0.435
0.375
0.483
0.423
0.269
0.209
NOTES: UNLESS OTHERWISE SPECIFIED.
1. PC CONTACTS HAVE GOLD PLATING OVER SUITABLE UNDERPLATE PER MIL-C-39029 SPECIFICATION.
2. PC CONTACT EXTENSIONS APPLY TO ITT CANNON CONNECTORS ONLY FOR ALL SHELL SIZES.
3. N/A INDICATES NO EXTENSION.
22D
22D
22D
22D
20
16
CONTACT
SIZE
031-1186-006
031-1186-011
031-1186-013
031-1186-021
031-1124-021
031-1123-007
PC CONTACT
PART NUMBER
22D
22D
22D
20
16
CONTACT
SIZE
031-1147-014
031-1147-039
031-1147-040
031-1124-040
031-1123-020
PC CONTACT
PART NUMBER
4. * INDICATES PC TA IL WITH STEP EXTENDING FROM REAR OF CONNECTOR.
5. G DIM. IS .031 +/- .016 FOR KJL5E AND .120 +/- .030 (SHELL SIZES 8 THRU 22)
AND .090 +/- .050 (SHELL SIZE 24) FOR KJ0/2E/2R/3/5E/5R/7.
6. FOR OTHER SPECIFIC PC CONTACT DATA, CONSULT ITT EC, SANTA ANA, CA, USA.
Contacts-Printed Circuit Board
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 27 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
26
KJB Wall Mount with
PC Standoff Contacts installed
HOW TO ORDER
38999 Series III Modification Codes: PC Standoff Contacts installed
MIL-DTL-38999 Series III Connectors
Modification
Code Definition
100
101
102
103
104
105
Untinned PC contacts with extensions E & E1
Lead tinned PC contacts with extensions E & E1
Lead-free tinned PC contacts with extensions E & E1
Untinned PC contacts with extensions E & E2
Lead tinned PC contacts with extensions E & E2
Lead-free tinned PC contacts with extensions E & E2
Contact
Style Dimension
P
S
KJB7T (Jam Nut)
9 to 25
.392 / .436 (9.96 / 11.07)
.611 / .671 (15.52 / 17.04)
.749 / .809 (19.02 / 20.54)
.392 / .436 (9.96 / 11.07)
.611 / .671 (15.52 / 17.04)
.749 / .809 (19.02 / 20.54)
KJB0T (Wall Mount)
9 to 19
.459 / .503 (11.66 / 12.78)
.687 / .738 (17.22 / 18.75)
.816 / .876 (20.72 / 22.25)
.459 / .503 (11.66 / 12.78)
.687 / .738 (17.22 / 18.75)
.816 / .876 (20.72 / 22.25)
KJB0T (Wall Mount)
21 to 25
.489 / .533 (12.42 / 13.54)
.708 / .768 (17.98 / 19.51)
.846 / .906 (21.48 / 23.01)
.489 / .533 (12.42 / 13.54)
.708 / .768 (17.98 / 19.51)
.846 / .906 (21.48 / 23.01
E
E1
E2
E
E1
E2
Contact
Size ØA Max.
22D
20
16
ØB Min.
.044 (1.12)
.052 (1.32)
.084 (2.13)
.028 (.71)
.036 (.91)
.068 (1.73)
E1/E2
E1/E2 UNTINNED, LEAD TINNED
OR LEAD-FREE TINNED
MAXIMUM AREA
UNTINNED, LEAD TINNED
OR LEAD-FREE TINNED
MAXIMUM AREA
B
PANEL REF.
PANEL REF.
A
B
A
E
E
KJB0 WALL MOUNT KJB7 JAM NUT
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 28 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
27
MIL-DTL-38999 Series I, II, III Connectors
Size 8 Twinax Sealing Bushing
321-1035-000
Used with the Twinax contact in Twinax layouts for sealing cable size M17/176-00002
Size 8 Coax Sealing Bushing 321-1034-001
Used with the Coax contact in Twinax layouts for sealing cable size RG-180
(Bushing only used with Twinax grommet)
Contact Sealing Bushings
Contact Sealing Bushing Sequence into Twinax Grommet
Twinax Grommet Coax Grommet
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 29 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
28
Wire Sizes and Diameters
Contact
Size
Wire
size (AWG) Minimum Maximum
Finished wire outside dimensions
22D
22M*
22*
20
16
12
8 Coax
8 Twinax
12 Coax
28, 26, 24, 22
28, 26, 24
26, 24, 22
24, 22, 20
20, 18, 16
14, 12
RG-180
M17/176-00002
RG174, 179, 316
0.030
0.030
0.034
0.040
0.065
0.097
0.136
0.124
0.094
0.054
0.050
0.060
0.083
0.109
0.142
0.146
0.134
0.102
*For reference only
Recommended Jam Nut Torque Values
Shell
Size
Inch-
Pounds
Shell
Size
Inch-
Pounds
8
10
12
14
16
18
20
22
24
46/50
55/60
70/75
80/85
90/95
100/110
110/120
120/130
140/150
30/36
40/46
55/60
70/75
80/85
90/95
100/110
110/120
120/130
9
11
13
15
17
19
21
23
25
Series II Series I & III
Coupling Nut Torque Values (Series I, II and III)
Shell
Size
Inch
Pound
Inch
Pound
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Maximum engagement and
disengagement
8
8
12
12
16
16
20
20
24
24
28
28
32
32
36
36
36
40
Minimum
disengagement
2
2
2
2
2
2
4
3
4
3
5
3
6
5
7
5
7
5
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 30 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
29
Backshell - Type E (Straight), Series II only
Backshell - Type F (Cable Clamp)
How
To Order
Shell Size
Series II
Shell Size AB
CN
Series
II
Cadmium/Nickel-Clear
Part Number
Cadmium/Nickel-O.D
Part Number
Anodic Non-Cond.
Part Number
Electroless Nickel
Part Number
Finishes
B
A
DIA.
A Dia. Max. B Dia. Max.
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
057-0776-000
057-0777-000
057-0778-000
057-0779-000
057-0780-000
057-0781-000
057-0782-000
057-0783-000
057-0784-000
057-0862-000
057-0863-000
057-0864-000
057-0846-000
057-0847-000
057-0848-000
057-0849-000
057-0850-000
057-0851-000
057-0819-000
057-0820-000
057-0821-000
057-0822-000
057-0823-000
057-0824-000
057-0825-000
057-0826-000
057-0827-000
057-0776-002
057-0777-002
057-0778-002
057-0779-002
057-0780-002
057-0781-002
057-0782-002
057-0783-002
057-0784-002
.580 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.32)
1.205 (30.61)
.330 (33.78)
1.455 (36.96)
1.555 (39.50)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.270 (6.86)
How To Order (MS Version)
MS27506
Military Designation
MS27506 Type F Straight
with Cable Clamp
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20, 22, 24
Geometry - 2
Finish
Shell Size
A
dapter
-A8 2--
Shell Size
Series
I
Series
II
Shell Size
Series
I
Series
II
MS
Part Number
Cannon
Part Number
A
Cannon Cannon Cannon MS MS MS
B N F
Finishes
A Max. N Dia. Max. X Dia. Min. Y Max. X Dia. Min.
1
A
DIA. N
1
X
X Y
9
11
13
15
17
19
21
23
25
8
10
12
14
16
18
20
22
24
9
11
13
15
17
19
21
23
25
* MS Finish *** Cannon Finish
8
10
12
14
16
18
20
22
24
27506-*8-2
27506-*10-2
27506-*12-2
27506-*14-2
27506-*16-2
27506-*18-2
27506-*20-2
27506-*22-2
27506-*24-2
057-3005-***
057-3006-***
057-3007-***
057-3008-***
057-3009-***
057-3010-***
057-3011-***
057-3012-***
057-3013-***
-012
-011
-012
-010
-012
-013
-011
-015
-013
-013
-012
-013
-011
-013
-014
-013
-016
-014
-015
-014
-015
-013
-015
-016
-015
-018
-017
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
F
F
F
F
F
F
F
F
F
.508 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.43)
1.205 (30.61)
1.330 (33.78)
1.455 (36.96)
1.555 (39.50)
.135 (3.43)
.198 (5.03)
.322 (7.18)
.385 (9.78)
.510 (12.95)
.635 (16.13)
.635 (16.13)
.760 (19.30)
.810 (20.57)
.234 (5.94)
.297 (7.54)
.422 (10.72)
.547 (12.89)
.609 (15.47)
.734 (18.64)
.734 (18.64)
.922 (23.42)
.984 (24.99)
.187 (4.75)
.187 (4.75)
.281 (7.14)
.325 (8.26)
.356 (9.04)
.456 (11.58)
.519 (13.18)
.519 (13.18)
.657 (16.69)
.829 (21.06)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
Z.
.813 (20.65)
.813 (20.65)
.813 (20.65)
.813 (20.65)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.893 (22.68)
Z Max.
MIL-DTL-38999 Series I, II Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 31 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
30
Backshell Series III
M85049/ 38 S 9 W
Military Designator
Type
Straight Cable Clamp 38
90° with Cable Clamp 39
Conguration
Self Locking S
Nonself Locking*
*For Nonself locking, leave designator blank
Shell Size Series III
9, 11, 13, 15, 17, 19, 21, 23, 25
Finish
Electroless Nickel N
OD Cadmium
over electroless nickel W
MIL-DTL-38999 Series III Connectors
Shell Size
Series III
Military
Part Number
Nickel
Military
Part Number
OD Cadmium
9
11
13
15
17
19
21
23
25
M85049/38-9N
M85049/38-11N
M85049/38-13N
M85049/38-15N
M85049/38-17N
M85049/38-19N
M85049/38-21N
M85049/38-23N
M85049/38-25N
M85049/38-9W
M85049/38-11W
M85049/38-13W
M85049/38-15W
M85049/38-17W
M85049/38-19W
M85049/38-21W
M85049/38-23W
M85049/38-25W
Shell Size
Series III
Military
Part Number
Nickel
Military
Part Number
OD Cadmium
9
11
13
15
17
19
21
23
25
M85049/38S-9N
M85049/38S-11N
M85049/38S-13N
M85049/38S-15N
M85049/38S-17N
M85049/38S-19N
M85049/38S-21N
M85049/38S-23N
M85049/38S-25N
M85049/38S-9W
M85049/38S-11W
M85049/38S-13W
M85049/38S-15W
M85049/38S-17W
M85049/38S-19W
M85049/38S-21W
M85049/38S-23W
M85049/38S-25W
Shell Size
Series III
Military
Part Number
Nickel
Military
Part Number
OD Cadmium
9
11
13
15
17
19
21
23
25
M85049/39-9N
M85049/39-11N
M85049/39-13N
M85049/39-15N
M85049/39-17N
M85049/39-19N
M85049/39-21N
M85049/39-23N
M85049/39-25N
M85049/39-9W
M85049/39-11W
M85049/39-13W
M85049/39-15W
M85049/39-17W
M85049/39-19W
M85049/39-21W
M85049/39-23W
M85049/39-25W
Shell Size
Series III
Military
Part Number
Nickel
Military
Part Number
OD Cadmium
9
11
13
15
17
19
21
23
25
M85049/39S-9N
M85049/39S-11N
M85049/39S-13N
M85049/39S-15N
M85049/39S-17N
M85049/39S-19N
M85049/39S-21N
M85049/39S-23N
M85049/39S-25N
M85049/39S-9W
M85049/39S-11W
M85049/39S-13W
M85049/39S-15W
M85049/39S-17W
M85049/39S-19W
M85049/39S-21W
M85049/39S-23W
M85049/39S-25W
Straight Cable Clamp - Nonself Locking Straight Cable Clamp - Self Locking
90° with Cable Clamp - Nonself Locking 90° with Cable Clamp - Self Locking
M85049/38
M85049/39
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 32 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
31
Backshell - Type P (Potting Boot)
Potting Boot Adapter Ring
Wire Sealing Plugs
How To Order (MS Version)
Shell Size
Series II
Series II
MS27486
Part Number
Cannon
Part Number
Series I
MS27486 - 10 - 1
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
1 - Straight Cup
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
MS Designation
Shell Size
Shell Size
A Dia. Max. B Dia. Max.Series I
8
10
12
14
16
18
20
22
24
.598 (15.19)
.723 (18.36)
.847 (21.51)
.969 (24.61)
1.087 (27.61)
1.211 (30.76)
1.336 (33.93)
1.461 (37.11)
1.586 (40.28)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.141 (29.98)
1.274 (32.36)
1.399 (35.53)
9
11
13
15
17
19
21
23
25
A
DIA.
B
8
10
12
14
16
18
20
22
24
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
040-0185-000
040-0169-000
040-0170-000
040-0171-000
040-0172-000
040-0173-000
040-0174-000
040-0175-000
040-0176-000
9
11
13
15
17
19
21
23
25
** Only even numbered shell size is applicable.
How To Order (MS Version)
Shell Size
Series
I
Series
II
MS27485
Part Number
Cannon
Part Number Cannon Cannon CannonMS MS MS
F
Nickel
N
Electroless
B
Cadmium/Nickel-O.D
A
Cadmium/Nickel Clear
Finishes
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
MS Finish
Only even numbered shell size is applicable
Cannon Finish
*
**
***
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
MS27485 - A - 8
Miltary Designation
Finish
Shell Size
8
10
12
14
16
18
20
22
24
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
237-0887-***
237-0874-***
237-0875-***
237-0876-***
237-0877-***
237-0878-***
237-0879-***
237-0880-***
237-0881-***
-000
-000
-000
-000
-000
-000
-000
-000
-000
-001
-001
-001
-001
-001
-001
-001
-001
-001
-002
-002
-002
-002
-002
-002
-002
-003
-003
B
B
B
B
B
B
B
B
B
F
F
F
F
F
F
F
F
F
A
A
A
A
A
A
A
A
A
9
11
13
15
17
19
21
23
25
Series III
Size
Series I & II
Size
Part Number
Cannon MS27488 Color Code
Wire sealing plugs meet MS27488 standards. The plugs are color coded according to size for easy
identification. Wire sealing plugs may be ordered separately.
22D
20
16
12
22D
20
16
12
225-1013-000
225-0070-000
225-0104-000
225-0105-000
MS27488-22-2
MS27488-20-2
MS27488-16-2
MS27488-12-2
Black
Red
Green
Orange
MIL-DTL-38999 Series I, II, III Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 33 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
32
MIL-DTL-38999 Series I, II, III Connectors
Tools - Crimp
Tools - Plastic
Tools - Metal (MS)
Contact
Size
Crimp Tool
Part Number
Locator or Turret
Part Number
Crimp Tool
Part Number
Locator or Turret
Part Number
Crimp Tool
Part Number
Locator or Turret
Part Number
Pin Contact
Series I/II/III
Socket Contact
Series II
Socket Contact
Series I & III
M22520/1-01 CBT-530 M22520/2-01 CBT-565
22D or 22M*
22*
20
16
12
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/2-09
M22520/2-09
M22520/1-04 OR TH 187
M22520/1-04 OR TH 187
M22520/1-04
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/2-06
M22520/2-06
M22520/1-04
M22520/1-04
M22520/1-04
M22520/2-07
M22520/2-07
M22520/1-04
M22520/1-04
M22520/1-04
Inner Conductor Crimp Tool Crimp Tool Locator
RG180 M22520/2-01 995-0002-268
RG 174, 179, 316 M22520/2-01 995-0002-268
RG 142 M22520/2-01 995-0002-268
Outer Conductor Crimp Tool Crimp Tool Locator
RG180 M22520/5-01 M22520/5-39B
RG 174, 179, 316 M22520/5-01 M22520/5-37B
RG 142 M22520/5-01 M22520/5-19B
* For reference only
8 Coax
Inner Conductor Crimp Tool Crimp Tool Locator
RG174, 179, 316 M22520/2-01 M22520/2-34
12 Coax
Outer Conductor Crimp Tool Crimp Tool Locator
RG174, 179, 316 M22520/31-01 M22520/31-02
Crimp Tool Crimp Tool Locator
Center Contact M22520/2-01 K709
Intermediate Contact M22520/5-01 Y631 Die Closure B
Outer Contact M22520/5-01 Y631 Die Closure A
8 Twinax
Insertion/Extraction
Contact
Size
Cannon
Description
Cannon
Part Number
M81969
Part Number
Insertion
Color Tip
Extraction
Color Tip
Superseded
Military
Part Number
22D
22M*
20
16
12
8 Coax/Twinax
12 Coax
CIET-22D-01
CIET-22D-01
CIET-20-10
CIET-16-03
CIET-12-04
CET8-T
CIET-12-04
274-7048-000
274-7048-000
274-7001-000
274-7002-000
274-7003-000
323-7004-001
274-7003-000
M81969/14-01
M81969/14-01
M81969/14-10
M81969/14-03
M81969/14-04
M81969/14-04
MS27534-22D
MS27534-22D
MS27534-20
MS27534-16
MS27534-12
M527534-12
Green
Green
Red
Blue
Yellow
Yellow
White
White
Orange
White
White
White
Insertion tool not required for size 8
Insertion
Insertion
Extraction
Extraction
No.1 No.2
Contact
Size
MS27495
Part Number
ITT CANNON
Part Number
Color
Band
MS27495
Part Number
ITT CANNON
Part Number
Color Band
22D OR 22M*
22*
20
16
Band No. 1 indicates tool size.
Band No. 2 indicates removal tool.
For reference only
*
MS27495 A22M
MS27495 A22
MS27495 A20
MS27495 A16
995-0001-718
995-0001-720
995-0001-716
995-0001-732
995-0001-719
995-0001-721
995-0001-717
995-0001-731
Black
Brown
Red
Blue
White
White
White
White
MS27495 R22M
MS27495 R22
MS27495 R20
MS27495 R16
Black
Brown
Red
Blue
Insertion/Extraction
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 34 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
Contact Insertion
Contact Extraction
3. Press tool against contact shoulder and, with
firm and even pressure, insert wired contact and
tool tip into center contact cavity. A slight click may
be heard as metal retaining tines snap into place
behind contact shoulder.
2. Using proper plastic or metal insertion tool for
corresponding contact, position wire in tip of the tool
so that the tool tip butts up against the contact
shoulder.
1. Remove hardware from plug or receptacle and
slip over wire bundle in proper order for
reassembly.
1. Remove hardware from plug or receptacle
and slide hardware back along wire bundle.
2. Using plastic or metal extraction tool with proper
color code corresponding to contact size, place wire in
tool.
3. Insert tool into contact cavity until tool tip
bottoms against the contact shoulder, expanding
clip retaining tines.
6. Reassemble plug or receptacle.5. Fill any empty wire cavities with wire sealing plugs, and4. Hold wire firmly in tool and extract wired
contact and tool. Repeat operation for all
contacts to be extracted.
5. After all contacts are inserted, fill any empty
cavities with wire sealing plugs, Ressemble plug
or receptacle hardware.
4. Remove tool and pull back lightly on wire to make
sure contact is properly seated. Repeat operation with
remainder of contacts to be inserted, beginning with
the center cavity and working outward in alternating
rows.
33
MIL-DTL-38999 Series I, II, III Connectors
Wire Stripping
Wire Size A
22D or 22M*
20
16
12
* For reference only
A.125 (3.18)
.188 (4.77)
.188 (4.77)
.188 (4.77)
Strip insulation from end of wire to be crimped.
(See table for proper stripping dimensions.) Do not
cut or damage wire strands.
VISUAL INSPECTION HOLE
1. Insert stripped wire into contact crimp pot.
Wire must be visible thru inspection hole.
3. Release crimped contact and wire from tool. Be
certain the wire is visible thru inspection hole in
contact.
2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert
contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The
tool will not release unless the crimp indentors in the tool head have been fully actuated.
Assembly Instructions
Contact Crimping
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 35 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
34
MIL-DTL-38999 Series I, II, III Connectors
MIL-DTL-38999 Specifications
After preloading to 3 pounds maximum, the force shall be applied at a rate of approximately 1 pound per second and maintained at full load for 5-10
seconds. No damage to contacts or insert shall result nor shall the contacts be dislocated from their normal position in the connector more than 0.012 inch
under the given load. Failure to meet these requirements shall be cause for rejection.
The following excerpts are some of the parameter requirements of the MIL-DTL-3899 Specication.
For qualication testing, mating halves shall be coupled and uncoupled, measuring the torques necessary.The torques required to couple and uncouple
mating connector halves shall fall within the limits specications as follows:
Connector halves shall be mated and unmated 250 times for Series II with ground ngers and 500 times for Series I and III at a rate not exceeding 300 cycles
per hour. The test may be performed by hand or by mechanical means, but the coupling ring shall be operated as in normal service. Failure to complete this
test because of mechanical malfunction shall be cause for rejection.
An insulation resistance test shall be performed on unmated connectors in accordance with MIL-STD-202, Method 302, Test condition B. Measurement shall
be made between three pairs of adjacent contacts and the shell. Failure to meet the minimum requirement of 50,000 megohms for Classes E, P, F, R, and
T shall be cause for rejection.
Wired, mated connectors shall be subjected to the vibration test of MIL-STD-202, Method 214, Test Condition II, except that the duration shall be one hour
in each plane. Receptacles shall be mounted on the vibration xture by normal means. All contacts shall be wired in a series circuit and 100-500 millamperes
of current shall be allowed to ow through the series circuit during vibration. Suitable means shall be employed to monitor the current ow and to indicate
any discontinuity of more than 1 microsecond. The wire bundle shall be damped to the nonvibrating points at least 8 inches from the rear of the connector.
Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall
be cause for rejection.
Wired mated connectors shall be subjected to one shock in each direction in each of three mutually perpendicular axes. The pulse shall be approximate half
sine wave of 300g ± 15% magnitude with a duration of 3 ± 1 milliseconds. Receptacles shall be mounted on a shock xture by normal means. All contacts
shall be wired in a series circuit and 100-150 ma. of current shall ow through the series circuit during shock. Suitable means shall be employed to monitor
the current ow and to indicate any discontinuity of more than 1 microsecond. The wire bundle shall be clamped to xed points at feast 8 inches from the
rear of the connector, Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening
of parts shall be cause for rejection.
Mated connectors shall be placed in a container of water at approximately 20ºC and placed in an altitude chamber. All wire ends shall be located within the
chamber and exposed to the chamber atmosphere, but not submerged. The exposed wire ends shall not be sealed. A quantity of salt, 5 percent by weight,
shall be added to make the water conductive. The chamber pressure shall then be reduced to approximately one inch of mercury and maintained for thirty
minutes. The chamber pressure shall then be slowly returned to atmospheric. This shall be considered one cycle. Two additional cycles shall be performed. At
the end of the last cycle, while the mated connectors are still submerged, the Insulation Resistance Test (room temperature), and the High Potential Test (sea
level voltages) shall be performed upon the same circuits. Failure to meet an insulation resistance minimum of 2,000 megohms or any evidence of dielectric
breakdown or -ashover shall be cause for rejection.
Unmated connectors shall be immersed fully in the applicable uid specied below for 20 hours. After removal from the uid, each connector shall
remain for one hour in free air at room temperature.
a.) Jet fuel JP-4 to MIL-J-5624 b.) Aircraft lubricating oil to MIL-L-9236
Unmated connectors and individual contact samples shall be subjected to the soft spray of MIL-STD-202, Method 101, Test Condition 8 (tin plated, Class Y
receptacles-24 hours). Immediately after exposure, the surfaces of the specimens shall be thoroughly washed in tap water and dried in a circulatory oven at
a temperature of 38 ±3ºC (100ºF) for a period of approximately 12 hours. Any exposure of basis metal as a result of this test, shall be cause for rejection.
(Series I and 11, nish B; Series III, class W). The wired assembled plugs and receptacles shall be mated and unmated 50 cycles at a rate of 300 cycles per hour
maximum. The mating and unmating shall be accomplished so that the plug and receptacle are completely separated during each cycle. The connectors shall
then be subjected to the salt spray test in accordance with method 1001 of MIL-STD- 1344. The connectors shall be tested for 452 hours mated followed by
48 hours unmated. After the salt spray exposure the remaining number of durability cycles specied in 4.7.7 shall be completed.
Unmated receptacles shall be subjected to 10 cycles of thermal shock in the following manner:
The receptacle shall be suspended for 10 + 1 - 0 minutes in the center of a cold water both with a volume of approximately one cubic foot. No
dimension of the bath shall be less than 10 inches. The water temperature shall not exceed 4ºC (39.20ºF)
The receptacle shall be suspended for 10 1 - 0 minutes in the center of a hot water bath with a volume of approximately one cubic foot. No
dimension of the bath shall be less than 10 inches. The water temperature shall be not less than 94ºC (201ºF).
The time of transfer from one bath to the other shall not exceed 5 seconds. At the end of the tenth cycle, the receptacle shall have the excess moisture shaken
off and shall then be dried in a forced air oven at 66±5˚C for 15 ±1 minutes. Any evidence of damage resulting from this test shall be cause for rejection.
Contact Retention 4 5 19
Test
Description
Paragraph
Reference Requirements
Coupling Torque 4 5 6
Durability 4 5 7
Insulation Resistance 4 5 9
Vibration 4 5 22
Shock 4 5 23
Thermal Shock 4 5 4
Altitude Immersion 4 5 8
Solvent Immersion 4 5 29
Corrosion 4 5 12
Dynamic Salt Spray 4 5 12 2
Temperature Durability 4 5 33
Step a
Step b
Contact Size 22M* 22D 22* 20 18
Loads in Pounds ± 10% 10 10 10 15 25
Torque
Shell Size Max. Min.
8/9 8 2
10/11 12 2
12 16 2
13 16 2
Torque
Shell Size Max. Min.
14 20 4
15 20 3
16 24 4
17 24 3
Torque
Shell Size Max. Min.
18 28 5
19 28 3
20 32 6
21 32 5
Torque
Shell Size Max. Min.
22 36 7
23 36 5
24 36 7
25 40 5
Wired rated connectors shall be subjected to the indicated anbient temperature for a period of 1,000 hours
Series I and II (nish A) 150 (302º F) Series I and II (nish B) 175 (347º F)
Series III (class W) 175 (347º F) All other nishes 200 (392º F)
+3º
-0ºC
+3º
-0ºC
+3º
-0ºC
+3º
-0ºC
* For reference only
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 36 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
35
Product Safety and Warranty
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials.
Electrical connectors and individual com-
ponents do not release or otherwise result
in exposure to hazardous chemicals under
normal conditions of use and fall under
the denition of “Article,” under the
Hazard Communication Standard, 29 CFR
1910.1200, and are not considered hazard-
ous materials.
Solder and uxes can be hazardous if inhaled
or absorbed through the skin and should
only be used as recommended by the manu-
facturer. Please consult your solder and ux
manufacturer for more specic application
recommendations.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no re hazard when the connector is
correctly wired and used within the specied
parameters. Incorrect wiring or assembly of
the connector or careless use of metal tools
or conductive uids, or transit damage to
any of the component parts may cause elec-
tric shock or burns. Live circuits must not be
broken by separating mated connectors as
this may cause arcing, ionization and burn-
ing. Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect appli-
cation tools or from poor quality soldering
or slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide lm on contacts
and wires and leakage currents through car-
bonization of insulation and tracking paths.
Fire can then result in the presence of com-
bustible materials and this may release nox-
ious fumes. Overheating may not be visually
apparent. Burns may result from touching
overheated components.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain com-
ponents to avoid injury to ngers. Always
wear safety glasses to avoid potential injury
to eyes during cleaning, soldering, ber
preparation, etc.
Electrical connectors may be damaged
in transit to the customers, and damage
may result in creation of hazards. Products
should therefore be examined prior to instal-
lation/use and rejected if found to be dam-
aged. Proper lifting techniques shall be used
for handling shipping cartons.
4. DISPOSAL
Please recycle, reclaim or dispose of connec-
tors and individual components in accor-
dance with local, state and federal laws.
Incineration of certain materials may release
noxious or even toxic fumes..
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current sup-
ply side of an electrical circuit, because an
electric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot
be transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before mak-
ing live, to have no damage to metal parts
or insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit resis-
tance and continuity check should be made
to make certain that there are no high resis-
tance joints or spurious conducting paths.
Always use the specied application tools,
cleaning materials and assembly instructions
documented in the Data Sheet/Catalog. Do
not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating
voltage. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safe-
ty regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
(iii) Pressure
All pressure information given are differen-
tial pressure limits. The specic differential
pressure limits, across the connector inter-
face, are documented in the Data Safety/
catalog
(iv) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
Commodities in this catalog may be con-
trolled for export or re-export under the
Export Administration Regulations (EAR),
Nuclear Regulatory Commission (NRC)
Regulations, or by the International Trafc
in Arms Regulations (ITAR) when specically
designed, modied or congured for mili-
tary use.
ITT Corporation Interconnect Solutions
Division, (“ITT”) manufactures high quali-
ty products. However, these products are
intended to be used in accordance with the
specications in this publication. Any use
or application that deviates from the stated
operating specications is not recommend-
ed and may be unsafe. No information and
data contained in this publication shall be
construed to create any liability on the part
of ITT.
Product Warranty
A limited product warranty applies to ITT
products. Please refer to www.ittcannon.
com (General Terms and Conditions of Sale)
for the complete text of ITT’s applicable
Terms and Conditions of Sale, including
warranty.
This publication is not to be construed as an
offer. It is intended merely as an invitation
to make an offer. ITT does not assume
liability for any patent infringement or viola-
tion of other rights claimed by third parties
which may result from its use.
With prior written consent, reprinting this
publication without any modications is
generally permitted.
“ITT”, the Engineered Blocks Logo and
“Engineered for life” are registered trade-
marks of ITT Corporation. All other trade-
marks or registered trademarks are property
of their respective owners. All dates subject
to change without notice.
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 37 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
ITT Cannon
ITT is a focused multi-industrial company that designs and man-
ufactures highly engineered critical components and customized
technology solutions. Our customers in the energy, transpor-
tation and industrial markets depend on us to solve their most
critical problems, and we focus on partnering with them to
nd solutions to their unique challenges. Founded in 1920, ITT
is headquartered in White Plains, N.Y., with employees in more
than 35 countries. The company has sales in approximately 125
countries and generated 2014 revenues of $2.7 billion.
Our connector portfolio remains the most extensive in the
industry, offering a reliable and cost effective range of inter-
connect solutions with the brands of Cannon, VEAM and BIW
Connector Systems. Continuous investment in technology and
research & development have enabled ITT to provide new, inno-
vative products and solutions to markets including:
Automotive
Computer & Consumer Electronics
Industrial/Instrumentation
Military & Aerospace
Oil & Gas
Telecommunications/Wireless Handheld Devices
Transportation
When you specify a Cannon, VEAM or BIW Connector Systems
connector, you can rely on products that are designed, devel-
oped, and manufactured to the highest quality and reliability
standards. This tradition of excellence is based on ITT’s corpo-
rate culture of operating its businesses under the principles
of Six Sigma. At ITT, Six Sigma is not just a quality philosophy
but a complete corporate culture that drives the entire busi-
ness. Our Value Based Management and Value Based Product
Development systems are two cornerstones that allow for the
development of both leadership and product engineering prin-
ciples, ensuring our industry leading products are developed to
the accepted market driven lead times. These principles have
allowed ITT to become the market leader in all of our business
portfolios.
Six Sigma Manufacturing
ITT Cannon operates manufacturing facilities in the United
States, Germany, Italy, Mexico, China and Japan, all of which
have particular product area strengths allowing ITT to offer a
truly global footprint to our customers. Our facilities are world
class and accommodate full vertical integration utilizing the
latest manufacturing technologies including: automated and
robotic machining centers, Super Market manufacturing cells,
Kanban pull systems, and automated electrical, mechanical,
and optical test and inspection equipment. The combination of
our manufacturing strength and our advanced manufacturing
facilities allows ITT to offer products at market driven prices.
Our capabilities, especially in robotics, computerized precision
tooling, Kaizen Project Management, Six Sigma tools, and test-
ing, give ITT the most optimized global manufacturing
footprint in the interconnect industry.
The Custom Difference
As the industry leader in harsh environment interconnect appli-
cations, ITT’s world class engineering teams will work directly
with our customers to design and develop cost effective solu-
tions for their applications. In many cases we may modify one
of our standard designs to ensure a highly reliable solution
where timing is critical. Yet, in those cases where a complete
custom interconnect solution is required, ITT will work with
our customer’s Engineers to design an interconnect solution
which will be cost effective yet highly reliable. As professional
consultants, our Engineering teams will provide a thorough
systems and mechanical analysis of any proposed solution.
These analyses provide our customers with sophisticated elec-
trical signal and mechanical characterizations to determine
the best solution for their application.
RoHS Compliance Information
ITT has implemented a strict parts control plan for all ITT
electronics plants worldwide that allows the Cannon, VEAM,
and BIW Connector Systems product portfolios to meet the
requirements of the European Union Directive 2002/95/EC bet-
ter known as the Reduction of Hazardous Substances (RoHS)
initiative. As appropriate, specic Cannon, VEAM, and BIW
Connector Systems products may be ordered with an R prex
number which insures our customers will receive RoHS com-
pliant parts for their commercial electronics applications and
equipment. Since most RoHS hazardous substances center
around specic metal plating and lead solder coatings, ITT’s
products for RoHS compliance are available in the following
plating nishes: electroless nickel, stainless steel, anodize over
aluminum and gold plating. It should be noted that gold plat-
ing would be recommended as the replacement for tin-lead
solder when ordering board mount connectors.
36
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 38 6/22/15 3:57 PM
www.ittcannon.com
Dimensions shown in inches (mm)
Specications and dimensions subject to change
37
Rack and Panel Connectors
Initially pioneered by Cannon during the 1930s, our Rack and
Panel Connectors offer an unmatched variety of shell congurations
and insert arrangements, as well as materials, plating and contact
options. Many of our standard and custom designs meet the
stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659)
and MIL-DTL-83733 standards.
Microminiature Connectors
Developed rst by Cannon in the 1960s, microminiature
connectors offer high performance and reliability with
exceptional versatility. Available in rectangular, circular
and strip congurations for countless applications, many
of our microminiature connectors meet or exceed applicable
requirements of the MIL-DTL-83513 specication.
RF Connectors
Since 1963, Cannon has provided connectors to the Microwave
and RF industry. The RF 50 & 75 Ohm product lines cover UHF
band through Ku band requirements. These connectors and cable
assemblies are available with a thread type, snap type, bayonet
type or slide on coupling method. The frequencies range from DC
to 18+ GHz.
D-Subminiature Connectors
Cannon invented D-Sub connectors in 1952. Our family of
D-Subs now includes combinations of signal, power and RF,
as well as severe service sealed connectors. Cannon D-Sub
are available with an extensive line of backshells and
accessories and are one of the most economical shielded
connector solutions available. Our D-Sub connectors are
qualied to the MIL-DTL- 24308 specication.
Transportation
We offer a range of sealed circular and rectangular connectors in
metal or plastic shells. These congurations include board to cable
or cable to cable/ bulkhead applications. Both signal and power
contacts can be combined in various layouts. All product lines within
the Transportation segment offer very low contact resistance and
deliver maximum signal integrity.
As a world leader in circular, lter and hermetic connectors, ITT
Cannon leverages its design and manufacturing expertise to t
virtually any application. Our expertise includes fast positive mating
for a wide range of military applications, as well as numerous sizes
and contact congurations for harsh environments. Our wide variety
of ber optic products include hybrid contacts, multi-channel, rack
and panel and hi-rel assemblies, including MIL and ARINC standard
solutions. ITT can meet numerous specs, including NATO and MIL
standards.
Circular/Filter/Hermetic/Fiber Optic Connectors
Meet Some of Our Most Popular Connectors
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 39 6/22/15 3:57 PM
Connect with your ITT Cannon
representative today or visit us at
www.ittcannon.com
Connect with the experts.
Whether communicating with our soldiers, or with our first responders saving
lives, ITT Cannon connects the world’s most important information with those
who need it.
CHINA—Shenzhen City
+86.755.2726.7888
JAPAN—Kanagawa
+81.462.57.2010
USA—Watertown, CT
+1.860.274.9681
GERMANY—Weinstadt
+49.7151.699.0
KOREA—Seoul
+82.2.7027111
© 2015 ITT Corporation, Inc.
MIL_DTL_38999_Connectors_cat_201506
The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“ are registered trademarks of ITT Corporation.
Specification and other data are based on information available at the time of printing, and are subject to change without notice.
HONG KONG
+852.2732.2720
TAIWAN—Taipei
+
886.2.25452020
ITALY—Lainate
+39.02938721
UK—Basingstoke
+44.1256.311200
USA—Orange County, CA
+1.800.854.3028
Mil-DTL-38899_2015_Layout 1 ITT BLUE.indd 40 6/22/15 3:57 PM