LS T670, LO T670, LY T670, LG T670, LP T670
TOPLED®
Lead (Pb) Free Product - RoHS Compliant
2004-08-16 1
Besondere Merkmale
Gehäusetyp: we ißes P-LC C-2 -Ge häus e,
farbloser klarer Verguss
Besonderheit des Bauteils: extrem breite
Abstrahlcharakteristik; ideal für Hinterleuchtungen
und Einkopplungen in Lichtleiter
Wellenlänge: 628 nm (super-rot),
606 nm (orange), 587 nm (gelb), 570 nm (grün),
560 nm (pure green)
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: GaAsP (super-rot, orange, gelb,
grün), GaP (pure green)
optischer Wirkungsgrad: 1,5 lm/W (super-rot,
orange, gelb), 2,5 lm/W (grün),
0,6 lm/W (pure green)
Gruppierungsparameter: Lichtstärke,
Wellenlänge
Verarbeitungsmethode: für alle
SMT -Bestü ck tech nik en geeigne t
Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
Vorbehandlung: nach JED EC Level 2
Gurtung: 8-mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Anwendungen
Informationsanzeigen im Innen- und Außenbereich
optischer Indikator
Hinterleuchtung (LCD, Handy, Schalter, Tasten,
Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
Innenbeleuchtung im Automobilbereich
(z. B. Instrumentenbeleu chtung)
Markierungsbeleuchtung (z.B. Stufen, Fluchtwege,
u.ä.)
Einkopplung in Lichtleiter
Laufschriftanzeigen
Signal- und Symbolleuchten
Features
package: white P-LCC-2 package, colorless clear
resin
feature of the device: extremely wide viewing
angle; ideal fo r backlighting and coupling in light
guides
wavelength: 628 nm (super-red),
606 nm (orange), 587 nm (yellow),
570 nm (green), 560 nm (pure green)
viewin g angle: Lambertian Emitter (120°)
technology: GaAsP (super-red, orange, yellow,
green), GaP (pure green)
optical efficiency: 1.5 lm/W (super-red, orange,
yello w), 2.5 lm/W (green), 0.6 lm/W (pure green)
grouping parameter: luminous intensity,
wavelength
assembly methods: suitable for all
SMT assembly meth ods
soldering methods: IR reflow soldering and
TTW soldering
preconditioning: acc . to JEDEC Lev el 2
taping: 8 mm tape with 2000/reel, ø180 mm
or 8000 /reel, ø330 mm
Applications
indoor and outdoor disp lay s
optical indicators
backlighting (LCD, cellular phones, switches, keys,
displays, illuminated advertising, general lighting)
interio r automot ive lightin g
(e.g. dashboard backlighti ng)
marker lights (e.g. steps, exit ways, etc.)
coupling into light g u ides
light writing displays
signal and symb ol luminaire
2004-08-16 2
LS T670, LO T670, LY T670, LG T670, LP T670
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LO T670-J1K2-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen J1, J2, K1
oder K2 ent halten ist.
Um die Li ef ers ic herheit zu gewährleisten, nnen einze lne H elligkeits gruppen nicht bes te llt werden.
Gleiche s gilt für die Fa rben, bei d enen Welle nlänge ngruppen ge messen un d grupp iert werden. Pro Gurt wird
nur eine Wellenlängengruppe geliefert. Z.B.: LO T670-J1K2-24 bedeutet, dass auf dem Gurt nur eine der
Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5r nähere Information). LG T670-K1L2-1
bedeut et , da ss das Bauteil inn erhalb der auf Seite 4 spezifizierten Grenzen geliefert wird.
Um die Li ef ers ic herheit zu gewährleisten, nnen einze lne W ellenlängengrupp en nicht bestellt w erden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5
for explana tion). On ly one group will be ship ped on each reel (there will b e no mixin g of two grou ps on each
reel). E.g. LO T670-J1K2-24 means tha t on ly one group J1, J2 , K1 or K2 w ill be s hippable fo r any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a sim ilar mann er for colors w here wav elengt h grou ps are mea sured and binned , si ngle w avele ngth groups
will be ship ped on an y one reel. E. g. LO T670-J1K2-24 means t hat only 1 wa velength gro up -2, -3, or -4 will
be shippable. LG T670-K1L2-1 means that the device will be shiped within the specified limits as stated on
page 4.
In order to ens ure availab ilit y , single wavelen gt h groups will not be orderable (s ee page 5 for explanation ).
Bestellinformation
Ordering Information
Typ
Type
Emissions-
farbe
Color of
Emission
Lichtstärke1) Seite 15
Luminous
Intensity1) page 15
IF = 10 mA
IV (mcd)
Lichtstrom2) Seite 15
Luminous
Flux2) page 15
IF = 10 mA
ΦV (mlm)
Bestellnummer
Ordering Code
LS T670-J1K2-1
LS T670-K1L2-1
LS T670-J1L2-1
super-red 4.50 ... 11.20
7.10 ... 18.00
4.50 ... 18.00
24 (typ.)
40 (typ.)
30 (typ.)
Q65110A2170
Q65110A2171
Q65110A2172
LO T670-J1K2-24
LO T670-K1L2-24
LO T670-J1L2-24
orange 4.50 ... 11.20
7.10 ... 18.00
4.50 ... 18.00
24 (typ.)
40 (typ.)
30 (typ.)
Q65110A2164
Q65110A2165
Q65110A2166
LY T670-J1K2-26
LY T670-K1L2-26
LY T670-J1L2-26
yellow 4.50 ... 11.20
7.10 ... 18.00
4.50 ... 18.00
24 (typ.)
40 (typ.)
30 (typ.)
Q65110A2173
Q65110A2174
Q65110A2175
LG T670-K1L2-1
LG T670-L1M2-1
LG T670-K1M2-1
green 7.10 ... 18.00
11.20 ... 28.00
7.10 ... 28.00
40 (typ.)
60 (typ.)
50 (typ.)
Q65110A2162
Q65110A2120
Q65110A2132
LP T670-G2J1-1
LP T670-H2J2-1
LP T670-G2J2-1
pure green 2.24 ... 5.60
3.55 ... 7.10
2.24 ... 7.10
12 (typ.)
15 (typ.)
14 (typ.)
Q65110A2167
Q65110A2168
Q65110A2169
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS, LO,
LY, LG LP
Betriebstemperatur
Operating temperature range Top – 40 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 40 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 100 °C
Durchlassstrom
Forward current
(TA=25°C)
IF30 mA
Stoßstrom
Surge current
t 10 µs, D = 0.005, TA=25°C
IFM 0.5 A
Sperrspannung3) Seite 15
Reverse voltage3) page 15
(TA=25°C)
VR12 V
Leistungsaufnahme
Power consumption
(TA=25°C)
Ptot 95 90 mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung4) Seite 15
Junction/ambient4) page 15
Sperrschicht/Lötpad
Junction/soldering point
Rth JA
Rth JS
400
180
K/W
K/W
2004-08-16 4
LS T670, LO T670, LY T670, LG T670, LP T670
Kennwerte
Characteristics
(TA = 25 °C)
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS LO LY LG LP
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 10 mA
λpeak 635 610 586 572 557 nm
Dominantwellenlänge5) Seite 15
Dominant wavelength5) page 15
IF = 10 mA
λdom 628
± 6 606*
–6/+3 587*
–7/+8 570
± 6 560
± 6 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 10 mA
∆λ 45 40 45 25 22 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ120 120 120 120 120 Grad
deg.
Durchlassspannung6) Seite 15 (typ.)
Forward voltage6) page 15 (max.)
IF = 10 mA
VF
VF
2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 V
V
Sperrstrom (typ.)
Reverse current (m a x.)
VR = 12 V
IR
IR
0.01
10 0.01
10 0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 10 mA; –10°C T 100°C
TCλpeak 0.11 0.12 0.10 0.11 0.11 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 10 mA; –10°C T 100°C
TCλdom 0.07 0.07 0.07 0.07 0.05 nm/K
Temperaturkoeffizient vonVF(typ.)
Temperature coefficient of VF
IF = 10 mA; –10°C T 100°C
TCV– 1.9 – 1.9 – 1.9 – 1.4 – 2.1 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 10 mA
ηopt 1.5 1.5 1.5 2.5 0.6 lm/W
* Einzelgruppen si ehe Seite 5
Individual groups on pa ge 5
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 5
Wellenlängengruppen (Dominantwellenlänge)5) Seite 15
Wavelength Groups (Dominant Wavelength)5) page 15
Gruppe
Group yellow orange Einheit
Unit
min. max. min. max.
2580 583 600 603 nm
3583 586 603 606 nm
4586 589 606 609 nm
5589 592 nm
6592 595 nm
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group Lichtstärke1) Seite 15
Luminous Intensity1) page 15
IV (mcd)
Lichtstrom2) Seite 15
Luminous Flux2) page 15
ΦV (mlm)
G2
H1
H2
J1
J2
K1
K2
L1
L2
M1
M2
2.24 ... 2.80
2.80 ... 3.55
3.55 ... 4.50
4.50 ... 5.60
5.60 ... 7.10
7.10 ... 9.00
9.00 ... 11.20
11.20 ... 14.00
14.00 ... 18.00
18.00 ... 22.40
22.40 ... 28.00
7.6 (typ.)
9.5 (typ.)
12.0 (typ.)
15.0 (typ.)
19.0 (typ.)
24.0 (typ.)
30.0 (typ.)
40.0 (typ.)
50.0 (typ.)
60.0 (typ.)
75.0 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe. Diese
besteht aus 3, 4 bzw. 6 Helligkeitsgruppen bes t eht. Einzel ne H elligkeitsgruppen sind nic ht bes te llbar.
Note: The standard shipping format for serial types includes a lower or upper family group of 3, 4 or 6 individual
brightness groups. Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: K1-3
Example: K1-3
Helligkeitsgruppe
Brightness Group Wellenlänge
Wavelength
K1 3
Anm.: In einer Ve rpac k ungseinh eit / Gurt ist imm er nur eine Gru ppe für jede Selek tion enthalt en.
Note: No packin g unit / tap e ever contain s more than on e group for each selec t ion.
2004-08-16 6
LS T670, LO T670, LY T670, LG T670, LP T670
Relative spektrale Emission2) Seite 15
Relative Spectral Emission2) page 15
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Irel = f (λ); TA = 25 °C; IF = 10 mA
Abstrahlcharakteristik2) Seite 15
Radiation Characteristic2) page 15
Irel = f (ϕ); TA = 25 °C
%
rel
λ
OHL01697
100
80
60
40
20
0
400 450 500 550 600 650 70
0
nm
I
pure-green
green
yellow
orange
super-red
λ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
10˚20˚40˚ 30˚ OHL01660
50˚
60˚
70˚
80˚
90˚
100˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 7
Durchlassstrom2) 7) Seite 15
Forward Current2) 7) page 15
IF = f (VF); TA = 25 °C
Relative Lichtstärke2) 7) Seite 15
Relative Luminous Intensity2) 7) page 15
IV/IV(10 mA) = f (IF); TA = 25 °C
Relative Lichtstärke2) Seite 15
Relative Luminous Intensity2) page 15
IV / IV(25 °C)= f (Tj); IF = 10 mA
10
-1
V
pure-green
5
super-red
orange/yellow
green
OHL02145
I
F
F
V
0
10
1
10
2
10
5
mA
1.0 1.4 1.8 2.2 2.6 3.0 3.
4
green
OHL00993
1
10
100
5
5
-1
10
10 0
10
-2 51
10
2
10mA
I
V (10 mA)
I
V
F
I
yellow
pure-green
super-red
orange
yellow
green
orange
super-red
pure-green
0.0
OHL02150
˚C
j
02040608010
0
V
V
I
I
0.4
0.8
1.2
1.6
2.0
(25 ˚C)
T
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 8
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
IF = f (TA)
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
T
OHL00962
0
F
I
0 20 40 60 80 C 100
mA
10
20
30
40
T
A
T
S
temp. ambient
temp. solder point
Τ
A
Τ
S
OHL01686
s10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
DI
TT
P
F
t
P
=
D
=0.005
0.01
0.02
0.05
0.2
0.5
DC
10
1
5
I
F
t
2
10
0.1
p
10
3
mA
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 9
Maßzeichnung8) Seite 15
Package Outlines8) page 15
Kathodenkennung: abgeschrägte Ecke
Cathode mark: bevelled edge
Gewicht / Approx. weight: 35 mg
Gurtung / Polarität und Lage8) Seite 15 Verpackungseinheit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation8) page 15 Packing unit 2000/reel, ø180 mm or 8000/reel,
ø330 mm
GPLY6724
0.7 (0.028)
0.9 (0.035)
1.7 (0.067)
2.1 (0.083)
0.12 (0.005)
0.18 (0.007)
0.5 (0.020)
1.1 (0.043)
3.3 (0.130)
3.7 (0.146)
0.4 (0.016)
0.6 (0.024)
2.6 (0.102)
3.0 (0.118)
2.1 (0.083)
2.3 (0.091)
C
athode marking
3.0 (0.118)
3.4 (0.134)
(2.4) (0.095)
0.1 (0.004) (typ.)
4˚±1
A
C
OHAY227
1
3.6 (0.142)
8 (0.315)
3.5 (0.138)
1.75 (0.069)
4 (0.157)1.5 (0.059)
2.9 (0.114) 4 (0.157)
2 (0.079) Cathode/Collector Marking
2004-08-16 10
LS T670, LO T670, LY T670, LG T670, LP T670
Empfohlenes Lötpaddesign8) 9) Seite 15 IR-Reflow Löten
Recommended Solder Pad8) 9) page 15 IR Reflow Soldering
Empfohlenes Lötpaddesign verwendbar für TOPLED® und Power TOPLED®
IR Reflow Löten8) Seite 15
Recommended Solder Pad useable for TOPLED® and Power TOPLED®
IR Reflow Soldering8) page 15
OHLPY97
4.5 (0.177)
2.6 (0.102)
Cu-area > 16 mm
Cu-Fläche > 16 mm
2
Solder resist
Lötstopplack
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
Padgeometrie für
improved heat dissipation
verbesserte Wärmeableitung
Paddesign for
OHLPY440
Padgeometrie für
verbesserte Wärmeableitung
improved heat dissipation
Paddesign for
Lötstoplack
Solder resist
0.8 (0.031)
3.7 (0.146)
1.1 (0.043)
2.3 (0.091)
3.3 (0.130)
1.5 (0.059)
11.1 (0.437)
Cu Fläche / 16 mm per pad
2
Cu-area
_
<
3.3 (0.130)
Kathode/
Cathode
Anode
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
0.7 (0.028)
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 11
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil für bleifreies Löten (nach J-STD-020B)
IR Reflow Soldering Profile for lead free soldering (acc. to J-STD-020B)
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
OHLA0687
0
0
T
t
˚C
s
120 s max
50
100
150
200
250
300
Ramp Up
100 s max
50 100 150 200 250 30
0
Ramp Down
6 K/s (max)
3 K/s (max)
25 ˚C
30 s max
260 ˚C +0 ˚C
-5 ˚C
245 ˚C ±5 ˚C
240 ˚C
255 ˚C
217 ˚C
Maximum Solder Profile
Recommended Solder Profile
235 ˚C -0 ˚C
+5 ˚C
Minimum Solder Profile
10 s min
min. condition for IR Ref low Soldering:
solder poin t tem perature 235 °C fo r at le as t 10 sec.
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
2004-08-16 12
LS T670, LO T670, LY T670, LG T670, LP T670
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
Gurtverpackung
Tape and Reel
Tape dimension s in mm (inc h)
W P0P1P2D0E F
4 ± 0.1
(0.157 ± 0. 004) 4 ± 0.1
(0.157 ± 0.004) 2 ± 0.05
(0.079 ± 0.00 2) 1.5 + 0.1
(0.059 + 0. 004) 1.75 ± 0.1
(0.069 ± 0. 004) 3.5 ± 0.05
(0.138 ± 0.002)
Reel dimensions in m m (i nc h)
A W Nmin W1W2 max
180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567)
330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567)
S
am
ple
OHA1204
3
X - X - X(G) GROUP:
Lot Number(1T) LOT NO: (9D) D/C:Date Code
(X) PROD NO: Product Code
(6P) BATCH NO: Batch Number
Lx xxxx
Product Name
RoHS Compliant
Bin1: Bin Information Color 1
Bin2:
Bin3:
ML
2Temp ST
260 C RT
Additional TEXT
R077 DEMY
PACKVAR: Packing Type
Product Quantity per Reel(Q)QTY:
Semiconductors
OSRAM Opto
Wavelength Rank
Forward Voltage Rank
Brightness Rank
Bar Code
Bar Code
Bar Code
D
0
2
PP
0
1
P
W
FE
Direction of unreeling
N
W
1
2
W
A
OHAY0324
Label
Gurtvorlauf:
Leader:
Trailer:
Gurtende:
13.0
Direction of unreeling
±0.25
160 mm
160 mm
400 mm
400 mm
8
+ 0.3
– 0.1
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 13
Trockenverpackung und Materialien
Dry Packing Process and Materials
Anm.: Feuchte em pf indliche P rodukte sin d ve rpackt in ein em Tr oc ke nbeutel zus am m en mit einem T roc k enm it t el und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der J ED EC-Norm , ent halt en.
Note: Moisture-seni sitv e product is pa cked in a dry bag con taining desic c ant and a humidity ca rd.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape an d Re el” under the topic “Dry Pack ”. He re y ou w ill also find the no rm at iv e ref erences like JE DE C.
Kartonverpackung und Materialien
Transportation Packing and Materials
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode lab
el
OSRAM
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
WET
Do not eat.
Comparator
check dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%
bake units
bake units
If wet,
change desiccant
If wet,
Humidity Indicator
MIL-I-8835
If wet,
Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
OHA02044
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
0245
(Q)QTY:
2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
OSRAM
Barcode label
Packing
Sealing label
Barcode lab
el
Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
2004-08-16 14
LS T670, LO T670, LY T670, LG T670, LP T670
Attention please!
The inform at ion describes the type of co m ponent and sha ll not be c ons idered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous subs ta nc es . For in fo rm at ion on the type s in qu es t ion please cont ac t our Sales Orga niz at ion.
If printed or download ed, please find th e lat es t vers ion in the Inte rnet .
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touc h with your nearest sale s office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Compo nents use d in life-support de vices or syste ms must be express ly authorize d for such purp ose! Critical
components10) page 15 m ay only b e used in life -supp ort devic es o r syst ems11) page 15 with the expres s writ ten ap prova l of
OSRAM OS.
Revision History: 2004-08-16
Previous Version: -
Page Subjects (major changes since last revision) Date of change
LS T670, LO T670, LY T670, LG T670, LP T670
2004-08-16 15
Fußnoten:
1) Helligkeitswerte werden mit einer
Stromeinprägedauer von 25 ms und einer
Genauigk eit von ± 11% ermit t elt.
2) Wegen d er besonderen Proze ssbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
und abgeleiteten Werten oder typischen Kennlinien
unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden diese
typischen Werte ohne weitere Ankündigung geändert.
3) Die LED kann kurzzeitig in Sperrichtung betrieben
werden.
4) Montage auf PC-Board FR 4 (Padgröße 16 mm 2)
5) Wellenlängen werden mit einer Stromeinprägedauer
von 25 ms und einer Genauigkeit von ±1 n m ermit telt.
6) Spannungswerte werden mit einer
Stromeinp rägedauer vo n 1 ms und eine r Genauigkeit
von ±0,1 V ermittelt.
7) Im gestrichelten Bereich der Kennlinien muss mit
erhöhten Helligkeitsunterschieden zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
8) Maße werden wie folgt angegeben: mm (inch)
9) Gehäus e hält TTW-Löthitze aus na ch CECC 00802
10) Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden Apparaten oder Systemen
eingese tzt wird und de ssen Defekt voraussich tlich zu
einer Fehlfunktion dieses lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
11) Lebens erhaltend e Apparate od er Sy s t em e s ind f ür
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundh eit und d as Le ben des Patienten in
Gefahr ist .
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1) Brightness groups are tested at a current pulse
duration of 25 ms and a tol erance of ± 11%.
2) Due to the special conditions of the manufacturing
processes of LED, the typical data or calculated
correlations of technical parameters can only reflect
statistical figures. These do not necessarily
correspond to the actual parameters of each single
product, which could differ from the typical data and
calculated correlations or the typical characteristic
line. If requested, e.g. because of technical
improvements, these typ. data will be changed without
any furthe r not ic e.
3) Driving the LED in reverse direction is suitable for
short term application.
4) Mounted on PC board FR 4 (pad size 16 mm 2)
5) Wavelengt hs are te sted at a current pulse dura tion of
25 ms and a t oler anc e of ±1 nm.
6) Forward voltages are tested at a current pulse
duration of 1 m s and a t olerance of ±0.1 V.
7) In the range where the line of the graph is broken, you
must expect higher brightness differences between
single LED s w ith in one packing unit.
8) Dimensions are specified as follows: mm (inch).
9) Package able to withstand TTW-soldering heat acc. to
CECC 00802
10) A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-suppor t device or s ystem, or to aff ect its s afety or
the effectiveness of that device or system.
11) Life support dev ic es or systems are intende d
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the use r may be endangered.