Not for New Design - Alternative Series 153 CRV 153 CLV Vishay BCcomponents Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum board space, reflow solderable High CV per unit volume Long useful life: 2000 h to 3000 h at 105 C Charge and discharge proof, no peak current limitation Supplied in blister tape on reel 140 CLH Lead (Pb)-free ATTENTION: for maximum safe soldering conditions refer to fig.4 150 CLZ 153 CLV 153 CRV Lead (Pb)-free APPLICATIONS SMD technology, for high mounting density Coupling, decoupling, smoothing, filtering, buffering, QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range VALUE 4.0 x 4.0 x 5.3 to 10 x 10 x 14 timing Telecommunications, general industrial, EDP, automotive, portable and lightweight equipment 0.47 F to 1000 F 20 % MARKING 6.3 V to 100 V - 55 C to + 105 C Endurance test at 105 C: Rated capacitance (in F) Rated voltage (in V) Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 1000 h Date code, in accordance with IEC 60062 Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 2000 h Black mark or `' sign indicating the cathode (the anode is identified by bevelled edges) Useful life at 105 C: Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 2000 h Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 3000 h Useful life at 40 C; 1.3 x lR applied: 200 000 h Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 300 000 h Based on sectional specification Climatic category IEC 60068 Document Number: 28302 Revision: 11-Jul-12 PACKAGING Supplied in blister tape on reel Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 Shelf life at 0 V, 105 C Code indicating group number (V) 1000 h IEC 60384-18/ CECC 32300 55/105/56 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Aluminum Capacitors SMD (Chip) Long Life Vertical Vishay BCcomponents SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (F) 6.3 10 16 25 35 50 63 100 0.47 - - - - - 4.0 x 4.0 x 5.3 - - 1.0 - - - - - 4.0 x 4.0 x 5.3 - - 2.2 - - - - - 4.0 x 4.0 x 5.3 - - 3.3 - - - - - 4.0 x 4.0 x 5.3 - - 4.7 - - - - 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 - - 10 - - 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 - - 22 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - - 33 - 5.0 x 5.0 x 5.3 8.0 x 8.0 x 10 - 10 x 10 x 14 47 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - 8.0 x 8.0 x 10 - - 6.3 x 6.3 x 5.3 - 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 - 10 x 10 x 10 10 x 10 x 14 - 100 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - - - - - - - - 220 - 8.0 x 8.0 x 10 10 x 10 x 10 - - - - - 330 8.0 x 8.0 x 10 10 x 10 x 10 - 10 x 10 x 14 - - - - 470 10 x 10 x 10 - 10 x 10 x 14 - - - - - 680 - 10 x 10 x 14 - - - - - - 1000 10 x 10 x 14 - - - - - - - Table 1 TAPE AND REEL DIMENSIONS in millimeters AND PACKAGING QUANTITIES CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIA. PACKAGING QUANTITY PER REEL 0405 8 12 5.8 380 2000 0505 12 12 5.8 380 1000 0605 12 16 5.8 380 1000 0807 12 16 6.8 380 1000 0810 16 24 11.3 380 500 1010 16 24 11.3 380 500 1014 16 24 14.8 330 250 Note * Detailed tape dimensions see section `PACKAGING'. www.vishay.com 2 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28302 Revision: 11-Jul-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Aluminum Capacitors SMD (Chip) Long Life Vertical Vishay BCcomponents Table 2 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 CASE CODE Lmax. Wmax. Hmax. OD Bmax. S C MASS (g) 0405 0505 0605 0807 0810 1010 1014 4.5 5.5 6.8 8.6 8.6 10.6 10.6 4.5 5.5 6.8 8.6 8.6 10.6 10.6 5.5 5.5 5.5 6.8 10.5 10.5 14.3 4.0 5.0 6.3 8.0 8.0 10.0 10.0 0.8 0.8 0.8 0.8 1.1 1.1 1.2 1.0 1.4 2.0 2.3 3.1 4.7 4.5 2.0 0.2 2.3 0.2 2.7 0.2 3.4 0.2 3.0 0.2 3.3 0.2 3.9 0.2 0.13 0.20 0.30 0.50 1.00 1.30 1.50 L 0.4 0.2 WB C S C 0.3 max. Fig.2 Dimensional outline MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and/or adjacent components. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. For maximum conditions refer to Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. Table 3 Fig.3 Recommended solder pad dimensions AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. T PAD 280 (C) 260 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters 240 CASE CODE a b c 220 0405 2.6 1.6 1.0 200 0505 3.0 1.6 1.4 180 0605 3.5 1.6 1.9 160 0807 4.0 1.6 2.1 140 0810 3.5 2.5 3.0 1010 4.0 2.5 4.0 1014 4.3 2.5 4.0 120 100 80 0 Document Number: 28302 Revision: 11-Jul-12 50 100 t (s) 250 Fig.4 Maximum temperature load during infrared reflow soldering measured on the soldering pad For technical questions, contact: aluminumcaps1@vishay.com 150 200 www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Vishay BCcomponents Aluminum Capacitors SMD (Chip) Long Life Vertical ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR Electrolytic capacitor 153 series DESCRIPTION rated capacitance at 100 Hz or 120 Hz, tolerance 20 % rated RMS ripple current at 100 Hz or 120 Hz, 105 C max. leakage current after 2 minutes at UR max. dissipation factor at 100 or 120 Hz equivalent series resistance at 100 kHz 100 F/25 V; 20 % Nominal case size: 8 mm x 8 mm x 10 mm; taped on reel IL2 tan ESR Note * Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Ordering code: MAL215366101E3 Former 12NC: 2222 153 66101 Table 4 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 100 CR (F) 22 47 100 330 470 1000 33 220 330 680 10 22 47 100 220 470 33 47 100 330 4.7 10 22 33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 100 33 www.vishay.com 4 NOMINAL CASE SIZE L xWxH (mm) 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 5.0 x 5.0 x 5.3 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 10 x 10 x 10 10 x 10 x 14 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 10 x 10 x 14 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 10 x 10 x 14 IR 105 C (mA) 21 36 61 180 320 400 31 180 320 380 16 28 47 110 320 370 44 110 180 300 14 23 50 110 5 7 10 12 17 26 110 180 180 320 240 170 IL2 2 min (mA) 3.0 3.0 6.3 21 30 63 3.3 22 33 68 3.0 3.5 7.5 16 35 75 8.3 12 25 83 3.0 3.5 7.7 12 3.0 3.0 3.0 3.0 3.0 5.0 11 17 24 50 63 33 tan 0.30 0.30 0.30 0.30 0.30 0.24 0.26 0.26 0.26 0.19 0.22 0.22 0.22 0.22 0.22 0.16 0.16 0.16 0.16 0.14 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.09 0.07 ESR 100 kHz () 8 4 2 0.5 0.3 0.24 4 0.5 0.3 0.24 8 4 2.2 1.2 0.3 0.25 2.2 1.2 0.5 0.27 8 4 2.2 1.2 12 12 12 12 6 3 1.2 0.5 0.5 0.3 0.41 0.65 For technical questions, contact: aluminumcaps1@vishay.com ORDERING CODE MAL2153....... 63229E3 63479E3 63101E3 63331E3 63471E3 63102E3 64339E3 64221E3 64331E3 64681E3 65109E3 65229E3 65479E3 65101E3 65221E3 65471E3 66339E3 66479E3 66101E3 66331E3 60478E3 60109E3 60229E3 60339E3 61477E3 61108E3 61228E3 61338E3 61478E3 61109E3 61229E3 61339E3 61479E3 61101E3 68101E3 69339E3 Document Number: 28302 Revision: 11-Jul-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Aluminum Capacitors SMD (Chip) Long Life Vertical Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Surge voltage IEC 60384-18, subclause 4.14 Us 1.15 x UR Reverse voltage IEC 60384-18, subclause 4.16 Urev 1 V after 2 min at UR IL2 0.01 x CR x UR or 3 A, whichever is greater case codes 0405 to 0605 typ. 10 nH Voltage Current Leakage current Inductance Equivalent series inductance (ESL) case codes 0807 to 1010 typ. 15 nH case codes 1014 typ. 16 nH CAPACITANCE (C) EQUIVALENT SERIES RESISTANCE (ESR) 1.1 102 2 C C0 1 ESR () 1.0 10 1 0.9 2 1 0.8 Curve 1: 1 F, 50 V Curve 2: 100 F, 6.3 V 2 3 1 Curve 1: 22 F, 6.3 V Curve 2: 22 F, 16 V Curve 3: 22 F, 25 V 0.1 0.7 - 40 - 20 0 20 40 60 80 100 0.1 120 1 10 102 103 Tamb (C) C0 = Capacitance at 20 C f (kHz) Fig.5 Typical multiplier of capacitance at 100 Hz or 120 Hz as a function of ambient temperature DISSIPATION FACTOR (tan ) Fig.6 Typical ESR as a function of frequency at 20 C IMPEDANCE (Z) 102 10 tan Curve 1: 1 F, 50 V Curve 2: 100 F, 6.3 V 2 Z () 1 10 1 1 0.1 2 3 1 0.01 Curve 1: 22 F, 6.3 V Curve 2: 22 F, 16 V Curve 3: 22 F, 25 V -1 0.1 - 60 - 40 - 20 0 20 40 60 80 100 120 0.1 1 Tamb (C) Fig.7 Typical dissipation factor (tan ) at 100 Hz or 120 Hz as a function of ambient temperature Document Number: 28302 Revision: 11-Jul-12 10 102 103 f (kHz) Fig.8 Typical impedance as a function of frequency at 20 C For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Aluminum Capacitors SMD (Chip) Long Life Vertical Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA IR 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 lifetime multiplier 2.6 1. 0 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 12 20 30 0 case codes 0807 to 1014: 3000 h (1) 0 case codes 0405 to 0605: 2000 h 60 Useful life at 105 C and IR applied: 10 1.2 1.0 0.8 0.5 0.0 (1) 20 1.4 For case codes 0405 to 1010 max. IA/IR = 2.4 0 1.6 at 105 C 15 IR = rated ripple current at 100 Hz or 120 Hz 0 8. 1.8 IA = actual ripple current at 100 Hz or 120 Hz 40 50 60 70 80 90 100 110 Tamb (C) Fig.9 Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V to 16 V UR = 25 V or 35 V UR = 50 V to 100 V 50 or 60 0.80 0.80 0.80 100 or 120 1.00 1.00 1.00 300 1.10 1.15 1.20 1000 1.15 1.25 1.35 3000 1.20 1.35 1.45 10 000 1.25 1.40 1.50 www.vishay.com 6 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28302 Revision: 11-Jul-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design - Alternative Series 153 CRV 153 CLV Aluminum Capacitors SMD (Chip) Long Life Vertical Vishay BCcomponents Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE Mounting IEC 60384-18, subclause 4.3 Endurance Useful life PROCEDURE (quick reference) REQUIREMENTS shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter "Mounting" C/C: 10 % IEC 60384-18/ CECC 32300, subclause 4.15 Tamb = 105 C; UR applied; 1000 h, case codes 0405 to 0605 2000 h, case codes 0807 to 1014 C/C: 20 % CECC 30301, subclause 1.8.1 Tamb = 105 C; UR and IR applied; 2000 h, case codes 0405 to 0605 3000 h, case codes 0807 to 1014 tan spec. limit IL2 spec. limit tan 2 x spec. limit IL2 spec. limit C/C: 50 % tan 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-18/ CECC 32300, subclause 4.17 Document Number: 28302 Revision: 11-Jul-12 Tamb = 105 C; no voltage applied; 1000 h for requirements see `Endurance test' above after test: UR to be applied for 30 min, 24 h to 48 h before measurement For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000