40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range 12 – 18 GHz
Insertion Loss (max) 3.9 dB
VSWR (max) 50 ohms 2.0 ratio
Isolation (min) 65 dB
Switching Speed (max) 100 nsec
CW RF Power, Operating (max) 0.5 W
Specifications:
Features:
• Incorporated TTL-compatible driver for
convenient system integration and operates
from +5V and -15V DC power supplies.
• DC blocks at all RF ports.
• Ruggedized construction.
• RoHS-compliant versions available.
• Hermetic versions available.
Revision Date: 1/25/2011
S6K2 Pin Diode Switch
Single Pole, Six Throw
Absorptive
Notes:
DC Bias: +5V +/-0.5V @ 240 mA max
(Standard) -15V +/-3V @ 50 mA max
DC Bias: +5V +/-0.5V @ 300 mA max
(-5 option) -5V +/-0.5V @ 60 mA max
DC Bias: +15V +/-3V @ 240 mA max
(-12 option) -15V +/-3V @ 50 mA max
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
E6 controls J7 – J1
Absorptive Switch: 50 ohm termination present at J2, J3, J4, J5, J6
and J7 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55 °C to +85 °C
Storage Temp: -65 °C to +125 °C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Mechanical Specifications:
Case Styles: S6 Outline (Six bit control)
S6-3 Outline (Three bit control)
Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
Weight: 65 g max
Mounting: ø0.10” through holes
(2) places
Three Bit Control:
(-3 option)
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
E3 E2 E1 Low Loss Path
0 0 0 J2 - J1
0 0 1 J3 - J1
0 1 0 J4 - J1
0 1 1 J5 - J1
1 0 0 J6 - J1
1 0 1 J7 - J1
1 1 0 ALL OFF
1 1 1 ALL OFF