Philips Semiconductors Product specification
Triacs BT136S series D
logic level BT136M series D
GENERAL DESCRIPTION QUICK REFERENCE DATA
Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. UNIT
triacsinaplasticenvelopesuitablefor
surface mounting, intended for use in BT136S (or BT136M)- 500D 600D
general purpose bidirectional VDRM Repetitive peak off-state 500 600 V
switching and phase control IT(RMS) voltages 4 4 A
applications. These devices are ITSM RMS on-state current 25 25 A
intended to be interfaced directly to Non-repetitive peak on-state current
microcontrollers, logic integrated
circuits and other low power gate
trigger circuits.
PINNING - SOT428 PIN CONFIGURATION SYMBOL
PIN Standard Alternative
NUMBER S M
1 MT1 gate
2 MT2 MT2
3 gate MT1
tab MT2 MT2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
-500 -600
VDRM Repetitive peak off-state - 50016001V
voltages
IT(RMS) RMS on-state current full sine wave; Tmb ≤ 107 ˚C - 4 A
ITSM Non-repetitive peak full sine wave; Tj = 25 ˚C prior to
on-state current surge
t = 20 ms - 25 A
t = 16.7 ms - 27 A
I2tI
2
t for fusing t = 10 ms - 3.1 A2s
dIT/dt Repetitive rate of rise of ITM = 6 A; IG = 0.2 A;
on-state current after dIG/dt = 0.2 A/µs
triggering T2+ G+ - 50 A/µs
T2+ G- - 50 A/µs
T2- G- - 50 A/µs
T2- G+ - 10 A/µs
IGM Peak gate current - 2 A
VGM Peak gate voltage - 5 V
PGM Peak gate power - 5 W
PG(AV) Average gate power over any 20 ms period - 0.5 W
Tstg Storage temperature -40 150 ˚C
TjOperating junction - 125 ˚C
temperature
1
2
3
tab
T1T2
G
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may
switch to the on-state. The rate of rise of current should not exceed 3 A/µs.
July 1997 1 Rev 1.000