Power TOPLED(R) Enhanced optical Power LED (ATON(R)) Lead (Pb) Free Product - RoHS Compliant LB E67C, LV E67C, LT E67C Released OS-PCN-2007-039-A Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: mehr Licht durch erhohten optischen Wirkungsgrad; hohere Umgebungstemperatur bei gleichem Strom im Vergleich zur TOPLED(R) moglich * Wellenlange: 469 nm (blau), 503 nm (verde), 525 nm (true green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 3 lm/W (blau), 10 lm/W (verde), 13 lm/W (true green) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 12 Features * package: white P-LCC-4 package, colorless clear resin * feature of the device: more light due to higher optical efficiency; higher ambient temperature at the same current possible compared to TOPLED(R) * wavelength: 469 nm (blue), 503 nm (verde), 525 nm (true green) * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 3 lm/W (blue), 10 lm/W (verde), 13 lm/W (true green) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 12 Anwendungen * Ampelanwendung (verde) * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u. a.) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten * Scanner Applications * traffic lights (verde) * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting, etc.) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire * scanners 2012-03-16 1 LB E67C, LV E67C, LT E67C Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 18 Lichtstrom2) Seite 18 Bestellnummer Type Color of Emission Luminous Intensity1) page 18 Luminous Flux2) page 18 Ordering Code IF = 30 mA IV (mcd) IF = 30 mA V (mlm) LB E67C-Q1R2-35 LB E67C-R1S2-35 LB E67C-Q1S2-35 blue 71 ... 112 ... 71 ... 180 280 280 380 (typ.) 600 (typ.) 520 (typ.) Q65110A1854 Q65110A1855 Q65110A1975 nLV E67C-T1U2-35 nLV E67C-U1V2-35 nLV E67C-T1V2-35 verde 280 ... 710 450 ... 1120 280 ... 1120 1500 (typ.) 2400 (typ.) 2100 (typ.) Q65110A1876 Q65110A1877 Q65110A1986 LT E67C-T1U2-35-1 LT E67C-U1V2-35-1 LT E67C-T1V2-35-1 true green 280 ... 710 450 ... 1120 280 ... 1120 1500 (typ.) 2400 (typ.) 2100 (typ.) Q65110A1868 Q65110A1869 Q65110A1982 n LV E67C abgekundigt nach OS-PD-2006-009 - wird durch LV T67C ersetzt werden. LV E67C obsolete acc. to OS-PD-2006-009 - will be replaced by LV T67C. Letzte Bestellung / Last Order: 15.04.2007 Letzte Lieferung / Last Delivery: 15.10.2007 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LB E67C-Q1R2-35 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen Q1, Q2, R1 oder R2 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LB E67C-Q1R2-35 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, oder -5 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LT E67C-T1U2-35-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -2, -3 oder -4 enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LB E67C-Q1R2-35 means that only one group Q1, Q2, R1 or R2 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LB E67C-Q1R2-35 means that only 1 wavelength group -3, -4, or -5 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LT E67C-T1U2-35-1 means that only 1 forward voltage group -2, -3 or -4 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable(see page 5 for explanation). 2012-03-16 2 LB E67C, LV E67C, LT E67C Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LB Einheit Unit LV, LT Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj Durchlassstrom Forward current (TA=25C) IF Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 18 Reverse voltage3) page 18 (TA=25C) VR 5 Leistungsaufnahme Power consumption (TA=25C) Ptot 135 mW Rth JA 350 K/W Rth JS 180 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 18 Junction/ambient4) page 18 Sperrschicht/Lotpad Junction/solder point 2012-03-16 3 + 110 + 125 30 300 400 C mA mA V LB E67C, LV E67C, LT E67C Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 30 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 18 Dominant wavelength5) page 18 IF = 30 mA Werte Values Einheit Unit LB LV LT peak 464 501 520 nm dom 469* 6 503* 6 525* 9 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 30 mA (typ.) 25 30 33 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung6) Seite 18 Forward voltage6) page 18 IF = 30 mA (min.) (typ.) (max.) VF VF VF 3.3 3.9 4.4 3.3 3.8 4.4 2.9 3.8 4.4 V V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 30 mA; -10C T 100C (typ.) TCpeak 0.05 0.03 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 30 mA; -10C T 100C (typ.) TCdom 0.04 0.05 0.05 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 30 mA; -10C T 100C (typ.) TCV - 5.0 - 3.6 - 3.6 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) opt 3 10 13 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2012-03-16 4 LB E67C, LV E67C, LT E67C Wellenlangengruppen (Dominantwellenlange)5) Seite 18 Wavelength Groups (Dominant Wavelength)5) page 18 Gruppe Group blue verde true green Einheit Unit min. max. min. max. min. max. 3 463 467 497 501 516 522 nm 4 467 471 501 505 522 528 nm 5 471 475 505 509 528 534 nm Durchlassspannungsgruppen6) Seite 18 Forward Voltage Groups6) page 18 Gruppe Group Durchlassspannung Forward voltage Einheit Unit true green min. max. 2 2.9 3.3 V 3 3.3 3.8 V 4 3.8 4.4 V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 Lichtstarke1) Seite 18 Luminous Intensity1) page 18 IV (mcd) 71 ... 90 90 ... 112 112 ... 140 140 ... 180 180 ... 224 224 ... 280 280 ... 355 355 ... 450 450 ... 560 560 ... 710 710 ... 900 900 ... 1120 Lichtstrom2) Seite 18 Luminous Flux2) page 18 V (mlm) 240 300 380 480 600 760 950 1200 1500 1900 2400 3000 (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. Note: The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 individual brightness groups. Individual brightness groups cannot be ordered. 2012-03-16 5 LB E67C, LV E67C, LT E67C Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S2-3 Example: S2-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength S2 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2012-03-16 6 LB E67C, LV E67C, LT E67C Relative spektrale Emission2) Seite 18 Relative Spectral Emission2) page 18 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 30 mA OHL00492 100 I rel % 80 V 60 blue verde true green 40 20 0 400 450 500 550 650 600 nm 700 Abstrahlcharakteristik2) Seite 18 Radiation Characteristic2) page 18 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-03-16 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LB E67C, LV E67C, LT E67C Durchlassstrom2) Seite 18 Forward Current2) page 18 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 18 Relative Luminous Intensity2) 7) page 18 IV/IV(30 mA) = f (IF); TA = 25 C OHL02619 10 2 mA IF 5 OHL00036 10 1 IV IV (30 mA) 10 1 10 0 5 5 verde true green blue blue verde, true green 10 0 10 -1 5 5 10 -1 1.5 2.5 3.5 4.5 10 -2 0 10 5.5 V 6.5 5 10 1 mA 10 2 IF VF 2) Seite 18 Relative Lichtstarke Relative Luminous Intensity2) page 18 IV/IV(25 C) = f (Tj); IF = 30 mA IV OHL02637 1.4 I V (25 C) 1.2 1.0 0.8 true green verde blue 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 C 100 Tj 2012-03-16 8 LB E67C, LV E67C, LT E67C Dominante Wellenlange2) Seite 18 Dominant Wavelength2) page 18 LT, dom = f (IF); TA = 25 C Dominante Wellenlange2) Seite 18 Dominant Wavelength2) page 18 LV, dom = f (IF); TA = 25 C OHL00882 550 nm OHL10198 512 nm dom dom 510 540 508 535 506 530 true green verde 504 525 502 520 500 515 510 0 20 40 60 80 498 mA 120 Dominante Wellenlange2) Seite 18 Dominant Wavelength2) page 18 LB, dom = f (IF); TA = 25 C OHL10196 dom 473 472 471 blue 470 469 468 467 0 20 40 60 80 mA 120 If 2012-03-16 20 40 60 80 mA 120 IF If 474 nm 0 9 LB E67C, LV E67C, LT E67C Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T ) OHL01309 35 mA IF OHL01308 35 mA 30 IF 25 30 25 blue blue verde, true green 20 verde, true green 20 15 15 10 10 5 5 TA temp. ambient 0 0 20 40 60 TS temp. solder point 0 80 C 100 T 2012-03-16 0 20 40 60 80 C 100 T 10 LB E67C, LV E67C, LT E67C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C, LB 0.35 IF A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C, LB OHL01953 0.35 IF A tP tP IF D= T T OHL01954 t tP IF D = TP T 0.25 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.10 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp Zulassige Impulsbelastbarkeit IF = f (tp) tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C, LT / LV Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C, LT / LV OHL01955 tP D= T 0.45 IF A tP IF 0.25 0.20 0.15 0.10 t D = TP tP IF T 0.35 0.30 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.25 0.20 0.15 0.10 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-03-16 OHL01956 T 0.35 0.30 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.05 0.45 IF A D= 0.20 11 LB E67C, LV E67C, LT E67C Mazeichnung8) Seite 18 Package Outlines8) page 18 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.8 (0.031) 0.6 (0.024) C C 1.1 (0.043) C C C 0.1 (0.004) typ Package marking 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) 3.4 (0.134) 3.0 (0.118) C A 41 0.7 (0.028) (2.4 (0.094)) A 0.9 (0.035) 0.18 (0.007) 0.6 (0.024) 0.4 (0.016) 0.12 (0.005) GPLY6991 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Gewicht / Approx. weight: 35 mg Gurtung / Polaritat und Lage8) Seite 18 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2012-03-16 12 Cathode/Collector Marking 8 (0.315) 2 (0.079) 1.75 (0.069) 4 (0.157) 3.5 (0.138) 1.5 (0.059) 3.6 (0.142) Method of Taping / Polarity and Orientation8) page 18 OHAY0536 LB E67C, LV E67C, LT E67C Empfohlenes Lotpaddesign verwendbar fur TOPLED(R) und Power TOPLED(R) Reflow Loten8) Seite 18 Recommended Solder Pad useable for TOPLED(R) and Power TOPLED(R) Reflow Soldering8) page 18 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2012-03-16 13 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LB E67C, LV E67C, LT E67C Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 50 0 100 150 200 250 s 300 t Anm.: Das Gehause ist nicht fur nasschemische Reinigung geeignet. Note: Package not suitable for wetcleaning. Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat* 25C to 150C 2 K/ s 3K/s Time ts from TSmin to TSmax (150C to 200C 100 s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2 K/ s 3K/s ) Liquidus Temperture TL 217C Time tL above TL 80 s max. 100 s Peak Temperature TP 245 C max. 260 C Time tP within 5C of the specified peak temperature TP - 5K 20 s min. 10 s max. 30 s Ramp-down Rate* TP to 100C 3K/s 6 K / s maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 s; fulfillment for the whole T-range 2012-03-16 14 LB E67C, LV E67C, LT E67C Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2012-03-16 15 LB E67C, LV E67C, LT E67C Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ist ale op se for > se , Mo ure 3 ist is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo Barcode label N RS ins VE ITI TO nta NSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label el M Y DE R 18 -1 -1 +Q P RO UP : G 4 01 4 98 C: 20 00 D/ 00 21 9 (9 D) 21 : H 12 34 O (Q )Q TY : S S em R ic AM o n O d u p ct to o H rs NO TC BA P) 5 14 2 (6 T 11 00 LO PR O D NO : (1 T) (X ) D EM Y 18 R -1 : Q + u L lt S iT Y O T6 P 7 L 6 P -1 G R O U P: (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR M 14 4 D /C :0 (9 D ) 0 00 TY :2 )Q (Q A 21 00 21 99 8 o M n O d u p cto to rs (X ) PR O D N O : (1 T) 11 00 LO T 14 2 N O 5 R 34 ic N O : H 12 G O S em S BA TC H 23 :1 (6 P) M RA OS Packing Sealing label 2012-03-16 23 G e Muster C (G ) M u L lt S iT Y O T6 P 7 L 6 E D Muster L Nns IVEORS ai IT ntNS CT TIO DU U g coSE ON Ais baRE IC M NO :1 E V E L selab . , H) nk de co (R bla r If ba . ity id RH m hu 0% e e /6 d tiv C re ag la re fra ck 30 _ < in pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or ThISTU th r pr < ll tim SE ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt ad Fl oo s ui be on if: re w ed l 4 5 Fl la m ide ce eq lo g, oc ve l vi is in en de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in an in Fl RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi 10 ba to et ar ks s Jel r th va Ye m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur M oi st ture M oi M ois M Q : -1 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Bi Bi n1 Bi n2 : Pn3 : 120 Barcode label 16 OHA02044 LB E67C, LV E67C, LT E67C Revision History: 2012-03-16 Previous Version: 2009-12-08 Page Subjects (major changes since last revision) Date of change 1, 2 verde obsolete acc. to OS-PD-2006-009 2006-10-04 all OS-PCN-2007-002-A 2007-01-31 all OS-PCN-2007-039-A 2007-10-31 1, 12 additional information 2009-12-08 14 OS-IN-2012-005 2012-03-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 18 may only be used in life-support devices or systems10) page 18 with the express written approval of OSRAM OS. 2012-03-16 17 LB E67C, LV E67C, LT E67C Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2012-03-16 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 18 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.