Fig.3
1
Miniature Waterproof Plastic Connectors
HR30 Series
Features
1. Small-size with low profile
3, 6 contacts : Maximum outer diameter Ø12.6mm
Mated length 32.3mm (from the
panel surface)
10, 12 contacts : Maximum outer diameter Ø15.5mm
Mated length 42.1mm (from the
panel surface)
These small, compact connectors offer unique
features available only from Hirose.
2. Waterproof construction
IP67 and 68 waterproof construction in the mated state
IP67 : Left submerged in water at a depth of 1m for 30 minutes
IP68 : Left submerged in water at a depth of 2m for 14 days
3. Push/pull lock
Waterproof connectors feature an easy to operate
push/pull locks developed with our exclusive
technology.
4. Light weight
3 and 6 contacts: 6g (plug + receptacle)
10 and 12 contacts: 9g (plug + receptacle)
5. Clamp structure
Our proprietary clamping method allows clamping
the cable by simply tightening the cord ring.
6. Easy mating operation
The plug can be securely locked while holding it in
your hand while mating. (Fig.2)
7. Mis-insertion prevention
Mating portions are polarized to avoid improper
mating and connector damage.
8. Mating mark
Both the plug and the receptacle feature a white
index mark on them which is used to quickly align
the two interfaces for proper mating.(Fig.3)
9. Complies with the RoHS requirements
In consideration of environmental issues, we use
only materials that comply with the RoHS Directive.
Push-pull- single action lock
Ø15.5
42.1
Ø12.6
32.3
3 and 6 pos.
10 and 12 pos.
Mated dimensions
Lock/release operation
Alignment marks
Polarized interface
Push-pull locking collar
Fig.1
Fig.2
2018.6⑤
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
Product Specifi cations
Ratings
Current rating 5A (3 pos.)
2A (6,10,12 pos.) Operation Temperature Range -25ç to +85ç
Voltage rating 100V AC,140V DC(3,6 pos.)
30V AC,42V DC(10,12 pos.) StorageTemperature Range -10ç to +60ç
Characteristic Specifi cation Conditions
1. Contact
resistance
5mø max. (3 pos.)
15mø max. (Solder type : 6, 10, and 12 pos.)
30mø max. (Through hole type: 6 and 12 pos.)
1A DC
2. Insulation
resistance 1000Mø min. 100V DC
3. Withstanding
voltage No fl ashover or insulation breakdown 300V AC / 1minute
4. Vibration No electrical discontinuity of 10µs or more Frequency : 10 to 55 Hz, single amplitude of 0.75mm,
1 cycle= 5min, 10 cycles in each of the 3 directions.
5. Durability
(mating/un-mating)
Contact resistance 10mø min.(3 pos.)
Contact resistance 30mø min. (Solder type: 6, 10, and 12 pos.)
Contact resistance 100mø min. (Through hole type: 6 and 12 pos.)
1000 cycles
6. Temperature
cycle Insulation resistance 100Mø min.
(-55ç : 30 minutes → Room temperature : 10 to 15
minutes → +85ç : 30 minutes → Room temperature :
10 to 15 minutes) for 5 cycles
7. Humidity
resistance
Insulation resistance
10Mø min. (when humidity high)
100Mø min. (when dry)
96 hours at temperature of 40ç and humidity of
90% to 95%
8. Waterproof
performance No water penetration inside. While mated with corresponding or protective cap
submerged at depth of 1m for half hour.
Material / Finish
Assembly Component Material Finish Remarks
Plug
Insulator
PPS Black UL94V-0
PBT Black UL94V-0
Polyacetal Natural ----------
Gasket Silicone rubber, chloroprene
rubber Red/Black ----------
Contacts Brass, phosphor bronze,
Copper compound metal Gold plated ----------
Spring Stainless steel ---------- ----------
Receptacles
Insulator PPS Black UL94V-0
Gasket Chloroprene rubber Black ----------
Contacts Brass, phosphor bronze,
Copper compound metal Gold plated ----------
Hexagonal nut Zinc alloy Chromate ----------
Washer Phosphor bronze Nickel plated ----------
Crimp contact
(male/female) Contacts Phosphor bronze Selective gold plated ----------
2
HR30 Series●Miniature Waterproof Plastic Connectors
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
HR30 - 6 P A - 6 S C (* *)
qwertyui
q Model name : HR30 t Number of Contacts : 3, 6, 10 and 12
y Contact type S : Female contact
P : Male contact
u Contact wiring type
Blank : Solder
C : Crimping
D : Through hole
i Other specifications:
A two-digit character is added to indicate other
specifications as needed.
w Shell size :
Outside diameter/plug mating side
e Connector type : P : Plug
Connector type : R : Receptacle
Connector type : J : Jack
r Variation
Blank : Standard
A : Fine wire
B : Over mold type
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
3
HR30 Series●Miniature Waterproof Plastic Connectors
Plugs
Crimp Type
Solder Type
Ø15.5
A(Fully tightened) Applicable
cable diameter
B
A(Fully tightened) Applicable
cable diameter
1
2
3
4
5
6
HR30-7P-12SC (71)
(Representative example)
(Representative example)
Shown with contacts installed.
HR30-6P-6S (31)
Part No. HRS No. A B
Applicable cable diameter range
Solder pot inner diameter Weight
HR30-6P-3S(31) 130-0004-1 31 29.8
12.6
4.2 to 5
1.1 mm
4g
HR30-6P-6S(31) 130-0010-4 31 0.8 mm
HR30-6P-6P(31) 130-0009-5 31 30.3
HR30-6PA-3S(71) 130-0021-0 71 29.8 3.5 to 4.3
1.1 mm
HR30-6PA-6S(71) 130-0019-9 71 0.8 mm
HR30-6PA-6P(71) 130-0020-8 71 30.3
HR30-7P-12S(71) 130-0027-7 71 39.8 15.5 6.2 to 7 0.6 mm 6.7g
HR30-8P-12P(71) 130-0026-4 71
Part No. HRS No. A
Applicable cable diameter range
Crimp contact Weight
HR30-7P-10SC(71) 130-0013-2 71
39.8 6.2 to 7 HR30-SC-211 6gHR30-7P-12SC(71) 130-0014-5 71
HR30-8P-12PC(71) 130-0015-8 71 HR30-PC-211
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
4
HR30 Series●Miniature Waterproof Plastic Connectors
Plug for overmolds
Crimp Type
Solder Type
25.9
Ø15.5
Ø6.4
A
ØB
ØC
Part No. HRS No. A B C Solder pot inner diameter Weight
HR30-6PB-3S 130-0034-2 22.7 12.6 5.2
1.1 mm 3.1g
HR30-6PB-6S 130-0032-7 0.8 mm 2.9g
HR30-6PB-6P 130-0037-0 23.2
HR30-7PB-12S 130-0035-5 25.9 15.5 6.4 0.6 mm 4.7g
HR30-8PB-12P 130-0030-1 4.5g
Part No. HRS No. Crimp contact Weight
HR30-7PB-10SC 130-0036-8 HR30-SC-211 4.1g
HR30-7PB-12SC 130-0033-0
HR30-8PB-12PC 130-0031-4 HR30-PC-211 4.3g
HR30-8PB-12PC
HR30-6PB-6S
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
5
HR30 Series●Miniature Waterproof Plastic Connectors
Receptacles
Solder Type
Gasket
B
C
A
D
E(Thread)
F(Hex nut)
1
2
34
5
6
HR30-6R-6P (71)
Through hole Type
HR30-8R-12SD (31)
D
C
A
B2
Through hole post
(0.2∞0.5)
E
F(Hex nut)
Gasket
Crimp Type
Ø11.5
Ø15
15.5
9.3 Gasket
M11X1(Thread)
13(Hex nut)
HR30-7R-12PC (31)
Shown with contacts installed.
Shown with contacts installed.
Part No. HRS No. A B C D E F Solder pot inner diameter Weight
HR30-6R-3P(71) 130-1003-4 71 16 8.3 12 8.9 M8∞0.75 10
1.1mm
2gHR30-6R-6P(71) 130-1009-0 71 0.8mm
HR30-6R-6S(71) 130-1008-8 71 18.4
HR30-7R-12P(31) 130-1016-6 31 18.6 9.3 15 11.5 M11∞1 13 0.6mm 3.4g
HR30-8R-12S(31) 130-1018-1 31
Part No. HRS No. Crimp contact Weight
HR30-7R-10PC(31) 130-1012-5 31 HR30-PC-211 3gHR30-7R-12PC(31) 130-1013-8 31
HR30-8R-12SC(31) 130-1014-0 31 HR30-SC-211
Part No. HRS No. A B C D E F Weight
HR30-6R-6PD(71) 130-1020-3 71 14.9 8.3 12 8.9 M8∞0.75 10 2g
HR30-6R-6SD(71) 130-1021-6 71 15.2
HR30-7R-12PD(31) 130-1017-9 31 16 9.3 15 11.5 M11∞1 13 3.4g
HR30-8R-12SD(31) 130-1019-4 31
(Representative example)
(Representative example)
(Representative example)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
6
HR30 Series●Miniature Waterproof Plastic Connectors
Jacks
Crimp Type
Solder Type
37.3
Ø15
(Fully tightened) Applicable
cable diameter
B(Fully tightened)
A
1
2
34
5
6
Applicable
cable diameter
HR30-7J-12PC (71)
HR30-6J-6P (31)
Shown with contacts installed.
Part No. HRS No. A B
Applicable cable diameter range
Solder pot inner diameter Weight
HR30-6J-6P(31) 130-2009-6 31 12 28.8 4.2 to 5 0.8 mm 3g
HR30-6JA-6P(71) 130-2018-7 71 3.5 to 4.3
HR30-7J-12P(71) 130-2020-9 71 15 37.3 6.2 to 7 0.6 mm 5.7g
HR30-8J-12S(71) 130-2019-0 71 5.9g
Part No. HRS No. Applicable cable diameter range Crimp contact Weight
HR30-7J-10PC(71) 130-2015-9 71
6.2 to 7 HR30-PC-211 5gHR30-7J-12PC(71) 130-2017-4 71
HR30-8J-12SC(71) 130-2016-1 71 HR30-SC-211
(Representative example)
(Representative example)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
7
HR30 Series●Miniature Waterproof Plastic Connectors
Part No. HRS No. A B C Solder pot inner diameter Weight
HR30-6JB-3P 130-2029-0 12.7
21.7 5.2
1.1mm 2.3g
HR30-6JB-6P 130-2021-1 12 0.8mm 2.2g
HR30-6JB-6S 130-2028-0 12.7 2.3g
HR30-7JB-12P 130-2023-7 15 23.7 6.4 0.6mm 3.6g
HR30-8JB-12S 130-2024-0 4.1g
Part No. HRS No. Crimp contact Weight
HR30-7JB-10PC 130-2025-2 HR30-PC-211 3.1gHR30-7JB-12PC 130-2022-4
HR30-8JB-12SC 130-2026-5 HR30-SC-211
Jack for overmolds
Crimp Type
Solder Type
Ø15
23.7
Ø6.4
A
B
C
HR30-6JB-6P
HR30-8JB-12SC
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
8
HR30 Series●Miniature Waterproof Plastic Connectors
Part No. HRS No. A B C D E Applicable cable diameter Weight
HR30-6P-C(31) 130-3000-7 31 13 8.4 8.9 4 8.8 Ø4.2 to 5 1g
HR30-7P-C(31) 130-3004-8 31 16 10.4 10.5 6 11.4 Ø6.2 to 7 2g
HR30-8P-C(31) 130-3003-5 31
Part No. HRS No. A B C D E Remarks Weight
HR30-6R-C(31) 130-3001-0 31 12.6 11.8 7.5 12.1 9.1
1g
HR30-7R-C(31) 130-3002-2 31 15.5 14.8 8.5 15 12.1
This cap fi ts each size of
the HR30-7R and HR30-8R
receptacles
Note : When using these caps, do not use the gasket that is normally supplied with the receptacle.
The “B” diameter end of the receptacle cap will serve as the gasket.
Caps
For Receptacle
For Plugs
1.40.9
ØE
CØA
ØB
ØD
11.4
CØA
ØB
ØD
ØE
HR30-6R-C (31)
HR30-6P-C (31)
(Representative example)
(Representative example)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
9
HR30 Series●Miniature Waterproof Plastic Connectors
Note : Use wire size 26 to 30 AWG with a jacket diameter of 1 mm max.
Crimp Contacts
Diagrams of Connectors in Combination
0.82
11
1.15
1.2
A-A cross-section
A
A
0.82
11
1.15
1.2
A
A
A-A cross-section
Plugs
HR30-*P-**(71)
Caps for Plug
HR30-*P-C(71)
Receptacles
HR30-*R-**(71)
Jacks
HR30-*J-**(71)
Caps for Receptacle
HR30-*R-C(71)
Cap mounting diagram
Cable
Cap Cap
Panel
Male contact Female contact
Note 1 : Please use connectors with compatible shell size and number of contacts. If you are using a male contact plug, please also
use a corresponding product with a female receptacle and a jack.
Note 2 : Please install the applicable crimping contacts when using the crimping style connectors.
(Please refer to the manual for wiring work.)
Note 3 : When using the cap on the receptacle side, do not use the gasket that is normally supplied with the receptacle. The Hirose
cap has the necessary gasket as part of the cap unit.
Type Part No. HRS No. Packaging
type Weight
Loose contact
HR30-PC-111 130-0022-3 100pcs/pack 0.03g/1 pin
Reel contact HR30-PC-211 130-0016-0 10,000pcs/reel 0.03g/1 pin
Type Part No. HRS No. Packaging
type Weight
Loose contact
HR30-SC-111 130-0023-6 100pcs/pack 0.03g/1 pin
Reel contact HR30-SC-211 130-0017-3 10,000pcs/reel 0.03g/1 pin
(Representative example) (Representative example)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
10
HR30 Series●Miniature Waterproof Plastic Connectors
Solder termination fixture Back shell tightening collar
HR30-6P-6S-T01 HR30-6R-6P-T01 HR30-6P-T02
Applicable Tools
Cable Assembly Tools
Part No. HRS No.
Applicable Connectors
Shell size Connector type No. of contacts Contact type
HR30-6P-3S-T01 150-0220-1
6 Plug
3 Female
HR30-6P-6S-T01 150-0214-9 6Female
HR30-6P-6P-T01 150-0221-4 Male
HR30-7P-10SC-T01 150-0228-3 7 Plug 10 Female
HR30-7P-12SC-T01 150-0223-0 12 Female
HR30-8P-12PC-T01 150-0227-0 8 Plug 12 Male
HR30-6R-3P-T01 150-0225-5
6Receptacle
Jack
3 Male
HR30-6R-6P-T01 150-0218-0 6Male
HR30-6R-6S-T01 150-0222-7 Female
HR30-7J-10PC-T01 150-0231-8 7Receptacle
Jack
10 Male
HR30-7J-12PC-T01 150-0230-5 12 Male
HR30-8J-12SC-T01 150-0226-8 8 Female
Note : Wiring for soldering or disassembly and assembly of plugs and jacks can be accomplished more effi ciently when using
the cable assembly tool.
Tightening collar for back shell
Part No. HRS No. Applicable Connectors
HR30-6P-T02 150-0216-4 3 and 6 contacts
HR30-8P-T02 150-0224-2 10 and 12 contacts
Note : The code ring tightening collar is used to tighten the cord ring to the specifi ed torque.
(Please refer to the manual for assembly procedures.)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
11
HR30 Series●Miniature Waterproof Plastic Connectors
Contact Position Arrangement Panel Cutout
Remarks : 1. The contact arrangement depicts a view from the wiring side.
2. Installation is accomplished by securing the receptacle from the back side of the panel using the supplied hexagon
nut. The tightening torque of the hexagon nut should be 0.5 N·m for 3, 6 contacts, and 0.8 N·m for 10, 12 contacts.
In addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo.
1
2
31
2
34
5
6
6
1
2
3
4
5
12
4567
89
10
1211
312
4567
89
10
12 11
3
123
4567
89
10
HR30-7P-10SC(**)HR30-7P-12SC(**)HR30-8P-12PC(**)
HR30-6P-6P(**)
HR30-6P-6S(**)
HR30-6P-3S(**)
Alignment mark Alignment mark
B+0.05
0
A+0.05
0
D+0.05
0
ØC +0.05
0
Manual contact crimping tool HT-102/HR30-1
Automatic contact crimping machine CM-105C
Contact extraction tool HR30-TP
Receptacle, Board Mounting Through Hole Pattern
Remark : 1. The receptacle through hole confi guration depicts a view from the mating side of the connector.
2.The above Δ mark indicates the guide key position.
3.The recommended board maximum thickness :1.2mm.
4. Tolerance of +0.03mm is recommended for the plated through hole location. Tolerance of +0.02mm is recommended
for the plated through hole diameter.
7R-12PD 8R-12SD
1.44 1.44
0.48
0.87
2.22 1.83
0.72 0.72
12-Ø0.65
2.16 2.16
12 11
10 8
74
31
6R-6SD
1
5
42
6
3
0.9 0.9
1.521.52
0.49
1.35
1.6
6-Ø0.65
6R-6PD
1.56
1.56
0.9 0.9
1.8 1.8
6-Ø0.65
1
2
34
5
6
0.9 0.9
1.44 1.44
0.48
0.87
2.22 1.83
0.72 0.72
12-Ø0.65
2.16 2.16
11 12
810
47
13
Applicable Tools
Type Description Part No. HRS No. Applicable contact Applicable wire
Manual Manual crimping tool HT-102/HR30-1 150-0229-6 HR30-SC-111 AWG26 to 30
HR30-PC-111
Automatic
Automatic crimping machine CM-105C 901-0001-0 –––––– ––––––
Applicator AP105-HR30-1 901-2015-9 HR30-SC-211 AWG26 to 30
HR30-PC-211
Extraction tool HR30-TP 150-0219-2
HR30-SC-111 ––––––
HR30-SC-211
HR30-PC-111 ––––––
HR30-PC-211
ABCD
Panel
Thishness
3,6 pos. 1.25 6.45 8.05 3.95 0.7 to 2
10,12 pos. 1.35 9.25 11.05 5.45 0.7 to 3
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
12
HR30 Series●Miniature Waterproof Plastic Connectors
Assembly Procedures
Solder termination fixture
Insulator/contact assemblyBlock end face
Plug Assembly Sequence
1
2
Insert the cable in the following order : 1. Back shell, 2. cord clamp, 3. gasket, 4, spring and 5. locking collar.
Prepare the cable end according to the dimensions shown in Table 1.
Note : When preparing the cable, use caution not to damage the insulation and conductors of the lead wires.
Solder type
Fix the P case block on the cable termination tool, and after preliminary soldering, solder for 3 to 4 seconds with
the soldering iron at 350±10ç.
Note 1 : Take care to avoid creating cold solder joints and solder joints with voids or air holes in it.
Also check to make sure the solder joint is adequately fused between the lead wires and solder cup.
Note 2 : The P case block is a precision unit. Please use caution when soldering the P case block so it does not
become damaged. Any damage could result in loss of the waterproof performance.
Crimp type
After crimping the appropriate contact to the cable lead wire, insert the terminated wire into the correct contact
position on the P case block.
Note : After inserting the crimping wire/contact, slightly pull the lead wire and check if the crimping contact is
properly seated into the P case block.
A B
Solder type : 3 and 6 Contacts.
Solder type : 12 Contacts.
Crimp type : 10 and 12 Contacts.
2mm
2mm
2-0
-0.5 mm
5.5mm max.
10mm max.
15 to 20mm
B
Seal bushing
Strain relief
Back shell
Insulator/contact assembly
Cable
Spring
Push/pull locking collar
A
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
13
HR30 Series●Miniature Waterproof Plastic Connectors
3
A
Push/pull
locking collar
Guide keys
Cable
Cable Solder termination fixture
Tightening collar for back shell
(Refer to Table-2)
Cable
Back shell
Fixation
Plug insulator body
View A (2:1)
Front edge of cable jacket
Fig.B Fig.C
Groove - sealing bushing
Insert the cable by fitting the coupling guide to the wire-connected P case block.
Then, pass the cable through and assemble in the following order: 1. spring, gasket, 2 cord clamp, and 3. cord tube.
Make sure when assembling it with the cord clamp and cord tube, to maintain the positional relations between the
cable sheath end face and the concave area of the gasket as shown in Fig.B.
Note : Please install the cord tube using the cord tube tightening tool with the cord ring tightening torque shown in
Table-2.
ln addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured
by Henkel Japan Ltd., Tokyo.
When screwing in the cord tube, use your hand to hold the cable so that the cable will not rotate or twist
and apply stress to the soldered wires. However, as the cable tends to be twisted slightly (just over one
rotation), we recommend that you twist it in the opposite direction in advance.
Back shell tightening collar size
Torque
3 and 6 Contacts.
10 and 12 Contacts.
16mm
18mm
0.5N.m
0.5N.m
Connector
Table-2
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
14
HR30 Series●Miniature Waterproof Plastic Connectors
Points to note when using Heat shrink tubing
We recommend that you use shrink tubing over the solder connections in order to protect the soldered wires and to
enhance insulation. However, please be careful when applying heat in this area when installing the shrink tube so
excess heat does not bleed into or affect the resin parts as shown in the figure below.
If the product does become heated beyond the area shown and into the resin parts, please make sure to prevent the
following.
q Deformation of the C ring. This could result in prevention of locking during mating.
w Melting of some parts.
To prevent the deformation of the C rings of the receptacles and the jack, we recommend heat to be applied after
mating with a compatible plug.
Before heating, please mate the plug in the receptacle securely, then pull the back shell for checking whether it is
locked properly. If it is heated with semi-fitting, C ring may be thermally deformed with shrinking condition and it may
not be locked properly.
C ring
Shrinkable tube
Heat application area
Receptacle
Compatible plug
Back shell Heat application area
Mated dimensions
Receptacle
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
15
HR30 Series●Miniature Waterproof Plastic Connectors
General usage notes
Precautions
1. Mating 2. Un-mating
When mounting, smooth mating will be achieved by holding
plug in any are “A” and aligning the arrow of the plug with
that of the receptacle, then pushing the plug straight in.
When removing the plug from its connected condition, hold
the plug by push/pull locking collar (area “B”) and pull
straight off.
D
C
Alignment marks
C
D
Receptacle
Mounting panel
Plug Cable
A
B
Push/pull locking collar
Mounting panel
Cable
1. Make sure the power is off before mating or un-mating the connector.
2. When mating the connector, push it on with a force of a least 30N.
After mating, pull slightly on the connector to check for proper mating and to ensure the connector is fi rmly locked to
the receptacle.
3. After mating the connector, do not apply a force over 30N to the cable in the directions shown by the arrows. An
excessive load can lead to connector damage.
4. To maintain the waterproof performance, cable clamping force and cable stability, please use a cable within the
recommended for cable diameters.
Because the performance will differ depending on the cable structure, make sure to check all specifi cations of the
cable assembly before use or production.
5. Please assemble and install the connector and components with the specifi ed tightening torque.
If the tightening torque is too weak or too strong, loosening or breakage can occur.
6.Please contact Hirose if your application requires compliance with the Electrical Appliance and Meterial Safety Act.
Panel
30N max.
30N max.
30N max.
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
16
HR30 Series●Miniature Waterproof Plastic Connectors
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
USA:
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
Phone : +1-978-662-5255
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
CHINA:
HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
KOREA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
FRANCE:
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
130 Avenue Joseph Kessel, Bat E, 78960
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
CHINA:
HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS)
18, Enterprise Center Tower 2, 209# Gong He
Road, Jing’an District, Shanghai, CHINA 200070
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7355
http://www.hirose.com/tw/
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/hk/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower,
Singapore 079909
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose.com/sg/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
MALAYSIA:
PENANG REPRESENTATIVE OFFICE
73-3-1, Ideal@The One, Jalan Mahsuri, Bayan
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
http://www.hirose.com/sg/
THAILAND:
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
