Revised June 2001 74LVQ08 Low Voltage Quad 2-Input AND Gate General Description Features The LVQ08 contains four, 2-input AND gates. Ideal for low power/low noise 3.3V applications Guaranteed simultaneous switching noise level and dynamic threshold performance Guaranteed pin-to-pin skew AC performance Guaranteed incident wave switching into 75 Ordering Code: Order Number Package Number Package Description 74LVQ08SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LVQ08SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names (c) 2001 Fairchild Semiconductor Corporation Description An, Bn Inputs On Outputs DS011344 www.fairchildsemi.com 74LVQ08 Low Voltage Quad 2-Input AND Gate February 1992 74LVQ08 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) -0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage (VCC) 2.0V to 3.6V VI = -0.5V -20 mA Input Voltage (VI) 0V to VCC VI = VCC + 0.5V +20 mA Output Voltage (VO) 0V to VCC DC Input Voltage (VI) -0.5V to VCC + 0.5V Minimum Input Edge Rate (V/t) VO = -0.5V -20 mA VIN from 0.8V to 2.0V VO = VCC + 0.5V +20 mA VCC @ 3.0V DC Output Voltage (VO) 125 mV/ns -0.5V to VCC + 0.5V DC Output Source Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. 50 mA or Sink Current (IO) DC VCC or Ground Current 200 mA (ICC or IGND ) Storage Temperature (TSTG) -40C to +85C Operating Temperature (TA) DC Output Diode Current (IOK) -65C to +150C Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Latch-Up Source or 100 mA Sink Current DC Electrical Characteristics Symbol VIH Parameter Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage VOL Maximum Low Level Output Voltage IIN Maximum Input Leakage Current VCC TA = +25C TA = -40C to +85C Typ 3.0 1.5 2.0 2.0 V 3.0 1.5 0.8 0.8 V 3.0 2.99 3.0 3.0 0.002 Guaranteed Limits Units (V) 2.9 2.9 V 2.58 2.48 V 0.1 0.1 V 3.0 0.36 0.44 V 3.6 0.1 1.0 A Conditions VOUT = 0.1V or VCC - 0.1V VOUT = 0.1V IOUT = -50 A VIN = VIL or VIH (Note 3) IOH = -12 mA IOUT = 50 A VIN = VIL or VIH (Note 3) IOL = 12 mA VI = VCC, GND IOLD Minimum Dynamic 3.6 36 mA VOLD = 0.8V Max (Note 5) IOHD Output Current (Note 4) 3.6 -25 mA VOHD = 2.0V Min (Note 5) ICC Maximum Quiescent 20.0 A Supply Current VOLP Quiet Output Maximum Dynamic VOL VOLV Quiet Output Minimum Dynamic VOL VIHD Maximum High Level Dynamic Input Voltage VILD Maximum Low Level Dynamic Input Voltage 3.6 2.0 VIN = VCC or GND 3.3 0.4 0.8 V (Note 6)(Note 7) 3.3 -0.4 -0.8 V (Note 6)(Note 7) 3.3 1.8 2.0 V (Note 6)(Note 8) 3.3 1.8 0.8 V (Note 6)(Note 8) Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: Incident wave switching on transmission lines with impedances as low as 75 for commercial temperature range is guaranteed for 74LVQ. Note 6: Worst case package. Note 7: Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V; one output at GND. Note 8: Max number of Data Inputs (n) switching. (n - 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD), f = 1 MHz. www.fairchildsemi.com 2 TA = +25C Symbol tPLH tPHL Parameter Propagation Delay Propagation Delay tOSHL Output to Output Skew tOSLH (Note 9) TA = -40C to +85C CL = 50 pF VCC CL = 50 pF (V) Min Typ Max Min Max 2.7 1.5 9.0 13.4 1.0 14.0 3.3 0.3 1.5 7.5 9.5 1.0 10.0 2.7 1.5 8.4 12.0 1.0 13.0 3.3 0.3 1.5 7.0 8.5 1.0 9.0 2.7 1.0 1.5 1.5 3.3 0.3 1.0 1.5 1.5 Units ns ns ns Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC = Open Conditions CPD (Note 10) Power Dissipation Capacitance 17 pF VCC = 3.3V Note 10: CPD is measured at 10 MHz. 3 www.fairchildsemi.com 74LVQ08 AC Electrical Characteristics 74LVQ08 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 74LVQ08 Low Voltage Quad 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com