PhotoMOS.book Page 144 Thursday, March 26, 2009 2:21 PM GU-E 2 Form B (AQW414EH) TESTING Normally closed DIP8-pin economic type with reinforced insulation 6.4 .252 9.86 .388 3.2 .126 6.4 .252 9.86 .388 2.9 .114 mm inch 1 8 2 7 3 6 4 5 Compliance with RoHS Directive GU-E 2 Form B (AQW414EH) FEATURES TYPICAL APPLICATIONS 1. Reinforced insulation of 5,000 V More than 0.4 mm internal insulation distance between inputs and outputs. Con-forms to EN41003, EN60950 (reinforced insulation). 2. Applicable for 2 Form B use as well as two independent 1 Form B use 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. High sensitivity and high speed response Can control max. 0.13 A load current with 5 mA input current. Fast operation speed of typ. 0.8 ms. 5. Low-level off state leakage current * Modem * Telephone equipment * Security equipment * Sensing equipment TYPES Part No. Output rating* I/O isolation voltage AC/DC dual use Reinforced 5,000 V Package Load voltage Load current 400 V 100 mA Through hole terminal Tube packing style DIP8-pin AQW414EH Packing quantity Surface-mount terminal AQW414EHA Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW414EHAX AQW414EHAZ Tube Tape and reel 1 tube contains : 40 pcs. 1 batch contains: 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator "A" and the packing style indicator "X" or "Z" are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW414EH(A) 50mA 5V 1A 75mW 400 V Continuous load current IL 0.1 A (0.13 A) Ipeak Pout PT Viso 0.3 A 800mW 850mW 5,000 V AC -40C to +85C -40F to +185F Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Topr Tstg Remarks f =100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1 channel. 100 ms (1 shot), VL= DC Non-condensing at low temperatures -40C to +100C -40F to +212F All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 145 Thursday, March 26, 2009 2:21 PM GU-E 2 Form B (AQW414EH) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage On resistance Off state leakage current IFon VF Ron Maximum Operate (OFF) time* Reverse (ON) time* I/O capacitance Initial I/O isolation resistance AQW414EH(A) 1.3mA 3.0mA 0.4mA 1.2mA 1.25 (1.14 V at IF=5mA) 1.5V 26 IFoff Maximum Output Transfer characteristics Typical Maximum Minimum Typical Typical Maximum Typical IL=Max. IL=Max. IF=50mA IF=0mA IL=Max. Within 1 s on time IF=5mA VL=Max. 35 ILeak Typical Maximum Typical Maximum Typical Maximum Minimum Condition 10A 0.8ms Toff IF=0mA5mA IL=Max. 3.0ms 0.2ms Ton IF=5mA0mA IL=Max. 1.0ms 0.8pF Ciso f =1MHz VB =0V 1.5pF 1,000M Riso 500V DC *Operate/Reverse time Input Output 10% 90% Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value 5 to 10 Unit mA For Dimensions For Schematic and Wiring Diagrams For Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Using only 1 channel 100 Using 2 channels 3 Operate (OFF) time, ms 150 50 On resistance, Load current, mA 200 40 30 20 2.5 2 1.5 1 50 10 0 -40 -20 0 20 40 60 8085 100 Ambient temperature, C 0 0.5 -40 -20 0 20 40 60 8085 0 -40 Ambient temperature, C All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. -20 0 20 40 60 Ambient temperature, C 8085 PhotoMOS.book Page 146 Thursday, March 26, 2009 2:21 PM GU-E 2 Form B (AQW414EH) 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 0.6 0.4 5 LED turn off current, mA LED operate current, mA Reverse (ON) time, ms 0.8 4 3 2 4 3 2 0.2 1 0 -40 -20 0 20 40 60 0 8085 1 -40 -20 0 20 40 60 0 8085 -40 -20 Ambient temperature, C Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics; 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 140 120 100 80 60 40 20 -5 -4 -3 -2 -1 1.4 1.3 1.2 1.1 1.0 0 1 2 3 4 -20 Voltage, V -40 -60 -80 -100 -120 -140 50mA 30mA 20mA 10mA 5mA -40 -20 0 20 40 60 8085 Ambient temperature, C Off state leakage current, A Current, mA LED dropout voltage, V 1.5 5 10 -3 10 -6 10 -9 10 -12 0 20 40 60 80 Load voltage, V 100 10. Operate (OFF) time vs. LED forward current characteristics 11. Reverse (ON) time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 2.5 2 1.5 Output capacitance, pF 3 Reverse (ON) time, ms Operate (OFF) time, ms 120 0.5 3.5 0.4 0.3 0.2 1 0.1 0 0 10 20 30 40 50 LED forward current, mA 60 80 60 40 20 0.5 0 100 0 10 20 30 40 50 60 0 0 10 20 LED forward current, mA All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 30 40 50 Applied voltage, V 60