AQW414EHAX - Panasonic - Datasheet.Directory

GU-E 2 Form B (AQW414EH)

TYPES

*Indicate the peak AC and DC values.

Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the relay.

RATING

1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)

Normally closed DIP8-pin

economic type with

reinforced insulation GU-E 2 F orm B

(AQW414EH)

I/O isolation

voltage

Output rating*

Package

Part No. Packing quantity

Through hole

terminal Surface-mount terminal

Load

voltage Load

current Tube packing style Tape and reel packing style Tube Tape and reel

Pick ed from the

1/2/3/4-pin side Pick ed from the

5/6/7/8-pin side

AC/DC

dual use Reinforced

5,000 V 400 V 100 mA DIP8-pin AQW414EH AQW414EHA AQW414EHAX A QW414EHAZ

1 tube contains :

40 pcs.

1 batch contains:

400 pcs.

1,000 pcs.

Item Symbol AQW414EH(A) Remarks

Input

LED forward current IF50mA

LED reverse voltage VR5V

Peak forward current IFP 1A f =100 Hz, Duty factor = 0.1%

Power dissipation Pin 75mW

Output

Load voltage (peak AC) VL400 V

Continuous load current IL0.1 A (0.13 A) Peak AC, DC

( ): in case of using only 1 channel.

Peak load current Ipeak 0.3 A 100 ms (1 shot), VL= DC

Power dissipation Pout 800mW

Total power dissipation PT850mW

I/O isolation voltage Viso 5,000 V A C

Temperature

limits Operating Topr –40°C to +85°C –40°F to +185°FNon-condensing at low temperatures

Storage Tstg –40°C to +100°C –40°F to +212°F

TESTING

mm inch

FEATURES

1. Reinforced insulation of 5,000 V

More than 0.4 mm internal insulation

distance between inputs and outputs.

Con-forms to EN41003, EN60950

(reinforced insulation).

2. Applicable for 2 Form B use as well

as two independent 1 Form B use

3. Controls low-level analog signals

PhotoMOS relays feature extremely low

closed-circuit offset voltage to enable

control of low-le vel analog signals without

distortion.

4. High sensitivity and high speed

response

Can control max. 0.13 A load current with

5 mA input current. Fast operation speed

of typ. 0.8 ms.

5. Low-level off state leakage current

TYPICAL APPLICATIONS

• Modem

• Telephone equipment

• Security equipment

• Sensing equipment

3.2

6.4

9.86

2.9

6.4

9.86

.126

.252

.388

.114

.252

.388

Compliance with RoHS Directive

PhotoMOS.book Page 144 Thursday, March 26, 2009 2:21 PM

GU-E 2 Form B (AQW414EH)

2. Electrical characteristics (Ambient temperature: 25°C 77°F)

*Operate/Reverse time

RECOMMENDED OPERATING CONDITIONS

Please obey the following conditions to ensure proper relay operation and resetting.

■ For Dimensions

■ For Schematic and Wiring Diagrams

■ For Cautions for Use

■ These products are not designed for automotive use.

If you are considering to use these products for automotive applications, please contact your local Panasonic Electric

Works technical representative.

For more information

REFERENCE DATA

Item Symbol AQW414EH(A) Condition

Input

LED operate (OFF) current Typical IFoff 1.3mA IL=Max.

Maximum 3.0mA

LED reverse (ON) current Minimum IFon 0.4mA IL=Max.

Typical 1.2mA

LED dropout voltage Typical VF1.25 (1.14 V at IF=5mA) IF=50mA

Maximum 1.5V

Output On resistance Typical Ron 26ΩIF=0mA

IL=Max.

Within 1 s on time

Maximum 35Ω

Off state leakage current Maximum ILeak 10µAIF=5mA

VL=Max.

Transfer

characteristics

Operate (OFF) time* Typical Toff 0.8ms IF=0mA➝5mA

IL=Max.

Maximum 3.0ms

Reverse (ON) time* Typical Ton 0.2ms IF=5mA➝0mA

IL=Max.

Maximum 1.0ms

I/O capacitance Typical Ciso 0.8pF f =1MHz

VB =0V

Maximum 1.5pF

Initial I/O isolation resistance Minimum Riso 1,000MΩ500V DC

Item Symbol Recommended value Unit

Input LED current IF5 to 10 mA

Toff

Input

Output 10%

90%

Ton

1. Load current vs. ambient temperature

characteristics

Allowable ambient temperature: –40°C to +85°C

–40°F to +185°F

2. On resistance vs. ambient temperature

characteristics

Measured portion: between terminals 5 and 6, 7 and 8;

LED current: 0 mA; Load voltage: Max. (DC);

Continuous load current: Max. (DC)

3. Operate (OFF) time vs. ambient temperature

characteristics

LED current: 5 mA; Load voltage: Max. (DC);

Continuous load current: Max. (DC)

200

150

100

0 20 40 60–20

8085

100–40 Ambient temperature, °C

Load current, mA

Using only 1 channel

Using 2 channels

–40

0–20 20 40 60

8085

Ambient temperature, °C

On resistance, Ω

0.5

1.5

2.5

–40

0–20 20 40 60

8085

Ambient temperature, °C

Operate (OFF) time, ms

PhotoMOS.book Page 145 Thursday, March 26, 2009 2:21 PM

GU-E 2 Form B (AQW414EH)

4. Reverse (ON) time vs. ambient temperature

characteristics

LED current: 5 mA; Load voltage: Max. (DC);

Continuous load current: Max. (DC)

5. LED operate current vs. ambient

temperature characteristics

Load voltage: Max. (DC);

Continuous load current: Max. (DC)

6. LED turn off current vs. ambient temperature

characteristics

Load voltage: Max. (DC);

Continuous load current: Max. (DC)

0.2

0.4

0.6

–40

0.8

0–20 20 40 60

8085

Ambient temperature, °C

Reverse (ON) time, ms

–40

0–20 20 40 60

8085

Ambient temperature, °C

LED operate current, mA

–40

0–20 20 40 60

8085

Ambient temperature, °C

LED turn off current, mA

7. LED dropout voltage vs. ambient

temperature characteristics;

LED current: 5 to 50 mA

8. Current vs. voltage characteristics of output

at MOS portion

Measured portion: between terminals 5 and 6, 7 and 8;

Ambient temperature: 25°C 77°F

9. Off state leakage current vs. load voltage

characteristics

Measured portion: between terminals 5 and 6, 7 and 8;

Ambient temperature: 25°C 77°F

0–20–40 20 40 60

8085

1.5

1.4

1.3

1.2

1.1

1.0

50mA

30mA

20mA

10mA

5mA

Ambient temperature, °C

LED dropout voltage, V

–5 –3

–20

–40

–60

–80

–100

–120

–140

–2–4 24

–1

Voltage, V

Current, mA

140

120

100

060 100

20 40 80

10–3

10–6

10–9

10–12

Load voltage, V

Off state leakage current, A

10. Operate (OFF) time vs. LED forward

current characteristics

Measured portion: between terminals 5 and 6, 7 and 8;

Load voltage: Max. (DC); Continuous load current:

Max. (DC); Ambient temperature: 25°C 77°F

11. Re v erse (ON) time vs. LED forward current

characteristics

Measured portion: between terminals 5 and 6, 7 and 8;

Load voltage: Max. (DC); Continuous load current:

Max. (DC); Ambient temperature: 25°C 77°F

12. Output capacitance vs. applied voltage

characteristics

Measured portion: between terminals 5 and 6, 7 and 8;

Frequency: 1 MHz; Ambient temperature: 25°C 77°F

0.5

1.5

2.5

3.5

10 200 30 40 50 60

LED forward current, mA

Operate (OFF) time, ms

0.1

0.2

100 20 30 40

0.5

50 60

0.4

0.3

LED forward current, mA

Reverse (ON) time, ms

120

100

10 20 30 40 50 60

0Applied voltage, V

Output capacitance, pF

PhotoMOS.book Page 146 Thursday, March 26, 2009 2:21 PM