SUBMINIATURE SOLID STATE LAMP AM2520MBC03 Features BLUE Description !SUBMINIA TURE PACKAGE. The Blue source color devices are made with GaN on !WIDE VIEWING ANGLE. SiC Light Emitting Diode. ! GULL WING LEAD. Static electricity and surge damage the LEDS. It is ! LONG recommended to use a wrist band or anti-electrostatic ! LOW LIFE - SOLID STATE RELIABILITY. PACKAGE PROFILE. ! PACKAGE glove when handling the LEDs. : 1000PCS / REEL. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO:DSAD1261 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/27/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide Dic e Par t No . AM2520MBC03 Iv (m c d ) @ 20 m A L en s Ty p e BLUE (GaN) V i ew i n g An g l e Min . Ty p . 21/2 18 60 20 WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er peak Peak Wavelength Blue D Dominate Wavelength 1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 43 0 nm I F =20mA Blue 466 nm I F =20mA Spectral Line Half-width Blue 60 nm I F =20mA pF VF=0V;f=1MHz 4.5 V I F =20mA 10 uA V R = 5V C Capacitance Blue 100 VF Forward Voltage Blue 3.8 IR Reverse Current Blue Max . Absolute Maximum Ratings at T)=25C P ar am e t e r B lu e Un it s Power dissipation 10 5 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating /Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAD1261 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/27/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Blue AM2520MBC03 SPEC NO:DSAD1261 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/27/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 AM2520MBC03 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAD1261 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/27/2003 DRAWN: L.ZHANG PAGE: 4 OF 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: AM2520MBC03