Web page Sample & buy Tools & software Support & FAQ Document 102-1 Chip Inductors - 1008CT (2520) The 0.055 profile makes these parts ideal for low clearance applications. Their simple construction ensures high reliability and stability, and they feature much higher Part number1 1008CT-040XJE_ 1008CT-080X_E_ 1008CT-100XJE_ 1008CT-150X_E_ 1008CT-200X_E_ 1008CT-300X_E_ 1008CT-400X_E_ 1008CT-500X_E_ 1008CT-600X_E_ 1008CT-700X_E_ 1008CT-800X_E_ 1008CT-900X_E_ 1008CT-101X_E_ Inductance2 (nH) 4.7 @ 50 MHz 8.2 @ 50 MHz 10 @ 50 MHz 15 @ 50 MHz 20 @ 50 MHz 30 @ 50 MHz 40 @ 50 MHz 50 @ 50 MHz 60 @ 50 MHz 70 @ 50 MHz 80 @ 50 MHz 90 @ 50 MHz 100 @ 50 MHz SRF values than ferrite alternatives. For free evaluation samples, visit www.coilcraft.com or contact Coilcraft. Percent3SRF min5 tolerance Q min4 (MHz) 5 28 @ 500 MHz 7500 5,2 40 @ 500 MHz 5000 5 40 @ 500 MHz 2700 5,2 40 @ 500 MHz 3000 5,2 50 @ 500 MHz 2400 5,2 50 @ 500 MHz 2400 5,2 60 @ 500 MHz 2000 5,2 60 @ 500 MHz 1900 5,2,1 60 @ 500 MHz 1800 5,2,1 60 @ 500 MHz 1700 5,2,1 60 @ 500 MHz 1400 5,2 65 @ 500 MHz 1400 5,2 60 @ 500 MHz 1000 1. When ordering, specify tolerance, termination and packaging codes: 1008CT-101XJEC Tolerance: F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMDD test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Irms7 (mA) 600 600 600 600 600 600 600 600 600 510 510 500 480 DCR max6 (Ohms) 0.15 0.22 0.25 0.22 0.33 0.38 0.43 0.48 0.52 0.55 0.56 0.61 0.63 Core material Ceramic Environmental RoHS compliant, halogen free Terminations Silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 17.8 - 17.8 mg Ambient temperature -40C to +125C with Irms current Maximum part temperature +140C (ambient + temp rise). Storage temperature Component: -40C to +140C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000/7reel; 7500/13 reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 102-1 Revised 10/12/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 102-2 1008CT Series (2520) Typical Q vs Frequency Typical L vs Frequency 120 100 100 90 100 80 Q Factor 80 Inductance (nH) 90 60 nH 70 80 nH 60 4.7 nH 50 30 nH 40 30 60 nH 70 60 50 30 nH 40 30 20 20 10 10 0 80 nH 0 10 100 1000 10000 4.7 nH 1 C A E terminal A max B max C max Pick and place material J F I Terminal wraparound: approx 0.010/0,25 both ends E F 10000 I G D ref 1000 H D F 100 Frequency (MHz) Frequency (MHz) B overall 10 G H Recommended Land Pattern I J 0.115 0.110 0.050 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches 2,92 2,79 1,27 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 102-2 Revised 10/12/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 1008CT-300XGLB 1008CT-500XGLC 1008CT-101XGLC 1008CT-080XGLB 1008CT-900XJLB 1008CT-080XJLC 1008CT-300XJLC 1008CT-400XJLB 1008CT-700XGLC 1008CT-200XGLC 1008CT-800XJLC 1008CT-080XJLB 1008CT-200XJLB 1008CT-900XGLB 1008CT-150XJLC 1008CT-400XJLC 1008CT-700XGLB 1008CT-400XGLB 1008CT-101XJLB 1008CT-600XGLC 1008CT-100XJLB 1008CT-700XJLC 1008CT-200XGLB 1008CT-800XJLB 1008CT-600XGLB 1008CT-200XJLC 1008CT-800XGLC 1008CT-900XGLC 1008CT-150XJLB 1008CT-800XGLB 1008CT-500XJLC 1008CT-150XGLB 1008CT-080XGLC 1008CT-040XJLC 1008CT-100XJLC 1008CT-101XJLC 1008CT-040XJLB 1008CT-600XJLC 1008CT-600XJLB 1008CT-101XGLB 1008CT-400XGLC 1008CT-500XGLB 1008CT-300XJLB 1008CT-700XJLB 1008CT-300XGLC 1008CT-150XGLC 1008CT-900XJLC 1008CT-500XJLB