0.8mm pitch connector For PCB Straight SMT type female connector for PCB HDRA-E68FYT-( )+ Straight SMT ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 FY T- ( )+ Series name No. of contacts: 68 Type of contact FY: Straight SMT type, female Provided with board lock mechanism 0.03 0.05 2.775 2.88 0.4 26.4 3.25 0.05 30 PAD 4-o2.250.1 2-o1.2 0.05 (P.T.H.) 2.9750.05 8.40.1 32.35 26.40.05 POS.#1 0.8 0.03 POS.#2 POS.#34 10.03 3.26 0.1 Lock screw Blank: None SL : Provided (Thickness of panel: 1.12 mm) 10.7 5.2 0.05 1.175 0.40.03 0.450.05 POS.#35 2-o1.750.08 300.05 32.350.05 (Two lock screws are POS.#68 supplied with a connector.) Recommended PCB layout t=1.6mm : PAD 42.7 37.7 31.65 POS.#2 28.3 0.83.3=26.4 1 60 35 2.975 5 34 2.28 7.5 3.46 POS.#1 0.8 25 3.7 0.08 4.880.08 2.40.08 34.7 R Components Insulator Contacts Shell 37.70.08 Square nuts Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Recommended panel cut-out dimensions Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others Lock screw Hold down