66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED 6N134 OPTOCOUPLER Features: Applications: * * * * * * * * * * * DSCC Approved 8102801EX 5 MHz bandwidth typical 1500 Vdc isolation test voltage TTL compatible input and output High radiation immunity Faraday shield to provide high common mode rejection * Mii OPTOELECTRONIC PRODUCTS DIVISION Military and space High reliability systems Voltage level shifting Isolated receiver input Communication systems Medical systems DESCRIPTION The 66013 dual channel optocoupler consists of two LED's optically coupled to two high speed, high gain inverting detector gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature..........................................................................................................................................-65C to +150C Operating Free-Air Temperature Range ............................................................................................................-55C to +125C Lead Solder Temperature (For 10s, 1/16" [1.6mm] from package)................................................................................... 260C Peak Forward Input Current (each channel) .............................................................................................. 40mA (1ms duration) Average Forward Input Current (each channel)................................................................................................................. 20mA Input Power Dissipation (each channel)............................................................................................................................ 35mW Reverse Input Voltage (each channel) .................................................................................................................................... 5V Supply Voltage.........................................................................................................................................7V(1 minute maximum) Output Current - IO (each channel) ......................................................................................................................................25mA Output Power Dissipation (each channel) .........................................................................................................................40mW Output Voltage - VO (each channel)......................................................................................................................................... 7V Total Power Dissipation (both channels)..........................................................................................................................350mW Package Dimensions Schematic Diagram .800.020 [20.32] 2 A Vcc Vo1 1 0.290 [7.37] Vo2 6 14 K PIN 1 0.120 [3.05] 15 A 12 0.301 [7.65] 0.175 [4.45] 0.100 [2.54] 5 0.018 [0.46] K GND 0.011 [0.28] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 22 10 66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH SPEED 6N134 OPTOCOUPLER ELECTRICAL CHARACTERISTICS Ta=-55C TO AT 125C UNLESS OTHERWISE SPECIFIED. PARAMETER SYMBOL TYP MAX UNITS TEST CONDITIONS NOTE High Level Output Current IOH 5 250 A VCC = 5.5V, VO = 5.5V, IF = 250A 1 Low Level Output Voltage VOL 0.35 0.6 V VCC = 5.5V IF = 10mA IOL(Sinking) = 10mA 1,9 ICCH 18 28 mA VCC = 5.5V, IF = 0 ICCL 26 36 mA VCC = 5.5V, IF = 20mA 1.5 1.75 V IF = 20mA V IR = 10A 1.0 A VI--0 = 1500Vdc, Relative Humidity = 45% ta = 25C, t = 5s 2 High Level Supply Current (Both Channels) Low Level Supply Current (Both Channels) Input Forward Voltage MIN VF BVR Input-Output Insulation Leakage Current II--O Propagation Delay Time To High Output Level tPLH 45 100 ns RL = 510, CL = 50pF If = 13mA, Ta = 25C 5 Propagation Delay Time To Low Output Level tPHL 55 100 ns RL = 510, CL = 50pF If = 13mA, Ta = 25C 6 Delay Time To Low to High Output Level (90%) tLH 90 ns RL = 510, CL = 50pF IF = 13mA, Ta = 25C Delay Time To High to Low Output Level (90%) tHL 40 ns RL = 510, CL = 50pF If = 13mA, Ta = 25C TYPICAL CHARACTERISTICS PARAMETER 5 1 Input Reverse Breakdown Voltage TA = 25C, VCC = 5V EACH CHANNEL SYMBOL Input Capacitance MIN CIN vFTA Input Diode Temperature Coefficient Resistance (Input-Output) TYP UNITS TEST CONDITIONS NOTE 60 MAX pF VF = 0, f = MHz 1 -1.9 mV/C IF = 20mA 1 VI--O = 500V f = 1MHz 3 12 RI-0 3 CI-O 10 1.7 Input-Input Insulation Leakage Current II-I 0.5 Resistance (Input-Input) RI-I Capacitance (Input-Input) CI-I 10 0.80 Output Rise-Fall Time (10-90%) tf, tf 35 Common Mode Transient Immunity at High Output Level CMH 1000 10000 V/s VCM = 10V (peak), VO (min) = 2V, RL = 510, IF = OmA 7 Common Mode Transient Immunity at Low Output Level CML 1000 10000 V/s VCM = 10V (peak), VO (max) = 0.8V, RL = 510, IF = 10mA 8 Capacitance (Input-Output) 12 90 pF nA Relative Humidity = 45% VI-I = 500V, t = 5s 4 VI-I = 500V f = 1MHz 4 pF ns RL = 510, CL = 50pF 4 IF = 13mA NOTES: 1. Each channel 2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together. 3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together. 4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together. 5. The tplh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 6. The tphl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. 7. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. Vo >2.0V). 8. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. Vo < 0.8V). 9. It is essential that a bypass capacitor (.01 to 0.1F ceramic) be connected from pin 10 to pin 15. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level Each Channel IFL 0 250 A Input Current, High Level Each Channel IFH 12.5 20 mA VC 4.5 5.5 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER 66013-000 66013-001 66013-002 66013-003 PART DESCRIPTION Dual Channel Optocoupler with 100% device screening DSCC Dwg 8102801EX Dual Channel Optocoupler Dual Channel Optocoupler, Commercial, tested over full military temperature range (-55C to +125C) Dual Channel Optocoupler, Commercial (0 to 70C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 23